M. Tech. thesis supervised

Sr. No.

Year

Thesis title

Name of the student

1.       

November, 2023

Development of a framework for asphalt pavement design
incorporating loading sequence and healing in calculation
of cumulative fatigue damage

Abhinash Dev Pandey

2.       

July, 2023

Evaluation of skid resistance using images under controlled 
illumination 
(Co-supervisor: Dr. K. S. Venkatesh)

Manmohan Singh Bisht

3.       

February, 2023

Identification of saturated surface dry (SSD) condition for 
small aggregates

Ajay Kumar Meena

4.       

May, 2022

A three dimensional reconstruction of pavement surface 
using photometric stereo technique

Ayush Dugar

5.       

January, 2022

A numerical study on equivalent stiffness of porous media 
using fractured rock analogy 
(Co-supervisor: Dr. Arghya Das)

Abhishek Jain

6.       

November, 2020

Design of pavement with non-uniform surfacing thickness 
for bituminous and concrete pavement with rehabilitation 
(Co-supervisor: Dr. Manik Barman)
Amarjeet Tiwari

7.       

August, 2018

Effect of particle shape on the interlocking behavior of 
granular materials (Co-supervisor: Dr. Arghya Das)
Ashwani Kumar Bindal

8.       

July, 2017

Comparison between Winkler foundation and elastic solid 
foundation for concrete pavement analysis
Satyendra Kr. Patel

9.       

July, 2017

Characterization of shape of aggregates using surface area 
and volume
K. R. J. Reddy

10.   

July, 2016

Volumetric and microscopic study of asphalt binder 
adsorption by aggregates
Ravichandra R. Deshpande

11.   

June, 2016

Study on skid resistance of asphalt pavement surface along

different directions

Ravi Choudhary

(dual degree student)

12.   

August, 2015

Rehabilitation strategy for asphalt pavement using

reliability approach

Brijendra Gautam

13.   

July, 2015

Formulation to design batch mixes with reliability, cost and

resource considerations

(Co-supervisor: Dr. Partha Chakroborty)

Hemant Gehlot

14.   

May, 2015

Thermal stress in concrete pavement with partial separation

from underlying layer for day-time conditions

Vishal Katariya

(dual degree student)

15.   

December, 2014

Experimental study on estimation of angle of repose of

aggregates from a single source and its effect on strength

of bituminous mix

Syed Abu Rehan

16.   

July, 2014

Experimental studies on aggregate durability

(Co-supervisor: Dr. Debajyoti Paul)

Sharath M. N.

17.   

June, 2014

Study on bond strength between aggregates with

sandwiched discontinuous bitumen film

(Co-supervisor: Dr. Animangsu Ghatak)

Tatavarti Hemanth Kumar

18.   

July, 2012

Effect of angle of repose of aggregates on strength of

bituminous mix

Ashish Kumar

19.   

July, 2012

A study on influence of some fillers in bituminous mixes

Sandhya J.

20.   

August, 2011

Study of flow through porous pavement subjected to

variable rainfall (Co-supervisor: Dr. Rajesh Srivastava)

Devendra Kr. Singh

21.   

May, 2011

Effect of thickness of a sandwiched layer of bitumen

between two aggregates on the bond strength: an

experimental study

(Co-supervisor: Dr. Animangsu Ghatak)

Subrata Mondal

22.   

May, 2011

Shakedown analysis of granular pavements using various

yield criteria

Sudhir N. Varma

23.   

October, 2010

Mix design for cement grouted bituminous macadam

Islaq Khan

24.   

June, 2010

Experimental study on moisture sensitivity of some

bituminous mixes

Heena Dhasmana

25.   

May, 2010

Permeability estimation of porous asphalt mixes: a

numerical and experimental study

(Co-supervisor: Dr. Rajesh Srivastava)

Anubhai Bhargava

(dual degree student)

26.   

November, 2009

Characterization of aggregate shape in frequency domain

Raja Sekhar Bangaru

27.   

June, 2009

Some studies on rheological properties of paving bitumen

Arpan Ghosh

28.   

July, 2008

Analysis and design of composite pavement

Parthasarathi Mishra

29.   

July, 2008

Analysis of a single dowel bar embedded in concrete

pavement

Dushyant Kr. Singh

30.   

January, 2008

Overlay design by mechanistic-empirical method

(Co-supervisor: Dr.Ing. J. Stefan Bald)

Rami Reddy Bhavanam

31.   

July, 2007

Evaluation of interface bond condition between two

bituminous layers

Ravi Chandra

32.   

May, 2007

Experimental study on use of cemented materials for

pavements

Pravin Kolhe Shivaji

33.   

May, 2007

Effect of aggregate gradation on the mechanical property

of asphalt mix - a numerical study

(Co-supervisor: Dr. Sumit Basu)

Ashok Singh

34.   

May, 2006

Experimental and numerical study on mechanical

behaviour of asphalt mix

(Co-supervisor: Dr. Sumit Basu)

Kalhan Mitra

35.   

June, 2005

Bituminous mix design for hot central plant recycling

Aravind K.

36.   

May, 2005

Micromechanical analysis of asphalt mix

(Co-supervisor: Dr. Sumit Basu)

Ranja Bandyopadhyaya

37.   

August, 2004

Estimation of volumetric parameters of bituminous mix

using digital image processing

(Co-supervisor: Dr. Onkar Dikshit)

Anubhav Tiwari

38.   

July, 2004

Recycling of bituminous mix

Prasant K. Sahu

39.   

April, 2004

Reliability considerations of bituminous pavement design

by Mechanistic-Empirical approach

Avijit Maji

40.   

November, 2003

Analysis of multilayered flexible pavement using FEM

(Co-supervisor: Dr. C. S. Upadhyay)

Shankar Kumar

41.   

April, 2003

Fatigue performance of bituminous mixes

Ramakant Dwivedi

42.   

April, 2002

Development of alternative gradation and modification of

mix design approach for Bituminous Concrete (BC) from

fatigue life consideration

Pijush Ghosh

43.   

February, 2002

Backcalculation of pavement layer moduli from falling

weight deflectometer using artificial neural network

Sunil Sharma

 

M. Tech. project supervised

Sr. No.

Year

Thesis title

Name of the student

1.  

August, 2020

A study on viscoelastic Poisson's ratio of asphalt mix

Aditya Agrawal

 

 

sy01265_