PUBLICATIONS : (Total 99)

Published/accepted in refereed journals

1

Amarjit P. Kene, Sounak K. Choudhury, "Analytical modeling of tool health monitoring system using multiple sensor data fusion approach in hard machining" Measurement, Vol. 145, pp. 118-129, 2019.

2

Muhammed Muaz, Sounak Kumar Choudhury, "Experimental investigations and multi-objective optimization of MQL-assisted milling process for finishing of AISI 4340 steel", Measurement, Vol. 138, pp. 557-569, 2019.

3

Anand Prakash Dwivedi and Sounak Kumar Choudhury, "Surface morphology analysis of AISI-D3 tool steel using rotary tool electric discharge machining process" Int. J. Microstructure and Materials Properties, Vol. 14, No. 4, pages 361-373, 2019

4

Kashfull Orra and Sounak K. Choudhury, "Mechanistic modelling for predicting cutting forces in machining considering effect of tool nose radius on chip formation and tool wear land", International Journal of Mechanical Sciences, Volumes 142-143: Pages 255-268, 2018. https://doi.org/10.1016/j.ijmecsci.2018.05.004

5

Kashfull Orra, Sounak Kumar Choudhury, "Tribological aspects of various geometrically shaped micro-textures on cutting insert to improve tool life in hard turning process", International Journal of Mechanical Sciences, Volumes 142-143: Pages 255-268, 2018. https://doi.org/10.1016/j.ijmecsci.2018.05.004

6

Amlan Kar, Sounak Choudhury, Satyam Suwas, Satish V. Kailas, "Effect of interlayer in dissimilar friction stir welding of Aluminum to Titenium", International Journal of Material Characterization, Vol.145, Nov.2018, pp.402-412, DOI: https://doi.org/10.1016/j.matchar.2018.09.007

7

Rahul Kishore, Sounak K. Choudhury, Kashfull Orra, "On-line Control of Machine Tool Vibration in Turning Operation Using Electro-Magneto Rheological Damper", Journal of Manufacturing Processes, Vol. 31, pp. 187-198, 2018

8

Shikha Awasthi, Vijay K. Pal, S.K. Choudhury, "Effect of Surface Modifications by Abrasive Water Jet Machining and Electrophoretic Deposition on Tribological Characterization of Ti6Al4V Alloy" International Journal of Advanced Manufacturing Technology, 2018, Vol. 96 (5-8), pp. 1769-1777, DOI: 10.1007/s00170-017-1164-6, 2017

9

Anand P. Dwivedi, Sounak K. Choudhury, "Increasing the Performance of EDM Process Using Tool Rotation Methodology for Machining AISI D3 Steel" Procedia CIRP, 2016, Vol. 46, pp. 131-134.

10

Anand P. Dwivedi, Sounak K. Choudhury, "Improvement in the Surface Integrity of AISI D3 Tool Steel Using Rotary Tool Electric Discharge Machining Process" Procedia Technology, 2016, Vol. 23, pp. 280-287.

11

Kashfull Orra, Sounak K. Choudhury, "Development of Flank Wear model of cutting tool by using Adaptive Feedback Linear Control System on machining AISI D2 steel and AISI 4340 steel" Mechanical Systems and Signal Processing, 2016, Vol. 81, pp. 475-492.

12

Anand Prakash Dwivedi, Sounak Kumar Choudhury, "Effect of Tool Rotation on the MRR, TWR and Surface Integrity of AISI D3 Steel using Rotary EDM Process" Materials and Manufacturing Processes, 2016, Vol. 31(14), pp. 1844-1852 DOI: 10.1080/10426914.2016.1140198

13

M. Singh, Vijay Pal, S.K. Choudhury, "Methodology to predict the shape of the tool fabricated by AWJM process" Int Journal of Procedia CIRP, 2016, Vol. 41, pp. 898 - 901.

14

Gaurav Bartarya, Sounak Kumar Choudhury, "Effect of tool wear on white layer thickness and sub-surface hardness on hard turned EN-31 steel" International Journal of Machining and Machinability of Materials, 2016, Vol.18, No.5/6, pp. 483-500.

