S.No. Author(s) Year Title Complete Reference of Journal
1. S. Aravindan, J. Ramkumar and R. Krishnamurthy 2000 Microwave Joining of Al2O3 and SiC with Glass Inter layer Microwave and Radio Frequency Processing Ceramic Transactions Vol 3, 287-294
2 J. Ramkumar, SK Malhotra, R Krishnamurthy 2000 Online monitoring of oscillatory drilling of polymeric composites through acoustic emission Indo-German Workshop on High Temperature Fibre Composite Materials, 231-242
3. J. Ramkumar, R. Krishnamurthy and S. K. Mal 2001 Influence of tool status on flexural strength of machined CFRP components Journal of Advanced composites letters, 10(4), 178-187
4. J. Ramkumar, S. K. Malhotra and R. Krishnamurthy 2002 Studies on drilling of glass/epoxy laminates using coated high-speed steel drills Journal of Materials and Manufacturing Processes, 17(2), 313-322
5. J. Ramkumar, S. Aravindan, S. K. Malhotra, and R. Krishnamurthy 2002 Enhancing the metallurgical properties of WC insert (K-20) cutting tool through microwave treatment Journal of materials letters, 53(3), 200-204.
6. A. Kakitsuji, J. Ramkumar, J. kinose, H. Mabuchi, H.Tsuda and K. Morii 2002 Synthesis of TiAl(Cr)/Ti2AlC composites by reactive arc-melting Journal of Materials Transactions, 43(10), 2589-2592
7. Morikawa. D, J. Ramkumar, H. Mabuchi, H. Tsuda, T. Matsui, and K. Morii, 2002 Microstructure and mechanical properties of Ti-B-N cast alloys prepared by reactive arc-melting Journal of Material Transactions, 43(8), 2193-2196
8. S. Aravindan, J. Ramkumar, S. K. Malhotra and R. Krishnamurthy 2003 Enhancement of cutting performance of cemented carbide cuttings tools by microwave treatment Microwave and Radio Frequency Processing Ceramic Transactions, 199-206, 2003.
9. J. Ramkumar, S. KMalhotra, R. Krishnamurthy, Mabuchi. H, K. Demizu, K. Kakitsuji, H. Tsuda, T. Matsui and K. Morii 2003 Microstructure and dry sliding wear of Ti-50Al alloy and Ti-47Al-3W/Ti2AlCcomposites produced by reactive arc-melting Journal of Material Transactions, 44(9), 1861-1865
10. J. Ramkumar, A. Kaakitsuji. S.K. Malhotra, R. Krishnamurthy, H. Mabuchi, H. Tsuda, T. Matsui, and K. Morii 2003 Mechanical and erosion behavior of Ti-47Al-3W/Ti2AlC composites by reactive arc melting Journal of Advanced composites letters, 12(4), 141-148
11. J. Ramkumar, Aravindan. S, S. K. Malhotra and R. Krishnamurthy 2004 An enhancement of machining performance of GFRP by oscillatory assisted drilling International Journal of Advanced manufacturing technology, 23(3-4): 240-244
12. J. Ramkumar, S. K. Malhotra and R. Krishnamurthy, 2004 Effect of workpiece vibration on drilling of GFRP laminates Journal of Materials Processing Technology, 152(3), 329-332
13. J. Ramkumar, Malhotra S.K., and R. Krishnamurthy 2005 Effect of microwave treatment of WC

inserts for drilling of GFRP composites

Machining Science and Technology 9(2): 263-269
14. B.V. Manojkumar, Bikramjit Basu, S. Kang and J. Ramkumar 2006 Erosion Wear behavior of TiCNNicermets containing secondary carbide (WC/NbC/TaC) Journal of American Ceramic Society, Vol. 89(12), pp. 3827-3831
15. Prasanth Kumar, Axay Kumar, Kamal. K. Kar and J. Ramkumar 2006 Experimental Characterization of thin Sandwich Panel of Polymer Composite Journal of Advanced Composite letters, Vol. 15(3), pp. 89-98
16. K. K. Kar, S.D. Sharma, P. Kumar, J. Ramkumar, R.K. Appaji and K. R. N. Reddy 2006 Analysis of

Rubber Pressure Molding Technique to Fabricate Fiber Reinforced Plastic components

Polymer Composites, Vol. 28, (5) pp. 637-649
17. Deep, K. S., Reddy, N. V., Agrawal, A., J. Ramkumar. 2006
 
A Mathematical Model for

Determination of Limiting Blank Holding Force and Cavity Pressure in Hydromechanical Deep Drawing

Journal of Engineering Manufacture, Vol. 221 (2), pp. 155-162.
18. K. K. Kar, S.D. Sharma, P. Kumar, J. Ramkumar, R. K. Appaji and K. R. N. Reddy 2007 Pressure

Distribution Analysis of Fiber Reinforced Plastic Components made by Rubber Pressure

Molding Technique

Journal of Applied Polymer Science, Vol. 105(6) ,pp.  3333 -3354
19. B. V. Manoj Kumar, J.  Ramkumar, B. Basu and S. Kang 2007 Electro-discharge machining performance of TiCN-based cermets International Journal of Refractory Metals and Hard Materials, 25 392-399.
20. B.V. Manoj Kumar, J. Ram Kumar and Bikramjit Basu, 2007 Crater Wear Mechanism of TiCN-Ni-WC Cermets during Dry Machining International Journal of Refractory Metals & Hard Materials 25 (2007) 293-299.
21. J. Ramkumar, A. K. Singhal, Ritesh Kumar Singh and Prashant kumar 2007 Butt joining of similar &Dissimilar pipe material by cold joining process Journal of Advanced Composite letters, Vol.16,(5), pp. 173-179.
22. P. B. Tailor, J. Ramkumar and K. K. Kar 2007 Experimental investigation on effect of alumina filler in butyl through mechanical properties Journal of Engineering and technology, Vol. 20, 35-39
23. M. Ravishankar, S. Mondal, J. Ramkumar and V. K. Jain 2008 Experimental investigations and modeling of drill bit guided abrasive flow finishing (DBG-AFF) process Int. J. Adv. Manuf. Technol., 2009, 42,678-688
24. J. Ramkumar and T. Machida 2008 Defect controlled Water Jet Piercing of Continuous Fiber

