Current PhD. Candidates

Anubhuti Saha

Department of Design

Year of Joining: 2015
Co-supervisor(s): Dr. Ritwij Bhowmick

Shreyansh Tatia

Department of Design

Year of Joining: 2017

Mohit Pandey

Department of Design

Year of Joining: 2017

Rashiku M

Department of Mechanical Engineering

Year of Joining: 2018

Sanjeet Kumar

Department of Design

Year of Joining: 2018

Saumitra Krishna

Department of Design

Year of Joining: 2018

Nitish Katiyar

Department of Mechanical Engineering

Year of Joining: 2019

Sagnik Sharma Chaudhury

Department of Mechanical Engineering

Year of Joining: 2019

Kirtiman Singh

Department of Design

Year of Joining: 2019

Kuldeep Rathore

Department of Mechanical Engineering

Year of Joining: 2020

Hemant Kumar

Department of Mechanical Engineering

Year of Joining: 2021

Great People to work with!

  1. Book Name: Economies of advanced trainings, basics, concepts, and methods (Miniaturized nucleic acid analysis)

    Authors/ ISBN No.: Bhattacharya, Shantanu (Ed.), ISBN9783836437684

    Year: 2008

    Publisher: VDM Verlag, Starbuccken, Germany

  2. Book Name: Water Remediation

    Authors/ ISBN No.: Bhattacharya, Shantanu, Akhilen Bhushan Gupta, Ankur Gupta, and Ashok Pandey (Eds.) ISBN9789811075506

    Year: 2018

    Publisher: Springer (https://link.springer.com/book/10.1007/978-981-10-7551-3)

  3. Book Name: Environmental, Chemical and Medical Sensors

    Authors/ ISBN No.: Bhattacharya, Shantanu, Avinash Kumar Agarwal, Nripen Chanda, Ashok Pandey, and Ashis Kumar Sen, (Eds.) ISBN9789811077500

    Year: 2018

    Publisher: Springer (https://link.springer.com/book/10.1007/978-981-10-7751-7)

  4. Book Name: Nanoenergetic Materials

    Authors/ ISBN No.: Bhattacharya, Shantanu, Avinash Kumar Agarwal, T. Rajgopalan, Vinay Kumar Patel (Eds.) ISBN 978-981-13-3289-0

    Year: 2018

    Publisher: Springer (https://link.springer.com/book/10.1007/978-981-13-3269-2)

  5. Book Name: Sensors for aerospace and automotive applications

    Authors/ ISBN No.: Bhattacharya, Shantanu, Avinash Kumar Aggarwal, Shailendra Singh, Om Prakash (Eds.) ISBN 978-981-13-3269-2

    Year: 2018

    Publisher: Springer (https://link.springer.com/book/10.1007/978-981-13-3290-6)

  6. Book Name: Paper Microfluidics: Theory and practice

    Authors/ ISBN No.: Bhattacharya, Shantanu, Avinash Kumar Agarwal, Sanjay Kumar (Eds.) ISBN 978-981-15-0489-1

    Year: 2019

    Publisher: Springer (https://link.springer.com/book/10.1007/978-981-15-0489-1)

  7. Book Name: Automotive Tribology

    Authors/ ISBN No.: Jitendra Kumar Katiyar, Shantanu Bhattacharya, Vinay Kumar Patel, Vikram Kumar

    Year: 2019

    Publisher: Springer (https://link.springer.com/book/10.1007/978-981-15-0434-1)

  8. Book Name: MEMS applications in Biology and Healthcare

    Authors/ ISBN No.: Basu, Aviru Kumar, Basu, Adreeja, Ghosh, Sagnik, Bhattacharya, Shantanu (Eds.) ISBN (Online): 978-0-7354-2395-4

    Year: 2021

    Publisher: American Institute of Physics (AIP) (https://aip.scitation.org/isbn/9780735423923)

  9. Book Name: Carbon Nanostructures Fundamentals to Applications

    Authors/ ISBN No.: Rajagopalan Thiruvengadathan, Somnath Chanda Roy, Poonam Sundriyal, Shantanu Bhattacharya (Eds.) ISBN (Online): 978-0-7354-2311- 4

    Year: 2021

    Publisher: American Institute of Physics (AIP) (https://aip.scitation.org/doi/book/10.1063/9780735423114)

  10. Book Name: Trends in Fabrication of Polymers and Polymer Composites

    Authors/ ISBN No.: Vinay Kumar Patel, Rishi Kant, Pankaj Singh Chauhan, and Shantanu Bhattacharya (Eds.) ISBN (Online): 978-0-7354-2391-6

    Year: 2022

    Publisher: American Institute of Physics (AIP) (https://aip.scitation.org/isbn/9780735423886)

  11. Book Name: Trends in applications of Polymers and Polymer Composites

    Authors/ ISBN No.: Vinay Kumar Patel, Rishi Kant, Pankaj Singh Chauhan, and Shantanu Bhattacharya (Eds.)

    Year: 2022

    Publisher: American Institute of Physics (AIP) (https://doi.org/10.1063/9780735423916)

  12. Book Name: MEMS applications in electronics and Engineering

    Authors/ ISBN No.: Basu, Aviru Kumar, Basu, Adreeja, Ghosh, Sagnik, Bhattacharya, Shantanu (Eds.)

    Year: 2022 (In production)

    Publisher: American Institute of Physics (AIP)

  13. Book Name: Gas Sensors: Manufacturing, Materials, and Technologies

    Authors/ ISBN No.: Gupta, Ankur, Kumar. Mahesh, Singh, Rajeev Kumar, Bhattacharya, Shantanu (Eds.)

    Year: 2022 (In production)

    Publisher: CRC Press Taylor and Francis

  14. Book Name: Impedance Spectroscopy and its application in biological detection

    Authors/ ISBN No.: Bhatt, Geeta, Bhatt, Manoj Kumar, Bhattacharya, Shantanu (Eds.)

    Year: 2022 (In manuscript stage)

    Publisher: CRC Press Taylor and Francis

  1. Introduction to Manufacturing Process (TA202A) Core course for 2nd Year, with hands on fabrication of live mechanisms for motion transfer

  2. Manufacturing Processes Technology (ME361) (Process Modeling based departmental compulsory course for 3rd year)

  3. Manufacturing Systems (ME461), (Departmental compulsory course for 4th Year students)

  1. Advanced Manufacturing Techniques (ME662) highlighting modeling for Non-traditional Machining Techniques

  2. Design Project-1 (DES 681): Compulsory PG course for Design student in first semester.

  3. Design Project- 2 (DES 682): Compulsory PG course for Design student in second semester.

  4. Design Practice-1 (DES 602): Compulsory PG course for Design student in first semester.

  5. Design Practice-2 (DES 603): Compulsory PG course for Design student in second semester.

  1. Shantanu Bhattacharya, NPTEL Lectures on Bio-MEMS and Microsystems, NPTEL, IIT Kanpur (Completed, Jan.-2011).

  2. 2) Shantanu Bhattacharya, NPTEL Lectures on Microsystems Fabrication by using Advanced Manufacturing processes, (Completed, Jun-2014).

  3. Shantanu Bhattacharya, NPTEL MOOCS, Bio-MEMS and Micro-fluidics, (NPTEL, IIT Kanpur (Completed, March-2015, Course developed in MOOCS format).

  4. Shantanu Bhattacharya, NPTEL MOOCS, Manufacturing Systems Technology (Part-I), NPTEL, IIT Kanpur, (Completed, Sept.-2015). (Offered on regular basis once a semester)

  5. Shantanu Bhattacharya, NPTEL MOOCS, Manufacturing Systems Technology (Part-II), NPTEL, IIT Kanpur (Completed, Oct.-2015) (Offered on regular basis once a semester)

  6. Shantanu Bhattacharya, NPTEL MOOCS, Manufacturing process Technology (Part-I), NPTEL, IIT Kanpur (Completed, March-2016) (Offered on regular basis once a semester)

  7. Shantanu Bhattacharya, NPTEL MOOCS, Manufacturing process Technology (Part-II), NPTEL, IIT Kanpur (Completed, September-2016) (Offered on regular basis once a semester)

  8. Shantanu Bhattacharya, NPTEL MOOCS, Design Practice (Part-I), NPTEL, IIT Kanpur (Completed, Mar. 2018) (Offered on regular basis once a semester).

  9. Shantanu Bhattacharya, NPTEL MOOCS, Design Practice (Part-II), NPTEL, IIT Kanpur (Completed, Sept. 2018) (Offered on regular basis once a semester).

  10. Shantanu Bhattacharya, NPTEL MOOCS, Applied Ergonomics, NPTEL, IIT Kanpur (Completed, Mar. 2019).

  11. Shantanu Bhattacharya, NPTEL MOOCS, Advanced manufacturing process for micro system fabrication, NPTEL, IIT Kanpur, (Completed, July. -2019).

  12. Regularly offering (a) Manufacturing Process Technology, (b) Manufacturing Systems Technology, (c) Design Practice (individually) and (d) Applied ergonomics (co-shared with Prof. Ankur Gupta, IIT Jodhpur) for the years 2020-2022. The average enrollment in course (a) and (b) is around 3500+ per course per semester.

  1. Computer Integrated Manufacturing Systems (VLFM program, part teaching and full CIMS laboratory) 2016-2020.

  2. Product Design New Product Management (VLFM program, part teaching and full product module development exercise) 2016-2019.

  1. Delivered a 20-hour lecture module to graduate students at the University of Missouri-Columbia in “BioMEMS and Microsystems”- 2011.

  2. Delivered a 12-hour lecture series on “Nanotechnology and Nanoelectromechanical Systems” for Industrial Research and Development units at Mumbai, India (2009)

  3. Manufacturing Technology Management Web-based course with IACT Global, for industry managers for manufacturing technology management. (2011-2012)

  4. Delivered a 20-hour lecture series at Suzuki Motors India Limited, Gurgaon for “Lean manufacturing”. (2013)

  5. Delivered lectures in many QIP & ATAL courses on CNC machining, Reverse engineering, Quality, Lean Manufacturing, Conventional and Non-conventional machining processes, Biomedical Micro-devices, Manufacturing of MEMS sensors, Micro-fluidic MEMS, Nano-structured Gas sensors, Nanotechnology for Clinical Diagnostics, Nano-energetic materials, Water remediation through photocatalysis Printable Supercapacitors, Impedance Spectroscopy of nucleic acids, Acoustic metamaterials, Microcantilever sensors etc.

  1. Shantanu Bhattacharya, J.M. Berg, S. Gangopadhyay, “Studies on surface wettability of PDMS and glass under oxygen plasma treatment and correlation with bond strength”, Journal of Microelectromechanical Systems, Vol. 14, No.3, June 2005. (10.1109/JMEMS.2005.844746) (Impact factor: 2.417)

  2. Shantanu Bhattacharya, Yuanfang Gao, Steve Apperson, Rajesh Shende, S. Gangopadhyay, “A novel on-chip diagnosis method to detect flame velocity of nanoscale thermites”, Journal of Energetic materials, Vol. 24, pp. 1-15, Jan. 2006 (https://doi.org/10.1080/07370650500374318) (Impact factor: 2.42)

  3. Shantanu Bhattacharya, Venumadhav Korampally, Yuanfang Gao, Maslina Othman, Sheila A. Grant, Keshab Gangopadhyay, Shubhra Gangopadhyay, “Optimization of design and fabrication process for realization of a PDMS-Silicon DNA amplification chip”, Journal of Microelectromechanical systems, Vol.16, pp.401-410, 2007 (https://doi.org/10.1109/JMEMS.2007.892926) (Impact factor: 2.417)

  4. Shantanu Bhattacharya, Yuanfang Gao, Venumadhav Korampally, M.T. Othman, Sheila Grant, Keshab Gangopadhyay, Shubhra Gangopadhyay, ”Mechanics of plasma exposed spin-on-glass (SOG) and polydimethyl siloxane (PDMS) surfaces and their impact on bond strength”, Applied Surface Science, Vol. 253, No. 9, pp.4220-4225, 2007  (https://doi.org/10.1016/j.apsusc.2006.09.028) (Impact factor: 6.707)

  5. Shantanu Bhattacharya, Jaesung Jang, Liju Yang, Demir Akin and Rashid Bashir, “BioMEMS and Nanotechnology based approaches for rapid detection of biological entities - Invited Review”, The Journal of Rapid methods and automation in microbiology, Vol.15, pp.1-32, 2007 (https://doi.org/10.1111/j.1745-4581.2007.00073.x) (Impact factor: 0.654)

  6. Maruf Hossain, Senthil Subramanium, Shantanu Bhattacharya, Yuanfang Gao, Steve Apperson, Rajesh Shende, Suchi Guha, Shubhra Gangopadhyay, “Crystallization of amorphous silicon by self-propagation of nanoenergetic thermites”, Journal of applied physics, Vol. 101, pp. 054509-1~6, 2007 (https://doi.org/10.1063/1.2450672) (Impact factor: 2.546)

  7. Shantanu Bhattacharya, Shuaib Salamat, Dallas Morrisette, Padmapriya Banada, Yishao Liu, Demir Akin, A.K. Bhunia, Michael Ladisch and Rashid Bashir, “PCR-based detection in a micro-fabricated platform”, Lab on chip, Vol.8, pp. 1130-1136, 2008 (https://doi.org/10.1039/B802227E) (Impact factor: 6.799)

  8. Shantanu Bhattacharya, Gangopadhyay, Deb; Chanda, Nripen; Grant, Sheila A.; Liu, Yishao; Sharp, Paul R.; Bashir, Rashid; Gangopadhyay, Keshab; Gangopadhyay, Shubhra, “Low voltage capillary electrophoresis using high conductivity agarose nano-platinum composites”, Sensor Letters, Vol.6, pp. 1-6, 2008 (https://doi.org/10.1166/sl.2008.m141) (Impact factor: 2.36)

  9. Shantanu Bhattacharya, Nripen Chanda, Yi Shao Liu, Sheila A. Grant, Keshab Gangopadhyay, Rashid Bashir, Paul Sharp and Shubhra Gangopadhyay, “Enhanced DNA separation rates on nano-platinum doped agarose”, Journal of Bionanosciences, Vol. 2, pp. 1-8, 2008 (https://doi.org/10.1166/jbns.2008.035) (Impact factor: 2.31)

  10. Yi-Shao Liu, Padmapriya Banada, Shantanu Bhattacharya, Arun K. Bhunia and Rashid Bashir, “Electrical characterization of DNA molecules in solutions using DNA measurements”, Applied Physics Letters, Vol. 92, pp. 143902, 2008 (https://doi.org/10.1063/1.2908203) (Impact factor: 3.791)

  11. Sangho Bok, Arnold A. Lubguban, Yuanfang Gao, Shantanu Bhattacharya,  Kevin Gillis, Sanju Gupta, Paul R. Sharp and Shubhra Gangopadhyay, “Electrochemical Properties of Carbon Nanoparticles Entrapped in a Silica Matrix”, Journal of Electrochemical Society, Vol. 155, No. 5, K91-K95, 2008  (DOI: 10.1149/1.2868772) (Impact factor: 4.316)

