|
|
|
|
Publications |
|
|
|
1. P.Assis, B.Deo, D.Mazumdar and N.Chakraborty: Modelling and Simulation of Iron and
Steelmaking, Revista Escola
de Minas, 2. D.Mazumdar and J.W.Evans: Modeling of Steelmaking Processes, CRC Press, Boca Ranton, Florida,USA ( 2008) 3. D.Mazumdar: A first course in Iron and Steelmaking, University Press ( Hyderabad), India(2008). Book Chapters 1.Dipak Mazumdar: Modelling of secondary steel making processes, in " Secondary steelmaking " by A.Ghosh, CRC Press ,2000, pp.199-217. Invited Review Articles 1.Dipak Mazumdar and R.I.L.Guthrie: The physical and mathematical modelling of gas stirred ladle systems, ISIJ International, Vol.35(1),1995,pp.1-20. 2. Dipak Mazumdar and Roderick I.L.Guthrie: The physical and mathematical modelling of continuous casting tundish systems , ISIJ International, Vol. 39(6), 1999, pp.525-548. 3.D.Mazumdar and J.W.Evans: Macroscopic models for gas stirred ladles: a Review ISIJ International , pp.447-461, 2004 4.D.Mazumdar: The role of modelling in steelmaking Metal News , Indian Institute of Metals, Vol.1&2, pp.16-20 and 5-11, 2004 |
|
|
|
1.Dipak Mazumdar and R.I.L.Guthrie: Alloying in
ladles with C.A.S, Proc., 5th International Iron and Steel Congress ( 2.Dipak Mazumdar: Dynamics of slag metal interactions in gas stirred ladle systems, Proc., Symposium on Kinetics of Metallurgical Processes ( Kharagpur), 1987, pp.45-59. 3.Dipak Mazumdar and R.I.L.Guthrie: Scaling equations for gas stirred ladle systems, Proc., 6th Iron and Steel Congress (Nagoya), Vol.1, 1990, pp.460-468. 4.Dipak Mazumdar and S.K.Choudhary: On the
applicability of the effective thermal conductivity concept to the
mathematical modelling of continuous casting of
steel, Proc. International Conference on Chemical Metallurgy ( 5.Dipak Mazumdar: Mathematical modelling of ferro-alloy dissolution in argon stirred ladles, Proc.,2nd International Symposium on Modelling of Iron and Steelmaking processes (10th PTD conference, Toronto), Vol.10, 1992, pp.151-159. 6.Dipak Mazumdar and R.I.L.Guthrie: Numerical simulation of turbulent fluid flow in gas stirred metallurgical reactors, Proc., 2nd International Symposium on Computer software in Chemical and Extractive Metallurgy (C.I.M. 93, Quebec City), 1993, pp.183-192. 7. Dipak Mazumdar: Modelling
of mass transfer rates between solid and liquid in gas stirred ladle systems,
Procd. of a workshop on Transport Phenomena in
Metallurgical Processing, National Metallurgical Laboratory, 8.Manish Gupta and Dipak Mazumdar: Modelling of mixing phenomena in axisymmetric gas stirred ladle systems, Proc. International Conference on " Recent advances in Metallurgical processes", Indian Institute of Science, Bangalore( India),1997, pp.421-426. 9. Daniel Sunder, Dipak Mazumdar and V.S.S.R. Murthy: Mathematical Modelling of Infiltration Phenomena in ceramic preforms, Proc. International Conference on " Recent advances in Metallurgical processes", Indian Institute of Science, Bangalore ( India),1997, pp.403-408. 10.Chaitanya Bhanu, Ashish
Roberts and Dipak Mazumdar: " Hydrodynamic modelling of metallurgical tundish systems", Proc.