Reinforced Plastics

Journal of Advance Composite letters, Vol. 17( 2), pp. 55-63.
25. A. Palani, S.KanmaniSubbu, N.J.Vasa, J.Ramkumar and M.Singaperumal 2008 Laser based Surface Processing of Engineering Materials- State of the Art. International Journal on Design and Manufacturing Technologies, vol. 2, (1), pp.. 1-9
26. Giribaskar, S., Gouthama, Prasad, R., Ramkumar, J 2008 TEM studies on recovery and recrystallisation in equal channel angular extrusion processed Al-3%Mg Alloy Transactions of the Indian Institute of Metals 61 (2-3), pp. 171-176
27 I. A. Palani, S. Kanmani Subbu, N. J. Vasa, J. Ramkumar and M. Singaperumal 2008 Laser based Surface Processing of Engineering Materials- State of the Art International Journal on Design and Manufacturing Technologies, Vol. 2, No. 1, pp. 1-9, 2008
28. Mamilla Ravi Sankar, V. K. Jain and J. Ramkumar 2009 Experimental investigations into rotating

workpiece Abrasive flow finishing

Wear, Vol. 267 (1-4), pp. 43-51
29. Kamal K. Kar, N. L. Ravikumar, Piyushkumar B. Tailor, J. Ramkumar, D. Sathiyamoorthy 2009 Preferential Media for Abrasive Flow Machining J. Manuf. Sci. Eng. 131(1), p 011009 (pp 11)
30. Kamal K. Kar, N. L. Ravikumar, Piyushkumar B. Tailor, J. Ramkumar, D. Sathiyamoorthy, 2009 Performance Evaluation and Rheological Characterization of Newly Developed Butyl Rubber Based Media for Abrasive Flow Machining Process Journal of Materials Processing Technology, Vol. 209, (4)pp.  2212-2221
31. Mamilla Ravi Sankar, J. Ramkumar and V. K. Jain,  2009 Experimental investigation and mechanism of material removal in nano finishing of MMCs using abrasive flow finishing (AFF) process Wear, Vol. 266, (7-8), pp 688-698.
32. Mamilla Ravi Shankar, S. Mondal, J. Ramkumar, V. K. Jain 2009 Experimental Investigations and

Modeling of Drill Bit Guided Abrasive Flow Finishing (DBG-AFF) Process

International journal of Advanced Manufacturing Technology, Vol. 42, (7-8) pp. 678-688
33. Amit Banerjee, TrunMankad, S. Dhamodaran, J. Ramkumar, V. N. Kulkarni 2009 The Measurement Of attogram mass Accumulation On nanostructures During e-Beam Scanning Using Carbon Nano Pillars in Resonant Mode Journal of Nano Technology, 20,(34) p 345501 (pp7).
34. Vivek Kumar , J. RamKumar , S. Aravindan , S. K. Malhotra, K. Vijai, Mukhul Shukla 2009 Fabrication and Characterization of ABS Nano composite reinforced by Nano sized alumina particulates International Journal of Plastic Technology, Vol. 13,( 2), pp.. 133-149
35. Nagahanumaiaha, JanakarajanRamkumarb, Nick Glumacc, Shiv G. Kapoorc and Richard E.