  12. Ok Kyng Koo, YiShao Liu, Shuaib Salamat, Shantanu Bhattacharya, Michael R. Ladisch, Rashid Bashir and Arun K. Bhunia, “Targeted capture of pathogenic bacteria using a mammalian cell receptor coupled with dielectrophoresis on a biochip”, Analytical Chemistry, Vol. 81, No. 8, pp. 3094–3101, 2009  (https://doi.org/10.1021/ac9000833) (Impact factor: 6.986)

  13. Anil Ghubade, Swarnasri Mandal, Rahul Chaudhury, Rajeev Kr. Singh and Shantanu Bhattacharya, “Dielectrophoretic Assisted Concentration of Micro-particles and their rapid quantitation based on optical means”, Biomedical Microdevices, Vol. 11, No. 5, pp. 987-995 2009 (https://doi.org/10.1007/s10544-009-9316-6) (Impact factor: 2.372)

  14. Yuanfang Gao, Shantanu Bhattacharya, Xiaohui Chen, Syed Barizuddin, Shubhra Gangopadhyay, Kevin D. Gillis, “A microfluidic cell trap device for automated measurement of quantal catecholamine release from cells”, Lab on chip, Vol. 9, pp. 3442 - 3446, 2009 (https://doi.org/10.1039/B913216C) (Impact factor: 6.799)

  15. Shantanu Bhattacharya, R.K. Singh, Swarnasri Mandal, Sangho Bok, Venumadhav Korampally, Keshab Gangopadhyay, Shubhra Gangopadhyay, “Plasma modification of polymer surfaces and their utility in building Biomedical microdevices (Invited Review) Journal of Adhesion Science and Technology, Vol. 24, No. 15-16, pp. 2707-2739(33), 2010 (https://doi.org/10.1163/016942410X511105) (Impact factor: 2.077)

  16. Rahul Chaudhury, R.K. Singh, Anil B. Ghubade, Swarnasri Mandal, Shantanu Bhattacharya, “Bilayered staggered Herringbone micromixers with Symmetric and Assymetric geometries”, Microfluidics nanofluidics, Vol. 4, pp. 419-425, 2010 (https://doi.org/10.1007/s10404-010-0667-3) (Impact factor: 2.529)

  17. Arnab Ghosh, Tarak K. Patra, Rishi Kant, Rajeev Kr. Singh, Jayant K. Singh, Shantanu Bhattacharya, “Surfaces electrophoresis of ds-DNA across orthogonal pair of surfaces”, Applied Physics Letters, Vol. 98, No. 1, pp. 1-4, 2011 (https://doi.org/10.1063/1.3565238) (Impact factor: 3.791)

  18. Rishi Kant, Himanshu Singh, Monalisha Nayak, Shantanu Bhattacharya, “Optimization of design and characterization of a novel micro-pumping system with peristaltic motion”, Microsystem Technologies, Volume 19, Pg. 563–575, 2013 (https://doi.org/10.1007/s00542-012-1658-y) (Impact factor: 1.513)

  19. Rajeev Kumar Singh, Rishi Kant, Mohammad Asfer, Bishakh Bhattacharya, Pradipta K. Panigrahi & Shantanu Bhattacharya, “Passive vibration damping using polymer pads with micro-channel arrays”, Journal of Microelectromechanical Systems, Volume: 22, Issue: 3, June 2013 (https://doi.org/10.1109/JMEMS.2013.2241392)  (Impact factor: 2.417)

  20. Vinay Kumar Patel and Shantanu Bhattacharya, “High-Performance Nanothermite Composites Based on Aloe-Vera-Directed CuO Nanorods”, ACS Appl. Mater. Interfaces, 5, 24, 13364–13374, 2013 (https://doi.org/10.1021/am404308s) (Impact factor: 9.229)  

  21. Rajeev Kumar Singh, Ankur Gupta, Shantanu Bhattacharya, “Design and fabrication of 3-dimensional helical structures in polydimethylsiloxane for flow control applications”, Microsystem Technologies, 20, 101–111, 2014 (https://doi.org/10.1007/s00542-013-1738-7) (Impact factor: 1.513)

  22. Monalisha Nayak, Deepak Singh, Himanshu Singh, Rishi Kant, Ankur Gupta, Shashank Shekhar Pandey, Swarnasri Mandal, Gurunath Ramanathan & Shantanu Bhattacharya, “Integrated sorting, concentration and realtime PCR detection system for sensitive detection of Micro-organisms”, Scientific Reports, Volume 3, Article number: 3266, 2013 (https://doi.org/10.1038/srep03266) (Impact factor: 4.379)

  23. Avinash Kumar, Ankur Gupta, Rishi Kant, Syed Nadeem Akhtar, Nachiketa Tiwari, J. Ramkumar, Shantanu Bhattacharya, “Optimization of LASER machining process for the preparation of photo masks and its application to Micro-systems fabrication”, Journal of Micro/Nanolithography, MEMS, and MOEMS 12(4), 041203 2013 (https://doi.org/10.1117/1.JMM.12.4.041203) (Impact factor: 1.37)

  24. Ankur Gupta, Shashank Shekhar Pandey, Monalisha Nayak, Arnab Maity, Subhashish Basu Majumder, Shantanu Bhattacharya, “Hydrogen sensing based on nanoporous silica-embedded ultra-dense ZnO nanobundles”, RSC Adv., Vol. 4, No. 15, pp. 7476-7482, 2014 (https://doi.org/10.1039/C3RA45316B) (Impact factor: 3.36)

  25. Ankur Gupta, Abhinav Srivastava, Cherian Joseph Mathai, Keshab Gangopadhyay, Shubhra Gangopadhyay, Shantanu Bhattacharya, “Nanoporous Palladium sensor for sensitive and rapid detection of Hydrogen”, Sensor letters, Vol. 12, pp. 1279-1285, 2014 (https://doi.org/10.1166/sl.2014.3307) (Impact factor: 2.36)

  26. Akshay Atwe, Ankur Gupta, Rishi Kant, Shayandev Sinha, Ishan Sharma, Shantanu Bhattacharya, “A novel microfluidic switch for pH control using Chitosan based Hydrogels”, Microsystem Technologies, Volume 20, pp. 1373–1381, 2014 (https://doi.org/10.1007/s00542-014-2112-0) (Impact factor: 1.513)

  27. Brindan Tulachan, Sunil Meena, Ratan Rai, Chandrakant Mallick, Tejas Kusurkar, Arun Kumar Teotia, Niroj Sethy, Kalpana Bhargava, Shantanu Bhattacharya, Ashok Kaul, Raj Kishore Sharma, Neeraj Sinha, Sushil Singh, and Mainak Das, “Electricity from the Silk Cocoon Membrane”, Scientific Reports, Vol. 4, pp. 5434, 2014 (https://doi.org/10.1038/srep05434) (Impact factor: 4.379)

  28. Vinay Kumar Patel, Jayant Raj Saurav, Keshab Gangopadhyay, Shubhra Gangopadhyay, Shantanu Bhattacharya, “Combustion Characterization and Modeling of Novel Nanoenergetic Composites of Co3O4/nAl”, RSC Advances, Vol. 5, pp. 21471-21479, 2015 (https://doi.org/10.1039/C4RA14751K) (Impact factor: 3.36)

  29. Vinay Kumar Patel, Anurup Ganguli,  Rishi Kant, Shantanu Bhattacharya, “Micro-patterning of Nano-energetic Films of Bi2O3/Al for Pyrotechnics”, RSC Advances, Vol. 5, pp. 14967-14973, 2015 (https://doi.org/10.1039/C4RA15476B) (Impact factor: 3.36)

  30. Rajeev Kumar Singh, Rishi Kant, Sushant Singh, E. Suresh, Ankur Gupta, Shantanu Bhattacharya, “A novel helical micro-valve for embedded micro-fluidic applications”, Microfluidics and Nanofluidics, Volume 19, pp. 19–29, 2015 (https://doi.org/10.1007/s10404-015-1543-y) (Impact factor: 2.54)

  31. Ankur Gupta, Kunal Mondal, Ashutosh Sharma, Shantanu Bhattacharya, “Superhydrophobic Polymethylsilisesquoxane pinned one dimensional ZnO nanostructures for water remediation through photo-catalysis”, RSC Advances, Vol. 5, pp. 45897, 2015 (https://doi.org/10.1039/C5RA02938D) (Impact factor: 3.36)

  32. Ankur Gupta, D. Singh, P. Raj, Himanshu Gupta, S. Verma, Shantanu Bhattacharya, “Antimicrobial investigation of ZnO- Hydroxyapatite Nanocomposite (HAP) nanocomposites for biomedical applications”, Journal of Bionanosciences, Vol. 9, pp. 190-196(7), 2015 (https://doi.org/10.1166/jbns.2015.1299) (Impact factor: 0.97)

  33. Ankur Gupta, Jayant Raj Saurav, Shantanu Bhattacharya, “Solar light-based degradation of organic pollutants using ZnO nanobrushes for water filtration”, RSC Advances, Vol. 5, pp. 71472, 2015 (https://doi.org/10.1039/C5RA10456D) (Impact factor: 3.36)

  34. V.K. Patel, Deepak Singh, Ankur Gupta, Rishi Kant, and Shantanu Bhattacharya, “Surface functionalization to mitigate fouling of biodevices: A critical review”, Reviews of Adhesion and Adhesives, Vol. 3, No. 4, 2015 (http://dx.doi.org/10.7569/RAA.2015.097309) (Impact factor: 0.96)

  35. Ankur Gupta, Shubhra Gangopadhyay, Keshab Gangopadhyay, Shantanu Bhattacharya, “Palladium-Functionalized Nanostructured Platforms for Enhanced Hydrogen Sensing”, Nanomaterials and Nanotechnology, Jan. 2016, (https://doi.org/10.5772%2F63987) (Impact factor: 2.30)

  36. Thimmappa Shetty Guruprasad, Shantanu Bhattacharya, Sumit Basu, “Size effect in microcompression of polystyrene micropillars”, Polymers, Vol. 98, pp. 118-128, 2016 (https://doi.org/10.1016/j.polymer.2016.06.010) (Impact factor: 4.43)

  37. Vinay Kumar Patel, Poonam Sundriyal, Shantanu Bhattacharya, “Aloe-vera vs. poly(ethylene)glycol-based synthesis and relative catalytic activity investigations of ZnO nanorods in thermal decomposition of potassium perchlorate”, Particulate Science and Technology, Volume 35, 3, pp. 361-368, 2016 (https://doi.org/10.1080/02726351.2016.1163299) (Impact factor: 2.356)

  38. Seema D. Yardi, Ankur Gupta, Poonam Sundriyal, Geeta Bhatt, Rishi Kant, D. Boolchandani, Shantanu Bhattacharya, “High efficiency coupling of optical fibres with SU8 micro-droplet using laser welding process”, Laser in Manufacturing and Materials Processing, Volume 3, pp. 141–157, 2016 (https://doi.org/10.1007/s40516-016-0027-6) (Impact factor: 1.67)

  39. Sanjay Kumar, Pulak Bhushan, and Shantanu Bhattacharya, “Development of a paper-based analytical device for colorimetric detection of uric acid using gold nanoparticles–graphene oxide (AuNPs–GO) conjugates”, Analytical Methods, Vol. 8, pp. 6965-6973, 2016 (https://doi.org/10.1039/C6AY01926A) (Impact factor: 2.896)

  40. Ankur Gupta, Deepak Singh, Shantanu Bhattacharya, “Surface modification strategies for nanobiodevices”, Reviews   of   Adhesion   and   Adhesives, Vol. 4, No. 2, pp. 166-191, 2016 (10.7569/RAA.2016.097307) (Impact factor: 0.96)

  41. Rishi Kant, Deepak Singh, Shantanu Bhattacharya, “Digitally controlled portable micropump for transport of live microorganism”, Sensors and Actuators A: Physical, Vol. 265, pp. 138-151, 2017 (https://doi.org/10.1016/j.sna.2017.05.016) (Impact factor: 3.407)

  42. Poonam Sundriyal, Shantanu Bhattacharya, “Polyaniline silver nanoparticle coffee waste extracted porous graphene oxide nanocomposite structures as novel electrode material for rechargeable batteries”, Material Research Express, Vol. 43, No.03, pp. 035501, 2017 (https://doi.org/10.1088/2053-1591/aa5ece) (Impact factor: 1.618)

  43. Pankaj Singh Chauhan, Shantanu Bhattacharya, “Vanadium Pentoxide Nanostructures for Sensitive Detection of Hydrogen Gas at Room Temperature”, Journal of Energy and Environmental Sustainability, Vol. 2, pp. 69-74, 2017 (http://dx.doi.org/10.47469/JEES.2016.v02.100022) (Impact factor: 2.945)

  44. Pankaj Singh Chauhan, Ashutosh Rai, Ankur Gupta, Shantanu Bhattacharya, “Enhanced Photocatalytic performance of vertically grown ZnO nanorods with doping of noble metal (Al, Ag, Au, and Au-Pd) nanoparticles for degradation of industrial dye”, Material Research Express, Vol. 4, No. 5, pp. 055004, 2017 (https://doi.org/10.1088/2053-1591/aa6d31) (Impact factor: 1.618)

  45. Geeta Bhatt, Rishi Kant, Kuldeep Yadav, Keerti Mishra, Deepak Singh, R. Gurunath, Shantanu Bhattacharya, “Impact of surface roughness on dielectrophoretically assisted concentration of microorganisms over PCB based platforms”, Biomedical Microdevices, Vol. 19, No. 28, 2017 (https://doi.org/10.1007/s10544-017-0172-5) (Impact factor: 2.327)

  46. Sanjay Kumar, Pulak Bhushan, Shantanu Bhattacharya, “Facile Synthesis of Au@Ag-Hemin Decorated Reduced Graphene Oxide Sheets: A Novel Peroxidase Mimetic for Ultrasensitive Colorimetric Detection of Hydrogen Peroxide and Glucose”, RSC advances, Vol. 7, pp. 37568-37577, 2017 (https://doi.org/10.1039/C7RA06973A) (Impact factor: 3.36)

  47. Vinay Kumar Patel, Shantanu Bhattacharya, “Solid state green synthesis and catalytic activity of CuO nanorods in thermal decomposition of potassium periodate”, Material Research Express, Vol. 4, No. 9, 2017 (https://doi.org/10.1088/2053-1591/aa8822) (Impact factor: 1.618)

  48. Poonam Sundriyal, Shantanu Bhattacharya, “Inkjet-Printed Electrodes on A4 Paper Substrates for Low-Cost, Disposable, and Flexible Asymmetric Supercapacitors”, ACS applied materials and interfaces, Vol. 9, No. 44, pp. 38507–38521, 2017 (https://doi.org/10.1021/acsami.7b11262) (Impact factor: 9.229)