15

Satish Chinchanikar, S.K. Choudhury, "Comparative evaluations of nose wear progression and failure modes during hard turning under dry and near-dry cutting conditions" International Journal of Machining and Machinability of Materials, 2016, Vol.18, No.5/6, pp. 466-482

16

Vijay Pal, S.K. Choudhury, "Fabrication and analysis of complex-shape electrode/ tool for EDM by AWJM process" Int J of advances in material processing technology, 2015, Vol. 1(3-4), pp. 444-452.

17

Vijay Pal, S.K. Choudhury, "Fabrication of texturing tool to produce array of square holes for EDM by abrasive water jet machining ", International Journal of Advanced Manufacturing Technology, 2015, 10.1007/s00170-015-7875-7.(Springer)

18

Satish Chinchanikar, S.K. Choudhury, "Machining of hardened steel: Experimental investigations, performance modeling and cooling techniques: A review" International Journal of Machine Tools and Manufacture, Vol. 89, pp. 95-109, 2015.

19

Satish Chinchanikar, S.K. Choudhury, "Predictive modeling for flank wear progression of coated carbide tool in turning hardened steel under practical machining conditions" International Journal of Advanced Manufacturing Technology, 2015, Vol. 76, pp. 1185-1201.

20

Vijay Pal, S.K. Choudhury, "Fabrication and analysis of micro-pillars by abrasive water Jet machining". Int J of Procedia material science, 2014, Vol. 6, pp. 61-71.

21

Vijay Pal, S.K. Choudhury, "Surface characterization and machining of blind pocket on Ti6Al4v by abrasive water jet machining" Int J of Procedia material science, 2014, Vol. 5, pp. 1584-1592.

22

Satish Chinchanikar, S.K. Choudhury, "Experimental investigations to optimise and compare the machining performance of different coated carbide inserts" Proc IMechE Part B: J Engineering Manufacture, 2014, Vol. 228(9), pp.1104-1117.

23

Satish Chinchanikar, S.K. Choudhury, "Characteristics of wear, force and their inter-relationship: In-process monitoring of tool within different phases of the tool life" Procedia of Material Science, Vol. 5, pp. 1424-1433, 2014.

24

Satish Chinchanikar, S.K. Choudhury, "Evaluation of chip-tool interface temperature: Effect of tool coating and cutting parameters during turning hardened AISI 4340 steel" Procedia of Material Science, Vol. 6, pp. 996-1005, 2014.

25

Avdesh Pal, S.K. Choudhury, Satish Chinchanikar, "Machinability assessment through experimental investigation during hard and soft turning of hardened steel" Procedia of Material Science, Vol. 6, pp. 80-91, 2014.

26

Satish Chinchanikar, S.K. Choudhury, "Hard turning using HiPIMS-coated carbide tools: Wear behavior under dry and minimum quantity lubrication (MQL)" Measurement, Vol. 55, pp. 536- 548, 2014.

27

G. Bartarya, S.K. Choudhury, "Influence of Machining Parameters on Forces and Surface Roughness during Finish Hard Turning of EN 31 steel", Proc. of IMechE Part B, Journal of Engineering Manufacture, Sep 2014, Vol. 228, pp 1068-1080, DOI: 10.1177/0954405413500492

28

Satish Chinchanikar, S.K. Choudhury, "Modeling and evaluation of flank wear progression of coated carbide tools in turning hardened steels" International Journal of Manufacturing Technology and Management, Vol. 27, Nos. 1/2/3, 2013.

29

Satish Chinchanikar, S. K. Choudhury, "Investigations on machinability aspects of hardened AISI 4340 steel at different levels of hardness using coated carbide Tools" International Journal of Refractory Metals and Hard Materials, Vol. 38, pp.124-133, 2013.

30

Satish Chinchanikar, S. K. Choudhury and A.P. Kulkarni, "Investigation of chip-tool interface temperature during turning of hardened AISI 4340 alloy steel using multi-layer coated carbide inserts" Advanced Materials Research Vol. 701 (2013) pp 354-358

31

Satish Chinchanikar, S. K. Choudhury, "Wear behaviors of single-layer and multi-layer coated carbide inserts in high speed machining of hardened AISI 4340 steel" Journal of Mechanical Science and Technology, Vol. 27(5), pp. 1451-1459, 2013.

