Papers Published in Conference Proceedings

S.No. Author(s) Year Title Name and Place of Conference
1. J. Ramkumar, S. Aravindan and R. Krishnamurhty 2000 Response of High Frequency, low amplitude impact and Low frequency, High amplitude impact test on joining of SiC by microwave hybrid heating techniques International Seminar on Manufacturing technology beyond 2000, India.
2. J. Ramkumar, S. Arul, S. K. Malhotra and R. Krishnamurthy 2000 Online monitoring of oscillatory drilling of polymeric composites through acoustic emission High temperature Fiber composite materials-2000, India.
3. J. Ramkumar, S. Aravindhan, S.K. Malhotra and R. Krishnamurthy 2000 Drilling of Fiber reinforced composites using microwave treated cutting WC inserts RAMP-2001, 358-365, India
4. J. Ramkumar, R. Krishnamurthy and S. K. Malhotra 2000 Defect Evaluation through online monitoring on Drilling of Carbon reinforced composites using brazed WC Inserted Drill Manufacturing Engineering in twenty first century-2001, 25-28, India.
5. J. Ramkumar, R. Krishnamurthy and S. K. Malhotra 2001 Ultrasonic drilling of polymeric composites CANCOM 2001, Canada.
6. J. Ramkumar, R. Krishnamurthy and S. K. Malhotra 2001 On-line monitoring of material response of GFRP composites during ultrasonic machining through Acousctic Emission CAR & FOF 2001, South Africa.
7. J. Ramkumar, S. K. Malhotra and R. Krishnamurthy 2003 Effect of workpiece vibration on drilling of GFRP laminates ISAMPE, India.
8. J. Ramkumar, S. K. Malhotra and R. Krishnamurthy 2003 Effect of Lay-up on drilling of GFRP composites ICCST- 2003,  South Africa.
9. S. Aravindan, J. Ramkumar and A. K. Sharma 2004 Role of microwave in manufacturing  CAMMT,  India
10. J. Ramkumar, S. K. Malhotra and R. Krishnamurty 2004 Damage Tolerancing of Drilling of GFRP composites CAMMT, India
11. S. K. Malhotra, R. Krishnamurthy and J. Ramkumar 2004 Modelling of Left over strength in Drilling of Composites Laminates COMPTEST, Bristol.
12. J. Ramkumar, “Microwave towards Nanomanufacturing 2004 Indo-Japan Workshop on Nanotechnology Tokyo, Japan.
13. Prabhat Agnihotri, Ariful Rahaman, Niranjan patra, J. Ramkumar, S. Basu and Kamal. K. Kar 2006 Influence of process parameters of electroless Ni-P coating on carbon fibers APMC, Chennai, India
14. S. Srivastava, J. Ramkumar and Kamal. K. Kar 2006 Fabrication of ABS-Alumina Nanocomposites”, Indo-Japan Workshop on Nanotechnology composites IIT Kanpur.
15. Piyush B Tailor, Ahankari S. Sureshrao, Ramkumar J. and Kamal K. Kar 2006 Abrasive Flow Machining of Carbon-Carbon Composites using Styrene Butadiene Rubber Nano Finishing, IRIkerala 2006, India
16. Sivaswamy Giribaskar, Gouthama, J. Ramkumar and Rajesh Prasad 2006 Ultra-fine grained Metallic Materials by Severe Plastic Deformation International Conference on Recent Advances in Materials and Processing), PSG College of Technology, Coimbatore
17. Prasanth Kumar, Rajeev Kumar and J. Ramkumar 2007 High Strength joints using GRPF: An experimental Study Engineering Design IN-2007, Bangalore, India.
18. Piyushkumar B. Tailor, J. Ramkumar and Kamal K. Kar 2007 “Rheological Characterization of Uncured Alumina Filled Butyl Composite ICADM, Madurai, India.
19. Piyushkumar B. Tailor, J. ramkumar and Kamal. K. Kar 2007 Composite: A Deformable Nano finishing tool International and INCCOM-6 conference on future trends in composite materials and processing, India.