  49. Rishi Kant, Himanshu Singh, and Shantanu Bhattacharya, “Nanoscale Etching of Particles in Continuous Flow Reactor”, Journal of Nanoscience and Nanotechnology, Vol. 17, No. 8, pp. 5241-5251, 2017 (https://doi.org/10.1166/jnn.2017.13835) (Impact factor: 1.354)

  50. Kapil Manoharan, Shantanu Bhattacharya, “Super-hydrophobic Surfaces Review: Functional Application, Fabrication Techniques and Limitations”, Journal of Micro-manufacturing, Vol. 2, No.1, pp. 59- 78, 2017 (https://doi.org/10.1177%2F2516598419836345) (Impact factor: 0.359)

  51. Pankaj Singh Chauhan, Shantanu Bhattacharya, “Highly sensitive V2O5.1.6H2O nanostructures for sensing of Helium gas at room temperature”,   Material Letters, Volume 217, pp. 83-87, 2018 (https://doi.org/10.1016/j.matlet.2018.01.056) (Impact factor: 3.423)

  52. Vinay Kumar Patel, Pradyumna Kumar, Shantanu Bhattacharya, “Mechanical, Micro-structural and Sliding Wear Properties of Friction Stir Welded AA6063-T6 and AA5052-H32 Aluminum Alloys”, Material Focus, Vol. 7, No. 1, pp. 50-58, 2018 (https://doi.org/10.1166/mat.2018.1475)

  53. Sanjay Kumar, Pulak Bhushan, Om Prakash, and Shantanu Bhattacharya, “Double negative acoustic metastructure for attenuation of acoustic emissions”, Applied Physics Letters Vol. 112, No. 10: 101905, 2018 (https://doi.org/10.1063/1.5022602) (Impact factor: 3.791)

  54. Sanjay Kumar, Pulak Bhushan, Vinay Krishna and Shantanu Bhattacharya, “Tapered lateral flow immunoassay-based point-of-care diagnostic device for ultrasensitive colorimetric detection of dengue NS1”, Biomicrofluidics, Vol. 12, No. 3, 034104, 2018 (https://doi.org/10.1063/1.5035113) (Impact factor: 2.8)

  55. Sanjay Kumar, Pulak Bhushan and Shantanu Bhattacharya, “Ultrathin Ashoka Chakra like acoustic metastructure as a sound absorber”, The Journal of the Acoustical Society of America, Vol. 143, No. 1714, 2018 (https://doi.org/10.1121/1.5035581) (Impact factor: 1.84)

  56. Ankur Gupta and Shantanu Bhattacharya, “On the growth mechanism of ZnO nano structure via aqueous chemical synthesis”, Applied Nanoscience, Vol. 8, pp. 499–509, 2018 (https://doi.org/10.1007/s13204-018-0782-0) (Impact factor: 3.674)

  57. Sanjay Kumar, Pulak Bhushan, and Shantanu Bhattacharya, “Sound absorption through PDMS-based flexible perforated plate backed by a dual layer cavity”, The Journal of the Acoustical Society of America, Vol. 144, No. 1847, 2018 (https://doi.org/10.1121/1.5068135) (Impact factor: 1.84)

  58. Jitender Singh and Shantanu Bhattacharya, “Fabrication of Micro-mixer on printed circuit board using Electrochemical Micromachining”, Journal of Micromanufacturing, Vol. 2, No. 2, pp. 85-94, 2019 (https://doi.org/10.1177%2F2516598419838660) (Impact factor: 0.359)

  59. Vinay Kumar Patel, Rishi Kant, Anu Choudhary, Madhusudan Painuly, Shantanu Bhattacharya, “Performance Characterization of Bi2O3/Al nanoenergetics Blasted Micro-forming System”, Defense Technologies, Volume 15, Issue 1, pp. 98-105, 2019 (https://doi.org/10.1016/j.dt.2018.07.005) (Impact factor: 3.172)

  60. Sanjay Kumar, Pulak Bhushan, Shantanu Bhattacharya, “Investigation of structure- mechanical property relationship in fused filament fabrication of the polymer composites”, Journal of Micro-manufacturing, Vol. 2, No. 2, pp. 167-174, 2019 (https://doi.org/10.1177%2F2516598419843687) (Impact factor: 0.359)

  61. Pankaj Singh Chauhan, Rishi Kant, Ashutosh Rai, Ankur Gupta, Shantanu Bhattacharya, “Facile synthesis of ZnO/GO nano flowers over Si substrate for improved photocatalytic decolorization of MB dye and industrial wastewater under solar irradiation”, Materials Science in Semiconductor Processing, Vol. 89, pp. 6-17, 2019 (https://doi.org/10.1016/j.mssp.2018.08.022) (Impact factor: 3.927)

  62. Poonam Sundriyal and Shantanu Bhattacharya, “Scalable Micro-fabrication of Flexible, Solid-State, Inexpensive, and High-Performance Planar Micro-supercapacitors through Inkjet Printing”, ACS Applied Energy Materials, Vol. 2, No. 3, pp. 1876–1890, 2019 (https://doi.org/10.1021/acsaem.8b02006) (Impact factor: 6.024)

  63. Geeta Bhatt, Keerti Mishra, Gurunath Ramanathan, Shantanu Bhattacharya, “Dielectrophoresis assisted impedance spectroscopy for detection of gold-conjugated amplified DNA samples”, Sensors and Actuators B: Chemical, Vol. 288, No. 1, pp. 442-453, 2019 (https://doi.org/10.1016/j.snb.2019.02.081) (Impact factor: 7.460)

  64. Rishi Kant, Geeta Bhatt, Vinay K. Patel, Anurup Ganguly, Deepak Singh, Monalisha Nayak, Keerti Mishra, Ankur Gupta, Keshab Gangopadhyay, Shubhra Gangopadhyay, R. Gurunath, Shantanu Bhattacharya, “Synchronized electro-mechanical shock wave induced bacterial transformation”, ACS Omega, Vol. 4, No. 5, pp. 8512–8521, 2019 (https://doi.org/10.1021/acsomega.9b00202) (Impact factor: 3.512)

  65. Aviru Kumar Basu, Pankaj Singh Chauhan, Shantanu Bhattacharya, “α-Fe2O3 loaded rGO nanosheets based fast response/recovery CO Gas sensor at Room Temperature”, Applied Surface Science, Volume 465, pp. 56-66, 2019 (https://doi.org/10.1016/j.apsusc.2018.09.123) (Impact factor: 6.707)

  66. Ankur Gupta, Poonam Sundriyal, Aviru Basu, Kapil Manoharan, Rishi Kant and Shantanu Bhattacharya, “Nano-finishing of MEMS-based platforms for optimum optical sensing”, Journal of Micro-manufacturing, Vol. 3, No.1, pp. 39-53, 2019 (https://doi.org/10.1177%2F2516598419862676) (Impact factor: 0.359)

  67. Aviru Kumar Basu, Amar Nath Sah, Asima Pradhan and Shantanu Bhattacharya, “Poly-L-Lysine functionalised MWCNT-rGO nanosheets based 3-d hybrid structure for femtomolar level cholesterol detection using cantilever-based sensing platform”, Scientific Reports, Vol. 9, No. 3686, 2019 (https://doi.org/10.1038/s41598-019-40259-5) (Impact factor: 4.379)

  68. Ankur Gupta, Geeta Bhatt and Shantanu Bhattacharya, “Novel Dipstick model for Portable Bio-sensing Application”, Journal of Energy Environment and Sustainability, Vol. 7, pp. 36-41, 2019 (http://dx.doi.org/10.47469/JEES.2019.v07.100075) (Impact factor: 2.945)

  69. Sanjay Kumar, Pulak Bhushan, Shantanu Bhattacharya, “Additive Manufacturing as an Emerging Technology for Fabrication of Microelectromechanical Systems (MEMS): A Review, Journal of Micromanufacturing, Vol. 2, No. 2, pp. 175-197, 2019 (https://doi.org/10.1177%2F2516598419843688) (Impact factor: 0.359)

  70. Geeta Bhatt and Shantanu Bhattacharya, “Biosensors on chip: A critical review from an aspect of micro/nanoscales”, Journal of Micromanufacturing, Vol. 2, No. 2, pp. 198-219, 2019 (https://doi.org/10.1177%2F2516598419847913) (Impact factor: 0.359)

  71. Pankaj Singh Chauhan, Shantanu Bhattacharya, "Hydrogen gas sensing methods, materials, and approach to achieve parts per billion level detection: A review." International Journal of Hydrogen Energy, Volume 44, Issue 47, pp. 26076-26099, 2019 (https://doi.org/10.1016/j.ijhydene.2019.08.052) (Impact factor: 5.816)

  72. Aviru Basu, Anup Basak and Shantanu Bhattacharya, “Geometry and thickness dependent anomalous mechanical behavior of fabricated SU-8 thin film micro-cantilevers”, Journal of Micromanufacturing, Vol. 3, No. 2, pp. 113-120, 2020 (https://doi.org/10.1177%2F2516598419862676) (Impact factor: 0.359)

  73. Shantanu Bhattacharya, Sanjay Kumar, Sanjeet Kumar Singh, Pulak Bhushan, Megha Sahu, Om Prakash, “Ashok chakra-structured meta-structure as a perfect sound absorber for broadband low-frequency sound”, Applied Physics Letters, Vol. 117, 191901, 2020 (https://doi.org/10.1063/5.0022998) (Impact factor: 3.791)

  74. Poonam Sundriyal and Shantanu Bhattacharya, “Textile-based supercapacitors for flexible and wearable electronic applications”, Scientific Reports, Vol. 10, No. 13259, 2020 (https://doi.org/10.1038/s41598-020-70182-z) (Impact factor: 4.379)

  75. Aviru Kumar Basu, Amar Nath Sah, Mayank Manjul Dubey, Prabhat K. Dwivedi, Asima Pradhan, Shantanu Bhattacharya, “MWCNT and α-Fe2O3 embedded rGO-nanosheets based hybrid structure for room temperature chloroform detection using fast response/recovery cantilever-based sensors”, Sensors and Actuators, B: Chemical, Vol. 305, 127457, 2020 (https://doi.org/10.1016/j.snb.2019.127457) (Impact factor: 7.460)

  76. Shailendra Singh, Shantanu Bhattacharya, Venkataramanaiah Saddikuti, “An application of AHP and fuzzy AHP with sensitivity analysis for selecting the right process to impart knowledge”, International Journal of Knowledge Management Studies, Vol.11, No.3, pp.258 - 277, 2020 (https://dx.doi.org/10.1504/IJKMS.2020.109091) (Impact factor: 0.57)

  77. Aviru Kumar Basu, Adreeja Basu, Shantanu Bhattacharya, "Micro/Nano Fabricated Cantilever Based Biosensor Platform: A review and recent progress" Enzyme and Microbial Technology, Volume 139, No. 109558, 2020 (https://doi.org/10.1016/j.enzmictec.2020.109558) (Impact factor: 3.493)

  78. Poonam Sundriyal, Mohit Pandey, Shantanu Bhattacharya, "Plasma-assisted surface alteration of industrial polymers for improved adhesive bonding." International Journal of Adhesion and Adhesives, Volume 101, No. 102626, 2020 (https://doi.org/10.1016/j.ijadhadh.2020.102626) (Impact factor: 3.189)

  79. Shreyansh Tatiya, Mohit Pandey, Shantanu Bhattacharya, “Nanoparticles containing boron and its compounds: synthesis and applications - A review, Journal of Micro-manufacturing, Vol. 3, No. 2, pp. 159-173, 2020 (https://doi.org/10.1177%2F2516598420965319) (Impact factor: 0.359)

  80. Geeta Bhatt, Swati Gupta, Gurunath Ramanathan, Shantanu Bhattacharya, “Integrated DEP assisted detection of PCR products with metallic nanoparticle labels through impedance spectroscopy, IEEE Transactions on Nanobioscience, 2021 (https://doi.org/10.1109/TNB.2021.3127111) (Impact factor: 2.935)

  81. Meenaxi Sharma, Shivam Gupta, Bidisha Bhatt, Geeta Bhatt, Shantanu Bhattacharya, Krishnacharya Khare, “Anisotropic Motion of Aqueous Drops on Lubricated Chemically Heterogenous Slippery Surfaces”, Advanced Materials Interfaces, Vol. 8, 2021 (https://doi.org/10.1002/admi.202001916) (Impact factor: 6.147)

  82. Anubhuti Saha, Ashutosh Bajpai, Vinay Krishna, Shantanu Bhattacharya, “Evolving paradigm of prothrombin time diagnostics with its growing clinical relevance towards cardio-compromised and COVID-19 affected population”, Sensors, Vol. 21, No. 8, 2636, 2021 (https://doi.org/10.3390/s21082636) (Impact factor: 3.576)

  83. Poonam Sundriyal, Megha Sahu, Om Prakash, Shantanu Bhattacharya, “Long-term surface modification of PEEK polymer using plasma and PEG silane treatment”,    Surfaces and Interfaces, Vol. 25, 101253, 2021 (https://doi.org/10.1016/j.surfin.2021.101253) (Impact factor: 4.837)

  84. Kapil Manoharan, Mohd. Tahir Anwar, Shantanu Bhattacharya, “Development of hydrophobic paper substrates using silane and sol-gel based processes and deriving the best coating technique using machine learning strategies”, Scientific reports, Vol. 11, pp. 1-12, No. 11352, 2021 (https://doi.org/10.1038/s41598-021-90855-7) (Impact factor: 4.379)

  85. Pankaj Singh Chauhan, Aniket Mishra, Geeta Bhatt, Shantanu Bhattacharya, “Enhanced He gas detection by V2O5-noble metal (Au, Ag, and Pd) nanocomposite with temperature dependent n-to p-type transition”, Materials Science in Semiconductor Processing, Vol. 123, pp. 105528, 2021 (https://doi.org/10.1016/j.mssp.2020.105528) (Impact factor: 3.927)

  86. Eshan Sadasivan, Kapil Manoharan, Mainak Das and Shantanu Bhattacharya, “Sustainable product development through innovation for social impact”, International Journal for sustainable design, Vol. 4, No. 2, pp. 85-118, 2022.

  87. Pankaj Singh Chauhan, Kuldeep Kumar, Kirtiman Singh, Shantanu Bhattacharya, “Fast decolorization of rhodamine-B dye using novel V2O5-rGO photocatalyst under solar irradiation”, Synthetic Metals, Vol. 283, No. 116981, 2022 (https://doi.org/10.1016/j.synthmet.2021.116981) (Impact factor: 3.266)

  88. Sanjeet Kumar, Om Prakash, Shantanu Bhattacharya, “Novel fractal acoustic metamaterials (FAM) for multiple narrow band near perfect absorption”, Journal of applied physics, DOI: 10.1063/5.0093128, 2022.

