Research Guidance

 

Home

Education

Experience

Memberships

Research

Thesis Supervision

Patents

Publications

Invited Lectures

Awards/Honours

Labpage

 

 

 

 

PhD Thesis Supervision

 

Completed

  1. Dinesh Kumar Roshan, Aerospace Engineering, IIT Kanpur, “Understanding and Suppression of Hooting in Gas Turbine Combustors, 2020.

  2. Keerthi M. C., Aerospace Engineering, IIT Kanpur, “Unsteady Aerodynamics of Axial Compressor Cascades undergoing Controlled Oscillations”, 2018.

  3. Vivek Pandey, Aerospace Engineering, IIT Kanpur, “Numerical and Experimental Studies of Gas Turbine Combustion”, 2017.

  4. Sumer Dirbude, Mechanical Engineering, IIT Kanpur, “Numerical Modeling of Spray Vaporization for Non-premixed Flames” , 2016.

  5. N. P. Yadav, Aerospace Engineering, IIT Kanpur, “Combustion in Re-circulating Turbulent Flow Fields”, 2011.

  6. Rakesh Yadav, Mechanical Engineering, IIT Kanpur, “Numerical Investigation of Applicability of DQMOM-IEM method in Gaseous Non-premixed Turbulent Combustion modeling”, Principle Supervisor Dr. V. Eswaran, 2011.

  7. G. G. Dutta, Dept. of Aerospace Engineering, IIT Kanpur, “Parameter Estimation from Radar-tracked Flight Data”, Principal supervisor Dr. A. K. Ghosh, 2010.

  8. Suresh Lal, Dept. of Mechanical Engg., DEC, “Fire Suppression using Water Mist”, Co-supervisor Dr. S. Maji, 2011.

 

M. Tech Thesis Supervision

 

Completed:

  1. “Methane-Air Combustion Studies in Uni-Element Rocket Engine”, Praful Kumar, 2019.

  2. “Numerical Investigation of JHC Flames using Multi-FGM Approach, Amit Kumar, 2019.

  3. “Fluidic Thrust Vectoring in Shallow Single Serpentine Nozzle with Aft Deck”, Kundan Jaiswal, 2019.

  4. “Prediction of Post Detonation Evolution of Flow Parameters for Non-Ideal Explosive”, Gaurav Seth, 2019.

  5. “Design, Fabrication and Experimental Investigation of Pulse Combustor Based Biomass Gasifier”, Ritesh Kumar Maurya, 2019.

  6. “Computational Determination of Detonation Characteristics of Condensed Explosives”, Thiruvickraman J, 2018.

  7. “Investigation of Stagnation Point Reverse Flow Slinger Combustor”, Pooja Neema, 2018.

  8. “Numerical Analysis of Infrared Signature from the Aircraft Plume for Various Nozzle Configuration”, Boomadevi S, 2018.

  9. “Study of emissions in an atmospheric pressure gas turbine combustor rig”, Parneeth Lokini, 2018.

  10. “Investigation of Reverse Flow Slinger Combustor”, Abhishek Dubey, 2017.

  11. “Gaseous Combustion (LPG/ GCH4/Air) Studies in High Pressure Rocket Combustors”, Tribhuwan Prasad Singh, 2017.

  12. “Spray Characterization from a Twin-Fluid Atomizer with Internal Impactor”, Imran Rasheed, 2017.

  13. “Numerical Study of Effect of Blade Motion on Compressor Blades in a Cascade”, Shubham, 2016.

  14. “Film Cooling Effectiveness for Equilibrium Reacting Flow”, Pramin Pradeep, 2016.

  15. “Design and Experimental Study of Single Stage Axial Compressor”, Prakash Chouhan, 2016.

  16. “Characterization and analysis of self-sustainable mini gas turbine engine”, Arjun Chouhan, 2015.

  17. “Effect of Leading-Edge Turbercles on Compressor Cascade Performance with Varying Stagger Angle”, Madhabendra Pradhan, 2015.

  18. “Flow Characterization and Fluidic Thrust Vectoring in Yaw Direction for a Shallow Single Serpentine Nozzle with Aft Deck”, Wing Commander P. Rajkumar, 2015.

  19. “Comparative Study of Dump Combustor with Non-Circular Inlets”, Kiran Raj Goud B, 2015.

  20. “Image Processing and Analysis of Liquid Jet in Cross Flow of Air”, Sushant Mehrotra, 2015.

  21. “Experimental Analysis of Thrust and Pressure Characteristics of a Pulse Combustor”, Aditya Sai C, 2014.