20. R. S. Pawade, S.S. Joshi, P.K. Bramankar and J. Ramkumar 2007 Effect of electrode shape and rotation on EDM performance of Inconel 718 International and INCCOM-6 conference on future trends in composite materials and processing,  India.
21. S. Giribaskar, Gouthama, J. Ramkumar and R. Prasad 2007. TEM Studies on Recovery and Recrystallisation in SPD Processed Al-3%Mg Alloy International Conference on Metals And Alloys: Past, Present And Future (METALLO-2007), Indian Institute of Technology, Kanpur,
22. S. Giribaskar, Gouthama and J. Ramkumar 2007 Role of SiCP on the Microstructural Evolution of ECAE Processed Al-10%SiCP MMC International and INCCOM-6 Conference on Future Trends in Composite Materials and Processing (IINCCOM- 6), Indian Institute of Technology, Kanpur
23. Sandeep Nair and J. Ramkumar 2008 State of the art Magnetic Abrasive Finishing 14th International Conference on Frontiers in Design and Manufacturing Engineering (ICDM), India.
24. S. Aravindan and J. Ramkumar 2008 Tribological Performance of Nano Alumina Composites International Conference on Sintering 2008, California, USA.
25. Piyushkumar B Tailor, J. Ramkumar, Kamal K. Kar 2008 Rubber Composite: a Deformable Nano Finishing Tool for Viscoelastic Flow Finishing Process ICCE, KUNMING CHINA.
26. Nagahanumaiah, J. Ramkumar, Nick Glumac, S. G. Kapoor, R. E. De vor 2008 Characterization of plasma in Micro-EDM discharge using Optical Spectroscopy ICOMM – 08, September 2008 Carnegie Mellon, US
27. Anuj Kumar Garg, Nagahanumaiah, J. Ramkumar, Nick Glumac, S. G. Kapoor, R.E. De vor 2008 Understanding Gap Phenomena in Micro EDM process using underwater acoustics IWMF,  Chicago, US
28. M. Ravi Sankar, V. K. Jain, J. Ramkumar, Kamal K. Kar 2008 Rheological characterization and performance evaluation of a new medium developed for abrasive flow finishing 2nd International and 23rd All India Manufacturing Technology, Design and Research conference, IIT Madras (India)
29. R. Sandeep Nair, G. Karthikeyan, J. Ramkumar, Sunil Jha, Anil Varghese 2008 Development of MAF setup for finishing of ultra high speed shafts 2nd International and 23rd All India Manufacturing Technology, Design and Research Conference WHERE?
30. S. Kanmani Subbu, J. Ramkumar, N. J. Vasa 2009 Investigation on Laser Shot Peening (LSP) of Ti alloys International Conference on Emerging Research and Advances in Mechanical Engineering, Chennai, India
31. G. Karthikeyan, J. Ramkumar 2009 Micro Fabrication through micro EDM International Conference on Advanced Manufacturing And Automation Incama WHERE?
32. S. Kanmani Subbu, J. Ramkumar, N. J. Vasa 2009 Parametric investigation on Laser shock processing (LSP) parameters using Dimensional Analysis, Design and Manufacturing Issues Relevant to Automotive and Allied Industries IPRoMM-2009, Chennai, India
33. G. Karthikeyan, J. Ramkumar, Shalabh 2009 Estimation of diameter during machining of Tungsten electrode by micro Block EDG process, Design and Manufacturing Issues Relevant to Automotive and Allied Industries IPRoMM-2009, Chennai, India
34. Tarun Mankad, Amit Banerjee, S. Dhamodaran, J. Ramkumar and V. N. Kulkarni 2009. Dynamic Characterization of Nano Composite Pillars ME Department Poster Presentation, IIT Kanpur,
35. Mamilla Ravi Sankar, V. K. Jain and J. Ramkumar 2009 Experimental investigations into rotating workpiece abrasive flow finishing International conference on Wear of Materials (WOM-09), Las Vegas, 2009.
