Education

  • Post Doc. 1999-2001

    Engine Research Center, University of Wisconsin, Madison, USA

  • Ph.D. 1996-1999

    Centre for Energy Studies, Indian Institute of Technology, Delhi

  • M.Tech.1995-1996

    Centre for Energy Studies, Indian Institute of Technology, Delhi

  • B.Tech.1990-1994

    Malaviya Regional Engineering College, Jaipur

Academic Positions

  • Director 2024- Present

    Director (May 2024- Present)

    Indian Institute of Technology, Jodhpur

  • Prof. 2012- Present

    Professor (Mar 2012- Present)

    Department of Mechanical Engineering, Indian Institute of Technology, Kanpur

  • Asso. Prof. 2007- 2012

    Associate Professor (December 2007- March 2012)

    Department of Mechanical Engineering, Indian Institute of Technology, Kanpur

  • Assist. Prof. 2001- 2007

    Assistant Professor (March 2001- December 2007)

    Department of Mechanical Engineering, Indian Institute of Technology, Kanpur

Areas of Interest

  • Internal Combustion Engines
  • Regulated/ Unregulated Emissions
  • Particulate Characterization and Control
  • Exhaust Gas After-Treatment using DOC/ DPF
  • Emission Toxicology
  • Gasoline Direct Injection (GDI) Engines
  • Gasoline Compression Ignition (GCI) Engines
  • Low-Temperature Combustion (HCCI/PCCI/RCCI) Engines
  • CNG/ Hydrogen/ HCNG
  • Biodiesel, Biofuels, Methanol, Ethanol, and Butanol
  • Dimethyl Ether (DME) and Diethyl Ether (DEE)
  • Laser Ignition of Combustible Mixtures
  • Combustion Visualization Using Schlieren/ Shadowgraphy
  • Optical Diagnostics of Engine Combustion
  • Particle Image Velocimetry (PIV) for In-Cylinder Flow Visualization
  • Phase Doppler Interferometry (PDI) for Dense Spray Characterization
  • Lubricating Oil Characterization and Tribology
  • Engine Simulation (1-D and 3-D)
  • Life Cycle Assessment
  • Total Cost of Ownership Analysis

Administrative Position

  • Period:2023

    Organization:Coordinator of LEADS (Leadership in Science) Program of the Indian National Science Academy (INSA) and National Center for Good Governance (NCGG)

    Nature of Responsibility:Coordinator Responsible for Organizing the Program in India (12-18 July 2023)

    Designation:Chairman, Organizing Committee

  • Period:2020

    Organization:Coordinator of LEAP (Leadership in Academics) Program of Ministry of Education (MoE) under Pandit Madan Mohan Malviya National Mission on Teachers and Teaching (PMMMNMTT)

    Nature of Responsibility:Coordinator Responsible for Organizing the Program in India (Feb-March 2021) and Foreign (June 2022) Legs

    Designation:Chairman, Organizing Committee

  • Period:6/2018-11/2020

    Organization:IITK Research and Technology Park

    Nature of Responsibility:Founder Director & Coordinator

    Designation:Professor-in Charge

  • Period:2013-15

    Organization:Fluid and Thermal Sciences

    Nature of Responsibility:Coordination of FTS Stream

    Designation:Stream Convener

  • Period:2005-08

    Organization:Hall of Residence 2, IIT Kanpur

    Nature of Responsibility:Warden

    Designation:Warden

  • Period:2006-07

    Organization:Program Post-Graduate Committee,
    Environmental Engineering Program,
    Civil Engineering Department, IIT Kanpur

    Nature of Responsibility:Coordinating the Master’s Program of Environmental Engineering and Management

    Designation:Chairman

Summary of Publications and Academic impact (As on 1st March 2023)

International Peer-Reviewed Papers

H Index

Citations

I-10 Index

International Conference Papers

Number of Patents

Google Scholar

Scopus

Google Scholar

Scopus

Google Scholar

Scopus

522 (Scopus)

67

56

24257

16122

274

210

127

3


No. of Books

Book Chapters

PhD Thesis Guidance

MTech Guidance

Sponsored / Consultancy Projects

Extra Mural Funding

Outreach (QIP Course)

Int. Events Organised

65

135

14 Graduated, 10 Ongoing

60 Graduated, 3 Ongoing

33 Completed, 8 Ongoing

60.00 Crores

17 (1 week) +
2 (2 weeks)

7 Workshops 7 conferences

Awards and Honours

  • 2022
    Awards & Fellowships recieved in 2022
    image
    SAE India Foundation Guru Award-2022.
    image
    WSSET Innovation Award-2022 in “Renewable Energy Systems” category by WSSET (World Society for Sustainability Energy Technology, UK) in SET-22 held in Istanbul, Turkey from August 16-18, 2022.
    image
    State Bank of India Endowed Chair Professor, IIT Kanpur (2022-25).
    image
    Distinguished Alumnus Award-2022 from Indian Institute of Technology Delhi.
  • 2021
    Awards & Fellowships recieved in 2021
  • 2019
    Awards & Fellowships recieved in 2019
  • 2018
    Awards & Fellowships recieved in 2018
  • 2017
    Awards & Fellowships recieved in 2017
  • 2004-16
    Awards & Fellowships recieved between 2004- 2016
  1. Organizing Secretary for the "International Workshop on Advances in Combustion Science and Technology" from December 31st, 2007, to January 2nd, 2008, at IIT Kanpur. (Co-organizer: Prof. Abhijit Kushari, AE)
  2. Organizing Chairman, Finance for the "Energy Conclave" attended by more than 500 delegates, Eight days mega energy event from January 8th – 15th, 2010, at IIT Kanpur.
  3. Organizing Secretary for the "International Workshop on Advances in Combustion Science and Technology" from January 10th to January 12th, 2010, at IIT Kanpur. (Co-organizer: Prof. Abhijit Kushari, AE)
  4. Organizing Secretary for the 1st ISEES International Workshop on "Novel Combustion Concepts for Sustainable Energy Development" from 2nd January 2014 - 4th January 2014 at IIT Kanpur. (Co-organizer: Prof. Abhijit Kushari, AE)
  5. Organizing Secretary for the 2nd ISEES International Workshop on "Sustainable Energy, Power, and Propulsion" January 5th -7th, 2015, at Jadavpur University, Kolkata, India. (Co-organizer: Prof. Achintya Mukhopadhyay, JU; Prof. Swarnendu Sen, JU, Prof. Abhijit Kushari, AE, IITK)
  6. Organizing Secretary for the 3rd ISEES International Workshop on "Sustainable Energy, Environment & Safety with Railway Centric Theme,” December 21st -23rd, 2015 at Hotel Clarks Awadh, Lucknow, India. (Co-organizer: Sh. R N Misra, RDSO, Lucknow, Sh. Pradeep Gupta, RITES, Gurgaon)
  7. Conference Chair for the 1st ISEES International Conference on "Sustainable Energy and Environmental Challenges (SEEC-2017)," 26th-28th February 2017 at Center of Innovative and Applied Bioprocessing (CIAB), Mohali, India. (General Chair: Prof. Ashok Pandey, CIAB, Mohali, Organizing Secretaries: Prof. Santanu De, Prof. Atul Dhar, Prof. D K Srivastava).
  8. Conference Co-Chair for the 2nd ISEES International Conference on "Sustainable Energy and Environmental Challenges (SEEC-2018)," 31st December 2017-3rd January 2018 at J N Tata Auditorium, Indian Institute of Science, Bangalore, India. (General Chair: Prof. Pradip Dutta, Prof. Ashok Pandey; Conference Co-Chair: Prof. Saptarshi Basu; Organizing Secretaries: Dr Swetaprovo Chaudhuri, IISc Bangalore, Dr Santanu De, IIT Kanpur, Dr Atul Dhar, IIT Mandi, and Dr Venkata Mohan, IICT Hyderabad).
  9. Conference Co-Chair for the 3rd ISEES International Conference on "Sustainable Energy and Environmental Challenges (3rd SEEC)," 18th -21st December 2018 at Indian Institute of Technology, Roorkee, India. (General Chair: Prof. Ashok Pandey; Conference Co-Chair: Prof. BR Gurjar and Prof. S L Soni).
  10. Conference Co-Chair for the 4th ISEES International Conference on "Sustainable Energy and Environmental Challenges (4th SEEC)," 27-29th November 2019, at National Environmental Engineering Research Institute, Nagpur, India. (General Chair: Prof. Ashok Pandey; Conference Co-Chair: Prof. P Padole, Organizing Secretary: Dr Nitin Labhsetwar, NEERI).
  11. Conference Chair for the 5th ISEES International Conference on "Sustainable Energy and Environmental Challenges (5th SEEC)," in Virtual Mode from 19-21st December 2020 via Zoom. (General Chair: Prof. Ashok Pandey; Conference Conveners: Dr Pravesh Chandra Shukla, IIT Bhilai, Dr Swatantra Pratap Sing, IIT Bombay, Dr Anil K Patel, CEES, Lucknow, Organising Secretary: Dr Akhilendra Pratap Singh, Sh. Dhananjay Kumar, Utkarsha Sonawane, IIT Kanpur)
  12. Conference Chair for the 6th ISEES International Conference on "Sustainable Energy and Environmental Challenges (6th SEEC)," in Hybrid Mode from 27-29th December 2021 at Hotel Ramada, Lucknow. (General Chair: Dr Ashok Pandey, IITR, Lucknow; Conveners: Dr Akhilendra Pratap Singh, IIT BHU, Varanasi, Dr Sunita Varjani, GPCB, Gandhinagar, Mr Dhananjay Kumar, IIT Kanpur, Ms Utkarsha Sonawane, IIT Kanpur)
  13. Conference Chair for the 7th ISEES International Conference on "Sustainable Energy and Environmental Challenges (7th SEEC)," from 16-18th December 2022 at IIT BHU, Varanasi. (General Chair: Dr Ashok Pandey, IITR, Lucknow, Conference Secretary: Dr Akhilendra Pratap Singh, IIT BHU, Varanasi).
  1. Course No. & Title:ME341A: Heat Transfer

    UG/ PG:UG

    Number of Times:2 (2016-17, II Sem, 2018-19 II Sem)

  2. Course No. & Title:ME 301: Energy Systems I

    UG/ PG:UG

    Number of Times:6 (06-07 II Sem, 07-08 II Sem, 11-12 I Sem, 12-13 II Sem, 13-14 I Sem, 21-22 I Sem)

  3. Course No. & Title:ME304: Energy Conversion

    UG/ PG:UG

    Number of Times:1 (01-02 II Sem)

  4. Course No. & Title:ME359: Internal Combustion Engines

    UG/ PG:UG

    Number of Times:6 (03-04 I Sem, 04-05 I Sem, 05-06 I Sem, 15-16 I Sem, 18-19 I Sem, 20-21 II Sem, 22-23 I Sem)

  5. Course No. & Title:ESO 201: Thermodynamics (Tutorial )

    UG/ PG:UG

    Number of Times:18 (01-02 I Sem, 02-03 I Sem, 04-05 I Sem, 06-07 I Sem, 07-08 I Sem, 07-08 II Sem, 09-10 I Sem, 10-11 I Sem. 10-11 II Sem, 11-12 I Sem, 12-13 I Sem, 14-15 I Sem, 16-17 I Sem, 17-18 I Sem, 17-18 II sem, 18-19 I Sem, 19-20 I Sem, 20-21 I Sem)

  6. Course No. & Title:ESO 201: Thermodynamics (Instructor)

    UG/ PG:UG

    Number of Times:2 [14-15 II Sem (200 Students), 2023-24 I Sem (550 Students)]

  7. Course No. & Title:ME100: Introduction to Profession

    UG/ PG:UG

    Number of Times:2 (06-07 II Sem, 08-09 II Sem)

  8. Course No. & Title:ME372: Energy Conversion (Laboratory)

    UG/ PG:UG

    Number of Times:3 (01-02 II Sem, 02-03 II Sem, 05-06 I Sem)

  9. Course No. & Title:TA201N: Introduction to Manufacturing Processes (Tutorial)

    UG/ PG:UG

    Number of Times:3 (03-04 II Sem, 05-06 II Sem, 09-10 II Sem)

  10. Course No. & Title:ME641: Conduction and Radiation

    UG/ PG:PG

    Number of Times:2 (01-02 I Sem, 02-03 I Sem)

  11. Course No. & Title:ME690: Alternate Fuels and Advances in IC Engines

    UG/ PG:PG

    Number of Times:19 (02-03 II Sem, 03-04 II Sem, 04-05 II Sem, 05-06 II Sem, 06-07 I Sem, 07-08 I Sem, 08-09 II Sem, 09-10 II Sem, 10-11 II Sem, 11-12 I Sem, 12-13 I sem, 13-14 I sem, 14-15 I Sem, 15-16 I Sem, 16-17 I Sem, 17-18 I Sem, 19-20 I Sem, 20-21 I Sem, 21-22 II Sem, 22-23 II Sem)

  12. Course No. & Title:ME691: Engine Management

    UG/ PG:PG

    Number of Times:5 (08-09 I Sem, 09-10 I Sem, 10-11 I Sem, 13-14 II Sem, 19-20 II Sem)

  13. Course No. & Title:ME741: Combustion Engines and Pollution

    UG/ PG:PG

    Number of Times:3 (05-06 II Sem, 15-16 II Sem, 17-18 II Sem)

Teaching appreciation by Senate and Director, IITK

  1. 2001-02 (I Sem: ESO 202 Tut)
  2. 2002-03 (I Sem: ME641)
  3. 2005-06 (I sem: ME 690)
  4. 2006-07 (I Sem: ME690)
  5. 2009-10 (I Sem: ME 691)
  6. 2010-11 (I Sem: ESO 202 Tut)
  7. 2010-11 (I Sem: ME691)
  8. 2010-11 (II Sem: ME690)
  9. 2011-12 (I Sem: ESO 202 Tut)
  10. 2012-13 (I Sem: ME 690A)
  11. 2014-15 (I Sem: ME690A)
  12. 2015-16 (I Sem: ME 690A)
  13. 2016-17 (I Sem: ME 690A)
  14. 2017-18 (I Sem: ME 690A)
  15. 2019-20 (I Sem: ME 690A)
  16. 2022-23 (I Sem: ME359A)
  1. A one-week short course sponsored by Quality Improvement Program for engineering college teachers and industry professionals entitled "Alternative fuels, emissions and latest advances in Diesel engines" from 23-28th December 2002. (Coordinator: Dr Avinash Kumar Agarwal).
  2. A one-week short course sponsored by Quality Improvement Program for engineering college teachers and industry professionals entitled "Renewable Energies and Alternative Fuels” from 1st to 5th December 2003. (Coordinator: Dr Avinash Kumar Agarwal).
  3. A one-week short course sponsored by Chattisgarh Government for engineering college teachers entitled "Alternative Fuels and advances in Engines" at Government Engineering College, Raipur from 16-20th October 2004. (Coordinator: Dr Avinash Kumar Agarwal).
  4. A one-week short course sponsored by Quality Improvement Program for engineering college teachers and industry professionals entitled "Alternative Fuels and Emission Control" from 24th-28th November 2004. (Coordinator: Dr Avinash Kumar Agarwal).
  5. A one-week short course sponsored by Quality Improvement Program for engineering college teachers and industry professionals entitled “Advances in Materials & Fuel Technologies for Automotive Applications” from 8th-12th June 2006. (Coordinator: Dr Avinash Kumar Agarwal, Dr Ashish Garg)
  6. A one-week short course sponsored by Research Designs and Standards Organization, Indian Railway for engineers from Engine Development Directorate “Fundamentals of Internal Combustion Engines” from 23rd – 27th March 2007. (Coordinator: Dr Avinash Kumar Agarwal)
  7. A one-week short course sponsored by Research Designs and Standards Organization, Indian Railway for engineers from Engine Development Directorate “Advanced Internal Combustion Engine Technology” from 13th – 17th September 2007. (Coordinator: Dr Avinash Kumar Agarwal)
  8. A one-week short course sponsored by Quality Improvement Program for engineering college teachers and industry professionals entitled “Diesel Engine Management” from 18th-22nd March 2009. (Coordinator: Dr Avinash Kumar Agarwal)
  9. A one-week short course sponsored by Quality Improvement Program for engineering college teachers and industry professionals entitled “Diesel Particulate and NOx Emissions” February 14 - 18, 2010. (Coordinator: Dr Avinash Kumar Agarwal, Dr Tarun Gupta)
  10. A one-week short course sponsored by Quality Improvement Program for engineering college teachers and industry professionals entitled “Diesel Particulate and NOx Emissions: Formation and Control,” September 10-14, 2010. (Coordinator: Dr Avinash Kumar Agarwal, Dr Tarun Gupta)
  11. A one-week short course sponsored by Quality Improvement Program for engineering college teachers and industry professionals entitled “Advanced Engine Combustion and Diagnostics,” June 23- 28, 2011. (Coordinator: Dr Avinash Kumar Agarwal, Dr Tarun Gupta)
  12. A one-week short course sponsored by Quality Improvement Program for engineering college teachers and industry professionals entitled “Engine Emission Formation and Control,” June 28- July 3, 2011. (Coordinator: Dr Tarun Gupta, Dr Avinash Kumar Agarwal)
  13. A one-week short course sponsored by Quality Improvement Program for engineering college teachers and industry professionals entitled “Advanced Engine Combustion and Emission Control,” from July 17-22, 2012. (Coordinator: Dr Avinash Kumar Agarwal)
  14. A one-week short course sponsored by Quality Improvement Program for engineering college teachers and industry professionals entitled "Advanced Engine Technologies for Combustion and Emission Control" May 1-5, 2013 (Coordinator: Dr Avinash Kumar Agarwal).
  15. A one-week short course sponsored by Quality Improvement Program for engineering college teachers and industry professionals entitled "Advanced Combustion, Emissions, and Modeling Aspects,” May 7-11, 2014 (Coordinator: Dr Avinash Kumar Agarwal).
  16. A two-week TEQIP short course for the UG students of Govt. College of Engineering and Textile Technology, Berhampore, W.B. entitled “Combustion: Theory and Industrial Applications” from March 10-19, 2017 (Co-Coordinator: Dr Avinash Kumar Agarwal).
  17. A two-week TEQIP short course for the UG students of Govt. Women Engineering College Ajmer, Rajasthan, entitled “IC Engines, Combustion: Theory and Industrial Applications” from March 20-30, 2017 (Coordinator: Dr Avinash Kumar Agarwal).
  18. A one-week short course sponsored by the Quality Improvement Program for engineering college teachers and industry professionals entitled “Advanced Course on Engine Combustion, Diagnostics, Emissions Control, and Emerging Fuels” from August 3 to 7, 2018. (Coordinator: Dr Avinash Kumar Agarwal).
  19. A one-week short course sponsored by the Quality Improvement Program for engineering college teachers and industry professionals entitled “Design of Engines for Emission Compliance” from April 17-21, 2019. (Coordinator: Dr Avinash Kumar Agarwal).

    2023

  1. Ankur Kalwar, Quangkhai Pham, Mengzhao Chang, Suhan Park, Sungwook Park, Avinash Kumar Agarwal*, “Numerical Study of Direct Injection Spray Behavior of Gasoline and Methanol-Gasoline Blends Under Split-Injection Strategy in Engine-Like Conditions”, Accepted for publication in Atomization and Sprays on 31st July 2023.
  2. Dhananjay Kumar, Avinash Kumar Agarwal*, “Macroscopic Spray Characteristics of Gasoline, Methanol, and Ethanol in Direct Injection Spark Ignition Engine-Like Conditions”, Accepted for publication in Atomization and Sprays on 31st July 2023.
  3. Avinash Kumar Agarwal*, Hardikk Valera, Vikram Kumar, Shanti Mehra, Nalini Kant Mukherjee, Devendra Nene, “Cyclic Combustion Variability of DME-Fueled Agricultural Tractor Engine”, Accepted for publication in ASME Open Journal of Engineering on (Ref. No AOJE-23-1059) on 22nd July 2023.
  4. Scott Curran, Angelo Onorati, Raul Payri, Avinash Kumar Agarwal, Constantine Arcoumanis, Choongsik Bae, Konstantinos Boulouchos, Flavio Dal Forno Chuahy, Manolis Gavaises, Gregory J. Hampson, Christian Hasse, Brian Kaul, Song-Charng Kong, Dhananjay Kumar, Ricardo Novella, Apostolos Pesyridis, Rolf Reitz, Bianca M. Vaglieco, and Nicole Wermuth, “The Future of Ship Engines: Renewable fuels and enabling technologies for decarbonization”, Accepted for publication in International Journal of Engine Research.
  5. Ankur Kalwar, Rahul Kumar Singh, Ankit Gupta, Ranjeet Rajak, Gokul Gosakan, Avinash Kumar Agarwal*, “Particulate, Unregulated and Regulated Emissions and Catalytic Converter Efficiency Evaluation of Methanol (M15) Fuelled BS-VI Compliant Light-Duty Spark-Ignition Engine,”  Accepted for publication in the Science of The Total Environment on on 2nd August 2023.
  6. Avinash Kumar Agarwal*, Vikram Kumar, Shanti Mehra, Nalini Kanta Mukherjee, Hardikk Valera, Devendra Nene, “Macroscopic and Microscopic Spray Characteristics of Dimethyl Ether in a Constant Volume Spray Chamber Using a Mechanical Fuel Injection System for Automotive Applications”, Accepted for publication in ASME Open Journal of Engineering on 4th August (Ref. No. AOJE-23-1062).
  7. Utkarsha Sonawane, Avinash Kumar Agarwal*, “Simulation Study of Spray Atomization and Evaporation Characteristics of Di-Methyl Ether to Improve Cold-Start Issues of Diesel Engines”, Accepted for publication in ASME Journal of Energy Resources Technology (Ref. No JERT-23-1170).
  8. Avinash Kumar Agarwal*, Vishnu Singh Solanki, M. Krishnamoorthi, “Experimental Evaluation of Pilot and Main Injection Strategies on Gasoline Compression Ignition Engine – Part 1: Combustion Characteristics”, SAE Journal of Engines, Vol 16(6), November 2023. (Impact Factor2022: 1.867; DOI:10.4271/03-16-06-0046; ISSN: 1946-3936)
  9. Avinash Kumar Agarwal*, Vishnu Singh Solanki, M. Krishnamoorthi, “Experimental Evaluation of Pilot and Main Injection strategies on Gasoline Compression Ignition Engine – Part 2: Performance and Emissions Characteristics”, SAE Journal of Engines, Vol 16(6), November 2023. (Impact Factor2022: 1.867; DOI:10.4271/03-16-06-0047; ISSN: 1946-3936).
  10. Ashutosh Jena, Utkarsha Sonawane, Avinash Kumar Agarwal*, “Partially Premixed Combustion of Diesel-Di-Ethyl Ether Blends in Light-Duty Commercial Engine”, FUEL, Volume 345, pp 128197, August 2023. (Impact Factor2022: 8.035; DOI: 10.1016/j.fuel.2023.128197; ISSN # 0016-2361).
  11. Avinash Kumar Agarwal*, Shanti Mehra, Vikram Kumar, Hardikk Valera, Nalini Kant Mukherjee, Devendra Nene, “Dimethyl Ether Fuel Injection System Development for a Compression Ignition Engine for Increasing the Thermal Efficiency and Reducing Emissions”, Energy Conversion and Management, Volume 287, pp. 117067, July 2023. (Impact Factor2022: 11.533; 10.1016/j.enconman.2023.117067; ISSN # 0196-8904).
  12. Tao Cai, Dan Zhao, Lin Ji, and Avinash Kumar Agarwal, “Removal and Mechanism Analysis of NOx Emissions in Carbon-free Ammonia Combustion Systems with a Secondary Fuel Injection,”  FUEL, Volume 344, pp 128088, July 2023. (Impact Factor2022: 8.035; DOI: doi.org/10.1016/j.fuel.2023.128088; ISSN # 0016-2361).
  13. Ayush Tripathi, Avinash Kumar Agarwal*, “Characterisation of Particulates and Trace Metals Emitted by a DME Fuelled Genset Engine Prototype”, Environmental Pollution, Volume 329, pp121649, July 2023.  (Impact Factor2022: 9.988; DOI: /10.1016/j.envpol.2023.121649; ISSN # 0269-7491).
  14. Ankur Kalwar, Akhilendra Pratap Singh, Avinash Kumar Agarwal*, Potential of Di-Ethyl Ether in Reducing Emissions from Heavy-Duty Tractors, SAE Technical Paper 2023-01-0285, April 2023. DOI: 10.4271/2023-01-0285.
  15. Utkarsha Sonawane, Ashutosh Jena, Avinash Kumar Agarwal*, “Influence of Fuel Injection Pressure on Spray Characteristics of Diesel-Diethyl Ether Blends for diesel engine applications: An Experimental Approach”. SAE Technical Paper 2023-01-0285, April 2023. DOI: 10.4271/2023-01-0309.
  16. Avinash Kumar Agarwal*, Akhilendra P. Singh, Vikram Kumar, “Effect of Pilot Injection Strategy on the Methanol-Mineral Diesel Fueled Reactivity Controlled Compression Ignition Combustion Engine,” FUEL, Volume 338, pp 127115, April 2023. (Impact Factor2022: 8.035; DOI: 10.1016/j.fuel.2022.127115; ISSN # 0016-2361).
  17. Avinash K Agarwal*, Vishnu Singh Solanki, M Krishnamoorti, “Gasoline Compression Ignition (GCI) Combustion in a Light-Duty Engine Using Double Injection Strategy” Applied Thermal Engineering, Volume 223, pp. 120006, March 2023. (Impact Factor2022: 6.465; DOI: 10.1016/j.applthermaleng.2023.120006; ISSN # 1359-4311).
  18. Quangkhai Pham, Mengzhao Chang, Ankur Kalwar, Avinash Kumar Agarwal, Sungwook Park, Byungchul Choi*, and Suhan Park*, Macroscopic Spray Characteristics and Internal Structure Studies of Natural Gas Injection, Energy, Vol. 263, Part E, pp 126055, January 2023. (Impact Factor2022: 8.857; DOI: 10.1016/j.energy.2022.126055; ISSN # 0360-5442).
  19. 2022

  20. Avinash Kumar Agarwal*, M. Krishnamoorthi, “Review of Morphological and Chemical Characteristics of Particulates from Compression Ignition Engines”, Accepted for publication in International Journal of Engine Research (Ref. No. IJER-22-0060). (Impact Factor2022: 3.874; DOI: ; ISSN # 1468 0874).
  21. Ashutosh Jena, Akhilendra Pratap Singh, Avinash Kumar Agarwal*, “Optical and Computational Investigations of the Effect of Spray-Swirl Interactions on Autoignition and Soot Formation in a Compression Ignition Engine Fuelled by Diesel, Dieseline and Diesohol”, Accepted for publication in Applied Energy (Ref. No. APEN-S-22-02377).
  22. Dhananjay Kumar, Utkarsha Sonawane, Krishn Chandra, and Avinash Kumar Agarwal*, “Experimental Investigations of Methanol Fumigation Via Port Fuel Injection in Preheated Intake Air in a Single Cylinder Agricultural Diesel Engine”, FUEL. (Impact Factor2022: 8.035; DOI: doi.org/10.1016/j.fuel.2022.124340; ISSN # 0016-2361).
  23. Chetankumar Patel, Joonsik Hwang, Choongsik Bae, Avinash Kumar Agarwal*, "Regulated, Unregulated, and Particulate Emissions From Biodiesel Blend Fueled Transportation Engine ”, International Journal of Automotive Technology. DOI: doi.org/10.1115/1.4048939
  24. Akhilendra Pratap Singh, Ashutosh Jena, Avinash Kumar Agarwal*, “Multiple Fuel Injection Strategy for Premixed Charge Compression Ignition Combustion Engine Using Biodiesel Blends”, International Journal of Engine Research (Ref. No IJER-21-0134). (Impact Factor2022: 3.874; DOI: doi.org/10.1177/14680874211066743; ISSN # 1468 0874).
  25. Avinash K. Agarwal*, Akhilendra P. Singh, Antonio García, Javier Monsalve-Serrano, “Challenges and Opportunities for Application of Reactivity-Controlled Compression Ignition Combustion in Commercially Viable Transport Engines”, Progress in Energy and Combustion Science, Vol. 93, pp 101028-1-47, November 2022. (Impact Factor2022: 35.339; DOI: 10.1016/j.pecs.2022.101028; ISSN # 0360-1285).
  26. Utkarsha Sonawane, Avinash Kumar Agarwal* “Computational Investigations of Spray Atomisation and Evaporation under Cold-Start Conditions of a Diesel Engine”, ASME Journal of Energy Resources Technology, Vol. 144(11), November 2022, pp. 112305. (Impact Factor2022: 3.070; DOI: doi.org/10.1115/1.4054137; ISSN # 0195-0738).
  27. Amir F.N. Abdul-Manan*, Victor Gordillo Zavaleta, Avinash Kumar Agarwal, Gautam Kalghatgi, Amer A. Amer, “Electrifying passenger road transport in India requires near-term electricity grid decarbonization” NATURE Communications, 13, 2095 (2022). (Impact Factor2022: 17.694; DOI: doi.org/10.1038/s41467-022-29620-x; ISSN # 2041-1723).
  28. Nalini Kanta Mukherjee, Hardikk Valera, Sarat Unnithan, Vikram Kumar, Vipin Dhyani, Shanti Mehra, Ayush Tripathi, Devendra Nene, Avinash Kumar Agarwal*, “Feasibility Study of Novel DME Fuel Injection Equipment: Part 1- Fuel Injection Strategies and Spray Characteristics”, FUEL, Vol. 323 (2022) 124333. (Impact Factor2022: 8.035; DOI: doi.org/10.1016/j.fuel.2022.124333; ISSN # 0016-2361).
  29. Nalini Kanta Mukherjee, Hardikk Valera, Sarat Unnithan, Vikram Kumar, Vipin Dhyani, Shanti Mehra, Rahul Kumar Singh, Devendra Nene, Avinash Kumar Agarwal*, “Feasibility Study of Novel DME Fuel Injection Equipment: Part 2- Performance, Combustion, Regulated and Unregulated Emissions” FUEL, Vol. 323 (2022) 124338. (Impact Factor2022: 8.035; DOI: doi.org/10.1016/j.fuel.2022.124338; ISSN # 0016-2361).
  30. Akhilendra Pratap Singh, Utkarsha Sonawane, Avinash Kumar Agarwal*, “Methanol/ Ethanol/ Butanol-Gasoline Blends Use in Transportation Engine-Part 1: Combustion, Emissions, and Performance Study”, ASME Journal of Energy Resources Technology, Vol. 144(10), October 2022, pp 102304-1-11. (Impact Factor2022: 3.070; DOI: doi.org/ 10.1115/1.4053985; ISSN # 0195-0738).
  31. Akhilendra Pratap Singh, Utkarsha Sonawane, Avinash Kumar Agarwal*, “Methanol/ Ethanol/ Butanol-Gasoline Blends Use in Transportation Engine-Part 2: Composition, Morphology and Characteristics of Particulates”, ASME Journal of Energy Resources Technology, Vol. 144(10), October 2022, pp 102305-1-11. (Impact Factor2022: 3.070; DOI: doi.org/10.1115/1.4053986; ISSN # 0195-0738).
  32. Quangkhai Pham, Sungwook Park, Avinash Kumar Agarwal, Suhan Park*, “Review of Dual-Fuel Combustion in the Compression-Ignition Engines: Spray, Combustion, and Emission”, Energy, Volume 250, July 2022, pp. 123778. (Impact Factor2022: 8.857; DOI: 10.1016/j.energy.2022.123778; ISSN # 0360-5442).
  33. Avinash Kumar Agarwal*, Vikram Kumar, Ashutosh Jena, Ankur Kalwar, “Fuel Injection Strategy Optimisation and Experimental Performance and Emissions Evaluation of Diesel Displacement by Port Fuel Injected Methanol in a Retrofitted Mid-Size Genset Engine Prototype,” Energy, 248, June 2022, pp 123593. (Impact Factor2022: 8.857; DOI: doi.org/10.1016/j.energy.2022.123593; ISSN # 0360-5442).
  34. Hardikk Valera, Dhananjay Kumar, Avinash Kumar Agarwal*, “Evaluating the Effect of Variable Methanol Injection Timings in a Novel Co-Axial Fuel Injection System Equipped Locomotive Engine”, Journal of Cleaner Production, Volume 349, May 2022, pp. 131452. (Impact Factor2022: 11.072; DOI:10.1016/j.jclepro.2022.131452; ISSN # 0959-6526).
  35. A. Onorati, R. Payri, B. M. Vaglieco, Avinash Kumar Agarwal, C. Bae, G. Bruneaux, M. Canakci, M. Gavaises, M. Günthner, C. Hasse, S. Kokjohn, S. C. Kong, Y. Moriyoshi, R. Novella, A. Pesyridis, R. Reitz, T. Ryan, R. Wagner, H. Zhao, “The role of hydrogen for future internal combustion engines”, Editorial, International Journal of Engine Research, Vol. 22(4), April 2022, pp 529-540. (Impact Factor2022: 3.874; DOI: 10.1177/14680874221081947; ISSN # 1468 0874).
  36. Nikhil Sharma, Avinash Kumar Agarwal*, “Microscopic Spray Characteristics of Ethanol and Methanol Blended Gasoline in a Direct Injection Spark Ignition Engine,” International Journal of Engine Research, 23(3), March 2022, pp 482 - 496. (Impact Factor2022: 3.874; DOI: 10.1177/1468087420987763; ISSN # 1468 0874).
  37. Nikhil Sharma, Avinash Kumar Agarwal*, “Particulate Emission Reduction by Fuel Injection Timing Optimization in a Gasoline Direct Injection Engine”, ASME Journal of Energy Resources Technology, 144(3), March 2022, pp. 032302 (Impact Factor2022: 3.070; DOI: doi.org/ 10.1115/1.4051380; ISSN # 0195-0738).
  38. Avinash Kumar Agarwal*, Yeshudas Jiotode, and Nikhil Sharma, “Time-Resolved Endoscopic Evaluation of Spatial Temperature and Soot Distribution in a Butanol-Diesel Blend Fuelled Direct Injection Compression Ignition Engine,” ASME Journal of Energy Resources Technology, February 2022, 144(2): 022307. (Impact Factor2022: 3.070; DOI: doi.org/10.1115/1.4051173; ISSN # 0195-0738).
  39. Avinash Kumar Agarwal*, Akhilendra P. Singh, Vikram Kumar, “Reactivity Controlled Compression Ignition Engine Fueled with Mineral Diesel and Butanol at different Premixed Ratios and Varying Loads,” ASME Journal of Energy Resources Technology, February 2022, 144(2): 022304 (9 pages). (Impact Factor2022: 3.070; DOI: 10.1115/1.4051037; ISSN # 0195-0738).
  40. Avinash Kumar Agarwal*, Prashumn, Krishna Chandra, “Di-Ethyl Ether-Diesel Blends Fuelled Off-Road Tractor Engine: Part-I: Technical Feasibility”, FUEL, Volume 308, January 2022, pp. 121972. (Impact Factor2022: 8.035; DOI: doi.org/10.1016/j.fuel.2021.121972; ISSN # 0016-2361).
  41. Avinash Kumar Agarwal*, Prashumn, Hardikk Valera, Nirendra Nath Mustafi, “Di-Ethyl Ether-Diesel Blends Fuelled Off-Road Tractor Engine: Part-II: Unregulated and Particulate Emission Characteristics” FUEL, Volume 308, January 2022, pp. 121973. (Impact Factor2022: 8.035; DOI: doi.org/10.1016/j.fuel.2021.121973; ISSN # 0016-2361).
  42. 2021

  43. Jai Gopal Gupta, Avinash Kumar Agarwal*, “Engine Durability and Lubricating Oil Tribology Study of a Biodiesel Fuelled Common Rail Direct Injection Medium-Duty Transportation Diesel Engine”, WEAR, 486-487, December 2021, pp 204102. (Impact Factor2022: 4.695; DOI: doi.org/10.1016/j.wear.2021.204104; ISSN # 0043-1648).
  44. Tania Roy, Avinash Kumar Agarwal, Yogesh Chandra Sharma*. “A cleaner route of biodiesel production from waste frying oil using novel potassium tin oxide catalyst: A smart liquid-waste management”, Waste Management, Volume 135, November 2021, Pages 243-255. (Impact Factor2022: 8.816; DOI: 10.1016/j.wasman.2021.08.046; ISSN # 0956-053X).
  45. Rajesh Kumar Prasad, Avinash Kumar Agarwal*, “Effect of Hydrogen Enrichment of Compressed Natural Gas on Combustible Limit and Flame Kernel Evolution in a Constant Volume Combustion Chamber using Laser Ignition,” FUEL Volume 302, October 2021, 121112. (Impact Factor2022: 8.035; DOI: doi.org/10.1016/j.fuel.2021.121112; ISSN # 0016-2361).
  46. Rohini Khobragade, Govindachetty Saravanan, Hisahiro Einaga, Hideo Nagashima, Pravesh Shukla, Tarun Gupta, Avinash Kumar Agarwal, Nitin Labhasetwar*, “Diesel Fuel Particulate Emission Control using Low-cost Catalytic Materials” FUEL Volume 302, October 2021, 121157 (Impact Factor2022: 8.035; DOI: doi.org/10.1016/j.fuel.2021.121157; ISSN # 0016-2361).
  47. Akhilendra P. Singh, Vikram Kumar, Avinash Kumar Agarwal*, “Evaluation of Reactivity Controlled Compression Ignition Mode Combustion Engine Using Mineral Diesel/ Gasoline Fuel Pair” FUEL Volume 301, October 2021, 120986. (Impact Factor2022: 8.035; DOI: doi.org/10.1016/j.fuel.2021.120986; ISSN # 0016-2361).
  48. Jakub Cedík*, Martin Pexa, Michal Holúbek, Jaroslav Mrázek, Hardikk Valera, Avinash Kumar Agarwal “Operational parameters of diesel engine running on diesel fuel–rapeseed oil–methanol–iso-butanol fuel blends”, Energies, 14(19), October 2021, pp 6173. (Impact Factor2022: 3.252; DOI: doi.org/10.3390/en14196173; ISSN # 1996-1073).Link
  49. Avinash Kumar Agarwal*, Akhilendra Pratap Singh, Sukrut S. Thipse, Gautam Goswami, “A Review on Energy, Environment, and Emissions Issues in Indian Road Transport Sector,” Transactions of the Indian National Academy of Engineering, Volume 6(3), pp. 595–611, September 2021. (Impact Factor2022; DOI: doi.org/ 10.1007/s41403-021-00232-z; ISSN # 2662-5415).
  50. Avinash Kumar Agarwal*, Akhilendra Pratap Singh, Vikram Kumar, “Particulate Characteristics of Low-Temperature Combustion (PCCI and RCCI) Strategies in Single Cylinder Research Engine for Developing Sustainable and Cleaner Transportation Solution”, Environmental Pollution, Volume 284, September 2021, 117375. (Impact Factor2022: 9.988; DOI: doi.org/10.1016/j.envpol.2021.117375; ISSN # 0269-7491).
  51. 251. Ashutosh Jena, Harsimran Singh, Avinash Kumar Agarwal*, “Effect of Swirl Ratio on Charge Convection, Temperature Stratification, and Combustion in Gasoline Compression Ignition Engine” Physics of Fluids, 33, pp. 085113, August 2021. (Impact Factor2022: 4.980; DOI: 10.1063/5.0059579; ISSN # 1070-6631).
  52. Chetankumar Patel, Joonsik Hwang, Choongsik Bae, Avinash Kumar Agarwal*, “Regulated, Unregulated, and Particulate Emissions from Biodiesel Blend Fueled Transportation Engine, ASME Journal of Energy Resources Technology, Volume 143(8), August 2021, pp 084501-1-6. (Impact Factor2022: 3.070; DOI: 10.1115/1.4048939; ISSN # 0195-0738).
  53. Akhilendra Pratap Singh, Nikhil Sharma, Vikram Kumar, Avinash Kumar Agarwal*, “Experimental Investigations of Mineral Diesel/ Methanol-Fueled Reactivity Controlled Compression Ignition Engine Operated at Variable Engine Loads and Premixed Ratios" International Journal of Engine Research, July 2021, 22(7): pp 2375-2389. (Impact Factor2022: 3.874; DOI: 10.1177/1468087420923451 ; ISSN # 1468 0874).
  54. Dhananjay Kumar, Hardikk Valera, Anirudh Gautam, Avinash Kumar Agarwal*, “Simulations of methanol fueled locomotive engine using high pressure co-axial direct injection system,” FUEL, Volume 295, July 2021, 120231(1-14), (Impact Factor2022: 8.035; DOI: 10.1016/j.fuel.2021.120231; ISSN # 0016-2361).
  55. Avinash Kumar Agarwal*, Akhilendra Pratap Singh, Vikram Kumar, Nikhil Sharma, Dev Prakash Satsangi, “Alcohol-Fueled Reactivity-Controlled Compression Ignition Combustion for Partial Replacement of Mineral Diesel in Internal Combustion Engines”, SAE International Journal of Engines, 14(6): June 2021. (Impact Factor2019: 0.51; DOI: 10.4271/03-14-06-0047; ISSN # 1946-3936).
  56. Akhilendra P. Singh, Vikram Kumar, Avinash Kumar Agarwal*, “Reactivity-Controlled Compression Ignition Combustion at Different Intake Charge Temperatures and Exhaust Gas Recirculation,” SAE International Journal of Engines 14(6): June 2021. (Impact Factor2019: 0.51; DOI: 10.4271/03-14-06-0046; ISSN # 1946-3936).Link
  57. Hardikk Valera, Dhananjay Kumar, and Avinash Kumar Agarwal*, “Feasibility Assessment of Methanol Fueling in Two-Wheeler Engine Using 1-D Simulations,” SAE Technical Paper 2021-01-0382, 2021, DOI: 10.4271/2021-01-0382.
  58. Dhananjay Kumar, Hardikk Valera, Avinash Kumar Agarwal*, “Numerical Predictions of In-Cylinder Phenomenon in Methanol Fueled Locomotive Engine Using High-Pressure Direct Injection Technique,” SAE Technical Paper 2021-01-0492, 2021, DOI: 10.4271/2021-01-0492.
  59. Ankur Kalwar, Sam Joe Chintagunti, Avinash Kumar Agarwal*, “Gasohol Sprays Simulations of a Multi-Hole GDI Injector in Engine-Like Conditions,” SAE Technical Paper 2021-01-0549, 2021, DOI: 10.4271/2021-01-0549.
  60. Ashutosh Jena, Harsimran Singh, Avinash Kumar Agarwal*, “Effect of Swirl Ratio and Piston Geometry on the Late-Compression Mean Air-Flow in a Diesel Engine,” SAE Technical Paper 2021-01-0647, 2021, DOI: 10.4271/2021-01-0647.
  61. Rajesh Kumar Prasad, Avinash Kumar Agarwal*, “Experimental Evaluation of Laser Ignited Hydrogen Enriched Compressed Natural Gas-Fueled Supercharged Engine” FUEL Volume 289, 1 April 2021, pp 119788. (Impact Factor2022: 8.035; DOI: 10.1016/j.fuel.2020.119788; ISSN # 0016-2361).
  62. Avinash Kumar Agarwal*, Deepak Agarwal, “Field-Testing of Biodiesel (B100) and Diesel-Fueled Vehicles: Part 1- No-Load and Highway Driving Emissions, and Acceleration Characteristics,” ASME Journal of Energy Resources Technology, April 2021, 143(4): 042307. (Impact Factor2022: 3.070; DOI: 10.1115/1.4048307; ISSN # 0195-0738).
  63. Avinash Kumar Agarwal*, Deepak Agarwal, “Field-Testing of Biodiesel (B100) and Diesel-Fueled Vehicles: Part 2—Lubricating Oil Condition Monitoring,” ASME Journal of Energy Resources Technology, April 2021, 143(4): 042308. (Impact Factor2022: 3.070; DOI: 10.1115/1.4048308; ISSN # 0195-0738).
  64. Avinash Kumar Agarwal*, Deepak Agarwal, “Field-Testing of Biodiesel (B100) and Diesel-Fueled Vehicles: Part 3—Wear Assessment of Liner and Piston Rings, Engine Deposits, and Operational Issues,” ASME Journal of Energy Resources Technology, April 2021, 143(4): 042310. (Impact Factor2022: 3.070; DOI: 10.1115/1.4048309; ISSN # 0195-0738).
  65. Avinash Kumar Agarwal*, Deepak Agarwal, “Field-Testing of Biodiesel (B100) and Diesel-Fueled Vehicles: Part 4—Piston Rating, and Fuel Injection Equipment Issues,” ASME Journal of Energy Resources Technology, April 2021, 143(4): 042307. (Impact Factor2022: 3.070; DOI: 10.1115/1.4048310; ISSN # 0195-0738).
  66. Nikhil Sharma, Avinash Kumar Agarwal*, “Macroscopic spray characteristics of a gasohol fueled GDI injector and impact on engine combustion and particulate morphology,” FUEL, Volume 295, March 2021, 120461. (Impact Factor2022: 8.035; DOI: 10.1016/j.fuel.2021.120461; ISSN # 0016-2361).
  67. Avinash Kumar Agarwal*, Nirendra Nath Mustafi, “Real-world automotive emissions: Monitoring methodologies, and control measures,” Renewable and Sustainable Energy Reviews, Volume 137, March 2021, pp 110624. (Impact Factor2022: 16.799; DOI: 10.1016/j.rser.2020.110624; ISSN # 1364-0321).
  68. Rajesh Kumar Prasad, Avinash Kumar Agarwal*, “Development and Comparative Experimental Investigations of Laser Plasma and Spark Plasma Ignited Hydrogen Enriched Compressed Natural Gas Fuelled Engine,” Energy, Volume 216, 1 February 2021, 119282. (Impact Factor2022: 8.857; DOI: 10.1016/j.energy.2020.119282; ISSN # 0360-5442).
  69. Akhilendra Pratap Singh, Avinash Kumar Agarwal*, “Performance and emission characteristics of conventional diesel combustion/partially premixed charge compression ignition combustion mode switching of biodiesel-fueled engine,” International Journal of Engine Research, February 2021, Vol. 22(2) pp. 540–553 (Impact Factor2022: 3.874; DOI: 10.1177/1468087419860311; ISSN # 1468 0874).
  70. 2020

