- Crystal structure of saturated mixed hydrides of Ti and Nb. G.S. Upadhyaya,
A.D. McQuillan. Trans. AIME, Vol-224, 1962, p.1290.
- Lattice parameter study of Ti-Mo, Nb-Mo alloys. G.S. Upadhyaya.Trans.
IIM, March, 1967, p.53.
- Properties of alloys of Nb and Ti carbides in their homogeneity range.G.V.
Samsonov, G.S. Upadhyaya.
Poroshkovaya Met., No. 9, Vol-70, 1968 (in Russian). Soviet Powder Met.
and Metal Ceramics, Plenum Press, New York (English trans.).
- Some physical properties of alloys of Nb- and Ti- carbides in homogeneity
range.G.S. Upadhyaya.Proceedings of conference of research scholars,
Institute of Materials Science, Kiev, 1968, p.133 (in Russian).
- Some relationships of constitutional diagrams of III - VI transition
metals.G.S. Upadhyaya, G.V. Samsonov. J. Less common metals, Vol-17,
1969, p.161.
- Some electrophysical properties of alloys of Nb and Ti carbides in
homogeneity range. G.V. Samsonov, G.S. Upadhyaya. High Temperature Materials,
6th International Plansee seminar, Austria, 1969, p.652.
- Physical properties of monocarbides of transition metals in homogeneity
range.G.V. Samsonov, G.S. Upadhyaya. Porosh. Met., No. 5, Vol-6, 1969
(in Russian, trans. in English).
- Physical properties of alloy carbides of transition metals.G.V. Samsonov,
G.S. Upadhyaya. Dop. AN Ukr. SSR, Ser. A, No. 3, 1969, p.250 (in Ukr).
- Constitutional diagrams of transition metals.G.S. Upadhyaya, G.V.
Samsonov.Izv. Vyz., Tsvet. Met., No. 3, 1969, p. 114.
- Temperature dependence of electrical resistivity and thermo e.m.f.
of alloy carbides of transition metals. G.V. Samsonov, G.S. Upadhyaya.
Teplofizika Visoko Tem., Vol-7, 1969, p.449.
- Microhardness of alloy carbides of Nb and Ti. G.S. Upadhyaya, G.V.
Samsonov. Vestnic Kiev Tech. Institute, No. 6, 1969, p.161.
- Stacking faults in crystals and stable electronic configurations model.
G.S. Upadhyaya. Izv. Vyz. Fizika., No. 8, 1969, p.38.
- Emissivity of monocarbides of titanium, niobium and their alloys in
homogeneity range. L.N. Okhremchuk, I.A. Podchernyaeva, G.S. Upadhyaya,
V.S. Fomenko. Izv. Vuzov Fizika, No. 11, 1969, p.126 (in Russian).
- Work functions of Ti and Nb carbide in homogeneity range. G.V. Samsonov,
L.N. Okhremchuk, G.S. Upadhyaya, V.Ya. Naumenko. Teplo-Fizika Visok.
Temperature, No. 4, 1970, p.921(in Russian).
- Temperature dependence of hardness of titanium carbide in homogeneity
range. G.V. Samsonov, M.S. Kovalchenko, V.V. Dzemelinskii, G.S. Upadhyaya.
Physica Status Solidi (1), Vol-1, 1970, p.327.
- Wetting of carbides of Ti, Nb, and their alloys by liquid copper.
G.V. Samsonov, G.S. Upadhyaya, G.K. Kozina. Fiziko-Mekh. Mater., No.
4, Vol-6, 1970, p.106 (in Russian).
- Electro-erosion resistance of refractory carbides in homogeneity range.
A.M. Lemeshko, V.Ya. Naumenko, G.S. Upadhyaya. Electro-Obrabotka Mater.,
No. 4, 1970, p.6 (in Russian).
- Stacking faults in crystals and stable electronic configuration model.
G.V. Samsonov, G.S. Upadhyaya.
Proceedings of the 2nd International Conference on the Strength of Metals
and Alloys, Asilomar, ASM, Vol-I, 1970, p.373.
- Electronic nature and material cutting. G.S. Upadhyaya. Annual number,
The Institution of Engineers (India), Roorkee Sub-Centre, 1970, p.23.