36. Amit Banerjee, Trun Mankad, S. Dhamodaran, J. Ramkumar, V. N. Kulkarni 2009 Exploring vibration aptitude and atto-gram mass sensing ability of FIB fabricated nano-pillars International coference cum workshop on nanosciece and nanotechnology, Ansal institute of technolgy, Gurgaon
37. S. Dhamodaran, J. Ramkumar, V. N. Kulkarni 2009 Focused ion beam fabricated nano structures: Mass sensor to opto-electronics Theme meeting on quantum structures, BARC, Mumbai,
38 G. Karthikeyan, J. Ramkumar and S. Aravindan 2009 Dimensional Analysis of Tool Wear Rate in u-EDM Milling Process COPEN 6, International Conference on Precision, Meso, Micro and Nano Engineering, Coimbatore
39 Mamilla Ravi Sankar, J. Ramkumar and V. K. Jain 2009 Nano-finishing of metal matrix composites using polymer rheological abrasive medium Processing and fabrication of advanced materials (PFAM18), Tohoku University, Sendai, Japan
40 Vivek Kumar , A. K. Singhal, J. RamKumar , S. Aravindan, S. K. Malhotra 2009 Mechanical and Tribological behavior of Glass-Epoxy Composites Modified using XNBR Elastomer TRIBO-INDIA Conference on Tribology of Automotive Systems, IIT Delhi
41. T. V. K. Gupta, J. Ramkumar, S. Nalinaksh and Vyas 2009 A study on the effect of process parameters in blind pocket milling using Abrasive Water Jet Machining Conference on Precision, Meso, Micro and Nano Manufacturing(COPEN6), PSG Coimbatore
42. T. V. K. Gupta, J. Ramkumar, N. S. Vyas 2009 A study on the effect of process parameters in blind pocket milling using Abrasive Water Jet Machining 6th International Conference on Precision, Meso, Micro and Nano Manufacturing (COPEN6), 11-12 Dec. 2009, PSG College of Engineering, Coimbatore, pp. B28-32
43 S. Kanmani Subbu, J. Ramkumar, S. Dhamodaran 2010 Plasma characteristics of dry EDM RAMTM-2010, National conference on Recent Advances in Manufacturing Technology and Management, Jadavpur University, Kolkata,19-20 Feb 10.
44 S. Kanmani Subbu, J. Ramkumar, S. Dhamodaran 2010 Plasma and Crater characteristics of dry EDM RDMT-2010, National convension on Recent Developments in Manufacturing Technology and Management, NIT, Agartala,8-9 May 10.
45 Vivek Kumar and J. Ramkumar 2010 Effect of Humidity on Impact Behavior of Glass Fiber/Epoxy Sandwich Structures RDMT-2010, National convension on Recent Developments in Manufacturing Technology and Management, NIT, Agartala,8-9 May 10.
46 M. Ravi Sankar, and J. Ramkumar 2010 High Speed Hard Turning With Minimum Quantity Lubrication RDMT-2010, National convension on Recent Developments in Manufacturing Technology and Management, NIT, Agartala,8-9 May 10
47 G. Karthikeyan, J. Ramkumar and S. Aravindan 2010 A Study on Tool Wear in Micro Electric Discharge Milling ( Micro ED-milling) Process RDMT-2010, National convension on Recent Developments in Manufacturing Technology and Management, NIT, Agartala,8-9 May 10.
48 Kumar pallav and J. Ramkumar 2010 Micro -manufacturing processes: A Brief Overview RDMT-2010, National convension on Recent Developments in Manufacturing Technology and Management, NIT, Agartala,8-9 May 10.
