H-Index=32: Total citations:3567; No. of Publication in refereed journals: One hundred Twenty Seven (127); No. of Publication in Proceedings: Fifty Seven(57) (as on 1st April, 2023).

Video lectures/ on-line courses

(1) National Programme on Technology Enhanced Learning (NPTEL)

•   D. Mazumdar and S.C. Koria: Steelmaking, http://nptel.ac.in/syllabus/113104013/

(1) Youtube Channel and Video Lectures     

•  https://youtube.com/channel/UCPssttUWomJxGNSPAVbmpPg

Books

•  (1) P. Assis, B. Deo, D. Mazumdar and N. Chakraborty: Modelling and Simulation of Iron and Steelmaking, Revista Escola de Minas, Ouro Preto, Brazil,1998.
•  (2) D. Mazumdar and J. W. Evans: Modeling of Steelmaking Processes, CRC Press, Boca Ranton, Florida,USA ,2009.

•  (3) D. Mazumdar and J. W. Evans: Solution manual for Modeling of Steelmaking Processes, CRC Press, Boca Raton, Florida, USA , 2009.

•  (4) D. Mazumdar: A first course in Iron and Steelmaking, Universities Press, Hyderabad, 2015.
   

Book Chapters

•  (1) Dipak Mazumdar: Modelling of secondary steel making processes, in " Secondary steelmaking " by A.Ghosh, CRC Press ,2000, pp.199-217

Review Papers

•  (1) Dipak Mazumdar and R.I.L.Guthrie: The physical and mathematical modelling of gas stirred ladle systems, ISIJ International, Vol.35(1),1995,pp.1-20.

•  (2) Dipak Mazumdar and Roderick I.L.Guthrie: The physical and mathematical modelling of continuous casting tundish systems , ISIJ International, Vol. 39(6), 1999, pp.525-548.

•  (3) D.Mazumdar and J.W.Evans: Macroscopic models for gas stirred ladles: a Review ISIJ International , pp.447-461, 2004

•  (4) Dipak Mazumdar: " Review, analysis and modelling of continuous casting  tundish systems", Steel Research International (Special issue; Ed. Prof. Zhou Chen), First published on line October 2018).  

•  (5) Subham Ranjan, Dipak Mazumdar, Indra Nath Chakraborty, Saumen Sinha and Raja Sarkar: "Review and analysis of metallurgical processes in blast furnace main trough and trough performances", Trans. IIM, Vol.75, 2022.     

Feature Articles

•  (1) D. Mazumdar: The role of modelling in steelmaking Metal News, Indian Institute of Metals, Vol. 1&2, pp. 16-20 and 5-11, 2004.

•  (2) Dipak Mazumdar: Industry-research-academia synergy: An overview of industry aided collaborative research in steelmaking at IIT Kanpur,  Metal News, 1, 2012, pp. 14-20.

•  (3) Dipak Mazumdar, Prince K. Singh, Rishikesh Mishra amd Suvam Mukherjee: " Enhancing ladle shroud performance during industrial steel teeming practices", Journal of Indian Refractory Makers Association (IRMA), Vol.3, 2018, pp. 67-75.

•  (4) D. Mazumdar: "Shrouded, ladle to tundish transfer practices for better product quality and steel plant perfromance, IIM Metal News, Vol. 22, 2019, No. 9, pp. 16-21.

•  (5) D. Mazumdar: "Special steels and the competitiveness of the Indian special steel sector". Metal News, Indian Institute of Metals, Vol. 4 and 5, 2020, pp. 9-21.

Letters and Discussion

•  (1) Dipak Mazumdar and R.I.L Guthrie: "Considerations concerning the numerical computation of mixing times in steelmaking ladles" ISIJ International, Vol. 33(4), 1993, pp. 513-516.

•  (2) Dipak Mazumdar and R.I.L Guthrie: "A note on the determination of mixing times in gas stirred ladle systems", ISIJ International, Vol. 35(2), 1995, pp. 220-222.

•  (3) Dipak Mazumdar and R.I.L Guthrie: Discussion on "Mixing time and fluid flow phenomena in liquids of varying kinematic viscosities agitated by bottom gas injection", Metallurgical and Materials Transactions, Vol. 30B, 1999, pp. 349-351.

•  (4) Dipak Mazumdar and R.I.L Guthrie: Discussion on "Decay of fluid motion in a filling ladle after tapping" Metallurgical and Materials Transactions, Vol. 30B, 1999, pp.628-629.

•  (5) Dipak Mazumdar and R.I.L Guthrie: Discussion on "Review of Physical and Numerical Approaches for the Study of Gas Stirring in Ladle Metallurgy", Materials and Metallurgical Transactions Vol. 51B, 2020, pp. 412-416.

•  (6) D. Mazumdar and S. A. Argyropoulos: Discussion on "Numerical Study of Desulphurization Behavior during Kanabara Reactor Hot Metal Treatment", Materials and Metallurgical Transactions Vol. 53B, 2022, pp. 1958-1962.

TRANS. IIM Award Winning Papers

•  (1) Dipak Mazumdar and Ravi Verma: A predictive mathematical model for analysis of continuous casting of steel, Trans. I.I.M, Vol. 42(5), 1989, pp. 447-459 (Kamani Gold Medal, 1989).

•  (2) Dipak Mazumdar: "Some fundamental considerations concerning gas injection operations in steelmaking ladles", Transactions of the Indian Institute of Metals, Vol. 53, 2000, pp. 49-61. (SAIL Gold Medal, 2001).