32

Satish Chinchanikar, S. K. Choudhury, "Effect of work material hardness and cutting parameters on performance of coated carbide tool when turning hardened steel: An optimization approach" Measurement (2012), Volume 46, Issue 4, May 2013, Pages 1572-158423.

33

G. Bartarya, S.K. Choudhury - "State of the Art in Hard Turning", Int. J. of Machine tools and Manufacture, Vol. 53, Issue 1, 2012 pp. 01-14. DOI:10.1016/j.ijmachtools.2011.08.019

34

Gaurav Bartarya, S.K.Choudhury, "Effect of cutting parameters on cutting force and surface roughness during finish hard turning AISI52100 grade steel", Procedia CIRP 1 (2012) 674-679.

35

Gaurav Bartarya, S.K.Choudhury - "A methodology to estimate the forces on the tool insert in finish hard turning", Int. J. of Machining and Machinability of Materials, Inderscience Publications Vol. 11, No. 3, pp.280-296, 2012.

36

G. Bartarya, S.K.Choudhury - "A regression model for force and surface roughness estimation during hard turning" Advanced Materials Research, Vols. 299-300 (2011), pp. 1167-1170, Trans Tech Publisher, Switzerland, doi: 10.4028/www.scientific.net/AMR299-300.1167.

37

Kumar Sambhav, Abhishek Kumar, S.K. Choudhury - "Mechanistic Force Modeling of Single-Point Cutting Tool in terms of Grinding Angles" International Journal of Machine Tool and Manufacture, Volume 51, Issues 10-11, October-November 2011, Pages 775-786.

38

Rajnish Kumar, S.K. Choudhury - "Prevention of Wire Breakage in Wire EDM" International Journal of Machining and Machinability of Materials, Vol.9, Nos.1/2, pp. 86-102, 2011.

39

S.K. Thandra, S.K. Choudhury - "Effect of Cutting Parameters on Cutting Force, Surface Finish and Tool Wear in Hot Machining" International Journal of Machining and Machinability of Materials, Vol.7, Nos.3/4, pp.278-291, 2010.

40

Sourabh Kumar Saha, S.K. Choudhury - "Experimental Investigation and Empirical Modeling of the Dry Electric Discharge Machining Process" International Journal of Machine Tools and Manufacture, Vol. 49 (3-4), pp.297-308, March 2009.

41

A. Banerjee, E.V. Bordatchev, S.K. Choudhury - "On-line monitoring of Surface Roughness in turning operations with a bifurcated opto-electrical transducer" International Journal of Manufacturing Research, Vol. 4/1, pp.57-73, 2009.32.

42

K.V.B.S. Kalyan Kumar, S.K. Choudhury - "Investigation of Tool Wear and Cutting Force in Cryogenic Machining using Design of Experiments" Journal of Materials Processing Technology, Vol. 203(1-3), pp.95-101, 2008. (available on-line: http://dx.doi.org/10.1016/j.jmatprotec.2007.10.036)

43

Sanjeev Kumar, S.K. Choudhury - "Prediction of Wear and Surface Roughness in Electro-Discharge Diamond Grinding" Journal of Materials Processing Technology, V. 191, pp. 206-209, 2007.

44

S.K. Choudhury, J.B. Bajpai - "Investigation in Orthogonal Turn Milling towards better Surface Finish" Journal of Materials Processing Technology, V. 170, pp. 487-493, 2005.

45

S.K. Choudhury, P. Srinivas - "Tool Wear Prediction in Turning" Journal of Materials Processing Technology, V. 153-154, pp. 276-280, 2004.

46

S.K. Choudhury, Gaurav Bartarya - "Role of temperature and surface finish in predicting tool wear using neural network and design of experiments" International Journal of Machine Tools and Manufacture, V. 43, pp. 747-753, 2003.