  71. Avinash Kumar Agarwal*, Deepak Agarwal, “Field-Testing of Biodiesel (B100) and Diesel-Fueled Vehicles: Part 1—No Load and Highway Driving Emissions, and Acceleration Characteristics”, ASME Journal of Energy Resources Technology, April 2020, 143(4): 042307. (Impact Factor2019: 3.183; DOI: https://doi.org/10.1115/1.4048307; ISSN # 0195-0738). (Website/ Pdf)
  72. Avinash Kumar Agarwal*, Deepak Agarwal, “Field-Testing of Biodiesel (B100) and Diesel-Fueled Vehicles: Part 2—Lubricating Oil Condition Monitoring”, ASME Journal of Energy Resources Technology, April 2020, 143(4): 042308. (Impact Factor2019: 3.183; DOI: https://doi.org/10.1115/1.4048308; ISSN # 0195-0738). (Website/ Pdf)
  73. Avinash Kumar Agarwal*, Deepak Agarwal, “Field-Testing of Biodiesel (B100) and Diesel-Fueled Vehicles: Part 3—Wear Assessment of Liner and Piston Rings, Engine Deposits, and Operational Issues”, ASME Journal of Energy Resources Technology, April 2020, 143(4): 042310. (Impact Factor2019: 3.183; DOI: https://doi.org/10.1115/1.4048309; ISSN # 0195-0738). (Website/ Pdf)
  74. Avinash Kumar Agarwal*, Deepak Agarwal, “Field-Testing of Biodiesel (B100) and Diesel-Fueled Vehicles: Part 4—Piston Rating, and Fuel Injection Equipment Issues”, ASME Journal of Energy Resources Technology, April 2020, 143(4): 042307. (Impact Factor2019: 3.183; DOI: https://doi.org/10.1115/1.4048310; ISSN # 0195-0738). (Website/ Pdf)
  75. Akhilendra P. Singh, Vikram Kumar, Avinash Kumar Agarwal, “Evaluation of Comparative Engine Combustion, Performance and Emission Characteristics of Low Temperature Combustion (PCCI and RCCI) Modes”. Applied Energy Volume 278, November 2020, pp 115644-1-11. (Impact Factor2019: 8.848; DOI: 10.1016/j.apenergy.2020.115644; ISSN # 0306-2619).(Website/ Pdf)
  76. Sarwar Nizam*, Indra S. Sen, Velu Vinoj, Valier Galy, David Selby, Mohammad F. Azam, Satyendra K. Pandey, Robert A. Creaser, Avinash K. Agarwal, Akhilendra P. Singh, and Michael Bizimis, “Biomass-Derived Provenance Dominates Glacial Surface Organic Carbon in the Western Himalaya”, Environmental Science and Technology 54 (14), pp 8612–8621, 2020. (Impact Factor2019: 7.864; DOI: 10.1021/acs.est.0c02710; ISSN # 0013-936X). [Cover art Article] (Website/ Pdf)
  77. Chetankumar Patel, Joonsik Hwang, Choongsik Bae, Rashmi A. Agarwal, and Avinash Kumar Agarwal*, “Microscopic Spray Characteristics of Biodiesels Derived from Karanja, Jatropha and Waste Cooking Oils”, ASME Journal of Energy Resources Technology, December 2020, 142(12): 124501-1-5. (Impact Factor2019: 3.183; DOI: 10.1115/1.4047408; ISSN # 0195-0738). (Website/ Pdf)
  78. Akhilendra P. Singh, Nikhil Sharma, Dev Prakash Satsangi, Avinash Kumar Agarwal*, “Effect of Fuel Injection Pressure and Premixed Ratio on Mineral Diesel-Methanol Fueled Reactivity Controlled Compression Ignition Mode Combustion Engine”. ASME Journal of Energy Resources Technology December 2020, 142(12): 122301. (Impact Factor2019: 3.183; DOI: 10.1115/1.4047320; ISSN # 0195-0738). (Website/ Pdf)
  79. Akhilendra Pratap Singh, Avinash Kumar Agarwal*, “Split Injection Strategies for Biodiesel-Fueled Premixed Charge Compression Ignition Combustion Engine-Part I: Combustion, Performance and Emission Studies”, ASME Journal of Energy Resources Technology, December 2020, 142(12): 122303. (Impact Factor2019: 3.183; DOI: 10.1115/1.4047315; ISSN # 0195-0738). (Website/ Pdf)
  80. Akhilendra Pratap Singh, Avinash Kumar Agarwal*, “Split Injection Strategies for Biodiesel-Fueled Premixed Charge Compression Ignition Combustion Engine-Part II: Particulate Studies”, ASME Journal of Energy Resources Technology, December 2020, 142(12): 122304. (Impact Factor2019: 3.183; DOI: 10.1115/1.4047316; ISSN # 0195-0738). (Website/ Pdf)
  81. Vikram Kumar, Akhilendra Pratap Singh, Avinash Kumar Agarwal*, “Gaseous Emissions (Regulated and Unregulated) and Particulate Characteristics of a Medium-Duty CRDI Transportation Diesel Engine Fueled with Diesel-Alcohol Blends”, FUEL Vol. 278, October 2020, pp 118269-1-12. (Impact Factor2019: 5.578; DOI: 10.1016/j.fuel.2020.118269; ISSN # 0016-2361). (Website/ Pdf)
  82. Nikhil Sharma, Avinash Kumar Agarwal*, “Particulate Morphology Characterization of Butanol-Gasoline Blend Fuelled Gasoline Direct Injection Engine”, ASME Journal of Energy Resources Technology, October 2020, 142(10): 102303. (Impact Factor2019: 3.183; DOI: 10.1115/1.4047019; ISSN # 0195-0738). (Website/ Pdf)
  83. Rajesh Kumar Prasad, Nirendra Mustafi, Avinash Kumar Agarwal*, “Effect of Spark Timing on Laser Ignition and Spark Ignition Modes in a Hydrogen Enriched Compressed Natural Gas Fuelled Engine”, FUEL, September 2020, Vol. 276, pp 118071-1-9. (Impact Factor2019: 5.578; DOI: 10.1016/j.fuel.2020.118071; ISSN # 0016-2361). (Website/ Pdf)
  84. Ankur Kalwar, Akhilendra Singh, Avinash Kumar Agarwal*, “Utilization of Primary Alcohols in Dual-Fuel Injection Mode in a Gasoline Direct Injection Engine”, FUEL, September 2020, Vol. 276, pp 118068-1-9. (Impact Factor2019: 5.578; DOI: 10.1016/j.fuel.2020.118068; ISSN # 0016-2361). (Website/ Pdf)
  85. Akhilendra P. Singh, Avinash Kumar Agarwal*, “Biodiesel Spray Characteristics and Their Effect on Engine Combustion and Particulate Emissions”, ASME Journal of Energy Resources Technology, August 2020, Vol. 142(8): pp. 082303. (Impact Factor2019: 3.183; DOI: 10.1115/1.4045923; ISSN # 0195-0738). (Website/ Pdf)
  86. Akhilendra Pratap Singh, Nikhil Sharma, Vikram Kumar, Dev Prakash Satsangi, Avinash Kumar Agarwal*, “Fuel Injection Strategy for Utilization of Mineral Diesel-Methanol Blend in a Common Rail Direct Injection Engine”, ASME Journal of Energy Resources Technology, August 2020, Vol. 142(8): pp. 082305. (Impact Factor2019: 3.183; DOI: 10.1115/1.4046225; ISSN # 0195-0738). (Website/ Pdf)
  87. Avinash Kumar Agarwal*, Akhilendra Pratap Singh, Tarun Gupta, Rashmi A. Agarwal, Nikhil Sharma, Swaroop Pandey, Bushra Ateeq, “Toxicity of Exhaust Particulates and Gaseous Emissions from Gasohol (Ethanol Blended Gasoline)-Fuelled Spark Ignition Engines”, Environmental Science: Processes & Impacts July 2020, Vol. 22, pp 1540-1553. (Impact Factor2018: 3.238; DOI: 10.1039/D0EM00082E; ISSN # 2050-7895). (Website/ Pdf)
  88. Akhilendra Pratap Singh, Dhananjay Kumar, Avinash Kumar Agarwal*, “Particulate Characteristics of Laser Ignited Hydrogen Enriched Compressed Natural Gas Engine”, International Journal of Hydrogen Energy, July 2020, 45(35) pp 18021-18031. (Impact Factor2019: 4.939; DOI: 10.1016/j.ijhydene.2020.05.005; ISSN # 0360-3199). (Website/ Pdf)
  89. Tushar Agarwal, Akhilendra Pratap Singh, Avinash Kumar Agarwal*, “Development of Port Fuel Injected Methanol (M85)-Fuelled Two-Wheeler for Sustainable Transport” Available online in Journal of Traffic and Transportation Engineering, June 2020, 7(3), 298-311. (Impact Factor2018: 2.18; Cite Score: 2.43; DOI: 10.1016/j.jtte.2020.04.003; ISSN # 2095-7564). (Website/ Pdf)
  90. Deepak Maurya, Mahendra Kumar Gohil, Utkarsha Sonawane, Dhananjay Kumar, Anuj Awasthi, Aditya Kumar Prajapati, Khushbu Kishnani, Jaya Srivastava, Akshay Age, Ravichand Pol, Santanu Misra, D. R. Sarin3 Pawan K. Dube, Vivek Dwivedi, Alok Thakur, Ritesh Srivastava, Vishal Shukla, Ravi Ranjan, Ramakant Tiwari, Anand S Patil, Pooja Agrawal, Ashesha Sinha, Mrinal Dubey, Reema Mittal, Avinash K Agarwal*, “Development of Autonomous Advanced Disinfection Tunnel to Tackle External Surface Disinfection of COVID-19 Virus in Public Places”, Transactions of the Indian National Academy of Engineering, May 2020, Vol. 5(2), pp 281-287. (Impact Factor2019; DOI: 10.1007/s41403-020-00141-7; ISSN # 2662-5415). (Website/ Pdf)
  91. Dhananjay Kumar, Utkarsha Sonawane, Mahendra Kumar Gohil, Ravichand Pol, Anand S Patil, Reema Mittal, Avinash K Agarwal*, “Design and Development of a Portable Disinfectant Device”, Transactions of the Indian National Academy of Engineering, May 2020, Vol. 5(2), pp 299-303. (Impact Factor2019; DOI: 10.1007/s41403-020-00138-2; ISSN # 2662-5415). (Website/ Pdf)
  92. Mayank Patel, Shubham Khatri, Jyoti Ratna Shree, Anand S Patil, Pooja Agrawal, Ashesha Sinha, Mrinal Dubey, Reema Mittal, Avinash K Agarwal*, “Conceptual Design of a Body Bag for Preventing Infections and Safe Disposal of Deceased from COVID-19 Virus”, Transactions of the Indian National Academy of Engineering, May 2020, Vol. 5(2), pp 429-435. (Impact Factor2019; DOI: 10.1007/s41403-020-00135-5; ISSN # 2662-5415). (Website/ Pdf)
  93. Utkarsha Sonwane, Ankur Kalwar, Avinash Kumar Agarwal*, “Microscopic and Macroscopic Spray Characteristics of Gasohols Using a Port Fuel Injection System”, SAE Technical Paper No. 2020-01-0324. (Impact Factor2019: 0.51; DOI: 10.4271/2020-01-0324; ISSN: 0148-7191, e-ISSN: 2688-3627). (Website/ Pdf)
  94. Nikhil Sharma, Avinash Kumar Agarwal*, “Effect of Fuel Injection Pressure and Engine Speed on Performance, Emissions, Combustion, Particulate and Morphological Investigation of Gasohols Fuelled Gasoline Direct Injection Engine” ASME Journal of Energy Resources Technology, February 2020, Vol. 142(4): pp. 042201. (Impact Factor2019: 3.183; DOI: 10.1115/1.4044763; ISSN # 0195-0738). (Website/ Pdf)
  95. Nikhil Sharma, William Bachalo, Avinash Kumar Agarwal*, “Spray Droplet Size Distribution and Droplet Velocity Measurements in a Firing Optical Engine”, Physics of Fluids, 32, pp. 023304, 2020. (Impact Factor2019: 3.514; DOI: 10.1063/1.5126498; ISSN # 1070-6631). (Website/ Pdf)
  96. Avinash Kumar Agarwal*, Akhilendra Pratap Singh, Sukrut S. Thipse, and Mukti Prasad, “Intermodal and Intelligent Transportation Systems for Developed India”, Journal of Energy and Environmental Sustainability, January 2020, 9: 1-6. (ISSN # 2455-2259). (Website/ Pdf)
  97. R D Reitz, H Ogawa, R Payri, T Fansler, S Kokjohn, Y Moriyoshi, AK Agarwal, D Arcoumanis, D Assanis, C Bae, K Boulouchos, M Canakci, S Curran, I Denbratt, M Gavaises, M Guenthner, C Hasse, Z Huang, T Ishiyama, B Johansson, TV Johnson, G Kalghatgi, M Koike, SC Kong, A Leipertz, P Miles, R Novella, A Onorati, M Richter, S Shuai, D Siebers, W Su, M Trujillo, N Uchida, B M Vaglieco, RM Wagner, H Zhao, “IJER editorial: The future of the internal combustion engine”, International Journal of Engine Research 21(1), pp. 3-10, 2020. (Impact Factor2019: 2.382; DOI: 10.1177/1468087419877990; ISSN # 1468 0874). (Website/ Pdf)
  98. 2019

  99. Rohini Khobragade*, Sunit Kumar Singh, Pravesh Chandra Shukla, Tarun Gupta, Ahmed S. Al-Fatesh, Avinash Kumar Agarwal, Nitin K. Labhasetwar*, “Chemical composition of diesel particulate matter and its control”, Catalysis Reviews: Science and Engineering. Vol. 61(4), pp. 447–515, 2019. (Impact Factor2019: 11.389; DOI: 10.1080/01614940.2019.1617607; ISSN # 0161-4940). (Website/ Pdf)
  100. Avinash Kumar Agarwal*, Nikhil Sharma, Akhilendra Pratap Singh, Vikram Kumar, Dev Prakash Satsangi, Chetankumar Patel, “Adaptation of Methanol–Dodecanol–Diesel Blend in Diesel Genset Engine”, ASME Journal of Energy Resources Technology, October 2019, Vol. 141(10), pp. 102203-102203-9. (Impact Factor2019: 3.183; DOI: 10.1115/1.4043390; ISSN # 0195-0738). (Website/ Pdf)
  101. Felix Sebastian Hirner, Joonsik Hwang, Choongsik Bae*, Chetankumar Patel, Tarun Gupta, Avinash Kumar Agarwal, “Performance and emission evaluation of a small-bore biodiesel compression-ignition engine”, Energy, Vol. 183, pp 971-982, September 2019. (Impact Factor2019: 6.082; DOI: https://doi.org/10.1016/j.energy.2019.07.015; ISSN # 0360-5442). (Website/ Pdf)
  102. Joonsik Hwang, Felix Sebastian Hirner, Choongsik Bae*, Chetankumar Patel, Tarun Gupta, Avinash Kumar Agarwal, “HRTEM evaluation of primary soot particles originated in a small-bore biofuel compression-ignition engine”, Applied Thermal Engineering, Vol. 159, pp 113899, August 2019. (Impact Factor2019: 4.725; DOI: https://doi.org/10.1016/j.applthermaleng.2019.113899; ISSN # 1359-4311). (Website/ Pdf)
  103. Nikhil Sharma, Chetankumar Patel, Nachiketa Tiwari, Avinash Kumar Agarwal*, “Experimental investigations of noise and vibration characteristics of gasoline-methanol blend fuelled gasoline direct injection engine and their relationship with combustion characteristics”, Applied Thermal Engineering, Vol. 158, pp113754, July 2019. (Impact Factor2019: 4.725; DOI: https://doi.org/10.1016/j.applthermaleng.2019.113754; ISSN # 1359-4311). (Website/ Pdf)
  104. Avinash Kumar Agarwal*, Yeshudas Jiotode, Nikhil Sharma, “Endoscopic visualization of engine combustion chamber using diesoline, diesosene and mineral diesel for comparative spatial soot and temperature distributions” FUEL, Volume 241, April 2019, pp. 901-913. (Impact Factor2019: 5.578; DOI: 10.1016/j.fuel.2018.11.068; ISSN # 0016-2361). (Website/ Pdf)
  105. Vikram Kumar, Sujeet Kumar Sinha* and Avinash Kumar Agarwal, “Wear evaluation of engine piston rings coated with dual layer hard and soft coatings”, ASME Journal of Tribology, Volume 141(3), 031301-10, March 2019. (Impact Factor2019: 1.892; DOI: 10.1115/1.4041762; ISSN # 0022-2305). (Website/ Pdf)
  106. Nikhil Sharma, Rashmi A Agarwal, Avinash Kumar Agarwal*, “Particulate Bound Trace Metals and Soot Morphology of Gasohol Fueled Gasoline Direct Injection Engine” ASME Journal of Energy Resources Technology, February 2019, Vol. 141(2), pp. 022201-022201-14. (Impact Factor2019: 3.183; DOI: 10.1115/1.4040580; ISSN # 0195-0738). (Website/ Pdf)
  107. Chetankumar Patel, Nachiketa Tiwari, Avinash Kumar Agarwal*, “Experimental investigations of Soyabean and Rapeseed SVO and biodiesels on engine noise, vibrations, and engine characteristics”, FUEL, Volume 238, February 2019, pp. 86-97. (Impact Factor2019: 5.578; DOI: 10.1016/j.fuel.2018.10.068; ISSN # 0016-2361). (Website/ Pdf)
  108. Chetankumar Patel, Krishn Chandra, Joonsik Hwang, Rashmi A Agarwal, Neeraj Gupta, C S Bae, Tarun Gupta, Avinash Kumar Agarwal*, “Comparative compression ignition engine performance, combustion, and emission characteristics, and trace metals in particulates from Waste cooking oil, Jatropha and Karanja oil derived biodiesels’, FUEL, Volume 236, January 2019, pp. 1366-1376. (Impact Factor2019: 5.578; DOI: 10.1016/j.fuel.2018.08.137; ISSN # 0016-2361). (Website/ Pdf)
  109. Chetankumar Patel, Joonsik Hwang, Krishn Chandra, Rashmi A Agarwal, C S Bae, Tarun Gupta, Avinash Kumar Agarwal*, “In-cylinder spray and combustion investigations in a heavy-duty optical engine fueled with waste cooking oil, Jatropha, and Karanja biodiesels”, ASME Journal of Energy Resources Technology, Vol. 141(1), pp 012201-12, 2019 (Impact Factor2019: 3.183; DOI: 10.1115/1.4040579; ISSN # 0195-0738). (Website/ Pdf)
  110. Nikhil Sharma, Avinash Kumar Agarwal*, “Particle Characterization of Soot Aggregates Emitted by Gasohol Fueled Direct Injection Engine” Energy and Fuels, 2019, Vol. 33(1), pp 420–428. (Impact Factor2019: 3.421; DOI: 10.1021/acs.energyfuels.8b01380; ISSN # 0887-0624). (Website/ Pdf)
  111. Felix Sebastian Hirner, Joonsik Hwang, Choongsik Bae*, Chetankumar Patel, Tarun Gupta, Avinash Kumar Agarwal, “Nanostructure characterization of soot particles from biodiesel and diesel spray flame in a constant volume combustion chamber”, FUEL, Volume 235, Pages 130-149, January 2019. (Impact Factor2019: 5.578; DOI: 10.1016/j.fuel.2018.07.092; ISSN # 0016-2361). (Website/ Pdf)
  112. 2018

  113. Avinash Kumar Agarwal*, Sungwook Park, Atul Dhar, Chang Sik Lee, Su Han Park, Tarun Gupta, Neeraj K. Gupta, “Review of Experimental and Computational Studies on Spray, Combustion, Performance, and Emission Characteristics of Biodiesel Fueled Engines”, ASME Journal of Energy Resources Technology, December 2018; Vol. 140(12), pp 120801-120801-30. (Impact Factor2016: 3.183; DOI: 10.1115/1.4040584; ISSN # 0195-0738). (Website/ Pdf)
  114. Avinash Kumar Agarwal*, Akhilendra P. Singh, Tarun Gupta, Rashmi A. Agarwal, Nikhil Sharma, Prashant Rajput, Swaroop K. Pandey, Bushra Ateeq, “Mutagenicity and Cytotoxicity of Particulate Matter Emitted from Biodiesel-Fueled Engines” Environmental Science and Technology, 2018, 52 (24), pp 14496–14507. (Impact Factor2019: 7.864; DOI: 10.1021/acs.est.8b03345; ISSN # 0013-936X). (Website/ Pdf)
  115. Avinash Kumar Agarwal*, Akhilendra Pratap Singh, Rakesh Kumar Maurya, Pravesh Chandra Shukla, Atul Dhar, Dhananjay Kumar Srivastava, “Combustion characteristics of a common rail direct injection engine using different fuel injection strategies”, International Journal of Thermal Sciences, Volume 134, December 2018, Pages 475-484. (Impact Factor2019: 3.476; DOI: 10.1016/j.ijthermalsci.2018.07.001; ISSN # 1290-0729). (Website/ Pdf)
  116. SMV Sagar, Avinash Kumar Agarwal*, “Knocking behavior and emission characteristics of a port fuel injected hydrogen enriched compressed natural gas fueled spark ignition engine”, Applied Thermal Engineering, Volume 141, Pages 42-50, August 2018. (Impact Factor2019: 4.725; DOI:10.1016/j.applthermaleng.2018.05.102; ISSN # 1359-4311). (Website/ Pdf)
  117. Akhilendra P. Singh, Neeraj Gupta, Avinash Kumar Agarwal*, “Experimental evaluation of sensitivity of low-temperature combustion to intake charge temperature and fuel properties”, International Journal of Engine Research. July 2018, Vol. 19(7), pp 732-757. (Impact Factor2019: 2.382; DOI: 10.1177/1468087417730215; ISSN # 1468 0874). (Website/ Pdf)
  118. Akhilendra Pratap Singh, Avinash Kumar Agarwal*, “Low Temperature Combustion Engines and Mode Switching Strategies – A Review”, Journal of Energy, Environment and Sustainability, Vol. 6, pp 42-47, July 2018. (ISSN # 2455-2259). (Website/ Pdf)
  119. Vikram Kumar, Sujeet Kumar Sinha*, Avinash Kumar Agarwal, “Tribological Characterization of Epoxy-Graphene-Liquid filler Composite Coatings on steel under Base Oil External Lubrication”, Tribology - Materials, Surfaces & Interfaces, Vol. 12(3), pp 144-156, May 2018. (DOI: 10.1080/17515831.2018.1482719; ISSN # 1751-5831). (Website/ Pdf)
  120. Vikram Kumar, Sujeet Kumar Sinha, Avinash Kumar Agarwal, “Tribological Studies of Dual-Coating (Intermediate Hard with top Epoxy-Graphene-base oil Composite Layers) on Tool Steel in Dry and Lubricated Conditions” Tribology International, Vol. 127, pp 10-23, 2018. (Impact Factor2016: 4.271; DOI: 10.1016/j.triboint.2018.05.011; ISSN # 0301-679X).(Website/ Pdf)
  121. Akhilendra P. Singh, Avinash Kumar Agarwal*, “Evaluation of Fuel Injection Strategies for Biodiesel Fueled CRDI Engine Development and Particulate Studies”, ASME Journal of Energy Resources Technology, Vol. 140(10), October 2018, Pages 102201-102201-17. (Impact Factor2019: 3.183; DOI: 10.1115/1.4039745; ISSN # 0195-0738). (Website/ Pdf)
  122. Avinash K Agarwal*, Bushra Ateeq, Tarun Gupta, Akhilendra P. Singh, Swaroop K Pandey, Nikhil Sharma, Rashmi A Agarwal, Neeraj K. Gupta, Hemant Sharma, Ayush Jain, Pravesh C Shukla, “Toxicity and mutagenicity of exhaust from compressed natural gas: Could this be a clean solution for megacities with mixed-traffic conditions?”, Environmental Pollution, Volume 239, August 2018, Pages 499-511. (Impact Factor2019: 6.792; DOI: 10.1016/j.envpol.2018.04.028; ISSN # 0269-7491). (Website/ Pdf)
  123. Sarveshwar M. Reddy, Nikhil Sharma, Neeraj Gupta, Avinash Kumar Agarwal*, “Effect of Non-Edible Oil and Its Biodiesel on Wear of Fuel Injection Equipment Components of a Genset Engine”, FUEL, Volume 222, June 2018, Pages 841-851. (Impact Factor2019: 5.578; DOI: # 10.1016/j.fuel.2018.02.132; ISSN # 0016-2361). (Website/ Pdf)
  124. Akhilendra P. Singh, Nikhil Bajpai, Avinash Kumar Agarwal*, “Combustion Mode Switching Characteristics of a Medium-Duty Engine Operated in Compression Ignition/PCCI Combustion Modes”, ASME Journal of Energy Resources Technology, Vol. 140(9), September 2018; Pages 092201-092201-11. (Impact Factor2019: 3.183; DOI: 10.1115/1.4039741; ISSN # 0195-0738). (Website/ Pdf)
  125. Dhananjay Kumar Srivastava, Avinash Kumar Agarwal*, “Combustion Characteristics of a Variable Compression Ratio Laser-Plasma Ignited Compressed Natural Gas Engine”, FUEL, Volume 214, 15 February 2018, Pages 322-329. (Impact Factor2019: 5.578; DOI: 10.1016/j.fuel.2017.10.012; ISSN # 0016-2361). (Website/ Pdf)
  126. Pravesh Chandra Shukla, Tarun Gupta, Avinash Kumar Agarwal*, “Performance Evaluation of a Biodiesel Fuelled Transportation Engine Retrofitted With a Non-Noble Metal Catalysed Diesel Oxidation Catalyst for Controlling Unregulated Emissions”, Journal of Hazardous Materials, Volume 344, 15 February 2018, Pages 615-625. (Impact Factor2019: 9.038; DOI: 10.1016/j.jhazmat.2017.10.052; ISSN # 0304-3894). (Website/ Pdf)
  127. Avinash Kumar Agarwal*, Suresh Gadekar; Akhilendra Pratap Singh, “In-Cylinder Flow Evolution Using Tomographic Particle Imaging Velocimetry in an Internal Combustion Engine”, ASME Journal of Energy Resources Technology, 140(1), pp. 012207-012207 1-10, January 2018. (Impact Factor2019: 3.183; DOI: 10.1115/1.4037686; ISSN # 0195-0738). (Website/ Pdf)
  128. 2017

  129. Joonsik Hwang, Choongsik Bae*, Chetankumar Patel, Rashmi A. Agarwal, Tarun Gupta, and Avinash Kumar Agarwal, “Investigations on Air-Fuel Mixing and Flame Characteristics of Biodiesel Fuels for Diesel Engine Application”, Applied Energy, Volume 206, 15 November 2017, Pages 1203-1213. (Impact Factor2019: 8.848; DOI: 10.1016/j.apenergy.2017.10.027; ISSN # 0306-2619). (Website/ Pdf)
  130. Avinash Kumar Agarwal*, Suresh Gadekar, Akhilendra Pratap Singh, “In-Cylinder Air Flow Characteristics of different Intake Port Geometries using Tomographic PIV”, Physics of Fluids, 29(9), pp. 095104(1-16), 2017. (Impact Factor2016: 3.514; DOI: 10.1063/1.5000725; ISSN # 1070-6631). (Website/ Pdf)
  131. Akhilendra P. Singh, Ayush Jain, Avinash K. Agarwal*, “Fuel-Injection Strategy for PCCI Engine Fueled by Mineral Diesel and Biodiesel Blends”, Energy and Fuels, 31 (8), pp 8594–8607, 2017. (Impact Factor2019: 3.421; DOI: 10.1021/acs.energyfuels.6b03393; ISSN # 0887-0624). (Website/ Pdf)
  132. Joonsik Hwang and Choongsik Bae, Chetankumar Patel, Avinash Kumar Agarwal, and Tarun Gupta, “Near Nozzle Flow and Atomization Characteristics of Biodiesel Fuels”, SAE 2017-01-2327, 2017. (Impact Factor2019: 0.51; DOI: 10.4271/2017-01-2327; ISSN 0148-7191). (Website/ Pdf)
  133. Pravesh Chandra Shukla, Tarun Gupta, Neeraj Gupta, Avinash Kumar Agarwal*, “A Qualitative Correlation Between Engine Exhaust Particulate Number and Mass Emissions”, FUEL, 202, pp 241-245, August 2017. (Impact Factor2019: 5.578; DOI: 10.1016/j.fuel.2017.04.016; ISSN # 0016-2361).(Website/ Pdf)
  134. Akhilendra Pratap Singh, Anuj Pal, Neeraj Kumar Gupta, Avinash Kumar Agarwal*, “Particulate Emissions from Laser Ignited and Spark Ignited Hydrogen Fueled Engines” International Journal of Hydrogen Energy, 42(24), pp 15956-15965, June 2017. (Impact Factor2019: 4.939; DOI: 10.1016/j.ijhydene.2017.04.031; ISSN # 0360-3199). (Website/ Pdf)
  135. Avinash Kumar Agarwal*, Akhilendra Pratap Singh, Anuj Pal, “Effect of Laser Parameters and Compression Ratio on Particulate Emissions from a Laser Ignited Hydrogen Engine”, International Journal of Hydrogen Energy, 42(15), pp 10622-10635, April 2017. (Impact Factor2019: 4.939; DOI: 10.1016/j.ijhydene.2017.03.074; ISSN # 0360-3199). (Website/ Pdf)
  136. SMV Sagar, Avinash Kumar Agarwal*, “Experimental Investigation of Varying Composition of HCNG on Performance and Combustion Characteristics of a SI Engine”, International Journal of Hydrogen Energy, 42(18), pp 13234-13244, May 2017. (Impact Factor2019: 4.939; DOI: 10.1016/j.ijhydene.2017.03.063; ISSN # 0360-3199;). (Website/ Pdf)
  137. Nikhil Sharma, Avinash Kumar Agarwal*, “Effect of Fuel Injection Pressure on Particulate Emissions from a Gasohol (E15 & M15)-Fuelled Gasoline Direct Injection Engine”, Energy and Fuels, 31 (4), pp 4155–4164, 2017. (Impact Factor2019: 3.421; DOI: 10.1021/acs.energyfuels.6b02877; ISSN # 0887-0624). (Website/ Pdf)
  138. Akhilendra P. Singh, Avinash K. Agarwal*, “Partially Homogenous Charge Compression Ignition Engine Development for Low Volatility Fuels”, Energy and Fuels, Vol. 31 (3), pp. 3164–3181, 2017. (Impact Factor2019: 3.421; DOI: 10.1021/acs.energyfuels.6b02832; ISSN # 0887-0624). (Website/ Pdf)
  139. Avinash Kumar Agarwal*, Akhilendra Pratap Singh, Rakesh Kumar Maurya, “Evolution, Challenges and Path Forward for Low Temperature Combustion Engines”, Progress in Energy and Combustion Science, Vol. 61, pp 1-56, July 2017. (Impact Factor2019: 28.938; DOI: 10.1016/j.pecs.2017.02.001; ISSN # 0360-1285). (Website/ Pdf)
  140. Avinash Kumar Agarwal*, Jaigopal Gupta, Atul Dhar, "Potential and Challenges for Large Scale Application of Biodiesel in Automotive Sector", Progress in Energy and Combustion Science, Vol. 61, pp. 113-149, July 2017. (Impact Factor2019: 28.938; DOI: 10.1016/j.pecs.2017.03.002; ISSN # 0360-1285). (Website/ Pdf)
  141. Akhilendra P. Singh, Avinash K. Agarwal*, “CI/PCCI Combustion Mode Switching of Diesohol Fuelled Production Engine”, SAE 2017-01-0738, SAE Special Publication-2017. (DOI: 10.4271/2017-01-0738). (Website/ Pdf)
  142. Ayush Jain, Akhilendra P. Singh, Avinash K. Agarwal*, “Effect of Split Fuel Injection and EGR on NOx and PM Emission Reduction in a Low Temperature Combustion (LTC) Mode Diesel Engine”, Energy, Vol. 122, pp. 249-264, March 2017. (Impact Factor2016: 6.082; DOI: 10.1016/j.energy.2017.01.050; ISSN # 0360-5442). (Website/ Pdf)
  143. Ayush Jain, Akhilendra Pratap Singh, Avinash Kumar Agarwal*, "Effect of Fuel Injection Parameters on Combustion Stability and Emissions of a Mineral Diesel Fueled Partially Premixed Charge Compression Ignition (PCCI) Engine", Applied Energy, Vol. 190, pp. 658-669, March 2017. (Impact Factor2016: 8.848; DOI: 10.1016/j.apenergy.2016.12.164; ISSN # 0306-2619). (Website/ Pdf)
  144. Rajesh Kumar Prasad, Siddhant Jain, Gaurav Verma, Avinash Kumar Agarwal*, “Laser Ignition and Flame Kernel Characterization of HCNG in a Constant Volume Combustion Chamber”, Fuel, Vol. 190, pp. 318-327, February 2017. (Impact Factor2016: 5.578; DOI: 10.1016/j.fuel.2016.11.003; ISSN # 0016-2361). (Website/ Pdf)
  145. Sanghoon Lee, Chang Sik Lee, Sungwook Park*, Jai Gopal Gupta, Rakesh Kumar Maurya, Avinash Kumar Agarwal, “Spray Characteristics, Engine Performance and Emission Analysis for Karanja Biodiesel and Its Blends”, Energy, Vol. 119, pp. 138-151, January 2017. (Impact Factor2016: 6.082; DOI: 10.1016/j.energy.2016.12.043; ISSN # 0360-5442). (Website/Pdf)
  146. Yeshudas Jiotode, Avinash Kumar Agarwal*, "Endoscopic Combustion Characterization of Jatropha Biodiesel in a Compression Ignition Engine", Energy, Vol. 119, pp. 845-851, January 2017. (Impact Factor2019: 6.082; DOI: 10.1016/j.energy.2016.11.056; ISSN # 0360-5442). (Website/Pdf)
  147. Pravesh Chandra Shukla, Tarun Gupta, Nitin Kumar Labhsetwar, Rohini Khobragade, Neeraj Gupta, and Avinash Kumar Agarwal*, “Effectiveness of Non-Noble Metal Based Diesel Oxidation Catalysts on Particle Number Emissions from Diesel and Biodiesel Exhaust”, Science of Total Environment (STOTEN), Vol. 574, pp. 1512-1520, January 2017. (Impact Factor2019: 6.551; DOI: http://dx.doi.org/10.1016/j.scitotenv.2016.08.155; ISSN # 0048-9697). (Website/ Pdf)
  148. Pravesh Chandra Shukla, Tarun Gupta, Nitin Kumar Labhsetwar and Avinash Kumar Agarwal*, “Trace Metals and Ions in Particulates Emitted by Biodiesel Fuelled Engine”, Fuel, Vol. 188, pp. 603-609, January 2017. (Impact Factor2019: 5.578; DOI: http://dx.doi.org/10.1016/j.fuel.2016.10.059; ISSN # 0016-2361). (Website/ Pdf)
  149. Vikram Kumar, Sujeet Kumar Sinha*, Avinash Kumar Agarwal, “Tribological Studies of Epoxy Composites with Solid and Liquid Fillers”, Tribology International, Vol. 105, pp. 27-36, January 2017. (Impact Factor2016: 4.271; DOI: http://dx.doi.org/10.1016/j.triboint.2016.09.010; ISSN # 0301-679X). (Website/ Pdf)
  150. 2016

  151. M. Sarveshwar Reddy, Nikhil Sharma, Avinash Kumar Agarwal*, “Effect of Straight Vegetable Oil Blends and Biodiesel Blends on Wear of Mechanical Fuel Injection Equipment of a Constant Speed Diesel Engine”, Renewable Energy, Vol. 99, pp. 1008-1018, December 2016. (Impact Factor2016: 6.274; DOI: http://dx.doi.org/10.1016/j.renene.2016.07.072; ISSN # 0960-1481). (Website/ Pdf)
  152. Avinash Kumar Agarwal*, Abhay Shrivastava, Rajesh Kumar Prasad, “Evaluation of Toxic Potential of Particulates Emitted from Jatropha Biodiesel Fuelled Engine”, Renewable Energy, Vol. 99, pp. 564-572, December 2016. (Impact Factor2019: 6.274; DOI: http://dx.doi.org/10.1016/j.renene.2016.07.056; ISSN # 0960-1481). (Website/ Pdf)
  153. Avinash Kumar Agarwal*, Akhilendra Pratap Singh, Anuj Agarwal, Joonho Jeon, Chang Sik Lee, Sungwook Park, “Spatial Combustion Analysis of Biodiesel Fuelled Engine using Combustion Chamber Endoscopy and Modeling”, Renewable Energy, Vol. 98, pp. 292-303, December 2016. (Impact Factor2019: 6.274; DOI:10.1016/j.renene.2016.02.005; ISSN # 0960-1481). (Website/ Pdf)
  154. Avinash Kumar Agarwal*, Pravesh Chandra Shukla, Chetankumar Patel, Jai Gopal Gupta, Nikhil Sharma, Rajesh Kumar Prasad, Rashmi A. Agarwal, “Unregulated Emissions and Health Risk Potential From Biodiesel (KB5, KB20) and Methanol Blend (M5) Fuelled Transportation Diesel Engines”, Renewable Energy, Vol. 98, pp. 283-291, December 2016. (Impact Factor2016: 6.274; DOI:10.1016/j.renene.2016.03.058; ISSN # 0960-1481). (Website/ Pdf)
  155. Akhilendra Pratap Singh, Anuj Pal, Avinash Kumar Agarwal*, “Comparative Particulate Characteristics of Hydrogen, CNG, HCNG, Gasoline and Diesel Fueled Engines”, FUEL, Vol. 185, pp. 491-499, December 2016. (Impact Factor2016: 5.578; DOI: http://dx.doi.org/10.1016/j.fuel.2016.08.018; ISSN # 0016-2361). (Website/ Pdf)
  156. Avinash Kumar Agarwal*, Jai Gopal Gupta, Rakesh Kumar Maurya, Woong Il Kim, Sanghoon Lee, Chang Sik Lee, and Sungwook Park, “Spray Evolution, Engine Performance, Emissions and Combustion Characterization of Karanja Biodiesel Fuelled Common Rail Turbocharged Direct Injection Transportation Engine”, International Journal of Engine Research, Vol. 17 (10): pp. 1092-1107, December 2016. (Impact Factor2019: 2.382; DOI: 10.1177/1468087416641802; ISSN # 1468 0874). (Website/ Pdf)
  157. Chetan Kumar Patel, Sanghoon Lee, Nachiketa Tiwari, Avinash Kumar Agarwal*, Chang Sik Lee, Sungwook Park, “Spray Characterization, Combustion, Noise and Vibrations Investigations of Jatropha Biodiesel Fuelled Genset Engine”, FUEL, Vol. 185, pp. 410-420, December 2016. (Impact Factor2019: 5.578; DOI: http://dx.doi.org/10.1016/j.fuel.2016.08.003; ISSN # 0016-2361). (Website/ Pdf)
  158. Yeshudas Jiotode, Avinash Kumar Agarwal*, “In-cylinder Combustion Visualization of Jatropha Straight Vegetable Oil and Mineral Diesel using High Temperature Industrial Endoscopy for Spatial Temperature and Soot Distribution”, Fuel Processing Technology, Vol. 153, pp. 9–18, December 2016. (Impact Factor2016: 4.982; DOI: 10.1016/j.fuproc.2016.07.027; ISSN # 0378-3820). (Website/ Pdf)
  159. Gaurav Verma, Hemant Sharma, Sukrat Thipse, Avinash Kumar Agarwal*, “Spark Assisted Premixed Charge Compression Ignition Engine Prototype Development”. Fuel Processing Technology, Vol. 152, pp 413-420, November 2016. (Impact Factor2019: 4.982; DOI: 10.1016/j.fuproc.2016.07.006; ISSN # 0378-3820). (Website/ Pdf)
  160. Yeshudas Jiotode, Avinash Kumar Agarwal*, “Endoscopic Combustion Visualization for Spatial Distribution of Soot and Flame Temperature in a Diesohol Fueled Compression Ignition Engine”, Energy and Fuels, Vol. 30 (11), pp. 9850–9858, 2016. (Impact Factor2019: 3.421; DOI:10.1021/acs.energyfuels.6b01585; ISSN # 0887-0624). (Website/ Pdf)
  161. Avinash Kumar Agarwal*, Vikas Katiyar, Kushagra Singh, “Optimisation of Karanja/Jatropha-Methanol Emulsification Variables and Their Engine Evaluation”, Renewable Energy, Vol. 96, Part A, pp. 433-441, October 2016. (Impact Factor2019: 6.274; DOI:10.1016/j.renene.2016.04.092; ISSN # 0960-1481). (Website/ Pdf)
  162. SMV Sagar, Avinash Kumar Agarwal*, “Experimental Validation of Accuracy of Dynamic Hydrogen-Compressed Natural Gas Mixing System Using a Single Cylinder Spark Ignition Engine”, International Journal of Hydrogen Energy, Vol. 41(32), pp. 14272-14282, August 2016. (Impact Factor2016: 4.939; DOI:10.1016/j.ijhydene.2015.10.012; ISSN # 0360-3199). (Website/ Pdf)
  163. Gaurav Verma, Rajesh Kumar Prasad, Rashmi A. Agarwal, Siddhant Jain, Avinash Kumar Agarwal*, “Experimental Investigations of Combustion, Performance and Emission Characteristics of a Hydrogen Enriched Natural Gas Fuelled Prototype Spark Ignition Engine”, Fuel, Vol. 178, pp. 209-217; August 2016. (Impact Factor2016: 5.578; DOI: 10.1016/j.fuel.2016.03.022; ISSN # 0016-2361). (Website/ Pdf)
  164. Chetankumar Patel, Avinash Kumar Agarwal*, Nachiketa Tiwari, Sanghoon Lee, Chang Sik Lee, Sungwook Park, “Combustion, Noise, Vibrations and Spray Characterization for Karanja Biodiesel Fuelled Engine”, Applied Thermal Engineering, Vol. 106, August 2016, pp 506-517. (Impact Factor2016: 4.725; DOI:10.1016/j.applthermaleng.2016.06.025; ISSN # 1359-4311). (Website/ Pdf)
  165. Pravesh Chandra Shukla, Tarun Gupta, Nitin Kumar Labhsetwar, Avinash Kumar Agarwal*, “Development of Low Cost Mixed Metal Oxide Based Diesel Oxidation Catalysts and Their Comparative Performance Evaluation”, RSC Advances, 2016, 6, pp. 55884-55893 (Impact Factor2019: 3.119; DOI: 10.1039/C6RA06021H; ISSN # 2046-2069). (Website/ Pdf)
  166. Akhilendra Pratap Singh, Avinash Kumar Agarwal*, “Diesoline, Diesohol and Diesosene Fuelled HCCI Engine Development", ASME Journal of Energy Resources Technology, 138(5): 052212-1-052212-13, 2016. (Impact Factor2019: 3.183; DOI: 10.1115/1.4033571; ISSN # 0195-0738). (Website/ Pdf)
  167. Tadveer Singh Hora, Avinash Kumar Agarwal*, “Effect of Varying Compression Ratio on Combustion, Performance, and Emissions of a Hydrogen Enriched Compressed Natural Gas Fuelled Engine”, Journal of Natural Gas Science and Engineering, Vol. 31, pp. 819-828, April 2016. (Impact Factor2019: 3.841; DOI: 10.1016/j.jngse.2016.03.041; ISSN # 1875-5100). (Website/ Pdf)
  168. Nikhil Sharma, Avinash Kumar Agarwal*, “Microscopic and Macroscopic Spray Characteristics of GDI Injector Using Gasohol Fuels at Various Injection Pressures”, SAE 2016-01-0868, SAE Special Publication-2016. (DOI: 10.4271/2016-01-0868). (Website/ Pdf)
  169. Chetankumar Patel, Nikhil Sharma, Nachiketa Tiwari, Avinash Kumar Agarwal*, “Effects of Spray Droplet Size and Velocity Distributions on Gaseous Emissions from a Single Cylinder Biofuel Engine”, SAE 2016-01-0994, SAE Special Publication-2016. (DOI: 10.4271/2016-01-0994). (Website/ Pdf)
  170. Jai Gopal Gupta, Avinash Kumar Agarwal*, “Macroscopic and Microscopic Spray Characteristics of Diesel and Karanja Biodiesel Blends”, SAE 2016-01-0869, SAE Special Publication-2016. (Impact Factor2019: 0.51; DOI: 10.4271/2016-01-0869). (Website/ Pdf)
  171. Suresh Gadekar, Akhilendra Pratap Singh, Avinash Kumar Agarwal*, “Tomographic PIV Evaluation of In-cylinder Flow Evolution and Effect of Engine Speed”, SAE 2016-01-0638, SAE Special Publication-2016. (Impact Factor2019: 0.51;DOI: 10.4271/2016-01-0638). (Website/ Pdf)
  172. Tadveer Singh Hora, Pravesh Chandra Shukla, Avinash Kumar Agarwal*, “Particulate Emissions from Hydrogen Enriched Compressed Natural Gas Engine”, FUEL, Vol. 166, pp. 574-580, February 2016. (Impact Factor2019: 5.578; DOI:10.1016/j.fuel.2015.11.035; ISSN # 0016-2361). (Website/ Pdf)
  173. Anuj Pal, Avinash Kumar Agarwal*, “Effect of Laser Pulse Energy on Laser Ignition of Port Fuel Injected Hydrogen Engine”, International Journal of Hydrogen Energy, Vol. 41 (1), pp 675-682, January 2016. (Impact Factor2019: 4.939; DOI: doi: 10.1016/j.ijhydene.2015.10.012; ISSN # 0360-3199). (Website/ Pdf)
  174. Avinash Kumar Agarwal*, Anuj Agarwal, Akhilendra Pratap Singh, “Evolution, Trends and Applications of Endoscopy in Internal Combustion Engines”, Journal of Energy and Environmental Sustainability, Vol. 1, pp 56-66, January 2016. (ISSN # 2455-2259). (Website/ Pdf)
  175. Gayatri K. Mistri, Suresh K. Aggarwal, Douglas Longman, Avinash K. Agarwal*, “Performance and Emission Investigations of Jatropha and Karanja Biodiesels in a Single-Cylinder Compression-Ignition Engine Using Endoscopic Imaging”, ASME Journal of Energy Resources Technology, January 2016, Vol. 138 / 0112021-13. (Impact Factor2019: 3.183; DOI: 10.1115/1.4031317; ISSN # 0195-0738). (Website/ Pdf)
  176. 2015