49 S. Kanmani Subbu, J. Ramkumar, S. Dhamodaran 2010 Invesigation of dry micro-EDM: single pulse discharge on silicon International Forum on Micro Manufacturing (IFMM) 2010, Gifu, Japan, 20-23 October ’10
50 S. Kanmani Subbu, Jitendra Kumar Kateiyar, J. Ramkumar, 2010 Dry Micro-Electric Discharge Deposition of Copper on Die steel: Effect of Pulse on-time International Workshop on Micro Factories (IWFM) 2010, 7th International Workshop on Microfactories, Daejeon Convention Centre, Korea, 24-27 October ’10
51 S. Kanmani Subbu, J. Ramkumar, S. Dhamodaran, and Sujith Sagar 2010 Investigating Non Conventional Machining of Silicon 3rd International & 24 th AIMTDR-2010, Andra Pradesh, India,13-15 December ’10
52 Kumar Pallv, J. Ramkumar, Nagahanumaiah, and Kornel F. Ehmann 2010 Numerical Simulation of the Laser Induced Plsma Micro-machining Process (LIP-MM) (IWFM) 2010, 7th International Workshop on Microfactories, Daejeon Convention Centre, Korea, 24-27 October ’10
53 Kumar Pallv, J. Ramkumar, Nagahanumaiah, and Kornel F. Ehmann 2010 Comparative Assessment of the Laser Induced Plasma Micro-machining (LIP-MM) and the Micro-EDM Process International Forum on Micro Manufacturing (IFMM) 2010, Gifu, Japan, 20-23 October ’10
54 M. Ravi Sankar, V. K. Jain and J. Ramkumar 2010 Dependence of AFF process on Rheological Characteristics of Soft styrene based organic polymer abrasive medium 3rd International and 24th All India Manufacturing Technology Design and Research Conference, Andhra University, Visakhapatnam, December13-15, 2010.
55 G. Karthikeyan, K. Sambhav, D. Santhosh and J. Ramkumar 2010 CAD Based Modeling and Prediction of Tool Wear in µED-milling 3rd International and 24th All India Manufacturing Technology Design and Research Conference, Andhra University, Visakhapatnam, December13-15, 2010.
56. Rajesh Kr. Porwal, Vinod Yadava, J.  Ramkumar 2011 Multi-Objective Optimization of Hole Drilling Electro Discharge Micromachining Process Proceedings of the International conference on precision, Meso, Micro and Nano engineering (COPEN-2011)
57 Omprakash Rawat , S. Kanmani Subbu, J. Ramkumar, and  S.Aravindan 2011 Crater Diameter of Single Discharge Micro EDM: Modeling and Experimental Comparison International conference  on Advanced Materials and Processing (ICAMP-2011), R M K Engineering College, Chennai, India
58 Omprakash Rawat, S. Kanmani Subbu. J. Ramkumar, and S. Dhamodaran 2011 Magnetic Field Assisted micro EDM–Simulation of Field Distribution and Experimental Investigation National Conference on Design and Manufacturing (NaConDM-2011), IIITD&M (Kancheepuram) 27-28, May 2011, pp. 997-992
59 S. Kanmani Subbu, J. Ramkumar, and S. Dhamodaran 2011 Micro EDM on Silicon 26th National Convention of Production Engineers and National Seminar on New Vistas Production Technologies, Jaipur, Rajasthan,  India , pp.79
60 S. Kanmani Subbu, Jitendra Kumar Kateiyar, A. Chalvane, J. Ramkumar, and S. Dhamodaran 2011 Fe-Cu Alloy Nano-particles Generation by Electric Discharge Machining 6th International Conference on Micro Manufacturing (ICOMM-2011), Tokyo Denki University, Japan, March 7-10, 2011, pp. 213-218
61. T. V. K. Gupta, J. Ramkumar, S. Nalinaksh, Vyas and Puneet Tandon 2012 A Preliminary Investigation on the forces generated with process parameters during Abrasive Water Jet Milling on SS304 International Conference on Innovations in Design and Manufacturing (InnDeM 2012), PDPM IIITDM J, Dec.05-07, 2012 (paper No. 2032).
62. T. V. K. Gupta, J. Ramkumar, S. Nalinaksh Vyas and Puneet Tandon 2012 Material removal rate prediction for blind pocket milling of SS304 using Abrasive Water Jet Machining Process Hong Kong International Conference on Engineering and Applied Science (HKICEAS) Hong Kong, (Paper No. 411)
63. S. Kanmani Subbu, S. Dhamodaran, and J. Ramkumar 2012 Investigating of Single Discharge Dry Micro EDM on Different Planes of Silicon 4th International & 25th (AIMTDR-2012), Jadhavpur university, Kolkata, India
64. S. Kanmani Subbu, S. Dhamodaran, and J. Ramkumar 2012 Micro-electric Discharge Plasma: Characterization and Applications International conference on Microactuators and Micromechanisms (MAMM-2012), CSIR-CMERI, Durgapur, India
65. Rajesh Kr. Porwal, Vinod Yadava and J.  Ramkumar 2013 Optimization of process parameters in the hole sinking electro discharge micromachining using GRA-PCA Proceedings of the International conference on Recent Advances in Material Processing Technology, (RAMPT-13).