DeVor

2009 Characterization of plasma in micro-EDM discharge using optical spectroscopy Journalof Manufacturing Technology, Vol. 11, PP 82-87
36. M. Ravi Sankar, V. K. Jain, J. Ramkumar, Kamal K. Kar 2010 Rheological characterization and performance evaluation of a new medium developed for abrasive flow finishing International Journal of Precision Technology, Vol. 1, No. 3-4, PP 302-313
37. G. Karthikeyan, J. Ramkumar, S. Dhamodaran and S. Aravindan 2010 Micro ED-milling Process Performance: An Experimental Investigation International Journal of Machine tools and Manufacture, Vol. 50, PP 718-727
38. K. Ponappa, S. Aravindan, P. V. Rao, J. Ramkumar, M. Gupta 2010 The Effect of Process Parameters on Machining of Magnesium Nano Alumina Composite Through EDM The International Journal of Advanced Manufacturing Technology ,Vol 46 ( 9-12) , pp 1035-1042
39. A. K. Singhal, Rashmi R. Devi, Vivek Kumar, J. Ramkumar, R. K. Singh 2010 XNBR Toughened Epoxy-Glass Fabric Composites: An Evaluation of their Static and Dynamic Mechanical Properties International Journal of Polymer Materials, Vol.27, (2),pp. 97-112
40. A.K. Singhal, Vivek Kumar, J. Ramkumar, R. K. Singh and S. K. Malhotra 2010 Experimental investigation of mechanical and tribological performance of XNBR rubber modified epoxy under dry sliding condition International Journal of Plastic Technology, Volume 14, (1) ,pp 93-103.
41. V. Kumar, J. Ramkumar, P Kumar, S. K.  Malhotra 2010 Mechanical and Tribological Properties of Jute Sandwich Structures Journal of Polymer Materials 27 (3), 267-281
42. M. Ravi Sankar, V. K. Jain, J. Ramkumar 2010 Rotational abrasive flow finishing (R-AFF) process and its effects on finished surface topography International Journal of Machine tools and Manufacture, Vol. 50, pp 637-650
43. S. Dhamodaran, J. Ramkumar 2010 Controlling the nano-dot formation on GaAs surface during focused gallium ion beam processing Radiation effectsand defects in solids, Volume 165, (12), pp.889-893.
44. M. Ravi Sankar, J. Ramkumar, S. Aravindan 2011 Machining of metal matrix composites with minimum quantity cutting fluid and flood cooling Advanced Materials Research, Materials and manufacturing ,vol 299-300, pp. 1052-1055
45. Sumedah Kulkarni, Syed Nadeem Akther, J. Ramkumar 2011 Experimental investigation of formability enhancement using hydraulic counter pressure assisted warm deep drawing Advanced Materials Research, Materials and Manufacturing, vol 299-300,pp. 364-367,.
46. A. Dhabal, D. S.  Chander, J. Ramkumar, S.  Dhamodaran 2011 Negative differential resistance in isolated GaN nano wires with focused electron beam deposited platinum contacts Micro &Nano Letters 6 (4), 280-283
47. D. Sathish Chander, J. Ramkumar, S.  Dhamodaran 2011 Controlled 1-D to 3-D growth mode transition of GaN nano structures and their optical properties Physica E: Low-dimensional Systems and Nanostructures 43 (9), 1683-1687
48. S. K.  Subbu, G.  Karthikeyan, J.  Ramkumar, S.  Dhamodaran 2011 Plasma characterization of dry micro-EDM The International Journal of Advanced Manufacturing Technology 56 (1-4), 187-195
49. S. Kanmani Subbu, J. Ramkumar, and S. Dhamodaran 2011 Plasma Temperature and Electron Density of Dry micro-EDM on Stainless Steel and Silicon: A Comparison International Journal of Automation Technology, Vol. 5, No. 1, pp. 45-51, 2011
50. S. Dhamodaran, D. S. Chander, J. Ramkumar 2011 Anti-reflective and hydrophobic surface of self-organized GaNnano-flowers Applied Surface Science 257 (22), 9612-9615
51. M. Ravi Sankar, V. K. Jain, J. Ramkumar, and Y. M. Joshi 2011 Rheological characterization of Styrene-Butadiene based medium and its finishing performance using rotational abrasive flow finishing processes International Journal of Machine tool and Manufacture, vol 51,(12), pp. 947-957
52. S. Kanmani Subbu, J. Ramkumar, S. Dhamodaran 2011 Elemental identification of materials using optical emission spectra during electric discharge machining Advanced Materials Research 299, 1330-1333
53. S. Kanmani Subbu, J. Ramkumar, S. Dhamodaran 2011 Single Discharge of Dry micro-EDM on Silicon: Crater and Plasma Temperature Measurement Advanced Materials Research 299, 1334-1337
54. S. Kanmani Subbu, G. Karthikeyan, J. Ramkumar, and S. Dhamodaran 2011 Plasma Characterization of Dry micro-EDM The International Journal of Advanced Manufacturing Technology, Vol. 56, pp. 187-195
55. Omprakash Rawat, S. Kanmani Subbu, J. Ramkumar, and S. Dhamodaran 2011 Magnetic Field Assisted micro EDM-Simulation of Field Distribution and Experimental Investigation International Journal of Applied Engineering Research, Vol. 6, No. 5, pp. 987-992, 2011.
56. Sandeep Nair, Trilok Singh, Ramkumar J., Sunil Jha 2011 Development and Experimental Investigation of MAF Setup for Finishing of Ultra High Speed Shafts International Journal of Abrasive Technology, Vol 4 (4), pp.. 325-345
57. S. Dhamodaran, D Sathish Chander, J.  Ramkumar 2011 GaN nanowires grown on silicon substrates engraved using stainless-steel micro-tip Materials Letters 65, 2398-2400
58. S. Dhamodaran, D.  Sathish Chander, J.  Ramkumar 2011 Anti-reflective and hydrophobic surface of self organizedGaNnanoflowers Applied Surface Science, 257, 9612
59. G. Karthikeyan, K. Sambhav, J. Ramkumar, S. Dhamodaran 2011 Simulation and experimental realization of micro-channels using a micro ED-milling process

..

Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Vol.225, (12) pp.2206-2219.
60. S. Karthikeyan, Anuj K. Garg, J. Ramkumar, S. Dhamodaran 2012 A microscopic investigation of machining behavior in micro ED-milling Process Journal of Manufacturing Processes, Vol 4, issue 3,pp 297-306
61. G. Karthikeyan, K. Sambhav, D. Santhosh and J. Ramkumar 2012 CAD based modeling and prediction of tool wear in micro ED-milling International journal of manufacturing technology research, vol 4, issue 1/2, pp 21-34
62. M. R. Sankar, V. K. Jain, J. Ramkumar, and Y. M. Joshi 2012 Dependence of R-AFF process on

rheological characteristics of soft styrene based organic polymer abrasive medium

International Journal of manufacturing technology research, vol 4, issue 1/2, pp 89-104
63. M. Ravisankar, J. Ramkumar, V. K. Jain 2012 Abrasive Flow Finishing (AFF)  for Micro manufacturing Micromanufacturing Processes, 183
64. M.R. Sankar, V.K. Jain, J. Ramkumar 2012 Effect of Abrasive Medium Ingredients on Finishing of Al Alloy and Al Alloy/SiC Metal Matrix Composites Using Rotational Abrasive Flow Finishing Applied Mechanics and Materials 110, 1328-1335
65. I. Sen, G. Karthikeyan, J.  Ramkumar, R.  Balasubramaniam 2012 A Study on Machinability of B-Modified Ti-6Al-4V Alloys by EDM Materials and Manufacturing Processes 27 (3), 348-354
 

66.