  89. Sanjeet Kumar, Om Prakash, Shantanu Bhattacharya, “Hybrid fractal acoustic metamaterials for low-frequency sound absorber based on cross mixed micro-perforated panel mounted over the fractals structure cavity", Scientific Reports, under review, 2022.

  90. Pankaj Singh Chauhan, Aditya Chaudhury, Kirtiman Singh, S.K. Singh, Urmila Bhrigu, Shantanu Bhattacharya, “"Development of Energy-Efficient Wastewater Treatment Plant using Advanced Oxidation Process with Data-driven Predictive Performance Modeling", 2022, NPJ Clean water (Nature), Under Review.

  91. Jitender Singh, Rishi Kant, Shantanu Bhattacharya, “Micro-hole drilling on vertical surfaces by ECMM: Experimental and theoretical insights”, CIRP Journal of manufacturing science and technology, Under Review, 2022.

  92. Kapil Manoharan, Shantanu Bhattacharya, “Rotational Magneto Abrasive Flow Finishing of Cylindrical Double Camshaft Followers powered with Machine Learning Tools”, Advances in materials processing and technologies, Under Review 2022.

  93. Eshan Sadasivan, Shantanu Bhattacharya, “Social Innovation and Social Entrepreneurship Review: Challenges in Indian Social Entrepreneurial Eco-System”, 2022, Asian Journal of Sustainability, Under review.

  94. Eshan Sadasivan, Kapil Manoharan, Shantanu Bhattacharya, “Rural employment through product development: Entrepreneurial framework for grassroot level innovations”, Journal of Knowledge Economy, 2022, Under review.

  95. Rashik Mohhammed, Kapil Manoharan, Jasmine Samal, Ekta Gupta, Shantanu Bhattacharya, “Performance evaluation of a rapid dengue NS1 antigen lateral flow immunoassay test with reference to dengue NS1 antigen-capture ELISA”, Manuscript under processing, 2022.