66. T V K Gupta, J. Ramkumar, Puneet Tandon, N S Vyas 2013 Role of process parameters on pocket milling with Abrasive Water Jet Machining technique International Conference on Aerospace, Mechanical, Automotive and Materials Engineering, ICAMAME 2013, Dubai, UAE.  Published in Word Academy of Science, Engineering and Technology, Issue 82, October, 2013, pp.1374-1379.
67. Gupta, T.V.K., Puneet Tandon, Ramkumar J. and N.S Vyas 2013 Influence of process parameters on the dimensions of the channels prepared using abrasive water jet machining 2013 ASME International Mechanical Engineering Congress and Exposition (IMECHE), November 15-21, 2013, San Diego, CA, USA, Ref No. IMECE-64063
68. Vaibhav shukla, S. Nadeem, S. Kanmani Subbu and J. Ramkumar 2013 Fabrication of complex Micro-channels by micro EDM Milling 2013 ASME International Mechanical Engineering Congress and Exposition (IMECHE), November 15-21, 2013, San Diego, CA, USA, Ref No. IMECE-64031
69. Syed Nadeem Aktar, J. Ramkumar and S. Antharama krishnan 2013 Microfeature edge quality optimization in excimer laser ablation of metallic film 2013 ASME International Mechanical Engineering Congress and Exposition (IMECHE), November 15-21, 2013, San Diego, CA, USA, Ref No. IMECE-64149
70. Kanmani Subbu, J. Ramkumar & S. Damodharan 2013 Effect of magnetic field in single discharge dry micro EDM on Si and Stainless steel 2013 ASME International Mechanical Engineering Congress and Exposition (IMECHE), November 15-21, 2013, San Diego, CA, USA, Ref No. IMECE-67138
71. S. Kanmani Subbu, S. Dhamodaran, and J.Ramkumar 2013 EDM and µ-EDM Plasma Parameters Measurement: Overview A National Conference on Manufacturing: Vision for Future (MVF-2013), IIT Guwahati
72. Ravi Kumar Dungroth  J. Ramkumar, and S. Kanmani Subbu 2013 Multi Objective Optimization of EDM Parameters on Machining Carbon-Carbon Composites using RSM-GRA Approach An International Conference on Precision, Meso, Micro and Nano Engineering (COPEN-8)
73. B. Muralitharan, J. Ramkumar & Chelladurai 2013 Influence of process parameters on the dimensions of the channels prepared using abrasive water jet machining 2013 ASME International Mechanical Engineering Congress and Exposition (IMECHE), November 15-21, 2013, San Diego, CA, USA, Ref No. IMECE-64063
74. Sachin Singh, M. Ravi Sankar,V. K. Jain and J. Ramkumar 2014 Modeling of Finishing Forces and Surface Roughness in Abrasive Flow Finishing (AFF) Process Using Rheological Properties 5th International and 26th All India

Manufacturing Technology, Design and Research Conference, IIT Guwahati, Dec 2014
75. T. V. K. Gupta, J. Ramkumar, Puneet Tandon and N. S. Vyas 2014 Application of Grey Relational Analysis for Geometrical Characteristics in Abrasive Water Jet Milled Channels 5th International and 26th All India

Manufacturing Technology, Design and Research Conference, IIT Guwahati, Dec 2014
76. J.M. Jafferson, P. Hariharan and J. Ram Kumar 2014  Effect of Layer Thickness in Micro Electric Discharge Milling: An Experimental Investigation 5th International and 26th All India

Manufacturing Technology, Design and Research Conference, IIT Guwahati, Dec 2014
78. Syed Nadeem Akhtar, Shashank Sharma and J. Ramkumar 2014 Fabrication of micro lens array by excimer laser micromachining 5th International and 26th All India

Manufacturing Technology, Design and Research Conference, IIT Guwahati, Dec 2014
79. Gupta, T.V.K., Ramkumar J., Puneet Tandon and Vyas, N.S. 2014 “State of the art on Abrasive Water

Jet milling: Challenges ahead”

 ICMMM 2014 International Colloquium on Materials,

Manufacturing and Metrology, August 8-9, 2014, IIT Madras. Ref No. ICM2586
80. J. Ramkumar, Syed Nadeem Akhtar and S. A. Ramakrishna 2015 Large area texturing of metal surfaces 3rd International Conference on Laser and Plasma Applications in Materials Science, Jan 2015, Kolkata.