of the International Conference QUACON'97, 11. Dipak Mazumdar: "Some fundamental considerations concerning gas injection operations in steelmaking ladles" Proc., 2000 Ironmaking conference ( PTD section), ISS, , pp.531-540. 12. Ashish Robert and Dipak Mazumdar: "A computational and experimental study of Residence Time Distributions (RTD) in different tundish designs", Proc. , Steelmaking Conference, ISS, 2000, pp.291-299 (certificate of appreciation for best presentation, 2000 Steelmaking Conderence, Iron & Steel Society, Warrendale, USA). 13.D.Mazumdar, C.seybert, D.Steigardt
and J.W.Evans: Transient flow phenomena in
steelmaking ladles: A computational and experimental study, Proc. Asia steel
2003 International conference, 14.A.Kumar , S.C.Koria and D.Mazumdar: An experimental and computational study of flow and Residence Time Distributions (RTD) in a tundish, Proc. Asia steel 2003 International conference, Jamshedpur, 2003, pp.2.I.5.1-2.I.5.6 15.J.Mandal, G.K.Gupta, A.Tamrakar and D.Mazumdar: An experimental and computational and computational study of mixing times in ladles stirred with dual porous plugs, Proc. Asia steel 2003 International conference, Jamshedpur, 2003, pp.2.d.6.1-2.d.6.6. 16.Dipak Mazumdar: "Physical and mathematical modelling
in steelmaking", Proc. National workshop on Ladle-Tundish Mold
Operations: principles, 17. D.Mazumdar:
“Sharing our experiences with Fluent: Modelling of some fundamental and
applied problems in steelmaking”, Procd. of
the Fluent CFD conference, TP-02 ( CD
Rom version), 2003, pp.1-8. 18.
D.Mazumdar and D.Satish
Kumar: “Mixing times and correlation for dual plug stirred ladle:
Quantifying the role of an upper buoyant phase”, Procd.
Oxygen Steelmaking (Metsoc, CIM), 2004, pp.311-323
, 19.D. Mazumdar: Transport phenomena in Ladle Metallurgy, Annals of Indian National Academy of Engineering, Vol.1, No.1, 2004, pp.127-133. 20. Sujay P.Patil, D.Chatterjee and Dipak Mazumdar: “ Prediction
and control of superheat during continuous casting of Steel” , Procd. Internation conference on past, present and future
of continuous casting of steel, 21. D.Chatterjee
and Dipak Mazumdar: “Physical and mathematical modelling of two phase flows in a
hollow jet nozzle” ( Procd.
ICAMMP-2006,Kharagpur( 22. S. Eck, A. Ludwig, D. Mazumdar and J. W.
Evans: “Experimental and
numerical modelling of Cu~Sn casting with
adjustable solidification front” Proceedings,
SMP-2007, Sheffield (UK)(CD Rom Version) |
|
|
|
1. Dipak Mazumdar and Ahindra Ghosh: Production of semi-killed steel with optimum porosity, Part II: Experimental measurements, Trans.I.I.M., Vol.38(1),pp.55-63. 2.Dipak Mazumdar and R.I.L.Guthrie: Hydrodynamic modelling of some gas injection operations in ladle metallurgy operations, Metall.Trans., Vol.16B,1985,pp.83-90. 3.Dipak Mazumdar and R.I.L.Guthrie: The hydrodynamics of the C.A.S.method of alloy addition, Ironmaking and Steelmaking, Vol.12(6),1985,pp.256-264. 4.Dipak Mazumdar and R.I.L.Guthrie: Numerical computation of flow and mixing in ladle metallurgy steelmaking operations (the C.A.S.method), Applied Mathematical Modelling, Vol.10(1),1986,pp.25-32. 5.Dipak Mazumdar and R.I.L.Guthrie: On the reduction in steady translational drag forces in bubbly Newtonian liquid, Chemical Engineering Science, Vol.41(11), 1986,pp.2965-2967. 6.Dipak Mazumdar and R.I.L.Guthrie: Mixing models for gas stirred ladle systems, Metall.Trans., Vol.17B, 1986,pp.725-733. 7.H.Nakajima, Dipak Mazumdar and R.I.L.Guthrie: Effect of overlying slag phase liquids on the hydrodynamics of gas stirred ladle systems,Tetsu-to-hagane, 1987, pp.S949. 8.Dipak Mazumdar and R.I.L.Guthrie: An analysis of numerical methods for solving the particle trajectory equation, Applied Mathematical Modelling, 1988, pp.398-401. 