•  (3) Dipak Mazumdar, O. P. Singh, Joy Dutta, Shaktimoy Ghosh, D. Satish and S. Chakraborty: "Reduction of tundish skull and yield improvement in steel plants through physical modeling of steelmaking tundish system", Transactions of the Indian Institute of Metals, Vol. 64(6), 2011, pp. 593-606. (SAIL Gold Medal, 2012).

•  (4) Ankur Agnihotri, Prince Kumar Singh, Rishikesh Mishra and Dipak Mazumdar: "Steady state materials and enthaloy balance: applications to ferroalloy production industrial scale validation". Transactions  Indian Institute of Metals, Vol. 72, 2019, pp. 455-473 (SAIL Gold Medal, 2020).

• 1). Dipak Mazumdar and Ahindra Ghosh: Production of semi-killed steel with optimum porosity, Part II: Experimental measurements, Trans.I.I.M., Vol.38(1),1985, pp.55-63.

• (2).Dipak Mazumdar and R.I.L.Guthrie: Hydrodynamic modelling of some gas injection operations in ladle metallurgy operations, Metall.Trans., Vol.16B,1985,pp.83-90.

• (3).Dipak Mazumdar and R.I.L.Guthrie: The hydrodynamics of the C.A.S.method of alloy addition, Ironmaking and Steelmaking, Vol.12(6),1985,pp.256-264.

• (4) Dipak Mazumdar and R.I.L.Guthrie: Numerical computation of flow and mixing in ladle metallurgy steelmaking operations (the C.A.S.method), Applied Mathematical Modelling, Vol.10(1),1986,pp.25-32.

• (5) Dipak Mazumdar and R.I.L.Guthrie: On the reduction in steady translational drag forces in bubbly Newtonian liquid, Chemical Engineering Science, Vol.41(11), 1986, pp.2965-2967.

• (6) Dipak Mazumdar and R.I.L.Guthrie: Mixing models for gas stirred ladle systems, Metall.Trans., Vol.17B, 1986,pp.725-733.

• (7) Nakajima, Dipak Mazumdar and R.I.L.Guthrie: Effect of overlying slag phase liquids on the hydrodynamics of gas stirred ladle systems,Tetsu-to-hagane, 1987, pp.S949.

• (8) Dipak Mazumdar and R.I.L.Guthrie: An analysis of numerical methods for solving the particle trajectory equation, Applied Mathematical Modelling, 1988, pp.398-401.

• (9) Dipak Mazumdar, H.Nakajima and R.I.L.Guthrie: Possible roles of upper slag phases on the fluid dynamics of gas stirred ladles, Metall.Trans., Vol.19B, 1988,pp.705-708.

• (10) Dipak Mazumdar: A consideration about the concept of effective thermal conductivity in continuous casting, ISIJ International, Vol.29(6), 1989, pp.524-528.

• (11) Dipak Mazumdar: On effective viscosity models for gas stirred ladle systems, Metall.Trans, Vol.20B,1989, pp.967-969.

• (12) Dipak Mazumdar: Dynamic similarity considerations in gas stirred ladle systems, Metall.Trans., Vol. 21B,1990,pp.925-928.

• (13) Dipak Mazumdar and R.I.L.Guthrie: Hydrodynamic modelling of slag - metal interactions in gas stirred ladle systems,Trans.I.I.M, Vol.43(3), 1990, pp.139-148.

• (14) Dipak Mazumdar, S.K.Kajani and A.Ghosh: Mass transfer between solid and liquid in vessels agitated by bubble plume, Steel Research, Vol.61(8), 1990, pp.339-346.

• (15) Dipak Mazumdar and S.Ramani: Computation of transient diffusion phenomena via FORTRAN library routines, Trans. I.I.M., Vol.43(3), 1990, pp.183-186.

• (16) Dipak Mazumdar and R.I.L.Guthrie: Hydrodynamic modelling of gas stirred ladle systems, Trans.I.I.M., Vol.44(6), 1991,pp.139-149.

• (17) D.Balaji and Dipak Mazumdar: Numerical computation of flow phenomena in gas stirred ladle systems, Steel Research, Vol.62(1),1991, pp.16-23.

• (18) A.K.Singh and Dipak Mazumdar: Comparison of several numerical prediction methods for thermal fields during phase transformation of plain carbon steel, ISIJ International, Vol.3(12), 1991, pp.1441-1445.

• (19) Dipak Mazumdar, Neeraj Kumar and Vinaya Verma: Heat and mass transfer rates between solid and liquid in gas stirred ladle systems, Ironmaking and Steelmaking, Vol.19,1992, pp.152-155.

• (20) A.K.Singh and Dipak Mazumdar: Mathematical modelling of thermal fields during heat treatment of steel, Steel Research, Vol.63(5), 1992, pp.194-200.

• (21) Dipak Mazumdar, Tanuj Narayan and Paramjit Bansal: Mathematical modelling of mass transfer rates between solid and liquid in high temperature gas stirred melts, Applied Mathematical Modeling, Vol.16(5),1992, pp.255-262.

• (22) D.Balaji and Dipak Mazumdar: Mathematical modelling of flows induced by co-axial submerged and impinging gas jet systems, Trans.I.I.M., Vol.45(1),1992, pp.25-32.

• (23) A.Bhattacharjee and Dipak Mazumdar: Mathematical modelling of fluid flow, alloy dissolution and mixing in industrial argon stirred ladles, Trans.I.I.M., Vol.45(3), 1992, pp.153-
  161.