47

V.K.Jain, S.K. Choudhury and K.M. Ramesh - "On the machining of Alumina and Glass", Int. Journal of Machine Tools and Manufacture, Vol. 42, pp.1269-1276, 2002.

48

S.K. Choudhury, V.K. Jain, S. Rama Krishna - "On-line Monitoring of Tool Wear and Control of Dimensional Inaccuracy in Turning" Transaction of ASME: Journal of Manufacturing Science and Engineering, Vol. 123, pp. 10-12, February 2001.

49

S.K. Choudhury and K.K.Kishore - "Tool Wear Measurement in Turning using Force Ratio" International Journal of Machine Tools and Manufacture, V.40, No. 6, pp. 899-909, 2000.

50

S.K. Choudhury and Ganga Raju - "Investigation into Crater Wear in Drilling" International Journal of Machine Tools and Manufacture, V.40, No. 6, pp. 887-898, 2000.

51

S.K. Choudhury and Subhashree Rath - "In-process Tool Wear Estimation in Milling using Force Model" Journal of Materials Processing Technology, V.99 (1-3), pp. 113-119, 2000.

52

S.K. Choudhury and K.S. Mangrulkar - "Investigation of orthogonal turn milling for the machining of rotationally symmetrical workpieces" Journal of Materials Processing Technology, V.99 (1-3), pp. 120-128, 2000.

53

S.K. Choudhury, V.K.Jain and Ch.V.V.Rama Rao - "On-line monitoring of Tool Wear in Turning using Neural Network" International Journal of Machine Tools and Manufacture, vol.39(3), 1998, pp.489-504

54

S.K. Choudhury and Appa Rao - "Optimization of Cutting Parameters for Maximising Tool Life", International Journal of Machine Tools and Manufacture, vol.39(2), 1998, pp.343-353

55

S.K.Choudhury, Eswar Kumar and A.Ghosh - "A Scheme of Adaptive Turning Operation" Journal of Materials Processing Technology, V.87 (1-3), 1999, pp. 119-127.

56

S.K. Choudhury, V.K. Jain and Manoj Gupta - "Electrical Discharge Diamond Grinding of High Speed Steel" International Journal of Machining Science and Technology, V.3(1), 1998

57

S.K.Choudhury, N.N.Goudimenko, V.A. Kudinov - "On-line control of machine tool vibration in turning" - International Journal of machine Tools and Manufacture, Vol.37, No.6, 1997, pp.801-811.48.

58

S.K. Choudhury, V.K. Jain, P. Dixit - "Application of fibre optics in profile and burr measurement" - Journal of the Institution of Engineers (India), Vol.76, Nov.1995, pp.41-45.

59

S.K. Choudhury, Jose Mathew "Investigations of the Non uniform Insert Pitch on Vibration during Face Milling" - International Journal of Machine Tools and Manufacture, Vol.35, No.10, 1995, pp.1435-1444.

60

S.K. Choudhury, S.Ramesh "On line Tool Wear Sensing and Compensation in Turning" - Journal of Mat. Processing Tech., V.49, No.3-4, 1995, pp.247-254

61

S.K. Choudhury, M.S. Sarath "On line Machine Tool Vibration during Turning Operation" Journal of Materials Processing Technology, vol.47, No.3-4, 1995, pp.251- 259.

62

V.K. Jain, P.S. Rao, S.K. Choudhury, K.P. Rajurkar " Experimental investigations into travelling wire ECM spark machining of composites " Trans.of ASME, Journal of Engg. for Industry, Vol.113, No.1, Feb.1991, pp. 75 84.

63

Anuj Sanjanwala, S.K. Choudhury, V.K. Jain "On line tool wear sensing and compensation during turning operation." Precision Engineering, April, 1990, Vol.12, No.2, pp. 81 84.

