ENERGY CONVERSION LABORATORY
|
Impulse Turbine
- A small-scale hydro power unit designed to demonstrate the. principles of design and operation of a Pelton turbine.
- Equipped with electronic measurement sensors for inlet pressure, rotational speed and break force.
- PC controlled data processing
Specifications:
70mm diameter, 10 buckets rotor
4.5mm diameter nozzle
Adjustable spear valve
|
|
Axial Flow Fan
- Two-stages axial flow fan.
- A test setup to estimation of performance characteristics and effects of yaw angle, axial velocity through the rotor
.
Specifications:
No. of stages : 2
Design R.P.M. : 2400
Design Discharge : 1.7 m3 /s
Design Pressure : 15.0 cm of water
No. of stator blades :37
No. of Rotor blades :24
|
 |
 |
Serial and Parallel Pump
- A small-scale series/parallel centrifugal pump demonstration unit.
- Equipped with electronic measurement sensors for pump differential. pressure, flow rate, temperature and rotational speed
.
- PC controlled data processing via the IFD6 interface console.
|
|
High Speed Centrifugal Compressor
- Sensors for inlet and exit temperature, flow rate, speed and power.
- Evaluation of efficiency and performance characteristics
Speed.: 3600 R.P.M.
|
|
 |
RankineCycler
A steam-electric power plant including components such as a multi-pass boiler, axial - flow steam turbine, AC/DC generator and a condenser tower.
Specification:
- Dimensions: 58 x 48 x 30 inches (148 x 122 x 77 cm)
- Weight: 400 lbs (182kg)
Instrumentation:
- Digital: High Speed Data Acquisition System
- 20 Analog IN - 16 Digital IN/OUT - 4 Frequency/Pulse IN
Operating Conditions:
- Boiler: Pressure 120 psi (827 kPa), Temperature 482˚ F (250˚ C)
- Generator: 15.0 Volts, 1.0 Amp (Total Load of 15.0 Watts)
- Fuel: Liquid Petroleum
|