• (24) G.G.Roy, V.Singh and Dipak Mazumdar: Mathematical modelling of fluid flow in filling ladles, Trans.I.I.M., Vol.45(3), 1992, pp.147-152.

• (25) Dipak Mazumdar, R.I.L.Guthrie and Y.Sahai: On mathematical models and numerical solutions of gas stirred ladle systems, Applied Mathematical Modelling, Vol.17(5), 1993, pp. 255-262.

• (26) M.Tanaka, Dipak Mazumdar and R.I.L.Guthrie: Motions of alloying additions during furnace tapping in steelmaking processing operations, Metall.Trans., Vol.24B, 1993, pp.639-648.

• (27) Dipak Mazumdar and R.I.L.Guthrie: Motions of alloying additions in the C.A.S Steelmaking operations, Metall.Trans., Vol.24B, 1993, pp.649-655.

• (28) Dipak Mazumdar and R.I.L.Guthrie: On the numerical calculation and non-dimensional representation of velocity fields in bubble stirred ladle systems, Steel Research, Vol.64(6), 1993, pp.286-291.

• (29) S.K.Choudhary, Dipak Mazumdar and A.Ghosh: Mathematical modelling of heat transfer phenomena in continuous casting of steel, ISIJ International, Vol.33(7),1993, pp.764-774.

• (30) Dipak Mazumdar: On the mathematical approximation of infinitely long cylinders in rate phenomena, Trans.I.I.M , Vol.46(6),1993,pp.387-390.

• (31) Dipak Mazumdar: An improved quasi single phase calculation procedure for hydrodynamic modelling of gas stirred ladle system, Trans.I.I.M.,Vol.46(6),1993,pp.353-362.

• (32) Dipak Mazumdar and R.I.L.Guthrie: A comparison of three mathematical modelling procedures for simulation of fluid flow phenomena in bubble stirred ladle systems, Metall.Trans., Vol.25B, 1994, pp.308-312.

• (33) Dipak Mazumdar and R.I.L.Guthrie: An assessment of a two phase calculation procedure for hydrodynamic modelling of submerged gas injection in ladles, ISIJ International, Vol.34(5), 1994,pp.384-392.

• (34) S.K.Choudhary and Dipak Mazumdar: Mathematical modelling of transport phenomena in continuous casting of steel, ISIJ International, Vol.34(7), 1994, pp.584-592.

• (35) S.K.Choudhary and Dipak Mazumdar: Mathematical modelling of fluid flow, heat transfer and solidification phenomena in continuous casting of steel, Steel Research, Vol.66(5),1995, pp.199-205.

• (36) Dipak Mazumdar, Guler Yamanoglu, Ramani Sankarnarayanan and Roderick.I.L.Guthrie: Similarity considerations in the physical modelling of steelmaking tundish systems, Steel Research, Vol.66(1),1995,pp.14-19

• (37) Dipak Mazumdar and R.I.L.Guthrie: On the numerical computation of turbulent fluid flow in C.A.S. steelmaking operations, Applied mathematical Modelling, Vol.19(9),1995,pp.519-524.

• (38) Dipak Mazumdar: A correlation for the estimation of mass transfer rates from solids in gas stirred ladles, Steel Research,Vol.67(7),1996,pp.263-267.

• (39) V.Sudhakar and D.Mazumdar: A unified representation of two phase plume characteristics in gas stirred ladle systems , Materials and Metallurgical Transactions, Vol.27B,1996,pp.704-708.

• (40) Dipak Mazumdar, Santanu Das and Sudhendu Bajpayee: Mixing time correlation for gas stirred ladle systems , ISIJ International, Vol.37(2), 1997, pp.194-196.

• (41) A.K.Singh and D.Mazumdar: Mass transfer between solid and liquid in gas stirred ladle systems, Materials and Metallurgical Transactions,27B,1997,pp.95-102

• (42) Himansu Singh and Dipak Mazumdar: On the modelling of flow phenomena in air agitated Pachuka tank, Materials and Metallurgical Transactions, Volume 28B,1997, pp.727-731.

• (43) Dipak Mazumdar, Guller Yamanoglu and Roderick.I.L. Guthrie: Hydrodynamic performance of Metallurgical tundish systems: A comparative study of three different tundish designs , Steel Research, Vol.68(7), 1997, pp.293-300.

• (44) Chaitanya Bhanu and Dipak Mazumdar: Numerical prediction of melting rates in gas bubble driven systems , Trans. I.I.M., Vol.50, 1997, pp.249-258.

• (45) Kamalesh Mandal and Dipak Mazumdar: Dimensional analysis and mixing phenomena in bubble stirred ladles, ISIJ International , Vol.38(10),1998, pp.1150-1152

• (46) G.Yamanoglu, R.I.L.Guthrie and Dipak Mazumdar: Study of powder injection into water using an on line particle detection system, Canadian Metallurgical Quarterly, Vol.38, No.1, 1999, pp.61-80.

• (47) Chenguo Tian, Dipak Mazumdar and R.I.L.Guthrie: "Analyses of the dynamic processes of liquid metal filtration", Metallurgical and Materials transactions, Vol.30B, 1999, pp.891-890.

• (48) Dipak Mazumdar and R.I.L.Guthrie: "Mixing time and correlations for gas stirred ladle systems", ISS Transactions,Vol.9,1999,pp.89-96.

• (49) Chaitanya Bhanu and Dipak Mazumdar: "On the prediction of melting rates in gas bubble driven systems" , Trans. I.I.M., Vol.52,1999,pp.159-163.