  22. “Primary Breakup of Liquid Jet in an Annular Passage in Cross-Flow of Air”, Deepak Kumar, 2014.

  23. “Experimental Investigation of Leading Edge Serrations in Compressor Cascades”, M. S. Rajeshwaran, 2014.

  24. “Study of Fluidic Thrust Vectoring in a 3D Nozzle”, T. Chandrasekar, 2014.

  25. “Design and Fabrication of a self-sustainable mini gas turbine engine”, Anirudh Gupta, 2014.

  26. “Combustion instabilities in Gas Turbine Combustors”, B. Ramanasrinibas, 2013.

  27. “Liquid jet breakup in swirling cross flow of air”, Tushar Sikroria, 2013.

  28. “Study in 2-D nozzle”, Arun Rajput, 2013.

  29. “Effects of Leading-Edge Tubercles on Compressor Cascade Performance”, Arun Kumar, 2013.

  30. “Design and Development of an Annular Cascade Tunnel”, Manoj Kumar K D, 2012.

  31. “An experimental study of partially premixed combustion”, Surbhi, 2012.

  32. “Detailed characterization of a S-duct diffuser”, Mitul Kumar Sonkar, 2012.

  33. “Control of flow separation in a S-duct diffuser”, Rahul Kumar Singh, 2012.

  34. “Effect of Swirling External Air Flow on Spray Properties”, Sandeep C. S., 2011.

  35. “Hybrid modeling and control of axial compressor surge”, S. M. Ananth, 2011.

  36. “Effectiveness of Vortex Generator Jets and Wall Suction in Serpentine-duct Diffuser”, Keerthi M. C. 2011.

  37. “Control of Combustion Driven Oscillations in Bluff-body stabilized Nonpremixed Combustor”, S. R. Sarangi, 2011.

  38. “Analysis of a Subsonic Expansion Jet under the Influence of a Finite Wall at the Exit”, Vaivab Shukla, 2011.

  39. “Numerical investigation of diffusion flame stabilized by a cone”, Ankit Kumar Singh, 2011.

  40. “Study of fluidic thrust vectoring of a 2D nozzle flow”, Smreeti Dahariya, 2010.

  41. “Combustion Oscillations in Cone Stabilized Confined Diffusion Flames”, Tapish Agarwal, 2009.

  42. “Water Mist as Fire Suppressant: Numerical and Experimental Study”, Jag Parvesh, 2009.

  43. “Identification of Precursor and Active Control of Surge in Axial Flow Compressor’, Shekhar Sahu, 2009.

  44. “Controlling the Curved Accelerating Flows using Open-loop Fluidic Control Mechanism”, Masutge Sunny Nabhiraj, 2009.

  45. “Numerical Simulation of Flow through Serpentine Duct with and without Controls”, Neeraj Tripathi, 2009.

  46. “Effectiveness of a Serpentine Inlet Duct Control Scheme”, Sushant Chandra, 2008.

  47. “Aerodynamics of Projectile with Wrap around Fins”, G. Vasanth Kumar, 2008.

  48. “Experimental Investigation of the Forced Response of a Cascade Blade subjected to Transverse Periodic Aerodynamic Loading”, K. Naresh Babu, 2008.

  49. “Dynamics of Accelerated Curved Flows”, Ajay Vikram Singh, 2008.

  50. “Formulation and Solution of Coupled Bending Torsion Flutter in Turbo-machinery Blades”, Harsh Pathak, 2007.

  51. “The effect of inlet isentropic disturbances on bluff body stabilized combustion”, M. Madanmohan, 2007.

  52. “Numerical Study of Fire Extinguishment in an enclosure”, Praveena, Ch Bala Pavanaja, 2007.

  53. “Parametric investigation of a low aspect ratio dump combustor”, R. Sailaja, 2007.

  54. “Study of Spray through an Internally Mixed Twin-Fluid Swirl Atomizer”, Jaideep Karnawat, 2006.

  55. “Development and Characterization of Pulsed Plasma Thrusters without Igniter Plug”, A. Srikanth, 2006.

  56. “Aerodynamic study of missile with wrap around fins”, Vikas Tayal, 2005.

  57. “Vibration induced perturbations in flow through closed conduits”, Kumaresh Bagchi, 2005.

  58. “Flow Dynamics inside a low aspect ratio dump combustor with tapered exit”, Srinibas Karmakar, 2005.

  59. “Development and Characterization of Helical Passage Pressure Swirl Atomizer”, Palash Barman, 2003.