64

Sounak Kumar, Goudimenko N.N. "Investigation of automatic control system of indices of dynamic performances of a turning lathe" Investigation of technology and design of machine parts, Moscow, P.F.U., 1985, pp.136 140. (in Russian)

65

Sounak Kumar, Goudimenko N.N. "Experimental procedure of automatic control system evaluation." Investigation of technology and design of machine parts, Moscow, P.F.U., 1985, pp.130 135. (in Russian)

66

Sounak Kumar, Goudimenko N.N. "Investigation of adaptive control system in a mathematical model". Problems of increasing quality of metal cutting equipment, Moscow, P.F.U., 1984, pp.64 69. (in Russian)

67

Sounak Kumar, Goudimenko N.N. "Methods of automatic control systems of metal cutting process in machine tools". Problems of static and dynamic characteristics of metal cutting equipment, Moscow, P.F.U., 1983, pp.129 132. (in Russian)

Published in International/National conference proceedings

68

Anand Prakash Dwivedi, Sounak Kumar Choudhury, "Increasing the Performance of EDM Process Using Tool Rotation Methodology for Machining AISI D3 Steel" 7th HPC 2016 - CIRP Conference on High Performance Cutting-2016 (Germany), CIRP, Elsevier, Vol. 46, pp. 131-134. DOI: 10.1016/j.procir.2016.03.207

69

Amarjit Kene, Kashfull Orra, S.K. Choudhury, "Experimental Investigation of Tool Wear Behavior of Multi‐Layered Coated Carbide Inserts Using Various Sensors in Hard Turning Process" 8th IFAC Conference on Manufacturing Modeling, Management and Control (MIM 2016), University of Technology of Troyes, France, June 28-30, 2016

70

Anand Prakash Dwivedi, Sounak Kumar Choudhury, "Improvement in the Surface Integrity of AISI D3 Tool Steel using Rotary Tool Electric Discharge Machining Process" 3rd International Conference on Innovations in Automation and Mechatronics Engineering, ICIAME 2016 (India), Procedia Technology, Elsevier, Vol. 23, pp. 280-287. DOI:10.1016/j.protcy.2016.03.028

71

Anand Prakash Dwivedi, Sounak Kumar Choudhury, "Comparative Assessment of MRR, TWR and Surface Integrity in Rotary and Stationary Tool EDM for Machining AISI D3 Tool Steel" Proceedings of the World Congress on Engineering 2015 Vol II pp. 1219-1224 WCE 2015, July 1 - 3, 2015, Imperial College London, U.K.

72

Amarjit Prakashrao Kene, S.K. Choudhury, "Behaviour of cutting forces in hard turning considering effect of tool wear on principal flank, auxiliary flank and rake faces: individually and in combination" 5th International & 26th All India Manufacturing Technology, Design and Research (AIMTDR 2014) Conference, Indian Institute of Technology Guwahati, INDIA, Dec. 12th-14th, 2014, Vol. 1, pp. 516-1 to 516-6.

73

Satish Chinchanikar and S.K. Choudhury "Comparative evaluations of tool nose wear progression under dry and near-dry cutting conditions during hard turning through experimentation and mathematical modeling" 5th International & 26th All India Manufacturing Technology Design and Research, (AIMTDR-2014) Conference, India, 8th-9th December, 2014.

74

Satish Chinchanikar and S.K. Choudhury "Multi-objective optimization of cutting parameters: A desirability function approach" International Colloquium on Materials, Manufacturing and Metrology at IIT Madras, Chennai, India, 8th-9th August 2014 (ICMMM 2014), ISBN 978-93-80689-18-0.

75

Satish Chinchanikar, S.K. Choudhury, "Characteristics of wear, force and their inter-relationship : In-process monitoring of tool within different phases of the tool life" International Conference on Advances in Manufacturing and Materials Engineering at NIT Suratkal, India, 27th-29th March 2014 (AMME 2014).

76

Avdesh Pal, S.K. Choudhury, Satish Chinchanikar, "Machinability assessment through experimental investigation during hard and soft turning of hardened steel" International Conference on Materials Processing and Characterisation at GRIET Hyderabad, India, 8th-9th March 2014 (ICMPC 2014).

77

Satish Chinchanikar, S.K. Choudhury, "Evaluation of chip-tool interface temperature: Effect of tool coating and cutting parameters during turning hardened AISI 4340 steel" 3rd International Conference on Materials Processing and Characterisation at GRIET Hyderabad, India, 8th-9th March 2014 (ICMPC 2014).