81. Leeladhar Nagdeve, V. K. Jain and J. Ramkumar 2015 Nano-finishing of freeform/Sculptured surfaces: A review International conference on Precision, Meso, Micro and Nano Engineering (COPEN9)
82. S. Sharma, S. N. Akhtar, , Y. Pachaury & J. Ramkumar 2015 A study on hydrodynamics of melt expulsion in Nd:YAG laser drilling of titanium Proceedings of COMSOL CONFERENCE
83. S. Sharma, S. N. Akhtar, , Y. Pachaury & J. Ramkumar 2015 A study on millisecond underwater laser ablation of thin titanium sheets, proceedings of COPEN’15
84. Vishal Kumar, J. Ramkumar, R. K. Gupta 2015 Experimental Investigations on Micro-hole EDM Drilling in γ-TiAl International Conference on Precision, Meso, Micro and Nano Engineering (COPEN-9)
85. Leeladhar Nagdeve, V. K. Jain and J. Ramkumar 2016 Experimental Investigations into nano-finishing of freeform surfaces using negative replica of the knee joint joint18th CIRP International conference on Electro Physical and Chemical Machining (ISEM XVIII) (Accepted)
86. Divyansh Patel, V. K. Jain, J. Ramkumar, Ankit Shrivastava 2016 Preliminary study of effect of surface texturing on hypodermic needles International conference on nanotechnology for better living (Accepted)
87. Hitendra Kumar, J. Ramkumar, K. S. Venkatesh 2016 Micro/Nano Surface texture evaluation by reconstruction from images using approximated BRDF model International conference on nanotechnology for better living (Accepted)
88. Abhilasha Singh, Divyansh Patel, J. Ramkumar, K. Balani 2016 Micro-channels fabrication through pulsed Nd:YAG laser on Ti6Al4V International conference on nanotechnology for better living (Accepted)
89. Vishal Kumar, J. Ramkumar, R. K. Gupta 2016 Optimization Study of Electric Discharge Trepanning Process on CP70 International conference on nanotechnology for better living (Accepted)
90. Prashnath K, Divyansh Patel, V. K. Jain, J. Ramkumar 2016 Finite element analysis for shape prediction of micro-dimples produced through ECMM International conference on nanotechnology for better living (Accepted)
91. G. Parameswari Guides: Dr.V. K . Jain, Dr. J Ramkumar 2016 Magneto rheological finishing of Ti-4Al-6V disc International conference on nanotechnology for better living (Accepted)
92. J. Torres, F. Islam, B. Crawford, L. Bichler, A.S. Milani 2014 The effect of design parameters on the quality of open molded fiber reinforced composites with sharp corners SAMPE 2014 Conference, Seattle, USA
93. F. Islam, J. Ramkumar, A.S. Milani 2015 Prediction and quantification of damage during milling of unidirectional carbon fiber reinforced plastics (CFRPs) International conf. on manufacturing of advanced composites (ICMAC 2015), June 24-25, Bristol, UK
94. A.S. Milani, D. Frey, R. Seethaler, J. Ramkumar, B. Crawford, H. Teimouri, F. Islam, P. Pal 2016 A roadmap to account for potential uncertainties in non-destructive testing during structural health monitoring of composites (2016) 31st ASC Technical Conference and ASTM D30 Meeting, September 19-22, Williamsburg, USA
95. G.Parameswari, V.K.Jain, J. Ramkumar 2016 Development of nano finishing technique for flat and curved plates Proc. of the Intl. Conf. on Nanotechnology for Better Living, 2016.