• (50) Daniel Sunder, Dipak Mazumdar and V.S.S.R. Murthy: "Modelling of composite growth in directed melt nitridation processes", Materials and Metallurgical Transactions A, Vol.30A, 1999, pp.2951-2958..

• (51) Dipak Mazumdar: "On the estimation of heat transfer coefficients in metallic melts", Transactions of the Indian Institute of Metals ", Vol.52,1999, pp.403-411.

• (52) Dipak Mazumdar, H.B.Kim and R.I.L.Guthrie: " Modelling criteria for flow simulation in gas stirred ladle systems: An experimental study" , Ironmaking Steelmaking , Vol.27,2000, pp.302-309.

• (53) S.A.Argyropoulos, A.C.Mikrovas, D.Mazumdar and D.Doutre: Dimensionless correlations for forced convection in liquid metals , Part II : Two phase flows, Metallurgical and Materials Transactions, 32B, 2001, pp347-352.

• (54) Ashish Robert and Dipak Mazumdar: Physical and Mathematical modelling of Flow and Residence Time Distributions (RTD) in Different Tundish Design, Steel Research, Vol.72,2001, pp.97-105

• (55) Kamalesh Mandal and Dipak Mazumdar: The role of vessel aspect ratio on the fluid flow and mixing phenomena in CAS steelmaking operation: a physical & mathematical modelling investigation, Trans. I.I.M , Vol.54,2001,pp105-115 .

• (56) D.Mazumdar, R.Yadav and B.B.Mahato: Transient flow and mixing in steelmaking ladles during the initial period of gas stirring, ISIJ International ,Vol.42,2002, pp.106-108.

• (57) D.Mazumdar: On the estimation of plume rise velocity on gas stirred ladles, Materials and Metallurgical Transactions , Vol.33B, 2002, pp. 937-941

• (58) D.Mazumdar, Kamlesh K Singh and Ahindra Ghosh: Measurement and computation of Drag forces in thermo-gravimetric studies Metals and Materials Transactions, Vol.33B, 2002, pp.891-896.

• (59) D.Mazumdar, D.Steingard, C.Seybert and J.W.Evans:Transient flows in gas stirred vessels during the initial and post gas injection periods , ISIJ International ,Vol.43,2003, pp.132-134.

• (60) Projit Mitra, Dipak Mazumdar, Gaurav K.Gupta, Atul Tamrakar and Jayanta Mandal: Development of a three dimensional turbulent flow calculation procedure and its application to ladles stirred with dual porous plug@, Trans. IIM, Vol.56, 2003, pp.95- 105

• (61) D.Mazumdar and J.W.Evans: "Some considerations concerning empirical correlations for plume (spout) eye area in slag covered metallic melts", ISIJ International,Vol.43, 2003, pp.2076-2078.

• (62) D. Mazumdar and J.W.Evans: "A model for estimating exposed plume eye area in steel refining ladles covered with thin slag" Materials and Metalllurgical Transactions, Vol.35B, 2004, pp.400-404

• (63) Anil Kumar, S.C.Koria and D.Mazumdar: "An assessment of flow and RTD computations in steelmaking tundish system", ISIJ International, 2004, Vol.44(8), pp.1234-1240.

• (64) M. Madan and D.Mazumdar: "A computational assessment of viscosity measurement in rotating viscometer through exact numerical simulation", Materials and Metallurgical Transactions B,Vol.35B(4), 2004, pp.754-758

• (65) M. Madan, D.Satish and Dipak Mazumdar: "Mathematical modelling fluid flow and mixing phenomena in a twin plug stirred ladle", ISIJ International, Vol. 45 , 2005, pp.677-68

• (66) J.Mandal ,D.Mazumdar, M.Madan and S.Patil: Mixing Time and correlation for ladles operated with dual porous plugs , Materials and Metallurgical Transactions B , Vol.36B, 2005, pp.479-487.

• (67) Anil Kumar, D.Mazumdar and S.C .Koria: "Experimental validation of flow and tracer dispersion models in a water model of a four strand billet casting tundish" Materials and Metallurgical Transactions B , Vol.36B, 2005, pp.777-785

• (68) S.Halder and Dipak Mazumdar: "Modelling of time ~temperature evolution during heating of steel ingots and slabs", Trans.I.I.M, Vol.58(5),2005, pp.873-882.

• (69) Nabonita Mazumdar, Arjun Mahadevan , M.Madan and D.Mazumdar: "Impact of ladle design on bath mixing" ISIJ International, Vol. 45, 2005, pp.1941-1944.

• (70) Emila Panda, Dipak Mazumdar and S.P.Mehrotra : "Mathematical modelling of particle segregation during centrifugal casting of metal matrix composites", Materials and Metallurgical Transactions , Vol. 27A, 2006, p.1675

• (71) Sujoy Pandit Patil and Dipak Mazumdar: "Prediction of strand super heat in continuous casting: modelling and industrial scale measurements in in steelmaking tundish systems", Steel Grips, vol.7, 2007, pp.119-126.

• (72) Dipak Mazumdar and J.W.Evans: "Modeling of slag eye formation over a metal bath due to gas injection", Materials and Metallurgical Transactions , Vol.38B, 2007, pp.497-499

• (73) Debasish Chatterjee, Dipak Mazumdar and Sujoy Pandit Patil: "Physical and mathematical modelling of two phase flows in a hollow jet nozzle", Materials and Metallurgical Transactions B , Vol.28B, 2007, pp.819-831.

• (74) Anil Kumar, S.C.Koria and D.Mazumdar: "Basis for systematic analysis of a multi strand tundish", ISIJ International, 2007, Vol.47(11), pp.1618-1624.