 

S. Kanmani Subbu, J. Ramkumar, S. Dhamodaran

 

2012

Investigation of Single Pulse Discharge on Silicon: Crater and Plasma Characteristics   

International Journal of Mechatronics and Manufacturing Systems, Vol 5, (5-6), pp 455-469

67. S. Kanmani Subbu, J. Ramkumar, and S. Dhamodaran 2012 Micro-Electric Discharge Plasma: Characterization and Applications Journal of Materials and Manufacturing processes, Vol. 27, No. 11, pp. 1208-1212, 2012.
68. Satish Chander D., J. Ramkumar, Dhamodaran S. 2012 A comparison between Raman scattering from GaNnano wires and polyhedrons Nanoscience Methods, Vol 1, pp 129-136
 

69.

Satish Chander D., J. Ramkumar, Dhamodaran S., 2012 Catalyst and its diameter dependent growth kinetics of CVD grown nanowires Materials Research Bulletin, Vol 47, (4), pp 952-956
70. Rajesh kumar porwal, Vinod Yadava, J.  Ramkumar 2012 Artificial neural network modeling and

multi objective optimization of hole drilling electro discharge micro machining of invar

International Journal of Mechatronics and Manufacturing Systems, Vol. 5, No 5/6,pp 470-494
71. Banerjee, A., Mankad, T., Dhamodaran, S., Ramkumar, J., Kulkarni 2012 Dynamic characterization and mechanical properties of FIB grown nano pillars International Journal of Nanotechnology 9 (10-12) , pp. 972-981
72. Rajesh Kumar Porwal, Vinod Yadava  and J. Ramkumar 2012 Artificial neural network modeling and multi objective optimization of hole drilling electro discharge micro machining of invar International Journal of Mechatronics and Manufacturing Systems, Vol. 5, (5/6), pp. 264-289
73. G. Karthikeyan, J. Ramkumar, S.  Aravindan 2012 Performance analysis of micro ED-milling process using various statistical techniques International Journal of Machining and Machinability of Materials VO. 11 (2) pp. 183-203
74. C. Samanta, D. S. Chander, J.  Ramkumar, S.  Dhamodaran 2012 Catalyst and its diameter dependent growth kinetics of CVD grown GaN nanowires Materials Research Bulletin 47 (4), 952-956
75. Rajesh Kumar Porwal, Vinod Yadava and J. Ramkumar 2013 Optimization of process parameters in the hole drilling electrical discharge micro machining of titanium based super alloy thin sheet. Journal of Machining and Forming Technology, Vol. 5, pp. 175-188
76. Rajesh Kumar Porwal, Vinod Yadava and J. Ramkumar 2013 Modeling and Optimization of Hole Drilling Electrical Discharge Micromachining Process of Ti-6Al-4V Thin Sheet International Journal of Precision Technology, Vol. 3, No.2,  pp. 183-205
77. Chandra Sekhar Sathua, V. K.  Jain, J. Ramkumar, Ajay Sidpara  2013 Analysis of Forces and Surface Roughness in Magnetic Abrasive Finishing with a ball end tool Int.J. Precision Technology, Vol 3, No 2,pp 131-142
78. Avinash Kumar, Ankur Gupta, Rishi Kant, Syed Nadeem Akhtar, Nachiketa Tiwari, J. Ramkumar, Shantau Bhattachary 2013 Optimization of laser machining process for the preparation of photo masks and its application to micro systems fabrication Journal of Micro/Nanolithography, MEMS and MOEMS.Vo. 12. No.4 p041203 (9 pp)
79. Kumar Pallav, Peidog Han, J. Ramkumar, NagHanumaiah, KornelEhman 2013 Comparative Assessment of the laser induced plasma Micro-Machining (LIP-MM) and the Micro-EDM processes J.Manuf.Sci.Eng, DOI 10.1115/1.4025391.
80. T. V. K. Gupta, J. Ramkumar, Puneet Tandon, N. S. Vyas 2013 A study on the deviations of the jet with traverse speeds of different materials in pocket milling using Abrasive water Jet Machining Processes Applied Mechanics & Materials, Vol.372,pp 402-405, Trans Tech Publications,
81. Gupta T. V. K., Ramkumar J., Tandon P., and Vyas N.

S,

2013. Role of process parameters on pocket milling with

Abrasive Water Jet Machining technique,

World Academy of Science, Engineering and Technology, Issue 82, pp.1374-1379
82. Govind Dayal, Syed Nadeem Akhtar, S. Anatha Ramkrishnan and J. Ramkumar 2013 Excimer laser micromachining using binary mask protection for large are patterning with single micrometer feature J.Micro Nano-Manuf.1.031002 1(3) (7pages); DOI: 10.1115/1.4024880.
83. Rajesh Kumar Porwal, Vinod Yadava, J. Ramkumar 2013 Modeling and Multi-Response Optimization of hole sinking electrical discharge micromachining of titanium alloy thin sheet Joural of Mechanical science and Technology, Paper number: MEST-D-1300358R1, 3(2), pp 183-205

 

 

84.

Rajesh Kr. Porwal, Vinod Yadava, J.  Ramkumar  

2013

Optimization of process parameters in the hole sinking electro discharge micromachining using GRA-PCA Journal of Manufacturing Engineering, Vol. 8, ( 2), pp. 96-104
 

85.