9.Dipak Mazumdar, H.Nakajima and R.I.L.Guthrie: Possible roles of upper slag phases on the fluid dynamics of gas stirred ladles, Metall.Trans., Vol.19B, 1988,pp.705-708. 10.Dipak Mazumdar and Ravi Verma: A predictive mathematical model for analysis of continuous casting of steel, Trans.I.I.M., Vol.42(5),1989, pp.447-459 (Trans. IIM Best paper award, Kamani Gold medal 1989). 11. Dipak Mazumdar: A consideration about the concept of effective thermal conductivity in continuous casting, ISIJ International, Vol.29(6), 1989, pp.524-528. 12. Dipak Mazumdar: On effective viscosity models for gas stirred ladle systems, Metall.Trans, Vol.20B,1989, pp.967-969. 13. Dipak Mazumdar: Dynamic similarity considerations in gas stirred ladle systems, Metall.Trans., Vol. 21B,1990,pp.925-928. 14.Dipak Mazumdar and R.I.L.Guthrie: Hydrodynamic modelling of slag - metal interactions in gas stirred ladle systems,Trans.I.I.M, Vol.43(3), 1990, pp.139-148. 15.Dipak Mazumdar, S.K.Kajani and A.Ghosh: Mass transfer between solid and liquid in vessels agitated by bubble plume, Steel Research, Vol.61(8), 1990, pp.339-346. 16.Dipak Mazumdar and S.Ramani: Computation of transient diffusion phenomena via FORTRAN library routines, Trans. I.I.M., Vol.43(3), 1990, pp.183-186. 17. Dipak Mazumdar and R.I.L.Guthrie: Hydrodynamic modelling of gas stirred ladle systems, Trans.I.I.M., Vol.44(6), 1991,pp.139-149. 18.D.Balaji and Dipak Mazumdar: Numerical computation of flow phenomena in gas stirred ladle systems, Steel Research, Vol.62(1),1991, pp.16-23. 19.A.K.Singh and Dipak Mazumdar: Comparison of several numerical prediction methods for thermal fields during phase transformation of plain carbon steel, ISIJ International, Vol.3(12), 1991, pp.1441-1445. 20.Dipak Mazumdar, Neeraj Kumar and Vinaya Verma: Heat and mass transfer rates between solid and liquid in gas stirred ladle systems, Ironmaking and Steelmaking, Vol.19,1992, pp.152-155. 21.A.K.Singh and Dipak Mazumdar: Mathematical modelling of thermal fields during heat treatment of steel, Steel Research, Vol.63(5), 1992, pp.194-200. 22.Dipak Mazumdar, Tanuj Narayan and Paramjit Bansal: Mathematical modelling of mass transfer rates between solid and liquid in high temperature gas stirred melts, Applied Mathematical Modeling, Vol.16(5),1992, pp.255-262. 23.D.Balaji and Dipak Mazumdar: Mathematical modelling of flows induced by co-axial submerged and impinging gas jet systems, Trans.I.I.M., Vol.45(1),1992, pp.25-32. 24.Amit Bhattacharjee and Dipak Mazumdar: Mathematical modelling of fluid flow, alloy dissolution and mixing in industrial argon stirred ladles, Trans.I.I.M., Vol.45(3), 1992, pp.153-161. 25.G.G.Roy, V.Singh and Dipak Mazumdar: Mathematical modelling of fluid flow in filling ladles, Trans.I.I.M., Vol.45(3), 1992, pp.147-152. 26.Dipak Mazumdar, R.I.L.Guthrie and Y.Sahai: On mathematical models and numerical solutions of gas stirred ladle systems, Applied Mathematical Modelling, Vol.17(5), 1993, pp. 255-262. 27.M.Tanaka, Dipak Mazumdar and R.I.L.Guthrie: Motions of alloying additions during furnace tapping in steelmaking processing operations, Metall.Trans., Vol.24B, 1993, pp.639-648. 28.Dipak Mazumdar and R.I.L.Guthrie: Motions of alloying additions in the C.A.S Steelmaking operations, Metall.Trans., Vol.24B, 1993, pp.649-655. 29.Dipak Mazumdar and R.I.L.Guthrie: Considerations concerning the numerical computation of mixing times in steelmaking ladles, ISIJ International, Vol.33(4), 1993, pp.513-516. 30.Dipak Mazumdar and R.I.L.Guthrie: On the numerical calculation and non-dimensional representation of velocity fields in bubble stirred ladle systems, Steel Research, Vol.64(6), 1993, pp.286-291. 