Text Box: Journals  (International / National )

                                                            
                   
  1. Nidhi Singh, Gouthama and Vakil Singh
    Low cycle fatigue behaviour of Ti alloy Timetal 834 at 873 K
    International Journal of Fatigue, Volume 29, Issue 5, May 2007, Pages 843-851
     
  2. S. Sankaran, Gouthama, S. Sangal and K. A. Padmanabhan
    Transmission Electron Microscopy Studies of  Thermomechanically Control  Processed Multiphase Medium -Carbon Microalloyed Steel
    Low-Cycle Fatigued Microstructure
    Metallurgical & Materials Transactions A, 37 A ( 2006)  3259
     
  3. S. Sankaran, G. Malakondaiah, Gouthama, S. Sangal and K. A. Padmanabhan
    Static and Dynamic Fracture Toughness of a Medium Carbon Microalloyed Steel of Three Different Microstructures
    Metallurgical & Materials Transactions A, 37 A ( 2006)  1191
     
  4. G. Gouthama, R. Balasubramaniam, D. Wang and T.B. Flanagan
    Transmission electron microscopy of hydrogen effects in internally oxidized palladium–chromium alloys 
    Journal of Alloys and Compounds 404-406 (2005)  617-620
                       
  5. S.Sankaran, Gouthama, Sandeep Sangal and K.A. Padmanabhan
    Microstructural changes accompanying high strain amplitude fatigue tests on a multiphase medium carbon microalloyed steel
    J    ournal of Materials Science, 40 (2005) 499-502
     
  6. Gouthama and K. A. Padmanabhan
    Transmission electron microscopic evidence for cavity nucleation during superplastic flow 
    Scripta Materialia,  49 (2003) 761-766
     
  7. S. Sankaran, V. Subramanya Sarma, Gouthama, S. Sangal and K. A. Padmanabhan
    Low cycle fatigue behaviour of a multiphase medium carbon microalloyed steel processed through rolling 
    Scripta Materialia, 49 (2003) 503-508
                         
  8. Gouthama and R. Balasubramaniam
    Alloy Design of Ductile Phosphoric Iron: Ideas from Archaeometallurgy
    Bulletin of Materials Science, 26 (2003) 483-492
     
  9. Nidhi Singh, Gouthama and Vakil Singh
    Low cycle fatigue behavior of Ti alloy IMI 834 at room temperature 
    Materials Science and Engineering A,  325 (2002) 324-332
     
  10. Gouthama and K.A. Padmanabhan
    Prospects and Problems of using TEM in analyzing cavitation during superplastic deformation
     EMSI Bulletin, 3 (2002) 12-18
     
  11. Gouthama
    Basic concepts in the study of interfaces
    T    he Banaras Metallurgist, 14&15 (1997) 198-207
     
  12. G.M.K. Sarma and Gouthama
     Image analysis and its applications
    The Banaras Metallurgist, 12 & 13 (1993) 51
     
  13. Gouthama, G. N. Subbanna and Kishore
    TEM studies on the precipitate morphologies in quenched and aged Al-2wt%Ge alloy
    Mater. Sci. forum, 3 (1985) 261
     
  14. Gouthama and Kishore
    Di-isothermal aging of an Al-Mg-Si alloy: Effect of Sn addition on clustering kinectics
    Trans. Indian Inst. Metals, 36 (1983) 283
     
  15. Gouthama and Kishore
    Electron microscopic studies on the effect of Sn addition on the aging characteristics of Al-0.7wt%Mg2Si
    Bull. Mater Sci., 5 (1983) 61
     
  16. G.M.K. Sarma and Gouthama
     Image analysis and its applications
    The Banaras Metallurgist, 12 & 13 (1993) 51
     
 
                                                          
Text Box: Proceedings  (International / National )
                                                                          
             Text Box: Conferences & Seminars  (International / National )
  1. S.N. Ojha, R.K. Mandal and  Gouthama
    Synthesis of Nano-composites by spray deposition processing of Liquid Immisicible systems
    Proc. Int. Conf. On Novel Techniques in Synthesis and Processing of advanced materials, TMS/ASM, Rosemont, Illinois, October, 1994.
     