Rajesh Kumar Porwal, Vinod Yadava, J. Ramkumar 2013 Modeling and Multi-Response Optimization of Hole Sinking Electrical Discharge Micromachining of Titanium alloy Thin Sheet,  Journal of Machining and Forming Technologies Volume 5 (1-2), 75-88
86. Rajesh Kumar Porwal, Vinod Yadava, J. Ramkumar 2013 Multi-Objective Optimization of Hole Drilling Electrical Discharge Micromachining Process using Grey Relational Analysis coupled with Principal Component Analysis Journal of The Institution of Engineers (India): Series C, Volume 94, ( 4), pp 317-325
87. T. V. K. Gupta, J. Ramkumar, Puneet Tandon, N. S. Vyas 2013 Role of process parameters on pocket milling with Abrasive Water Jet Machining technique International Journal of Mechanical Science and Engineering, 2013, Vol. 7, No. 10, pp. 627-632
88. Gupta T. V. K., Ramkumar J., Tandon P., and Vyas N.

S.,

2013 A study on deviations of the jet with traverse

speeds on different materials in pocket milling using

Abrasive Water Jet Machining Process,

International Journal of Applied Mechanics and Materials, 372,  402-405.
89. Rajesh Kumar Porwal, Vinod Yadava, J. Ramkumar 2014 Neural Network based Modeling and GRA coupled PCA Optimization of Hole Sinking Electro Discharge Micro machining International Journal of Manufacturing, Materials, and Mechanical Engineering.

4(1), pp. 1-21.

90. Syed Nadeem Akhtar, Hirendra Choudhary, S.  Anantha Ramakrishna and J. Ramkumar 2014 Simulation and experiments on excimer laser micromachining of metal and polymer Journal of Micro / Nanolithography, MEMS, and MOEMS 13(1), 013008-013008
91. G. Karthikeyan, J. Ramkumar, S. Dhamodaran 2014 Block EDG: issues and applicability in multiple pass micro ED-milling Machining Science and Technology 18 (1), 120-136
92. K. Pallav, P. Han, J. Ramkumar, K. F. Ehmann 2014 Comparative Assessment of the Laser Induced Plasma Micro machining and the Micro-EDM Processes Journal of Manufacturing Science and Engineering 136 (1), 011001
93. R.K. Porwal, V. Yadava, J. Ramkumar 2014 Modelling and multi-response optimization of hole sinking electrical discharge micro machining of titanium alloy thin sheet Journal of Mechanical Science and Technology 28 (2), 653-661
94. D. Jhodkar, M. Amaranth, H.  Chelladurai, J.  Ramkumar 2014 Experimental Investigations on the Effect of Vegetable Based Cutting Fluid in Turning AISI 1040 Steel Applied Mechanics and Materials 541, 368-373
95. Jefferson, Hari and J. Ramkumar 2014 Micro machining performance and surface quality comparison of using cryogenically treated copper-tungsten tool/AISI 304 work piece in micro EDM milling Recent Patents on Mechanical Engineering.

Reference#: BSP-MENG-2014-56

Machining Science and Technology, (accepted)

96. B. Muralidharan, H. Chelladurai, J. Ramkumar 2015 Experimental Investigation on Electro-Discharge Deposition Process  International Mechanical Engineering Congress and Exposition .Volume 76, Issue 1-4, pp. 69-82.
97. Dharmesh Kumar ; Syed  N. Akhtar ; Anup K. Patel; J. Ramkumar ; Dr. Kantesh Balani 2015 Tribological  Performance of Laser Peened Ti-6Al-4V Journal of Wear, 322, 203-217
98. Syed Nadeem Akhtar, Shashank Sharma, S. Anantha Ramakrishna, and J. Ramkumar 2015 Excimer laser micromachining of oblique microchannels on thin metal films using square laser spot Sadhana Academy Proceedings in Engineering Science, (accepted)
99. Divyansh Patel, V. K. Jain, J. Ramkuma 2015 Surface Texturing for Inducing Hydrophobicity Directions IIT Kanpur Publications, Vol. 15-1, pp. 46-53
100 Divyansh Patel, V. K. Jain, J. Ramkumar 2015 Micro texturing on metallic surfaces: State-of-the-art Proceedings of the Institution of Mechanical Engineers, Part B. (Accepted)
101 Ajay Vardhaman B. S, M. Amarnath, Durwesh Jhodkar, J. Ramkumar, H. Chelladurai, M. K. Roy 2015 Influence of coconut oil on tribological behavior of carbide cutting tool insert during turning operation Journal of Cleaner Production (Under Review)
102 Ajay Vardhaman B. S, M. Amarnath, Durwesh Jhodkar, J. Ramkumar and H. Chelladurai 2015 Examining the Role of Cutting Fluids in Machining AISI 1040 Steel Using Tungsten Carbide Insert under Minimal Quantity Lubrication Condition International Institute of Engineers
103 Amandeep Singha, Deepu Philip , J. Ramkumar 2015 Quantifying green manufacturability of a unit production process using simulation Procedia CIRP 29 ( 2015 ) 257-262
104 Durwesh Jhodkar, H.  chelladurai, M.  Amarnath and J.  Ramkumar 2015 Performance evaluation of Microwave Treated