  177. Vikram Kumar, Sujeet Sinha, Avinash Kumar Agarwal*, “Tribological Studies of Epoxy and its Composite Coatings on Steel in Dry and Lubricated Sliding”, Tribology-Materials, Surfaces&Interfaces, Vol. 9(3), pp 144-153, September 2015. (DOI: 10.1179/1751584X15Y.0000000015; ISSN # 1751-5831. (Website/ Pdf)
  178. Avinash Kumar Agarwal*, Deepak Khurana, Atul Dhar, “Improving Oxidation Stability of Biodiesels Derived from Karanja, Neem and Jatropha: Step Forward in the Direction of Commercialization”, Journal of Cleaner Production, Vol. 107, pp. 646-652, November 2015. (Impact Factor2019: 7.246; DOI: 10.1016/j.jclepro.2015.05.055; ISSN # 0959-6526). (Website/ Pdf)
  179. Avinash Kumar Agarwal*, Prakhar Bothra, Pravesh Chandra Shukla, “Particulate Characterization of CNG Fuelled Public Transport Vehicles at Traffic Junctions”, Aerosol and Air Quality Research, Volume 15(5), pp. 2168-2174, October 2015. (Impact Factor2016: 2.754; DOI: 10.4209/aaqr.2015.02.0084; ISSN # 1680-8584). (Website/ Pdf)
  180. Avinash Kumar Agarwal*, Paras Gupta, Atul Dhar, “Combustion, Performance and Emissions Characteristics of a Newly Developed CRDI Single Cylinder Diesel Engine”, Sadhana, Vol. 40(6), pp 1937-1954, September 2015. (Impact Factor2019: 0.849; DOI:10.1007/s12046-015-0428-9; ISSN # 0256-2499). (Website/ Pdf)
  181. Avinash Kumar Agarwal*, Atul Dhar, “Biofuels and the Hybrid Fuel Sector”, Proceedings of the Indian National Science Academy, Thematic Issue: Science Based Technologies for Sustainable and Adequate Energy of India, Volume 81(4), pp. 775-786, September 2015. (Impact Factor2017: 0.754; DOI: 10.16943/ptinsa/2015/v81i4/48296 ; ISSN: 0370-0046). (Website/ Pdf)
  182. Tanmay Kar, Avinash Kumar Agarwal*, “Development of a Single Cylinder CNG Direct Injection Engine and Its Performance, Emissions and Combustion Characteristics”, International Journal of Oil, Gas and Coal Technology, Volume 10(2), pp. 204 – 220, 2015. (Impact Factor2020: 0.752; DOI: 10.1504/IJOGCT.2015.070839; ISSN # 1753-3309). (Website/ Pdf)
  183. Pravesh Chandra Shukla, Tarun Gupta, Nitin Kumar Labhsetwar, Avinash Kumar Agarwal*, “Physico-Chemical Speciation of Particulates Emanating from Karanja Biodiesel Fuelled Automotive Engine", FUEL, Volume 162, pp. 84-90, December 2015. (Impact Factor2019: 5.578; DOI: 10.1016/j.fuel.2015.07.076; ISSN # 0016-2361). (Website/ Pdf)
  184. Tadveer Singh Hora, Avinash Kumar Agarwal*, “Experimental Study of the Composition of Hydrogen Enriched Compressed Natural Gas on Engine Performance, Combustion and Emission Characteristics”, FUEL, Volume 160, pp. 470–478, November 2015. (Impact Factor2019: 5.578; DOI: 10.1016/j.fuel.2015.07.078; ISSN # 0016-2361). (Website/ Pdf)
  185. Jai Gopal Gupta, Avinash Kumar Agarwal*, Suresh K. Aggarwal, “Particulate Emissions from Karanja Biodiesel Fueled Turbocharged CRDI Sports Utility Vehicle Engine”, ASME Journal of Energy Resources Technology, November 2015, Vol. 137 (6), 0645031-6. (Impact Factor2019: 3.183; DOI: 10.1115/1.4031006; ISSN # 0195-0738). (Website/ Pdf)
  186. Anuj Pal, Avinash Kumar Agarwal*, "Effect of Compression Ratio on Combustion, Performance and Emissions of a Laser Ignited Single Cylinder Hydrogen Engine”, International Journal of Hydrogen Energy, Volume 40 (36), pp. 12531-12540, September 2015. (Impact Factor2019: 4.939; DOI:10.1016/j.ijhydene.2015.07.051; ISSN # 0360-3199). (Website/ Pdf)
  187. Avinash Kumar Agarwal*, Pravesh Chandra Shukla, Jai Gopal Gupta, Chetankumar Patel, Rajesh Kumar Prasad, Nikhil Sharma, “Unregulated Emissions from a Gasohol (E5, E15, M5, and M15) Fuelled Spark Ignition Engine”, Applied Energy, Volume 154, pp 732-741, September 2015. (Impact Factor2019: 8.848; DOI: 10.1016/j.apenergy.2015.05.052; ISSN # 0306-2619). (Website/ Pdf)
  188. Avinash Kumar Agarwal*, Sibendu Som, Pravesh Chandra Shukla, Harsh Goyal, Douglas Longman, "In-Nozzle Flow and Spray Characteristics for Mineral Diesel, Karanja, and Jatropha Biodiesels" Applied Energy, Volume 156(15), pp.138–148, October 2015. (Impact Factor2019: 8.848; DOI: 10.1016/j.apenergy.2015.07.003; ISSN # 0306-2619). (Website/ Pdf)
  189. Avinash Kumar Agarwal*, Anuj Agarwal, Akhilendra Pratap Singh, “Time Resolved In-situ Biodiesel Combustion Visualization Using Engine Endoscopy”, Measurement, 69, pp. 236-249, June 2015. (Impact Factor2019: 3.364; DOI: 10.1016/j.measurement.2015.03.008; ISSN # 0263-2241). (Website/ Pdf)
  190. Avinash Kumar Agarwal*, Tarun Gupta, Jithin Lukose, Akhilendra Pratap Singh, “Particulate Characterization and Size Distribution in the Exhaust of a Gasoline Homogeneous Charge Compression Ignition Engine”, Aerosol and Air Quality Research, 15 (2), pp. 504-516, April 2015. (Impact Factor2016: 2.754; DOI: 10.4209/aaqr.2014.01.0021; ISSN # 1680-8584. (Website/ Pdf)
  191. Chetan Kumar Patel, Nachiketa Tiwari, Avinash Kumar Agarwal*, “Noise, Vibrations and Combustion Investigations of Preheated Jatropha Oil in a Single Cylinder Genset Engine”, SAE 2015-01-1668, SAE Special Publication-2015. (Impact Factor2019: 0.51; DOI:10.4271/2015-01-1668). (Website/ Pdf)
  192. Jai Gopal Gupta, Avinash Kumar Agarwal*, “Unregulated and Regulated Emissions from Biodiesel Fuelled CRDI SUV Engine”, SAE 2015-01-0889, SAE Special Publication-2015. (Impact Factor2019: 0.51; DOI: 10.4271/2015-01-0889). (Website/ Pdf)
  193. Akhilendra Pratap Singh, Aditya Gupta, Avinash Kumar Agarwal*, “Tomographic Particle Image Velocimetry for Flow Analysis in a Single Cylinder Optical Engine”, SAE 2015-01-0599, SAE Special Publication-2015 and SAE International Journal of Materials and Manufacturing, Volume 8(2), pp 472-481, April 2015. (Impact Factor2019: 0.93; DOI: 10.4271/2015-01-0599; ISSN# 1946-3979). (Website/ Pdf)
  194. Avinash Kumar Agarwal*, Prakhar Bothra, Tarun Gupta, Pravesh Chandra Shukla, “An Evaluation of the Emission Profile for Two-Wheelers at a Traffic Junction” Particuology, Vol. 18, pp 112-119, February 2015. (Impact Factor2016: 2.707; DOI: 10.1016/j.partic.2014.01.007; ISSN # 1674-2001). (Website/ Pdf)
  195. Avinash Kumar Agarwal*, Tarun Gupta, Prakhar Bothra, Pravesh Chandra Shukla, “Emission Profiling of Diesel and Gasoline Cars at a City traffic Junction”, Particuology, Vol. 18, pp. 186-193, February 2015. (Impact Factor2016: 2.707; DOI: 10.1016/j.partic.2014.06.008; ISSN #1674-2001). (Website/ Pdf)
  196. Anuj Pal, Avinash Kumar Agarwal*, “Comparative Study of Laser Ignition and Conventional Electrical Spark Ignition Systems in a Hydrogen Fuelled Engine", International Journal of Hydrogen Energy, Vol. 40(5), pp 2386-2395, February 2015. (Impact Factor2016: 4.939; DOI: 10.1016/j.ijhydene.2014.12.030; ISSN # 0360-3199). (Website/ Pdf)
  197. Atul Dhar, Avinash Kumar Agarwal*, “Experimental Investigations of the Effect of Pilot Injection on Performance, Emissions and Combustion Characteristics of Karanja Biodiesel Fuelled CRDI Engine”, Energy Conversion and Management, Vol. 93, pp 357-366, March 2015. (Impact Factor2016: 8.208; DOI: 10.1016/j.enconman.2014.12.090; ISSN # 0196-8904). (Website/ Pdf)
  198. Suraj Bhan Singh, Atul Dhar, Avinash Kumar Agarwal*, "Technical Feasibility Study of Butanol-Gasoline Blends for Powering Medium-Duty Transportation Spark Ignition Engine", Renewable Energy, 76, pp. 706-716, April 2015. (Impact Factor2016: 6.274; DOI: 10.1016/j.renene.2014.11.095; ISSN # 0960-1481). (Website/ Pdf)
  199. Avinash Kumar Agarwal*, Atul Dhar, Jai Gopal Gupta, Woong Il Kim, Kibong Choi, Chang Sik Lee, Sungwook Park, “Effect of Fuel Injection Pressure and Injection Timing of Karanja Biodiesel Blends on Fuel Spray, Engine Performance, Emissions and Combustion Characteristics”, Energy Conversion and Management, Vol. 91, pp. 302-314, February 2015. (Impact Factor2016: 8.208; DOI: 10.1016/j.enconman.2014.12.004; ISSN # 0196-8904). (Website/ Pdf)
  200. Avinash Kumar Agarwal*, Tarun Gupta, Pravesh C Shukla, Atul Dhar, “Particulate Emissions From Biodiesel Fuelled CI Engines”, Energy Conversion and Management, 94, pp. 311-330, 2015. (Impact Factor2016: 5.472; DOI: 10.1016/j.enconman.2014.12.094; ISSN # 0196-8904). (Website/ Pdf)
  201. Atul Dhar, Avinash Kumar Agarwal, "Effect of Karanja Biodiesel Blends on Particulate Emissions from a Transportation Engine", Fuel, Vol. 141, pp 154-163, February 2015. Impact Factor2019: 5.578; DOI: 10.1016/j.fuel.2014.09.124; (ISSN # 0016-2361). (Website/ Pdf)
  202. Rakesh Kumar Maurya, Avinash Kumar Agarwal, “Combustion and Emission Characterization of n-Butanol Fuelled HCCI Engine”, ASME Journal of Energy Resources and Technology, Vol. 137 (1), pp. 011101-12 , January 2015. Impact Factor2019: 3.183; DOI: 10.1115/1.4027898; (ISSN # 0195-0738). (Website/ Pdf)
  203. Rakesh Kumar Maurya, Avinash Kumar Agarwal, "Experimental Investigations of Particulate Size and Number Distribution in a Ethanol and Methanol Fuelled HCCI Engine", ASME Journal of Energy Resource Technology, Vol. 137 (1), pp 012201-10, January 2015. (ISSN # 0195-0738). (Website/ Pdf)
  204. 2014

  205. Kewal Dharamshi, Avinash Kumar Agarwal*, “Parametric Study of a Laser Ignited Hydrogen-Air Mixture in a Constant Volume Combustion Chamber”, International Journal of Hydrogen Energy, Vol. 39 (35), pp. 20207-20215, December 2014. (Impact Factor2019: 4.939; DOI: 10.1016/j.ijhydene.2014.09.127; ISSN # 0360-3199). (Website/ Pdf)
  206. Kewal Dharamshi, Dhananjay Kumar Srivastava, Avinash Kumar Agarwal, “Combustion Characteristics and Flame-Kernel Development of a Laser Ignited Hydrogen-Air Mixture in a Constant Volume Combustion Chamber”, International Journal of Hydrogen Energy, Vol 39 (1-2), pp 593-601, January 2014. (ISSN # 0360-3199). (Website/ Pdf)
  207. Paras Gupta, Atul Dhar, Avinash Kumar Agarwal, "Experimental Investigations of a Single Cylinder Genset Engine with Common Rail Fuel Injection System" Thermal Science: International Scientific Journal, Vol. 18, No. 1, pp. 249-258, 2014. (ISSN # 0354-9836). (Website/ Pdf)
  208. Pravesh Chandra Shukla, Tarun Gupta, Avinash Kumar Agarwal, “A Comparative Morphological Study of Primary and Aged Particles Emitted from a Biodiesel (B20) vis-à-vis Diesel Fuelled CRDI Engine” Aerosol and Air Quality Research, Vol. 14 (3), pp. 934-42, April 2014. Impact Factor2019: 2.735; DOI: 10.4209/aaqr.2013.05.0162; (ISSN 1680-8584). (Website/ Pdf)
  209. Rakesh Kumar Maurya, Avinash Kumar Agarwal, “Effect of Intake Air Temperature and Air-Fuel Ratio on Particulates in Gasoline and n-Butanol Fuelled HCCI Engine” International Journal of Engine Research. Vol. 15(7), pp 789-804, October 2014 (Impact Factor2019: 2.382; DOI: 10.1177/1468087413516617; ISSN # 1468 0874). (Website/ Pdf)
  210. Rakesh Kumar Maurya, Avinash Kumar Agarwal, “Experimental Investigations of Performance, Combustion and Emission Characteristics of Ethanol and Methanol Fuelled HCCI Engine” Fuel Processing Technology, Vol. 126, pp. 38-48, October 2014. (ISSN # 0378-3820). (Website/ Pdf)
  211. Gajendra Singh, Akhilendra Pratap Singh, Avinash Kumar Agarwal, “Experimental Investigation of Combustion, Performance and Emission Characterization of Biodiesel Fuelled HCCI Engine Using External Mixture Formation Technique”, Sustainable Energy Technologies and Assessment, Vol. 6, pp. 116-128, June 2014. (ISSN # 2213-1388). (Website/ Pdf)
  212. Rakesh Kumar Maurya, Avinash Kumar Agarwal, “Particulate Morphology and Toxicity of an Alcohol Fuelled HCCI Engine” SAE Journal of Fuels and Lubricants, Vol.7, pp. 323-336, April 2014. (Ref. No. 13JFL-0003) (ISSN # 1946-3952). (Website/ Pdf)
  213. Ernst Wintner, Heinrich Kofler, Avinash Kumar Agarwal*, Margarita Deneva and Marin Nenchev Nenchev, “Laser Ignition of Engines –A contribution to environmental protection and a challenge to laser technology”, Annual Journal of Electronics, Vol. 8, pp. 1-8, 2014. (ISSN: 1314-0078). (Website/ Pdf)
  214. Dhananjay Kumar Srivastava, Ernst Wintner, Avinash Kumar Agarwal, “Effect of Laser Pulse Energy on the Laser Ignition of Compressed Natural Gas Fuelled Single Cylinder Engine”, Optical Engineering (SPIE), Vol. 53 (05), 056120, May 2014. (ISSN # 0091-3286). (Website/ Pdf)
  215. Atul Dhar, Avinash Kumar Agarwal, “Effect of Karanja Biodiesel Blends on Engine Wear in a Transportation Engine”, FUEL, Vol. 134, pp. 81-89, October 2014. (ISSN # 0016-2361). (Website/ Pdf)
  216. Atul Dhar, Avinash Kumar Agarwal, “Experimental Investigation of Effect of Karanja Biodiesel Blend on Tribological Properties of Lubricating Oil in a Compression Ignition Engine”. FUEL, Vol. 130, pp. 112-119, August 2014. (ISSN # 0016-2361). (Website/ Pdf)
  217. Avinash Kumar Agarwal, Atul Dhar, Jaigopal Gupta, Woong Il Kim, Chang Sik Lee, Sungwook Park, “Effect of Fuel Injection Pressure and Injection Timing on Spray Characteristics and Particulate Size -Number Distribution in a Biodiesel Fuelled Common Rail Direct Injection Diesel Engine”, Applied Energy, Vol. 130, pp. 212-221, October 2014 (Impact Factor2019: 8.848; DOI: 10.1016/j.apenergy.2014.05.041; ISSN # 0306-2619). (Website/ Pdf)
  218. Dhananjay Kumar Srivastava, Ernst Wintner, Avinash Kumar Agarwal. “Effect of Focal Size on the Laser Ignition of Compressed Natural Gas-Air Mixture” Optics and Lasers in Engineering, Volume 58, pp 67-79, July 2014. (ISSN # 0143-8166). (Website/ Pdf)
  219. Avinash Kumar Agarwal, Himanshu Karare, Atul Dhar, “Combustion, Performance, Emissions and Particulate Characterization of Methanol–Gasoline Blend (Gasohol) Fuelled Medium Duty Spark Ignition Transportation Engine”, Fuel Processing Technology, Volume 121, pp 16-24, May 2014. (ISSN # 0378-3820). (Website/ Pdf)
  220. Dhananjay Kumar Srivastava, Avinash Kumar Agarwal, “Comparative Experimental Evaluation of Performance, Combustion and Emissions of Laser ignition with Conventional Spark Plug in a Compressed Natural Gas Fuelled Single Cylinder Engine”, Fuel, Volume 123(1), pp 113-122, May 2014. (ISSN # 0016-2361). (Website/ Pdf)
  221. Atul Dhar, Avinash Kumar Agarwal, “Performance, Emissions and Combustion Characteristics of Karanja Biodiesel in a Transportation Engine”, FUEL, Vol. 119(1), pp. 70-80, March 2014. (ISSN # 0016-2361). (Website/ Pdf)
  222. 2013

  223. Avinash Kumar Agarwal, Dhananjay Kumar Srivastava, Atul Dhar, Rakesh Kumar Maurya, Pravesh Chandra Shukla, AkhilendraPratap Singh, “Effect of Fuel Injection Timing and Pressure on Combustion, Emissions and Performance Characteristics of a Single Cylinder Diesel Engine”, Fuel, Vol. 111, pp 374-383, September 2013. (ISSN # 0016-2361). (Website/ Pdf)
  224. KewalDharamshi, Anuj Pal, Avinash Kumar Agarwal, "Comparative investigations of flame kernel development in a laser ignited hydrogen–air mixture and methane–air mixture", International Journal of Hydrogen Energy, Volume 38, Issue 25, August 2013, pp 10648-10653. (ISSN # 0360-3199). (Website/ Pdf)
  225. Avinash Kumar Agarwal*, Tarun Gupta, Neelabh Dixit, Pravesh Chandra Shukla, “Assessment of Toxic Potential of Primary and Secondary Particulates/ Aerosols from Biodiesel Vis-à-Vis Mineral Diesel Fuelled Engine” Inhalation Toxicology, Vol. 25, No. 6, pp 325-332, May 2013. (ISSN # 0895-8378). (Website/ Pdf)
  226. Avinash Kumar Agarwal, Atul Dhar, Dhananjay Srivastava, Rakesh Kumar Maurya, AkhilendraPratap Singh, “Effect of Fuel Injection Pressure on Diesel Particulate Size and Number Distribution in a CRDI Single Cylinder Research Engine”, Fuel, Vol. 107, pp 84-89, May 2013. (ISSN # 0016-2361). (Website/ Pdf)
  227. Avinash Kumar Agarwal, Jithin Lukose, Akhilendra Pratap Singh, Tarun Gupta, “Characterization of Exhaust Particulates from Diesel Fuelled Homogenous Charge Compression Ignition Combustion Engine”, Journal of Aerosol Science, 58, pp 71-85, April 2013. (ISSN # 0021-8502). (Website/ Pdf)
  228. Rakesh Kumar Maurya, Dev Datt Pal, Avinash Kumar Agarwal, “Digital Signal Processing of Cylinder Pressure Data for Combustion Diagnostics of HCCI Engine”, Mechanical Systems Signal Processing, Volume 36, Issue 1, March 2013, pp 95-109. (ISSN # 0888-3270).(Website/ Pdf)
  229. Rakesh Kumar Maurya, Avinash Kumar Agarwal, “Investigations on the effect of measurement errors on estimated combustion and performance parameters in HCCI combustion engine”, Measurement, Volume 46, Issue 1, January 2013, Pages 80-88. (ISSN# 0263-2241). (Website/ Pdf)
  230. Rakesh Kumar Maurya, Avinash Kumar Agarwal*, “Experimental Investigation of Cyclic Variations in HCCI Combustion Parameters for Gasoline Like Fuels Using Statistical Methods”, Applied Energy, Vol. 111, pp. 310-323, 2013. (Impact Factor2019: 8.848; DOI: 10.1016/j.apenergy.2013.05.004; ISSN # 0306-2619). (Website/ Pdf)
  231. Avinash Kumar Agarwal, Atul Dhar, “Experimental investigations of performance, emission and combustion characteristics of Karanja oil blends fuelled DICI engine”, Renewable Energy, 52, 2013, pp 283-291. (ISSN # 0960-1481). (Website/ Pdf)
  232. Avinash Kumar Agarwal, Vipul Chaudhury, Anuj Agarwal, Pravesh Chandra Shukla, “Comparative Study of Macroscopic Spray Parameters and Fuel Atomization Behaviour of Straight Vegetable Oils (Jatropha), its Biodiesel and Blends”, Thermal Science International Scientific Journal. Vol. 17 (1), pp 217-32, 2013. (doi:10.2298/TSCI120306109A)(ISSN # 0354-9836). (Website/ Pdf)
  233. Avinash Kumar Agarwal*, Deepak Khurana “Long-Term Storage Oxidation Stability of Karanja Biodiesel with the Use of Antioxidants”, Fuel Processing Technology, 106, pp. 447-452, February 2013. (Impact Factor2019: 4.982; DOI: 10.1016/j.fuproc.2012.09.011; ISSN # 0378-3820). (Website/ Pdf)
  234. Atul Dhar, Avinash Kumar Agarwal*, “Effect of Multiple Injections on Particulate Size-Number Distributions in a Common Rail Direct Injection Engine Fueled with Karanja Biodiesel Blends”, SAE Special Publication-2013, SAE 2013 -01-1554. (Impact Factor2019: 0.51; DOI: 10.4271/2013-01-1554, ISSN # 0148-7191). (Website/ Pdf)
  235. Rakesh Kumar Maurya, Avinash Kumar Agarwal*, “Experimental Investigation of Close-Loop Control of HCCI Engine Using Dual Fuel Approach”, SAE Special Publication-2013, SAE 2013 -01-1675. (Impact Factor2019: 0.51; DOI: 10.4271/2013-01-1675; ISSN # 0148-7191). (Website/ Pdf)
  236. Dhananjay Kumar Srivastava, Avinash Kumar Agarwal*, “Laser Ignition of Single Cylinder Engine and Effects of Ignition Location”, SAE Special Publication-2013, SAE 2013 -01-1631. (Impact Factor2019: 0.51; DOI: 10.4271/2013-01-1631; ISSN # 0148-7191). (Website/ Pdf)
  237. 2012

  238. Akhilendra Pratap Singh, Avinash Kumar Agarwal, “Combustion Characteristics of Diesel HCCI Engine: An Experimental Investigation Using External Mixture Formation Technique”, Applied Energy, Volume 99, November 2012, Pages 116-125. (ISSN # 0306-2619). (Website/ Pdf)
  239. Atul Dhar, Roblet Kevin, Avinash Kumar Agarwal, “Production of Biodiesel from High-FFA Neem Oil and its Performance, Emission and Combustion Characterization in a Single Cylinder DICI Engine”, Fuel Processing Technology, Volume 97, May 2012, Pages 118-129. (ISSN # 0378-3820). (Website/ Pdf)
  240. Rakesh Kumar Maurya, Avinash Kumar Agarwal, “Experimental Investigations of Gasoline HCCI Engine during Startup and Transients”, SAE 2011-01-2445,SAE International Journal of Engines, March 2012. (ISSN # 1946-3936). (Website/ Pdf)
  241. Jitendra N. Gangwar, Tarun Gupta, Avinash Kumar Agarwal, “Composition and comparative toxicity of particulate matter emitted from diesel and biodiesel fueled CRDI engine”, Atmospheric Environment, Volume 46, January 2012, pp 472-481. (ISSN # 1352-2310). (Website/ Pdf)
  242. Rakesh Kumar Maurya, Avinash Kumar Agarwal, “Statistical Analysis of the Cyclic Variation of Heat Release Parameters in HCCI Combustion of Methanol and Gasoline”, Applied Energy, Volume 89, Issue 1, January 2012, Pages 228-236. (ISSN # 0306-2619). (Website/ Pdf)
  243. Avinash Kumar Agarwal, AtulDhar, “Wear, Durability and Lubricating Oil Performance of a Straight Vegetable Oil (Karanja) Blend Fuelled DICI Engine”, Journal of Renewable and Sustainable Energy, 4, 063138, pp 1-13, 2012. (ISSN# 1941-7012). (Website/ Pdf)
  244. Avinash Kumar Agarwal, Vipul H Chaudhury, “Spray Characteristics of Biodiesel/ Blends in a High Pressure Constant Volume Spray Chamber” Accepted for publication in Experimental Thermal and Fluid Science, Volume 42, pp. 212–218, 2012. (ISSN # 0894-1777). (Website/ Pdf)
  245. 2011

  246. Rakesh Kumar Maurya, Avinash Kumar Agarwal, “Effect of Start of Injection on the Particulate Emitted by Methanol Fuelled HCCI Engine”, SAE International Journal of Fuels and Lubricants, Volume 4, Issue 2, December 2011, pp 204-222. (ISSN # 1946-3952). (Website/Pdf)
  247. Dhananjay Kumar Srivastava, Avinash Kumar Agarwal, Tarun Gupta, “Effect of Engine Load on Size and Number Distribution of Particulate Matter Emitted from a Direct Injection Compression Ignition Engine” Aerosol and Air Quality Research, Vol. 11, No. 7, pp 915–920, December 2011. (ISSN 1680-8584). (Website/Pdf)
  248. Avinash Kumar Agarwal, Sandeep Kumar Goyal, Dhananjay Kumar Srivastava, "Time Resolved Numerical Modeling of Oil Jet Cooling of a Medium Duty Diesel Engine Piston", International Communications in Heat and Mass Transfer, Volume 38, pp. 1080–1085, October 2011. (ISSN # 0735-1933). (Website/Pdf)
  249. Deepak Agarwal, Shrawan Kumar Singh, Avinash Kumar Agarwal, “Effect of Exhaust Gas Recirculation (EGR) on Performance, Emissions, Deposits and Durability of a constant Speed Compression Ignition Engine” Applied Energy, Vol. 88, pp 2900-2907, August 2011. (ISSN # 0306-2619). (Website/Pdf)
  250. Deepak Khurana, Avinash Kumar Agarwal, “Oxidation Stability, Engine Performance and Emissions Investigations of Karanja, Neem and Jatropha Biodiesel and Blends”, SAE 2011-01-0617, SAE Special Publication 2011 and SAE International Journal of Fuels and Lubricants, pp 76-83, June 2011. (Print ISSN # 1946-3952; Online ISSN # 1946-3960). (Website/Pdf)
  251. Rakesh Kumar Maurya, Avinash Kumar Agarwal, “Experimental Study of Combustion and Emission Characteristics of Ethanol Fuelled Port Injected Homogeneous Charge Compression Ignition (HCCI) Combustion Engine”, Applied Energy, Vol. 88, pp 1169-1180, April 2011. (ISSN # 0306-2619). (Website/Pdf)
  252. Rakesh Kumar Maurya, Avinash Kumar Agarwal, “Experimental investigation on the effect of intake air temperature and air-fuel ratio on cycle-to-cycle variations of HCCI combustion and performance parameters” Applied Energy, Vol. 88, pp 1153-1163, April 2011. (ISSN # 0306-2619). (Website/Pdf)
  253. Avinash Kumar Agarwal, Atul Dhar, “Performance, Emissions and Combustion Characterization of Biodiesel in a Generator Engine”, International Energy Journal, Volume 12, Issue 1, pp 105-114, March 2011. (ISSN # 1513-718X). (Website/Pdf)
  254. Rakesh Kumar Maurya, Dhananjay Kumar Srivastava, Avinash Kumar Agarwal, “Experimental Investigations of Particulate Emitted by an Alcohol Fuelled HCCI/ CAI Combustion Engine”, International Energy Journal, Volume 12, Issue 1, pp 29-38, March 2011. (ISSN # 1513-718X). (Website/Pdf)
  255. Tarun Gupta, Neelabh Dixit, Avinash Kumar Agarwal, “The Secondary Organic Carbon (SOC) Formation from a CRDI Automotive Diesel Engine Exhaust”, SAE 2011-01-0642, SAE Special Publication 2011. (DOI: 10.4271/2011-01-0642). (Website/Pdf)
  256. Avinash Kumar Agarwal*, “Experimental Investigation on Intake Air Temperature and Air-Fuel Ratio Dependence of Random and Deterministic Cyclic Variability in a Homogeneous Charge Compression Ignition Engine”, SAE 2011-01-1183, SAE Special Publication-2011 (SP-2312). (Impact Factor2019: 0.51; DOI: 10.4271/2011-01-1183; ISSN # 0148-7191). (Website/Pdf)
  257. Deepak Khurana, Avinash Kumar Agarwal*, “Oxidation Stability, Engine Performance and Emissions Investigations of Karanja, Neem and Jatropha Biodiesel and Blends”, SAE 2011-01-0617, SAE Special Publication-2011 (Impact Factor2019: 0.51; DOI: 10.4271/2011-01-0617; ISSN # 1946-3952). (Website/Pdf)
  258. T.T. Kivevele, Avinash K. Agarwal, Tarun Gupta, M.M. Mbarawa, “Oxidation Stability of Biodiesel Produced from Non-Edible Oils of African Origin”, SAE 2011-01-1202, SAE Special Publication 2011 (SAE COLL-TP-00160). (DOI: 10.4271/2011-01-1202). (Website/Pdf)
  259. Jitendra Gangwar, Tarun Gupta, Sudhir Gupta, Avinash Kumar Agarwal, “Emissions from diesel versus biodiesel fuel used in a CRDI SUV engine: PM mass and chemical composition” Inhalation Toxicology, Vol. 23(8), pp 449-458, 2011. (ISSN # 0895-8378). (Website/Pdf)
  260. Dhananjay Kumar Srivastava, Kewal Dharamshi, Avinash Kumar Agarwal, “Flame Kernel Characterization of Laser Ignition of Natural Gas - Air Mixture in a Constant Volume Combustion Chamber”, Optics and Lasers in Engineering, Vol. 49, pp 1201-1209, 2011. (ISSN # 0143-8166). (Website/Pdf)
  261. Avinash Kumar Agarwal, Tarun Gupta, Abhishek Kothari, “Particulate Emissions from Biodiesel Vs Diesel Fuelled Compression Ignition Engine”, “Renewable and Sustainable Energy Reviews”, Vol. 15, pp 3278-3300, 2011. (ISSN # 1364-0321). (Website/Pdf)
  262. 2010

  263. Tarun Gupta, Abhishek Kothari, Dhananjay Kumar Srivastava, Avinash Kumar Agarwal, “Measurement of Number and Size Distribution of Particles Emitted from a Mid-Sized Transportation Multipoint Port Fuel Injection Gasoline Engine”, Fuel, Volume 89, Issue 9, pp 2230-33, September 2010. (ISSN # 0016-2361). (Website/ Pdf)
  264. Avinash Kumar Agarwal, Atul Dhar, “Comparative Performance, Emission and Combustion Characteristics of Rice-bran Oil and Its Biodiesel in a Transportation Diesel Engine”, Journal of Engineering for Gas Turbine and Power, Transactions of ASME, Volume 132, Issue 6, pp 064503-1-4, June 2010. (ISSN # 0742-4795). (Website/ Pdf)
  265. Avinash Kumar Agarwal, Atul Dhar, “Experimental Investigations of Preheated Jatropha Oil Fuelled Direct Injection Compression Ignition Engine: Part-I, Performance, Emission and Combustion Characteristics” Journal of ASTM International, Volume 7, Issue 6, pp 1-13, June 2010. (ISSN # 1546-962X). (Website/ Pdf)
  266. Shailendra Sinha, Avinash Kumar Agarwal, “Experimental Investigation of the Effect of Biodiesel Utilization on Lubricating Oil Degradation and Wear of a Transportation CIDI Engine”, Journal of Engineering for Gas Turbine and Power, Transactions of ASME, Volume 132, Issue 4, April 2010. pp 8011-8019. (ISSN # 0742-4795). (Website/ Pdf)
  267. K. A. Anand, K. S. Anisia, Avinash Kumar Agarwal, Anil Kumar, “Hydrogenolysis of Glycerol with FeCo Macrocyclic Complex Bonded to Raney Nickel Support under Mild Reaction Conditions”, Canadian Journal of Chemical Engineering, Vol. 88(2), pp. 208-216, April 2010. (Impact Factor2019:1.687; DOI: 10.1002/cjce.20273; ISSN # 0008-4034). (Website/ Pdf)
  268. Avinash Kumar Agarwal, Atul Dhar, “Experimental Investigations of Preheated Jatropha Oil Fuelled Direct Injection Compression Ignition Engine: Part-II, Engine Durability and Effect on Lubricating Oil” Journal of ASTM International, Volume 7, Issue 2, pp 46-60, February 2010. (ISSN # 1546-962X). (Website/ Pdf)
  269. Avinash Kumar Agarwal*, Atul Dhar, “Karanja Oil Utilization in DI Engine by Preheating: Experimental Investigations of Engine Performance, Emissions and Combustion Characteristics, Part 1”, Journal of Automobile Engineering, Proceedings of IMechE, Part-D, Volume 224, Number 1, pp 73-84, 2010. (ISSN # 09544070). (Website/ Pdf)
  270. Avinash Kumar Agarwal, Tarun Gupta, Abhishek Kothari, “Toxic Potential Evaluation of Particulate Matter Emitted from a Constant Speed Compression Ignition Engine: A Comparison between Straight Vegetable Oil and Mineral Diesel”, Aerosol Science and Technology, Volume 44, Issue 9, pp 724-733, 2010 (ISSN # 0278-6826). (Website/ Pdf)
  271. Rajveer Singh Rathore, Dhananjay Kumar Srivastava, Avinash Kumar Agarwal, Nishith Verma, “Development of Surface Functionalized Activated Carbon Fiber for Control of NO and Particulate Matter”, Journal of Hazardous Materials, Volume 173, Issues 1-3, pp 211-222, 2010, (ISSN # 0304-3894). (Website/ Pdf)
  272. Avinash Kumar Agarwal*, Atul Dhar, “Karanja Oil Utilization in a Direct-Injection Engine by Preheating. Part 2: Experimental Investigations of Engine Durability and Lubricating Oil Properties”, Journal of Automobile Engineering, Proceedings of IMechE, Part-D, Vol. 224(1), pp. 85-97, 2010. (Impact Factor2019: 1.384; DOI: 10.1243/09544070JAUTO1267; ISSN # 09544070). (Website/ Pdf)
  273. 2009

  274. Shailendra Sinha, Avinash Kumar Agarwal, “Experimental Investigations of the Tribological Properties of Lubricating Oil from Biodiesel Fuelled Medium Duty Transportation CIDI Engine”, SAE Paper No. 2008-01-1385, SAE Special Publication SP-2176 (ISBN # 978-0-7680-2018-2),SAE International Journal of Fuels and Lubricants, April 2009 (1), pp 719-730. (Print ISSN # 1946-3952; Online ISSN # 1946-3960) (Website/ Pdf)
  275. Dhananjay Kumar Srivastava, Martin Weinrotter, Kurt Iskra, Avinash Kumar Agarwal, Ernst Wintner, ”Characterisation of Laser Ignition in Hydrogen-Air Mixtures in a Combustion Bomb” International Journal of Hydrogen Energy, Volume 34, Issue 5, March 2009, pp 2475-2482. (ISSN # 0360-3199). (Website/ Pdf)
  276. Atul Dhar, Vishal Saxena*, Avinash Kumar Agarwal, “Measurement of Dynamic Lubricating Oil Film Thickness between Piston Ring and Liner in a Motored Engine” Sensors and Actuators, Volume 149, Issue 1, January 2009, pp 7-15.(ISSN # 0924-4247). (Website/ Pdf)
  277. Avinash Kumar Agarwal, K. Rajamanoharan, “Experimental Investigations of Performance and Emissions of Karanja Oil and its Blends in a Single Cylinder Agricultural Diesel Engine”, Applied Energy, Vol. 86, No. 1, January 2009, pp 106-112. (ISSN # 0306-2619). (Website/ Pdf)
  278. Shailendra Sinha, Avinash Kumar Agarwal, “Rice Bran Oil Methyl Ester Fuelled Medium-Duty Transportation Engine: Long-Term Durability and Combustion Investigations” International Journal of Vehicle Design, Vol. 50, Nos. 1/2/3/4, 2009, pp 248-270.(ISSN # 0143-3369). (Website/ Pdf)
  279. Avinash Kumar Agarwal, Mritunjaya Kumar Shukla, “Portable Biogas Bottling Plant: A Practical Approach for Using Biogas as Transportation Fuel in Rural Areas”, International Journal of Oil, Gas and Coal Technologies, pp 379-388, Vol. 2, No. 4, 2009. (ISSN # 1753-3309). (Website/ Pdf)
  280. Rakesh Kumar Maurya, Avinash Kumar Agarwal, “Experimental Investigation of Effect of Intake Air Temperature and Mixture Quality on Combustion of Methanol and Gasoline Fuelled HCCI Engine”, Journal of Automobile Engineering, Proceedings of IMechE, Part-D, Volume 223, Number 11, pp 1445-1458, 2009. (ISSN # 09544070). (Website/ Pdf)
  281. Avinash Kumar Agarwal, Tanu Priya Bajaj, “Process Optimisation of Base Catalysed Transesterification of Karanja Oil for Biodiesel Production” International Journal of Oil, Gas and Coal Technologies, Vol. 2, No. 3, 2009, pp 297-310. (ISSN # 1753-3309). (Website/ Pdf)
  282. Rakesh Kumar Maurya, Avinash Kumar Agarwal, “Experimental Investigation of cycle-by-cycle variations in CAI/HCCI combustion of Gasoline and Methanol by varying different engine operating conditions”, SAE 2009-01-1345, SAE Special Publication SP-2242, 2009. (ISBN # 978-0-7680-2138-7). (Website/ Pdf)
  283. Avinash Kumar Agarwal, AtulDhar, “Performance, Emission and Combustion Characteristics of Jatropha Oil Blends in a Direct Injection Engine” SAE 2009-01-0947, SAE Special Publication SP-2239, 2009. (ISBN # 978-0-7680-2135-6). (Website/ Pdf)
  284. Dhananjay Kumar Srivastava, Martin Weinrotter, Henrich Kofler, Avinash Kumar Agarwal, Ernst Wintner, “Laser-assisted Homogeneous Charge Ignition in a Constant Volume Combustion Chamber” Optics and Lasers in Engineering, Volume47, 2009, pp 680–685. (ISSN # 0143-8166). (Website/ Pdf)
  285. 2008

  286. Deepak Agarwal, Lokesh Kumar, Avinash Kumar Agarwal, “Performance Evaluation of a Vegetable Oil Fuelled Compression Ignition Engine, Renewable Energy, Vol. 33, No. 6, June 2008, pp. 1147-1156. (ISSN # 0960-1481). (Website/ Pdf)
  287. Shailendra Sinha, Avinash Kumar Agarwal, Sanjeev Garg, “Biodiesel Development from Rice bran oil: Transesterification Process Optimization and Fuel Characterization” Energy Conversion and Management, Vol. 49, No. 5, May 2008, pp. 1248-1257. (ISSN # 0196-8904. (Website/ Pdf)
  288. Harish Kumar Gangwar, Avinash Kumar Agarwal, “Emission and Combustion Characteristics of Vegetable Oil (Jatropha Curcas) Blends in an Indirect Injection Transportation Engine”, International Energy Journal, Volume 9, March 2008, pp 43-51 (Special Issue on Biofuels: Opportunities and Technologies). (ISSN # 1513-718X). (Website/ Pdf)
  289. Harish Kumar Gangwar, Avinash Kumar Agarwal, “Combustion Characteristics of Jatropha Oil Blends in a Transportation Engine”, SAE Paper No. 2008-01-1383, SAE Special Publication SP-2176, 2008. (ISBN # 978-0-7680-2018-2). (Website/ Pdf)
  290. Bhaskar Mazumdar, Avinash Kumar Agarwal, “Performance, Emission and Combustion Characteristics of a Waste Cooking Oil Based Biodiesel Fuelled IDI Engine”, SAE Paper No. 2008-01-1384, SAE Special Publication SP-2176, 2008. (ISBN # 978-0-7680-2018-2). (Website/ Pdf)
  291. 2007

  292. H Ranner, P K Tiwari, H Kofler, M Lackner, E Wintner, A K Agarwal, F Winter, "Laser Cleaning of Optical Windows in Internal Combustion Engines", Optical Engineering, Vol. 46, No. 10, October 2007, pp 104301 (8 pages). (ISSN # 0091-3286) (Website/ Pdf)
  293. Deepak Agarwal, Avinash Kumar Agarwal, “Performance and Emissions Characteristics of Jatropha Oil (Preheated and Blends) in a Direct Injection Compression Ignition Engine” Applied Thermal Engineering, Volume 27, Issue 13, September 2007, Pages 2314-2323. (ISSN # 1359-4311). (Website/ Pdf)
  294. Shailendra Sinha, Avinash Kumar Agarwal, “Experimental Investigation of the Combustion Characteristics of Biodiesel (Rice Bran Oil Methyl Ester) Fuelled Direct Injection Transportation Diesel Engine”, Journal of Automobile Engineering, Proceedings of IMechE, Part-D, Vol. 221, Issue 8, August 2007, pp 921-932. (ISSN # 09544070). (Website/ Pdf)
  295. Avinash Kumar Agarwal, Sandeep Kumar Goyal, “Experimental and Numerical Investigations of Jet Impingement Cooling of Piston of Heavy-Duty Diesel Engine for Controlling the Non-Tail Pipe Emissions”, SAE paper no 2007-01-0763, SAE Special Publication SP-2132, 2007(ISBN # 978-0-7680-1922-3) and Transactions of SAE 2007: Journal of Passenger Cars: Electronic and Electrical Systems (Document Number: V116-7), April 2008. (Website/ Pdf)
  296. Sumit Pramanik, Avinash Kumar Agarwal, K. N. Rai, Ashish Garg, “Development of High Strength Hydroxyapatite by Solid-State-Sintering Process”, Ceramic International, Volume 33, Issue 3, April 2007, Pages 419-426. (ISSN # 0272-8842). (Website/ Pdf)
  297. Avinash Kumar Agarwal, Ashish Garg, D K Srivastava, and M K Shukla, “Experimental Wear Characterization of Titanium Based PVD Coatings for Automotive Applications Using Exhaust Gas Recirculation”, Surface and Coating Technology, Volume 201, Issue 13, March 2007, pp 6182-6188. (ISSN # 0257-8972). (Website/ Pdf)
  298. Avinash Kumar Agarwal, “Bio Fuels (Alcohols and Biodiesel) Applications as fuels for Internal Combustion Engines”, Progress in Energy and Combustion Science, Volume 33, Issue 3, pp 233-271, 2007. (ISSN # 0360-1285). (Website/ Pdf)
  299. Avinash Kumar Agarwal, “Guest Editorial”, Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 221 (8) pp. I, 2007. (Website/ Pdf)
  300. Dhananjay Kumar Shrivastava, Avinash Kumar Agarwal, “Effect of Liner Surface Properties on Wear, Friction and Surface Morphology in Non-Firing Engine Simulator”, Materials and Design, Volume 28, Issue 5, 2007, Pages 1632-1640. (ISSN # 0261-3069). (Website/ Pdf)
  301. 2006

  302. Deepak Agarwal, Shailendra Sinha, Avinash Kumar Agarwal, “Experimental Investigation of Control of NOx Emissions in Biodiesel Fuelled Compression Ignition Engine” Renewable Energy, Volume 31, Issue 14, Pages 2356-2369, November 2006. (ISSN # 0960-1481). (Website/ Pdf)
  303. Mani Bijoy Varghese, Avinash Kumar Agarwal, “Numerical Investigations of Piston Cooling Using Oil Jet in Heavy Duty Diesel Engines”, Journal of Engine Research, Proceedings of IMechE, Volume 7, Number 5, pp 411-422, 2006. (ISSN # 1468 0874). (Website/ Pdf)
  304. Dipankar Dwivedi, Avinash Kumar Agarwal, Mukesh Sharma, “Particulate Emission Characterization of a Biodiesel Vs Diesel Fuelled Compression Ignition Transport Engine: A Comparative Study” Atmospheric Environment, Volume 40, Issue 29, September 2006, Pages 5586-5595. (ISSN # 1352-2310). (Website/ Pdf)
  305. Shrawan Kumar Singh, Avinash Kumar Agarwal*, Dhananjay Kumar Srivastava, Mukesh Sharma, “Experimental Investigation of the Effect of Exhaust Gas Recirculation on Lubricating Oil Degradation and Wear of a Compression Ignition Engine”, ASME Journal of Engineering for Gas Turbine and Power, Vol. 128(4), pp. 921-927, October 2006. (Impact Factor2019: 1.804; DOI: 10.1115/1.2136368; ISSN # 0742-4795). (Website/ Pdf)
  306. Avinash Kumar Agarwal, Mukesh Sharma, “Furnace Design Improvements in Indian Cottage Sugar Industry (Khandsari) for Air Pollution prevention and Control”, Clean Air: International Journal on Energy for a Clean Environment, Volume 7, Issue 1, pp 59-75, 2006. (ISSN # 1561-4417). (Website/ Pdf)
  307. Shrawan Kumar Singh, Avinash Kumar Agarwal, Mukesh Sharma, “Experimental Investigations of Heavy Metal Addition in Lubricating Oil and Soot Deposition in an EGR Operated Engine”, Applied Thermal Engineering, Vol. 26, No. 2-3, pp 259-266, February 2006. (ISSN # 1359-4311). (Website/ Pdf)
  308. 2005