  2. S. Samajdar, Gouthama and S.K. Samanta
    Studies on microstructure-property relationship of Yba2Cu3O7-x + Ag2O composite wire
    Proc. MRS Symposium on High Temperature Superconductors: Fundamental properties and Novel Materials Processing, 169 (1990) 1275               
  3. Gouthama and S.K. Samanta
    Electron microscopic studies of interfaces in Yba2Cu3O7-x + Ag2O wire samples
         Proc.  7th CIMTEC- World Ceramic Congress on High Temperature Superconductors, Trieste, Italy, 1990.
     
  4. Gouthama and Kishore
    Crystallography and interfacial structure of rods, laths and plate shaped Ge precitates in an Al-2wt%Ge alloy
    Proc. on Phase Transformation’87, Ed. G. W. Lorimer, Institute of Metals, London, 1988, p139
 
 
                                                                               
 
              
  1. Gouthama, G. N. Subbanna and Kishore
    TEM studies on influence of quenching rate on the precipitation in Al-2wt%Ge alloy
    XV EMSI Annual Conference, Varanasi, 1982.
     
  2. Gouthama and Kishore
    Lattice imaging studies on the Ge:Al interphase interface in an Al-Ge alloy
         8th Anniversary symposium of the Sophisticated Instrument Facility, Bangalore, 1985.
     
  3. Gouthama
    CTEM and HREM studies of precipitate(Ge):matrix interface in an Al-Ge alloy
    Symposium on Metallurgical Research, Bangalore, 1987
     
  4. Gouthama
    Occurrence and significance of bain orientation relationship in an Al-Ge alloy
    Symposium on Metallurgical Research, Bangalore, 1987
     
  5. Gouthama
    Interfacial symmetry and morphology of enclosed second phase particles
    National symposium on Interface and Surface and Phenomena in Metallurgy, Banaras Hindu University, Varanasi, 1993
     
  6. Gouthama and S.N. Ojha
    Microstructual evolution in Cu-Pb Alloys produced by spray atomization and deposition processing
    5th Annual meeting of the MRSI, Hyderabad, 1994
     
  7. Gouthama
    Analysis of electron diffraction patterns and image contrast
    ISTE Summer School-94 on Science and Technology of Advanced Materials, Department of Metallurgical Engineering, Banaras Hindu University, Varanasi, July, 1994
  8. Gouthama and G.V.S. Sastry
    Interfacial structure and transformation characteristics of irrational twins,
    International Conference on Physical Metallurgy, Bhabha Atomic Research Centre, Bombay, 1994
     
  9. Gouthama
    An atomistic model and TEM study on germanium precipitate nucleation in Al-Ge system
    Indo-US workshop on Nucleation and Growth in Solids, Indian Institute of Science, Bangalore, 1994
     
  10. Gouthama
    Analysis of interfacial structures
    Workshop on Crystallographic techniques in Electron Microscopy (CTEM-96), Institute of Technology, Banaras Hindu University, February 12-15, 1996
     
  11. Gouthama
    TEM  techniques in the study of heterogeneous catalysts
    Short Term Intensive Course on Design Evaluation and Characterisation of Heterogeneous Catalysts, Institute of Technology, Department of Chemical Engineering, Banaras Hindu University, Varanasi, May 17-29, 1999
     
  12. N.C. Santhi Srinivas, Gouthama, G.V.Sastry and V.V. Kutumbarao
    Discontinuous precipitation in high-nitrogen austentic stainless steels,
    ATM-99, Indian Institute of Metals, Kanpur, 13-16, November 1999
     
  13. Gouthama, Prashant Shukla, A.A. Pallavi, A. Dwivedi and S.N. Ojha,
    Spray deposition processing of 7075 aluminium alloy,
    MRSI Annual Technical Meeting, Baroda, February, 2000
     
  14. Gouthama and K.A. Padmanabhan
    Role of special boundaries in grain boundary sliding and rotation during superplastic deformation of metallic materials
    International conf. PMMA, Bangalore, July 2001
     
  15. Gouthama and K.A. Padmanabhan
    Prospects and problems of using TEM in analyzing cavitation during superplastic deformation
    EMSI-2002, I.I.T., Bombay, February, 2002
     