  1. Rishi Kant, Geeta Bhatt, Vinay K. Patel, Anurup Ganguly, Deepak Singh, Monalisha Nayak, Keerti Mishra, Ankur Gupta, Keshab Gangopadhyay, Shubhra Gangopadhyay, R. Gurunath, Shantanu Bhattacharya, “Synchronized electro-mechanical shock wave induced bacterial transformation”, ACS Omega, Vol. 4, No. 5, pp. 8512–8521, 2019 (https://doi.org/10.1021/acsomega.9b00202) (Impact factor: 3.512)
  2. Vinay Kumar Patel, Anurup Ganguli,  Rishi Kant, Shantanu Bhattacharya, “Micro-patterning of Nano-energetic Films of Bi2O3/Al for Pyrotechnics”, RSC Advances, Vol. 5, pp. 14967-14973, 2015 (https://doi.org/10.1039/C4RA15476B) (Impact factor: 3.36)
  3. Gupta, Ankur, Shubhra Gangopadhyay, Keshab Gangopadhyay, and Shantanu Bhattacharya. "Palladium-functionalized nanostructured platforms for enhanced hydrogen sensing." Nanomaterials and Nanotechnology 6 (2016): 40.
  4. Patel, Vinay Kumar, Jayant Raj Saurav, Keshab Gangopadhyay, Shubhra Gangopadhyay, and Shantanu Bhattacharya. "Combustion characterization and modeling of novel nanoenergetic composites of Co 3 O 4/nAl." RSC Advances 5, no. 28 (2015): 21471-21479.
  5. Gupta, Ankur, Abhinav Srivastava, Cherian Joseph Mathai, Keshab Gangopadhyay, Shubhra Gangopadhyay, and Shantanu Bhattacharya. "Nano porous palladium sensor for sensitive and rapid detection of hydrogen." Sensor Letters 12, no. 8 (2014): 1279-1285.
  6. Bhattacharya, Shantanu, Rajeev Kr Singh, Swarnasri Mandal, Arnab Ghosh, Sangho Bok, Venumadhav Korampally, Keshab Gangopadhyay, and Shubhra Gangopadhyay. "Plasma modification of polymer surfaces and their utility in building biomedical microdevices." Journal of Adhesion Science and Technology 24, no. 15- 16 (2010): 2707-2739.
  7. Koo, Ok Kyung, YiShao Liu, Salamat Shuaib, Shantanu Bhattacharya, Michael R. Ladisch, Rashid Bashir, and Arun K. Bhunia. "Targeted capture of pathogenic bacteria using a mammalian cell receptor coupled with dielectrophoresis on a biochip." Analytical chemistry 81, no. 8 (2009): 3094-3101.
  8. Gao, Yuanfang, Shantanu Bhattacharya, Xiaohui Chen, Syed Barizuddin, Shubhra Gangopadhyay, and Kevin D. Gillis. "A microfluidic cell trap device for automated measurement of quantal catecholamine release from cells." Lab on a Chip 9, no. 23 (2009): 3442-3446.
  9. Bhattacharya, Shantanu, Nripen Chanda, Yi-Shao Liu, Sheila A. Grant, Keshab Gangopadhyay, Paul R. Sharp, Rashid Bashir, and Shubhra Gangopadhyay. "Enhanced DNA Separation Rates in Nano-Platinum Doped Agarose." Journal of Bionanoscience 2, no. 2 (2008): 67-74.
  10. Bhattacharya, Shantanu, Deb Gangopadhyay, Nripen Chanda, Sheila A. Grant, Yishao Liu, Paul R. Sharp, Rashid Bashir, Keshab Gangopadhyay, and Shubhra Gangopadhyay. "Low Voltage Capillary Electrophoresis Using High Conductivity Agarose Nano-Platinum Composites." Sensor Letters 6, no. 5 (2008): 778-783.
  11. Bok, Sangho, Arnold A. Lubguban, Yuanfang Gao, Shantanu Bhattacharya, Venu Korampally, Maruf Hossain, Rajagopalan Thiruvengadathan, Kevin D. Gillis, and Shubhra Gangopadhyay. "Electrochemical properties of carbon nanoparticles entrapped in a silica matrix." Journal of the Electrochemical Society 155, no. 5 (2008): K91-K95.
  12. Liu, Yi-Shao, Padmapriya P. Banada, Shantanu Bhattacharya, Arun K. Bhunia, and Rashid Bashir. "Electrical characterization of DNA molecules in solution using impedance measurements." Applied Physics Letters 92, no. 14 (2008): 143902.
  13. Bhattacharya, Shantanu, Shuaib Salamat, Dallas Morisette, Padmapriya Banada, Demir Akin, Yi-Shao Liu, Arun K. Bhunia, Michael Ladisch, and Rashid Bashir. "PCR- based detection in a micro-fabricated platform." Lab on a Chip 8, no. 7 (2008): 1130- 1136.
  14. Bhattacharya, Shantanu, Yuanfang Gao, Venumadhav Korampally, Maslina T. Othman, Sheila A. Grant, Steven B. Kleiboeker, Keshab Gangopadhyay, and Shubhra Gangopadhyay. "Optimization of design and fabrication processes for realization of a PDMS-SOG-silicon DNA amplification chip." Journal of microelectromechanical systems 16, no. 2 (2007): 401-410.
  15. Hossain, Maruf, Senthil Subramanian, Shantanu Bhattacharya, Yuanfang Gao, Steve Apperson, Rajesh Shende, Suchi Guha et al. "Crystallization of amorphous silicon by self-propagation of nanoengineered thermites." Journal of Applied Physics 101, no. 5 (2007): 054509.
  16. Bhattacharya, Shantanu, Jaesung Jang, Liju Yang, Demir Akin, and Rashid Bashir. "BioMEMS and nanotechnology‐based approaches for rapid detection of biological entities." Journal of Rapid Methods & Automation in Microbiology 15, no. 1 (2007): 1-32.
  1. Flow Visualization Experiment for a First Course in Micro-fluidics, Proc. ASEE (2003), University of Texas at Arlington, TX, United States of America, 2003.
  2. Self- assembled Ordered Energetic Composites of CuO nanorods and nanowells and Aluminum nanoparticles with High Burn rates, Proc. MRS (2005), Vol. 896E, Boston, MA, United States of America, 2005.
  3. On-Chip Initiation and Burn Rate Measurements of Thermite Energetic Reactions, Proc. MRS (2005), Vol. 896H, Boston, MA, United States of America, 2005.
  4. Optimization of fabrication process for a PDMS-SOG-Silicon based PCR microchip through system identification techniques          Proc. 19th IEEE Symposium on Computer-Based Medical Systems (CBMS'06), pp. 329-334, Salt Lake City, Utah, May 2006.
  5. Detection of Foodborne Pathogenic Bacteria by Dielectrophoresis Enhanced Immunoassay in Biochips Proc. MicroTAS, The 11th international conference for chemistry and lifesciences, 7-11 October 2007, Paris, France, 2007.
  6. A novel replica molding process for realizing three dimensional microchannels within soft materials Proc., ICMEMS-2009, Indian Institute of Technology-Chennai, India. 2009.
  7. Biochip for fluorescence-based quantitation of fluorescent microbeads Proc., ICMEMS-2009, Indian Institute of Technology-Chennai, India. 2009.
  8. Dielectrophoretic Separation of Nanoparticle Conjugated Bacterial Cells within Micro-Scale Architecture            Proc. AICHE-2009, 72H, Annual Meeting of the American Electrophoresis Society, Nashville, Tenessee, United States of America. 2009.
  9. Electrophoretic Transport of Nucleic Acids through Nano Structured Surfaces           Proc. AICHE-2009, 306C, Electrokinetic Behavior of Micro and Nanoparticles: Fundamentals and Applications, Nashville, Tenessee, United States of America. 2009.
  10. Flow rotation due to Bilayer staggered herringbone structures with symmetric and asymmetric geometries across micro-channels.Proc. COMSOL-2010, held at Bangalore, India. 2010.
  11. A novel replica molded solenoidal microvalve for control of miniaturized flow volumes Proc. RAMEMS-2011, held at IT-BHU, Banaras, India, pp 122-125, March 7-9, 2011.
  12. A novel soft lithography based peristaltic micro-pump.           Proc. RAMEMS-2011, held at IT-BHU, Banaras, India, pp 126-128, March 7-9, 2011.
  13. Passive vibration damping with microstructured viscoelastic laminates.          Proc. RAMEMS-2011, held at IT-BHU, Banaras, India, pp 138-140, March 7-9, 2011.
  14. A novel microchip platform to perform real time Polymerase Chain Reaction            Proc. ISSS-2012, held at IISC-Bangalore, India, January 4-7th, 2012.
  15. Fabrication and Optimization of CO2 Laser Machined Photo Mask for Photo lithography process     Proc. International Conf. on Innovations in Design and Manufacturing, Jabalpur, India, (December 5-7,2012).
  16. High aspect ZnO nano structures-based Hydrogen sensing, Proc. International conference on recent trends in Applied Physics and material Science, Bikaner, India (February 1-3, 2013).
  17. Effect of Oxidizer Morphology on Combustion Characteristics of Nanoenergetic Materials of CuO/Al            , Proc. International Conference on recent trends in Applied Physics and material Science, Bikaner, India (February 1-3, 2013).
  18. Polymer Waveguide and Optical Fiber Coupling Using Whispering Gallery Modes in an Elliptical Micro- Sleeve Optical Trapping Applications, Waikoloa Beach, Hawaii United States, The Optical Society, April 14-18, 2013ISBN: 978-1-55752-966-4, 2014.
  19. Studies on CO2 laser micromachining on PMMA to fabricate micro channel for microfluidic applications, Proc.  AIMTDR to be held in IIT Guwahati, India 2014.
  20. Antibody immobilization over ZnO nanobundles for biosensing applications Materials research society (MRS)spring Proceedings, San Francisco, California, USA, (April 21st -25th, 2014), 1675, mrss14-1675-k14-09 doi:10.1557/opl.2014.848, 2014.
  21. Porous Polydimethyl Siloxane (PDMS)- Acrydine Orange (AO) as a biomaterial in opto-bio-sensing international symposium on metallurgy, material science and engineering, ISRS-2014, Dec. 2014, IIT Madras,.2014.
  22. Antimicrobial investigation of ZnO-HAP nanocomposites, Proceeding of the 2nd international material, industrial and manufacturing conference, February 2015, Bali, Indonesia.
  23. Synthesis and characterization of energetic nanomaterials and their utility in gene delivery applications            Proceedings of International Conference on advances in Micro/nano technologies, August 2015, PSG Tech, Coimbatore, India.
  24. Fabrication and resilience measurement of thin aluminium cantilevers using scanning probe microscopy              Proceedings of 3rd International Conference C2E2, IEEE, Mankundu, West Bengal, India, 15th-16th January 2016.
  25. Design for Communities: An entrepreneurial approach to solve the problems of society and environment fuelled by product design        ICORD-2016, Accepted, to be held in South Africa, Cape Town, October 2016.
  26. Enhancement of photocatalysing of water having organic impurities using gold and platinum plated Zno nanofibres.      Proceedings of AIMTDR-2016, Presented in College of Engineering, Pune, December 2016, pg: 1620-1623.
  27. Design and Development of a study companion for rural students in India     IEEE Region 10 Humanitarian Technology Conference, Dayalbagh, Agra. December -2016.
  28. Influence of MnC2O4 microadditives on combustion characteristics of CuO/Al nanoenergeticsProceedings of international conference on condensed matter and applied physics (ICC), May-2016, DOI: 10.1063/1.4946171.
  29. Positively Charged Silver Nano-particles as Labels for Paper-Based Colorimetric Detection of Heparin, Proceedings of International Conference for Innovation in Biomedical Engineering and Life Sciences, Singapore, December 2017, pg. 235-240.
  30. Synthesis, Characterization and Gas Sensing study for Different Shapes of V2O5 Nanostructures International conference on advanced materials, Trivendrum India, December 2017.
  31. Fabrication and Resilience measurement of thin Aluminium cantilevers using scanning probe microscopy, IEEE, C2E2 2016, Kolkata, CRC Press, Taylor and Francis, 2016.
  32. Grey scale Lithography based fabrication of thin polymeric cantilevers for MEMS/NEMS Applications (FMFP, IIT Bombay, 2018).
  33. BSA detection on Polymeric Nanocantilevers, Flame, Amity University, Noida (Springer, 2019).
  34. pH induced conformational changes on polymeric nanocantilevers, ICNMS, AIP Conference Proceedings, San Francisco, USA, 2019.
  35. Electrochemical Analysis of the Printed NiCo2O4//Reduced Graphene Oxide Solid-State Hybrid Supercapacitors on Fabric Substrates for Wearable Applications. The Electrochemical Society, USA, 2019.
  36. Inkjet Printing based Micro-manufacturing of the Thin-film Electrodes for Flexible      Supercapacitor Applications, AIMTDR, Chennai, India, December- 2018.
  37. Hemin (Fe+3-porphyrin) anchored V2O5 nanowires for solar light based photocatalytic decolourization of MB dye and Industrial wastewater', International Conference on Advances in Functional Materials, University of California, Los Angeles Campus, 2019.
  38. An inexpensive and robust PCB platform for molecular diagnostics, Advances in Functional Materials Conference AAAFM-UCLA, 19-22 Aug, 2019, Los Angeles, USA.
  39. Dielectrophoretic particle separation on inexpensive PCB platform, International Conference on Applied Surface Science, 17-20 June 2019, Pisa, Italy.
  40. Microfabricated PCB Platform for the Sensitive Concentration of Bacterial Cells Using Chemical Etching, Proceedings of the 7th International and 45th National Conference on Fluid Mechanics and Fluid Power (FMFP) December 10-12, 2018, IIT Bombay, Mumbai,India.
  41. Enhanced fluorescence-based detection of Vibrio cells over nanoporous silica substrate, International Conference on Future Learning Aspects of Mechanical Engineering (FLAME - 2018) 3-5 October, 2018, Amity University, Noida, India.
  42. Inkjet printing- assisted growth of Ni2CO3 nanorods over fabric substrates for flexible and wearable supercapacitor applications, International Conference on Advances in Functional Materials, University of California, Los Angeles Campus, 2019.
  43. Gas sensors for strategic applications, International Conference on Energy Environment and Sustainability, NEERI Nagpur, India, 2019.
  44. Invited Award talk (for NASI Reliance Platinum Jubilee Award 2019) at 89th Annual Session of the National Academy of Sciences, India (NASI), ICAR-NAARM, Hyderabad, 2019.
  45. Invited Talk, “Semiconductor materials and their use as Photocatalyst” presented at MIPP (A), Conference at University of Melbourne, Australia, 2019.
  46. Sanjeet Kumar Singh, Shantanu Bhattacharya, “Flat Fresnel-spiral acoustic metamaterials composed of several arms ventilated metamaterials for simultaneous broadband sound absorption and air circulation”, full paper accepted in the 51st International Congress and Exposition on Noise Control Engineering 21 – 24 August 2022 Scottish Event Campus (SEC), Glasgow, Scotland.
  1. Rishi Kant, Vinay Kumar Patel, Geeta Bhatt, Shantanu Bhattacharya, “Advances in Polymer Materials and Composites for Additive Manufacturing”, Trends in Fabrication of Polymer and Composites, 2022, page 4-1, AIP Publishing LLCAIP Publishing Melville, New York.
  2. Geeta Bhatt, Vinay Kumar Patel, Rishi Kant, Shantanu Bhattacharya, “Polymer Microfabrication for Biomedical Applications”, Trends in Fabrication of Polymer and Composites, 2022, page 5-1, AIP Publishing LLCAIP Publishing Melville, New York.
  3. Kapil Manoharan, Shantanu Bhattacharya, “Polymer Fabrication Using Photochemical Processes—A Review”, Trends in Fabrication of Polymer and Composites, 2022, page 5-1, AIP Publishing LLCAIP Publishing Melville, New York.
  4. Pandey M., M. Rashiku, S. Bhattacharya, 2021, Recent progress in the development of printed electronic devices, in: Chemical Solution Synthesis for Materials Design and Thin Film Device Applications, S. Das and S. Dhara (Eds.), pp. 349-368, Elsevier.
  5. Chauhan P. S., P. Sundriyal, S. Bhattacharya, 2021, Carbon-based materials for hydrogen storage, in: Carbon Nanostructures: Fundamentals to Applications, Thiruvengadathan R., S.C. Roy, P. Sundriyal, S. Bhattacharya (Eds.), American Institute of Physics.
  6. Manoharan K., P. Sundriyal, A. Saha, S. Bhattacharya, 2021, Fabrication and Application of Carbon Nanoscale Materials and Surfaces in Energy Storage, in: Carbon Nanostructures: Fundamentals to Applications, Thiruvengadathan R., S.C. Roy, P. Sundriyal, S. Bhattacharya (Eds.), American Institute of Physics.
  7.  Thiruvengadathan R., S.C. Roy, P. Sundriyal, S. Bhattacharya, 2021, From Fundamentals to Applications of Carbon Nanostructures: An overview, in: Carbon Nanostructures: Fundamentals to Applications, Thiruvengadathan R., S.C. Roy, P. Sundriyal, S. Bhattacharya (Eds.), American Institute of Physics.
  8. Pandey M., S. Tatiya, S. Bhattacharya, 2021, Design and Development of MEMS-Based Sensors for Wearable Diagnostic Applications, in: MEMS applications in Biology and Healthcare, Basu A.K., A. Basu, S. Ghosh, S. Bhattacharya (Eds.), American Institute of Physics.
  9. Basu A.K., A. Basu, S. Bhattacharya, 2021, Recent Trends and Progress in MemsBased Bioinspired/Biomimetic sensors, in: MEMS applications in Biology and Healthcare, Basu A.K., A. Basu, S. Ghosh, S. Bhattacharya (Eds.), American Institute of Physics.
  10. Basu A.K., A. Basu, S. Ghosh, S. Bhattacharya, Introduction to MEMS in Biology and Healthcare, in: MEMS applications in Biology and Healthcare, Basu A.K., A. Basu, S. Ghosh, S. Bhattacharya (Eds.), American Institute of Physics.
  11. Chauhan P.S., A. Choudhary, K. Saxena, S. Bhattacharya, 2021, MEMS Devices for the Measurement of Wastewater Parameters, in: MEMS applications in Biology and Healthcare, Basu A.K., A. Basu, S. Ghosh, S. Bhattacharya (Eds.), American Institute of Physics.
  12. Bhatt G. and S. Bhattacharya, 2021, Application of Various Detection Platforms for Sensitive Detection of Biological Entities, in: MEMS applications in Biology and Healthcare, Basu A.K., A. Basu, S. Ghosh, S. Bhattacharya (Eds.), American Institute of Physics.
  13. Rashiku M. and S. Bhattacharya, 2021, BioMEMS-Based Sensors for Future Diagnostic Applications, , in: MEMS applications in Biology and Healthcare, Basu A.K., A. Basu, S. Ghosh, S. Bhattacharya (Eds.), American Institute of Physics.
  14. Bhattacharya Shantanu, Agarwal A.K., Patel, V.K., Rajgopalan T., Basu A.K., Saha Anubhuti, “Introduction to Nanoenergetic materials”, In Nanoenergetic Materials, pp. 3-7, Springer, Singapore, 2019.
  15. Sundriyal Poonam, Bhattacharya Shantanu, “Recent Advancement in the Fabrication of Energy Storage Devices for Miniaturized Electronics”, In Nanoenergetic Materials, pp. 215-240, Springer, Singapore, 2019.
  16. Patel V.K., Katiyar J., Bhattacharya Shantanu, “Solid energetic materials based microthrusters for space applications” In Nanoenergetic Materials, pp. 241-250, Springer, Singapore, 2019.
  17. Bhattacharya Shantanu, Agarwal A.K., Omprakash, Singh Shailendra, Pandey Mohit and Rishi Kant, “Introduction to sensors for Aerospace and Aerospace applications”, In Sensors for automotive and aerospace applications, pp. 1-6,. Springer, Singapore, 2019.
  18. Kant Rishi, Chauhan Pankaj Singh, Bhatt Geeta and Bhattacharya Shantanu, “Corrosion Monitoring and control in aircraft: A Review”, In Sensors for automotive and aerospace applications, pp. 39-54. Springer, Singapore, 2019.
  19. Sundriyal Poonam and Bhattacharya Shantanu, “ Energy Harvesting Techniques for powering wireless sensor networks in aircraft applications: A Review”, In Sensors for automotive and aerospace applications, pp. 55-76, Springer, Singapore, 2019.
  20. Manoharan Kapil and Bhattacharya Shantanu, “Sensors used in flying”, In Sensors for automotive and aerospace applications, pp. 93-106, Springer, Singapore, 2019.
  21. Basu Aviru Kumar, Tatiya Shreyansh and Bhattacharya Shantanu, “Overview of electric vehicles and EV sensors”, In Sensors for automotive and aerospace applications, pp. 107-122, Springer, Singapore, 2019.
  22. Basu Aviru Kumar, Tatiya Shreyansh and Bhattacharya Shantanu, “Fabrication processes for sensors for automotive applications: A review”, In Sensors for automotive and aerospace applications, pp. 123-142, Springer, Singapore, 2019.
  23. Pandey Mohit, Tatiya Shreyansh, Bhattacharya Shantanu, Singh Shailendra, “Sensors in assembly shop in automobile manufacture”., In Sensors for automotive and aerospace applications, pp. 193-208, Springer, Singapore, 2019.
  24. Chauhan Pankaj Singh, Bhatt Geeta and Bhattacharya Shantanu, “Leakage Monitoring in Inflatable Space Antennas: A perspective to sensitive detection of Helium and Nitrogen Gases”, In Sensors for automotive and aerospace applications, pp. 209-222, Springer, Singapore, 2019.
  25. Bhatt Geeta, Manoharan Kapil, Chauhan Pankaj Singh, Bhattacharya Shantanu, “MEMS Sensors for automotive Applications: A review”, In Sensors for automotive and aerospace applications, pp. 223-240, Springer, Singapore, 2019.
  26. Pandey Mohit, Tatiya Shreyansh, Bhattacharya Shantanu and Singh Shailendra, “Sensors in the joining and welding process in automobile manufacturing”, In Sensors for automotive and aerospace applications, pp. 241-256, Springer, Singapore, 2019.
  27. Tatiya Shreyansh, Pandey Mohit, Bhattacharya Shantanu, Singh Shailendra, “Sensors used in automotive paint shops”, In Sensors for automotive and aerospace applications, pp. 257-264, Springer, Singapore, 2019.
  28. Rai, Ashutosh, Pankaj Singh Chauhan, and Shantanu Bhattacharya, "Remediation of Industrial Effluents." In Water Remediation, pp. 171-187. Springer, Singapore, 2018.
  29. Kumar, Sanjay, Pulak Bhushan, and Shantanu Bhattacharya. "Fabrication of Nanostructures with Bottom-up Approach and Their Utility in Diagnostics, Therapeutics, and Others." In Environmental, Chemical and Medical Sensors, pp. 167-198. Springer, Singapore, 2018.
  30. Sundriyal, Poonam, and Shantanu Bhattacharya. "Inkjet-Printed Sensors on Flexible Substrates." In Environmental, Chemical and Medical Sensors, pp. 89-113. Springer, Singapore, 2018.
  31. Bhattacharya, Shantanu, Akhilendra Bhushan Gupta, Ankur Gupta, and Ashok Pandey. "Introduction to Water Remediation: Importance and Methods." In Water Remediation, pp. 3-8. Springer, Singapore, 2018.
  32. Bhattacharya, Shantanu, Avinash Kumar Agarwal, Nripen Chanda, Ashok Pandey, Ashis Kumar Sen, Sanjay Kumar, and Poonam Sundriyal. "Introduction to Environmental, Chemical, and Medical Sensors." In Environmental, Chemical and Medical Sensors, pp. 3-6. Springer, Singapore, 2018.
  33. Manoharan, Kapil, Anubhuti Saha, and Shantanu Bhattacharya. "Nanoparticles-Based Diagnostics." In Environmental, Chemical and Medical Sensors, pp. 253-269. Springer, Singapore, 2018.
  34. Bhatt, Geeta, and Shantanu Bhattacharya. "DNA-Based Sensors." In Environmental, Chemical and Medical Sensors, pp. 343-370. Springer, Singapore, 2018.
  35. Kant, Rishi, and Shantanu Bhattacharya. "Sensors for Air Monitoring." In Environmental, Chemical and Medical Sensors, pp. 9-30. Springer, Singapore, 2018.
  36. Kumar, Sanjay, Pulak Bhushan, and Shantanu Bhattacharya. "Coatings on Surgical Tools and How to Promote Adhesion of Bio‐Friendly Coatings on Their Surfaces." Adhesion in Pharmaceutical, Biomedical, and Dental Fields (2017): 207.
  37. Gupta, Ankur, Vinay Kumar Patel, Rishi Kant, and Shantanu Bhattacharya. "Surface Modification Strategies for Fabrication of Nano‐Biodevices." Progress in Adhesion and Adhesives (2017): 161-185.
  38. Kant, Rishi, Geeta Bhatt, Poonam Sundriyal, and Shantanu Bhattacharya. "Relevance of Adhesion in Fabrication of Microarrays in Clinical Diagnostics." Adhesion in Pharmaceutical, Biomedical, and Dental Fields (2017): 257.
  39. Guruprasad, Thimmappa Shetty, Shantanu Bhattacharya, and Sumit Basu. "Investigation of Size Effect Through In-Situ SEM Testing of Polystyrene Micropillars." In Micro and Nanomechanics, Volume 5, pp. 33-39. Springer, Cham, 2017.
  40. Kumar, Sanjay, Pulak Bhushan, and Shantanu Bhattacharya. "The 4 I’s of Innovation." In Innovation, Incubation and Entrepreneurship, Vol. 1, pp. 31-42. Springer, Singapore, 2017 (https://doi.org/10.1007/978-981-10-3334-6_5)
  41. Kumar, Sanjay, Pulak Bhushan, and S. Bhattacharya. "Diagnosis of communicable diseases using paper micro-fluidic platforms." Point-of-care diagnostics—new progresses and perspectives. IAPC Open Book and Monograph Platform (OBP), Zagreb Google Scholar (2016).
  42. Bhatt, Geeta, Sanjay Kumar, Poonam Sundriyal, Pulak Bhushan, Aviru Basu, Jitendra Singh, and Shantanu Bhattacharya. "Microfluidics Overview." In Microfluidics for Biologists, pp. 33-83. Springer, Cham, 2016.
  43. Kant, Rishi, Ankur Gupta, and S. Bhattacharya. "Studies on CO 2 laser micromachining on PMMA to fabricate micro channel for microfluidic applications." In Lasers Based Manufacturing, pp. 221-238. Springer, New Delhi, 2015.
  44. Panda, Siddhartha, Mukesh Sharma, Shantanu Bhattacharya, Ashok Kumar, Arnab Bhattacharya, S. K. Katiyar, and Shivesh Prakash. "Progression of M tuberculosis from Latency to Disease: In vitro and in vivo Tracking of Iron Content in Alveolar Macrophages."
  45. Rajeev Kumar Singh, Anil Ghubade, Rahul Chaudhury and Shantanu Bhattacharya. “Fabrication technology for biomedical systems using non-conventional micromachining” in Introduction to Micromachining.
  46. Kant, Rishi, Ankur Gupta, and S. Bhattacharya. "Studies on CO 2 laser micromachining on PMMA to fabricate micro channel for microfluidic applications." In Lasers Based Manufacturing, pp. 221-238. Springer, New Delhi, 2015.
  47. Panda, Siddhartha, Mukesh Sharma, Shantanu Bhattacharya, Ashok Kumar, Arnab Bhattacharya, S. K. Katiyar, and Shivesh Prakash. "Progression of M tuberculosis from Latency to Disease: In vitro and in vivo Tracking of Iron Content in Alveolar Macrophages."
  48. Rajeev Kumar Singh, Anil Ghubade, Rahul Chaudhury and Shantanu Bhattacharya. “Fabrication technology for biomedical systems using non-conventional micromachining” in Introduction to Micromachining
  1. Name: Jitendra Singh