96. G. Parameswari, V.K.Jain, J. Ramkumar 2016 Experimental investigations into nano finishing technique for flat ti-6al-4v disc Conference AIMTDR 2016
97. Sharma, S., Akhtar, S. N., Pachaury, Y., & Ramkumar, J. (2015) 2016 A study on hydrodynamics of melt expulsion in Nd:YAG laser drilling of titanium Proceedings of COMSOL CONFERENCE 2015, Pune India
98. Sharma, S., Akhtar, S. N., & Ramkumar, J. 2015 A study on millisecond underwater laser ablation of thin titanium sheets proceedings of COPEN15 IIT Bombay.
99. Ajay Vardhaman B.S, DurweshJhodkar, J. Ramkumar, M. Amarnath, H. Chelladurai 2014 Tool wear assessment in turning AISI 1040 steel using cutting force signature analysis International Colloquium on Materials, Manufacturing and Metrology (ICMMM-14), IIT Madras. 2014
100. Ajay Vardhaman B.S, DurweshJhodkar, J. Ramkumar, M. Amarnath, H. Chelladura 2015 Examining the Role of Cutting Fluids in Machining AISI 1040 Steel Using Tungsten Carbide Insert under Minimal Quantity Lubrication Condition Institute of Engineers (IIE Conferences), London (UK),2015.
101. Gaganpreet Singh, Shashank Sharma, Kartar Singh and J. Ramkumar 2016 Feasibility study of micromachining of silicon wafer with excimer Laser using COMSOL multiphysics Proc. of the Intl. Conf. on Nanotechnology for Better Living, 2016
102. Abhilasha Singh, Divyansh Patel, J. Ramkumar, Kantesh Balani 2016 Viscosity Affecting Wettability of Laser Textured Surfaces AIMTDR 2016,College of Engineering Pune
103. Mahavir Singh, V.K. Jain and J. Ramkumar 2016 Experimental Investigations into Turbulated Holes using Shaped Tube Electrochemical Machining AIMTDR 2016,College of Engineering Pune
104. Vyom Sharma, V.K. Jain and J. Ramkumar 2016 Experimental Analysis of Wire Electrochemical Machining Process AIMTDR 2016,College of Engineering Pune
105. Gaganpreet Singh,J. Ramkumar, S. Anantha Ramakrishnan 2017 Micromachining of Silicon using Excimer laser for MEMS applications Proceedings of 10th international conference on Precision,Meso,Micro and Nano Engineering (COPEN 10)
106. Y.K. Penke, G. Anantharaman, J. Ramkumar, K.K. Kar 2017 Redox active Mn-Al-Fe ternary metal oxide Nano adsorbent for Arsenic Remediaion and Mitigation by Significant As (0) formation behavior 5th Nano Today Conference, December 6-10, 2017 (Hawaii, USA)
107. B.S. Ajay Vardhaman, M. Amarnath, J. Ramkumar 2017 Experimental investigation on the tribological behaviour of nano boric acid and FMWCNTs as oil additives on bronze alloy surface International Conference on Manufacturing Technology and Simulation (ICMTS), IIT Madras 2017
108. T. U. Siddiqui, J. Ramkumar 2017 Micro-wire electric discharge machining of Mg alloy used in biodegradable orthopaedic implants ICEMS 2017
109. Singh, A., Philip, D., Ramkumar, J. 2017 A review on work environment quality in shop floor: Impact of aerosols IEEE Region 10 Humanitarian Technology Conference, R10-HTC 2017: Proceedings
110. Singh, A., Singh, S., Philip, D., Ramkumar, J. 2017 A review on NIOSH lifting equation applicability IEEE Region 10 Humanitarian Technology Conference, R10-HTC 2017: Proceedings
111. H. Sheokand, G. Singh, S. Ghosh, M. Saikia, K.V. Srivastava, J. Ramkumar, S. Anantha Ramakrishna 2018 An Optically Transparent Microwave Broadband Absorber using Resistive Sheet National Conference on Communication
112. Mahavir Singh,Devesh Kumar Chaubey, J. Ramkumar 2018 Numerical Simulation of the Micro-EDM Process using Multi-Spark Approach Annual Technical Volume of Production Engg. Division Board: The Institute of Engineers (India), Vol.III 2018