Cemented Carbide insert on AISI 1040 steel during turning process

Accepted in ASME 2015, Applied mechanics and materials conference.
McMat2015-6318 
105 Syed Nadeem
Akhtar,  Shashank  Sharma, Govind  Dayal, S  Anantha  Ramakrishna and J. Ramkumar
2015 Micro feature edge quality enhancement in
excimer laser micromachining of metal films
by coating with a sacrificial polymer layer
Journal of Micromechanics and Micro engineering
106 Nishith Verma, Prateek Khare, Janakaranjan Ramkumar, 2015 Control of Bacterial Growth in Water using Novel Laser-Ablated Metal-Carbon-Polymer Nanocomposite-based Microchannels Chemical Engineering Journal 276 (2015) 65-74.
107 Bhargava, Neelima; Shanmugaiah, Vellasamy; Balakrishnan, Karuppiah; Ramkumar, Janakarajan; Das, Mainak 2015 Comparing the Adhesion and Survival of Adult Rod and Cone Photoreceptor Neurons on Poly-D-Lysine and Concanavalin-A Substrate Journal of Biomaterials and Tissue Engineering, Volume 5, Number 6, June 2015, pp. 431-438(8).
108 F. Islam, J. Ramkumar & A.S. Milani 2015 A simplified damage prediction framework for milling of unidirectional carbon fiber-reinforced plastics Polymer & Composites Science, 1:4, 175-184, DOI: 10.1080/20550340.2015.1117747.
109 T. V. K. Gupta, J.  Ramkumar , Puneet Tandon , N. S. Vyas 2015 Application of Artificial Neural Networks in Abrasive Water Jet Milling Procedia CIRP 37 ( 2015 ) 225-229.
110 Akhtar, S. N., Sharma, S., Dayal, G., Ramakrishna, S. A., & Ramkumar, J. 2015 Micro feature edge quality enhancement in excimer laser micromachining of metal films by coating with a sacrificial polymer layer Journal of Micromechanics and Microengineering, 25(6), 065001.
110 Akhtar, S. N., Sharma, S., Dayal, G., Ramakrishna, S. A., & Ramkumar, J. 2015 Excimer laser micromachining of oblique micro channels on thin metal films using square laser spot Ref no:- Ms. No.SADH-D- 15-00069R3 (Accepted-Sadhana).
111 F. Islam, J. Ramkumar, A.S. Milani 2015 A Simplified Damage Prediction Framework for Milling of Unidirectional Carbon Fiber Reinforced Plastics Advanced Manufacturing: Polymer & Composites Science (AMPCS) (in press).
112 Rita Maurya, Binit Kumar, S. Ariharan, J. Ramkumar, Kantesh Balani 2016 Effect of carbonaceous reinforcements on the mechanical and tribological properties of friction stir processed Al6061 alloy Materials and Design 98 (2016) 155-166.
113 M. Ravi Sankar, V. K. Jain, J. Ramkumar 2016 Nano-finishing of cylindrical hard steel tubes using rotational abrasive flow finishing (R-AFF) process Int J Adv Manuf Technol DOI 10.1007/s00170-015-8189-5
114 Leeladhar Nagdeve, V. K. Jain, J. Ramkumar 2016 Experimental Investigations into nano-finishing of freeform surfaces using negative replica of the knee joint Procedia CIRP 42 ( 2016 ) 793-798
115 Prateek Khare, Ashish Yadav, Janakranjan Ramkumar, Nishith Verma 2016 Microchannel-embedded metal-carbon-polymer nanocomposite as a novel support for chitosan for efficient removal of hexavalent chromium from water under dynamic conditions Chemical Engineering Journal 293 (2016) 44-54
116 F. Islam, B. Crawford, P. Pal, J. Ramkumar, A.S. Milani 2016 Influence of disbonds on flexural strength and defect detection sensitivity of fiber composites Pending for submission.
117 Amandeep Singh, Deepu Philip , J. Ramkumar 2016 Green Index quantification of a unit manufacturing process through simulation experiments Procedia CIRP 41 1131-1136
118 P Murkute, J Ramkumar, S Choudhary, K Mondal` 2016 Effect of alternate corrosion and wear on the overall degradation of a dual phase and a mild steel Wear 368, 368-378
119 P Murkute, S Choudhary, J Ramkumar, K Mondal 2016 Effect of Exposure Face Orientation and Tilt Angle on Immersion Corrosion Behavior of Dual-Phase and Mild Steels Journal of Materials Engineering and Performance, 1-10
120 P Murkute, J Ramkumar, K Mondal 2016 Stress Corrosion Cracking Behavior of Interstitial Free Steel Via Slow Strain Rate Technique Journal of Materials Engineering and Performance 25 (7), 2878-2888
121 F. Islam, B. Crawford, P. Pal, J. Ramkumar, A.S. Milani 2016 Modelling of nano-finishing forces and surface roughness in abrasive flow finishing process using rheological properties International Journal of Precision Technology 6 (2), 123-141
122 Rao R.V., Rai D.P., Ramkumar J., Balic J. 2016 A new multi-objective Jaya algorithm for optimization of modern machining processes Advances in Production Engineering & Management, Volume 11,Number 4, pp 271-286
123 Yaswanth K. Penke , Ganapathi Anantharaman, Janakarajan Ramkumar, and Kamal K. Kar 2017 Aluminum Substituted Cobalt Ferrite (Co-Al-Fe) Nano Adsorbent for Arsenic Adsorption in Aqueous Systems and Detailed Redox Behavior Study with XPS ACS Appl. Mater. Interfaces,9 (13), 11587-11598
124 Leeladhar Nagdeve, Ajay Sidpara, V. K. Jain & J. Ramkumar 2017 On the effect of relative size of magnetic particles and abrasive particles in MR fluid-based finishing process Machining Science and Technology, 22(3), 493-506