• (75) Anil Kumar, D.Mazumdar and S.C.Koria: "Modeling of fluid flow and residence time distribution in a multi strand tundish for inclusion removal", ISIJ International, 2008, Vol.48(1), pp.38-47.

• (76 ) Rajiv Singh, Dipak Mazumdar and A.K.Ray: "Mathematical modeling and validation of wall shear stresses in gas stirred vessels", ISIJ International, Vol. 48(7), 2008, pp.1033-1035.

• (77) D.Mazumdar and R.I.L.Guthrie: "Modeling energy dissipation in slag-covered steel baths in steelmaking ladles", Materials and Metallurgical Transactions B, Vol.41 (5),2010, pp.974-987

• (78) S.P.Patil, D.Satish, M.Peranandhanathan and .D.Mazumdar: "Mixing models for slag covered ladles" ISIJ International, 2010, Vol.50(8),pp.1117-1124.

• (79) M.Peranandhanathan and .D.Mazumdar: "Modeling of slag eye area in argon stirred ladles " ISIJ International, Vol.50 (11), 2010, pp.1622-1631.

• (80) D. Mazumdar, S. Bagui, J. Dutta , S. Ghosh , M.M.Sangamnerker, Anju Shama, SB Sahoo, NP Sinha and SC Srivastava : "Yield improvement at JSPL Raigarh through reduction of tundish skull", Metal News, Indian Institute of Metals, Vol.14(3), 2011, pp.7-12.

• (81) A.Muralikrishna, S.Bagui and Dipak Mazumdar: "Modeling and measurements of intermixing time in a water model of a four strand steelmaking tundish system", Transaction , IIM, Vol.66, No.3, 2013, p.281-295.

• (82) D.Mazumdar: "Tundish Metallurgy: Towards increased productivity and clean steel" , Transactions of IIM, Vol.66, 2013, pp. 597-610.

• (83) Ishant Jain, Ranjeet K Singh, Dipak Mazumdar: "Measurements of some thermal properties of steel refractory systems and heat losses from steelmaking furnaces", Transactions of IIM, Vol.68 (3), 2015, pp.383-392.

• (84) S.Anand , S.K.Rajasekhar, D.Satish, Joy Dutta, D.Satish and Dipak Mazumdar: Metallurgical performance of different slab casting tundish designs: Modeling and industrial scale trials, AIST Transactions, Vol.12, No.4, 2015, pp.329-338.

• (85) Bapin K Rout, O.P. Singh and Dipak Mazumdar: "Swirling flows in side blown reactors and possible advantages", Transactions of IIM, Vol.68 (5), 2015, pp.669-673.

• (86). Soumava Chakraborty and Dipak Mazumdar: "Modeling of heat flow and solidification time in industrial scale, ingot casting operation" Transactions of Indian Institiute of Metals, October 2016, Vol. 69, pp. 1-13.

• (87) Dipak Mazumdar, P. Dhandapani and S. Shravan Kumar : "Modeling and optimisation of argon stirred ladles", ISIJ International, Vol. 57 (2017), No. 2. pp. 286-295.

• (88) Dipak Mazumdar, Soumava Chakraborty, Ankur Agnihotri, S.Bhambure and S.Patil: "Heat flux and temperature measurements during industrial scale ingot casting and their potential applications "AIST Transactions, Vol. 6, 2017, pp. 1-13.

• (89) Prince K Singh and Dipak Mazumdar: A physical model study of to phase gas-liquid flows in ladle shroud ", Materials and Metallurgical Transactions B, Vol. 48, 2018, pp. 1945-1962.

• (90) Dipak Mazumdar,  Prince K Singh and Rohit Tiwari: "Shrouded transfer of molten steel from ladle to tundish: current understanding, mathematical modelling and new insight" , Vol. 58, No. 8, 2018, pp. 1545-1547.

• (91) Krashnavtar and Dipak Mazumdar: " Transient, multiphase simulation of grade intermixing in tundish under constant casting rate and validation against physical modelling " , on line published  9^th July, 2018, Journal of Metals (special issue; Ed. Prof. Kinnor Chattopadhyaya). 

• (92) Rishikesh Mishra and Dipak Mazumdar: " Numerical analysis of turbulence inhibitor performance towards inclusion separation efficiency in a tundish, Transactions of Indian Institute of Metals Vol.72, 2019, pp.889-898.

• (93) Prince K Singh and Dipak Mazumdar: " Mathematical modelling of gas-liquid, two-phase flows in a ladle shroud"  Materials and Metallurgical Transactions B, Vol. 50B, 2019, pp. 1091-1103.

• (94) A.N. Conejo, Rishikesh Mishra and D. Mazumdar: "Effect of nozzle radial position, separation angle and gas flow partitioning on mixing, eye area and wall shear stress in dual plug fitted ladles", Materials and Metallurgical Transactions B (Vol.50 (3), pp. 1490-1502, 2019).

• (95) Rohit Tiwari, Prince K Singh, Ankur Agnihotri and Dipak Mazumdar: " Shrouded transfer of molten steel from a ladle to tundish: thermal modelling and industrial scale measurements" , Submitted to AIST Transactions, Vol.16, No.2, 2019, pp. 1-16.

•  (96) D. Mazumdar, Ankur Agnihotri, Manoj Karnick, Sanjay Mehta, D. Sathish and Siddharth Misra: "Assessment of tundish process performance at industrial scale", Trans, IIM, Vol. 73, 2020, pp. 3079-3093.