  309. Sumit Pramanik, Avinash Kumar Agarwal, K N Rai, “Chronology of Total Hip Joint Replacement and Material Development”, Trends in Biomaterials and Artificial Organs, Vol. 19, No. 1, pp 15-25, July 2005. (ISSN # 0971-1198). (Website/ Pdf)
  310. Sumit Pramanik, Avinash Kumar Agarwal, K N Rai, “Development of High Strength Hydroxyapatite for Hard Tissue Replacement”, Trends in Biomaterials and Artificial Organs, Vol. 19, No. 1, pp 45-49, July 2005. (ISSN # 0971-1198). (Website/ Pdf)
  311. Mukesh Sharma, Avinash Kumar Agarwal, K V L Bharathi, “Characterization of Exhaust Particulates from Diesel Engine”, Atmospheric Environment, Vol. 39, Issue 17, pp 3023-3028, June 2005. (ISSN # 1352-2310). (Website/ Pdf)
  312. Avinash Kumar Agarwal, “Experimental Investigations of the Effect of Biodiesel Utilization on Lubricating Oil Tribology in Diesel Engines” Journal of Automobile Engineering, Proceedings of IMechE, Part-D, Volume 219, Number 5, pp 703-714, May 2005. (ISSN # 09544070). (Website/ Pdf)
  313. Mani Bijoy Varghese, Sandeep Kumar Goyal, Avinash Kumar Agarwal, “Numerical and Experimental Investigation of Oil Jet Cooled Piston’ SAE Paper No. 2005-01-1382, SAE Special Publication SP-1945, pp 19-25, 2005. (ISBN # 0-7680-1590-1). (Website/ Pdf)
  314. Shailendra Sinha, Avinash Kumar Agarwal, “Performance Evaluation of a Biodiesel (Rice Bran Oil Methyl Ester) Fuelled Transport Diesel Engine”, SAE Paper No. 2005-01-1730, SAE Special Publication SP-1978,pp 159-166, 2005. (ISBN # 0-7680-1623-1). (Website/ Pdf)
  315. 2004

  316. Avinash Kumar Agarwal, Mukesh Sharma and L P Tewari, “Process Improvements in Khandsari (Cottage Sugar Industry) in India”, International Sugar Journal, Vol. CVI, Issue 1262, February 2004, pp 94-100. (ISSN # 0020-8841). (Website/ Pdf)
  317. Jayashree Bijwe, Avinash Kumar Agarwal, Atul Sharma, “Assessment of Lubricity of Biodiesel Blends in Reciprocating Wear Mode” SAE Paper No 2004-01-3068,Transactions of SAE 2004, Journal of Fuels & Lubricants, Section 4, pp 2117-2126, 2004. (ISBN # 0-7680-1553-7). (Website/ Pdf)
  318. Dhananjay Kumar Srivastava, Avinash Kumar Agarwal, “Experimental Investigations on the Effect of Liner Surface Properties on Wear in Non-Firing Engine Simulator”, SAE 2004-01-0605, SAE World Congress 2004 and SAE Special Publication SP-1820, pp 53-62, 2004. (ISBN # 0-7680-1356-9). (Website/ Pdf)
  319. 2003

  320. Avinash Kumar Agarwal, Jayashree Bijwe, L M Das “Wear Assessment In Biodiesel Fuelled Compression Ignition Engine", Journal Of Engineering For Gas Turbine And Power, Transactions of ASME, Volume 125, Number 3, pp 820- 826, July 2003.(ISSN # 0742-4795). (Website/ Pdf)
  321. Avinash Kumar Agarwal, Jayashree Bijwe, L M Das “Effect Of Biodiesel Utilisation On Wear Of Vital Parts In Compression Ignition Engine”, Journal Of Engineering For Gas Turbine And Power, Transactions of ASME, Volume 125, Number 2, pp. 604-611, April 2003.(ISSN # 0742-4795). (Website/ Pdf)
  322. 2001

  323. Avinash Kumar Agarwal, L M Das “Biodiesel Development And Characterization For Use As A Fuel In Compression Ignition Engine”, Journal Of Engineering For Gas Turbine And Power, Transactions of ASME, Volume 123, Number 2, pp 440- 447, April 2001. (ISSN # 0742-4795). (Website/ Pdf)
  1. Avinash Kumar Agarwal*, Akhilendra Pratap Singh. “Optical Diagnostics for Investigating the In-Cylinder Processes in Internal Combustion Engines,” Annals of the Indian National Academy of Engineering, Vol. XIII, April 2016, pp 224-246. (ISSN: # 0973-0540).
  2. Pawan Ghildiyal, Avinash Kumar Agarwal*, “Review of Commercial Biodiesel Production Technology,” ICFAI Journal of Science and Technology, Vol. 3(1), pp. 19-37, March 2007. (ISSN # 0973-2268).
  3. Avinash Kumar Agarwal*, Shrawan Kumar Singh, Shailendra Sinha, Mritunjay Kumar Shukla, “Effect of EGR on the Exhaust Gas Temperature and Exhaust Opacity in Compression Ignition Engines,” SADHANA (Indian Academy of Science Proceedings In Engineering Sciences), Vol. 29(3), pp. 275-284, June 2004. (Impact Factor2022:1.214; DOI: 10.1007/BF02703777; ISSN # 0256-2499).
  4. Dhananjay Kumar Srivastava, Avinash Kumar Agarwal*, “Experimental Evaluation of Effect of Surface Topography Features on Wear and Friction of Liner in a Non-Firing Engine Simulator,” Indian Journal of Tribology, Vol. 3(1-2), pp. 33-37, December 2004.
  5. G D Agarwal, Avinash Kumar Agarwal*, “Environmental Implications Of Using Biomass As An Alternative Source Of Energy: A Critical Assessment,” TIMES (TERI Information Monitor on Environmental Science), Vol. 4(2), pp 79-89, December 1999. (ISSN# 0971-8192).
  6. Avinash Kumar Agarwal*, G D Agarwal, “Recent Technologies for Conversion of Biomass into Energy, Fuels and Useful Chemicals,” TIMES (TERI Information Monitor on Environmental Science), Vol. 4(1), pp. 1-12, June 1999. (ISSN # 0971-8192).
  7. Avinash Kumar Agarwal*, “Vegetable Oil Vs. Diesel Fuel: Development and Use of Biodiesels in a Compression Ignition Engine,” TIDE (TERI Information Digest on Energy), Vol. 8(3), pp. 191 – 203, September 1998. (ISSN# 0971-085X).

    2022

  1. Vikram Kumar and Avinash Kumar Agarwal, “Effect of Injection Timing on The Performance and Emissions from Dual-Fuel Engine”, Paper No. SEEC-058, Presented in the Seventh International Conference on Sustainable Energy and Environmental Challenges (VII-SEEC), 16th -18th December 2022, Indian Institute of Technology BHU, India.
  2. Shanti Mehra, Avinash Kumar Agarwal, Hardikk Valera and Vikram Kumar, “Applicability of Dimethyl Ether (DME) As A Replacement for Conventional Diesel Fuel in a Tractor Engine” Paper No. SEEC-081, Presented in the Seventh International Conference on Sustainable Energy and Environmental Challenges (VII-SEEC), 16th -18th December 2022, Indian Institute of Technology BHU, India.
  3. Ankur Kalwar and Avinash Kumar Agarwal, “Emissions Assessment from M15 Fuelled BSVI SI Engine”, Paper No. SEEC-062, Presented in the Seventh International Conference on Sustainable Energy and Environmental Challenges (VII-SEEC), 16th -18th December 2022, Indian Institute of Technology BHU, India.
  4. Utkarsha Sonawane and Avinash Kumar Agarwal, “Experimental Study on Spray Characteristics of Diesel and Diethyl Ether Blends Under Split Injection Strategy”, Paper No. SEEC-053, Presented in the Seventh International Conference on Sustainable Energy and Environmental Challenges (VII-SEEC), 16th -18th December 2022, Indian Institute of Technology BHU, India.
  5. Ashutosh Jena and Avinash Kumar Agarwal, “Investigation of Spray Wall Impingement of Gasoline and Methanol Using Port Fuel Injector Under Crossflow Condition,” Paper No. SEEC-066, Presented in the Seventh International Conference on Sustainable Energy and Environmental Challenges (VII-SEEC), 16th -18th December 2022, Indian Institute of Technology BHU, India.
  6. Rahul Kumar Singh and Avinash Kumar Agarwal, “Impact of Methanol Addition into Gasoline on BS-VI Port Fueled SI Engine’s Combustion and Performance Characteristics”, Paper No. SEEC-063, Presented in the Seventh International Conference on Sustainable Energy and Environmental Challenges (VII-SEEC), 16th -18th December 2022, Indian Institute of Technology BHU, India.
  7. M. Krishnamoorthi and Avinash Kumar Agarwal, “Emissions Performance of A Gasoline Compression Ignition Engine At Idle And Low-Load Conditions”, Paper No. SEEC-056, Presented in the Seventh International Conference on Sustainable Energy and Environmental Challenges (VII-SEEC), 16th -18th December 2022, Indian Institute of Technology BHU, India.
  8. Shashank Shekhar and Avinash Kumar Agarwal, “Prototype Development of Methanol (MD95) Powered Compression Ignition Engine”, Paper No. SEEC-157, Presented in the Seventh International Conference on Sustainable Energy and Environmental Challenges (VII-SEEC), 16th -18th December 2022, Indian Institute of Technology BHU, India.
  9. 2021

  10. Vikram Kumar and Avinash Kumar Agarwal, “Emission Characteristics of Methanol Fuelled Genset Engine,” Paper No. SEEC-001, Presented in the Sixth International Conference on Sustainable Energy and Environmental Challenges (VI-SEEC), 27th -29th December 2021, Lucknow, India.
  11. Hardik Valera and Avinash Kumar Agarwal, “Identification of Suitable Octane Enhancer Fueling (M15 Or E15) for Two-Wheeler Segment,” Paper No. SEEC-004, Presented in the Sixth International Conference on Sustainable Energy and Environmental Challenges (VI-SEEC), 27th -29th December 2021, Lucknow, India.
  12. Utkarsha Sonawane and Avinash Kumar Agarwal, “Particulate Characterization of Gasohol Fueled Medium-Duty Spark-Ignition Engine,” Paper No. SEEC-005, Presented in the Sixth International Conference on Sustainable Energy and Environmental Challenges (VI-SEEC), 27th -29th December 2021, Lucknow, India.
  13. Ankur Kalwar and Avinash Kumar Agarwal, “Detailed Engine Characterization Study for Influence of Di-Ethyl Ether (DEE) Addition in Heavy-Duty Tractor Engine,” Paper No. SEEC-006, Presented in the Sixth International Conference on Sustainable Energy and Environmental Challenges (VI-SEEC), 27th -29th December 2021, Lucknow, India.
  14. Ayush Tripathi and Avinash Kumar Agarwal, “Experimental Investigation of Di-Methyl Ether (DME) Utilization in Genset Engine,” Paper No. SEEC-013, Presented in the Sixth International Conference on Sustainable Energy and Environmental Challenges (VI-SEEC), 27th -29th December 2021, Lucknow, India.
  15. Dhananjay Kumar and Avinash Kumar Agarwal, “3D Modeling of Co-Axial Injector for Direct Injection of Methanol in Large Bore Engine,” Paper No. SEEC-003, Presented in the Sixth International Conference on Sustainable Energy and Environmental Challenges (VI-SEEC), 27th -29th December 2021, Lucknow, India.
  16. Ashutosh Jena and Avinash Kumar Agarwal, “Numerical Investigation of Mixture Stratification and Combustion in GCI with Narrow-Angle Direct Injection (NADI),” Paper No. SEEC-007, Presented in the Sixth International Conference on Sustainable Energy and Environmental Challenges (VI-SEEC), 27th -29th December 2021, Lucknow, India.
  17. Rahul Kumar Singh, Ankur Kalwar and Avinash Kumar Agarwal, “Assessment of M15 Fueled BS-VI SI Engine for Passenger Car,” Paper No. SEEC-011, Presented in the Sixth International Conference on Sustainable Energy and Environmental Challenges (VI-SEEC), 27th -29th December 2021, Lucknow, India.
  18. Avinash Kumar Agarwal, Harsimran Singh and Krishnamoorthi M, “Potential of Bathtub Piston Geometry in reducing HC and CO Emissions from Gasoline Compression Ignition Engine,” Paper No. SEEC-012, Presented in the Sixth International Conference on Sustainable Energy and Environmental Challenges (VI-SEEC), 27th -29th December 2021, Lucknow, India.
  19. M. Krishnamoorthi and Avinash Kumar Agarwal, “Effect of Injection Strategies on Combustion and Emission Characteristics of Gasoline Compression Ignition (GCI) mode Engine,” Paper No. SEEC-002, Presented in the Sixth International Conference on Sustainable Energy and Environmental Challenges (VI-SEEC), 27th -29th December 2021, Lucknow, India.
  20. Sam Joe Chintagunti and Avinash Kumar Agarwal, “Effect of Injection Pressure and Ambient Conditions on Combustion and Emission Formation in Methanol -Diesel Dual-Fuel RCCI Conditions,” Paper No. SEEC-008, Presented in the Sixth International Conference on Sustainable Energy and Environmental Challenges (VI-SEEC), 27th -29th December 2021, Lucknow, India.
  21. Shanti Mehra and Avinash Kumar Agarwal, “Comparative Study of Macroscopic Spray Characteristics of DME and Diesel for Engine Applications,” Paper No. SEEC-010, Presented in the Sixth International Conference on Sustainable Energy and Environmental Challenges (VI-SEEC), 27th -29th December 2021, Lucknow, India.
  22. Deepak Kumar and Avinash Kumar Agarwal, “Total Cost of Ownership study of 2-wheelers and 4-wheelers in India,” Paper No. SEEC-015, Presented in the Sixth International Conference on Sustainable Energy and Environmental Challenges (VI-SEEC), 27th -29th December 2021, Lucknow, India.
  23. Krishn Chandra, Avinash K Agarwal, Oronzio Manca and Andrea Unich, “Prototype Development of Methanol-Gasoline Dual Fuel Spark Ignited Genset Engine,” Paper No. SEEC-009, Presented in the Sixth International Conference on Sustainable Energy and Environmental Challenges (VI-SEEC), 27th -29th December 2021, Lucknow, India.
  24. Aaishi Ashirbad and Avinash Kumar Agarwal, “Development of Constant Volume Combustion Chamber to study Laser-Ignited Gasoline-Direct Injection Spray,” Paper No. SEEC-014, Presented in the Sixth International Conference on Sustainable Energy and Environmental Challenges (VI-SEEC), 27th -29th December 2021, Lucknow, India.
  25. 2019

  26. Ashutosh Jena, Akhilendra Pratap Singh, Avinash Kumar Agarwal, “Combustion Analysis using Optical Diagnostics,” Paper No. SEEC-006, Presented in the Fourth International Conference on Sustainable Energy and Environmental Challenges (IV-SEEC), 27th -29th November 2019, NEERI Nagpur, India.
  27. Vishnu Singh Solanki, Avinash Kumar Agarwal, “Development and Experimental Evaluation of Gasoline Compression Ignition (GCI) Engine Technology,” Paper No. SEEC-007, Presented in the Fourth International Conference on Sustainable Energy and Environmental Challenges (IV-SEEC), 27th -29th November 2019, NEERI Nagpur, India.
  28. Dhananjay Kumar, Akhilendra Pratap Singh, Avinash Kumar Agarwal, “Particulate Matter Investigation of Different Blends of Hydrogen Enriched CNG Laser Ignited Engine,” Paper No. SEEC-008, Presented in the Fourth International Conference on Sustainable Energy and Environmental Challenges (IV-SEEC), 27th -29th November 2019, NEERI Nagpur, India.
  29. Harsimran Singh, Vishnu Singh Solanki, Utkarsha Sonawane, Avinash Kumar Agarwal, “Macroscopic And Microscopic Spray Characteristics Of Gasoline And Diesel Using CRDI System,” Paper No. SEEC-009, Presented in the Fourth International Conference on Sustainable Energy and Environmental Challenges (IV-SEEC), 27th -29th November 2019, NEERI Nagpur, India.
  30. Utkarsha Sonawane, Avinash Kumar Agarwal, “Comparison of performance, combustion and emission for Methanol, Ethanol and Butanol Fuelled Spark Ignition Engine,” Paper No. SEEC-010, Presented in the Fourth International Conference on Sustainable Energy and Environmental Challenges (IV-SEEC), 27th -29th November 2019, NEERI Nagpur, India.
  31. Vikram Kumar, Avinash Kumar Agarwal, “Performance and Emission Characteristics of a Diesel Engine Using Diesel-Alcohol Blends,” Paper No. SEEC-011, Presented in the Fourth International Conference on Sustainable Energy and Environmental Challenges (IV-SEEC), 27th -29th November 2019, NEERI Nagpur, India.
  32. Hardik Valera, Dhananjay Kumar, Avinash Kumar Agarwal, “1-D Modelling And Simulation of ALCO-251 Locomotive Engine Using GT-Power,” Paper No. SEEC-108, Presented in the Fourth International Conference on Sustainable Energy and Environmental Challenges (IV-SEEC), 27th -29th November 2019, NEERI Nagpur, India.
  33. Ankur Kalwar, Avinash Kumar Agarwal, “Combustion And Emission Characterization of Primary Alcohols In Dual-Fuel Injection Mode In Direct-Injection Spark-Ignition Engine,” Paper No. SEEC-140, Presented in the Fourth International Conference on Sustainable Energy and Environmental Challenges (IV-SEEC), 27th -29th November 2019, NEERI Nagpur, India.
  34. 2018

  35. Nikhil Sharma, Avinash Kumar Agarwal, “Optimization of Fuel Injection Timing of Gasoline Direct Injection (GDI) Engine in Homogeneous Mode of Combustion,” Paper No. SEEC-32, Presented in the Second International Conference on Sustainable Energy and Environmental Challenges, 31st December 2017- 3rd January 2018, IISC Bangalore, India.
  36. Dev Prakash Satsangi, Nachiketa Tiwari, Avinash Kumar Agarwal, “Role of Miscibility Additives on Combustion and Noise Characteristics of a Diesel Engine Fuelled with Diesel/ Methanol Blends,” Paper No. SEEC-33, Presented in the Second International Conference on Sustainable Energy and Environmental Challenges, 31st December 2017- 3rd January 2018, IISC Bangalore, India.
  37. Rajesh Kumar Prasad, Avinash Kumar Agarwal, “Effect of Spark Timing on Combustion, Performance and Emissions Parameters of SI as well as LI Single Cylinder Engine Fuelled With HCNG,” Paper No. SEEC-35, Presented in the Second International Conference on Sustainable Energy and Environmental Challenges, 31st December 2017- 3rd January 2018, IISC Bangalore, India.
  38. Chetankumar Patel, Joonsik Hwang, Krishna Chandra, Choongsik Bae, Tarun Gupta, Avinash Kumar Agarwal, “In-Cylinder Spray and Combustion Investigations in a Heavy-Duty Optical Diesel Engine Fueled With Waste Cooking Oil, Jatropha and Karanja Biodiesels,” Paper No. SEEC-36, Presented in the Second International Conference on Sustainable Energy and Environmental Challenges, 31st December 2017- 3rd January 2018, IISC Bangalore, India.
  39. Vikram Kumar, Sujeet K. Sinha, Avinash Kumar Agarwal, “Epoxy Composite Coatings for Engine Applications,” Paper No. SEEC-39, Presented in the Second International Conference on Sustainable Energy and Environmental Challenges, 31st December 2017- 3rd January 2018, IISC Bangalore, India.
  40. Prashumn Wrekkonge, Shivashish Kumar Gupta, Tushar Agarwal, Avinash Kumar Agarwal, “Development of 4-Stroke Single Cylinder Methanol Fuelled Port Fuel Injection Spark Ignition Engine,” Paper No. SEEC-110, Presented in the Second International Conference on Sustainable Energy and Environmental Challenges, 31st December 2017- 3rd January 2018, IISC Bangalore, India.
  41. Utkarsha Sonawane, Avinash Kumar Agarwal, “To Investigate Macroscopic Spay Characteristics for Methanol Blended Fuels,” Paper No. SEEC-052, Presented in the Third International Conference on Sustainable Energy and Environmental Challenges (III-SEEC), 18th - 21st December 2018, IIT Roorkee, India.
  42. Hardik Valera, Avinash Kumar Agarwal, “Effects of Spray Characteristics on Emissions From a Methanol Fuelled Spark-Ignition Engine in Indian Context,” Paper No. SEEC-116, Presented in the Third International Conference on Sustainable Energy and Environmental Challenges (III-SEEC), 18th - 21st December 2018, IIT Roorkee, India.
  43. Ashutosh Jena, Avinash Kumar Agarwal, “Effect of Inlet Air Temperature on Microscopic and Microscopic Spray Characteristics of Methanol Blend for Two-Wheeler Applications,” Paper No. SEEC-117, Presented in the Third International Conference on Sustainable Energy and Environmental Challenges (III-SEEC), 18th - 21st December 2018, IIT Roorkee, India.
  44. Vikram Kumar, Avinash Kumar Agarwal, “Optimization of Methanol Powered Diesel Engine,” Paper No. SEEC-118, Presented in the Third International Conference on Sustainable Energy and Environmental Challenges (III-SEEC), 18th - 21st December 2018, IIT Roorkee, India.
  45. Vikram Kumar, Avinash Kumar Agarwal, “Performance And Emissions Of A Methanol Fueled Genset Engine,” Paper No. SEEC-119, Presented in the Third International Conference on Sustainable Energy and Environmental Challenges (III-SEEC), 18th - 21st December 2018, IIT Roorkee, India.
  46. Ankur Kalwar, Avinash Kumar Agarwal, “Microscopic Spray Characteristics of Methanol Fuelled MPFI Engine Injector,” Paper No. SEEC-121, Presented in the Third International Conference on Sustainable Energy and Environmental Challenges (III-SEEC), 18th - 21st December 2018, IIT Roorkee, India.
  47. Sagar Srivastava, Avinash Kumar Agarwal, “Effectiveness Of Catalytic Converter In Reducing Regulated Emissions From Methanol Fuelled Medium Duty SparkIgnition Transportation Engine,” Paper No. SEEC-137, Presented in the Third International Conference on Sustainable Energy and Environmental Challenges (III-SEEC), 18th - 21st December 2018, IIT Roorkee, India.
  48. Prashumn, Avinash Kumar Agarwal, “Methyl-Ether Fuelled Direct Injection Heavy-Duty Compression Ignition Engine,” Paper No. SEEC-138, Presented in the Third International Conference on Sustainable Energy and Environmental Challenges (III-SEEC), 18th - 21st December 2018, IIT Roorkee, India.
  49. Tushar Agarwal, Avinash Kumar Agarwal, “Comparative Analysis of Performance, Regulated and Unregulated Emissions for Different Methanol-Gasoline Blends in a Single Cylinder Two-Wheeler MPFI Engine,” Paper No. SEEC-139, Presented in the Third International Conference on Sustainable Energy and Environmental Challenges (III-SEEC), 18th - 21st December 2018, IIT Roorkee, India.
  50. Vishnu Singh Solanki, Avinash Kumar Agarwal, “1-D Simulation and Modelling of Gasoline Compression Ignition (GCI) Engine,” Paper No. SEEC-140, Presented in the Third International Conference on Sustainable Energy and Environmental Challenges (III-SEEC), 18th - 21st December 2018, IIT Roorkee, India.
  51. Dhananjay Kumar, Avinash Kumar Agarwal, “1-D Modelling and Simulation of 4-Cylinder 4-Stroke SI Engine Using GT-Suite,” Paper No. SEEC-155, Presented in the Third International Conference on Sustainable Energy and Environmental Challenges (III-SEEC), 18th - 21st December 2018, IIT Roorkee, India.
  52. 2017

  53. Rajesh Prasad, Avinash Kumar Agarwal, “Development of Laser Ignited Hydrogen Fueled Supercharged Engine,” Paper No. LWA5.7, Laser Ignition Conference-2017 (LIC-2017), Novotel Bucharest City Centre Hotel, 20-23 June 2017, Bucharest, Romania.
  54. Avinash Kumar Agarwal, “Laser Ignition of Hydrogen Enriched Compressed Natural Gas (HCNG) Fueled Supercharged Engine,” Paper No. LThA3.3, Laser Ignition Conference-2017 (LIC-2017), Novotel Bucharest City Centre Hotel, 20-23 June 2017, Bucharest, Romania.
  55. Satsangi, D.P., Tiwari, N., Agarwal, A.K., Noise, vibration, and combustion inter-relationships for a compression ignition engine fuelled by ethanol-diesel Blends, Paper No. 703, 24th International Congress on Sound and Vibration, ICSV 2017, July 23-27, 2017, London.
  56. Akhiledra Pratap Singh, Avinash Kumar Agarwal, “CI/PCCI Combustion Mode Switching of Diesohol Fuelled Production Engine” SAE 2017-01-0738, Session: Partially Premixed Compression Ignition, PPCI (PFL250), SAE World Congress 2017, Detroit, USA, April 2016. (Impact Factor2019: 0.51; DOI: 10.4271/2017-01-0738; ISSN # 0148-7191).
  57. Chetankumar Patel, Nachiketa Tiwari, Avinash Kumar Agarwal, “Effects of Combustion on Noise And Vibrations in Bio-fuelled Engine” International Conference on Sustainable Energy and Environmental Challenges (SEEC-2017), 26-28 February 2017 at Center of Innovative and Applied Bioprocessing Mohali, India.
  58. Dev Prakash Satsangi, Nachiketa Tiwari, Avinash Kumar Agarwal, “Combustion and Noise Characteristics of Ethanol/ Diesel Blends in a Diesel Genset Engine” International Conference on Sustainable Energy and Environmental Challenges (SEEC-2017), 26-28 February 2017 at Center of Innovative and Applied Bioprocessing Mohali, India.
  59. Akhilendra Pratap Singh, Avinash Kumar Agarwal, “Mode Switching Strategy Development for Diesohol Fuelled Engine,” International Conference on Sustainable Energy and Environmental Challenges (SEEC-2017), 26-28 February 2017 at Center of Innovative and Applied Bioprocessing Mohali, India.
  60. Akhilendra Pratap Singh, Avinash Kumar Agarwal, “Effect of Engine Speed on In-Cylinder Air Flow Characteristics,” International Conference on Sustainable Energy and Environmental Challenges (SEEC-2017), 26-28 February 2017 at Center of Innovative and Applied Bioprocessing Mohali, India.
  61. Nikhil Sharma, Avinash Kumar Agarwal, “Spray Characteristics of GDI Injector at Varying Fuel Injection Pressures,” International Conference on Sustainable Energy and Environmental Challenges (SEEC-2017), 26-28 February 2017 at Center of Innovative and Applied Bioprocessing Mohali, India.
  62. Vikram Kumar, Sujeet K. Sinha, Avinash Kumar Agarwal, “Self-lubrication of Epoxy Composite Coatings on D2 Steel,” International Conference on Sustainable Energy and Environmental Challenges (SEEC-2017), 26-28 February 2017 at Center of Innovative and Applied Bioprocessing Mohali, India.
  63. 2016

  64. Nikhil Sharma, Chetankumar Patel, and Avinash Kumar Agarwal*, “Spray Behavior of a GDI Injector at Constant Fuel Injection Pressure and Varying Engine Load” Paper No 152, ILASS-Asia 2016, 18th Annual Conference on Liquid Atomization and Spray Systems - Asia, Chennai, India, November 2016.
  65. Chetankumar Patel, Nikhil Sharma, Nachiketa Tiwari, and Avinash Kumar Agarwal*, “Microscopic Spray Investigation of Karanja Biodiesel and Its Effects on Engine Performance and Emissions” Paper No 153, ILASS-Asia 2016, 18th Annual Conference on Liquid Atomization and Spray Systems - Asia, Chennai, India, November 2016.
  66. Suresh Gadekar, Akhilendra Pratap Singh, Avinash Kumar Agarwal, “Tomographic PIV Evaluation of In-cylinder Flow Evolution and Effect of Engine Speed” SAE 2016-01-0638, Session: Fluid flow Measurement & Analysis (PFL140), SAE World Congress 2016, Detroit, USA, April 2016. (Impact Factor2019: 0.51; DOI: 10.4271/2016-01-0638; ISSN # 0148-7191)
  67. Nikhil Sharma, Avinash Kumar Agarwal, “Microscopic and Macroscopic Spray Characteristics of GDI Injector Using Gasohol Fuels at Various Injection Pressures,” SAE 2016-01-0868, Session: Fuel Injection and Sprays (PFL320), SAE World Congress 2016, Detroit, USA, April 2016. (Impact Factor2019: 0.51; DOI: 10.4271/2016-01-0868; ISSN # 0148-7191)
  68. Jai Gopal Gupta, Avinash Kumar Agarwal, “Macroscopic and Microscopic Spray Characteristics of Diesel and Karanja Biodiesel Blends,” SAE 2016-01-0869, Session: Fuel Injection and Sprays (PFL320), SAE World Congress 2016, Detroit, USA, April 2016. (Impact Factor2019: 0.51; DOI: 10.4271/2016-01-0869; ISSN # 0148-7191)
  69. Chetankumar Patel, Nikhil Sharma, Nachiketa Tiwari, Avinash Kumar Agarwal, “Effects of Spray Droplet Size and Velocity Distributions on Gaseous Emissions from a Single Cylinder Biofuel Engine,” SAE 2016-01-0994, Session: Particle Emissions from Combustion Sources (PFL450), SAE World Congress 2016, Detroit, USA, April 2016. (Impact Factor2019: 0.51; DOI: 10.4271/2016-01-0994; ISSN # 0148-7191)
  70. Joonsik Hwang and Choongsik Bae, Chetankumar Patel, Avinash Kumar Agarwal, and Tarun Gupta, “An Experimental Investigation on Spray Characteristics of Waste Cooking Oil, Jatropha, and Karanja Biodiesels in a Constant Volume Combustion Chamber, SAE 2016-01-2263, SAE World Congress 2016, Detroit, USA, April 2016. (Impact Factor2019: 0.51; Doi:10.4271/2016-01-2263; ISSN #  0148-7191)
  71. Akhiledra Pratap Singh, Suresh Gadekar, Avinash Kumar Agarwal, “In-Cylinder Air-Flow Characteristics using Tomographic PIV at different Engine Speeds, Intake Air temperatures and Intake Valve Deactivation in a Single Cylinder Optical Research Engine,” SAE 2016-28-0001, SAE Mobility Conference 2016, Delhi, February 2016. (Impact Factor2019: 0.51; Doi:10.4271/2016-28-0001; ISSN # 0148-7191)
  72. Nikhil Sharma, Avinash Kumar Agarwal, “An Experimental Study of Microscopic Spray Characteristics of a GDI Injector Using Phase Doppler Interferometry,” SAE 2016-28-0006, SAE Mobility Conference 2016, Delhi, February 2016. (Impact Factor2019: 0.51; Doi:10.4271/2016-28-0006; ISSN # 0148-7191)
  73. Pravesh Shukla, Tarun Gupta, Avinash Kumar Agarwal, “Evaluation of Lanthanum based diesel oxidation catalyst for emission reduction with and without ceria support,” SAE 2016-28-0023, SAE Mobility Conference 2016, Delhi, February 2016. (Impact Factor2019: 0.51; Doi:10.4271/2016-28-0023; ISSN # 0148-7191)
  74. Akhiledra Pratap Singh, Avinash Kumar Agarwal, “Effect of Intake Charge Temperature and EGR on Biodiesel Fuelled HCCI Engine,” SAE 2016-28-0257, SAE Mobility Conference 2016, Delhi, February 2016. (Impact Factor2019: 0.51; Doi:10.4271/2016-28-0257; ISSN # 0148-7191).
  75. 2015

  76. Chetan kumar Patel, Nachiketa Tiwari, Avinash Kumar Agarwal, “Noise, Vibrations and Combustion Investigations of Preheated Jatropha Oil in Single Cylinder Genset Engine,” SAE 2015-01-1668, SAE World Congress 2015, April 2015, Detroit, USA. (Impact Factor2019: 0.51; DOI: 10.4271/2015-01-1668; ISSN # 0148-7191).
  77. Jai Gopal Gupta, Avinash Kumar Agarwal, “Unregulated and Regulated Emissions from Biodiesel Fuelled CRDI SUV Engine,” SAE 2015-01-0889, SAE World Congress 2015, April 2015, Detroit, USA. (Impact Factor2019: 0.51; DOI: 10.4271/2015-01-0889; ISSN # 0148-7191).
  78. Akhilendra Pratap Singh, Aditya Gupta, Avinash Kumar Agarwal, “Tomographic Particle Image Velocimetry for Flow Analysis in a Single Cylinder Optical Engine,” SAE 2015-01-0599, SAE World Congress 2015, April 2015, Detroit, USA. (Impact Factor2019: 0.51; DOI: 10.4271/2015-01-0599; ISSN # 1946-3979).
  79. 2014

  80. Vikram Kumar, Sujeet K Sinha, Avinash Kumar Agarwal, “UHMWPE–CNT/ Graphene Polymer Coatings for Boundary Lubrication on Steel Substrates,” Paper No. TSI914555, Asian Tribology Conference 2014 (ASITRIB-2014), February 2014, Agra, India.
  81. Vikram Kumar, Sujeet K Sinha, Avinash Kumar Agarwal, “Tribology of Epoxy Composites (Graphene and Graphite) Coatings on Steel in Dry and Lubricated Conditions,” Paper No. NTC-2014-532, National Tribology Conference (NTC-2014), December 2014, Bangaluru, India.
  82. Jai Gopal Gupta, Avinash Kumar Agarwal, Suresh K Aggarwal, “Particulate Emissions from Karanja Biodiesel Fuelled Turbocharged CRDI SUV Engine,” ASME ICEF 2014-5653, ASME Internal Combustion Engine Division Fall Technical Conference, (ASME-ICED FTC-2014), October 2014, Columbus, Indiana, USA. (DOI: 10.1115/ICEF2014-5653).
  83. 2013

  84. Ernst Wintner, Henrich Kofler, Dhananjay Kumar Srivastava, Avinash Kumar Agarwal, “Laser-Plasma Ignition: Status, Perspectives, Solutions,” Paper No. 9065 Proceedings of SPIE, “Fundamentals of Laser-Assisted Micro- and Nanotechnologies,” (editors: Vadim P. Veiko, Tigran A. Vartanyan), 90650B, St. Petersburg, Russian Federation, June 2013. (DOI: 10.1117/12.2053152).
  85. Atul Dhar, Avinash Kumar Agarwal, “Effect of Multiple Injections on Particulate Size-Number Distributions in a Common Rail Direct Injection Engine Fueled with Karanja Biodiesel Blends,” SAE 2013 -01-1554, SAE World Congress-2013 April 2013, Detroit, USA. (Impact Factor2019: 0.51; DOI: 10.4271/2013-01-1554; ISSN # 0148-7191).
  86. Rakesh Kumar Maurya, Avinash Kumar Agarwal, “Experimental Investigation of Close-Loop Control of HCCI Engine Using Dual Fuel Approach,” SAE 2013 -01-1675, SAE World Congress 2013, April 2013, Detroit, USA. (Impact Factor2019: 0.51; DOI: 10.4271/2013-01-1675; ISSN # 0148-7191).
  87. Dhananjay Kumar Srivastava, Avinash Kumar Agarwal, “Laser Ignition of Single Cylinder Engine and Effects of Ignition Location,” SAE 2013 -01-1631, SAE World Congress 2013, April 2013, Detroit, USA. (Impact Factor2019: 0.51; DOI: 10.4271/2013-01-1631; ISSN # 0148-7191).
  88. Anirudh Gautam, Avinash Kumar Agarwal, “Comparative Evaluation of Turbochargers for High Horse Power Diesel-Electric Locomotives,” SAE 2013 -01-0930, SAE World Congress 2013, April 2013, Detroit, USA. (Impact Factor2019: 0.51; DOI: 10.4271/2013-01-0930; ISSN # 0148-7191).
  89. 2012

  90. Akhilendra Pratap Singh, Avinash Kumar Agarwal, “An Experimental Investigation of Combustion, Emissions and Performance of a Diesel Fuelled HCCI Engine,” SAE 2012-28-0005, SAE INDIA International Mobility Conference-2012, January 2012, New Delhi, India. (Impact Factor2019: 0.51; DOI: 10.4271/2012-28-0005; ISSN # 0148-7191).
  91. Jitendra Gangwar, Tarun Gupta, Avinash Kumar Agarwal, “Comparative Study of PM Mass and Chemical Composition from Diesel and Biodiesel Fuelled CRDI SUV Engine,” SAE 2012-28-0012, SAE INDIA International Mobility Conference-2012, January 2012, New Delhi, India. (Impact Factor2019: 0.51; DOI: 10.4271/2012-28-0012; ISSN # 0148-7191).
  92. Avinash Kumar Agarwal, Vipul Chaudhury, Pravesh Chandra Shukla, “Macroscopic Spray Parameters of Karanja Oil and Blends: A Comparative Study,” SAE 2012-28-0028, SAE INDIA International Mobility Conference-2012, January 2012, New Delhi, India. (Impact Factor2019: 0.51; DOI: 10.4271/2012-28-0028; ISSN # 0148-7191).
  93. Avinash Kumar Agarwal, M Sarveshwar Reddy, Jitendra N Gangwar,Experimental Evaluation Of The Effects Of Straight Vegetable Oil, And Blends On the Deposits and Wear of the Fuel Injection Equipment,” ASME-ICEF 2012-92148, ASME Internal Combustion Engine Division Fall Technical Conference, (ASME-ICED FTC-2012, pp. 183-190, September 2012, Vancouver, Canada. (DOI: 10.1115/ICEF2012-92148).
  94. Anirudh Gautam, Prem Chandra, Kamlesh Kumar, Mani Ram Sharma, Sanjeet Kumar, Avinash Kumar Agarwal, “Development of an Electronic Fuel Injection System for a 4-Stroke Locomotive Diesel Engine,” ASME-ICEF 2012-81163, ASME Internal Combustion Engine Division Fall Technical Conference, (ASME-ICED FTC-2012, pp. 83-89, September 2012, Vancouver, Canada. (DOI: 10.1115/ICEF2012-92208; ISBN: 978-0-7918-5509-6).
  95. 2011

  96. Deepak Khurana, Avinash Kumar Agarwal, “Oxidation Stability, Engine Performance and Emissions Investigations of Karanja, Neem and Jatropha Biodiesel and Blends,” SAE 2011-01-0617, SAE World Congress-2011, April 2011, Detroit, USA. (Impact Factor2019: 0.51; DOI: 10.4271/2011-01-0617; ISSN # 1946-3952).
  97. Tarun Gupta, Neelabh Dixit, Avinash Kumar Agarwal, Sudheer Gupta, “The Secondary Organic Carbon (SOC) Formation from a CRDI Automotive Diesel Engine Exhaust,” SAE 2011-01-0642, SAE World Congress 2011, April 2011, Detroit, USA. (Impact Factor2019: 0.51; DOI: 10.4271/2011-01-0642; ISSN # 0148-7191).
  98. Avinash Kumar Agarwal, “Experimental Investigation on Intake Air Temperature and Air-Fuel Ratio Dependence of Random and Deterministic Cyclic Variability in a Homogeneous Charge Compression Ignition Engine,” SAE 2011-01-1183, SAE World Congress 2011, April 2011, Detroit, USA. (Impact Factor2019: 0.51; DOI: 10.4271/2011-01-1183; ISSN # 0148-7191).
  99. Thomas T. Kivevele, Avinash Kumar Agarwal, Tarun Gupta, Makame M. Mbarawa, “Oxidation Stability of Biodiesel Produced from Non-Edible Oils of African Origin,” SAE 2011-01-1202, SAE World Congress 2011, April 2011, Detroit, USA. (Impact Factor2019: 0.51; DOI: 10.4271/2011-01-1202; ISSN # 0148-7191).
  100. 2010

  101. Avinash Kumar Agarwal, Atul Dhar, “Performance, Emissions and Combustion Characterization of Biodiesel in a Generator Engine,” Paper No. B1-2, 5th International Conference on Innovations in Food and Bio-process Technology, December 2010, AIT, Bangkok, Thailand. (ISBN 978-974-8257-81-5)
  102. 2009

  103. Dhananjay Kumar Srivastava, Avinash Kumar Agarwal, Tarun Gupta, “Particulate Characterization of Biodiesel Fuelled Compression Ignition Engine,” SAE 2009-28-0018, SAE INDIA International Mobility Conference-2009, December 2009, Chennai, India. (Impact Factor2019: 0.51; DOI: 10.4271/2009-28-0018; ISSN # 0148-7191).
  104. Avinash Kumar Agarwal, Deepak Agarwal, “Novel Methodology to Utilise Neem (Azadirachta Indica) Oil in a Direct Injection Compression Ignition Engine: Performance and Emissions Characterization” SAE 2009-28-0039, SAE INDIA International Mobility Conference-2009, December 2009, Chennai, India. (Impact Factor2019: 0.51; DOI: 10.4271/2009-28-0039; ISSN # 0148-7191).
  105. Rakesh Kumar Maurya, Avinash Kumar Agarwal, “Experimental Investigation of Cycle-by-Cycle Variations in CAI/HCCI Combustion of Gasoline and Methanol Fuelled Engine,” International Conference on Advances in Energy Research (ICAER)-2009, December 2009, IIT Mumbai, India. (DOI: 10.4271/2009-01-1345).
  106. Avinash Kumar Agarwal, Atul Dhar, “Experimental Investigations of Engine Durability and Lubricating Oil Properties of Jatropha Oil Blends Fuelled Dl Diesel Engine,” ASME ICEF 2009-14116, ASME Internal Combustion Engine Division Fall Technical Conference, (ASME-ICED FTC-2009), pp. 137-147, September 2009, Lucerne, Switzerland.
  107. Avinash Kumar Agarwal, “Effect of Straight Vegetable Oil Utilization on Carbon Deposits and Wear of CI Engine Components,” 6th International Biofuels Conference (Winrock), March 2009, pp 81-89, New Delhi, India.
  108. Avinash Kumar Agarwal, “Scope and Limitations of Utilization of Non-Edible Straight Vegetable Oils (SVO’s) as a Substitute Fuel for Diesel Engines: An Experimental Study,” Paper No. P09-298, Petrotech 2009, New Delhi, India.
  109. Avinash Kumar Agarwal, Atul Dhar, “Performance, Emission and Combustion Characteristics of Jatropha Oil Blends in a Direct Injection CI Engine,” SAE 2009-01-0947, SAE World Congress- 2009, April 2009, Detroit, USA. (Impact Factor2019: 0.51; DOI: 10.4271/2009-01-0947; ISSN # 0148-7191).
  110. 2008

  111. Dhananjay Kumar Srivastava, Avinash Kumar Agarwal, Ernst Wintner, “Laser Ignition of Hydrogen-Air Mixture in a Combustion Bomb,” SAE 2008-28-0033, SAE INDIA International Mobility Conference-2008, pp 224-227, January 2008, New Delhi, India. (Impact Factor2019: 0.51; DOI: 10.4271/2008-28-0033; ISSN # 0148-7191).
  112. Harish Kumar Gangwar, Avinash Kumar Agarwal, “Emission and Combustion Characteristics of Vegetable Oil (Jatropha curcas) Blends in an Indirect Ignition Transportation Engine,” SAE 2008-28-0034, SAE INDIA International Mobility Conference-2008, pp 228-236, January 2008, New Delhi, India. (Impact Factor2019: 0.51; DOI: 10.4271/2008-28-0034; ISSN # 0148-7191).
  113. Rakesh Kumar Maurya, Avinash Kumar Agarwal, “Combustion and Emission Behavior of Ethanol Fuelled Homogeneous Charge Compression Ignition (HCCI) Engine,” SAE 2008-28-0064, SAE INDIA International Mobility Conference-2008, pp 440-445, January 2008, New Delhi, India. (Impact Factor2019: 0.51; DOI: 10.4271/2008-28-0064; ISSN # 0148-7191).
  114. Shailendra Sinha, Avinash Kumar Agarwal, “Ricebran Oil Biodiesel’s Performance, Emission and Endurance Test on a CIDI Transport Engine,” SAE 2008-28-0066, SAE INDIA International Mobility Conference-2008, pp 450-461, January 2008, New Delhi, India. (Impact Factor2019: 0.51; DOI: 10.4271/2008-28-0066; ISSN # 0148-7191).
  115. Atul Dhar, Avinash Kumar Agarwal, Vishal Saxena “Measurement of Lubricating Oil Film Thickness between Piston Ring –liner Interface in an Engine Simulator,” SAE 2008-28-0071, SAE INDIA International Mobility Conference-2008, pp 494-499, January 2008, New Delhi, India. (Impact Factor2019: 0.51; DOI: 10.4271/2008-28-0071; ISSN # 0148-7191).
  116. Avinash Kumar Agarwal, Dhananjay K. Srivastava, Gayatri Dwivedi, Gaurav Kawatra, M. R. Prem Kumar, Omprakash Bhardwaj, Mathew Abraham, Arun Jaura, “Field Trials of Biodiesel (B100) and Diesel Fuelled Common Rail Direct Injection Euro-III Compliant Sports Utility Vehicles in Indian Conditions,” SAE 2008-28-0077, SAE INDIA International Mobility Conference-2008, pp 537-543, January 2008, New Delhi, India. (Impact Factor2019: 0.51; DOI: 10.4271/2008-28-0077; ISSN # 0148-7191).
  117. Harish Kumar Gangwar, Avinash Kumar Agarwal, Combustion Characteristics of Jatropha Oil Blends in a Transportation Engine, SAE 2008-01-1383, SAE World Congress-2008, Detroit, USA. (Impact Factor2019: 0.51; DOI: 10.4271/2008-01-1383; ISSN # 0148-7191).
  118. Bhaskar Mazumdar, Avinash Kumar Agarwal, Performance, Emission and Combustion Characteristics of Biodiesel (Waste Cooking Oil Methyl Ester) Fueled IDI Diesel Engine, SAE 2008-01-1384, SAE World Congress-2008, Detroit, USA. (Impact Factor2019: 0.51; DOI: 10.4271/2008-01-1384; ISBN # 978-0-7680-2018-2).
  119. Shailendra Sinha, Avinash Kumar Agarwal, “Experimental Investigations of the Tribological Properties of Lubricating Oil From Biodiesel Fuelled Medium Duty Transportation CIDI Engine,” SAE 2008-01-1385, SAE World Congress-2008, Detroit, USA. (Impact Factor2019: 0.51; DOI: 10.4271/2008-01-1385; ISSN # 1946-3960).
  120. 2007