31.S.K.Choudhary, Dipak Mazumdar and A.Ghosh: Mathematical modelling of heat transfer phenomena in continuous casting of steel, ISIJ International, Vol.33(7),1993, pp.764-774. 32.Dipak Mazumdar: On the mathematical approximation of infinitely long cylinders in rate phenomena, Trans.I.I.M , Vol.46(6),1993,pp.387-390. 33.Dipak Mazumdar: An improved quasi single phase calculation procedure for hydrodynamic modelling of gas stirred ladle system, Trans.I.I.M.,Vol.46(6),1993,pp.353.362. 34.Dipak Mazumdar and R.I.L.Guthrie: A comparison of three mathematical modelling procedures for simulation of fluid flow phenomena in bubble stirred ladle systems, Metall.Trans., Vol.25B, 1994, pp.308-312. 35.Dipak Mazumdar and R.I.L.Guthrie: An assessment of a two phase calculation procedure for hydrodynamic modelling of submerged gas injection in ladles,ISIJ International, Vol.34(5), 1994,pp.384-392. 36.S.K.Choudhary and Dipak Mazumdar: Mathematical modelling of transport phenomena in continuous casting of steel, ISIJ International, Vol.34(7), 1994, pp.584-592. 37.Dipak Mazumdar and R.I.L.Guthrie: A note on the determination of mixing times in gas stirred ladle systems, ISIJ International, Vol.35(2),1995,pp.220-222. 38.S.K.Choudhary and Dipak Mazumdar: Mathematical modelling of fluid flow, heat transfer and solidification phenomena in continuous casting of steel, Steel Research, Vol.66(5),1995, pp.199-205. 39.Dipak Mazumdar, Guler Yamanoglu, Ramani Sankarnarayanan and Roderick.I.L.Guthrie: Similarity considerations in the physical modelling of steelmaking tundish systems, Steel Research, Vol.66(1),1995,pp.14-19. 40.Dipak Mazumdar and R.I.L.Guthrie: On the numerical computation of turbulent fluid flow in C.A.S. steelmaking operations, Applied mathematical Modelling, Vol.19(9),1995,pp.519-524. 41.Dipak Mazumdar: A correlation for the estimation of mass transfer rates from solids in gas stirred ladles Steel Research,Vol.67(7),1996,pp.263-267. 42.V.Sudhakar and D.Mazumdar: A unified representation of two phase plume characteristics in gas stirred ladle systems , Materials and Metallurgical Transactions, Vol.27B,1996,pp.704-708. 43. Dipak Mazumdar, Santanu Das and Sudhendu Bajpayee: Mixing time correlation for gas stirred ladle systems , ISIJ International, Vol.37(2), 1997, pp.194-196. 44.A.K.Singh and D.Mazumdar: Mass transfer between solid and liquid in gas stirred ladle systems , Materials and Metallurgical Transactions,27B,1997,pp.95-102 45. Himansu Singh and Dipak Mazumdar: On the modelling of flow phenomena in air agitated Pachuka tank, Materials and Metallurgical Transactions, Volume 28B,1997, pp.727-731. 46. Dipak Mazumdar, Guller Yamanoglu and Roderick.I.L. Guthrie: Hydrodynamic performance of Metallurgical tundish systems: A comparative study of three different tundish designs , Steel Research, Vol.68(7), 1997, pp.293-300. 47. Chaitanya Bhanu and Dipak Mazumdar: Numerical prediction of melting rates in gas bubble driven systems , Trans. I.I.M., Vol.50, 1997, pp.249-258. 48.Kamalesh Mandal and Dipak Mazumdar: Dimensional analysis and mixing phenomena in bubble stirred ladles, ISIJ International , Vol.38(10),1998, pp.1150-1152 49. G.Yamanoglu, R.I.L.Guthrie and Dipak Mazumdar: Study of powder injection into water using an on line particle detection system, Canadian Metallurgical Quarterly, Vol.38, No.1, 1999, pp.61-80. 50. Dipak Mazumdar and R.I.L.Guthrie: “Mixing time and fluid flow phenomena in liquids of varying kinematic viscosities agitated by bottom gas injection", Metallurgical and Materials Transactions, Vol.30B, 1999, pp.349-351. 