•  (97) D. Mazumdar: "Tundish process performance parameters and their direct estimation from a new, plant measurement based formalism", Metallurgical Transactions B, Vol. 52(1), pp. 23-29, 2021.

•  (98) Subham Ranjan, Suvam Mukherjee, Ankur Agnihotri and Dipak Mazumdar: " Physical modelling of nitrogen variation in continuously cast blooms resulting from atmosphereic exposure of steel in tundish during initial stages of teeming", ISIJ International, Vol. 62(3), 2022, pp. 609-612.

•  (99) Zunaid Alam and Dipak Mazumdar: "Fluid flow and mixing phenomena in mechanically agitated and gas stirred ladle syatems and their comparisons" ISIJ International, Vol. 62, 2022, No.1, pp. 112-123.

•  (100) Zunaid Alam, Chandan Kumar, Krashnavtar and Dipak Mazumdar: "Modelling of fluid flow and bulk liquid mixing phenomena in a mechanically agitated ladle", Materials and Metallurgical Transactions, Vol. 53B, 2022, pp. 304-319.

•  (101) Suvam Mukherjee and Dipak Mazumdar: "Physical and mathematical modelling of argon flow and distribution around a ladle shroud-collector nozzle (LS-CN) assembly", Materials and Metallurgical Transactions B, 2022, Vol. 53B, pp. 2600-2617.

•  (102) Suvam Mukherjee and Dipak Mazumdar: "A new inert gas delivery design for improved shielding of ladle shroud-collector nozzle (LS-CN) assembly: Modelling, design and industrial-scale validations", Steel research International 2022, pp. 1-17.

•  (103) Subham Ranjan, Suvam Mukherjee and Dipak Mazumdar: "Mathematical and physical modelling of prior inertization and control of tundish atmosphere during continuous casting of steel", Trans. IIM, (in press September 2022).

•  (104) Suvam Mukherjee and Dipak Mazumdar: "Air ingression in ladle shrouds, tundish open eye formation, thier inter-dependence and correlations: a physical model investigation" Materials and Metallurgical Transactions B (in press August 2022).

•  (105) Krashnavtar, Dipak Mazumdar and Ankur Agnihotri: "Considerations concerning numerical modelling of flow and heat transfer phenomena in continuous casting of steel", ISIJ International, Vol. 63, 2023, No. 3, pp. 596-600.

•  (106) Krashnavtar and Dipak Mazumdar: "An assessment of physical and mathematical modelling approaches in the study of flow and solidification  phenomena in continuous casting of steel", Trans. IIM, 2022.

•  (107) Rishikesh Mishra and Dipak Mazumdar: "Critical considerations for numerical simulation of multiphase fluid dynamics in gas stirred vessels, Trans. IIM, 2023.

Technical Articles in Conference Proceedings

•  (1) Dipak Mazumdar and R.I.L.Guthrie: Alloying in ladles with C.A.S, Proc., 5th International Iron and Steel Congress (Washington D.C.),1986,pp.1147-1157.

•  (2) Dipak Mazumdar: Dynamics of slag metal interactions in gas stirred ladle systems, Proc., Symposium on Kinetics of Metallurgical Processes ( Kharagpur), 1987, pp.45-59.

•  (3) Dipak Mazumdar and R.I.L.Guthrie: Scaling equations for gas stirred ladle systems, Proc., 6th Iron and Steel Congress (Nagoya), Vol.1, 1990, pp.460-468.

•  (4) Dipak Mazumdar and S.K.Choudhary: On the applicability of the effective thermal conductivity concept to the mathematical modelling of continuous casting of steel,Proc. International Conference on Chemical Metallurgy (Bombay),1991, pp.381-401.

•  (5) Dipak Mazumdar: Mathematical modelling of ferro-alloy dissolution in argon stirred ladles, Proc.,2nd International Symposium on Modelling of Iron and Steelmaking processes (10th PTD conference, Toronto), Vol.10, 1992, pp.151-159.

•  (6) Dipak Mazumdar and R.I.L.Guthrie: Numerical simulation of turbulent fluid flow in gas stirred metallurgical reactors, Proc., 2nd International Symposium on Computer software in Chemical and Extractive Metallurgy (C.I.M. 93, Quebec City), 1993, pp.183-192.

•  (7) Dipak Mazumdar: Modelling of mass transfer rates between solid and liquid in gas stirred ladle systems, Proc. of a workshop on Transport Phenomena in Metallurgical Processing, National Metallurgical Laboratory, Jamshedpur, 1996,pp.75-88.

•  (8) Manish Gupta and Dipak Mazumdar: Modelling of mixing phenomena in axisymmetric gas stirred ladle systems, Proc. International Conference on"Recent advances in Metallurgical processes",Indian Institute of Science, Bangalore( India),1997, pp.421-426.

•  (9) Daniel Sunder, Dipak Mazumdar and V.S.S.R. Murthy: Mathematical Modelling of Infiltration Phenomena in ceramic preforms, Proc. International Conference on "Recent advances in Metallurgical processes", Indian Institute of Science, Bangalore ( India),1997, pp.403-408.

•  (10) Chaitanya Bhanu, Ashish Roberts and Dipak Mazumdar: " Hydrodynamic modelling of metallurgical tundish systems", Proc. of the International Conference QUACON'97, Ranchi (India), 1997,pp.165-172.

•  (11) Ashish Robert and Dipak Mazumdar: "A computational and experimental study of Residence Time Distributions (RTD) in different tundish designs", Proc.,Steelmaking Conference, ISS, 2000,pp.291-299 (certificate of appreciation  for best presentation, 2000 Steelmaking Conderence, Iron & Steel Society, Warrendale, USA).