125 Leeladhar Nagdeve, V. K. Jain & J. Ramkumar 2017 Differential finishing of freeform surfaces (Knee Joint) using R-MRAFF process and negative replica of workpiece as afixture Machining Science and Technology, 22(4), 671-695
126 Aakash Tyagi,Vyom Sharma, V. K. Jain & J. Ramkumar 2017 Investigations into side gap in Wire Electrochemical Micromachining (Wire-ECMM) International Journal of Advanced Manufacturing Technology, 94(9-12), 4469-4478
127 G.V.L. Parameswari, V. K. Jain & J. Ramkumar,Leeladhar Nagdeve 2017 Experimental investigations into nano finishing of Ti6Al4V flat disc using Magnetorheological finishing process International Journal of Advanced Manufacturing Technology, 1-11,2017
128 Sahil Kajal, Leeladhar Nagdeve,V. K. Jain & J. Ramkumar 2017 Experimental and theoretical investigations into internal Magnetic Abrasive Finishing of a Revolver Barrel International Journal of Advanced Manufacturing Technology(2017):1-18
129 Harsh Sheokand, Saptarshi Ghosh, Gaganpreet Singh, Mondeep Saikia, Kumar Vaibhav Srivastava, J. Ramkumar, and S. Anantha Ramakrishna 2017 Transparent broadband metamaterial absorber based on resistive films Journal of Applied Physics, 122(10), 105105
130 Harsh Sheokand, Saptarshi Ghosh, Gaganpreet Singh, Mondeep Saikia, Kumar Vaibhav Srivastava, J. Ramkumar, and S. Anantha Ramakrishna 2017 Transparent broadband metamaterial absorber based on resistive films Journal of Applied Physics, 122(10), 105105
131 Abhilasha Singh, Divyansh Singh Patel, J. Ramkumar & Kantesh Balani 2017 Single step laser surface texturing for enhancing contact angle and tribological properties Int J Adv Manuf Technology, (2017):1-15
132 Leeladhar Nagdeve, V. K. Jain and J. Ramkumar 2017 Preliminary investigations into nano-finishing of freeform surface (femoral) using inverse replica fixture The International Journal of Advanced Manufacturing Technology, (2017): 1-12
133 Divyansh Singh Patel, Abhilasha Singh, V. K. Jain, J. Ramkumar & A. Shrivastava 2017 Investigations into insertion force of electrochemically micro-textured hypodermic needles The International Journal of Advanced Manufacturing Technology , (2017): 1-16
134 B.S. Ajay Vardhaman, M. Amarnath, J. Ramkumar, and Prabhat K. Rai 2018 Experimental Investigations to Enhance the Tribological Performance of Engine Oil by Using Nano-Boric Acid and Functionalized Multiwalled Carbon Nanotubes: A Comparative Study to Assess Wear in Bronze Alloy Journal of Materials Engineering and Performance, (2018): 1-14
135 Kiran Kumar Surthi , Bibekananda De, J. Ramkumar , Kamal K. Kar 2018 Enhancement of the surface reactivity of zigzag boron nitride nanoribbons by chlorine gas decoration: A computational study Journal of Physics and Chemistry of Solids, 120, 34-43
136 Ambuj Shah, Arvind Kumar , J. Ramkumar 2018 Analysis of transient thermo-fluidic behavior of melt pool during spot laser welding of 304 stainless-steel Journal of Materials Processing Technology, 256, 109-120
137 Durwesh Jhodkar, M. Amarnath, H. Chelladurai,J.Ramkumar 2018 Experimental investigations to enhance the machining performance of tungsten carbide tool insert using microwave treatment process Journal of the Brazilian Society of Mechanical Sciences and Engineering, 40(4), 200
138 Koshal Kishor, Alhad Parashtekar, Sulay Saha, Sri Sivakumar, Janakarajan Ramkumar and Raj Ganesh S. Pala 2018 Rational Design Strategy for Optimization of Clamping Pressure to Minimize Contact Resistance between Electrode and Current Collector while Preserving Porosity of Electrodes in Water Electrolyzers Canadian Journal of Chemical Engineering,96(4), 881-885
139 Durwesh Jhodkar, H. Chelladurai, Akhilesh Kumar Choudhary & J. Ramkumar 2018 Comparison of machining performance of microwave post-heated WC insert with dry, wet and MQL cutting in turning operation Journal of Microwave Power and Electromagnetic Energy, 52(2), 109-127
140 Amandeep Singh , Deepu Philip , J. Ramkumar , Mainak Das 2018 A simulation based approach to realize green factory from unit green manufacturing processes Journal of Cleaner Production , 182, 67-81
141 Durwesh Jhodkar, M. Amarnath, H. Chelladurai, and J. Ramkumar 2018 Performance assessment of microwave treated WC insert while turning AISI 1040 steel Journal of Mechanical Science and Technology, 32(6), 2551-2558
142 L. Nagdeve, V. K. Jain, J. Ramkumar 2018 Nanofinishing of freeform/sculptured surfaces: state-of-the-art Manufacturing Review,5, 6
143 V Sharma, D.S. Patel, V.K. Jain, J. Ramkumar, A Tyagi 2018 Wire Electrochemical Threading: A Technique for Fabricating Macro/Micro Thread Profiles Journal of The Electrochemical Society, 165(9), E397-E405
144 M. R. Sankar, V. K. Jain, J. Ramkumar, S. K. Sareen, S. Singh 2018 Medium rheological characterization and performance study during rotational abrasive flow finishing (R-AFF) of Al alloy and Al alloy/SiC MMCs The International Journal of Advanced Manufacturing Technology , 1-15