51.Dipak Mazumdar and R.I.L.Guthrie: " Decay of fluid motion in a filling ladle after tapping", Metallurgical and Materials Transactions, Vol.30B, 1999, pp.628-629. 52. Chenguo Tian, Dipak Mazumdar and R.I.L.Guthrie: Analyses of the dynamic processes of liquid metal filtration, Metallurgical and Materials transactions, Vol.30B, 1999, pp.891-890. 53.Dipak Mazumdar and R.I.L.Guthrie: Mixing time and correlations for gas stirred ladle systems, ISS Transactions,Vol.9,1999,pp.89-96. 54. Chaitanya Bhanu and Dipak Mazumdar: On the prediction of melting rates in gas bubble driven systems , Trans. I.I.M., Vol.52,1999,pp.159-163. 55. Daniel Sunder, Dipak Mazumdar and V.S.S.R. Murthy: Modelling of composite growth in directed melt nitridation processes, Materials and Metallurgical Transactions A, Vol.30A, 1999, pp.2951-2958.. 56. Dipak Mazumdar: "On the estimation of heat transfer coefficients in metallic melts", Transactions of the Indian Institute of Metals ", Vol.52,1999, pp.403-411. 57. Dipak Mazumdar: " Some fundamental considerations concerning gas injection operations in stelmaking ladles", Transactions of the Indian Institute of Metals, Vol.53,2000, pp.49-61 (SAIL Gold Medal 2001). 58. Dipak Mazumdar, H.B.Kim and R.I.L.Guthrie: " Modelling criteria for flow simulation in gas stirred ladle systems: An experimental study" , Ironmaking Steelmaking, Vol.27(4), 2000, pp. 302-309. 59. S.A.Argyropoulos, A.C.Mikrovas and D.Mazumdar: A Dimensionless correlations for forced convection in liquid metals , PartII : Two phase flows, Metallugical and Materials Transactions, 32B,2001, pp.247-252. 60. Ashish Robert and Dipak Mazumdar: A Physical and Mathematical modelling of Flow and Residence Time Distributions (RTD) in Different Tundish Design, Steel Research, Vol.72(3), 2001, pp.97-105. 61. Kamalesh Mandal and Dipak Mazumdar: The role of vessel aspect ratio on the fluid flow and mixing phenomena in CAS steelmaking operation: A physical & mathematical modelling investigation, Trans. I.I.M, Vol.54(3),2001,pp.105-115 62. D. Mazumdar, R. Yadav and B.B. Mahato: Transient Flow and Mixing in steelmaking ladles during the initial period of gas stirring, ISIJ International Vol.42(1),2002,pp.106-108. 63.D.Mazumdar: On the estimation of plume rise velocity in gas stirred ladles, Materials and Metallurgical Transactions, Vol.33B,2002,pp.937-941. 64.D.Mazumdar, K.K.Singh and A,Ghosh: Measurement and computation of drag forces in thermo- gravimetric studies,Materials and Metallurgical Transactions, Vol.33B,2002,pp.891-896 65.D.Mazumdar, D.Steingardt,C.Seybert and J.W.Evans: Transient flow in ladles during initial and post gas injection periods, ISIJ INternational, Vol.43, 2003,pp132-134 66.P.Mitra, D.Mazumdar, A.Tamrakar, G.K.Gupta and J.Mandal: Development of a three dimensional turbulent flow calculation procedure and its application to ladles stirred with dual porous plugs, Trans. IIM, Vol.56(2), 2003, pp95-107. 67. D.Mazumdar, and J.W.Evans:
“Some considerations concerning empirical correlations for plume
(spout) eye area in slag covered metallic melts”, ISIJ International,
Vol.43, 2003, pp.2076-2078. 68. D.Mazumdar, and
J.W.Evans: “Macroscopic models for gas
stirred ladles: a review”,ISIJ
International , pp.447-461, 2004
69.D.Mazumdar: “The role of modelling
in steelmaking”, Metal News , Indian Institute of Metals, Vol.1&2,
2004, pp.16-20 and 5-11. 70. D.Mazumdar, and
J.W.Evans: “ A model for estimating exposed
plume eye area in steel refining ladles covered with thin slag”
Materials and Metalllurgical Transactions, Vol.35B,
2004, pp.400-404 71. Anil Kumar, S.C.Koria and D.Mazumdar:
“An assessment of flow and RTD
computations in steelmaking tundish system”,ISIJ International, Vol.44(8),
pp.1234-1240.
