Research Projects/Consultancy Assignments Coordinated



 

  1. Development of a Finite Element Method for Viscous Unsteady Flows Using Unstructured Grids,
    December 1995 to September 1999,
    Aeronautical Development Agency.

  2. Computational Studies of Fluid-Structure Interactions Involving Multiple Bodies,
    March 1996 to September 1999,
    Department of Science and Technology.

  3. Setting up of a Nodal CFD Center of Excellence,
    March 1997 to March 1999,
    Aeronautical Research and Development Board.

  4. Optimal Design for a Supersonic Diffuser for Direct Atmospheric Discharge With Minimal Upstream Pressure for an Experimental Gas Dynamic Laser Facility,
    March 1998 to March 1999,
    Defense Science Center, Delhi.

  5. Finite Element Analysis of the Aerodynamics of Ram-Air Parachutes,
    March 1998 to March 2002,
    Aeronautical Research and Development Board.

  6. Optimal Design of the Inlet Cut to Improve Glide-Ratio for Ram-Air Parachutes,
    March 1998 to September 1999,
    Aerial Delivery Research and Development Establishment, Agra.

  7. Computation of Flow Past Multi-Element Airfoils,
    September 1999 to August 2002,
    Aeronautical Research and Development Board.

  8. Parallel Computation of Fluid Flows,
    January 2002 to August 2003,
    Center for Development of Advanced Computing.

  9. Computation of flow past airfoils using a one equation Spalart-Allmaras turbulence model,
    September 2002 to March 2005,
    Aeronautical Research and Development Board.

  10. Optimization studies on Ram-Air Parachutes through CFD Analysis,
    October 2003 to August 2005,
    Aerial Delivery Research and Development Establishment, Agra.

  11. Fluid Structure Interaction of Parachute Systems,
    October 2003 to September 2005,
    Aerial Delivery Research and Development Establishment, Agra.

  12. Investigation of Instabilities in Unsteady Bluff Body Flows,
    November 2003 to November 2008,
    Department of Science and Technology.

  13. Upgradation of the Associate CFD Centre of AR&DB at IIT Kanpur,
    November 2004 to November 2007,
    Aeronautical Research and Development Board.

  14. First Indo-US Frontiers of Engineering Symposium,
    June 2005 to March 2006,
    Indo-US Science and Technology Forum.

  15. Numerical Simulation of Buzz in Supersonic Mixed Compression Air Intakes,
    February 2007 to March 2009,
    Aeronautical Research and Development Board.

  16. Aerodynamic Shape Optimization,
    April 2008 to August 2010,
    Aeronautical Research and Development Board.

  17. Design of Aerodynamic Shape of Cabs of WAP7 Locomotives,
    August 2009 to March 2010,
    Heavy Electro Works Pvt. Ltd. (HEWPL).

  18. Setting up of a Supercomputing Facility at IIT Kanpur.
    November 2009 to November 2012,
    Department of Science and Technology.

  19. Flow Instabilities in Supersonic Mixed Compression Air Intakes.
    November 2010 to March 2013,
    Aeronautical Research and Development Board.

  20. Development of small sized fixed wing Unmanned Aerial System (UAS),
    Jan 2013 to March 2015,
    IIT Kanpur.

  21. Wind Tunnel model study on aeroelastic model of NDCT for 1X700 MW BHEL/KPCL Bellary (Karnataka) TPS unit-3 project,
    March 2013 to March 2014,
    Paharpur cooling towers Limited (Pahar).

  22. Wind Tunnel study on a rigid model of NDCT for 1X500 MW BHEL/DVC Bokaro, Jharkhand,
    March 2013 to March, 2014,
    Paharpur cooling towers Limited (Pahar),

  23. Check of structural design and drawings of the FRP (Fibre reinforced Plastic) shelter of barrel type in snow conditions for 5-6 men.
    March 2013 to May 2015,
    AR Polymers Pvt. Ltd.

  24. Aerodynamic Shape Optimization for Unsteady Flows,
    April 2013 to March 2015,
    Aeronautical Research and Development Board.

  25. Wind tunnel model study for high rise interconnected towers (147m) cluster under stand alone &interfering situations,
    May 2013 to September 2014,
    IREO Group, Gurgaon (IREO).

  26. Wind Tunnel Study of a Pantograph,
    June 2013 to December 2013,
    Schunk Metal & Carbon (India) Private Limited.

  27. Wind Tunnel model study on aeroelastic model of NDCT for 2X500 MW Sarardighi thermal project extension, West Bengal,
    July 2013 to January 2014,
    Paharpur cooling towers Limited (Pahar),

  28. Wind Tunnel Study of Rotafoil Parachutes,
    July 2013 to January 2015,
    Aerial Delivery Research and Development Establishment (ADRDE).

  29. Rustom-II Wind Tunnel model design, fabrication & testing
    July 2013 to June 2015,
    Aeronautical Development Establishment (ADE).

  30. Measurement of Aerodynamic Forces and Moment on 1:24 scaled down model of GNVR Aerostat using Wind Tunnel Testing,
    Sept 2013 to February 2014,
    Aerial Delivery Research and Development Establishment (ADRDE).

  31. Experimental investigation of aerodynamic characteristics of flexible parachutes,
    Sept 2013 to February 2014,
    Aerial Delivery Research and Development Establishment (ADRDE).

  32. Wind Tunnel Test on MK-III Configuration,
    Nov 2013 to April 2014,
    Defence Research and Development Laboratory (DRDL),

  33. Establishment of Mass flow suction facility including noise control,
    Nov 2013 to April 2014,
    Aeronautical Development Agency (ADA).

  34. Wind Tunnel Study of Aerostat,
    Feb 2014 to June 2014,
    Aerial Delivery Research and Development Establishment (ADRDE).

  35. Wind Tunnel study of RLV TD-FADS, Feb 2014 to August 2014, Vikram Sarabhai Space Center (VSSC).

  36. Wind Tunnel study on aeroelastic models of 130m tall RCC chimneys (twin flue) for HMEL,
    March 2014 to March 2015,
    HPCL-MITTAL ENERGY LIMITED (HMEL).

  37. External Aerodynamic Wind Tunnel testing of Karizma ZMR Bike,
    April 2014 to April 2015,
    Hero Motor Corp Ltd. (HERO).

  38. Wind Tunnel tests on PSLV configurations for lift-off studies,
    June 2014 to December 2014,
    Vikram Sarabhai Space Center (VSSC).

  39. Wind Tunnel Study of Ram Air Parachute Airfoil selection and cut section optimization,
    Aug 2014 to April 2015,
    Aerial Delivery Research and Development Establishment (ADRDE).

  40. Wind Tunnel model study of chimney for 2X660MW Suratgarh STPS, Stage V Project,
    Sept 2014 to March 2015,
    Bharat Heavy Electrical Limited (BHEL).

  41. Wind Tunnel study of suspenders of Jubliee Bridge on River Hooghly on Naihati-Bandel section of Eastern Railway,
    Oct 2014 to Oct 2015,
    Eastern Railway Construction Department (ERCD).

  42. Course on Aerodynamics Theoretical Classes for the CFD team,
    Nov 2014 to June 2015,
    Hero Motor Corp Ltd. (HERO).

  43. Wind Tunnel testing of prototype dish antenna,
    Nov 2014 to Nov 2015,
    Kenstel Communications Private Limited Haryana (KCPL).

    Top of the page

    Back to Home