145 Amandeep Singh, Deepu Philip, J.Ramkumar, Mainak Das 2018 A simulation based approach to realize green factory from unit green manufacturing processes Journal of Cleaner Production, 182, 67-81
146 Divyansh Singh Patel, Abhilasha Singh, K. Balani, J. Ramkumar 2018 Topographical effects of laser surface texturing on various time-dependent wetting regimes in Ti6Al4V Surface and Coatings Technology, 2018
147 Pragya Shukla, Shikha Awasthi, Janakarajan Ramkumar, Kantesh Balani 2018 Protective trivalent Cr-based electrochemical coatings for gun barrels Journal of Alloys and Compounds, 768, 1039-1048
148 A. K. Yadav, S. Banerjee, R Kumar, K. K. Kar, J. Ramkumar, K. Dasgupta 2018 Mechanical Analysis of Nickel Particle-Coated Carbon Fiber-Reinforced Epoxy Composites for Advanced Structural Applications ACS Applied Nano Materials,1(8), 4332-4339
149 Hitendra Kumar, J. Ramkumar, K.S. Venkatesh 2018 Surface texture evaluation using 3D reconstruction from images by parametric anisotropic BRDF Measurement,125, 612-633
150 S. Sharma, V. Mandal, S.A. Ramakrishna, J. Ramkumar 2018 Numerical simulation of melt hydrodynamics induced hole blockage in Quasi-CW fiber laser micro-drilling of TiAl6V4 Journal of Materials Processing Technology, 262, 131-148
151 Yaswanth K. Penke, Ganapathi Anantharaman, Janakarajan Ramkumar, Kamal K. Kar 2018 Redox Synergistic Mn-Al-Fe and Cu-Al-Fe Ternary Metal Oxide Nano Adsorbents for Arsenic Remediation with Environmentally Stable As(0) Formation Journal of Hazardous Materials,364, 519-530
152 Durwesh Jhodkar, M. Amarnath, H. Chelladurai, J. Ramkumar 2018 Experimental Investigations to Study the Effects of Microwave Treatment Strategy on Tool Performance in Turning Operation Journal of Materials Engineering and Performance,27(12), 6374-6388
153 Sharma, V., Srivastava, I., Tyagi, A., Jain, V. K., & Ramkumar, J. 2018 Theoretical and Experimental Investigations into Wire Electrochemical Turning (Wire-ECTrg) Process Using Finite Element Method Journal of The Electrochemical Society, 165(14), E773-E783
154 Sheokand, H., Singh, G., Ghosh, S., Ramkumar, J., Ramakrishna, S. A., & Srivastava, K. V. 2019 An Optically Transparent Broadband Microwave Absorber Using Interdigital Capacitance IEEE Antennas and Wireless Propagation Letters, 18(1), 113-117
155 Singh, G., Sheokand, H., Ghosh, S., Srivastava, K. V., Ramkumar, J., & Ramakrishna, S. A. 2019 Excimer laser micromachining of indium tin oxide for fabrication of optically transparent metamaterial absorbers Applied Physics A, 125(1), 23
156 Penke, Y. K., Anantharaman, G., Ramkumar, J., & Kar, K. K 2019 Redox synergistic Mn-Al-Fe and Cu-Al-Fe ternary metal oxide nano adsorbents for arsenic remediation with environmentally stable As (0) formation Journal of hazardous materials, 364, 519-530
157 Penke, Y. K., Tiwari, N., Jha, S., Bhattacharyya, D., Ramkumar, J., & Kar, K. K 2019 Arsenic surface complexation behaviour in aqueous systems onto Al substituted Ni, Co, Mn, and Cu based ferrite nano adsorbents Journal of hazardous materials, 361, 383-393
158 D.S. Patel, V.K. Jain, A Shrivastava, J. Ramkumar 2019 Electrochemical micro texturing on flat and curved surfaces: simulation and experiments The International Journal of Advanced Manufacturing Technology, 100, 1269-1286
159 S. Sharma, V. Mandal, S.A. Ramakrishna, J. Ramkumar 2019 Numerical simulation of melt pool oscillations and protuberance in pulsed laser micro melting of SS304 for surface texturing applications Journal of Manufacturing Processes, 39, 282-294
160 G.B. Shirsath, K. Muralidhar, R.G.S. Pala, J. Ramkumar 2019 Condensation of water vapor underneath an inclined hydrophobic textured surface machined by laser and electric discharge Applied Surface Science
161 G. Singh, H. Sheokand, K. Chaudhary, K.V. Srivastava, J. Ramkumar, 2019 Fabrication of non-wettable wearable textile based metamaterial microwave absorber Journal of Physics D: Applied Physics
162 V. Sharma, I. Srivastava, V.K. Jain, J. Ramkumar 2019 Modelling of Wire Electrochemical Micromachining (Wire-ECMM) process for anode shape prediction using finite element method Electrochimica Acta
163 Mahavir Singh, J. Ramkumar, R. V. Rao, J. Balic 2019 Experimental investigation and multi-objective optimization of micro-wire electrical discharge machining of a titanium alloy using Jaya algorithm Advances in Production Engineering & Management, 14(2), https://doi.org/10.14743/apem2019.2.326
164 Mahavir Singh, Amandeep Singh, J. Ramkumar 2019 Thin-wall micromachining of Ti-6Al-4V using micro-wire electrical discharge machining process Journal of the Brazilian Society of Mechanical Sciences and Engineering, 41:338, https://doi.org/10.1007/s40430-019-1827-3
165 Pragya Tripathi, J. Ramkumar, Kantesh Balani 2019 Laser peening enhances tribological resistance of electrodeposited Cr coatings reinforced with yttria stabilized zirconia and carbon nano tubes Surface & Coatings Technology,Volume 378, 124919, https://doi.org/10.1016/j.surfcoat.2019.124919