•  (12) Dipak Mazumdar: "Some fundamental considerations concerning gas injection operations in steelmaking ladles" Proc., 2000 Ironmaking conference ( PTD section), ISS, , pp.531-540.

•  (13) D.Mazumdar: Physical and mathematical modelling in steelmaking, Proc. "National Workshop on ladle-tundish-mold operations: Principles and practices", IIT, Kanpur, Jan, 2003, pp. 110-125.

•  (14) A.Kumar , S.C.Koria and D.Mazumdar: An experimental and computational study of flow and Residence Time Distributions (RTD) in a tundish,  Proc. Asia steel 2003  conference, Vol.2, 2003, pp.1.5.1-1.5.6.

•  (15) J.Mandal, G.K.Gupta, A.Tamrakar and D.Mazumdar: An experimental and computational and computational study of mixing times in ladles stirred with dual porous plugs, Proc. Asia steel 2003 International conference, Jamshedpur, 2003, pp.2.d.6.1-2.d.6.6.

•  (16) D.Mazumdar, C.seybert, D.Steigart and J.W.Evans: Transient flow phenomena in steelmaking ladles: A computational and experimental study, Proc. Asia steel 2003 International conference, Vol. 2,2003, pp.d.7.1-2.d.7.7.

•  (17) D.Mazumdar: " Sharing our experiences with Fluent: Modelling of some fundamental and applied problems in steelmaking ", Procd. of the Ist South East Asia USG Meeting (Fluent), 2003, pp.1-8.

•  (18) D. Mazumdar and D. Satish Kumar: " Mixing times and correlation for dual plug stirred ladle: Quantifying the role of an upper buoyant phase" ,Procd. Oxygen Steelmaking (Metsoc, CIM), 2004, pp.311-323 , Hamilton, Canada.

•  (19) D. Mazumdar: Transport phenomena  in Ladle Metallurgy, Annals of Indian National Academy of Engineering, Vol.1, No.1, 2004, pp.127-133.

•  (20) Sujay P.Patil, D.Chatterjee and Dipak Mazumdar: " Prediction and control of superheat during continuous casting of Steel" ,Procd. Internation conference on past, present and future of continuous casting of steel, Jamshedpur, 2005, pp.7-14.

•  (21) D.Chatterjee and Dipak Mazumdar: "Physical and mathematical modelling of two phase flows in a hollow jet nozzle" ( Procd. ICAMMP-2006,Kharagpur(India), pp.671-681.

•  (22) S. Eck, A. Ludwig, D. Mazumdar and J. W. Evans: "Experimental and numerical modelling of Cu~Sn casting with  adjustable solidification front " Proceedings, SMP-2007, Sheffield (UK)(CD Rom Version)

•  (23) Dipak Mazumdar: Modeling Energy Dissipation in Argon stirred ladles, in Procd. Advances in the Theory of Iron and Steelmaking (ATIS), Bangalore. India, 2009, pp.374-381. 

•  (24) W. Zhongshua, AS Mujumdar and D.Mazumdar: Exploration of some new tundish designs via simulation, Procd., Advances in the theory of Ironmaking and Steelmaking (ATIS), Banglore, 2009,pp.402-409.

•  (25) Dipak Mazumdar: Physical modeling of slab caster tundish to improve yield and quality of steel; Jim Evans Honorary Symposium,TMS2010, Seattle, pp. 191-197.

•  (26) Dipak Mazumdar: Modeling and optimization of steel processing in EOF, ladle and tundish: An overview of collaborative research at IIT Kanpur, Guthrie Honorary symposium, Montreal, Canada, 2011, pp.369-375. (Keynote Paper).

•  (27) Anurag Nandwana and Dipak Mazumdar: Modeling and high temperature studies of continous casting of wider section (1500~2500mm) steel slabs, ATCOM 2011, Ranchi,India,Procd. CD-ROM,MS/KP/1.

•  (28) Dipak Mazumdar: Academia, research and industry synergy: An overview of decade long steel industry funded research at IIT Kanpur ,ICAMMP2011, Procd., CD ROM, IP(3):1-8.

•  (29) Dipak Mazumdar: The role of modeling in steelmaking, Procd., IREFCON12, Kolkata, pp.76-82.

•  (30) Diapk Mazumdar: Some considerations concerning thermal modeling during deformation and heat treatment processes, Procd., RAFTS-2012 (CD ROM version) Ranchi.

•  (31) Dipak Mazumdar: Tundish Metallurgy: towards better productivity and clean steel, Procd. International symposium on challenges in steelmaking,Jameshdpur, 2012 (Trans. IIM special issue, 2013, pp. 169-177), (Keynote Paper).

•  (32) Dipak Mazumdar: Modeling of steelmaking proceses: Efforts at IIT Kanpur, Procd. SIMPRO-2012,Ranchi ,pp.461- 472.

•  (33) Dipak Mazumdar: Metallurgical performance of slab casting tundish: Towards a generic tundish design, Procd., Advances in refractories and clean steel, ARCS2013, Ranchi (CD ROM version).

•  (34) Dipak Mazumdar: Tundish process performance improvement: Some Indian case studies, Ralph Llyod Harris Memorial Symposium, M&MT2013, Montreal (CD ROM version).

•  (35) Dipak Mazumdar: Ladle metallurgy Steelmaking: The role of physical and mathematical modeling, Procd. Science and Technology of Iron and Steel, STIS13 (CD ROM version).Jamshedpur, 2013. (Keynote Paper).