  121. Anil Kumar Kathpal, Avinash Kumar Agarwal, Anirudh Gautam, R Baskaran, “Design and Development of Double Helix Fuel Injection Pump for Four Stroke V-16 Rail Traction Diesel Engine,” ASME-ICEF 2007-1651, ASME Internal Combustion Engine Division Fall Technical Conference (ASME-ICED FTC-2007), pp. 7-20, October 2007, Charleston, USA. (DOI: 10.1115/ICEF2007-1651; ISBN # 0-7918-3819-2).
  122. Shailendra Sinha, Avinash Kumar Agarwal, “Experimental Investigation of the Effect of Biodiesel Utilization on Lubricating Oil Degradation and Wear of a Transportation CIDI Engine” ASME-ICEF 2007-1721, ASME Internal Combustion Engine Division Fall Technical Conference (ASME-ICED FTC-2007), pp. 619-630, October 2007, Charleston, SC, USA. (DOI:10.1115/1.3077659; ISBN # 0-7918-3819-2).
  123. Harish Gangwar, Avinash Kumar Agarwal, “Emission and Combustion Characteristics of Biodiesel (Jatropha Curcas) Blends in a Medium-Duty IDI transportation Engine,” ASME-ICEF 2007-1684, ASME Internal Combustion Engine Division Fall Technical Conference (ASME-ICED FTC-2007), pp. 175-183, October 2007, Charleston, SC, USA. (DOI: 10.1115/ICEF2007-1684; ISBN # 0-7918-3819-2).
  124. Shailendra Sinha, Avinash Kumar Agarwal, “Experimental investigation on Performance & Emission characteristics of Direct Injection Medium Duty Transport Diesel Engine using Rice-bran Oil Biodiesel,” ASME-ICEF 2007-1722, ASME Internal Combustion Engine Division Fall Technical Conference (ASME-ICED FTC-2007), pp. 273-284, October 2007, Charleston, SC, USA. (DOI: 10.1115/ICEF2007-1722; ISBN # 0-7918-3819-2).
  125. Avinash Kumar Agarwal, Sandeep Kumar Goyal, “Experimental and Numerical Investigations of Jet Impingement Cooling of Piston of Heavy-Duty Diesel Engine for Controlling the Non-Tail Pipe Emissions,” SAE 2007-01-0763, SAE World Congress-2007, Detroit, USA. (Impact Factor2019: 0.51; DOI: 10.4271/2007-01-0763; ISSN # 0148-7191).
  126. 2006

  127. Sandeep Kumar Goyal, Avinash Kumar Agarwal, “Experimental and Numerical Investigations of Jet Impingement Cooling of Flat Plate for Controlling the Non-Tail Pipe Emissions from Heavy-Duty Diesel Engines,” ASME-ICES 2006-1434, ASME-Internal Combustion Engines Division, Spring Technical Conference (ASME-ICED STC-2006), pp 179-186, May 2006, Aachen, Germany. (DOI: 10.1115/ICES2006-1434; ISSN # 15296598).
  128. Shailendra Sinha, Avinash Kumar Agarwal, “Combustion Characteristics of Rice Bran Oil Derived Biodiesel in a Transportation Diesel Engine,” ASME-ICES 2006-1375, ASME-Internal Combustion Engines Division, Spring Technical Conference (ASME-ICED STC-2006), pp 333-340, May 2006, Aachen, Germany. (DOI: 10.1115/ICES2006-1375; ISSN # 15296598).
  129. Mritunjay Kumar Shukla, Avinash Kumar Agarwal, Ashish Garg, “Preliminary Investigation into Comparative Performance of Titanium Based Coatings for Automotive Applications Using Biodiesel Blend and Diesel,” ASME-ICES 2006-1374, ASME-Internal Combustion Engines Division, Spring Technical Conference (ASME-ICED STC-2006), 2006, pp 727-733, May 2006, Aachen, Germany. (DOI: 10.1115/ICES2006-1374; ISSN # 15296598).
  130. Anil Kumar Kathpal, Anirudh Gautam, Avinash Kumar Agarwal, “Utilization of Biodiesel for Rail Traction on Indian Railways,” Fifth International Symposium on Fuels and Lubricants -2006 March 2006, New Delhi.
  131. 2005

  132. K V L Bharathi, Dipankar Dwivedi, Mukesh Sharma, Avinash Kumar Agarwal, “Diesel Exhaust Particulate Characterization for Poly Aromatic Hydrocarbons and Benzene Soluble Fraction,” SAE 2005-26-348, SAE India International Mobility Engineering Congress and Exposition-2005, Chennai, October 2005. (Impact Factor2019: 0.51; DOI: 10.4271/2005-26-348; ISSN # 0148-7191).
  133. Shailendra Sinha, Avinash Kumar Agarwal, “Combustion Characteristics of Rice Bran Oil Derived Biodiesel in a Transportation Diesel Engine,” SAE 2005-26-356, SAE India International Mobility Engineering Congress and Exposition-2005, Chennai, October 2005. (Impact Factor2019: 0.51; DOI: 10.4271/2005-26-354; ISSN # 0148-7191).
  134. Anirudh Gautam, Avinash Kumar Agarwal, “Matching and Optimisation of Turbochargers for Upgradation of High Horse Power Diesel Electric Locomotives for Indian Railways,” ASME-ICES 2005-1103, ASME Internal Combustion Engine Division, Spring Technical Conference (ASME-ICED STC-2005), April 2005, Chicago, USA. (DOI: 10.1115/ICES2005-1103; ISBN # 0-7918-3753-X).
  135. Shrawan Kumar Singh, Dhananjay Kumar Srivastava, Avinash Kumar Agarwal, Mukesh Sharma, “Experimental Investigation of the Effect of EGR on Wear Performance of a Compression Ignition Engine,” ASME-ICES 2005-1104, ASME Internal Combustion Engine Division, Spring Technical Conference (ASME-ICED STC-2005), April 2005, Chicago, USA. (DOI: 10.1115/ICES2005-1104; ISBN # 0-7918-3753-X)
  136. Sumit Pramanik, Avinash Kumar Agarwal, K. N. Rai, “Development Of High Strength Hydroxyapatite For Hard Tissue Replacement,” Paper No. P13, Indo-Australian Conference on Biomaterials Implantable Devices and Tissue Engineering, January 2005, Thiruvananthapuram, India.
  137. Mani Bijoy Varghese, Sandeep Kumar Goyal, Avinash Kumar Agarwal, “Numerical and Experimental Investigation of Oil Jet Cooled Piston,” SAE 2005-01-1382, SAE World Congress-2005. April 2005, Detroit, USA. (Impact Factor2019: 0.51; DOI: 10.4271/2005-01-1382; ISSN # 0148-7191).
  138. Anirudh Gautam, Avinash Kumar Agarwal, “Evaluation of Steel Cap Piston for Up-gradation of Diesel Electric Locomotives for Indian Railways,” SAE 2005-01-1645, SAE World Congress-2005. April 2005, Detroit, USA. (Impact Factor2019: 0.51; DOI: 10.4271/2005-01-1645; ISSN # 0148-7191).
  139. Shailendra Sinha, Avinash Kumar Agarwal, “Performance Evaluation of a Biodiesel (Rice Bran Oil Methyl Ester) Fuelled Transport Diesel Engine,” SAE 2005-01-1730, SAE World Congress-2005. April 2005, Detroit, USA. (Impact Factor2019: 0.51; DOI: 10.4271/2005-01-1730; ISSN # 0148-7191).
  140. 2004

  141. Shrawan Kumar Singh, Avinash Kumar Agarwal, Mukesh Sharma, “Heavy Metal And Soot Addition In Lubricating Oil Of EGR Operated Diesel Engine,” IASTA Meeting and International Conference on Aerosols, Clouds and Indian Monsoon, November 2004, IIT Kanpur, Published in IASTA Bulletin, Vol. 16(1&2), pp. 341-345, November 2004. (ISSN # 0971-4510)
  142. K V L Bharathi, Dipankar Dwivedi, Avinash Kumar Agarwal, Mukesh Sharma, “Diesel Exhaust Particulates Characterization for Heavy Metals,” IASTA Meeting and International Conference on Aerosols, Clouds and Indian Monsoon, November 2004, IIT Kanpur, Published in IASTA Bulletin, Vol. 16(1&2), pp 92-96, November 2004. (ISSN # 0971-4510)
  143. Jayashree Bijwe, Avinash Kumar Agarwal, Atul Sharma, “Assessment of Lubricity of Biodiesel Blends in Reciprocating Wear Mode,” SAE 2004-01-3068, SAE Powertrain & Fluid Systems Conference & Exhibition -2004, October 2004, Tampa, FL, USA. (Impact Factor2019: 0.51; DOI: 10.4271/2004-01-3068; ISSN # 0148-7191).
  144. Dhananjay Kumar Srivastava, Avinash Kumar Agarwal, “Experimental Investigations on the Effect of Liner Surface Properties on Wear in Non-Firing Engine Simulator” SAE 2004-01-0605, SAE World Congress, April 2004, Detroit, USA. (Impact Factor2019: 0.51; DOI: 10.4271/2004-01-0605; ISSN # 0148-7191).
  145. Mani Bijoy Varghese, Avinash Kumar Agarwal, “Numerical Investigations of Piston Cooling Using Oil Jet,” SAE 2004-28-0061, SAE India International Mobility Conference - 2004, New Delhi, India and published in “Proceedings of Third International Conference on Synergy of Fuel and Automotive Technology for a Cleaner Environment” Allied Publishers, India, pp 397-403, January 2004. (Impact Factor2019: 0.51; DOI: 10.4271/2004-28-0061; ISBN # 0-7680-1441-7; ISSN # 0148-7191).
  146. Shailendra Sinha, Avinash Kumar Agarwal, “Development and Characterization of Biodiesel from Non-edible Vegetable Oils of Indian Origin,” SAE 2004-28-0079, SAE India International Mobility Conference-2004, New Delhi, India and published in “Proceedings of Third International Conference on Synergy of Fuel and Automotive Technology for a Cleaner Environment” Allied Publishers, India, pp 513-518, January 2004. (Impact Factor2019: 0.51; DOI: 10.4271/2004-28-0079; ISBN # 0-7680-1441-7).
  147. 2003

  148. Avinash Kumar Agarwal, “Lubricating Oil Tribology Of A Biodiesel-Fuelled Compression Ignition Engine,” ASME Internal Combustion Engine Division Fall Technical Conference, (ASME-ICED FTC-2003), Salzburg, Austria, Paper No. ICES 2003-609, ICE-Vol. 40 entitled “Design and Control of Diesel and Natural Gas Engines for Industrial and Rail Transportation Applications,” Eds. N X Blythe, pp 427-442, September 2004. (DOI: 10.1115/ICES2003-0609; ISBN # 0-7918-4161-8).
  149. Sakyasingh Tripathy, Avinash Kumar Agarwal, Shailendra Sinha, Mritunjay Kumar Shukla, "Effect of EGR on the Exhaust Gas Temperature and Exhaust Opacity in an Experimental Diesel Engine,” Poster No. L090, pp. 225, 5th International Petroleum Conference and Exhibition (PETROTECH 2003), January 2003, New Delhi, India.
  150. 2002

  151. Vivek Kumar Varshney, Kumar Gaurav, Sakyasingh Tripathy, Avinash Kumar Agarwal, “Design of an Experimental EGR System for a Two Cylinder Diesel Engine,” Paper No. ISRTHMT 02-152, International Symposium on Recent Trends in Heat and Mass Transfer, January 2002, IIT Guwahati.
  152. 2001

  153. Avinash Kumar Agarwal, Jayashree Bijwe, Lalit Mohan Das, “Wear Assessment in Biodiesel Fueled Compression Ignition Engine,” ASME Internal Combustion Engine Division Spring Technical Conference, (ASME-ICED STC-2001, April 2001, Philadelphia, PA, and published in the Proceedings Vol. 1 (Ed. Victor W Wong), April 2001. (DOI: 10.1115/1.1501079; ISBN # 0-7918-1669-9).
  154. 2000

  155. Avinash Kumar Agarwal, Jayashree Bijwe, Lalit Mohan Das, “Effect of Biodiesel Utilisation on Wear of Vital Parts in Compression Ignition Engine,” ASME Internal Combustion Engine Division Fall Technical Conference, (ASME-ICED FTC-2000) September 2000, Peoria, Illinois and published in Proceedings entitled “Large Bore Engine Design, Natural Gas Engines, and Alternative Fuels- Vol. 2” (Ed. S R Bell), pp 45-54, September 2000. (DOI: 10.1115/1.1454114; ISBN # 0-7918-1896-9).
  156. Avinash Kumar Agarwal, Lalit Mohan Das, “Biodiesel Development and Characterisation for Use as a Fuel in Compression Ignition Engine,” ASME Internal Combustion Engine Division Spring Technical Conference, (ASME-ICED STC-2000), April 2000, San Antonio, TX and published in Proceedings “Alternative fuels, dimethyl ether, and natural gas engines” (Ed. V W Wong, MIT), pp 17-25, April 2000. (DOI: 10.1115/1.1364522; ISBN # 0-7918-1664-8).
  157. 1999

  158. Avinash Kumar Agarwal, S N Naik, Lalit Mohan Das, “Biodiesel Production from Non-Edible Oils and Performance Evaluation in CI Engine,” Paper No. 801, American Oil Chemists Society-Oil Technologists Association of India’s International Conference & Exhibition on Oilseeds & Vegetable Oil Processing, February 1999, New Delhi.
  159. Avinash Kumar Agarwal, Y V Raghvendra Reddy, S N Naik, “Biodiesels for C I Engines: An Obvious Choice for Next Millennium,” XII International Congress & Exhibition: R & D Vision - 21st century, New Delhi, pp 161 – 173, January 1999.
  160. Y V Raghvendra Reddy, Avinash Kumar Agarwal, Lalit Mohan Das, “Compressed Natural Gas - A Future Perspective,” XII International Congress & Exhibition: R & D Vision - 21st century, New Delhi, pp 151 – 160, January 1999.
  161. 1997

  162. Avinash Kumar Agarwal, Lalit Mohan Das, “Smoke Emission Characteristics of a Diesel Engine Using Linseed Oil Esters,” The 3rd International Conference on New Energy Systems and Conversions, Kazan, Russia, pp 239 – 242, September 1997.
  163. Lalit Mohan Das, Avinash Kumar Agarwal, “Performance and Emission Characteristics of a Diesel Engine Using Linseed Oil Esters,” World Car Conference’97, January 1997, pp 15, University of California, Riverside, USA.

    2008

  1. Dhananjay Kumar Srivastava, Avinash Kumar Agarwal, “Particulate Matter Emissions from Single Cylinder Diesel Engine: Effect of Engine Load on Size and Number Distribution,” Presented and Published in the proceedings of Technex 2008, 2nd Global Automotive Technology Conference, April 28-30, 2008, New Delhi, India.
  2. 2006

  3. Avinash Kumar Agarwal, “Alternative Fuels: Economics of Biodiesel as a Transport Fuel for Urban India,” SIAM Technex-2006 Conference “Next Paradigms in Automotive Technology; Safety, Emissions and Beyond,” February 2006, Jaipur, India.
  4. 2004

  5. Deepak Agarwal, Avinash Kumar Agarwal, “Experimental Study of Linseed Oil as Alternative Fuel for Diesel Engine,” Presented and Published in the Proceedings of National Conference on Biodiesel, held at CIAE, Bhopal, December 2004.
  6. Shailendra Sinha, Avinash Kumar Agarwal, Transesterification of vegetable oils and Utilization as a Fuel for Diesel Engine,” Presented and Published in the Proceedings of National Conference on Biodiesel, held at CIAE, Bhopal, December 2004.
  7. 2003

  8. Avinash Kumar Agarwal, Sanjeev Garg, Nitin Kaistha, Shailendra Sinha, “Transesterification of Vegetable Oils for Biodiesel Production: Engine Testing for Performance and Emissions,” presented and published in the proceedings of XVIII National Conference on I C Engines and Combustion (Eds. P S Mehta, T Sundararajan), organized by Combustion Institute (India Section), PP 571-580, December 2003, Thiruvananthapuram, pp 571-580., December 2003.
  9. Avinash Kumar Agarwal, Sanjeev Garg, “Characterisation and Utilisation of Biodiesel as an Alternative Fuels for Diesel Engines,” presented and published in the proceedings of “A National Consultative Workshop On Scientific Strategies For Production Of Non-Edible Vegetable Oils For Use As Biofuels” Policy document preparation meeting on Biodiesel Fuels by DST, Government of India, August 30-31, 2003, IISc Bangalore.
  10. Sanjeev Garg, Avinash Kumar Agarwal, “Transesterification of Vegetable oils for Biodiesel Production: Process considerations, Present Status and Future Challenges,” presented and published in the proceedings of “A National Consultative Workshop On Scientific Strategies For Production Of Non-Edible Vegetable Oils For Use As Biofuels” Policy document preparation meeting on Biodiesel Fuels by DST, Government of India, August 30-31, 2003, IISc Banglore.
  11. 1998

  12. Avinash Kumar Agarwal, “Vegetable Oil vs Diesel Fuel: Development And Use Of Biodiesels In A Compression Ignition Engine” presented and published in the proceedings of National Solar Energy Convention-98, Nov. 30-Dec. 2, 1998, Roorkee.
  13. 1996

  14. Avinash Kumar Agarwal, Dharmendra Kumawat, GD Agarwal, Yogesh Jain “Design, Fabrication & Experimentation Of Single Basin, Single Slope Solar Still” presented at ‘Seminar and Exhibition’ on Student’s project, Department of Science & Technology, Government of Rajasthan, September 1996, Jaipur.
  15. 1994