78

Gaurav Bartarya, S.K.Choudhury, "Effect of Tool Wear on White Layer Thickness and Subsurface Hardness on Hard Turned EN31 Steel", Proc. of 5th Intl. and 26th National AIMTDR conf., Dec.12-14, 2014, IIT Guwahati, pp.854-1 to 854-6

79

Shweta Singh, V.K.Jain, S.K.Choudhury, (2013), Quality aspects of electrochemical micro-drilling with insulated tool and masked workpiece, Proceedings of IMECE-13 ASME 2013 International, ASME International Mechanical Engineering Congress & Exposition, November 15-21, 13, San Diego, USA.

80

G. Bartarya, S.K.Choudhury, "Finite Element Analysis of Residual Stresses in Hard turning of AISI 52100 Steel using Worn-out CBN Tools", Proceedings of 2nd Int. Conf. IRAM 2013, Dec. 16-18, 2013, IIT Indore, pp 411-417

81

Vijay Kumar Pal, Sounak Kumar Choudhury, Punnet Tandon, "Time reduction by using square path and elliptical path in controlled depth milling using abrasive water jet machining", International Conference on Innovations in Design and Manufacturing (InnDeM 2012), IIITDM Jabalpur, India, December 05-07, 2012.

82

Satish Chinchanikar, S. K. Choudhury and A.P. Kulkarni, "Investigation of chip-tool interface temperature during turning of hardened AISI 4340 alloy steel using multi-layer coated carbide inserts" International Conference on Key Engineering Materials (ICKEM 2013), March 8 - 9, 2013, Kota Kinabalu, Malaysia.

83

Satish Chinchanikar, S. K. Choudhury, "Investigation of the effects of different coated carbide inserts on surface roughness and cutting force in turning AISI 4340 steel": 4th International & 25th All India Manufacturing Technology Design and Research, (AIMTDR-2012) Conference, India, 14th-16th December, 2012, Vol. 1: 249-254

84

Gaurav Bartarya, S.K.Choudhury, "Influence of machining parameters on forces and surface roughness during finish hard turning AISI 52100 grade steel", Proc. of 4rd Intl. and 25th National AIMTDR conf., Dec.14-16, 2012, Jadavpur Univ., Kolkata pp.293-298

85

Satish Chinchanikar, S. K. Choudhury, "Flank wear progression modeling in turning hardened steel using multi-layer coated carbide inserts" International Conference on Innovations in Design and Manufacturing, at PDPM IIIDM Jabalpur, India, 5th-7th December 2012 (InnDeM 2012).

86

Gaurav Bartarya, S.K.Choudhury, "Effect of Cutting Parameters on Cutting Force and Surface Roughness during Finish Hard Turning Aisi52100 Grade Steel", Paper no. 157, 5th CIRP Conf. on High Performance Cutting, 4-7 June, 2012,ETH Zurich. Switzerland.

87

Gaurav Bartarya, S.K.Choudhury, "A Regression Model for Force and Surface Roughness Estimation during Hard Turning", Int. Conf. on Materials and Manufacturing, Liaoning Univ. of Technology Liaoning Jinzhou, China Sep. 7-9, 2011(#D080).

88

Gaurav Bartarya, S.K.Choudhury, "Modeling the Forces in Finish Hard Turning considering Tool Flank Wear", Proc. of 3rd Intl. and 24th National AIMTDR conf., Dec.13-15, 2010, Andhra University College of Engineering (A), Visakhapatnam, pp81-86

89

Gaurav Bartarya, S.K.Choudhury, "Modeling of Cutting Forces considering Chip-Tool Interaction and Flank Wear in Finish Hard Turning" 2nd CIRP Intl. conf. on Process Machine Interactions, June 10-11, 2010, Univ. of British Columbia, Vancouver, CANADA.

90

Mamilla Ravi Sankar, S.K. Choudhury - "High Speed Turning with Minimum Quantity Cutting Fluid", Proceedings of International Conference on Advanced Manufacturing Technologies, pp. 97-106, 29-30 November 2007, CMERI, Durgapur, India.