    Thesis Title: Fabrication of complex microstructures on metallic surfaces using a novel vertical Electrochemical Micromachining (ECMM) process

    Year: 2022

    Co-Supervisor: None

    Current Status: Thesis Submitted

  2. Name: Eshan Sadasivan

    Thesis Title: Social entrepreneurship through product design

    Year: 2022

    Co-Supervisor: Mainak Das

    Current Status: Thesis Submitted

  3. Name: Nilima Regina Topno

    Thesis Title: Development of a smart camouflage shield for military personnel

    Year: 2022

    Co-Supervisor: Shatarupa Thakurta Roy

    Current Status: Thesis Submitted

  4. Name: Kapil Manoharan

    Thesis Title: Surface Nano-engineering through Digital manufacturing and Decision-making tools

    Year: 2021

    Co-Supervisor: None

    Current Status: Post-doctoral Research staff in TCIP incubated company by @IITK

  5. Name: Pankaj Singh Chauhan

    Thesis Title: Fabrication of metal oxide semiconducting nanomaterials and composites for gas sensing and water remediation applications

    Year: 2020

    Co-Supervisor: Niraj Sinha

    Current Status: Postdoctoral Fellow, Department of Instrumentation and Applied Physics, IISc Bengaluru, India

  6. Name: Geeta Bhatt

    Thesis Title: Utilization of electro-kinetic forces to develop electronic PCR/Gene-delivery devices

    Year: 2020

    Co-Supervisor: None

    Current Status: Senior Scientist in TCIP Pvt. Ltd., Incubated @ SIIC IIT Kanpur

  7. Name: Poonam Sundriyal

    Thesis Title: Fabrication of nano-scale materials and surfaces for energy storage and adhesion improvement applications

    Year: 2019

    Co-Supervisor: None

    Current Status: Assistant Professor, Mechanical Engg., IIT Kharagpur

    Website: http://www.iitkgp.ac.in/department/ME/faculty/me-psundriyal#resp-tab4

  8. Name: Mukta Ramchandani

    Thesis Title: Embodied Cognition: Research directions in persuasion, consumer behavior and retailing

    Year: 2019

    Co-Supervisor: None

    Current Status: Visiting Lecturer, Skema Business School, Nice, France

  9. Name: Aviru Kumar Basu

    Thesis Title: Design and development of MEMS based sensors for rapid detection of trace analytes

    Year: 2019

    Co-Supervisor: Ashima Pradhan

    Current Status: Scientist-C /Faculty Member at The Institute of Nano Science and Technology (INST)

  10. Name: Sanjay Kumar

    Thesis Title: Design and development of engineered functional materials for point-of-care diagnostics & noise mitigation applications

    Year: 2019

    Co-Supervisor: None

    Current Status: Post-Doctoral Research Associate, National University of Singapore.

  11. Name: T. Guruprasad

    Thesis Title: Size effect in mechanical properties of materials at micron scale

    Year: 2018

    Co-Supervisor: Sumit Basu

    Current Status: Post-Doctoral Research Associate, Khalifa Uiversity, Abu Dhabi

  12. Name: Ankur Gupta

    Thesis Title: Fabrication, Characterization and Application of Various Nanostructures in Sensing and Remediation

    Year: 2015

    Co-Supervisor: None

    Current Status: Assistant Professor at the Department of Mechanical Engineering, Indian Institute of Technology Jodhpur.

    Website: https://sites.google.com/view/ankurguptaiit/about-me

  13. Name: Vinay Kumar Patel

    Thesis Title: Nanofabrication and Combustion Characterization of Highly Energetic Metal Oxides / Nano-Aluminum Composites for Pyrotechnics and Gene Transfection Applications

    Year: 2015

    Co-Supervisor: None

    Current Status: Professor Department of Mechanical Engineering at G.B. Pant Engineering College, Pauri.

  14. Name: Rishi Kant

    Thesis Title: Miniaturized fluid/ particle manipulation in hybrid micro-devices fabricated with laser micromachining for fluid delivery, mixing and diagnostic applications

    Year: 2016

    Co-Supervisor: None

    Current Status: Assistant Professor, Department of Mechanical Engineering, HBTI, Kanpur, 2022.

  15. Name: Rajeev Kumar Singh

    Thesis Title: Micro-manufacturing of 2/3 dimensional structures in polymers and impact of fluid structure interplay within them

    Year: 2014

    Co-Supervisor: None

    Current Status: Associate Professor, Department of Mechanical Engineering, Amity University

  16. Name: Seema Deepak Yardi

    Thesis Title: A Novel technique for using polymers as optical interconnects and as sensors for biological recognition

    Year: External PhD candidate, 2016

    Co-Supervisor: Dr. Dharmender Boolchandani (MNIT, Jaipur)

    Current Status: Government Polytechnique, Aurangabad

  17. Name: Shailendra Singh

    Thesis Title: A new cognitive design intervention in Knowledge Management through Innovative skill development approach

    Year: External PhD, 2021

    Co-Supervisor: Dr. S. Venkatramaniah

    Current Status: Divisional Manager Spares & Acessories, Maruti Suzuki India Ltd.

  1. Name: Rajeev

    Thesis Title: Smart IoT system for Greenhouse to monitor Micro-climatic soil properties for medicinal plants

    Programme: M.Tech 2008

    Completion Year: 2021

    Co-Supervisor(s): None

  2. Name: Kuldeep

    Thesis Title: rGO-V2O5 Nanowire Composites for the Decolorization Rhodamine B Dye

    Programme: M.Tech 2008

    Completion Year: 2021

    Co-Supervisor(s): None

  3. Name: Anutosh Nimesh

    Thesis Title: Development of ECM process on vertical surfaces

    Programme: M.Tech 2008

    Completion Year: 2020

    Co-Supervisor(s): None

  4. Name: Shashank Chaudhary

    Thesis Title: Design and development of a system for stacking surgical blades

    Programme: M.Des. 2008

    Completion Year: 2020

    Co-Supervisor(s): None

  5. Name: Gajendra Raikwar

    Thesis Title: Intervention of Industrial Design in agricultural farm equipment’s; a new design for farming practices in small landholdings

    Programme: M.Des. 2008

    Completion Year: 2018

    Co-Supervisor(s): None

  6. Name: Kuldeep Yadav

    Thesis Title: Fabrication of micro-fluidic platform for Dielectrophoresis (DEP) assisted capture of pathogenic bacteria on a printed circuit board

    Programme: M.Tech 2008

    Completion Year: 2017

    Co-Supervisor(s): None

  7. Name: Ashutosh Rai

    Thesis Title:Enhancement in photocatalytic activity of Zinc-oxide nanorods through coating of metals

    Programme: M.Tech 2008

    Completion Year: 2017

    Co-Supervisor(s): None

  8. Name: Ankit Belchandan

    Thesis Title:Design intervention for developing a low-cost dental loupe to increase the effect of visualization of oral cavity in Indian Dental Practices

    Programme: M.Des. 2008

    Completion Year: 2016

    Co-Supervisor(s): Satyaki Roy

  9. Name: Haripada Soren

    Thesis Title:Development of Water Purifier by using Red Mud

    Programme: M.Des. 2008

    Completion Year: 2016

    Co-Supervisor(s): None

  10. Name: Pradeep Verma

    Thesis Title:Application of smart parking in development of smart cities in India

    Programme: M.Des. 2008

    Completion Year: 2016

    Co-Supervisor(s): None

  11. Name: Sachin N.P.

    Thesis Title: Designing and prototyping of efficient writing tools for the visually impaired

    Programme: M.Des. 2008

    Completion Year: 2016

    Co-Supervisor(s): None

  12. Name: Aditya Singh Bhisht

    Thesis Title: Design and fabrication of a rapid Styrofoam prototyping machine

    Programme: M.Des. 2008

    Completion Year: 2016

    Co-Supervisor(s): None

  13. Name: Shweta Gautam

    Thesis Title: Designing of a Photocatalytic filter for Remediation of industrial wastewater

    Programme: M.Des. 2008

    Completion Year: 2016

    Co-Supervisor(s): None

  14. Name: Mohit Tewari

    Thesis Title: Making Dental Facility Accessible to Mass Population In India: Designing a Low cost dental chair for India

    Programme: M.Des. 2008

    Completion Year: 2016

    Co-Supervisor(s): Deepu Philip

  15. Name: Charu

    Thesis Title: Design for Disability - Indoor Navigation for visually challenged

    Programme: M.Des. 2008

    Completion Year: 2016

    Co-Supervisor(s): Jhumkee Sengupta Iyer

  16. Name: Eshan Sadasivan

    Thesis Title: Design and development of newspaper carry bag making machine

    Programme: M.Des. 2008

    Completion Year: 2016

    Co-Supervisor(s): Mainak Das

  17. Name:Himanshu Singh

    Thesis Title: Size reduction of nano-particles through micromixing with etchants in a micro-channel

    Programme: M.Tech 2008

    Completion Year: 2015

    Co-Supervisor(s): Niraj Sinha

  18. Name:Jayant Raj Saurav

    Thesis Title: Solar light-based degradation of organic pollutants by ZnO nanostructures for water filtration system

    Programme: M.Tech 2008

    Completion Year: 2015

    Co-Supervisor(s): Niraj Sinha

  19. Name:Anurag Govind Meher

    Thesis Title: Velocity measurement technique of shock waves generated through combustion of nano-energetic composites through schlieren imaging

    Programme: M.Tech 2008

    Completion Year: 2015

    Co-Supervisor(s): None

  20. Name:Sushant Singh

    Thesis Title: A novel solenoidal valve for embedded microfluidics application

    Programme: M.Tech 2008

    Completion Year: 2014

    Co-Supervisor(s): None

  21. Name:Abhinav Srivastava

    Thesis Title: Development of Nano-Porous Palladium film for enhanced hydrogen sensing

    Programme: M.Tech 2008

    Completion Year: 2013

    Co-Supervisor(s): None

  22. Name:Deepak Arya

    Thesis Title: Design and fabrication of an electronic thermo-cycler with microfluidic cooling capabilities for performing quantitative Polymerase Chain Reaction

    Programme: M.Tech 2008

    Completion Year: 2013

    Co-Supervisor(s): Prabhat Munshi

  23. Name:Kislay Kaushal

    Thesis Title: Nano Patterning Approaches, Zinc Oxide Nano Structures Synthesis and their Application to ds DNA Surface Electrophoresis

    Programme: M.Tech 2008

    Completion Year: 2013

    Co-Supervisor(s): None

  24. Name:Akshay Pravin Atwe

    Thesis Title: Design and Fabrication of a Microvalve Based on pH Sensitive Hydrogel

    Programme: M.Tech 2008

    Completion Year: 2012

    Co-Supervisor(s): Ishan Sharma

  25. Name:Manoj Kumar Gupta

    Thesis Title: Microfabrication of Metallic Cantilever Structures and Investigation of their Mechanical behavior at Microscopic Length Scale

    Programme: M.Tech 2008

    Completion Year: 2012

    Co-Supervisor(s): Sumit Basu

  26. Name:Avinash Kumar

    Thesis Title: Optimization of Machining Processes for preparation of a Photomasks

    Programme: M.Tech 2008

    Completion Year: 2012

    Co-Supervisor(s): None

  27. Name:Suresh E.

    Thesis Title: Design Optimization of a Novel Solenoid Micro Valve

    Programme: M.Tech 2008

    Completion Year: 2011

    Co-Supervisor(s): None

  28. Name:Arnab Ghosh

    Thesis Title: Surface Electrophoresis of dsDNA across Orthogonal Surfaces

    Programme: M.Tech 2008

    Completion Year: 2010

    Co-Supervisor(s): None

  29. Name:Rahul Choudhary

    Thesis Title: Bilayer Staggered Herringbone Micro-mixers

    Programme: M.Tech 2008

    Completion Year: 2009

    Co-Supervisor(s): None

  30. Name:Suresh Jha

    Thesis Title: Design, fabrication, and testing of a novel peristaltic micro-pumping system

    Programme: M.Tech 2008

    Completion Year: 2009

    Co-Supervisor(s): None

  31. Name:Anil Ghubade

    Thesis Title: Dielectrophoresis assisted concentration of micro-particles and their rapid quantitation based on optical means