  16. Avinash Kumar Agarwal, Bharat Maheshwari “Biomass: A Renewable Source Of Energy And Fuels” Presented at National Seminar on ‘In defence of Natural Resources’ Institution of Engineers (India), September 1994, Jaipur.
  17. Avinash Kumar Agarwal “Cogeneration: A DSM Option For India” Presented and published in National Seminar on ‘In defence of Natural Resources’ Institution of Engineers (India), September 1994, Jaipur.
  1. Avinash Kumar Agarwal*, Indian Railways Electrification: Short-Sighted and Dangerous, Rail Business, pp 32-33, Vol. 9, Issue 44, May 2018. (ISSN # 0976-254X)
  2. Avinash Kumar Agarwal*, Mishrit Yatayat wale Mahanagron ke liye CNG aik swatch Urja Samadhan, Antas (IIT Kanpur Hindi Magazine) Vol. 14, pp 46-48, August 2018.
  3. Avinash Kumar Agarwal*, Atul Dhar, Experimental Investigations on Effect of Karanja Biodiesel on Engine Performance, Combustion and Durability in Collaboration with Shell Technology India Private Limited, Directions, Vol. 13(1), pp 93-99, November 2013.
  4. Avinash Kumar Agarwal*, and Anirudh Gautam, Development of an Electronic Fuel Injection System for a 4-stroke Locomotive Diesel Engine of Indian Railways, Directions, Vol.13 (1), pp 110-120, November 2013.
  5. Avinash Kumar Agarwal*, Biofuels Research at Engine Research Laboratory, Directions, Vol.9 (1), pp 49-55, December 2013.
  6. Dhananjay Kumar Srivastava, Avinash Kumar Agarwal*, Laser Fired Low Emission Futuristic Internal Combustion Engine, Directions, Vol.9 (1), pp 75-78, November 2008.
  7. Avinash Kumar Agarwal, “Electrification and Bio-energy Options in Rural India: Part II: Bio-energy options and Rural India,” India Infrastructure Report 2007 (Rural Infrastructure), 3i network, Oxford University Press, pp 165-177, 2007. (ISBN-10: 0-19-568550-4)
  8. Avinash Kumar Agarwal, “Sustainable Transport Fuels for Urban Transport,” India Infrastructure Report 2006 (Urban Infrastructure), 3i network, Oxford University Press, pp 120, 2006. (ISBN-10: 0-19-567874-5)
  9. Avinash Kumar Agarwal, “Vehicular Pollution Issues in India,” India Infrastructure Report 2006 (Urban Infrastructure), 3i network, Oxford University Press, pp 121, 2006. (ISBN-10: 0-19-567874-5)
  1. Renewable Fuels for Sustainable Mobility, 347 pages, Published by Springer, Singapore (2023), (Eds.) Pravesh Chandra Shukla, Giacomo Belgiorno, Gabriele Di Blasio, Avinash Kumar Agarwal (DOI: 10.1007/978-981-99-1392-3; ISBN # 978-981-99-1392-3)
  2. Decarbonization of Maritime Transport, 214 pages, Published by Springer, Singapore (2023), (Eds.) Burak Zincir, Pravesh Chandra Shukla, Avinash Kumar Agarwal (DOI: 10.1007/978-981-99-1677-1; ISBN 978-981-99-1677-1).
  3. Metal Nanocomposites for Energy and Environmental Applications, 525 pages, Published by Springer, Singapore (2022), (Eds.) Swatantra P. Singh, Avinash Kumar Agarwal, Kamlesh Kumar, Simant Kumar Srivastav (DOI: 10.1007/978-981-16-8599-6; ISBN # 978-981-16-8598-9).
  4. Gasoline Compression Ignition Technology: Future Prospects, 332 pages, Published by Springer, Singapore (2022), (Eds.) Gautam Kalghatgi, Avinash Kumar Agarwal, Harsh Goyal, Moez Ben Houidi (DOI: 10.1007/978-981-16-8735-8; ISBN # 978-981-16-8734-1).
  5. Application of Clean Fuels in Combustion Engines, 246 pages, Published by Springer, Singapore (2022), (Eds.) Gabriele Di Blasio, Avinash Kumar Agarwal, Giacomo Belgiorno, Pravesh Chandra Shukla (DOI: 10.1007/978-981-16-8751-8; ISBN # 978-981-16-8750-1).
  6. Clean Fuels for Mobility, 241 pages, Published by Springer, Singapore (2022), (Eds.) Gabriele Di Blasio, Avinash Kumar Agarwal, Giacomo Belgiorno, Pravesh Chandra Shukla (DOI: 10.1007/978-981-16-8747-1; ISBN # 978-981-16-8746-4).
  7. Potential and Challenges of Low Carbon Fuels for Sustainable Transport, 345 pages, Published by Springer, Singapore (2022), (Eds.) Avinash Kumar Agarwal, Hardikk Valera (DOI: 10.1007/978-981-16-8414-2; ISBN # 978-981-16-8413-5).
  8. Handbook of Thermal Management of Engines, 554 pages, Published by Springer, Singapore (2022), (Eds.) P. A. Lakshminarayanan, Avinash Kumar Agarwal (DOI: 10.1007/978-981-16-8570-5; ISBN # 978-981-16-8569-9).
  9. Engine Modeling and Simulation, 364 pages, Published by Springer, Singapore (2022), (Eds.) Avinash Kumar Agarwal, Dhananjay Kumar, Nikhil Sharma, Utkarsha Sonawane (DOI: 10.1007/978-981-16-8618-4; ISBN # 978-981-16-8617-7).
  10. Engines and Fuels for Future Transport, 393 pages, Published by Springer, Singapore (2022), (Eds.) Gautam Kalghatgi, Avinash Kumar Agarwal, Felix Leach, Kelly Senecal (DOI: 10.1007/978-981-16-8717-4; ISBN # 978-981-16-8716-7).
  11. Advanced Combustion for Sustainable Transport, 364 pages, Published by Springer, Singapore (2022), (Eds.) Avinash Kumar Agarwal, Antonio García Martínez, Ankur Kalwar, Hardikk Valera (DOI: 10.1007/978-981-16-8418-0; ISBN # 978-981-16-8417-3).
  12. New Trends in Emerging Environmental Contaminants, 615 pages, Published by Springer, Singapore (2022), (Eds.) Swatantra P. Singh, Avinash Kumar Agarwal, Tarun Gupta, Shihabudheen M. Maliyekkal (DOI: 10.1007/978-981-16-8367-1; ISBN # 978-981-16-8366-4).
  13. Greener and Scalable E-fuels for Decarbonization of Transport, 418 pages, Published by Springer, Singapore (2022), (Eds.) Avinash Kumar Agarwal, Hardikk Valera (DOI: 10.1007/978-981-16-8344-2; ISBN # 978-981-16-8343-5).
  14. Advances in Engine Tribology, 256 pages, Published by Springer, Singapore (2022), (Eds.) Vikram Kumar, Avinash Kumar Agarwal, Ashutosh Jena, Ram Krishna Upadhyay (DOI: 10.1007/978-981-16-8337-4; ISBN # 978-981-16-8336-7).
  15. Nanomaterials and Nanocomposites for Environmental Remediation, 341 pages, Published by Springer, Singapore (2021), (Eds.) Swatantra Pratap Singh, Karthik Rathinam, Tarun Gupta, Avinash Kumar Agarwal (DOI: 10.1007/978-981-16-3256-3; ISBN # 978-981-16-3256-3).
  16. Advances in Carbon Capture and Utilization, 326 pages, Published by Springer, Singapore (2021), (Eds.) Deepak Pant, Ashok Kumar Nadda, Kamal Kishore Pant, Avinash Kumar Agarwal (DOI: 10.1007/978-981-16-0638-0; ISBN # 978-981-16-0638-0).
  17. Methanol: A Sustainable Transport Fuel for SI Engines, 282 pages, Published by Springer, Singapore (2021), (Eds.) Avinash Kumar Agarwal, Hardikk Valera, Martin Pexa, Jakub Cedík (DOI: 10.1007/978-981-16-1224-4; ISBN # 978-981-16-1224-4).
  18. Novel Internal Combustion Engine Technologies for Performance Improvement and Emission Reduction, 263 pages, Published by Springer, Singapore (2021), (Eds.) Akhilendra Pratap Singh, Avinash Kumar Agarwal (DOI: 10.1007/978-981-16-1582-5; ISBN # 978-981-16-1582-5).
  19. Pollution Control Technologies: Current Status and Future Prospects, 290 pages, Published by Springer, Singapore (2021), (Eds.) Swatantra Pratap Singh, Karthik Rathinam, Tarun Gupta, Avinash Kumar Agarwal (DOI: 10.1007/978-981-16-0858-2; ISBN # 978-981-16-0858-2).
  20. Methanol: A Sustainable Transport Fuel for CI Engines, 319 pages, Published by Springer, Singapore (2021), (Eds.) Avinash Kumar Agarwal, Hardikk Valera, Martin Pexa, Jakub Cedík (DOI: 10.1007/978-981-16-1280-0; ISBN # 978-981-16-1280-0).
  21. Alternative Fuels and Advanced Combustion Techniques as Sustainable Solutions for Internal Combustion Engines, 403 pages, Published by Springer, Singapore (2021), (Eds.) Akhilendra Pratap Singh, Dhananjay Kumar, Avinash Kumar Agarwal (DOI: 10.1007/978-981-16-1513-9; ISBN # 978-981-16-1513-9).
  22. Alcohol as an Alternative Fuel for Internal Combustion Engines, 266 pages, Published by Springer, Singapore (2021), (Eds.) Pravesh Chandra Shukla, Giacomo Belgiorno, Gabriele Di Blasio, Avinash Kumar Agarwal (DOI: 10.1007/978-981-16-0931-2; ISBN # 978-981-16-0931-2).
  23. New Research Directions in Solar Energy Technologies, 438 pages, Published by Springer, Singapore (2021), (Eds.) Himanshu Tyagi, Prodyut R. Chakraborty, Satvasheel Powar, Avinash Kumar Agarwal (DOI: 10.1007/978-981-16-0594-9; ISBN # 978-981-16-0594-9).
  24. Simulations and Optical Diagnostics for Internal Combustion Engines Current Status and Way Forward, 163 pages, Published by Springer, Singapore (2020), (Eds.) Akhilendra Pratap Singh, Pravesh Chandra Shukla, Joonsik Hwang, Avinash Kumar Agarwal (DOI: 10.1007/978-981-15-0335-1; ISBN # 978-981-15-0335-1).
  25. Advanced Combustion Techniques and Engine Technologies for the Automotive Sector, 256 pages, Published by Springer, Singapore (2020), (Eds.) Akhilendra Pratap Singh, Nikhil Sharma, Ramesh Agarwal, Avinash Kumar Agarwal (DOI: 10.1007/978-981-15-0368-9; ISBN # 978-981-15-0368-9).
  26. Alternative Fuels and Their Utilization Strategies in Internal Combustion Engines, 329 pages, Published by Springer, Singapore (2020), (Eds.) Akhilendra Pratap Singh, Yogesh C. Sharma, Nirendra N. Mustafi, Avinash Kumar Agarwal (DOI: 10.1007/978-981-15-0418-1; ISBN # 978-981-15-0417-4).
  27. Solar Energy Systems, Challenges, and Opportunities, 423 pages, Published by Springer, Singapore (2020), (Eds.) Himanshu Tyagi, Prodyut Chakraborty, Satvasheel Powar, Avinash Kumar Agarwal (DOI: 10.1007/978-981-15-0675-8; ISBN # 978-981-15-0675-8).
  28. Measurement, Analysis, and Remediation of Environmental Pollutants, 474 pages, Published by Springer, Singapore (2020), (Eds.) Tarun Gupta, Swatantra Pratap Singh, Prashant Rajput, Avinash Kumar Agarwal (DOI: 10.1007/978-981-15-0540-9; ISBN # 978-981-15-0540-9).
  29. Paper Microfluidics Theory and Applications, 225 pages, Published by Springer, Singapore (2020), (Eds.) Shantanu Bhattacharya, Sanjay Kumar, Avinash Kumar Agarwal (DOI: 10.1007/978-981-15-0489-1; ISBN # 978-981-15-0489-1).
  30. Design and Development of Heavy-Duty Diesel Engines: A Handbook, 918 pages, Published by Springer, Singapore (2020), (Eds.) P. A. Lakshminarayanan, Avinash Kumar Agarwal, (DOI: 10.1007/978-981-15-0970-4; ISBN # 978-981-15-0970-4).
  31. Nano-Energetic Materials, 329 pages, Published by Springer, Singapore (2019), (Eds.) Shantanu Bhattacharya, Avinash Kumar Agarwal, T. Rajagopalan, Vinay K. Patel (DOI: 10.1007/978-981-13-3269-2; ISBN # 978-981-13-3269-2).
  32. Energy Sustainability in Built and Urban Environments, 329 pages, Published by Springer, Singapore (2019), (Eds.) Emilia Motoasca, Avinash Kumar Agarwal, Hilde Breesch (DOI: 10.1007/978-981-13-3284-5; ISBN # 978-981-13-3284-5).
  33. Two-Phase Flow for Automotive and Power Generation Sectors, 398 pages, Published by Springer, Singapore (2019), (Eds.) Kaushik Saha, Avinash Kumar Agarwal, Koushik Ghosh, Sibendu Som (DOI: 10.1007/978-981-13-3256-2; ISBN # 978-981-13-3256-2).
  34. Advances in Solar Energy Research, 592 pages, Published by Springer, Singapore (2019), (Eds.) Himanshu Tyagi, Avinash Kumar Agarwal, Prodyut R. Chakraborty, Satvasheel Powar (DOI: 10.1007/978-981-13-3302-6; ISBN # 978-981-13-3302-6).
  35. Greenhouse Gas Emissions: Challenges, Technologies, and Solutions, 178 pages, Published by Springer, Singapore (2019), (Eds.) Narasinha Shurpali, Avinash Kumar Agarwal, V. K. Srivastava (DOI: 10.1007/978-981-13-3272-2; ISBN # 978-981-13-3272-2).
  36. Methanol and the Alternate Fuel Economy, 231 pages, Published by Springer, Singapore (2019), (Eds.) Avinash Kumar Agarwal, Anirudh Gautam, Nikhil Sharma, Akhilendra Pratap Singh (DOI: 10.1007/978-981-13-3272-2; ISBN # 978-981-13-3272-2).
  37. Natural Gas Engines For Transportation and Power Generation, 419 pages, Published by Springer, Singapore (2019), (Eds.) Kalyan Kumar Srinivasan, Avinash Kumar Agarwal, Sundar Rajan Krishnan, Vincenzo Mulone (DOI: 10.1007/978-981-13-3307-1; ISBN # 978-981-13-3307-1).
  38. Sensors for Automotive and Aerospace Applications 264 pages, Published by Springer, Singapore (2019), (Eds.) Shantanu Bhattacharya, Avinash Kumar Agarwal, Om Prakash, Shailendra Singh (DOI: 10.1007/978-981-13-3290-6; ISBN # 978-981-13-3290-6).
  39. Engine Exhaust Particulates, 266 pages, Published by Springer, Singapore (2019), (Eds.) Avinash Kumar Agarwal, Atul Dhar, Nikhil Sharma, Pravesh Chandra Shukla (DOI: 10.1007/978-981-13-3299-9; ISBN # 978-981-13-3299-9). 
  40. Advanced Engine Diagnostics, 253 pages, Published by Springer, Singapore (2019), (Eds.) Avinash Kumar Agarwal, Jai Gopal Gupta, Nikhil Sharma, Akhilendra Pratap Singh (DOI: 10.1007/978-981-13-3275-3; ISBN # 978-981-13-3275-3).
  41. Pollutants from Energy Sources Characterization and Control, 346 pages, Published by Springer, Singapore (2019), (Eds.) Rashmi Avinash Agarwal, Avinash Kumar Agarwal, Tarun Gupta, Nikhil Sharma (DOI: 10.1007/978-981-13-3281-4; ISBN # 978-981-13-3281-4).
  42. Environmental Contaminants: Measurement, Modelling and Control, 431 pages, Published by Springer, Singapore (2018), (Eds.) Tarun Gupta, Avinash K Agarwal, Rashmi A Agarwal, Nitin K Labhsetwar (DOI: 10.1007/978-981-10-7332-8; ISBN # 978-981-10-7332-8).
  43. Air Pollution and Control, 260 pages, Published by Springer, Singapore (2018), (Eds.) Nikhil Sharma, Avinash K Agarwal, Peter Eastwood, Tarun Gupta, Akhilendra P Singh (DOI: 10.1007/978-981-10-7185-0; ISBN # 978-981-10-7184-3).
  44. Coal and Biomass Gasification: Recent Advances and Future Challenges, 521 pages, Published by Springer, Singapore (2018), (Eds.) Santanu De, Avinash K Agarwal, V S Moholkar, Thallada Bhaskar (DOI: 10.1007/978-981-10-7335-9; ISBN # 978-981-10-7334-2).
  45. Droplets and Sprays, 430 pages, Published by Springer, Singapore (2018), (Eds.) Saptarshi Basu, Avinash K Agarwal, Achintya Mukhopadhyay, Chetan Patel (DOI: 10.1007/978-981-10-7449-3; ISBN # 978-981-10-7448-6).
  46. Advances in Internal Combustion Engine Research, 345 pages, Published by Springer, Singapore (2018), (Eds.) Dhananjay K Srivastava, Avinash K Agarwal, Amitava Datta, Rakesh K Maurya (DOI: 10.1007/978-981-10-7575-9; ISBN # 978-981-10-7574-2).
  47. Modeling and Simulations of Turbulent Combustion, 661 pages, Published by Springer, Singapore (2018), (Eds.) Santanu De, Avinash K Agarwal, Swetoprovo Chaudhuri, Swarnendu Sen (DOI: 10.1007/978-981-10-7410-3; ISBN # 978-981-10-7409-7).
  48. Prospects of Alternative Transportation Fuels, 405 pages, Published by Springer, Singapore (2018), (Eds.) Akhilendra P Singh, Avinash K Agarwal, Rashmi A Agarwal, Atul Dhar, Mritunjay Kumar Shukla (DOI: 10.1007/978-981-10-7518-6; ISBN # 978-981-10-7517-9).
  49. Environmental, Chemical and Medical Sensors, 409 pages, Published by Springer, Singapore (2018), (Eds.) Shantanu Bhattacharya, Avinash K Agarwal, Nripen Chanda, Ashok Pandey, Ashis Kumar Sen (DOI: 10.1007/978-981-10-7751-7; ISBN # 978-981-10-7750-0).
  50. Applications of Solar Energy, 364 pages, Published by Springer, Singapore (2018), (Eds.) Himanshu Tyagi, Avinash K Agarwal, Prodyut R Chakraborty, Satvasheel Powar (DOI: 10.1007/978-981-10-7206-2; ISBN # 978-981-10-7205-5).
  51. Bioremediation: Applications for Environmental Protection and Management, 411 pages, Published by Springer, Singapore (2018), (Eds.) Sunita J Varjani, Avinash K Agarwal, Edgard Ghansounou, Baskar Gurunathan (DOI: 10.1007/978-981-10-7485-1; ISBN # 978-981-10-7484-4).
  52. Droplet and Spray Transport: Paradigms and Applications, 379 pages, Published by Springer, Singapore (2018), (Eds.) Saptarshi Basu, Avinash K Agarwal, Achintya Mukhopadhyay, Chetan Patel (DOI: 10.1007/978-981-10-7233-8; ISBN # 978-981-10-7232-1).
  53. Combustion for Power Generation and Transportation: Technology, Challenges and Prospects, 451 pages, Published by Springer, Singapore (2017), (Eds.) Avinash Kumar Agarwal, Santanu De, Ashok Pandey, Akhilendra Pratap Singh (DOI: 10.1007/978-981-10-3785-6; ISBN # 978-981-10-3784-9).
  54. Locomotives and Rail Road Transportation: Technology, Challenges, and Prospects, 247 pages, Published by Springer, Singapore (2017), (Eds.) Avinash Kumar Agarwal, Atul Dhar, Anirudh Gautam, Ashok Pandey (DOI: 10.1007/978-981-10-3788-7; ISBN # 978-981-10-3787-0).
  55. Biofuels: Technology, Challenges, and Prospects, 245 pages, Published by Springer, Singapore (2017), (Eds.) Avinash Kumar Agarwal, Rashmi Avinash Agarwal, Tarun Gupta, Bhola Ram Gurjar. (DOI: 10.1007/978-981-10-3791-7; ISBN # 978-981-10-3790-0).
  56. Technology Vision 2035: Technology Roadmap Transportation, 237 pages, (Eds.) Avinash Kumar Agarwal, S S Thipse, Akhilendra P Singh, Gautam Goswami, Mukti Prasad, Published by TIFAC, New Delhi, December 2016.
  57. Energy, Combustion, and Propulsion: New Perspectives, 609 pages, Published by Athena Academic, London, UK (2016), (Eds.) Avinash K Agarwal, Suresh K. Aggarwal, Ashwani K. Gupta, Abhijit Kushari, Ashok Pandey (ISBN 978-19-1039-029-0)
  58. Novel Combustion Concepts for Sustainable Energy Development, 562 pages, Published by Springer, Singapore (2014), (Eds.) Avinash K. Agarwal, Ashok Pandey, Ashwani K. Gupta, Suresh K. Aggarwal, Abhijit Kushari. (DOI: 10.1007/978-81-322-2211-8-18; ISBN 978-81-322-2210-1).
  59. Handbook of Combustion, 5 Volumes, 3168 pages, Hardcover, April 2010, Published by Wiley VCH, (Eds.) Maximilian Lackner, Franz Winter, Avinash K. Agarwal (ISBN # 978-3-527-32449-1).
  60. CI Engine Performance for Use with Alternative Fuels, 2009(SP-2237), 185 pages, Published by SAE International, USA, 2009, (Eds.) Amiyo K Basu, Avinash Kumar Agarwal, Paul Richards, G. J. Thompson, Scott A Miers, Sundar Rajan Krishnan (ISBN # 978-0-7680-2133-2).
  61. Combustion Science and Technology: Recent Trends Published by Narosa Publishing House, New Delhi, 2009 (Eds.) A. K. Agarwal, A. Kushari, S. K. Aggarwal, A. K. Runchal, 300 Pages (ISBN # 978-81-8487-014-5).
  62. CI Engine Performance for use with Alternative Fuels (SP-2176), Published by SAE International, USA, 2008, (Eds.) Avinash K. Agarwal, G. J. Thompson, Scott A. Miers, Sundar R. Krishnan (ISBN # 978-0-7680-2018-2).
  63. Alternative Fuels and CI Engine Performance (SP-2067), 160 Pages, Published by SAE International, USA, 2007, (Eds.) Avinash K. Agarwal, G. J. Thompson (ISBN # 978-0-7680-1857-8).
  64. New Diesel Engines and Components and CI Engine Performance for Use with Alternative Fuels (SP-2014), 171 Pages, Published by SAE International, USA, 2006, (Eds.) A. Jain, J. E. Mossberg, Avinash K. Agarwal, G. J. Thompson (ISBN #10: 0-7680-1749-1).
  65. CI Engine Performance for Use with Alternative Fuels, and New Diesel Engines and Components (SP-1978), 196 Pages, Published by SAE International, USA, 2005, (Eds.) J. E. Mossberg, A. Jain, G. J. Thompson, Avinash K. Agarwal (ISBN #0-7680-1623-1).
  1. Gautam Kalghatgi, Avinash Kumar Agarwal, Harsh Goyal, Moez Ben Houidi, “Introduction to Gasoline Compression Ignition Technology: Future Prospects,” Published in Gasoline Compression Ignition Technology: Future Prospects, Chapter 1, pp 1-6, (Editors: Gautam Kalghatgi, Avinash Kumar Agarwal, Harsh Goyal, Moez Ben Houidi), Published by Springer, Singapore, (2022), (ISBN # 978-981-16-8734-1).
  2. M. Krishnamoorthi, Avinash Kumar Agarwal, “Combustion Instabilities and Control in Compression Ignition, Low-Temperature Combustion, and Gasoline Compression Ignition Engines,” Published in Gasoline Compression Ignition Technology: Future Prospects, Chapter 7, pp 183-216, (Editors: Gautam Kalghatgi, Avinash Kumar Agarwal, Harsh Goyal, Moez Ben Houidi), Published by Springer, Singapore, (2022), (ISBN # 978-981-16-8734-1).
  3. Deepak Kumar, Amir F. N. Abdul-Manan, Gautam Kalghatgi, Avinash Kumar Agarwal, “Review of Life Cycle Analysis Studies of Less Processed Fuel for Gasoline Compression Ignition Engines,” Published in Gasoline Compression Ignition Technology: Future Prospects, Chapter 9, pp 245-273, (Editors: Gautam Kalghatgi, Avinash Kumar Agarwal, Harsh Goyal, Moez Ben Houidi), Published by Springer, Singapore, (2022), (ISBN # 978-981-16-8734-1).
  4. Harsimran Singh, Avinash Kumar Agarwal, “Reaction Mechanisms and Fuel Surrogates for Naphtha/Low Octane Fractions-Application for Gasoline Compression Ignition Engine,” Published in Gasoline Compression Ignition Technology: Future Prospects, Chapter 11, pp 301-332, (Editors: Gautam Kalghatgi, Avinash Kumar Agarwal, Harsh Goyal, Moez Ben Houidi), Published by Springer, Singapore, (2022), (ISBN # 978-981-16-8734-1).
  5. Swatantra P. Singh, Simant Kumar Srivastav, Kamlesh Kumar, Avinash Kumar Agarwal, “Metal Nanocomposites for Energy and Environmental Applications,” Published in Metal Nanocomposites for Energy and Environmental Applications, Chapter 1, pp 3-6, (Editors: Swatantra P. Singh, Avinash Kumar Agarwal, Kamlesh Kumar, Simant Kumar Srivastav), Published by Springer, Singapore, (2022), (ISBN # 978-981-16-8598-9).
  6. Gabriele Di Blasio, Avinash Kumar Agarwal, Giacomo Belgiorno, Pravesh Chandra Shukla, “Introduction to Application of Clean Fuels in Combustion Engines,” Published in Application of Clean Fuels in Combustion Engines, Chapter 1, pp 3-6, (Editors: Gabriele Di Blasio, Avinash Kumar Agarwal, Giacomo Belgiorno, Pravesh Chandra Shukla), Published by Springer, Singapore, (2022), (ISBN # 978-981-16-8750-1).
  7. Gabriele Di Blasio, Avinash Kumar Agarwal, Giacomo Belgiorno, Pravesh Chandra Shukla, “Introduction to Clean Fuels for Mobility,” Published in Clean Fuels for Mobility, Chapter 1, pp 3-7, (Editors: Gabriele Di Blasio, Avinash Kumar Agarwal, Giacomo Belgiorno, Pravesh Chandra Shukla), Published by Springer, Singapore, (2022), (ISBN # 978-981-16-8746-4).
  8. Avinash Kumar Agarwal, Hardikk Valera, “Introduction of Potential and Challenges of Low Carbon Fuels for Sustainable Transport,” Published in Potential and Challenges of Low Carbon Fuels for Sustainable Transport, Chapter 1, pp 3-6, (Editors: Avinash Kumar Agarwal, Hardikk Valera), Published by Springer, Singapore, (2022), (ISBN # 978-981-16-8413-5).
  9. Avinash Kumar Agarwal, Dhananjay Kumar, Nikhil Sharma, Utkarsha Sonawane, “Introduction to Engine Modeling and Simulation,” Published in Engine Modeling and Simulation, Chapter 1, pp 3-6, (Editors: Avinash Kumar Agarwal, Dhananjay Kumar, Nikhil Sharma, Utkarsha Sonawane), Published by Springer, Singapore, (2022), (ISBN # 978-981-16-8617-7).
  10. Utkarsha Sonawane, Avinash Kumar Agarwal, “Spray Breakup Modelling for Internal Combustion Engines,” Published in Engine Modeling and Simulation, Chapter 4, pp 57-85, (Editors: Avinash Kumar Agarwal, Dhananjay Kumar, Nikhil Sharma, Utkarsha Sonawane), Published by Springer, Singapore, (2022), (ISBN # 978-981-16-8617-7).
  11. Rahul Kumar Singh, Avinash Kumar Agarwal, “Soot and NOx Modelling for Diesel Engines,” Published in Engine Modeling and Simulation, Chapter 7, pp 195-217, (Editors: Avinash Kumar Agarwal, Dhananjay Kumar, Nikhil Sharma, Utkarsha Sonawane), Published by Springer, Singapore, (2022), (ISBN # 978-981-16-8617-7).
  12. Dhananjay Kumar, Avinash Kumar Agarwal, “Fundamentals, Evolution, and Modeling of Ignition Systems for Spark Ignition Engines,” Published in Engine Modeling and Simulation, Chapter 9, pp 237-266, (Editors: Avinash Kumar Agarwal, Dhananjay Kumar, Nikhil Sharma, Utkarsha Sonawane), Published by Springer, Singapore, (2022), (ISBN # 978-981-16-8617-7).
  13. Gautam Kalghatgi, Avinash Kumar Agarwal, Kelly Senecal, Felix Leach, “Introduction to Engines and Fuels for Future Transport,” Published in Engines and Fuels for Future Transport, Chapter 1, pp 1-5, (Editors: Gautam Kalghatgi, Avinash Kumar Agarwal, Kelly Senecal, Felix Leach), Published by Springer, Singapore, (2022), (ISBN # 978-981-16-8716-7).
  14. Avinash Kumar Agarwal, Antonio García Martínez, Ankur Kalwar, Hardikk Valera, “Introduction to Advanced Combustion for Sustainable Transport,” Published in Advanced Combustion for Sustainable Transport, Chapter 1, pp 3-6, (Editors: Avinash Kumar Agarwal, Antonio García Martínez, Ankur Kalwar, Hardikk Valera), Published by Springer, Singapore, (2022), (ISBN # 978-981-16-8417-3).
  15. Ashutosh Jena, Avinash Kumar Agarwal, “Strategical Evolution of Clean Diesel Combustion,” Published in Advanced Combustion for Sustainable Transport, Chapter 2, pp 9-42, (Editors: Avinash Kumar Agarwal, Antonio García Martínez, Ankur Kalwar, Hardikk Valera), Published by Springer, Singapore, (2022), (ISBN # 978-981-16-8417-3).
  16. Sam Joe Chintagunti, Avinash Kumar Agarwal, “Combustion in Diesel Fuelled Partially Premixed Compression Ignition Engines,” Published in Advanced Combustion for Sustainable Transport, Chapter 5, pp 141-163, (Editors: Avinash Kumar Agarwal, Antonio García Martínez, Ankur Kalwar, Hardikk Valera), Published by Springer, Singapore, (2022), (ISBN # 978-981-16-8417-3).
  17. Ankur Kalwar, Avinash Kumar Agarwal, “Optical Diagnostics for Gasoline Direct Injection Engines,” Published in Advanced Combustion for Sustainable Transport, Chapter 7, pp 201-241, (Editors: Avinash Kumar Agarwal, Antonio García Martínez, Ankur Kalwar, Hardikk Valera), Published by Springer, Singapore, (2022), (ISBN # 978-981-16-8417-3).
  18. Sulav Kafle, Ankur Kalwar, Hardikk Valera, Avinash Kumar Agarwal, “Compressed Natural Gas Utilization in Dual-Fuel Internal Combustion Engines,” Published in Advanced Combustion for Sustainable Transport, Chapter 9, pp 273-296, (Editors: Avinash Kumar Agarwal, Antonio García Martínez, Ankur Kalwar, Hardikk Valera), Published by Springer, Singapore, (2022), (ISBN # 978-981-16-8417-3).
  19. Krishn Chandra, Avinash Kumar Agarwal, Oronzio Manca, Andrea Unich, “Waste Heat Recovery Potential from Internal Combustion Engines Using Organic Rankine Cycle,” Published in Advanced Combustion for Sustainable Transport, Chapter 11, pp 331-364, (Editors: Avinash Kumar Agarwal, Antonio García Martínez, Ankur Kalwar, Hardikk Valera), Published by Springer, Singapore, (2022), (ISBN # 978-981-16-8417-3).
  20. Swatantra P. Singh, Shihabudheen M. Maliyekkal, Tarun Gupta, Avinash Kumar Agarwal , “Introduction of New Trends in Emerging Environmental Contaminants,” Published in New Trends in Emerging Environmental Contaminants, Chapter 1, pp 3-8, (Editors: Swatantra P. Singh, Shihabudheen M. Maliyekkal, Tarun Gupta, Avinash Kumar Agarwal), Published by Springer, Singapore, (2022), (ISBN # 978-981-16-8366-4).
  21. Avinash Kumar Agarwal, Hardikk Valera, “Introduction of Greener and Scalable E-Fuels for Decarbonization of Transport,” Published in Greener and Scalable E-fuels for Decarbonization of Transport , Chapter 1, pp 3-8, (Editors: Avinash Kumar Agarwal, Hardikk Valera), Published by Springer, Singapore, (2022), (ISBN # 978-981-16-8343-5).
  22. Ayush Tripathi, Suhan Park, Sungwook Park, Avinash Kumar Agarwal, “Prospects of Dual-Fuel Injection System in Compression Ignition (CI) Engines Using Di-Methyl Ether (DME),” Published in Greener and Scalable E-fuels for Decarbonization of Transport , Chapter 9, pp 223-259, (Editors: Avinash Kumar Agarwal, Hardikk Valera), Published by Springer, Singapore, (2022), (ISBN # 978-981-16-8343-5).
  23. Shanti Mehra, Avinash Kumar Agarwal, “Prospects and Challenges of DME Fueled Low-Temperature Combustion Engine Technology,” Published in Greener and Scalable E-fuels for Decarbonization of Transport, Chapter 10, pp 261-291, (Editors: Avinash Kumar Agarwal, Hardikk Valera), Published by Springer, Singapore, (2022), (ISBN # 978-981-16-8343-5).
  24. Omkar Yadav, Hardikk Valera, Avinash Kumar Agarwal, “ECU Calibration for Methanol Fuelled Spark Ignition Engines,” Published in Greener and Scalable E-fuels for Decarbonization of Transport, Chapter 12, pp 317-346, (Editors: Avinash Kumar Agarwal, Hardikk Valera), Published by Springer, Singapore, (2022), (ISBN # 978-981-16-8343-5).
  25. Aaishi Ashirbad, Avinash Kumar Agarwal, “Scope and Limitations of Ammonia as Transport Fuel,” Published in Greener and Scalable E-fuels for Decarbonization of Transport, Chapter 14, pp 391-418, (Editors: Avinash Kumar Agarwal, Hardikk Valera), Published by Springer, Singapore, (2022), (ISBN # 978-981-16-8343-5).
  26. Vikram Kumar, Avinash Kumar Agarwal, Ashutosh Jena, Ram Krishna Upadhyay, “Introduction to Advances in Engine Tribology,” Published in Advances in Engine Tribology, Chapter 1, pp 3-6, (Editors: Vikram Kumar, Avinash Kumar Agarwal, Ashutosh Jena, Ram Krishna Upadhyay), Published by Springer, Singapore, (2022), (ISBN # 978-981-16-8336-7).
  27. Vikram Kumar, Avinash Kumar Agarwal, “Friction, Wear, and Lubrication Studies of Alcohol-Fuelled Engines,” Published in Advances in Engine Tribology, Chapter 2, pp 9-29, (Editors: Vikram Kumar, Avinash Kumar Agarwal, Ashutosh Jena, Ram Krishna Upadhyay), Published by Springer, Singapore, (2022), (ISBN # 978-981-16-8336-7).
  28. Swatantra Pratap Singh, Karthik Rathinam, Tarun Gupta, Avinash Kumar Agarwal, “Nanomaterials and Nanocomposites for Environmental Remediation,” Published in Nanomaterials and Nanocomposites for Environmental Remediation, Chapter 1, pp 1-4, (Editors: Swatantra Pratap Singh, Karthik Rathinam, Tarun Gupta, Avinash Kumar Agarwal), Published by Springer, Singapore, (2021), (ISBN # 978-981-16-3256-3).
  29. Deepak Pant, Ashok Kumar Nadda, Kamal Kant Pant, Avinash Kumar Agarwal, “Advances in Carbon Capture and Utilization,” Published in Advances in Carbon Capture and Utilization, Chapter 1, pp 3-7, (Editors: Deepak Pant, Ashok Kumar Nadda, Kamal Kant Pant, Avinash Kumar Agarwal), Published by Springer, Singapore, (2021), (ISBN # 978-981-16-0638-0).
  30. Avinash Kumar Agarwal, Hardikk Valera, Martin Pexa, Jakub Cedik, “Introduction of Methanol: A Sustainable Transport Fuel for SI Engines,” Published in Methanol: A Sustainable Transport Fuel for SI Engines, Chapter 1, pp 3-7, (Editors: Avinash Kumar Agarwal, Hardikk Valera, Martin Pexa, Jakub Cedik), Published by Springer, Singapore, (2021), (ISBN # 978-981-16-1224-4).
  31. Hardikk Valera, Jakub Cedik, Martin Pexa, Avinash Kumar Agarwal, “Regulated and Unregulated Emissions from Methanol Fuelled Engines,” Published in Methanol: A Sustainable Transport Fuel for SI Engines, Chapter 7, pp 161-189, (Editors: Avinash Kumar Agarwal, Hardikk Valera, Martin Pexa, Jakub Cedik), Published by Springer, Singapore, (2021), (ISBN # 978-981-16-1224-4).
  32. Avinash Kumar Agarwal, Hardikk Valera, Martin Pexa, Jakub Cedik, “Introduction of Methanol: A Sustainable Transport Fuel for CI Engines,” Published in Methanol: A Sustainable Transport Fuel for CI Engines, Chapter 1, pp 3-7, (Editors: Avinash Kumar Agarwal, Hardikk Valera, Martin Pexa, Jakub Cedik), Published by Springer, Singapore, (2021), (ISBN # 978-981-16-1280-0).
  33. Dhananjay Kumar, Hardikk Valera, Avinash Kumar Agarwal, “Technology Options for Methanol Utilization in Large Bore Diesel Engines of Railroad Sector,” Published in Methanol: A Sustainable Transport Fuel for CI Engines, Chapter 2, pp 11-37, (Editors: Avinash Kumar Agarwal, Hardikk Valera, Martin Pexa, Jakub Cedik), Published by Springer, Singapore, (2021), (ISBN # 978-981-16-1280-0).
  34. Omkar Yadav, Hardikk Valera, Deepak Dulani, Unni Krishnan, Avinash Kumar Agarwal, “Safety Aspects of Methanol as Fuel,” Published in Methanol: A Sustainable Transport Fuel for CI Engines, Chapter 5, pp 117-138, (Editors: Avinash Kumar Agarwal, Hardikk Valera, Martin Pexa, Jakub Cedik), Published by Springer, Singapore, (2021), (ISBN # 978-981-16-1280-0).
  35. Jakub Cedik, Hardikk Valera, Martin Pexa, Avinash Kumar Agarwal, “Combustion Characteristics of Methanol Fuelled Compression Ignition Engines,” Published in Methanol: A Sustainable Transport Fuel for CI Engines, Chapter 7, pp 173-189, (Editors: Avinash Kumar Agarwal, Hardikk Valera, Martin Pexa, Jakub Cedik), Published by Springer, Singapore, (2021), (ISBN # 978-981-16-1280-0).
  36. Himanshu Tyagi, Prodyut R. Chakraborty, Satvasheel Powar, Avinash Kumar Agarwal, “Introduction to New Research Directions in Solar Energy Technologies,” Published in New Research Directions in Solar Energy Technologies, Chapter 1, pp 3-10, (Editors: Himanshu Tyagi, Prodyut R. Chakraborty, Satvasheel Powar, Avinash K. Agarwal), Published by Springer, Singapore, (2021), (ISBN # 978-981-16-0594-9).
  37. Pravesh Chandra Shukla, Giacomo Belgiorno, Gabriele Di Blasio, Avinash Kumar Agarwal, “Introduction to Alcohol as an Alternative Fuel for Internal Combustion Engines,” Published in Alcohol as an Alternative Fuel for Internal Combustion Engines, Chapter 1, pp 1-4, (Editors: Pravesh Chandra Shukla, Giacomo Belgiorno, Gabriele Di Blasio, Avinash Kumar Agarwal), Published by Springer, Singapore, (2021), (ISBN # 978-981-16-0931-2).
  38. Akhilendra Pratap Singh, Dhananjay Kumar, Avinash Kumar Agarwal, “Introduction to Alternative Fuels and Advanced Combustion Techniques as Sustainable Solutions for Internal Combustion Engines,” Published in Alternative Fuels and Advanced Combustion Techniques as Sustainable Solutions for Internal Combustion Engines, Chapter 1, pp 3-7, (Editors: Akhilendra Pratap Singh, Dhananjay Kumar, Avinash Kumar Agarwal), Published by Springer, Singapore, (2021), (ISBN # 978-981-16-1513-9).
  39. Manojit Pal, Vikram Kumar, Ankur Kalwar, Nalini Kanta Mukherjee, Avinash Kumar Agarwal, “Prospects of Fuel Injection System for Dimethyl Ether Applications in Compression Ignition Engines,” Published in Alternative Fuels and Advanced Combustion Techniques as Sustainable Solutions for Internal Combustion Engines, Chapter 2, pp 11-36, (Editors: Akhilendra Pratap Singh, Dhananjay Kumar, Avinash Kumar Agarwal), Published by Springer, Singapore, (2021), (ISBN # 978-981-16-1513-9).
  40. Vikram Kumar, Avinash Kumar Agarwal, “Material Compatibility, Technical Challenges and Modifications Required for DME Adaptation in Compression Ignition Engines,” Published in Alternative Fuels and Advanced Combustion Techniques as Sustainable Solutions for Internal Combustion Engines, Chapter 3, pp 37-57, (Editors: Akhilendra Pratap Singh, Dhananjay Kumar, Avinash Kumar Agarwal), Published by Springer, Singapore, (2021), (ISBN # 978-981-16-1513-9).
  41. Ankur Kalwar, Avinash Kumar Agarwal, “Lean-Burn Combustion in Direct-Injection Spark-Ignition Engines,” Published in Alternative Fuels and Advanced Combustion Techniques as Sustainable Solutions for Internal Combustion Engines, Chapter 12, pp 281-317, (Editors: Akhilendra Pratap Singh, Dhananjay Kumar, Avinash Kumar Agarwal), Published by Springer, Singapore, (2021), (ISBN # 978-981-16-1513-9).
  42. Harsimran Singh, Utkarsha Sonawane, Ashutosh Jena, Avinash Kumar Agarwal, “Potential of Gasoline Compression Ignition Combustion for Heavy-Duty Applications in Internal Combustion Engines,” Published in Alternative Fuels and Advanced Combustion Techniques as Sustainable Solutions for Internal Combustion Engines, Chapter 13, pp 319-346, (Editors: Akhilendra Pratap Singh, Dhananjay Kumar, Avinash Kumar Agarwal), Published by Springer, Singapore, (2021), (ISBN # 978-981-16-1513-9).
  43. Swatantra Pratap Singh, Karthik Rathinam, Tarun Gupta, Avinash Kumar Agarwal, “Pollution Control Technologies: Current Status and Future Prospects,” Published in Pollution Control Technologies: Current Status and Future Prospects, Chapter 1, pp 1-5, (Editors: Swatantra Pratap Singh, Karthik Rathinam, Tarun Gupta, Avinash Kumar Agarwal), Published by Springer, Singapore, (2021), (ISBN # 978-981-16-0858-2).
  44. Akhilendra Pratap Singh, Avinash Kumar Agarwal, “Introduction to Novel Internal Combustion Engine Technologies for Performance Improvement and Emission Reduction,” Published in Novel Internal Combustion Engine Technologies for Performance Improvement and Emission Reduction, Chapter 1, pp 3-6, (Editors: Akhilendra Pratap Singh, Avinash Kumar Agarwal), Published by Springer, Singapore, (2021), (ISBN # 978-981-16-1582-5).
  45. Tushar Kakkar, Ashutosh Jena, Avinash Kumar Agarwal, “Application of Laser-Induced Fluorescence Technique in Internal Combustion Engine Investigations,” Published in Novel Internal Combustion Engine Technologies for Performance Improvement and Emission Reduction, Chapter 2, pp 9-42, (Editors: Akhilendra Pratap Singh, Avinash Kumar Agarwal), Published by Springer, Singapore, (2021), (ISBN # 978-981-16-1582-5).
  46. Ashutosh Jena, Akhilendra Pratap Singh, Avinash Kumar Agarwal, “Challenges and Opportunities of Particle Imaging Velocimetry as a Tool for Internal Combustion Engine Diagnostics” Published in Novel Internal Combustion Engine Technologies for Performance Improvement and Emission Reduction, Chapter 3, pp 43-77, (Editors: Akhilendra Pratap Singh, Avinash Kumar Agarwal), Published by Springer, Singapore, (2021), (ISBN # 978-981-16-1582-5).
  47. Akash Rai, Dhananjay Kumar, Utkarsha Sonawane, Avinash Kumar Agarwal, “Dimethyl Ether Spray Characteristics for Compression Ignition Engines” Published in Novel Internal Combustion Engine Technologies for Performance Improvement and Emission Reduction, Chapter 4, pp 79-103, (Editors: Akhilendra Pratap Singh, Avinash Kumar Agarwal), Published by Springer, Singapore, (2021), (ISBN # 978-981-16-1582-5).
  48. Sam Joe Chintagunti, Ankur Kalwar, Dhananjay Kumar, Avinash Kumar Agarwal, “Spray Chamber Designs and Optical Techniques for Fundamental Spray Investigations” Published in Novel Internal Combustion Engine Technologies for Performance Improvement and Emission Reduction, Chapter 5, pp 105-144, (Editors: Akhilendra Pratap Singh, Avinash Kumar Agarwal), Published by Springer, Singapore, (2021), (ISBN # 978-981-16-1582-5).
  49. Sulav Kafle, Hardikk Valera, Avinash Kumar Agarwal, “Evolution of Catalytic Converters for Spark Ignition Engines to Control Emissions” Published in Novel Internal Combustion Engine Technologies for Performance Improvement and Emission Reduction, Chapter 7, pp 175-196, (Editors: Akhilendra Pratap Singh, Avinash Kumar Agarwal), Published by Springer, Singapore, (2021), (ISBN # 978-981-16-1582-5).
  50. Utkarsha Sonawane, Avinash Kumar Agarwal, “Engine Emission Control Devices for Particulate Matter and Oxides of Nitrogen: Challenges and Emerging Trends” Published in Novel Internal Combustion Engine Technologies for Performance Improvement and Emission Reduction, Chapter 8, pp 197-220, (Editors: Akhilendra Pratap Singh, Avinash Kumar Agarwal), Published by Springer, Singapore, (2021), (ISBN # 978-981-16-1582-5).
  51. Akhilendra Pratap Singh, Pravesh Chandra Shukla, Joonsik Hwang, Avinash Kumar Agarwal, “Introduction to Combustion Simulations and Optical Diagnostic Techniques for Internal Combustion Engines,” Published in Simulations and Optical Diagnostics for Internal Combustion Engines, Chapter 1, pp 3-6, (Editors: Akhilendra Pratap Singh, Pravesh Chandra Shukla, Joonsik Hwang, Avinash Kumar Agarwal), Published by Springer, Singapore, (2020), (ISBN # 978-981-15-0335-1).
  52. Hardikk Valera, Dhananjay Kumar, Akhilendra Pratap Singh, Avinash Kumar Agarwal, “Modelling Aspects for Adaptation of Alternative Fuels in IC Engines,” Published in Simulations and Optical Diagnostics for Internal Combustion Engines, Chapter 2, pp 9-26, (Editors: Akhilendra Pratap Singh, Pravesh Chandra Shukla, Joonsik Hwang, Avinash Kumar Agarwal), Published by Springer, Singapore, (2020), (ISBN # 978-981-15-0335-1).
  53. Dhananjay Kumar, Avinash Kumar Agarwal, “Laser Ignition Technology for Gaseous Fuelled Automotive Engines,” Published in Simulations and Optical Diagnostics for Internal Combustion Engines, Chapter 10, pp 143-163, (Editors: Akhilendra Pratap Singh, Pravesh Chandra Shukla, Joonsik Hwang, Avinash Kumar Agarwal), Published by Springer, Singapore, (2020), (ISBN # 978-981-15-0335-1).
  54. Akhilendra Pratap Singh, Nikhil Sharma, Ramesh Agarwal, Avinash Kumar Agarwal, “Introduction to Advanced Combustion Techniques and Engine Technologies for Automotive Sector,” Published in Advanced Combustion Techniques and Engine Technologies for the Automotive Sector, Chapter 1, pp 3-6, (Editors: Akhilendra Pratap Singh, Nikhil Sharma, Ramesh Agarwal, Avinash Kumar Agarwal), Published by Springer, Singapore, (2020), (ISBN # 978-981-15-0368-9).
  55. Tushar Agarwal, Akhilendra Pratap Singh, Avinash Kumar Agarwal, “Development of Methanol Fuelled Two-Wheeler for Sustainable Mobility,” Published in Advanced Combustion Techniques and Engine Technologies for the Automotive Sector, Chapter 2, pp 9-36, (Editors: Akhilendra Pratap Singh, Nikhil Sharma, Ramesh Agarwal, Avinash Kumar Agarwal), Published by Springer, Singapore, (2020), (ISBN # 978-981-15-0368-9).
  56. Vikram Kumar, Avinash Kumar Agarwal, “Material Compatibility Aspects and Development of Methanol-Fueled Engines,” Published in Advanced Combustion Techniques and Engine Technologies for the Automotive Sector, Chapter 3, pp 37-51, (Editors: Akhilendra Pratap Singh, Nikhil Sharma, Ramesh Agarwal, Avinash Kumar Agarwal), Published by Springer, Singapore, (2020), (ISBN # 978-981-15-0368-9).
  57. Hardikk Valera, Akhilendra Pratap Singh, Avinash Kumar Agarwal, “Prospects of Methanol-Fuelled Carburetted Two Wheelers in Developing Countries,” Published in Advanced Combustion Techniques and Engine Technologies for the Automotive Sector, Chapter 4, pp 53-73, (Editors: Akhilendra Pratap Singh, Nikhil Sharma, Ramesh Agarwal, Avinash Kumar Agarwal), Published by Springer, Singapore, (2020), (ISBN # 978-981-15-0368-9).
  58. Vishnu Singh Solanki, Nirendra Nath Mustafi, Avinash Kumar Agarwal, “Prospects of Gasoline Compression Ignition (GCI) Engine Technology in Transport Sector,” Published in Advanced Combustion Techniques and Engine Technologies for the Automotive Sector, Chapter 5, pp 77-110, (Editors: Akhilendra Pratap Singh, Nikhil Sharma, Ramesh Agarwal, Avinash Kumar Agarwal), Published by Springer, Singapore, (2020), (ISBN # 978-981-15-0368-9).
  59. Ankur Kalwar, Avinash Kumar Agarwal, “Overview, Advancements, and Challenges in Gasoline Direct Injection Engine Technology,” Published in Advanced Combustion Techniques and Engine Technologies for the Automotive Sector, Chapter 6, pp 111-147, (Editors: Akhilendra Pratap Singh, Nikhil Sharma, Ramesh Agarwal, Avinash Kumar Agarwal), Published by Springer, Singapore, (2020), (ISBN # 978-981-15-0368-9).
  60. Akhilendra Pratap Singh, Nirendra N. Mustafi, Yogesh C. Sharma, Avinash Kumar Agarwal, “Introduction to Alternative Fuels and Their Utilization Strategies in Internal Combustion Engines,” Published in Alternative Fuels and Their Utilization Strategies in Internal Combustion Engines, Chapter 1, pp 3-6, (Editors: Akhilendra Pratap Singh, Yogesh C. Sharma, Nirendra N. Mustafi, Avinash Kumar Agarwal), Published by Springer, Singapore, (2020), (ISBN # 978-981-15-0417-4).
  61. Hardikk Valera, Avinash Kumar Agarwal, “Future Automotive Powertrains for India: Methanol Versus Electric Vehicles,” Published in Alternative Fuels and Their Utilization Strategies in Internal Combustion Engines, Chapter 7, pp 89-123, (Editors: Akhilendra Pratap Singh, Yogesh C. Sharma, Nirendra N. Mustafi, Avinash Kumar Agarwal), Published by Springer, Singapore, (2020), (ISBN # 978-981-15-0417-4).
  62. Nirendra N. Mustafi, Avinash Kumar Agarwal, “Combustion and Emission Characteristics, and Emission Control of CNG Fueled Vehicles,” Published in Alternative Fuels and Their Utilization Strategies in Internal Combustion Engines, Chapter 12, pp 201-228, (Editors: Akhilendra Pratap Singh, Yogesh C. Sharma, Nirendra N. Mustafi, Avinash Kumar Agarwal), Published by Springer, Singapore, (2020), (ISBN # 978-981-15-0417-4).
  63. Nirendra N. Mustafi, Avinash Kumar Agarwal, “Biogas for Transport Sector: Current Status, Barriers, and Path Forward for Large-Scale Adaptation,” Published in Alternative Fuels and Their Utilization Strategies in Internal Combustion Engines, Chapter 13, pp 229-271, (Editors: Akhilendra Pratap Singh, Yogesh C. Sharma, Nirendra N. Mustafi, Avinash Kumar Agarwal), Published by Springer, Singapore, (2020), (ISBN # 978-981-15-0417-4).
  64. Himanshu Tyagi, Prodyut R. Chakraborty, Satvasheel Powar, Avinash Kumar Agarwal, “Introduction to Solar Energy: Systems, Challenges, and Opportunities,” Published in Solar Energy, Chapter 1, pp 3-12, (Editors: Himanshu Tyagi, Prodyut Chakraborty, Satvasheel Powar, Avinash Kumar Agarwal), Published by Springer, Singapore, (2020), (ISBN # 978-981-15-0675-8).
  65. Tarun Gupta, Swatantra Pratap Singh, Prashant Rajput, Avinash Kumar Agarwal, “Introduction of Measurement, Analysis, and Remediation of Environmental Pollutants,” Published in Measurement, Analysis and Remediation of Environmental Pollutants, Chapter 1, pp 1-5, (Editors: Tarun Gupta, Swatantra Pratap Singh, Prashant Rajput, Avinash Kumar Agarwal), Published by Springer, Singapore, (2020), (ISBN # 978-981-15-0540-9).
  66. Shantanu Bhattacharya, Sanjay Kumar, Avinash Kumar Agarwal, “A Historical Perspective on Paper Microfluidic Based Point-of-Care Diagnostics,” Published in Paper Microfluidics Theory and Applications, Chapter 1, pp 1-5, (Editors: Shantanu Bhattacharya, Sanjay Kumar, Avinash Kumar Agarwal), Published by Springer, Singapore, (2020), (ISBN # 978-981-15-0489-1).
  67. Avinash Kumar Agarwal, Anirudh Gautam, Nikhil Sharma, Akhilendra Pratap Singh, “Introduction of Methanol and Alternate Fuel Economy,” Published in Methanol and the Alternate Fuel Economy, Chapter 2, pp 3-6, (Editors: Avinash Kumar Agarwal, Anirudh Gautam, Nikhil Sharma, Akhilendra Pratap Singh), Published by Springer, Singapore, (2019), (ISBN # 978-981-13-3287-6).
  68. Hardikk Valera, Avinash Kumar Agarwal, “Methanol as an Alternative Fuel for Diesel Engines,” Published in  Methanol and the Alternate Fuel Economy, Chapter 2, pp 9-33, (Editors: Avinash Kumar Agarwal, Anirudh Gautam, Nikhil Sharma, Akhilendra Pratap Singh), Published by Springer, Singapore, (2019), (ISBN # 978-981-13-3287-6).
  69. Anirudh Gautam, Vagish Kumar Mishra, Avinash Kumar Agarwal, “Improving Efficiency of Diesel Traction and Adoption of Liquid Sunshine for Indian Railways,” Published in  Methanol and the Alternate Fuel Economy, Chapter 3, pp 35-64, (Editors: Avinash Kumar Agarwal, Anirudh Gautam, Nikhil Sharma, Akhilendra Pratap Singh), Published by Springer, Singapore, (2019), (ISBN # 978-981-13-3287-6).
  70. Rajesh Kumar Prasad, Avinash Kumar Agarwal, “Laser-Ignited Engine Development for Adaptation to Hydrogen-Enriched Compressed Natural Gas (HCNG),” Published in  Methanol and the Alternate Fuel Economy, Chapter 9, pp 185-211, (Editors: Avinash Kumar Agarwal, Anirudh Gautam, Nikhil Sharma, Akhilendra Pratap Singh), Published by Springer, Singapore, (2019), (ISBN # 978-981-13-3287-6).
  71. Dev Prakash Satsangi, Avinash Kumar Agarwal, “Particulate Matter and Its Impact on Human Health in Urban Settings,” Published in  Methanol and the Alternate Fuel Economy, Chapter 10, pp 213-231, (Editors: Avinash Kumar Agarwal, Anirudh Gautam, Nikhil Sharma, Akhilendra Pratap Singh), Published by Springer, Singapore, (2019), (ISBN # 978-981-13-3287-6).
  72. Shantanu Bhattacharya, Avinash Kumar Agarwal, Vinay K. Patel, T. Raja Gopalan, Aviru Kumar Basu, Anubhuti Saha, “Introduction to Nano-energetic Materials,” Published in  Nano-Energetic Materials, Chapter 2, pp 3-7, (Editors: Shantanu Bhattacharya, Avinash Kumar Agarwal, T. Rajagopalan, Vinay K. Patel), Published by Springer, Singapore, (2019), (ISBN # 978-981-13-3269-2).
  73. Kaushik Saha, Avinash Kumar Agarwal, Koushik Ghosh, Sibendu Som, “Introduction: Two-Phase Flow for Automotive and Power Generation Sectors,” Published in  Two-Phase Flow for Automotive and Power Generation Sectors, Chapter 1, pp 1-5, (Editors: Kaushik Saha, Avinash  Kumar Agarwal, Koushik Ghosh, Sibendu Som), Published by Springer, Singapore, (2019), (ISBN # 978-981-13-3256-2).
  74. Chetankumar Patel, Joonsik Hwang, Avinash Kumar Agarwal, Choongsik Bae, “Characterization of Biodiesel Sprays,” Published in  Two-Phase Flow for Automotive and Power Generation Sectors, Chapter 8, pp 203-219, (Editors: Kaushik Saha, Avinash  Kumar Agarwal, Koushik Ghosh, Sibendu Som), Published by Springer, Singapore, (2019), (ISBN # 978-981-13-3256-2).
  75. Himanshu Tyagi, Avinash Kumar Agarwal, Prodyut R. Chakraborty, Satvasheel Powar, “Introduction to Advances in Solar Energy Research,” Published in  Advances in Solar Energy Research, Chapter 1, pp 3-11, (Editors: Himanshu Tyagi, Avinash Kumar Agarwal, Prodyut R. Chakraborty, Satvasheel Powar), Published by Springer, Singapore, (2019), (ISBN # 978-981-13-3302-6).
  76. Narasinha Shurpali, Avinash Kumar Agarwal, V.K. Srivastava, “Introduction to Greenhouse Gas Emissions,” Published in  Greenhouse Gas Emissions, Chapter 1, pp 1-5, (Editors: Narasinha Shurpali, Avinash Kumar Agarwal, VK Srivastava), Published by Springer, Singapore, (2019), (ISBN # 978-981-13-3272-2).
  77. Kalyan Kumar Srinivasan, Avinash Kumar Agarwal, Sundar Rajan Krishnan, Vincenzo Mulone, “Introduction to Advanced Combustion Technologies: The Role of Natural Gas in Future Transportation and Power Generation Systems,” Published in  Natural Gas Engines, Chapter 1, pp 1-6, (Editors: Kalyan Kumar Srinivasan, Avinash Kumar Agarwal, Sundar Rajan Krishnan, Vincenzo Mulone), Published by Springer, Singapore, (2019), (ISBN # 978-981-13-3307-1).
  78. Rajesh Kumar Prasad, Tanmay Kar, Avinash Kumar Agarwal, “Prospects and Challenges for Deploying Direct Injection Technology for Compressed Natural Gas Engines,” Published in  Natural Gas Engines, Chapter 5, pp 117-141, (Editors: Kalyan Kumar Srinivasan, Avinash Kumar Agarwal, Sundar Rajan Krishnan, Vincenzo Mulone), Published by Springer, Singapore, (2019), (ISBN # 978-981-13-3307-1).
  79. Shantanu Bhattacharya, Avinash Kumar Agarwal, Om Prakash, Shailendra Singh, Mohit Pandey, Rishi Kant, “Introduction to Sensors for Aerospace and Automotive Applications,” Published in  Sensors for Automotive and Aerospace Applications, Chapter 1, pp 1-6, (Editors: Shantanu Bhattacharya, Avinash Kumar Agarwal, Om Prakash, Shailendra Singh), Published by Springer, Singapore, (2019), (ISBN # 978-981-13-3290-6).
  80. Avinash Kumar Agarwal, Atul Dhar, Nikhil Sharma, Pravesh Chandra Shukla, “Introduction to Engine Exhaust Particulates,” Published in  Engine Exhaust Particulates, Chapter 1, pp 3-6, (Editors: Avinash Kumar Agarwal, Atul Dhar, Nikhil Sharma, Pravesh Chandra Shukla), Published by Springer, Singapore, (2019), (ISBN # 978-981-13-3299-9).
  81. Joonsik Hwang, Felix Sebastian Hirner, Choongsik Bae, Chetankumar Patel, Tarun Gupta, Avinash Kumar Agarwal, “Image-Based Flame Temperature and Soot Analysis of Biofuel Spray Combustion,” Published in  Engine Exhaust Particulates, Chapter 3, pp 41-54, (Editors: Avinash Kumar Agarwal, Atul Dhar, Nikhil Sharma, Pravesh Chandra Shukla), Published by Springer, Singapore, (2019), (ISBN # 978-981-13-3299-9).
  82. Nikhil Sharma, Avinash Kumar Agarwal, “Technological Evolution of Spark Ignition Direct Injection Engine,” Published in Engine Exhaust Particulates, Chapter 8, pp 165-180, (Editors: Avinash Kumar Agarwal, Atul Dhar, Nikhil Sharma, Pravesh Chandra Shukla), Published by Springer, Singapore, (2019), (ISBN # 978-981-13-3299-9).
  83. Avinash Kumar Agarwal, Jai Gopal Gupta, Nikhil Sharma, Akhilendra Pratap Singh, “Introduction to Advanced Engine Diagnostics,” Published in  Advanced Engine Diagnostics, Chapter 1, pp 3-6, (Editors: Avinash Kumar Agarwal, Jai Gopal Gupta, Nikhil Sharma, Akhilendra Pratap Singh), Published by Springer, Singapore, (2019), (ISBN # 978-981-13-3275-3).
  84. Akhilendra Pratap Singh, Nikhil Sharma, Dev Prakash Satsangi, Vikram Kumar, Avinash Kumar Agarwal, “Reactivity-Controlled Compression Ignition Combustion Using Alcohols,” Published in  Advanced Engine Diagnostics, Chapter 2, pp 9-28, (Editors: Avinash Kumar Agarwal, Jai Gopal Gupta, Nikhil Sharma, Akhilendra Pratap Singh), Published by Springer, Singapore, (2019), (ISBN # 978-981-13-3275-3).
  85. Akhilendra Pratap Singh, Avinash Kumar Agarwal, “Characteristics of Particulates Emitted by IC Engines Using Advanced Combustion Strategies,” Published in  Advanced Engine Diagnostics, Chapter 4, pp 55-71, (Editors: Avinash Kumar Agarwal, Jai Gopal Gupta, Nikhil Sharma, Akhilendra Pratap Singh), Published by Springer, Singapore, (2019), (ISBN # 978-981-13-3275-3).
  86. Vikram Kumar, Sujeet Kumar Sinha, Avinash Kumar Agarwal, “Tribological Studies of an Internal Combustion Engine,” Published in  Advanced Engine Diagnostics, Chapter 12, pp 237-253, (Editors: Avinash Kumar Agarwal, Jai Gopal Gupta, Nikhil Sharma, Akhilendra Pratap Singh), Published by Springer, Singapore, (2019), (ISBN # 978-981-13-3275-3).
  87. Rashmi Avinash Agarwal, Avinash Kumar Agarwal, Tarun Gupta, Nikhil Sharma, “Introduction to Pollutants from Energy Sources: Characterization and Control,” Published in  Pollutants from Energy Sources, Chapter 1, pp 3-6, (Editors: Rashmi Avinash Agarwal, Avinash Kumar Agarwal, Tarun Gupta, Nikhil Sharma), Published by Springer, Singapore, (2019), (ISBN # 978-981-13-3281-4).
  88. Dhananjay Kumar Srivastava, Avinash Kumar Agarwal*, Rakesh Kumar Maurya, and Amitava Datta, “Horizons in Internal Combustion Research,” Published in Advances in Internal Combustion Engine Research, Chapter 1, pp. 3-6, (Editors: Dhananjay Kumar Srivastava, Avinash Kumar Agarwal, Amitava Datta, and Rakesh Kumar Maurya), Published by Springer, Singapore (2018), (ISBN # 978-981-10-7574-2).
  89. Akhilendra Pratap Singh and Avinash Kumar Agarwal*, “Low-Temperature Combustion: An Advanced Technology for Internal Combustion Engines,” Published in Advances in Internal Combustion Engine Research, Chapter 2, pp. 9-41, (Editors: Dhananjay Kumar Srivastava, Avinash Kumar Agarwal, Amitava Datta, and Rakesh Kumar Maurya), Published by Springer, Singapore, (2018). (ISBN # 978-981-10-7574-2).
  90. Sadaraboina Moses Vidya Sagar and Avinash Kumar Agarwal*, “Hydrogen-Enriched Compressed Natural Gas: An Alternate Fuel for IC Engines,” Published in  Advances in Internal Combustion Engine Research, Chapter 6, pp. 111-134, (Editors: Dhananjay Kumar Srivastava, Avinash Kumar Agarwal, Amitava Datta, and Rakesh Kumar Maurya), Published by Springer, Singapore, (2018), (ISBN # 978-981-10-7574-2)
  91. Tadveer Singh Hora, Akhilendra Pratap Singh, and Avinash Kumar Agarwal*, “Future Mobility Solutions of Indian Automotive Industry: BS-VI, Hybrid, and Electric Vehicles,” Published in Advances in Internal Combustion Engine Research, Chapter 14, pp, 309-345, (Editors: Dhananjay Kumar Srivastava, Avinash Kumar Agarwal, Amitava Datta, and Rakesh Kumar Maurya), Published by Springer, Singapore, (2018), (ISBN # 978-981-10-7574-2).
  92. Nikhil Sharma, Avinash Kumar Agarwal*, Peter Eastwood, Tarun Gupta, and Akhilendra Pratap Singh, “Introduction to Air Pollution and Its Control,” Published in Air Pollution and Control, Chapter 1, pp. 3-7, (Editors: Nikhil Sharma, Avinash Kumar Agarwal. Eastwood, Tarun Gupta, and Akhilendra P. Singh), Published by Springer, Singapore, (2018), (ISBN # 978-981-10-7184-3).
  93. Joonsik Hwang, Choongsik Bae, Chetankumar Patel, Tarun Gupta, and Avinash Kumar Agarwal*, “Biodiesel Soot Characteristics,” Published in Air Pollution and Control, Chapter 3, pp. 45-55, (Editors: Nikhil Sharma, Avinash Kumar Agarwal. Eastwood, Tarun Gupta, and Akhilendra P. Singh), Published by Springer, Singapore, (2018), (ISBN 978-981-10-7184-3).
  94. Pravesh Chandra Shukla, Tarun Gupta, and Avinash Kumar Agarwal*, “Techniques to Control Emissions from a Diesel Engine,” Published in Air Pollution and Control, Chapter 4, pp. 57-72, (Editors: Nikhil Sharma, Avinash Kumar Agarwal. Eastwood, Tarun Gupta, and Akhilendra P. Singh), Published by Springer, Singapore, (2018), (ISBN # 978-981-10-7184-3).
  95. Nikhil Sharma and Avinash Kumar Agarwal*, “Gasoline Direct Injection Engines and Particulate Emissions,” Published in Air Pollution and Control, Chapter 6, pp. 87-105, (Editors: Nikhil Sharma, Avinash Kumar Agarwal. Eastwood, Tarun Gupta, and Akhilendra P. Singh), Published by Springer, Singapore, (2018), (ISBN # 978-981-10-7184-3).
  96. Himanshu Tyagi, Avinash Kumar Agarwal*, Prodyut Ranjan Chakraborty, and Satvasheel Powar, “Introduction to Applications of Solar Energy,” Published in Applications of Solar Energy, Chapter 1, pp. 3-10, (Editors: Himanshu Tyagi, Avinash Kumar Agarwal, Prodyut R. Chakraborty, and Satvasheel Powar), Published by Springer, Singapore, (2018), (ISBN # 978-981-10-7205-5).
  97. Saptarshi Basu, Avinash Kumar Agarwal*, Achintya Mukhopadhyay, and Chetankumar Patel, “Introduction to Application Paradigms of Droplets and Spray Transport,” Published in Applications Paradigms of Droplet and Spray Transport: Paradigms and Applications, Chapter 1, pp. 3-6, (Editors: Saptarshi Basu, Avinash Kumar Agarwal, Achintya Mukhopadhyay, Chetankumar Patel), Published by Springer, Singapore, (2018), (ISBN # 978-981-10-7232-1).
  98. Sunita J. Varjani, Avinash Kumar Agarwal*, Edgard Gnansounou, and Baskar Gurunathan, “Introduction to Environmental Protection and Management,” Published in Bioremediation: Applications for Environmental Protection and Management, Chapter 1, pp. 1-6, (Editors: Sunita J. Varjani, Avinash Kumar Agarwal, Edgard Gnansounou, and Baskar Gurunathan), Published by Springer, Singapore, (2018), (ISBN # 978-981-10-7484-4).
  99. Saptarshi Basu, Avinash Kumar Agarwal*, Achintya Mukhopadhyay, and Chetankumar Patel, “Introduction to Droplets and Sprays: Applications for Combustion and Propulsion,” Published in Droplets and Sprays, Chapter 1, pp. 3-6, (Editors: Saptarshi Basu, Avinash Kumar Agarwal, Achintya Mukhopadhyay, Chetankumar Patel), Published by Springer, Singapore, (2018), (ISBN # 978-981-10-7448-6).
  100. Shantanu Bhattacharya, Avinash Kumar Agarwal*, Nripen Chanda, Ashok Pandey, Ashis Kumar Sen, Sanjay Kumar, and Poonam Sundriyal, “Introduction to Environmental, Chemical, and Medical Sensors,” Published in  Environmental, Chemical, and Medical Sensors, Chapter 1, pp. 3-6, (Editors: Shantanu Bhattacharya, Avinash Kumar Agarwal, Nripen Chanda, Ashok Pandey Ashis Kumar Sen), Published by Springer, Singapore, (2018), (ISBN # 978-981-10-7750-0).
  101. Akhilendra Pratap Singh, Avinash Kumar Agarwal, Rashmi Avinash Agarwal, Atul Dhar, and Mritunjay Kumar Shukla, “Introduction of Alternative Fuels,” Published in Prospects of Alternative Transportation Fuels, Chapter 1, pp. 3-6, (Editors: Akhilendra P. Singh, Rashmi Avinash Agarwal Avinash Kumar Agarwal, Atul Dhar, Mritunjay Kumar Shukla), Published by Springer, Singapore (2018), (ISBN # 978-981-10-7517-9).
  102. Akhilendra Pratap Singh, Atul Dhar, and Avinash Kumar Agarwal*, "Evolving Energy Scenario: Role and Scope for Alternative Fuels in Transport Sector." Published in Prospects of Alternative Transportation Fuels, Chapter 2, pp. 7-19, (Editors: Akhilendra P. Singh, Rashmi Avinash Agarwal Avinash Kumar Agarwal, Atul Dhar, Mritunjay Kumar Shukla), Published by Springer, Singapore (2018), (ISBN # 978-981-10-7517-9).
  103. Anuj Pal and Avinash Kumar Agarwal*, "Hydrogen for Internal Combustion Engines." Published in Prospects of Alternative Transportation Fuels, Chapter 4, pp. 39-54, (Editors: Akhilendra P. Singh, Rashmi Avinash Agarwal Avinash Kumar Agarwal, Atul Dhar, Mritunjay Kumar Shukla), Published by Springer, Singapore (2018), (ISBN # 978-981-10-7517-9).
  104. Tadveer Singh Hora and Avinash Kumar Agarwal*, "Compressed Natural Gas and Hythane for On-road Passenger and Commercial Vehicles." Published in Prospects of Alternative Transportation Fuels, Chapter 6, pp. 79-106, (Editors: Akhilendra P. Singh, Rashmi Avinash Agarwal Avinash Kumar Agarwal, Atul Dhar, Mritunjay Kumar Shukla), Published by Springer, Singapore (2018), (ISBN# 978-981-10-7517-9).
  105. Dev Prakash Satsangi, Nachiketa Tiwari, and Avinash Kumar Agarwal*, "Alcohols for Fueling Internal Combustion Engines." Published in Prospects of Alternative Transportation Fuels, Chapter 7, pp. 109-129, (Editors: Akhilendra P. Singh, Rashmi Avinash Agarwal Avinash Kumar Agarwal, Atul Dhar, Mritunjay Kumar Shukla), Published by Springer, Singapore (2018), (ISBN# 978-981-10-7517-9).
  106. Akhilendra Pratap Singh, and Avinash Kumar Agarwal*, "Utilization of Alternative Fuels in Advanced Combustion Technologies." Published in Prospects of Alternative Transportation Fuels, Chapter 15, pp. 359-385, (Editors: Akhilendra P. Singh, Rashmi Avinash Agarwal Avinash Kumar Agarwal, Atul Dhar, Mritunjay Kumar Shukla), Published by Springer, Singapore (2018), (ISBN# 978-981-10-7517-9).
  107. Avinash Kumar Agarwal*, Santanu De, Ashok Pandey, Akhilendra Pratap Singh, “Introduction to Combustion for Power Generation and Transportation,” Published in Combustion for Power Generation and Transportation: Technology, Challenges, and Prospects, Chapter 1, pp. 3-8, (Editors: Avinash Kumar Agarwal, Santanu De, Ashok Pandey, Akhilendra Pratap Singh), Published by Springer, Singapore (2017), (ISBN # 978-981-10-3784-9)
  108. Avinash Kumar Agarwal*, Akhilendra Pratap Singh, “Lasers and Optical Diagnostics for Next Generation IC Engine Development: Ushering New Era of Engine Development,” Published in Combustion for Power Generation and Transportation: Technology, Challenges, and Prospects, Chapter 11, pp. 211-259, (Editors: Avinash Kumar Agarwal, Santanu De, Ashok Pandey, Akhilendra Pratap Singh), Published by Springer, Singapore (2017), (ISBN # 978-981-10-3784-9)
  109. Avinash Kumar Agarwal*, Atul Dhar, Anirudh Gautam, Ashok Pandey, “Introduction to the Locomotives and Rail Road Transportation,” Published in Locomotives and Rail Road Transportation: Technology, Challenges, and Prospects, Chapter 1, pp. 3-8, (Editors: Avinash Kumar Agarwal, Atul Dhar, Anirudh Gautam, Ashok Pandey), Published by Springer, Singapore (2017), (ISBN # 978-981-10-3787-0)
  110. Joydeep Dutta, Avinash Kumar Agarwal, “Diesel Locomotives of Indian Railways: A Technical History,” Published in Locomotives and Rail Road Transportation: Technology, Challenges, and Prospects, Chapter 2, pp. 9-23, (Editors: Avinash Kumar Agarwal, Atul Dhar, Anirudh Gautam, Ashok Pandey), Published by Springer, Singapore (2017), (ISBN # 978-981-10-3787-0)
  111. Anirudh Gautam, Ravindra Nath Misra, Avinash Kumar Agarwal*, “Biodiesel as an Alternate Fuel for Diesel Traction on Indian Railways,” Published in Locomotives and Rail Road Transportation: Technology, Challenges, and Prospects, Chapter 5, pp. 73-113, (Editors: Avinash Kumar Agarwal, Atul Dhar, Anirudh Gautam, Ashok Pandey), Published by Springer, Singapore (2017), (ISBN # 978-981-10-3787-0)
  112. Avinash Kumar Agarwal*, Nikhil Sharma, Akhilendra Pratap Singh, “Potential of DME and Methanol for Locomotive Traction in India: Opportunities, Technology Options, and Challenges,” Published in Locomotives and Rail Road Transportation: Technology, Challenges, and Prospects, Chapter 7, pp. 131-153, (Editors: Avinash Kumar Agarwal, Atul Dhar, Anirudh Gautam, Ashok Pandey), Published by Springer, Singapore (2017), (ISBN # 978-981-10-3787-0)
  113. Sunit K. Singh, Rohini Khobragade, Govindachetty Saravanan, Avinash Kumar Agarwal, Ahmed S. AL-Fatesh, Nitin K. Labhasetwar, “Catalytic Control Options for Diesel Particulate Emissions Including that from Locomotive Engines,” Published in Locomotives and Rail Road Transportation: Technology, Challenges, and Prospects, Chapter 9, pp. 171-194, (Editors: Avinash Kumar Agarwal, Atul Dhar, Anirudh Gautam, Ashok Pandey), Published by Springer, Singapore (2017), (ISBN # 978-981-10-3787-0)
  114. Avinash Kumar Agarwal*, Rashmi Avinash Agarwal, Tarun Gupta, Bhola Ram Gurjar, “Introduction to Biofuels,” Published in Biofuels: Technology, Challenges and Prospects, Chapter 1, pp. 3-6, (Editors: Avinash Kumar Agarwal, Rashmi Avinash Agarwal, Tarun Gupta, Bhola Ram Gurjar), Published by Springer, Singapore (2017). DOI: 10-1007/978-981-10-3791-7 (ISBN # 978-981-10-3790-0)
  115. Sukrat S. Thipse, Avinash Kumar Agarwal*, Akhilendra Pratap Singh, “Intermodal, ITS and I&M Issues,” Chapter 2, pp. 45-51, Published in Technology Vision 2035: Technology Roadmap Transportation, (Editors: Avinash Kumar Agarwal, S S Thipse, Akhilendra P Singh, Gautam Goswami, Mukti Prasad), Published by TIFAC, New Delhi, December 2016.
  116. Sukrat S. Thipse, Avinash Kumar Agarwal*, Akhilendra Pratap Singh, “Safety and Security Issues,” Chapter 3, pp. 52-61, Published in Technology Vision 2035: Technology Roadmap Transportation, (Editors: Avinash Kumar Agarwal, S S Thipse, Akhilendra P Singh, Gautam Goswami, Mukti Prasad), Published by TIFAC, New Delhi, December 2016.
  117. Avinash Kumar Agarwal*, Akhilendra Pratap Singh, Sukrat S. Thipse, “Energy, Environment, Emissions and Noise Issues,” Chapter 4, pp. 62-83, Published in Technology Vision 2035: Technology Roadmap Transportation, (Editors: Avinash Kumar Agarwal, S S Thipse, Akhilendra P Singh, Gautam Goswami, Mukti Prasad), Published by TIFAC, New Delhi, December 2016.
  118. Avinash Kumar Agarwal*, Akhilendra Pratap Singh, Sukrat S. Thipse, “Vehicle Technology Issues,” Chapter 5, pp. 84-99, Published in Technology Vision 2035: Technology Roadmap Transportation, (Editors: Avinash Kumar Agarwal, S S Thipse, Akhilendra P Singh, Gautam Goswami, Mukti Prasad), Published by TIFAC, New Delhi, December 2016.
  119. Sukrat S. Thipse, Avinash Kumar Agarwal*, Akhilendra Pratap Singh, “Materials and Recycling Issues,” Chapter 6, pp. 100-105, Published in Technology Vision 2035: Technology Roadmap Transportation, (Editors: Avinash Kumar Agarwal, S S Thipse, Akhilendra P Singh, Gautam Goswami, Mukti Prasad), Published by TIFAC, New Delhi, December 2016.
  120. Avinash Kumar Agarwal*, Akhilendra Pratap Singh*, Sukrat S. Thipse, “Blue Sky Perspective,” Chapter 7, pp. 106-113, Published in Technology Vision 2035: Technology Roadmap Transportation, (Editors: Avinash Kumar Agarwal, S S Thipse, Akhilendra P Singh, Gautam Goswami, Mukti Prasad), Published by TIFAC, New Delhi, December 2016.
  121. Avinash Kumar Agarwal*, Akhilendra Pratap Singh, Sukrat S. Thipse, “Conclusions and Recommendations,” Chapter 8, pp. 114-127, Published in Technology Vision 2035: Technology Roadmap Transportation, (Editors: Avinash Kumar Agarwal, S S Thipse, Akhilendra P Singh, Gautam Goswami, Mukti Prasad), Published by TIFAC, New Delhi, December 2016.
  122. Avinash Kumar Agarwal*, Nikhil Sharma, Life-Time Contributions of Prof. L.M. Das to Hydrogen Engine Research and Development, Published in Energy, Combustion and Propulsion: New Perspectives, Chapter 2, pp 31-72, (Editors: Avinash K Agarwal, Suresh K. Aggarwal, Ashwani K. Gupta, Abhijit Kushari, Ashok Pandey) Published by Athena Academic, London, UK (2016), (ISBN 978-19-1039-029-0)
  123. Avinash Kumar Agarwal*, Jai Gopal Gupta, “Effect of Biodiesel Utilization on Tribological Properties of Lubricating Oil in a Compression Ignition Engine,” Published in Novel Combustion Concepts for Sustainable Energy Development, Chapter 5, pp 75-87 (Editors: Avinash K. Agarwal, Ashok Pandey, Ashwani K. Gupta, Suresh K. Aggarwal, Abhijit Kushari). Springer, Singapore (2014). DOI 10.1007/978-81-322-2211-8-18 (ISBN 978-81-322-2210-1)
  124. Tarun Gupta, Avinash Kumar Agarwal, Pravesh Chandra Shukla, “Comparison of Primary and Secondary Emissions from an Internal Combustion Engine,” Published in Novel Combustion Concepts for Sustainable Energy Development, Chapter 18, pp 415-432 (Editors: Avinash K. Agarwal, Ashok Pandey, Ashwani K. Gupta, Suresh K. Aggarwal, Abhijit Kushari). Springer, Singapore (2014). DOI 10.1007/978-81-322-2211-8-18 (ISBN 978-81-322-2210-1)
  125. Avinash Kumar Agarwal*, Atul Dhar, “Performance, Emission and Combustion Characteristics of Preheated and Blended Jatropha Oil,” Published in Jatropha, Challenges for a New Energy Crop, Vol. 1, Farming, Economics and Biofuel, Chapter 26, pp 491-508 (Editors: N. Carels, M. Sujatha, B Bahadur), Springer Science, New York, (2012). (ISBN # 978-1-4614-4805-1)
  126. Tarun Gupta, Avinash Kumar Agarwal, “Toxicology of Combustion Products,” published in Handbook of Combustion, Vol. 1, Wiley-VCH Verlag (2010).
  127. Avinash Kumar Agarwal*, Chapter 2 on “Biofuels,” in the Book entitled “Waste to Wealth,” Second edition, (Eds.) Banwari Lal, M R V P Reddy, published by Tata Energy Research Institute, Delhi, Chapter 2, pp 29-88, 2005. (ISBN #81-7993-067-X)
  128. Pawan Ghildiyal, Avinash Kumar Agarwal*, Chapter 5 on “Review of Commercial Biodiesel Production Technology,” in the book entitled “Biofuels in India: A New Revolution,” First edition (Eds.) I B Saravanan, E Naveen Kumar, published by The ICFAI University Press, Hyderabad, India, pp 79-101, 2007. (ISBN # 81-314—893-0).
  129. Avinash Kumar Agarwal*, Chapter 8 on “Biodiesel as an Alternative Urban Transport Fuel in India,” in the book entitled “Biofuels in India: A New Revolution,” First edition (Eds.) I B Saravanan, E Naveen Kumar, published by The ICFAI University Press, Hyderabad, India, pp 151-157, 2007. (ISBN # 81-314—893-0).
  1. September 2018-Present: HAG Scale-Professor of Mechanical Engineering at Indian Institute of Technology, Kanpur.
  2. October 2015: Visiting Professor, KAIST, Daejeon, South Korea.
  3. July 2014: Visiting Professor, Hanyang University, Seoul, South Korea.
  4. June 2013: Visiting Professor, Hanyang University, Seoul, South Korea.
  5. July 2013: Visiting Professor, Photonics Institute, Technical University of Vienna, Austria.
  6. June 2012: Visiting Professor, Hanyang University, Seoul, South Korea.
  7. March 2012- August 2018: Professor of Mechanical Engineering at Indian Institute of Technology, Kanpur.
  8. May-June 2010: Visiting Professor, Tshwane University of Technology, Pretoria, South Africa.
  9. December 2007-March 2012: Associate Professor of Mechanical Engineering at Indian Institute of Technology, Kanpur.
  10. March 2001- December 2007: Assistant Professor of Mechanical Engineering at Indian Institute of Technology, Kanpur.
  11. June 2004: (One Month) Visiting Professor, Photonics Institute, Technical University of Vienna, Austria.
  12. May 2002- July 2002: (Three Months) Visiting Professor to Wolfson School of Mechanical and Manufacturing Engineering, University of Loughborough, UK.
  13. August 1999- February 2001: Post-Doctoral Research Fellow at Engine Research Center, University of Wisconsin, Madison, USA. The project involved developing an experimental test rig, micro sensors, such as capacitance probes, fibre optic probes, miniaturized pressure transducers, etc. These sensors are employed inside the diesel engine combustion chamber to study lubricating oil consumption. The project was funded by US Army, Cummins Engines, and Lubrizol Corporation.
  14. July 1995- August 1999: Research Assistant, Center for Energy Studies, IIT Delhi.
  15. May 1995- July 1995: Graduate Engineer Trainee at Mahindra & Mahindra Ltd, Bombay.
  16. May 1993- July 1993: Vocational training at BHEL, Hardwar on various turbines, thermal power station, design and manufacturing of ‘SWATI’ aircraft.
  17. July 1992- July 1992: Vocational training at Jaipur Dairy on process plant, air-conditioning plant, and boiler.
  18. May 1992- June 1992: Vocational training at BHEL, Hardwar on manufacturing turbines and turbine blades.
  1. Period:2023