91

Banerjee, A., Bordatchev, E.V., Choudhury. S.K. - 2006, in IFIP International Federation for Information Processing, Volume 220, Information Technology for Balanced Manufacturing Systems, ed. She, W., (Boston:Springer), pp. 489-498.

92

Sanjeev Kumar, S.K. Choudhury - "Prediction of Wear and Surface Roughness In Electro-Discharge Diamond Grinding" - Proceedings of AMPT 2006, Jul 30-Aug 3, 2006, Las Vegas, USA.

93

Sunil Jha, V.K. Jain, S.K. Choudhury - "On the performance of Abrasive Flow finishing process", Proceedings of Precision Engineering Conference held at CMTI Bangalore, pp. 216-223, 2003.

94

S.K. Choudhury, P. Srinivas - "Tool Wear Prediction in Turning" Proceedings of AMPT 2003, Jul 8-11, 2003, Dublin, Ireland.

95

V.V. Nesarikar, V.K.Jain, S.K.Choudhury - "Experimental Investigations into electro-chemical spark machining of kevlar epoxy composites" - Proc. of the X annual meeting, The American Society for Precision Engineering, October 15-20, V.12, 1995, Austin, Texas, pp.292-295.

96

V.Nesarikar, V.K.Jain, S.K.Choudhury - "Travelling wire Electro-Chemical Spark Machining of thick sheets of Kevlar-Epoxy Composites" - Proc. 16th. All India Manufacturing Technology Design and Research Conference held at Bangalore, Dec.1994, pp.672-677. (Received Best Paper Award in the Conference)

97

Ngo Sy Loc, S.K.Choudhury, B.Sahay "A new Electro hydro mechanical stepping motor, Part 2 Theoretical aspects of the motor" Proc. of 20th.National Conf. on Fluid Mechanics and Fluid Power, Dec. 1993, Fluid Control Research Institute, Kanjikode West, India, pp.C16-1 - C16-7.

98

Ngo Sy Loc, S.K.Choudhury, B.Sahay "A new Electro hydro mechanical stepping motor, Part 1 Working principle of the motor and its design" Proc. of 20th.National Conf. on Fluid Mechanics and Fluid Power, Dec. 1993, Fluid Control Research Institute, Kanjikode West, India, pp.C15-1-C15-4.

99

S.K.Choudhury "Control of machine tool vibration by feed back neutralizer." 13th. AIMTDR conference, Jadavpur university, Calcutta.1988, pp.A53-A57.

Papers under review in the International Journals

1

S.K. Choudhury and Vikas Gupta - "Optimization of Cutting Parameters using Neural Network"

2

S.K. Choudhury, Vivek Muttur, Thermo-emf analysis of flank wear in turning

Book Chapters

1

Anand Prakash Dwivedi, Sounak Kumar Choudhury, "Assessment and Comparison of Machining Performance in Rotary and Stationary Tool EDM for Machining AISI D3 Tool Steel", Transactions on Engineering Technologies, Editor: Sio-iong Ao, Gi-Chul Yang, Len Gelman Springer, Singapore, ISBN: 978-981-10-1087-3, pp. 95-109, June 2016. DOI: 10.1007/978-981-10-1088-0_8

2

S.K. Choudhury, S. Chinchanikar, "Finish Machining of Hardened Steel" in the book: Reference Module in Materials Science and Materials Engineering, Editor: Hashmi Saleem, Publisher: Elsevier, 2016.

3

Bartarya Gaurav, S.K. Choudhury, "New Surface Integrity Issues in Finish Hard Turning" in the book: Reference Module in Materials Science and Materials Engineering, Editor: Hashmi Saleem, Publisher: Elsevier, 2016.

4

Bartarya Gaurav, S.K. Choudhury, "Tool wear progression and its effect on finished hard-turned products" in the book: Reference Module in Materials Science and Materials Engineering, Editor: Hashmi Saleem, Publisher: Oxford, Elsevier, 2016, pp. 1-10, ISBN: 978-0-12-803581-8