    Programme: M.Tech 2008

    Completion Year: 2009

    Co-Supervisor(s): None

  1. Gajendra Nagar, (AE), Year of mentoring-2017-18
  2. Madhukant, (CSE), Year of mentoring-2017-18
  3. Saurabh Ranjan, (ME), Year of mentoring-2017-18
  4. Tushar Gupta (CSE), Year of mentoring-2017-18
  5. Akash Jain, (AE), Year of mentoring-2017-18
  6. Harshvardhan, (EE), Year of mentoring-2017-18
  7. Manish Kumar, (AE), Year of mentoring-2017-18
  8. Rithwik Patibandla, (EE), Year of mentoring-2017-18
  9. Mayank Mittal,(EE), Year of mentoring-2016-17
  10. Vikulp Bansal,(EE), Year of mentoring-2016-17
  11. Ritwik Bera (ME), Year of mentoring-2016-17
  12. Tushar Agarwal (ME), Year of mentoring-2016-17
  13. Divyanshu Narayan (ME), Year of mentoring-2015-16
  14. Dipendra (ME), Year of mentoring-2015-16
  15. Elle Atma Vidya Prakash (EE), Year of Mentoring 2013-15
  16. Preksha Gupta (AE), Year of mentoring 2013-15.
  17. Sanny Kumar (ME), Year of mentoring 2013-14.
  18. Rahul Gurjar (CS), Year of mentoring 2013-14.
  19. Shehzad Hathi (EE), Year of mentoring 2013-14.
  20. Shivam Aggarwal (ME), Year of mentoring 2013-14.
  21. Nitish Kumar (EE), Year of mentoring 2013-14.
  22. Sidhant Khatri (EE), Year of mentoring 2013-14.
  23. Dhrupal Shah (ME), Year of mentoring 2012-14.
  24. Deepali Mittal (AE), Year of mentoring 2012-14.
  25. Harshad Sawhney (CSE), Year of mentoring 2012-14.
  26. Vineet Garg(ME), Year of mentoring 2012-14.
  27. Abhijeet Verma(EE),Year of mentoring 2011-12.
  28. Ajinkya Kumar Jain (ME), Year of mentoring 2011-12.
  29. Anuj(ME), Year of mentoring 2011-12.
  30. Ajaypal Singh(ME), Year of mentoring 2010-12.
  31. Anubhav (ME), Year of mentoring 2011-12.
  32. Farid Ahsan, Year of mentoring 2011-12.
  33. Mudit, Year of mentoring 2011-12.
  34. Omanshu Thapliyal, Year of mentoring 2011-12.
  35. Sachin Aggarwal, Year of mentoring 2011-12.
  36. G. Sriram, Year of mentoring 2011-12.
  37. Varun Bhatt, Year of mentoring 2011-12.
  38. Ayush Varshney, Year of mentoring 2011-12.
  39. Govind Saria, Year of mentoring 2011-12.
  40. Naman Kumar, Year of mentoring 2011-12.
  41. Rajat Arora, Year of mentoring 2011-12.
  42. Siddharth, Year of mentoring 2011-12.
  43. Subhojit Ghosh, Year of mentoring 2011-12.
  44. Vipul Chaudhury, Year of mentoring 2011-12.
  45. Mayank Baranwal, Year of mentoring 2009-11.
  46. Faez Ahmed,Year of mentoring 2009-11.
  47. Abhilash Jindal, Year of mentoring 2009-11.
  48. Ankur Jain, Year of mentoring 2009-11.
  49. Pranay Sharma, Year of mentoring 2010-11.
  50. Sagar Setu, Year of mentoring 2010-11.
  51. Ankur Agarwal, Year of mentoring 2010-11.
  52. Ashish Bajpai, Year of mentoring 2010-11.
  53. Mohit, Year of mentoring 2010-11.
  54. Kamal Sahni, Year of mentoring 2010-11.
  55. Tarun Baranwal, Year of mentoring 2010-11.
  56. Anki Gupta, Year of mentoring 2010-11.
  57. Kartikey Asthana, Year of mentoring 2010-11.
  58. Akshay Mittal, Year of mentoring 2010-11.
  59. Subhranshu Baranwal, Year of mentoring 2010-11.
  60. Gaurav Dhama, Year of mentoring 2009-10.
  61. Shishir Pandya, Year of mentoring 2009-10.
  62. Palash Soni, Year of mentoring 2009-10.
  1. Dr. Gurmukh D. Mehta and Veena M. Mehta Chair Position offered between 2018-2021 and again re-offered for 2022~2025.
  2. Abdul Kalam Technology Innovation National Fellow, Conferred by Indian National Academy of Engineering (INAE), 2020.
  3. Fellow of The Royal Society of Chemistry, 2021.
  4. Dr. R.S. Khandpur Award, Conferred by Institution of Electronics and Telecommunication Engineers (IETE), 2020.
  5. Fellow of Institution of Electronics and Telecommunication Engineers (IETE), 2020.
  6. Senior Member, IEEE, 2019.
  7. NASI Reliance Platinum Jubilee Award, Conferred by National Academy of Sciences of India, 2019.
  8. Er. M.P. Baya National Award, Conferred by Institution of Engineers of India, 2019.
  9. Fellow of the International Society of energy, environment and sustainability (ISEES), 2018.
  10. Fellow of the Institution of Engineers of India (FIEI), 2016.
  11. NDRF (National Design Research Forum), IEI, Best Mechanical engineering design award-2014.
  12. ISSS (Institute of Smart Structures and Systems) Young Scientist Award- 2013.
  13. Honorary Fellow of the Institute of High Energetic Materials in Melbourne, 2011.
  14. IEI (Institute of Engineers of India), Young Engineers Award, 2010 in Mechanical Engineering.
  15. Selected in Chancellor’s list 2005-2006 and 2003-2004.
  16. Huggins Graduate Fellowship awarded from 2004~2006, at the University of Missouri at Columbia.
  17. Awarded 3rd place in the college wide research creative activities competition in 2006 at the University of Missouri at Columbia.
  18. Awarded 2nd place in the research poster contest held as a part of the Life- sciences week 2004 at MU. Won a mini research grant of $500
  1. Nominated for the best graduate student award~2005.
  2. Nominated for the best student entrepreneur award~2006.
  1. Associate Editor of ―Journal of Micromanufacturing‖, 2019 onwards.
  2. Associate Editor of ―The nanotechnology and nanoscience‖, 2011 onwards.
  3. Boeing Outstanding Leadership certificate, 2009-2010, Boeing Corp. USA.
  4. Best Teachers awards (07 times) from the Senate of the Indian Institute of Technology Kanpur for Courses (1) Advanced manufacturing Techniques and (2) Introduction to Bio-MEMs and Microsystems.
  5. Represented the Design Program in Stanford University for the Global Kickoff Event of ME310 course (2014).
  6. Nominated as a member of a review panel by the Indo-German Science and Technology Council for reviewing proposals related to water sensing and remediation (2015)
  1. Award Name: Position in Chancellor's List 2004

    Organization: Office of Registrar, Texas Tech University

    Purpose: Graduate students with more than 3.8 CGPA

  2. Award Name: Huggins G. Elseworth Fellowship 2004-2006

    Organization: University of Missouri- Columbia, Graduate School

    Purpose: Best Graduate Student of Biological Engineering

  3. Award Name: Lifesciences Award 2005

    Organization: Senator Bond Life Sciences Centre, University of Missouri, Columbia

    Purpose: 3rd Position in PhD Research Project Competition

  4. Award Name: Boeing Outstanding Leadership Award-2009

    Organization: Boeing Corporation

    Purpose: For Leading Undergraduate Research Program of Boeing called Abhyast, an Autonomous ground navigation system design and development at IIT Kanpur

  5. Award Name: Boeing Award 2019

    Organization: Boeing Corporation

    Purpose: Innovation in the field of acoustic metamaterials

  6. Award Name: Boeing Award 2019

    Organization: Boeing Corporation

    Purpose: Innovation in the field of Nano- energetic Composites

  7. Award Name: Senior member, IEEE

    Organization: IEEE

    Purpose: In recognition of Professional Standing

  8. Award Name: Fellow of the Royal Society of Chemistry (FRSC)

    Organization: Royal Society of Chemistry, UK

    Purpose: Recognition for accomplishments and Contributions to Chemical Sciences

  1. Award Name: Abdul Kalam Technology Innovation National Fellow-2020

    Organization: Indian National Academy of Engineering (INAE) 

    Purpose: Contribution in the fields of Micro-Fabrication, Nano-Materials Synthesis and Applications, Micro-fluidic Systems as well as overall contribution in the growth of the engineering profession within the country.

  2. Award Name: R. S. Khandpur Award-2020

    Organization: Institute of Electronics and Telecommunication (IETE) 

    Purpose: For lifetime achievements and outstanding contribution at national / international level in the field of ‘Medical Instrumentation’ covering education, research, design, development, and production.

  3. Award Name: NASI Reliance Platinum Jubilee Award -2019

    Organization: National Academy of Science 

    Purpose: Application driven innovations in Physical Sciences.

  4. Award Name: Er. M.P. Baya National Award-2019

    Organization: Institution of Engineers of India 

    Purpose: Excellence in Engineering

  5. Award Name: Fellow of International Society of Energy, Environment and Sustainability-2018

    Organization: Institute of Energy, Environment and Sustainability 

    Purpose: Exceptional Scientific and Professional contributions to the areas of functional materials, microfluidics, Sensors and BioMEMS

  6. Award Name: National Design Award in Mechanical Engineering- 2014

    Organization: Institution of Engineers (India) National Design and research forum 

    Purpose: Outstanding Contribution to the field of Engineering Design

  7. Award Name: ISSS Young Scientist Award -2013

    Organization: Institute of Smart Structures and Systems

    Purpose: Exceptional work in BioMEMSand Microfluidics

  8. Award Name: IEI Young Engineers Award- 2009

    Organization: Institution of Engineers (India)

    Purpose: Outstanding Contribution in the field of Mechanical Engineering

Academic and non-academic administration, mentoring, setting up laboratories

  1. Date: 2017-2020

    Position: Head, Design Program 

    Organization: Design program, Indian Institute of Technology Kanpur

  2. Date: 2013-2015

    Position: Institute appointed Faculty Coordinator

    Organization: TA202 core undergraduate manufacturing laboratory, Indian Institute of Technology, Kanpur.

  3. Date: 2013-2016

    Position: Institute appointed Faculty Coordinator

    Organization: 4-i Industrial Laboratory, Indian Institute of Technology, Kanpur.

  4. Date: 2013-2016

    Position: Department appointed Convenor

    Organization: Manufacturing Science and Technology Stream, Indian Institute of Technology, Kanpur.

  5. Date: 2013-2014

    Position: Institute senate appointed committee member

    Organization: P.K. Kelkar Library, Indian Institute of technology, Kanpur.

  6. Date: 2013-2015

    Position: Institute appointed committee member

    Organization: Institute space planning and allocation committee, Indian Institute of Technology, Kanpur.

  7. Date: 2009-onwards

    Position: Member

    Organization: DST institute on nano-sciences

  8. Date: 2008-onwards

    Position: Founder and coordinator of Microsystems Fabrication Laboratory

    Organization: Department of Mechanical Engineering, IIT Kanpur

  1. PAC member, Water Technology Initiative, DST, India
  2. Scientific council member of Indo-German Science and technology council, DST.
  3. BIRAC, Technical reviewer for Biomedical Projects, DBT, BIRAC.
  4. Membership in Professional Organization:
    a. Member of Editorial Board of the Journal of Green Nanotechnology.
    b. Member of American Society of Mechanical Engineers.
    c. Member of Biomedical Engineering Society.
    d. Member of American Society of Engineering Education.
    e. Member of International Society on Energy, Environment and Sustainability.

  5. Boeing Focal for North Zone II, National Aeromodelling and Flying Competition
  6. Reviewer ship of Journal:
    a. Reviewer of Biomedical Microdevices.
    b. Reviewer of International journal of Manufacturing technology and management.
    c. Reviewer of Current Science.
    d. Reviewer of Cancer.
    e. Reviewer of Journal of Bio-nanotechnology.
    f. Reviewer of Micro-fluidics and Nano-fluidics.

  7. Have served as examiner in Ph.D. thesis from IISc, DIAT, IIT Madras, VIT, IITDM Jabalpur, IIT Mumbai, BITS Pilani, IIT Delhi, CMERI Durgapur
  1. Details of Patent: "Method for enhanced bonding of thermoplastic composites" Megha Sahu, Om Prakash, Shantanu Bhattacharya, Poonam Sundriyal

    Patent File No. (Year): US 2021/0269608 A1, Pub. 02/09/2021

    Status: Technology transferred to Boeing

    International/National: US Patent in collaboration with Boeing

  2. Details of Patent: "Method for enhanced bonding of thermoplastic composites" Megha Sahu, Om Prakash, Shantanu Bhattacharya, Poonam Sundriyal

    Patent File No. (Year): US 2022/11214350 B2, Pub. 04/01/2022

    Status: Technology transferred to Boeing

    International/National: US Patent in collaboration with Boeing

  3. Details of Patent: "Composite sound absorption panel assembly", Om Prakash, Shantanu Bhattacharya, Sanjay Kumar, Pulak Bhushan

    Patent File No. (Year): US 2019/0103089A1(2019)

    Status: Technology transferred to Boeing

    International/National: US Patent in collaboration with Boeing

  4. Details of Patent: "Carry Bag Making Machine", Eshan Sadasivan, Mainak Das, Shantanu Bhattacharya.

    Patent File No. (Year): 03/2018(2018)

    Status: Technology transferred to Prosoc Innovators

    International/National: National

  5. Details of Patent: "An Efficient Writing", Sachin NP, Vimal C., Satyaki Roy, Shantanu Bhattacharya

    Patent File No. (Year): 201711026411(2017)

    Status: Technology Won GYTI award 2017

    International/National: National

  6. Details of Patent: An Integrated Microchip for the Detection of a Biological Cell", Shantanu Bhattacharya, Gurunath Ramanathan, Monalisa Nayak, Deepak Singh, Rishi Kant

    Patent File No. (Year): 28/2016(2016)

    Status: Technology commercialized by TCIP, Incubated @IIT Kanpur for PCR based diagnostic system development

    International/National: National

  7. Details of Patent: "Micropump for Fluidic Applications", Rishi Kant, Shantanu Bhattacharya, Abhijit Verma, Naman Kumar Rawal

    Patent File No. (Year): 201611005750(2016)

    Status: None

    International/National: National

  8. Details of Patent: "A process for the production of high surface area nano metal oxides", Shantanu Bhattacharya, Ankur Gupta, Shashank Shekhar Pandey

    Patent File No. (Year): 34/2015(2015)

    Status: Technology being commercialized for textile effluent remediation

    International/National: National

  9. Details of Patent: "School Bag Convertible to Study Table", Eshan Sadasivan, Shantanu Bhattacharya, Mainak Das

    Patent File No. (Year): 287945(2015)

    Status: Technology transferred to Prosoc Innovators

    International/National: National

  10. Details of Patent: "Design for disability: A waist wearable for visually challenged for Indoor Navigation", Shantanu Bhattacharya, Jhumkee Iyenger, Charu

    Patent File No. (Year): 277650(2014)

    Status: None

    International/National: National

  11. Details of Patent: "Agarose Nanoplatinum Composites", Shantanu Bhattacharya, Shubhra Gangopadhyay, Keshab Gangopadhyay, Keshab Gangopadhyay, Nripen Chanda, Paul Sharp

    Patent File No. (Year): 8747637B2(2014)

    Status: None

    International/National: US Patent

  12. Details of Patent: "Reusable PCR amplification system and method", Shantanu Bhattacharya, Venumadhav Korampally, Shubhra Gangopadhyay, Keshab Gangopadhyay, Keshab Gangopadhyay, Sheila A. Grant, Steven B. Kleiboeker, Yuanfang Gao

    Patent File No. (Year): 8173077(2012)

    Status: Technology Negotiated with M/S Fluidigm by University of Missouri Columbia

    International/National: US Patent

  13. Details of Patent: "Shock wave and power generation using onchip nanoenergetic materials", Shubhra Gangopadhyay, Steven Apperson, Keshab Gangopadhyay, Andrey Bezmelnitsyn, Rajagopalan Thiruvengadathan, Michael Kraus, Rajesh Shende, Maruf Hossain, Senthil Subramanian, Shantanu Bhattacharya, Yuangang Gao

    Patent File No. (Year): 8066831(2011)

    Status: Technology being commercialized by Nanos LLC., Columbia, Missouri

    International/National: US Patent

  14. Details of Patent: "A method for creation of 2 and 3-dimensional micro channels of varied dimensions using replication and molding around a wire", Bikramjeet Basu, Shantanu Bhattacharya, Rajeev Kumar Singh

    Patent File No. (Year): 295640(2008)

    Status: None

    International/National: National

  1. Details of Patent: "Industrial Wastewater remediation technique by integrated pretreatment and photocatalysis" Pankaj Singh Chauhan, Aditya Choudhury, S.K. Singh, Urmila Bhrigu, Shantanu Bhattacharya