    Organization:Coordinator of LEADS (Leadership in Science) Program of the Indian National Science Academy (INSA) and National Center for Good Governance (NCGG)

    Nature of Responsibility:Coordinator Responsible for Organizing the Program in India (12-18 July 2023)

    Designation:Chairman, Organizing Committee

  2. Period:2023-24

    Organization:Departmental Faculty Advisory Committee (DFAC), Mechanical Engineering, IITK

    Nature of Responsibility:Recruitment and Promotions of Faculty for Mechanical Engineering

    Designation:Member

  3. Period:2020

    Organization:Coordinator of LEAP (Leadership in Academics) Program of Ministry of Education (MoE) under Pandit Madan Mohan Malviya National Mission on Teachers and Teaching (PMMMNMTT)

    Nature of Responsibility:Coordinator Responsible for Organizing the Program in India (Feb-March 2021) and Foreign (June 2022) Legs

    Designation:Chairman, Organizing Committee

  4. Period:6/2018-11/2020

    Organization:IITK Research and Technology Park

    Nature of Responsibility:Founder Director & Coordinator

    Designation:Professor-in Charge

  5. Period:2017

    Organization:Project Vishwajeet at IIT Kanpur

    Nature of Responsibility:Energy Theme Coordinator

    Designation:Coordinator

  6. Period:2015-16

    Organization:Departmental Faculty Advisory Committee (DFAC), Mechanical Engineering, IITK

    Nature of Responsibility:Recruitment and Promotions of Faculty for Mechanical Engineering

    Designation:Member

  7. Period:2014-16

    Organization:IIT Kanpur Global Ranking Committee

    Nature of Responsibility:Suggest strategies to improve IITK’s global ranking.

    Designation:Member

  8. Period:2013-15

    Organization:Fluid and Thermal Sciences

    Nature of Responsibility:Coordination of FTS Stream

    Designation:Stream Convener

  9. Period:2012-13

    Organization:Senate Election Committee

    Nature of Responsibility:Conducting various Senate elections

    Designation:Chairman

  10. Period:2011-15

    Organization:SAE, IIT Kanpur

    Nature of Responsibility:Advising SAE Club

    Designation:Faculty Advisor

  11. Period:2010-11

    Organization:IITK Golden Jubilee Celebration Committee

    Nature of Responsibility:Member

    Designation:Member

  12. Period:2008-10

    Organization:Institute R&D Committee (IRDC)

    Nature of Responsibility:Representing Mech. Engg. Department in IRDC

    Designation:Member

  13. Period:17-18, 07-09, 05-06

    Organization:Departmental Post Graduate Committee, Mech. Engg.

    Nature of Responsibility:Member

    Designation:Member

  14. Period:2006-07

    Organization:Institute Security Advisory Board, IIT Kanpur

    Nature of Responsibility:Advising IITK on security-related matters

    Designation:Member

  15. Period:2007-08

    Organization:Institute Energy Conservation Committee, IIT Kanpur

    Nature of Responsibility:Advising IITK on energy conservation

    Designation:Member

  16. Period:2005-08

    Organization:Hall of Residence 2, IIT Kanpur

    Nature of Responsibility:Warden

    Designation:Warden

  17. Period:2005-07

    Organization:Institute Works Department, IIT Kanpur

    Nature of Responsibility:Member, IWD Advisory Board

    Designation:Member

  18. Period:2002-06
    2007-08

    Organization:Program Post-Graduate Committee,
    Environmental Engineering Program,
    Civil Engineering Department, IIT Kanpur

    Nature of Responsibility:External Member

    Designation:Member

  19. Period:2006-07

    Organization:Program Post-Graduate Committee,
    Environmental Engineering Program,
    Civil Engineering Department, IIT Kanpur

    Nature of Responsibility:Coordinating the Master’s Program of Environmental Engineering and Management

    Designation:Chairman

  20. Period:2002-04

    Organization:Energy Conversion Laboratory,
    Mechanical Engineering Department, IIT Kanpur

    Nature of Responsibility:Coordinating Various Laboratory Development & Routine Activities

    Designation:Coordinator

  21. Period:2005 onwards

    Organization:Engine Research Laboratory,
    Mechanical Engineering Department, IIT Kanpur

    Nature of Responsibility:Developing the Lab and Research Activities related to engines

    Designation:Laboratory Incharge

  22. Period:2002-04

    Organization:Transport Users Committee, IIT Kanpur

    Nature of Responsibility:The interface between Transport Users & the Administration

    Designation:Chairman

  23. Period:2001-02

    Organization:Association of Mechanical Engineers,
    Dept. of Mechanical Engineering, IIT Kanpur

    Nature of Responsibility:Coordinating Departmental Cultural and Professional Association

    Designation:Faculty Advisor

PhDs (Completed)

  1. Shailendra Sinha, “Biodiesel Development, Characterization, Performance, Emission & Wear Investigations on a Medium-Duty Transportation CI Engine,” IIT Kanpur, February 2008. (Presently: Professor, Institute of Engineering and Technology, Lucknow)
  2. Rakesh Kumar Maurya, “Performance, Emission, Combustion Characterization and Close-Loop Control of HCCI Engine Employing Gasoline Like Fuels,” IIT Kanpur, December 2012. (Presently: Associate Professor, Department of Mechanical Engineering, Indian Institute of Technology, Ropar, Punjab)
  3. Anirudh Gautam, “Experimental Investigations of Comparative Performance, Emission, and Combustion Characteristics of Biodiesel-Fueled Four-Cycle and Two-Cycle Locomotive Diesel Engines,” IIT Kanpur, June 2013. (Presently: Principal Executive Director, Urban Transport and High-Speed Directorate, Research Designs & Standards Organisation, Ministry of Railways, Lucknow)
  4. Dhananjay Kumar Shrivastava, “Experimental Investigations of Laser Ignition of Natural Gas-Air Mixtures for Engine Applications,” IIT Kanpur, June 2013. (Presently: Assistant Professor, Department of Mechanical Engineering, Indian Institute of Technology Kharagpur, Kharagpur, W.B.)
  5. Atul Dhar, “Combustion, Performance, Emissions, Durability and Lubricating Oil Tribology Investigations of Biodiesel (Karanja) Fuelled Compression Ignition Engine,” IIT Kanpur, June 2013. (Presently: Chairperson and Associate Professor, School of Engineering, Indian Institute of Technology Mandi, Mandi, Himachal Pradesh-175075)
  6. Pravesh Chandra Shukla, “Diesel Emissions Characterization and Control Using Non-Noble Metal-based Diesel Oxidation Catalysts (DOCs),” IIT Kanpur, February 2016 (Co-Supervisor: Dr Tarun Gupta). (Presently: Assistant Professor, Department of Mechanical Engineering, Indian Institute of Technology Bhilai)
  7. Jaigopal Gupta, “Combustion, Material Compatibility, and Engine Tribology Investigations in a Karanja Biodiesel Fuelled Turbocharged Diesel Engine,” IIT Kanpur, July 2016. (Presently: Assistant Professor and Head, Department of Mechanical Engineering, Government Women Engineering College Ajmer, Ajmer-305001, Rajasthan)
  8. Chetan Patel, “Spray, Engine Combustion, Performance, Emissions, Vibrations and Acoustics Studies of Biodiesel and SVO Blends,” IIT Kanpur, December 2016. (Co-Supervisor: Dr Nachiketa Tiwari) (Post-Doctoral Fellow, University of Orleans. France: Presently: Associate Professor, Department of Mechanical Engineering, Sitarambhai Naranji Patel Institute of Technology and Research Center, Umrakh, Vidyabharti Campus, Bardoli-394601, Gujarat)
  9. Akhilendra Pratap Singh, “Mode Switching Prototype Engine Development for Low-Temperature Combustion,” IIT Kanpur, January 2017. (Presently: Assistant Professor, Department of Mechanical Engineering, Indian Institute of Technology (BHU), Varanasi)
  10. Nikhil Sharma, “Spray, Combustion, Emissions and Particulate Investigations of a Gasohol Fuelled Gasoline Direct Injection Engine,” IIT Kanpur, November 2017. (Post-Doctoral Fellow, Chalmers University, Sweden Presently: Assistant Professor, Department of Mechanical Engineering, Malviya National Institute of Technology, Jaipur, Rajasthan)
  11. Dev Prakash Satsangi, “Acoustics, Vibrations, Performance, Combustion & Emissions Characterization of Diesohol Fuelled Single Cylinder Compression Ignition Engine,” IIT Kanpur, May 2018. (Co-Supervisor: Dr Nachiketa Tiwari) (Presently: Assistant Professor, Engg. College, Dwarhat, UK)
  12. Vikram Kumar, “Enhancement of Tribological Properties of Epoxy Composite Coatings for Engine Applications,” IIT Kanpur, April 2018. (Co-Supervisor: Dr Sujeet Sinha, IIT Delhi). (Presently: Senior Research Engineer, IIT Kanpur)
  13. Rajesh Kumar Prasad, “Laser-Plasma Ignited Hydrogen Enriched Compressed Natural Gas Engine Development and Experimental Evaluation,” IIT Kanpur, July 2019. (Presently: Assistant Professor, Faculty of Science and Technology, ICFAI University, Jharkhand, Ranchi)
  14. Krishn Chandra, “Prototype Development of Spark Ignited Genset Engine Fuelled with Methanol-Gasoline Blends,” Università degli Studi della Campania "Luigi Vanvitelli,” Aversa (CE) 81031, Italy, June 2022 (Co-Supervisors: Prof. Oronzio Manca, Prof. Andrea Unich, Department of Engineering, University of Campania Luigi Vanvitelli, Italy). (Presently: Post-Doctoral Fellow, University of Campania Luigi Vanvitelli, Italy)

PhDs (Ongoing)

  1. Dhananjay Kumar, “Development of a Laser Ignited Vehicle Prototype with Multi-Cylinder CNG Fuelled Engine and Modelling Aspects,” (July 2017 Onwards).
  2. Hardik Valera, “Development of Methanol Fuelled Carburetted Two Wheeler Engine development, including spray and combustion studies,” (July 2018 onwards).
  3. Utkarsha Sonawane, “Development of Gasoline Compression Ignition Engine and Its Optimisation,” (July 2018 Onwards)
  4. Ashutosh Jena, “Optical Diagnostics for Engine Studies for Particulate Reduction,” (July 2018 Onwards)
  5. Ankur Kalwar, “GDI Engine Particulate Reduction,” ((July 2018 Onwards)
  6. Rahul Kumar Singh, “Fundamental Studies of High Pressures Sprays in Evaporating Environment,” (July 2020 Onwards)
  7. Shanti Mehra, “DME Fuelled Tractor Engine Development,” (July 2020 Onwards)
  8. Sam Joe Chintagutti, “Spray Investigations Under High Temperature and Pressure Environment,” (March 2021 Onwards).
  9. Saurabh Singh Chauhan, “Methanol Engine Development” (July 2022 onwards).
  10. Mahima Bhatnagar, "Flex Fuel Engine Development" (July 2023 Onwards)

MTech/ BT-MT Dual Degree (Completed)

  1. Lokesh Kumar, "Performance Evaluation of a Vegetable Oil Fuelled Compression Ignition Engine,” IIT Kanpur, November 2002. (Presently: Senior Research Manager, IOCL R&D Centre, Faridabad)
  2. Dharmendra Singh, “Performance of Metal Monolith Catalytic Converter on Kerosene Fuelled Spark Ignition Engine Genset, Using Secondary Air Injection,” IIT Kanpur, December 2002. (Co-Supervisor: Prof. B P Pundir)
  3. Dhananjay Srivastava, “Experimental investigation of The Effect of Liner Surface Properties on Wear, Friction and Surface Morphology in Non-Firing Engine Simulator,” IIT Kanpur, December 2003. (Co-Supervisor: Prof. Jitendra Kumar) (Presently: Assistant Professor, Department of Mechanical Engineering, Indian Institute of Technology Kharagpur, Kharagpur, W.B.)
  4. Shrawan Kumar Singh, “Effect of EGR on Emissions, Lubricating Oil and Wear in Diesel Engine,” IIT Kanpur, July 2004. (Co-Supervisor: Prof. M Sharma) (Presently: Senior Project Professional at SCS Engineers, Gainesville, Florida, United States)
  5. Mani Bijoy Varghese, “Numerical and Experimental Investigations of Oil Jet Cooling of Pistons,” IIT Kanpur, July 2004. (Presently: TCS)
  6. Sumit Pramanik, “Development of Bioceramic Materials for Hip Joint Replacement,” IIT Kanpur, July 2004. (Co-Supervisor: Prof. K N Rai) (Presently: Research Associate Professor, Department of Mechanical Engineering, SRM Institute of Science and Technology, Kattankulathur, Chennai)
  7. KVL Bharti, “Characterization of Particulates Emissions from Diesel Engines,” IIT Kanpur, July 2004. (Co-Supervisor: Prof. M Sharma)
  8. Deepak Agarwal, “Emissions and Performance of Straight Vegetable Oils (Jatropha and Neem) Fuelled Direct Injection Compression Ignition Engine,” IIT Kanpur, May 2005. (Presently: Director, Shanti Asiatic School, Jaipur)
  9. Dipankar Dwivedi, “A comparative Study of Particulates & Emission Characterization from Diesel and Biodiesel Exhausts,” IIT Kanpur, August 2005. (Co-Supervisor: Prof. M Sharma) (Presently: Research Scientist, Earth, and Environmental Sciences Area, Lawrence Berkley National Laboratory, Berkley, California, USA)
  10. Sandeep Kumar Goyal, “Experimental and Numerical Investigations of Jet Impingement Cooling of Piston for Controlling the Non-Tail Pipe Emissions,” IIT Kanpur, January 2006. (Presently: TCS)
  11. Rakesh Kumar Maurya, “Combustion and Emission Behavior of Ethanol Fuelled HCCI Engine: An Experimental Investigation,” IIT Kanpur, August 2006. (Presently: Associate Professor, Department of Mechanical Engineering, Indian Institute of Technology, Ropar, Punjab)
  12. Atul Dhar, “Development of Capacitance Based Micro-Sensors for Measurement of Lubricating Oil Film Thickness between Piston Ring-Liner Interface in an Engine Simulator,” IIT Kanpur, September 2006. (Presently: Associate Professor, School of Engineering, Indian Institute of Technology Mandi, Mandi, Himachal Pradesh-175075)
  13. Abhay Kumar Srivastava, “Comparative Analysis of Particulate Emission from Diesel Engine Using Diesel and Biodiesel Blends,” IIT Kanpur, September 2006. (Presently: Owner, JEE Coaching Institute, Kanpur)
  14. Vikas Katiyar, “Experimental Investigations of Bio-Origin Emulsified Fuels: Performance and Emission Analysis in a Single Cylinder Diesel Engine,” IIT Kanpur, August 2006. (Presently: Assistant Professor, Institute of Engineering and Technology, Kanpur University, Kanpur)
  15. Harish Kumar Gangwar, “Performance, Emission and Combustion Characteristics of Jatropha oil, Biodiesel, and Blends in an In-Direct Injection Compression Ignition Transportation Engine,” IIT Kanpur, July 2007. (Presently: DGM (Vehicle Engineering), Engineering Research Center, Tata Motors Ltd. Lucknow).
  16. Rajveer Singh Rathore, “Development of Activated Carbon Fiber (ACF) for the Control of NOx and Particulate Matter,” IIT Kanpur, May 2008. (Co-Supervisor: Prof. Nishith Verma)
  17. Shaswat Swami Jaiswal, “Numerical Simulation of Dilute Gas-Droplet Flow with Evaporation,” IIT Kanpur, June 2008. (Co-Supervisor: Prof. V Eswaran)
  18. Rajesh Singh, “Experimental Investigation of Performance and Combustion of vegetable Oils and Blends as Fuel in a Single Cylinder DICI Engine,” IIT Kanpur, January 2009. (Presently: PhD student, Civil Engineering Department, IIT Kanpur)
  19. Abhishek Kothari, “A Comparative Study of Particulate Matter Characterization for Biodiesel, Straight Vegetable Oil and Gasoline Fuelled Engine Exhaust,” IIT Kanpur, August 2009. (Presently: Manager, Engine Development Department, Engineering Research Division, MSIL)
  20. M. Sarveshwar Reddy, “Effect of Straight Vegetable Oils, Biodiesel and Its Blends on Fuel Injection Equipment (FIE) Components,” IIT Kanpur, July 2009.
  21. Akhilendra Pratap Singh, “Development of diesel HCCI engine: Experimental investigation of performance, emission and combustion characteristics,” IIT Kanpur, July 2010. (Presently: Assistant Professor, Department of Mechanical Engineering, Indian Institute of Technology (BHU), Varanasi)
  22. Vipul Chaudhary, “Experimental Spray Characterization of Biofuels in a Constant Volume Chamber,” IIT Kanpur, July 2010. (Presently: Assistant Professor, Department of Mechanical Engineering, Birla Vishavakarma Mahavidyalaya (Engineering College), Vallabha Vidyanagar, Anand-388120 Gujarat).
  23. Deepak Khurana, “Experimental Investigations of Oxidation Stability of Biofuels and Effect of Various Antioxidants on Stability, Engine Performance, and Emissions,” IIT Kanpur, July 2010. (Presently: PhD student, IIT Roorkee)
  24. Jitendra N. Gangwar, “Comparative Chemical Characterization of Particulates Emitted from Diesel and Biodiesel Fuelled CRDI Engine,” IIT Kanpur, November 2010. (Presently: Assistant Professor, MNNIT Allahabad).
  25. Himanshu Karare, “Performance, Emissions and Combustion Characteristics and Particulate Size Measurement in Gasohol Fuelled Medium Duty Spark Ignition Engine,” IIT Kanpur, August 2011.
  26. Jithin Lukose, “Characterization of Particulate Matter Emitted from Diesel and Gasoline Fueled HCCI Engine,” IIT Kanpur, September 2011. (Presently: Lead Engineer- Virtual Design & Verification, Product Validation, and Verification, John Deere Technology Centre, Pune)
  27. Paras Gupta, “Development of CRDI System for Genset Engine and Its Performance, Emission and Combustion Characteristics,” IIT Kanpur, July 2011. (Presently: Design R&D, Hero Moto Corp Ltd, Manesar)
  28. Tanmay Kar, “Development of Direct Injection Technology for CNG Induction and Its Engine Performance, Emission and Combustion Characteristics,” IIT Kanpur, July 2011. (Presently: Postdoctoral Researcher, Engine and Energy Conversion Lab, Colorado State University, Colorado, USA)
  29. Major Suraj Bhan Singh, “Performance, Emission and Combustion Characteristics of Butanol-Gasoline Blends in a Mid-Size Transportation Spark Ignition Engine,” IIT Kanpur, June 2012. (Presently: Colonel, Project Manager, CCE (Projects), Indian Army HQ, Delhi)
  30. Gajendra Singh, “Biodiesel HCCI Engine Development and its Performance, Emission and Combustion Investigations,” IIT Kanpur, July 2012. (Presently: Post-doctoral Research Associate, The University of Sydney, Australia)
  31. Prakhar Bothra, “Particulate and Emission Inventory for Different Vehicles,” IIT Kanpur, July 2012. (Presently: Tata Motors, Pune)
  32. Anuj Agarwal, “Endoscopic Combustion Diagnostics of Biodiesel Fuelled Compression Ignition Engine,” IIT Kanpur, July 2012. (Presently: Bosch, Bangalore)
  33. Kewal Dharamshi, “Laser Ignition of Hydrogen – Air Mixture in a Constant Volume Combustion Chamber,” June 2013. (Presently: Deputy Manager, Product Strategy, Mitsubishi Heavy Industries, Japan)
  34. Tadveer Singh Hora, “Development and Experimental Evaluation of Port Fuel Injected HCNG Engine” August 2014. (Presently: Calibration Engineer, AVL Powertrain Ltd., UK)
  35. Anuj Pal, “Prototype Development and Experimental Evaluation of Laser Ignited Hydrogen Fueled Engine,” IIT Kanpur, September 2014. (Presently: PhD. Student, Energy and Automotive Research Lab, Michigan State University, East Lansing USA)
  36. Harsh Goyal, “Microscopic and Macroscopic Spray Characterization of Biodiesel in a Constant Volume Spray Chamber,” IIT Kanpur, October 2014. (Presently: Post-doctoral Fellow, Clean Combustion Research Center (CCRC), King Abdullah University of Science and Technology (KAUST), Thuwal, Saudi Arabia)
  37. Suresh Jagannath Gadekar, “Tomographic PIV Investigations for In-Cylinder Flow Characterization in a Single Cylinder Optical Research Engine,” IIT Kanpur, August 2015. (Presently: IIM Calcutta)
  38. Sadaraboina Moses Vidya Sagar, “Technical Feasibility Study of Varying Composition HCNG Fuelled SI Engine Using Dynamic Gaseous Mixing System,” IIT Kanpur, October 2015. (Presently: Senior Engineer, System Modeling team, Eaton Technologies Pvt. Ltd., Pune)
  39. Yeshudas S Jiotode, “Endoscopic Combustion Investigations of Diesel Engine Fuelled with Biodiesel, Diesohol, Diesoline and Diesosene,” IIT Kanpur, November 2015. (Presently: Senior Manager, AI & Data Analytics Team, Tata Motors, Pune).
  40. Krishna Kumar Yadav, “Microscopic Characterization of Diesel and Biodiesel Spray Using Phase Doppler Interferometry,” IIT Kanpur, May 2016. (Presently: Ramswaroop Memorial College, Lucknow)
  41. Ayush Jain, “Fuel Injection Strategy Evaluation for Ultra-Low Emission Premixed Charge Compression Ignition Engine Development,” IIT Kanpur, June 2016. (Presently: Co-Founder, QuantaVid LLC, USA).
  42. Nikhil Bajpai, “Fuel Injection Strategy and EGR Optimization for PCCI Engine,” IIT Kanpur, October 2016.
  43. Krishn Chandra, “Combustion Visualization and Particulate Characterization of Waste Cooking Oil and Karanja Biodiesel Fuelled Engine,” IIT Kanpur, October 2016. (Presently: Ph.D. student, Università degli Studi della Campania "Luigi Vanvitelli,” Aversa (CE) 81031, Italy)
  44. Hemant Sharma, “Feasibility of Using Methanol-Diesel blends in an Unmodified Compression Ignition Genset Engine with Mechanical Fuel Injection Equipment,” IIT Kanpur, September 2017.
  45. Tushar Agarwal, “Development of Port Fuel Injected Methanol (M85) Fuelled Two – Wheeler Prototype,” IIT Kanpur, June 2019. (Presently: Head - New Products and Innovation, Noccarc Robotics Pvt Ltd. Pune)
  46. Prashumn, “Development and Experimental Evaluation of Diethyl Ether (DEE)-Diesel Blend Fueled Tractor Engine Prototype,” IIT Kanpur, July 2019. (Presently: Scientist/Engineer 'SC', Liquid Propulsion Systems Centre, ISRO)
  47. Vishnu Singh Solanki, “Development and Experimental Evaluation of Gasoline Compression Ignition (GCI) Prototype Engine,” IIT Kanpur, January 2020.
  48. Sagar Shrivastava, “Development of Port Fuel Injected Methanol Fuelled Two – Wheeler Engine,” IIT Kanpur, June 2020 (Presently: Associate Engineer, Gas Performance & Controls, Large Power Systems Division, Caterpillar Inc., Pune).
  49. Sulav Kafle, “Development and Experimental Evaluation of Methanol-Gasoline Blend (M15) Fuelled Medium Duty Spark Ignition Engine,” July 2020.
  50. Dhananjay Kumar, “Simulation of High-Pressure Co-Axial Injection system for Methanol Adaptation in a Locomotive Engine,” February 2021. (Presently: PhD student, Engine Research Laboratory, Indian Institute of Technology Kanpur, Kanpur-208016, India).
  51. Monojit Pal, “Development of Fuel Injection System for Di-Methyl Ether Applications in Compression Ignition Engines,” July 2021. (Presently: BYJUs, India).
  52. Omkar Yadav, “ECU Calibration for Methanol Adaptation in Motorcycle Engine”. July 2021. (Presently: Management Trainee, Mahindra and Mahindra Limited, MRV, Chennai, India).
  53. Akash Rai, “Evolution of Dimethyl Ether as an Alternate Fuel for Diesel”, October 2021.
  54. Harsimran Singh, “Combustion Control in Gasoline Compression Ignition Engine,” November 2021. (Presently: Project Associate, Engine Research Laboratory, Indian Institute of Technology Kanpur, Kanpur-208016, India).
  55. Deepak Kumar, Comparative Total Cost of Ownership Analysis of Two- and Four-Wheeler Battery Electric and Internal Combustion Engine Powertrain Vehicles”, August 2022. (Presently: Business Analyst, Accenture, Bangalore). (Co-Supervisor: Dr. Amir F Abdul Manan, Saudi Aramco).
  56. Aishi Ashirbad, “Laser Plasma Assisted Combustion of Gasoline Direct Injection Sprays in a Constant Volume Combustion Chamber”, August 2022 (Presently: Eaton, Pune)
  57. Ayush Tripathi, "Dimethyl Ether Fueled Single Cylinder Compression Ignition Engine Prototype Development and Experimental Evaluation", November 2022 (Presently: TMTL, Alwar)
  58. Shanti Mehra, “Development and Experimental Evaluation of Mechanical Fuel Injection System for Dimethyl Ether Induction for a Tractor Engine”, March 2023 (Presently; PhD Student, IIT Kanpur).
  59. Rahul Kumar Singh, “Life Cycle Assessment of BEVs, HEVs, and ICEVs for India”, June 2023 (Presently; PhD Student, IIT Kanpur)
  60. Shashank Shekhar, “Development of High Compression Ratio Compression Ignition Engine for Direct Injection of Methanol”, June 2023. (Presently: BorgWarner, Bangalore).

MTech/ M.S. (Ongoing)

  1. Shashank, (July 2021 Onwards).
  2. Lt. Cdr Tushar Jain, (July 2022 Onwards).
  3. Pushpam Dayal, (July 2023 Onwards).
  4. Parv Goel, (July 2022 Onwards).

Post-Doctoral Fellows

  1. Dr Dhananjay Kumar Shrivastava Worked as a Post-Doctoral Fellow from 18th July 2013 to 30th December 2013.
  2. Dr Atul Dhar Worked as a Post-Doctoral Fellow from 25th July 2013 to 15th November 2013.
  3. Dr Neeraj Kumar Gupta, Worked as Post-Doctoral Fellow from 1st March 2016 to 30th August 2017.
  4. Dr Chetan Patel, Worked as a Post-Doctoral Fellow from 1st December 2016 to 21st July 2018.
  5. Dr Nikhil Sharma Worked as a Post-Doctoral Fellow from 1st December 2017 to 31st July 2018.
  6. Dr Dev Prakash Satsangi Worked as a Post-Doctoral Fellow from 7th May 2018 to 28th September 2018.
  7. Dr Vikram Kumar, CSIR Pool Scientist, Worked as a Post-Doctoral Fellow from 7th April 2018 to July 31st 2022.
  8. Dr Nirendra Mustafi, Professor at Rajshahi University, Bangladesh, worked as Institute Post-Doctoral Fellow from 15th November 2018 to 18th September 2019.
  9. Dr Akhilendra Pratap Singh, Worked as a Post-Doctoral Fellow from 1st March 2017 to 7th December 2017 and from 1st January 2019 to 23rd December 2020.
  10. Dr M Krishnamoorty Working as a Post-Doctoral Fellow from 15th December 2020 onwards.
  11. Dr Vasudev Chaudhari, Worked as a Post-Doctoral Fellow from September 2022 to June 2023.
  12. Dr Srijit Biswas, Working as a Post-Doctoral Fellow (CSIR Pool Scientist) from 7th October 2022 onwards.
  13. Dr Pradeep P, Working as a Post-Doctoral Fellow from March 2023 onwards.