•  (36) Ankit Karwa, Madhusudan Sharma and Dipak Mazumdar: Physical and mathematical modeling of grade intermixing phenomena in a single strand casting tundish, IREFCON, Kolkata, pp. 195-200, 2014.

• .(37) Dipak Mazumdar, OP Singh  and Sanjay Mehta : Steelmaking: Theory , practice and plant performance, ICS-2015, Beijing,(Keynote Paper); pp.39-43.

•  (38)Soumava Chakraborty, Dipak Mazumdar, Sachin Bhambure and Sanjay Patil: "An experimental and computational analysis of casting of large round steel ingots", Asia Steel 2015, Yokohoma , Japan (Keynote Paper),pp.244-245.

•  (39) Dipak Mazumdar: "The Indian Iron and Steelmaking Scenario: A perspective on Future, Technical manpower and R&D", Procd. IREFCON-2016, Hyderabad, pp.43-48.

• .(40) Dipak Mazumdar: "The role of CFD in steelmaking: single and multi-phase modeling of argon-steel-slag interactions in ladle metallurgy and casting processes", Procd., SIMPRO-2016 (Simulation of Metallurgical Processes), CD ROM version, 2016.

•  (41) Prince K. Singh, Subham Ranjan and Dipak Mazumdar: "Gas-liquid flows in ladle shroud and their impact on tundish process performance and steel quality", Procd. Advances in High Strength Steel (AHSS 2017), Jamshedpur, CD rom version.

•  (42) Dipak Mazumdar: "Direct measurements of thermal contact resistance during industrial scale, ingot casting operation", Procd. STEELSIM2017 Conference, Qingdao, China, CD rom version.

•  (43) Krashnavtar and D. Mazumdar: Transient, two phase simulation of grade intermixing phenomena under constant throughput condition, Procd., 3rd International Confernece on Science and Technology of Ironmaking and Steelmaking (STIS-2017), 2017, IIT, Kanpur, pp. 431-434.

•  (44) Rishikesh Mishra and  Dipak Mazumdar: "Mathematical modeling of teeming of steelmaking ladles", Procd., 3^rd International Conference on Science and Technology of iron making and steelmaking (STIS-2017), 2017, IIT, Kanpur, pp. 423-426.

•  (45) Rohan Sharma and Dipak Mazumdar: "The role of pre-existing flows on the onset of slag vortices during emptying of a tundish: a numerical investigation", Procd. 3^rd International Conference on Science and Technology of Ironmaking and Steelmaking (STIS-2017), 2017, IIT, Kanpur, pp. 371-374.

•  (46) Prince Kr. Singh and Dipak Mazumdar: "Macroscopic modelling of argon-steel flows inside a ladle shroud", Procd., 3^rd International Conference on Science and Technology of Ironmaking and Steelmaking (STIS-2017), 2017, IIT, Kanpur, pp. 399-402.

•  (47) Zunaid Alam, Krashnavtar and Dipak Mazumdar: "Modelling of mechanical agitation and throughput control in steelmaking transfer vessels: numerical simulation and experimental validation" Procd., CD-rom version, ICS2018, Venice, Italy.

•  (48) Prince K Singh, Rohit Tiwari, Dipak Mazumdar and Abhishek Dutta "Modelling of two phase, gas-liquid flows in ladle shrouds", Procd. CD-rom version, ICS2018, Venice Italy.

• (49)Dipak Mazumdar and Rishikesh Mishra: "Improvement of steel cleanliness in tundish operations: physical modeling, CFD and industrial scale validation", Procd., Cleansteel10, (CD-rom version), Budapest, Hungary, 2018.

• (50) Dipak Mazumdar, Prince Kumar Singh, Rishikesh Mishra and Krashnavtar: "Simulation of steelmaking processes: an assessment of reduced and full scale water modelling, numerical simulation vis a vis plant scale measurements" Procd., STEELSIM2019 (AIST) , Toronto, Canada, Aug. 13-15^th, 2019 (pp.769-779).

• (51) Rishikesh Mishra and Dipak Mazumdar: "An assessment of numerical approaches towards multiphase hydrodynamic modeling of inert gas stirred ladle systems" STEELSIM2019 (AIST) , Toronto, Canada, Aug. 13-15^th, 2019 (pp.758-768).

•  (52) Sayantan Chakraborty and Dipak Mazumdar: "The role of an upper slag phase and thermal in homogeneity in melt on grade intermixin in a tundish at constant throughput  rate" 178th ISIJ meeting (Contribution of Stelmaking technology for the sustainable development in Asia). Okayama City (Japan), CAMP, ISIJ, Vol. 32, 2019, pp. 482-485.

•  (53) Suvam Mukherjee and Dipak Mazumdar: "Ladle shroud performance enhancement: a process modeling investigation", Proceeding (CD ROM), Steel SIM2021, Vienna (Austria).

•  (54) Dipak Mazumdar and Ankur Agnihotri: "Measurement based criteria for direct evaluation of tundish process performance at industrial scale", Proceeding, (CD ROM), Asia Steel, 2021, South Korea.

•  (55) Dipak Mazumdar, Ankur Agnihotri and Rishikesh Mishra: "On the inference of inclusion floatation efficiency in steelmaking tundish system for RTD measurements", Proceeding 8th ICS (AIST), Montreal, 2022.

•  (56) R. Mishra and D. Mazumdar: "Insights of multiphase treatment towards modeling the fluid dynamics of gas-stirred baths", Procd. 4th International Conference in Science and Technology of Ironmaking and Steelmaking , 2022, pp. 400-403.