  16. N.C. Santhi Srinivas, Gouthama, G.V.Sastry and V.V. Kutumbarao
    Microstructural evolution in high-nitrogen austentic stainless steels,
    I    nternational conf. on Nitrogen Steels, IGCAR, Kalpakam, 20-22, February, 2002
     
  17. *Gouthama, R.K. Ray and K.A. Padmanabhan
    TEM Study of the Role of Precipitate Particles in a Quasi-Single Phase Superplastic Alloy,
    EMSI-2003, CPRI, Shimla, April, 2003
     
    This Paper won the ‘Best Oral Presentation Award’ for the Materials Science Category at the conference from amongst 70 oral presentations..
  18. Malladi V Pavan Kumar, Gouthama, Deepak Kunzru
    Study of Carbon Nanotubes Prepared by Chemical Vapor Deposition Using Transmission Electron Microscopy
    EMSI-2003, CPRI, Shimla, April, 2003
     
  19. R. Balasubramaniam, Gouthama and P. Dillmann
    Microstructural Characterization of  Ancient Indian Iron
    EMSI-2003, CPRI, Shimla, April, 2003
     
  20. A. Upadhyaya, Gouthama and P.P. Bhattacharya
    TEM Studies on the Matrix Structure Refinement in Thermo-Mechanically Treated Tungsten Heavy Alloys
    EMSI-2003, CPRI, Shimla, April, 2003
     
  21. S. Giribaskar, Gouthama and R. Prasad
    Nanostructured Materials by Severe Plastic Deformation
    MRSI-2004, BHU, Varanasi, February, 2004
     
  22. S.Sankaran, Gouthama, Sandeep Sangal and K.A. Padmanabhan
    TEM evidense for microstructural modifications during fatigue loading at high strain amplitude in a multiphase medium Carbon
    microalloyed steel
    EMSI-2004, NPL, New Delhi, April, 2004
     
  23. G.K. Mandal, Gouthama and R. Balasubramaniam
    Study of Precipitation Characteristics of 6063 Aluminium alloy using TEM
    EMSI-2004, NPL, New Delhi, April, 2004
     
  24. Gouthama
    Grain Boundary Character and Superplasticity: a TEM study
    EMSI-2004, NPL, New Delhi, April, 2004
     
  25. Gouthama and S.C. Barthwal
    High precision dimensional measurements using tilting holder in TEM: Interlamellar spacing in Pearlite
    EMSI-2004, NPL, New Delhi, April, 2004
     
  26. S. Giribaskar, Gouthama and R. Prasad
    Microstuctural evolution by severe plastic deformation
    EMSI-2004, NPL, New Delhi, April, 2004
  27. Gouthama, R. Balasubramaniam and Ted B. Flanagan
    Transmission Electron Microscopic Study of Hydrogen Effects in Internally Oxidized Palladium-Chromium Alloys
    EMSI-2004, NPL, New Delhi, April, 2004
     
  28. Gouthama and J. Bhagyaraj
    Microstructural Study of Detonation Spray Coated Alumina on Steel
    International Conf. on Design and Characterisation of Advanced Materials, Varanasi, December 2004
  29. Gouthama and R. K. Srivatsava
    Role of Grain Boundary Character on Superplastic Flow and Failure
    International Conf. on Design and Characterisation of Advanced Materials, Varanasi, December 2004
     
  30. J. Bhagyaraj, Gouthama, Senthil Kumar and S.N.Ojha
    A TEM Study of Ultrafine Grained Al Alloy Obtained by SDP - SPD
    National Conf. on Science and Technology of Advanced Materials-05,  Pondicherry, July 2005
     
  31. Sivaswamy Giribaskar, Gouthama, J.Ramkumar and Rajesh Prasad
    Ultra-fine grained Metallic Materials by Severe Plastic Deformation
    International Conference on Recent Advances in Materials and  Processing (RAMP-2006), PSG College of Technology, Coimbatore, December, 2006

     
 
                                                                           
Text Box: Publications
 
Dr.Gouthama
Department Materials and Metallurgical Engineering
Indian Institute of Technology Kanpur
Kanpur - 208016.
Uttar Pradesh
India.

                                      ProfileExperienceResearchTeachingStudentsHomeDepartmentIITK