UG Students

  1. Raj Verma
  2. Anchit Gupta
  3. Parv Goel
  4. Kunal Singh
  5. Akash Birthal
  6. Vishesh Kaul
  7. Srijan
  1. Prototype Development of Ultra-Efficient Green Gasoline Fueled Compression Ignition (GCI) Engine for Decarbonization of Transport Sector, (Co-PI: M K Shukla, IIP Dehradun), Centre For High Technology (CHT), Ministry of Petroleum & Natural Gas, Three Years (July 2023-June 2026), Rs 1083 Lakhs.
  2. Biofuel production from carbon dioxide (CO2) and utilization in transport sector for reducing greenhouse gas (GHG) emissions, (Co-PI: Dr. Ashish Dutta, IIT Kanpur), Scheme for Promotion of Academic and Research Collaboration, Two Years (July 2023-June 2025), Rs 90.85 Lakhs.
  3. Methanol (M85) Fuelled Car Prototype Development and Field-Trials, (Co-PI: M K Shukla, IIP Dehradun), Centre For High Technology (CHT), Ministry of Petroleum & Natural Gas, Three Years (July 2023-June 2026), Rs 1487 Lakhs
  4. Lignocellulosic Biomass Conversion and Utilisation of Gas in Agricultural Engines, (Co-PI: Dr. Nitin Kumar Labhasetwar, CSIR-NEERI Nagpur),Indo-French Centre for the Promotion of Advanced Research (CEFIPRA), Two Years (August 2023-August 2025), Rs 184.40 Lakhs
  5. Comparative Life Cycle Assessment (LCA) and Total Cost of Ownership (TCO) Assessment for Compressed Natural Gas (CNG), Compressed Biogas (CBG) and Gasoline Fuelled Internal Combustion Engine Vehicles (ICEV) vis-a-vis Battery Electric Vehicles (BEV), New Energy and Industrial Technology Development Organization (NEDO) (Under the Ministry of Economy, Trade & Industry), Government of Japan, (December 2022-February 2023), (Rs 129 Lakhs).
  6. Low-Temperature Combustion (LTC) and Conventional Diesel Combustion (CDC) Engine Development Using Modified Piston And Variable Swirl Control Strategies, (Co-PI: Dr Ashish Dutta) Science & Engineering Research Board (SUPRA), Three Year (March 2022-March 2025), Rs. 79.88 Lakhs.
  7. Development of Primary Alcohols Fueled Engine Prototype (Co-PI: Dr Ashish Dutta), Indo-Czech Cooperative Scientific Research, Department of Science and Technology, New Delhi, Three Years (2020-2023), Rs 43.26 Lakhs.
  8. Prototype Development and Experimental Investigations of CNG Fueled Direct Injection Spark Ignition Engine (Co-PI: Dr Ashish Dutta), Indo-Korea International Cooperation Scientific Research, Department of Science and Technology, New Delhi, Three Years (2020-2023).
  9. J C Bose Fellowship, Science & Engineering Research Board, Five Year (Deceember 2019-December 2024), Rs. 95.00 Lakhs.
  1. Highly Efficient, Low Emission Gasoline Compression Ignition Engine Prototype Development, (Co-PI: Dr Tarun Gupta), Science & Engineering Research Board, Three Year (February 2020-January 2023), Rs. 59.2 Lakhs.
  2. Ultra-Clean Emissions DME Fuelled Tractor Engine Prototype Development for Agricultural Applications, (Co-PI: Dr Tarun Gupta), Science & Engineering Research Board, Two Year (January 2020-July 2022), Rs. 159.72 Lakhs.
  3. Design & Retrofitment for Development Methanol Fuelled Large Bore Engine (EMD 710: 4500hp) For Locomotive Marine & Power Generation Application, (Co-PI: Dr Tarun Gupta, IITK), Department Of Science And Technology, New Delhi, Two Year (Dec. 2017- Mar. 2020), Rs. 372.35 Lakhs.
  4. Investigation of Combustion and Soot Process in a Compression Ignition Engine Fueled with Biodiesel, Joint Programme of Cooperation in Science and Technology, (India- South Korea), (PI: Dr Tarun Gupta, IITK), Department of Science and Technology, New Delhi, Three Years (2015-2018), Rs 43.44 Lakhs.
  5. Experimental Investigations of HCCI/ PCCI Combustion in a Single Cylinder Research Engine Using Biodiesel, (Co-PI: Dr Tarun Gupta, IITK), Department Of Science And Technology, New Delhi, Three Years, 2013-16, Rs 157.48 Lakhs.
  6. Experimental Investigations on Combustion Characteristics and Emission Reductions of a Laser Fired Hydrogen Engine (Co-PI: Dr Abhijit Kushari, IITK), Ministry of New and Renewable Energy (MNRE), New Delhi, Four Years 2012-2016, Rs. 115.44 Lakhs.
  7. Development of A Common Rail Injection System for A Constant Speed Compression Ignition Engine (Co-PI: Dr Tarun Gupta, IITK), Council for Scientific and Industrial Research (CSIR), New Delhi, Two Years, 2012-15, Rs.14.68 Lakhs.
  8. Laser Ignition of Natural Gas Fuelled Single Cylinder Engine, (Co-PI: Dr Tarun Gupta, IITK), Science and Engineering Research Board, Department of Science and Technology, New Delhi, Two Years, 2012-14, Rs 38.00 Lakhs.
  9. Experimental Investigations of Fuel Sprays of Biodiesel, Straight Vegetable Oils and Their Blends with Mineral Diesel for Optimizing Fuel Injection Equipment to Lower Engine Exhaust Emissions, Joint Programme of Cooperation in Science And Technology, (India- South Korea), (Co-PI: Dr Tarun Gupta, IITK), Department of Science And Technology, New Delhi, Three Years (2011-2014), Rs 28.00 Lakhs.
  10. Fuel Spray and Combustion Visualization Using Endoscope in Biodiesel Fuelled Direct Injection Engine for Optimal Fuel Injection Strategy and Emission Reduction (Co-PI: Dr Ashish Dutta, IITK), Department of Science and Technology, New Delhi, Two Years Six months (2012-2014), Rs 53.05 Lakhs.
  11. Physico-Chemical Characterization of Nano-Particle Emanating from Diesel Engines (Mineral Diesel and B20 Fuelled) and Their Control Using Diesel Oxidation Catalysts, (PI: Dr Tarun Gupta, IITK), Science and Engineering Research Board, Department of Science and Technology, New Delhi, Two Years (2012-14), Rs 41.00 Lakhs.
  12. Combustion, Material Compatibility and Engine Tribology Investigation in a Biodiesel Fuelled Turbo-charged Transportation Engine, (Co-PI: Dr Tarun Gupta, IITK), Department of Science and Technology, New Delhi, Three Years (2010-2013), Rs. 64.86 Lakhs.
  13. Development of Bi-Functional Solid Catalyst for Transesterification of Jatropha Oil and Effect of Jatropha Oil Biodiesel on the Lubricating Oil Performance and Life in a Medium-Duty Compression Ignition Transportation Engine, Shell India Pvt. Ltd., Bangalore, Four Years, August 2007- November 2011, Rs. 59.00 Lakhs.
  14. Comparative Chemical Characterization and Evaluation of Toxic Potential of Metals and PAH’s Present in Both Primary and Secondary Particulates Emitted from Combustion in Diesel Vs. Biodiesel Engines, (PI: Dr Tarun Gupta, IITK), Department of Science and Technology, New Delhi, Three Years, November 2008- November 2011, Rs 89.81 Lakhs.
  15. Effects of Biodiesel Oxidation Stability on the Engine Combustion and Emission Characteristics (Co-PI: Dr Tarun Gupta, CE), Department of Science and Technology, New Delhi, Indo-South Africa Cooperation Project, Three Years project, October 2009- March 2012, Rs. 7.62 Lakhs.
  16. Fundamental Investigations on Laser Ignition of Combustible Gas-Air Mixtures in a Constant Volume Combustion Chamber for Engine Applications, Department of Science and Technology, New Delhi, (2009-2011), Rs. 32.70 Lakhs.
  17. Career Award for Young Teachers (CAYT), All India Council for Technical Education (AICTE), New Delhi, Government of India, 2005-2009, Rs. 10.50 Lakhs.
  18. Experimental and Numerical Investigations of Piston Cooling by Oil Jet Impingement, (Co-PI: Prof. P S Ghoshdastidar, IITK), Council for Scientific and Industrial Research (CSIR), New Delhi, 2005-2008, Rs. 7.00 Lakhs.
  19. Biodiesel: Process and Pilot Plant Development, (Co-PI: Dr Sanjeev Garg, IITK) Khadi and Village Industries Commission (KVIC), Mumbai, 2003-08, Rs. 17.00 Lakhs.
  20. Particulate Matter Emission and Lubricity Studies on Biodiesel Fuelled Transportation Engine, Ministry of Human Resources Development (MHRD), Government of India, 2005 – 07, Rs. 25.00 Lakhs.
  21. Scope and Limitations of Non-Edible Vegetable Oil as a Substitute Fuel for Diesel Engines-An Experimental Study, Department of Science and Technology, New Delhi, 2005-08, Rs. 56.15 Lakhs.
  22. Development of Capacitance Based Micro-Sensor for Oil Film Thickness Measurements, Ministry of Human Resources Development (MHRD), Government of India, 2004–2006, Rs. 16 Lakhs.
  23. Exhaust Emission Reduction from Internal Combustion Engines, Ministry of Human Resources Development (MHRD), Government of India, 2003- 2005, Rs. 8.00 Lakhs.
  24. Production and Investigation of Biodiesel produced from different vegetable oils, Department of Science and Technology, New Delhi, Government of India, 2002-2005, Rs. 6.60 Lakhs.
  25. Alternative Fuels for IC Engines for Emission Reduction and Energy Conservation, Ministry of Human Resources Development (MHRD), Government of India, 2002-2004, Rs. 15.00 Lakhs. (PI: Prof. B P Pundir)
  26. Improvement of Energy Conversion Laboratory at IIT, Kanpur, Ministry of Human Resources Development (MHRD), Government of India, 2004-2005, Rs. 4.00 Lakhs.
  27. Improvement of Energy Conversion Laboratory at IIT, Kanpur, Ministry of Human Resources Development (MHRD), Government of India, 2003-2004, Rs. 6.50 Lakhs.
  1. LCA & TCO Analysis of 4W ICEV, BEV & HEVs, New Energy and Industrial Technology Development Organization (NEDO) (Under the Ministry of Economy, Trade & Industry), Government of Japan, (December 2022-February 2023).
  2. Methanol as a Sustainability Solution in Railway Applications, Wabtec India Industrial Private Limited, Bangalore, (December 2022-March 2023).
  3. Ultra-Clean Emission DME Fuelled Tractor Engine Prototype Development For Agricultural Applications, TAFE Ltd, Alwar, (August 2020-July 2022).
  4. Lubrication Oil Quality Assessment on Royal Enfield Engine, Royal Enfield, (February-August 2015).
  5. Interfacing Of ECU of EFI with Test Commander, Research Designs and Standards Organisations (RDSO), Lucknow, Indian Railways (May-September 2011).
  6. Field Trial of Biodiesel (B100) Fuelled Scorpio CRDE Vehicle, Mahindra and Mahindra Limited, Nashik, (July 2006-March 2007).
  7. Design Improvements in the furnace of Khandsari Industry for air pollution prevention and control, (Co-PI: Prof. Mukesh Sharma), Central Pollution Control Board (CPCB) (July-September 2003).
  1. image
    Fellow of CI (Combustion Institute, USA), March 2022
  2. image
    Fellow of AAAS (American Association for the Advancement of Science), February 2020.
  3. image
    Fellow of WSSET (World Society for Sustainable Energy Technologies), UK, October 2020
  4. image
    Sir J C Bose National Fellow (Science and Engineering Research Board, GoI), August 2019
  5. image
    Fellow of RSC (Royal Society of Chemistry, UK) October 2018.
  6. image
    Fellow of NASI (National Academy of Sciences India), October 2018.
  7. image
    Fellow of INAE (Indian National Academy of Engineering), December 2015.
  8. image
    Fellow of ISEES (International Society of Energy, Environment, and Sustainability), December 2015
  9. image
    Fellow of ASME , (American Society of Mechanical Engineers), October 2013.
  10. image
    image
    image
    Fellow of SAE International (Society of Automotive Engineers International, USA), October 2012.
  11. image
    Life Member, Solar Energy Society of India (SESI)
  12. image
    Life Member, Combustion Institute (India Section)
  13. image
    Member, Institution of Engineers (India)
  14. image
    Life Member, Tribology Society of India (TSI)
  15. image
    Life Member, International Society for Energy, Environment and Sustainability (ISEES)
  16. image
    Member, International Association of Hydrogen Energy (IAHE)
  17. image
    Member, American Association for the Advancement of Science (AAAS)
  1. image
    SAE India Foundation Guru Award-2022.
  2. image
    WSSET Innovation Award-2022 in “Renewable Energy Systems” category by WSSET (World Society for Sustainability Energy Technology, UK) in SET-22 held in Istanbul, Turkey from August 16-18, 2022.(Award being Received by Prof. K S Reddy of IIT Madras, on behalf of Prof. Avinash Kumar Agarwal)
  3. image
    State Bank of India Endowed Chair Professor, IIT Kanpur (2022-25).
  4. image
    Prestigious “Shanti Swarup Bhatnagar Prize for Science and Technology - 2016” in Engineering Sciences, by CSIR, Government of India. Handed over by the Prime Minister of India Sh. Narendra Modi on 28th February 2019, in Vigyan Bhawan, New Delhi.
  5. image
    Distinguished Alumnus Award-2022 from Indian Institute of Technology Delhi.
  6. image
    Distinguished Alumnus Award-2021 from Malviya National Institute of Technology, Jaipur. In the first batch of DAA recipients from MNIT Jaipur in 58 years of their existence.
  7. image
    IITDAA- Outstanding Contributions to the National Development Award -2023 from Indian Institute of Technology Delhi.
  8. image
    India Citation Award-2018 from India by Clarivate Analytics, Web of Science. Among the top ten highly cited researchers (HCR) from India, among 4000 HCR researchers globally in 22 fields of inquiry.
  9. image
    State Bank of India Endowed Chair Professor, IIT Kanpur (2018-21).
  10. image
    Clarivate Analytics India Research Excellence - Citation Award - 2017 in Engineering Sciences, 6th Edition by Web of Science.
  11. image
    Er. M P Baya National Award in Mechanical Engineering-2017, by Institution of Engineers, Udaipur Local Chapter.
  12. image
    Rajib Goyal Prize in Physical Sciences-2015 by Kurukshetra University.
  13. image
    Poonam and Prabhu Goyal Endowed Chair Professor, IIT Kanpur (2013-16).
  14. image
    NASI-Reliance Industries Platinum Jubilee Award for Application Oriented Innovations in Physical Sciences by National Academy of Sciences, Allahabad, India, August 2012.
  15. image
    INAE Silver Jubilee Young Engineer Award – 2012, by Indian National Academy of Engineering, India, April 2012. This award was given to only four INAE Young Engineer Awardees of the last 25 years, during INAE Silver jubilee celebrations, for continued excellence in Engineering and Research.
  16. image
    Dr C. V. Raman Young Teachers Award: 2011 for Excellence in Engineering Education, by IES, Bhopal, December 2011.
  17. image
    Ralph R. Teetor Educational Award-2008, by SAE International, USA, April 2008.
  18. image
    Devendra Shukla Research Fellowship, Young Chair Professorship in Energy, IIT Kanpur (09-12).
  19. image
    INSA Young Scientist Award-2007, by Indian National Science Academy, India, December 2007.
  20. image
    UICT Alkyl Amine Young Scientist Award-2007, by University Institute of Chemical Technology, Mumbai, August 2007. First Mechanical Engineer to get this Chemical Engineering Award.
  21. image
    INAE Young Engineer Award-2005, by Indian National Academy of Engineers, India, December 2005.
  22. image
    AICTE Career Award for Young Teachers-2004 by All India Council for Technical Education.
  1. Member (President of India Nominee in Individual Capacity) of IIT Council, the highest policy-making body of IITs. May 2022-May 2025.
  2. Member of the Board of Management of Defence Institute of Advance Technology (DIAT), Pune, October 2022 Onwards).
  3. Member of the Board of Governors (BOG) of Kamala Nehru Institute of Technology (KNIT), Sultanpur, May 2022-May 2025.
  4. Member of Research Council of Central Mechanical Engineering Research Institute, Durgapur (CSIR-CMERI) from July 2021-July 2024.
  5. Chairman of the Engineering Sciences Committee of CSIR Senior Research Associate (SRA) selection, December 2021-December 2024.
  6. AICTE Nominee Member of Selection Committee for Bihar Public Service Commission, Patna, February 2022-February 2025.
  7. Member of the AICTE Technical Book Writing Committee for UG (Engineering) and Diploma, following AICTE Model Curriculum and Indian Languages, December 2021-December 2022,
  8. Member of Program Advisory Committee (PAC) for Technology Development Programme (TDP) under Technology Development & Transfer (TDT) Division of Department of Science & Technology (DST). (From June 2022- June 2025).
  9. Member of Program Management Review Committee (PMRC) for SERB’s Industry Relevant R&D (IRRD) Program ‘Fund for Industrial Research Engagement (FIRE)’– SERB-GE India FIRE PMMC (From September 2021- September 2022).
  10. Member of DST Subject Expert Committee (SEC) for the Evaluation of Project Proposals Received under “Women Scientist Scheme–B (WOS-B) (From October 2020- October 23).
  11. Member of SERB’s ABHYAAS Expert Committee (AEC) for inter-ministerial Accelerate Vigyan (AV) Scheme– 2020 (From October 2020- October 23).
  12. Member of SERB’s Core Research Grant (CRG) Project Advisory Committee Mechanical Engineering – 2020 (2020-23).
  13. Chair of CPCB Sub-committee Responsible for Making Locomotive Emission Norms for India, 2019.
  14. Member of Standing Committee on Emissions for Off-Road Applications, 2018 onwards.
  15. Member, Board of Studies, Department of Mechanical Engineering, Chatrapati Shahuji Maharaj University (USJM), Kanpur (2022-23).
  16. Member, Board of Studies, Department of Mechanical Engineering, Harcourt Butler Technological University (HBTU), Kanpur (2020-21).
  17. Member of SERB’s EMEQ Task Force Committee – 2018, 2019, 2020 and 2021 for Project Evaluations.
  18. Member of NITI Ayog’s Task Force for Conversion / Design of Methanol/ DME based engines, GOI (2017-2019).
  19. Member of the Electric and Hybrid Vehicles Sectional Committee of BIS (TED 27), Government of India (2018-2022)
  20. Member of Task force on Methanol / DME, Department of Science and Technology, GOI (2017-19).
  21. Member of Expert Group on R&D issues related to Production and Utilization of Methanol / DME, Department of Science and Technology, GOI’s Expert Group (2016-19).
  22. Member of National Committee Institution of Engineers (India) of Mechanical Engineering for Certification of Professional Competence (PE) Certification of Engineers (2016 – onwards).
  23. Member of Technology Systems Group, Department of Science and Technology, GOI’s Expert Group on Biofuels and Retrofitting of Engines (2002-07).
  24. Member, Board of Associates, American Society of Mechanical Engineering, Internal Combustion Engine Division (Since April 2005).
  25. Reviewer for ASME Transactions, Journal of Engineering for Gas Turbine and Power, Journal of Energy Resources Technologies, SAE Transactions 2002, 2004, 2005, ASTM Lubrication manual 2001, Energy, Fuel, Applied Energy, International Journal of Hydrogen Energy, Journal of Automobile Engineering, Journal of Biomaterial and Artificial Organs, CIGR E-journal, Indian Journal of Applied Mathematics, Journal of Solar Energy, Talanta, ASME-ICED Spring and Fall Conferences 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 SAE World Congress 2003, 2004, 2005, 2006, 2007, 2008, 2016, 2017, Applied Thermal Engineering, International Journal of Engine Research, Progress in Energy and Combustion Science, Renewable Energy, Energy Conversion and Management, Fuel Processing Technology, Energy and Fuels, International Journal of Sustainable Energy, International Energy Journal, etc.
  26. SAE International awarded appreciation certificates for significant contributions to the Thermal Management Activities of SAE World Congress 2005.
  27. Listed in Marquis Who’s who is Science and Engineering (7th edition, 2003-2004; 9th edition 2006, 10th Edition, 2007), Who’s who of Emerging Leaders (1st Edition, 2006, 2nd Edition, 2007), Who’s Who Asia (1st Edition, 2006, 2nd Edition, 2007), Who’s Who in the World (2008 edition) is.
  28. Member in SAE Transaction review committees for Lubricants; Fuels; Diesel Combustion; Spark Ignition. Member of SAE Diesel Engine Activity Committee, Thermal Management Committee (2005-15).
  1. Associate Editor of ASME Open Journal of Engineering from March 2023 Onward. .( https://journaltool.asme.org/home/Mastheads.cfm?JournalID=38)
  2. Associate Editor of ASME Journal of Energy Resource Technology from March 2023 Onward.
  3. Editor of FUEL, an Elsevier Journal, since May 2019. (https://www.sciencedirect.com/journal/fuel/about/editorial-board)
  4. Series Editor of the Book Series Entitled “Energy Environment and Sustainability,” published by Springer, Singapore, since 2016. Series editor for 70 Springer books, 10 books are in the pipeline on various topics related to Energy, Environment, Sustainability, and Combustion.(https://www.springer.com/series/15901)
  5. Associate Editor of SAE International Journal of Engines from March 2023 Onward.( https://www.sae.org/publications/collections/content/E-JOURNAL-03/)
  6. Member of Editorial Board of International Journal of Engine Research, published by SAE International and IMechE, London, UK since April 2016.
  7. Associate Editor of Journal of the Institution of Engineers (India): Series C, since January 2016.
  8. Editor-in-Chief of the Journal of Energy and Environmental Sustainability (ISSN: 2455-2259), Published by International Society of Energy, Environment, and Sustainability, Since July 2015.
  9. Associate Editor of Journal of Energy Resource Technology, Transactions of ASME, since September 2013.
  10. Review Editor of Frontier of Mechanical Engineering, since 2015 onwards.
  11. Member of the editorial board of “International Journal of Oil, Gas and Coal Technology” (IJOGCT), Published by Inderscience Publishers, Switzerland since 2012-2015.
  12. Associate Editor of International Journal of Vehicle Systems Modeling and Testing, Published by Inderscience Publishers, 2010-13.
  13. Member of the editorial board of Journal of Automobile Engineering, Proceedings of IMechE, Part-D, Published by Institution of Mechanical Engineers, London, UK (2003-21).
  14. Member of the editorial board of the Recent Patents on Mechanical Engineering, published by Bentham Science Publishers (2007-15).
  15. Guest Editor for a Special Issue on Alternative Fuels, for the Journal of Automobile Engineering, Published by Institution of Mechanical Engineers, London, UK, Published as Vol. 221, issue 8, August 2007.
  1. 1994: Institution of Engineers (India), Rajasthan State Chapter, Jaipur.
  2. 1998: University of Roorkee, India
  3. 1999: Indian Institute of Technology, Kanpur
  4. 1999: University of Wisconsin, Madison, USA
  5. 2000: Indian Institute of Technology, Delhi
  6. 2000: Indian Institute of Technology, Kanpur
  7. 2002: Wolfson School of Mechanical and Manufacturing Engineering, University of Loughborough, UK
  8. 2002: Institution of Engineers (India), Kanpur Local Chapter, Kanpur
  9. 2003: Center for High Technology, Ministry of Petroleum, Government of India
  10. 2003: Indian Oil Corporation (R&D Center), Faridabad
  11. 2004: Diesel Locomotive Workshop, Varanasi.
  12. 2004: Photonics Institute, Technical University of Vienna, Austria
  13. 2004: Chemical Engineering Department, Technical University of Vienna, Austria
  14. 2005: Argonne National Laboratory, Chicago, USA
  15. 2005: College of Military Engineering, Vadodara
  16. 2006: Research Designs and Standards Organization, Lucknow
  17. 2006: University of Michigan, Dearborn, USA
  18. 2006: Institution of Engineering (India), Kanpur Local Chapter on ‘World Environment Day.’
  19. 2007: Rajiv Gandhi Technical University, Bhopal
  20. 2007: University Institute of Chemical Technology, Mumbai, UICT- Alkyl Amine Foundation Day Young Scientist Award Lecture, 4th August 2007.
  21. 2009: Indian Institute of Science, Bangalore
  22. 2010: Indian Institute of Technology Bombay
  23. 2010: Asian Institute of Technology, Bangkok
  24. 2012: Hanyang University, Seoul
  25. 2013: Technical University of Vienna, Austria
  26. 2013: Hanyang University, Seoul, South Korea
  27. 2013: Indian Institute of Technology Roorkee, India
  28. 2014: Hanyang University, Seoul, South Korea
  29. 2014: University of Illinois, Chicago, USA
  30. 2015: King Abdullah University of Science and Technology, Saudi Arabia
  31. 2015: Korea Advanced Institute of Science and Technology, Daejeon, South Korea
  32. 2015: MACFAST, Thiruvalla, Kerala, India
  33. 2016: MNIT, Jaipur
  34. 2016: Amity University, Gwalior
  35. 2017: Amity University, Gwalior
  36. 2018: National Institute of Technology Agartala
  37. 2018: National Environmental Engineering Research Institute Nagpur
  38. 2018: Indian Institute of Technology Delhi
  39. 2018: Railways Board, New Delhi
  40. 2018: Central Pollution Control Board, New Delhi
  41. 2019: SMC, Indian Institute of Technology Kanpur
  42. 2019: SURGE, Indian Institute of Technology Kanpur
  43. 2019: LEAP Program, Banaras Hindu University, Varanasi
  44. 2019: Annual FIPI Convention, New Delhi (Keynote)
  45. 2020: S S Bhatnagar Endowed Lecture, IIT Ropar
  46. 2020: Opinion Society, IIT Kanpur.
  47. 2021: Neurological Society of India Webinar on Innovation, Incubation and Patents.
  48. 2021: Clean Energy Technologies Lecture, organsied by IIT Dhanbad, ACS International Student Chapter, and IIChE Regional Centre Dhanbad.
  49. 2022: Technology Excellence Celebrations for Engineers’ Week, Wabtec Corporation, India
  50. 2022: Sixth Lecture Workshop on Trans-disciplinary Areas of Research and Teaching by Shanti Swarup Bhatnagar Awardees, jointly organized by NASI and Deen Dayal Upadhyaya College, University of Delhi.
  51. 2022: Hansraj College, University of Delhi.
  1. Future Prospects of Green and Environmental-Friendly Fuels for UAV Applications, Keynote Speech in the 10th Conference on Propulsion Technologies for Unmanned Aerial Vehicles organized by the Faculty of Mechanical Engineering, Technion Israel Institute of Technology, Haifa, Israel, on 16th February 2023.
  2. Future Prospects of Internal Combustion Engines in a Green and Environment-Friendly Methanol Economy, Keynote Talk in the Indo-French workshop on Clean And Sustainable Energy Technologies, organized by CIMFR Dhanbad at CSIR- National Physical Laboratory, New Delhi, on 21-23rd February 2023.
  3. Energy Transition to Methanol Economy for Transport Sector, Keynote Speech in Workshop Entitled "Change Management for the Energy Transition", organized by Indian Oil Corporation Limited on 26th November 2022.
  4. "Future Prospects of Green and environmental Friendly Methanol Economy" Keynote Talk at 27th National Conference on IC Engines and Combustion (NCICEC 2022), organized by Automotive Research Centre (ARC) and the School of Mechanical Engineering (SMEC), VIT Vellore in association with the Combustion Institute Indian Section (CIIS) on 7th November 2022.
  5. Future of the Internal Combustion Engines and Existential Threat from Battery Electric Vehicles? Sixth Lecture Workshop (Online) on Trans-disciplinary Areas of Research and Teaching by Shanti Swarup Bhatnagar Awardees, organized by Deen Dayal Upadhyaya College, University of Delhi, on January 28th, 2022.
  6. Directions in Engine and Fuel Research at IIT Kanpur: Role of Lasers and Optics and Methanol Economy, Keynote Speech in 1st India Converge User’s Conference, organized by Convergent Science, the USA on 16th May 2019, at Hotel Holiday Inn, Hinjewadi, Pune.
  7. Future Prospects of Internal Combustion Engines in a Green and Environment-Friendly Economy, Institute Lecture at Indian Institute of Technology Roorkee on 12th October 2018.
  8. Future Prospects of Green and Environment-Friendly Methanol Economy, Keynote Speech in 3rd International Conference on Powertrain Technology on 11th October 2018, held at India Habitat Center, New Delhi, organized by ICAT Manesar.
  9. Engine Exhaust Particulates: Characterization, Control Technologies, and Toxic Effects, Keynote speech on 6th April 2018 in “Pursuing Clean Air and Water for All: Environmental Science & Technology Symposium in India,” held at Shiv Nader University, Delhi.
  10. Technology Roadmap for DME/ Methanol Fuelled Vehicles in Indian Mega-Cities, Keynote Speech in 1st International Conference on Mechanical Engineering (INCOM 2018), from 4th - 6th January 2018, Organised by Department of Mechanical Engineering, Jadavpur University, Kolkata.
  11. Technology Roadmap for DME/ Methanol Fuelled Vehicles in Indian Mega-Cities, Keynote Speech in 24th National and 2nd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2017), at BITS Pilani, Hyderabad Campus from 27-30 December 2017.
  12. Global Transportation Systems and Fuels: Past, Present and Future, Keynote Speech on 17th November 2017 NSHM Knowledge Campus Durgapur, West Bengal in a one-day seminar on "Advancements in Alternative Fuels.”
  13. Indian Energy Scenario and Role of Engineers in Energy Sector, Keynote Speech on Engineer’s Day 15th September 2017, at Institution of Engineers, Udaipur Local Chapter, Udaipur, Rajasthan.
  14. Technology Roadmap for DME/ Methanol Fuelled Vehicles in Indian Mega-Cities, Keynote Speech at the Eleventh National Frontiers of Engineering Symposium (NatFOE11) on 30 June & 1 July 2017, organized by IIT Bombay.
  15. Global Transportation Systems and Fuels: Past, Present, and Future, Keynote Speech on 16th January 2017, at Amity University, Gwalior.
  16. DME/ Methanol Roadmap for Indian Automotive Sector, Keynote Speech 30th September 2016 in 2nd Conference on Powertrain Technology, 29th – 30th September 2016, ICAT, Manesar.
  17. Engine Technology Roadmap for DME Fuelled Vehicles in Indian Mega-Cities, Keynote Speech in International Seminar on “Methanol Economy,” 6-7 September 2016, Sam Maneksha Center, New Delhi, organized by NITI Aayog.
  18. Biofuels Production and Utilization Research in IITK: Path forward, Keynote Speech at IITs-Finnish Universities Joint Workshop on Bioenergy at IIT Delhi from May 23-24th, 2016.
  19. Optical Diagnostics: Possibilities for Next Generation IC Engine Powertrain Development and Emission, Keynote Speech on 24th September 2015 in 1st Conference on Powertrain Technology, 23-24th September 2015, ICAT, Manesar.
  20. Future Fuels for Transportation Sector, Keynote Speech on 8th August 2015 at Institution of Engineers, Rajasthan State Chapter, Jaipur.
  21. Status and Way Forward for Hybrid Technologies in Indian Automotive Sector, Keynote Speech on 7th August 2015 at Mechanical Engineering Symposium at MNIT Jaipur.
  22. Status and Way Forward for Hybrid Technologies in Indian Automotive Sector, Keynote Speech on 6th June 2015 at Ninth National Frontiers in Engineering Symposium (9th NatFOE-2015) held at IIT Jodhpur from 5-7 June 2015.
  23. Tomographic Particle Image Velocimetry for Flow Analysis in a Single Cylinder Optical Engine, Invited Seminar on March 1st, 2015 at Clean combustion Research Center, King Abdullah University of Science and Technology, Saudi Arabia.
  24. Technical Feasibility and Challenges in Sustainable Fuels in Indian Context, Keynote Speech in International Conference on Sustainable Fuels for IC engines in Emerging Nations, organized by TERI & Tata Motors from 2-3 February 2015 at the Taj Palace Hotel, New Delhi.
  25. Sustainable Energy and Transportation Technologies for 21st Century, Plenary Speech on the Occasion of National Education Day on 11th November 2014, at University Institute of Engineering and Technology, CSJM University Kanpur.
  26. Engine Studies with Jatropha (SVO and Biodiesel) @ ERL, IIT Kanpur, Keynote Speech on October 13th, 2014 at “Jatropha Updates 2014” symposium, Organized by TERI and Kasetsart University, Bangkok in New Delhi.
  27. Future Fuels for Transportation Sector, Keynote Speech on 27th July 2014 at Institution of Engineers, Kanpur Local Chapter, Kanpur.
  28. Role of Engine Technologies and Alternative Fuels in Energy and Environmental Preservation, Keynote Speech on the Occasion of Energy Conservation Day, December 14th, 2013 at Institution of Engineers, Roorkee Local Centre, Roorkee.
  29. Future Sustainable Transport Fuels, Plenary Speech in Student Festival Mecharnival-13, on 9th March 2013 at HBTI Kanpur.
  30. Role of Engine Technologies and Alternative Fuels in Environmental Preservation, Plenary Talk on National Conference on Advancement in Automobile Engineering, on 16th February 2013 at Kautilya Engineering College, Jaipur.
  31. Some Innovations in Engine Research Using Lasers, Keynote Speech at Indian Physics Association’s theme meeting entitled "Synergy in Physics and Industry,” from January 21-22nd, 2013 at Bhabha Atomic Research Centre, Mumbai.
  32. Some Innovations in Engine Research, Keynote Speech at Seventh National Frontiers of Engineering Symposium (7NatFOE) from 12-14th October 2012, organized at IIT Guwahati.
  33. Homogeneous Charge Compression Ignition Engine: Developmental Challenges and Way Ahead, Keynote Speech in 8th G-COE Symposium on “Eco-friendly Materials and Processes for Low-Carbon & Sustainable Society” at NEERI, Nagpur from December 15-16, 2011.
  34. Laser Ignition: Challenges and Opportunities, Keynote Speech on 20th September 2011 in 2nd International Clean Vehicle Conference, Deakin University, Waurn Ponds, Geelong Campus, Australia.
  35. Engine Research at ERL IITK: Some Studies on Biodiesel, and Particulates, Invited Seminar at Argonne National Laboratory, Chicago, USA on April 20th, 2011.
  36. Biodiesel: Engine Performance: A Critical Analysis as a Future Fuel, Invited Seminar in Department of Aerospace Engineering, IIT Kanpur on 22nd February 2011.
  37. Biofuels Research: Challenges and Opportunities, Keynote Speech in 5th International Conference on Innovations in Food and Bio-Process Technology, December 2010, AIT, Bangkok, Thailand.
  38. Contribution of Engine Research Laboratory to Internal Combustion Engine Science and Technology: Journey from 2001-10, Keynote Speech at International Workshop on the Advances in Automotive Technology, from 10-11th November 2010 in Bengal Engineering and Science University Shibpur, Kolkata.
  39. Role of Engine Technologies and Alternative Fuels in Environmental Preservation, Keynote Speech on 4th April 2010 at National Conference on “Advances in Management of Energy Efficiency and Clean Environment (AMEECE),” April 3-4, 2010, Harcourt Butler Technological Institute, Kanpur.
  40. Biofuels and HCCI Research at Engine Research Laboratory (ERL), IIT Kanpur: 2001-2008, Keynote Speech at 20th November 2008 at Mobility Engineering Conference Bangalore-2008 (MECB-2008), organized by IISc, Bangalore.
  41. Future of Energy, Keynote Speech in REACH Symposium, IIT Kanpur, held at Hotel Taj Chandela, Khajuraho from 16-17th March 2008.
  42. Research Activities @ Engine Research Laboratory, IIT Kanpur, Invited Speech at the Second Indo-US Frontiers of Engineering Symposium, 27th February - 01st March 2008 at Beckman Center, Irvine, US.
  43. UICT- Alkyl Amine Foundation Day Young Scientist Award Lecture, 4th August 2007, University Institute of Chemical Technology, Mumbai.
  44. Energy Scenario for Transportation of Future: Advances in IC Engines and Alternate Fuels, Invited Seminar at Department of Mechanical and Aerospace Engineering, University of Michigan, Dearborn, USA on 4th April 2006.
  45. Recent Advances in Internal Combustion Engine Technology, Invited Seminar on 9th May 2005 at EME School, Vadodara.
  46. Engine Diagnostics, Invited Seminar at Department of Chemical Engineering, Technical University of Vienna, 22nd June 2004.
  47. Application of Various Optical Techniques for Engines, Invited Seminar at Photonics Institute, Technical University of Vienna, 17th June 2004.
  48. Biodiesel Development, Characterization, and Utilization in a DI Compression
    Ignition Engine and Investigation of Effect of Fuel Chemistry on Oil Tribology, Invited Seminar on 10th June 2002 at Wolfson School of Mechanical and Manufacturing Engineering, University of Loughborough, UK.

Prof. Avinash Kumar Agarwal obtained his Undergraduate Degree in Mechanical Engineering (1994) from Malviya Regional Engineering College, Jaipur and his MTech (Energy, 1996) and PhD (Energy, 1999) from the Indian Institute of Technology (IIT) Delhi. After his Post-Doctoral Fellowship (1999 – 2001) at the ERC, UW, Madison, USA, he returned to India in 2001 and joined IIT Kanpur. He was a Visiting Professor at the University of Loughborough, UK; Photonics Institute, University of Vienna, Austria; Hanyang University and KAIST, South Korea. Prof. Agarwal is interested in research in IC engines, combustion, conventional and alternative fuels, Methanol/ DME/ Hydrogen/ HCNG fuelled engine development, LCA and TCO analyses, Fuel sprays, Lubricating oil tribology, optical diagnostics, laser ignition, HCCI, particulates and emission control, and large bore engines.

He has developed laser-fired hydrogen and CNG engines in automotive sizes and developed the first electronic fuel injection system equipped with a locomotive engine for Indian Railways. Currently, Prof. Agarwal is developing Methanol and DME-fuelled engines/ vehicles for the automotive/ agricultural sectors. Prof. Agarwal has published over 520 peer-reviewed international journal and conference papers, 63 edited books, and 129 book chapters, attracting 16000+ Scopus and 24000+ Google Scholar citations. Prof. Agarwal is the Editor of ‘FUEL’, Editor-in-Chief of the “Journal of Energy and Environmental Sustainability, Associate Editor of the ASME Journal of Energy Resources Technology, ASME Open Journal of Engineering, International Journal of Vehicle Systems Modelling and Testing, and the Journal of the Institute of Engineers (Series C) and an editorial board member of IMechE International Journal of Engine Research. He edited Wiley VCH, Germany’s “Handbook of Combustion” (5 Volumes; 3168 pages), the most updated combustion compilation globally.

For his outstanding contributions, Prof. Agarwal is conferred upon Sir J C Bose National Fellowship (2019) by SERB, SAE India Foundation GURU Award (2022), WSSET Innovation Award-2022, Clarivate Analytics India Citation Award-2017 in Engineering and Technology, Prestigious Shanti Swarup Bhatnagar Prize (2016) in Engineering Sciences, Rajib Goyal Prize in Physical Sciences (2015); NASI-Reliance Industries Platinum Jubilee Award (2012); INAE Silver Jubilee Young Engineer Award (2012); Dr C. V. Raman Young Teachers Award (2011); SAE Ralph R. Teetor Educational Award (2008); INSA Young Scientist Award (2007); UICT Young Scientist Award (2007); INAE Young Engineer Award (2005); Devendra Shukla Research Fellowship (2009-12), Poonam and Prabhu Goyal Endowed Chair Professorship (2013-16), SBI Endowed Chair Professorship (2018-21, 2022-25) at IIT Kanpur; AICTE Career Award for Young Teachers (2004); DST Young Scientist Award (2002); and DST BOYSCAST Fellowship (2002), in addition to inaugural version of Distinguished Alumni Award-2021 by MNIT Jaipur and Distinguished Alumni Award-2022 by IIT Delhi.

Prof. Agarwal is a highly cited researcher-2018 in and is among the top ten HCRs from India, among 4000 HCR researchers globally in 22 fields of enquiry. He is India’s number one Energy researcher in the recently declared Stanford University listing of the top 2% of researchers globally. He is an elected Fellow of the Society of Automotive Engineers International, USA (SAE; 2012), American Society of Mechanical Engineers (ASME; 2013), Indian National Academy of Engineering (INAE; 2015), International Society for Energy, Environment and Sustainability (ISEES; 2016), Royal Society of Chemistry (RSC; 2018), National Academy of Science Allahabad (NASI; 2018), World Society of Sustainable Energy Technologies (WSSET-2020), American Association for Advancement in Science (AAAS; 2020) and Combustion Institute USA (CI; 2022). He is featured in the DST Golden Jubilee Coffee Table Book “75 under 50 Scientists Shaping Today’s INDIA,” released by Vigyan Prasar, Government of India, on National Science Day, February 28th, 2022. At IIT Kanpur, Prof. Agarwal has established a state-of-the-art “Engine Research Laboratory” (www.iitk.ac.in/erl), and he was also the founder-director of IIT Kanpur’s Science and Technology Research Park (Technopark@iitk; http://www.technoparkiitk.com). He also founded the International Society for Energy Environment and Sustainability (www.isees.in) in 2014 and is the Editor of the Book Series Entitled “Energy Environment and Sustainability,” published by Springer, Singapore (2016 onwards).

Contributions to Science and Technology

  • Technology Development and Technology Transfer to Industry: Developed an Electronic Fuel Injection (EFI) system for ALCO-DLW locomotives, giving>4% fuel saving and >70% lower particulate emissions. Annual fuel savings for Indian Railways to be ~USD 100 M upon implementation.
  • New Engine Technology Development: Hydrogen Engine, HCCI engine, Laser Ignited Engines, Methanol engine and vehicle prototypes, DME tractor prototype.
  • Biofuels Research: Biodiesel, SVO, Methanol, DME, Hythane (HCNG), CNG, Ethanol, Butanol.
  • Particulate/ Emission Control Research: Non-noble metal-based DOC development.
  • Established State-of-the-Art Engine Research Laboratory at IITK: 2 Optical Research Engine for Tomographic PIV investigations, Phase Doppler Interferometry applied to Dense Sprays and in-cylinder engine conditions, Chassis Dynamometer for 2W Testing.
  • Four papers in Progress in Energy and Combustion Science (Impact Factor: 28.938). One single-authored paper in PECS was published in 2007 (Scopus Citations > 2200+).

Fellowship/ Awards and Recognitions

  • Fellow of CI (Combustion Institute, USA), March 2022
  • Fellow of AAAS (American Association for the Advancement of Science), February 2020
  • Fellow of WSSET (World Society for Sustainable Energy Technologies), UK, October 2020
  • Sir J C Bose National Fellow (Science and Engineering Research Board, GoI), August 2019
  • Fellow of RSC (Royal Society of Chemistry, UK) October 2018.
  • Fellow of NASI (National Academy of Sciences India), October 2018.
  • Fellow of INAE (Indian National Academy of Engineering), December 2015.
  • Fellow of ISEES (International Society of Energy, Environment, and Sustainability), December 2015.
  • Fellow of ASME (American Society of Mechanical Engineers), October 2013.
  • Fellow of SAE International (Society of Automotive Engineers International, USA), October 2012.
  • SBI Endowed Chair Professor @ IIT Kanpur (2022-25).
  • CSIR’s Shanti Swarup Bhatnagar Prize-2016 was awarded by the Prime Minister of India.
  • Distinguished Alumnus Award-2022 from Indian Institute of Technology Delhi.
  • Distinguished Alumnus Award-2021 from Malviya National Institute of Technology, Jaipur.
  • India Research Excellence - Clarivate Analytics Citation Award-2017.
  • Rajib Goyal Prize-2017 by Kurukshetra University.
  • Highly Cited Researcher-2018 from India by Clarivate Analytics. Among the top 10 HCR from India.
  • Er. M P Baya National Award in Mechanical Engineering-2017.
  • NASI-Reliance Industries Platinum Jubilee Award -2012 for Application Oriented Innovations in Physical Sciences.
  • INAE Silver Jubilee Young Engineer Award-2012.
  • Dr C. V. Raman Young Teachers Award-2011 for Excellence in Engineering Education.
  • SAE Internationals’ Ralph R. Teetor Educational Award-2008.
  • INSA Young Scientist Award-2007.
  • UICT Alkyl Amine Young Scientist Award-2007.
  • INAE Young Engineer Award-2005.
  • AICTE Career Award for Young Teachers-2004.
  • DST Young Scientist Award-2002.
  • DST BOYSCAST Fellowship-2002.
  • Editor of FUEL (2019 onwards).
  • Associate Editor of ASME Journal of Energy Resources Technology, Transactions of ASME (2013-19).
  • Series Editor of the Book Series Entitled “Energy Environment and Sustainability,” published by Springer, Singapore (2016 onwards).
  • Member of the editorial board of Journal of Automobile Engineering, Proceedings of IMechE (2003-2021).
  • Member of Editorial Board of International Journal of Engine Research, SAE International and IMechE, London (2016 Onwards).
  • Associate Editor of Journal of the Institution of Engineers (India): Series C (2016 onwards).
  • Editor-in-Chief of the Journal of Energy and Environmental Sustainability (2015 onwards).
  • Review Editor of Frontier of Mechanical Engineering (2015 onwards).
  • Member of the editorial board of the “International Journal of Oil, Gas and Coal Technology” (2012-15).
  • Associate Editor of International Journal of Vehicle Systems Modeling and Testing” (2007-15).
  • Member of the editorial board of the Recent Patents on Mechanical Engineering, published by Bentham Science Publishers (2007-15).
  • SBI Endowed Chair Professor @ IIT Kanpur (2018-21).
  • Poonam and Prabhu Goyal Endowed Chair Professor @ IIT Kanpur (2013-16).
  • Devendra Shukla Research Fellowship @ IIT Kanpur.

Summary of Publications and Academic impact

International Peer-Reviewed Papers

H Index

Citations

I-10 Index

International Conference Papers

Number of Patents

Google Scholar

Scopus

Google Scholar

Scopus

Google Scholar

Scopus

522 (Scopus)

67

56

24257

16122

274

210

127

3


No. of Books

Book Chapters

PhD Thesis Guidance

MTech Guidance

Sponsored / Consultancy Projects

Extra Mural Funding

Outreach (QIP Course)

Int. Events Organised

65

135

14 Graduated, 10 Ongoing

60 Graduated, 3 Ongoing

33 Completed, 8 Ongoing

60.00 Crores

17 (1 week) +
2 (2 weeks)

7 Workshops 7 conferences


Other Achievements:

  • Six students are faculty in the IIT system (IIT Kharagpur, Ropar, Bhilai, IITBHU, and 2 in Mandi, respectively), few more are likely to join soon. 52 MTech students in R&D of Automotive Industries in India.
  • Edited “Handbook of combustion” (3200 pages of combustion), the most updated reference in Combustion globally. Springer Book Series Editor on Energy, Environment, and Sustainability.
  • Among top 10 Indian Authors in the ‘Energy’ domain (2009-14) from India, based on publication count in 2002-2014, from India (Source: National Science and Technology Management Information Systems (NSTMIS), DST, Govt of India).
  • One single-authored paper among the top ten most highly cited papers (2200+ Scopus citations) published from India in the Engineering domain. NSTMIS, DST, Thomson Reuters Report-2015.
  • In top 2% list of Scientists Prepared by Stanford University, 2021. First in Energy Domain out of 136 Indian Researchers in this list in 2019, 2020, 2021.
  • Featured in DST Golden Jubillee Coffee Table Book “75 under 50 Scientists Shaping Today’s INDIA,” released by Vigyan Prasar, Government of India, on National Science Day, February 28th, 2022.
  1. NPTEL videos on Fundamental of IC Engines (UG Level) (https://www.youtube.com/watch?v=rvpMbBB6RrU&list=PL6kB4KeyhXc6GN3Gcvhl9YQEcMGD9M_Ym)
  2. NPTEL videos on Alternate Fuels and Advances In IC Engines: Lecture (PG Level) (https://www.youtube.com/watch?v=QDn-jjNjhWg&list=PL6kB4KeyhXc6Y7BkWKt76956BcUoBRGHv)
  3. Engine Research Laboratory (https://www.youtube.com/watch?time_continue=1&v=C6-44yKUrMk&feature=emb_logo)
  4. Flex Fuel Engines (https://www.youtube.com/watch?v=ya0PX0aPT24&list=PLovfyA55qtz0VdE32lVAPK70WPGCm7fwQ)
  5. Technical Education in Mother Tongue | New Education Policy (https://www.youtube.com/watch?v=1AyJ0rPm9dg&list=PLovfyA55qtz1bunyQBN6pCAM9FEEamVq6)
  6. Interaction on Fuel of the Future : Green Hydrogen at India Science (https://www.youtube.com/watch?v=qmJq5efhAoA&list=PLovfyA55qtz3wWTz_LLgVir6tPHtofds8)
  7. Career in Research and Development (https://www.youtube.com/watch?v=y_LbQUIuK-w&list=PLovfyA55qtz3q5UUeo2mPaMeLbjX4fIz3)
  8. IIT Kanpur Research and Technology Park - Fostering Industry-IITK Partnerships (https://www.youtube.com/watch?v=vnANGjtKw8U&list=PLovfyA55qtz3Ff10HL5BuQCPrMzrRxFNt)
  9. Future of the Internal Combustion Engines and Existential Threat from Battery EV? (https://www.youtube.com/watch?v=jq31Aox-bNI&list=PLovfyA55qtz0Jv4Ue5tZlJaHIaGahojqU)
  10. SMC 2019 at Deptt. of Mechanical Engineering, IIT Kanpur (https://www.youtube.com/watch?v=rXHcZsqS_Vc&list=PLovfyA55qtz22bhyYFumlKLVaf_cJVFMz)
  11. Interaction with Professor Avinash | Pioneer in Engine Research (https://www.youtube.com/watch?v=NuLBwFGi72Y&list=PLovfyA55qtz3rUCq7U-9QAgIrxgFjyUF1)
  12. Conversation in HINDI with Dr Avinash Kumar Agarwal (https://www.youtube.com/watch?v=_8VhmF7-epY)
  13. Seld Dependance on Renewable Energy: Science Time (https://www.youtube.com/watch?v=SLdIsrREqmo&list=PLovfyA55qtz0aQ5u6mjnZEZEmBgi2g6EW)
  14. The Changing Mood of the Monsoon & Nano Robot (https://www.youtube.com/watch?v=yf2ePC_ASjU&list=PLovfyA55qtz3X8Wj-KKORbIsXpjBPJb14)
  15. Keynote Address at 10th Conference on Propulsion Technologies for Unmanned Aerial Vehicles, Technion (https://www.youtube.com/watch?v=1_dUtixlWQs)
  16. Transformational Research by Prof Agarwal IIT Kanpur | Methanol fueled 2 wheeler | R & D Fair (https://www.youtube.com/watch?v=uDDA7BTuAcc)
  17. Methanol Economy  (https://www.youtube.com/watch?v=YVXYeJOmr4A)
  18. Proposal writing for funding (https://www.youtube.com/watch?v=6UFuTtuPIP0&list=PLovfyA55qtz1wFxZapjCfzuCvKu0cZKpx)