72. M.Madan and D.Mazumdar: “A computational assessment of
viscosity measurement in rotating viscometer through exact numerical
simulation”, Materials and Metallurgical Transactions B,Vol.35B(4),
2004, pp.754-758 73. M.Madan,D.Satish
and Dipak Mazumdar: “ Mathematical
modelling fluid flow and mixing phenomena in a twin plug stirred ladle”,
ISIJ International, Vol. 45, 2005,
pp.677-685
74. J.Mandal
,D.Mazumdar, M.Madan and S.Patil: Mixing
Time and correlation for ladles
operated with dual porous plugs , Materials and Metallurgical
Transactions B , Vol.36B, 2005, pp.479-487.
75. Anil Kumar, D.Mazumdar and S.C .Koria: “Experimental validation of flow and
tracer dispersion models in a water model of a four strand billet casting tundish”
Materials and Metallurgical Transactions B , Vol.36B, 2005, pp.777-785.
76. S.Halder
and Dipak Mazumdar: “Modelling of time ~temperature evolution during heating of
steel ingots and slabs”, Transactions of the Indian
78.Emila Panda, Dipak Mazumdar and S.P.Mehrotra : “ Mathematical modelling of particle segregation during centrifugal casting of metal matrix composites”, Materials and Metallurgical Transactions , Vol. 27A, 2006, p.1675 79. Sujoy Pandit Patil and Dipak Mazumdar: “Prediction of strand super heat in continuous casting: modelling and industrial scale measurements in in steelmaking tundish systems”, Steel Grips, Vol.6, 2006, p.45 80. Dipak Mazumdar and J.W.Evans: “Modeling of slag eye formation over a metal bath due to gas injection”, Materials and Metallurgical Transactions , Vol.38B, 2007, pp.497-499 81. Debasish Chatterjee, Dipak Mazumdar and Sujoy Pandit Patil: “Physical and mathematical modelling of two phase flows in an hollow jet nozzle”, Materials and Metallurgical Transactions B , Vol.28B, 2007, pp.819-831. 82. Anil Kumar, S.C.Koria and D.Mazumdar: “basis for systematic analysis of a multi strand tundish”, ISIJ International, 2007, Vol.47(11), pp.1618-1624. 83. Anil Kumar, D.Mazumdar and S.C.Koria: “Modeling of fluid flow and residence time distribution in a multi strand tundish for inclusion removal”, ISIJ International, 2008, Vol.48(1), pp.38-47. 84. Rajiv Singh, Dipak Mazumdar and A.K.Ray: “Mathematical modeling and validation of wall shear stresses in gas stirred vessels” ( ISIJ International,in press) 85. D.Mazumdar: : “Mixing models for slag covered ladles: Part I: Quantifying the influence of a slag layer” ( Materials and Metallurgical Transactions B, in Press). 86. S.P.Patil, D.Satish and .D.Mazumdar: “Mixing models for slag covered ladles Part II: Mixing time correlations” ( Materials and Metallurgical Transactions B, in Press).
|