    Patent File No.: Patent application no. to be granted (2021)

    Status (filed): Filed

    International/National: Indian Patent

  2. Details of Patent: "Lateral Flow Immunoassay based Point of Care Diagnostic Device for Ultrasensitive colorimetric detection of Dengue", Geeta Bhatt, Md. Rashiku, Poonam Sundriyal, and Shantanu Bhattacharya

    Patent File No.: 202111024379 (2021)

    Status (filed): Filed, Technology Commercialized by company incubated at IIT Kanpur through the BIRAC, BIG program

    International/National: National

  3. Details of Patent: "A device for detecting one or more fragments of DNA", Geeta Bhatt, and Shantanu Bhattacharya

    Patent File No.: 202011056963(2020)

    Status (filed): Filed

    International/National: National

  4. Details of Patent: "Acoustic metamaterials with discreet band absorption through planar fractal geometries" Sanjeet  Kumar,Om Prakash, Megha Sahu, Shantanu Bhattacharya

    Patent File No.: Application No. to be granted (2022)

    Status (filed): Filed

    International/National: US Patent in collaboration with Boeing

  5. Details of Patent: "Commode on wheels", Shantanu Bhattacharya, Akshay Purwar, Sandip Kumar, Kuldeepak Mahto, Nishant Kumar, Swagatam Mitra, Shishir Kumar, Virendra Singh

    Patent File No.: 301001

    Status (filed): Filed 04/01/2018

    International/National: National

Projects

  1. Initiation Grant Proposal, Indian Institute of Technology, Kanpur, "Multiplex assaying of water borne pathogens using a Micro-chip platform", Funded (Sep. 2007- Sep. 2008). (Amount: 10,00,000 INR, Equivalent USD $20,000). PI
  2. Department of Biotechnology, Government of India "Integrated Dielectrophoresis based concentration and real time PCR based identification of food pathogens in a single microchip", Funded (August 2008) (Amount: 41,50,000 INR, Equivalent USD $83,000). PI
  3. Proposal Reach Symposium-2008, Indian Institute of Technology-Kanpur, Development and validation of a microchip platform-based technique to count bacteria‖, Funded (May-2008). (Amount: 5,00,000 INR, Equivalent USD $10,000). PI
  4. CARE 2008 competitively funded proposal, Office of Dean of Research and Development. Indian Institute of Technology-Kanpur, ―Developing a micro- fabrication facility‖, Funded (October-2008) (Amount: 41,00,000 INR, Eq. USD $82,000). PI
  5. EXTENDED CARE 2008 competitively funded proposal, Office of Dean of Research and Development. Indian Institute of Technology-Kanpur, ―Developing a micro-fabrication facility‖, Funded (October-2008). (Amount: 1,50,00,000 INR, Eq. USD $300,000). PI
  6. Boeing Corporation, competitively funded proposal through the university relations program of Boeing ―Design and development of a completely autonomous ground and aerial navigation system‖, Funded (January-2008~ December-2014). (Amount: 1,18,64,946 INR, Eq. USD $237,299). PI
  7. National Program on Micro and Smart Structures (NPMASS), Government of India ―A novel MEMS based gas-sensor platform for automotive applications‖, Funded (March 2010). (Amount: 44,00,000 INR, Eq. USD $88,000). PI
  8. National Program on Micro and Smart Structures (NPMASS), Government of India, ―Miniaturized polymeric fluidic pumps based on principle of peristalsis‖, Funded (March 2011). (Amount: 52,50,000 INR, Eq. USD $105,000). PI
  9. National Program on Micro and Smart Structures (NPMASS), Government of India, ―MEMS design center at IIT Kanpur‖, Funded (March 2009). (Amount: 3198500 INR, Eq. USD $48462). PI
  10. Department of Science and technology, Government of India, ―DST unit of Nano-sciences‖, Funded (January 2012). (Joint proposal of several faculty members). Co-PI
  11. Department of Science and Technology, SERB, Government of India ―A novel high efficiency micro-scale gene transfection system using nanoenergetic materials‖, Funded (August 2012) (Amount 31,00,000INR, Eq. USD $62,000). PI
  12. Department of Biotechnology, Food and Nutrition Security, Government of India. ―Development of Biosensors Using Nano-scale Materials‖, Funded (August 2012) (Amount:45,00,000 INR, Eq. USD $ 90,000). PI
  13. Sardar patel post graduate institute of dental and medical sciences (SPPGSDMS), Design and fabrication of a dental chair for rural India. Funded (February 2015) (Amount: 5,50,000, INR, Eq. USD $9000). PI
  14. Boeing Corporation, USA, ―Additive Manufacturing of Functionally Engineered Materials‖. Funded (April 2016) (Amount: 59,50,000 INR, Eq. USD 87,500). PI
  15. Department of Science and Technology, Water Treatment Initiative, ―Installation of a pilot plant of 10 KLD capacity comprising ZnO-Graphene based sensitive photo catalytic filter for visible light catalysis and carbon nano-mat fiber filter for the treatment of the effluent of CETP, Jodhpur as a replacement of their secondary treatment unit and development of an alternative low-cost process for dye adsorption on acid modified soil”, Funded (Amount: 120,00,000 INR, USD $ 176470), PI
  16. Indian Space research organization, ―Development of a Gas Sensor to detect leakage of Helium gas from Inflatable Space Structures‖, Funded (Amount: 1976000 INR, USD $29059). PI
  17. Department of Science and Technology, Instrumentation development committee, "A novel labeled electronic gene identification system using impedance spectroscopy for molecular diagnostics of water and food borne pathogens", Funded (Amount: 42,00,000 INR, USD $65625). PI
  18. Department of Science and Technology, Technology Systems Development Platform, ― Inkjet printed electrodes of Graphene oxide- Metal oxide hierarchical nanostructured nanocomposites for improved energy density and power density thin flexible supercapacitors” Funded (Amount: 40,00,000 INR, USD $65625). PI
  19. BIRAC, Department of Biotechnology, ―Lateral Flow Immunoassay based Point-of- Care Diagnostic Device for Ultrasensitive Colorimetric Detection of Dengue ― Funded to TCIP a technology company incubated by PI (Amount: 50,00,000 INR, USD 70,000)
  20. Indian National Academy of Engineering, ―Abdul Kalam Technology Innovation National Fellowship: Disruptive nanotechnology driven innovation for Treatment of Textile Wastewater: Proposal to Scale up existing pilot plant of 10KLD (kiloliter/day) to real needs of Textile Industry‖, (Amount of Fellowship: 19,00,000 INR every Year for 3-year period extendable by two years)
  21. Development of a low cost ultrasensitive rapid card test for simultaneous detection of Hepatitis A and E infection, Funded ICMR, multicentric project with ILBS, Vasant Kunj, New Delhi, PI (Amount: INR 81,96,000/-, USD 102648)
  22. Fabrication of an electronic test card capable of screening RNA impedimetrically, Funded ICMR, multicentric project with ILBS, Vasant Kunj, New Delhi, PI (Amount: INR 86,73,600/-, USD 108630)
  23. Estimating the quality of milk in unorganized milk distribution centers, Funded by VESKI, Victoria State, Australia, Multi-institutional project between IIT Kanpur, LaTrobe University & BITS Pilani/ Hyderabad, IIT Kanpur PI (Amount: INR 20,27,706, AUSD, 36,641)

Industry level Projects

  1. Title: Additive Manufacturing of Functionally Engineered Materials

    Funding Agency: Boeing Corporation, USA 

    Budget INR (Rs in Lakhs): 102

  2. Title: Design and development of a completely autonomous ground and aerial navigation system

    Funding Agency: Boeing Corporation, USA 

    Budget INR (Rs in Lakhs): 118.64946

  3. Title: A novel MEMS based gas-sensor platform for automotive applications

    Funding Agency: National Program on Micro and Smart Structures (NPMASS), Aeronautical Development Agency (ADA)

    Budget INR (Rs in Lakhs): 44

  4. Title: Miniaturized polymeric fluidic pumps based on principle of peristalsis

    Funding Agency: NPMASS, ADA

    Budget INR (Rs in Lakhs): 52.5

  5. Title: MEMS design center at IIT Kanpur

    Funding Agency: NPMASS, ADA

    Budget INR (Rs in Lakhs): 31.9

  6. Title: Design and fabrication of a dental chair for rural India

    Funding Agency: Sardar Patel post graduate institute of dental and medical sciences

    Budget INR (Rs in Lakhs): 5.5

  7. Title: Design System for Stacking of Surgical Blades

    Funding Agency: Kehr Surgical Pvt Ltd, Kanpur

    Budget INR (Rs in Lakhs): 6.9

  8. Title: Failure of spot-welding joints in wagon

    Funding Agency: Maruti Suzuki India Ltd.

    Budget INR (Rs in Lakhs): 0.45

Indian Space research organization (ISRO) project

  1. Title: Development of a Gas Sensor to detect leakage of Helium gas from Inflatable Space Structures

    Funding Agency: ISRO

    Budget INR (Rs in Lakhs): 19.76

MHRD

  1. Title: Design innovation center

    Funding Agency: MHRD

    Budget INR (Rs in Lakhs): 402

  2. Title: Development of Swayamprbha portal and NPTEL Online system

    Funding Agency: MHRD

    Budget INR (Rs in Lakhs): 175

DST

  1. Title: DST unit of Nano-sciences

    Funding Agency: DST

    Budget INR (Rs in Lakhs): 300

  2. Title: A novel high efficiency micro-scale gene transfection system using nanoenergetic materials

    Funding Agency: DST

    Budget INR (Rs in Lakhs): 31

  3. Title: Installation of a pilot plant of 10 KLD capacity comprising ZnO-Graphene based sensitive photo catalytic filter for visible light catalysis and carbon nano-mat fiber filter for the treatment of the effluent of CETP, Jodhpur as a replacement of their secondary treatment unit and development of an alternative low cost process for dye adsorption on acid modified soil

    Funding Agency: DST

    Budget INR (Rs in Lakhs): 120

  4. Title: Instrumentation development committee,"A novel labeled electronic gene identification system using impedance spectroscopy for molecular diagnostics of water and food borne pathogens

    Funding Agency: DST

    Budget INR (Rs in Lakhs): 42

  5. Title: Inkjet printed electrodes of Graphene oxide- Metal oxide hierarchical nanostructured nanocomposites for improved energy density and power density thin flexible supercapacitors

    Funding Agency: DST

    Budget INR (Rs in Lakhs): 40

DBT

  1. Title: Integrated Dielectrophoresis based concentration and real time PCR based identification of food pathogens in a single microchip

    Funding Agency: DBT

    Budget INR (Rs in Lakhs): 41.5

  2. Title: Indo-Australia Project under SMRP project: Estimating the quality of milk” in unorganized milk distribution center in collaboration with Government of Australia under the IITK-LaTrobe Research Academy

    Funding Agency: IITK-LaTrobe Research Academy

    Budget INR (Rs in Lakhs): 21

ICMR

  1. Title: Development of a low-cost ultrasensitive rapid card test for the simultaneous diagnosis of Hepatitis A and E infection. (ICMR No. 2021-15886) with ILBS PI: Dr. Ekta Gupta as partner

    Funding Agency: ICMR

    Budget INR (Rs in Lakhs): 82

  2. Title: Fabrication of an electronic test card capable of screening RNA impedimetrically. (ICMR No. 2021-15676) with ILBS PI: Dr. Ekta Gupta as partner

    Funding Agency: ICMR

    Budget INR (Rs in Lakhs): 87

  1. Augmentation of water supply of sas nagar (phase v and vi) from kajauli head works to water works sas nagar, 20/11/2013- 19/12/2013, Amount, INR 224720/-, PI: Pranab Mohapatra, Co_PI: Shantanu Bhattacharya, Project No.: GMADA /CE /20130264
  2. Failure of spot welding joints in wagon-r, 3/1/2012-2/22012, Amount, INR 45000/- PI: Shantanu Bhattacharya,Project No.: MARUTI/ME /20110231 .
  3. Study of engine fire in food icon 1.6 sxicar lying at m/s k n motors for consumer court, 08/07/2013-14/07/2013, Amount, INR 33465/- PI: Shantanu Bhattacharya Project no.: CF /ME /20130113
  1. Published many high-quality research papers in distinguished international society journals.
    a. Golden Jubilee International Conference on Environmental Health and Technology, March 2010. Co-Founder.
    b. Organized a 10 day training workshop at CEERI Pilani for fabrication of MEMS polysilicon Peizo-resistive pressure sensors, July-2010. Founder
    c. National Workshop on MEMS technologies and its applications, IIT Kanpur, Sept.-2009, Founder.
    d. Golden Jubilee International Symposium on Fabrication at Small Scales (FASS) and (e)Indo-US conf. on Fabrionics: Science of adv. fabrication, Dec.-2009. Co-Founder
    e. International workshop on futuristic shaping technologies at the Meso, Micro and Nano- scales"October-2007. Co-Founder
    f. QIP programs on CNC (Computer Numeric Control) technology, 5-9th, October 2013, 15- 19th, March 2014, 20-22nd, July, 2014 etc.
    g. Organized the Boeing Engineering Innovations Award workshop (BEIA) for the National Aero-modeling Contest sponsored by Boeing, 2013 ~ 2021. Founder
  2. Organized the “Advanced Micro/ Nano Technology-2016” TEQUIP workshop at IITKanpur. Founder.
  3. Invited speaker in more than 63 national and international forums (14 international) in areas related to Biomedical Micro-devices, Manufacturing of MEMS sensors, Micro-fluidic MEMS, Nano-structured Gas sensors, Nanotechnology for Clinical Diagnostics, Nano-energetic materials, Water remediation through photo-catalysis CNC machining, Reverse engineering, Quality, Lean Manufacturing, Conventional and Non-conventional machining processes, etc.
  4. Have completed more than 08 NPTEL courses in subjects related to BioMEMS and Microsystems, Advanced Manufacturing Techniques, Manufacturing process technology, Manufacturing systems technology etc.
  5. Associate Editor of “The nanotechnology and nanoscience”, 2011.
  6. Appointed as Associate Editor of “Journal of Micromanufacturing”. 2019.
  7. Boeing Outstanding Leadership certificate, 2009-2010, Boeing Corp. USA.
  8. Represented the Design Program in Stanford University for the Global Kickoff Event of ME310 course (2014).
  9. Nominated as a member of a review panel by the Indo-German Science and Technology Council for reviewing proposals related to water sensing and remediation. (2015).
  10. Currently also directing the channel 11 for Mechanical Engineering in Swayamprabha from IIT Kanpur
  11. Panelist in ASME International Mechanical Engineering Education Leadership Summit, MEED2022 on topic Engineering for entrepreneurship (Casting Job Seekers into Job Creators)
  12. Part of Modernization Board of ALIMCO, a Schedule ‘C’ Mini-ratna Category II Central Public Sector Enterprise.