- Equilibrium diagrams of Rare earth Metals. G.S. Upadhyaya. Rare Earth
Metals and their Compounds, Naukova Dumka, Kiev, 1970, p.57 (in Russian).
- Self diffusion data and stable electronic configuration model. G.S.
Upadhyaya. Metallurgical Transactions AIME, April, 1971, p.912.
- An electronic approach to sintering. G.S. Upadhyaya. Paper at the
Symposium on 'Powders and Sintered Products', Department of Atomic Energy,
Bombay, Feb-1971.
- Physical properties of monocarbides of Nb and their alloys in homogeneity
range. G.S. Upadhyaya, G.V. Samsonov. Modern Developments in Powder
Metallurgy, Vol-5, Plenum Press, New York, 1971, p.235.
- Properties of alloys of ZrC and NbC. G.V. Samsonov, G.S. Upadhyaya.
Poroshkovaya Met., No. 2, 1971, p.85.
- Properties of ZrC in its homogeneity range. G.V. Samsonov, G.S. Upadhyaya.
Neorgani, Materiali, Vol-7, 1971, p.1351.
- Heterogeneous diffusion in alloys and stable electronic configuration
model. G.S. Upadhyaya. Scripta Metallurgica, Vol-5, No. 12, 1971, p.1125.
- Stable electronic configuration model and its role in metallurgy.
G.S. Upadhyaya. Trans. IIM, Vol-24, No. 4, 1971, p.48.
- Electronic mechanism of basic technological processes in powder metallurgy
of high temperature materials.
G.V. Samsonov, G.S. Upadhyaya. Planseeber, fur Pulvevment, Vol-20, 1972,
p.269; also in High Temperatures - High Pressures, Vol-3, 1971, p.635.
- Steel plant for vacuum treatment. G.S. Upadhyaya. Indian Steel Age,
Jan-1972.
- Mechanical behaviour of refractory carbides. G.S. Upadhyaya. Proceedings
of the Symposium on 'High Temperature Materials', DAE, Bombay, Feb.
1972, p.17.
- Emissivity of zirconium and niobium carbides in the region of homogeneity.
L.N. Okhremchuk, G.S. Upadhyaya. (Translated from Russian in 'Technology
of Producing New Materials, Report JPRS - 59873, Department of Commerce,
USA).
- Thermomechanical treatment of 18, 19, 25% Ni maraging steels. M.Lal,
G.S. Upadhyaya. Trans. Indian Institute of Metals, Vol-26, No. 4, 1973,
p.37.
- Activated sintering of Al-bronze. G.S. Upadhyaya, P.S. Misra, S.S.
Singh. Proceeding of 3rd International Round Table Meeting on Sintering,
Herceg Novi, Yugoslavia, 3-8 Sept., 1973 (Ed. M.M. Ristic), The Boris
Kidric Institute of Nuclear Sciences, Beograd, p.227.
- Annealing behaviour of cold worked aluminium dispersed with refractory
carbides. P.S. Misra, G.S. Upadhyaya. Poroshkovaya Metallurgica, September,
1974.
- Properties of P/M parts dispersed with refractory carbides. G.S. Upadhyaya,
P.S. Misra. Proceedings of IV International Conference on Powder Metallurgy,
High Tatras, Czechoslovakia, Oct. 1974, Vol-II, p.189.
- Stable electronic configuration model and properties of rare earth
metals and their compounds. G.S. Upadhyaya. Proceedings of 11th Rare
Earth Research Conference, Traverse City, USA, Oct.1974.
- Scope of powder metallurgy in cutting tool industry. G.S. Upadhyaya.
Trans. Powder Metallurgy Association of India, Vol-1, 1974, p.31.
- Nature of Constitutional Diagrams of some Transition Metal Boride
Systems. G.S. Upadhyaya. Bor-poluchenic, Structura i Svoistva, Mitsniereba,
Tbilisi, 1974, p.115.
- Prospect of sponge titanium production in India - A technological
study. G.S. Upadhyaya. J. of Mines, Metals and Fuels, August, 1975,
p.237.
- Properties of sintered aluminium dispersed with TiC and WC. P.S. Misra,
G.S. Upadhyaya. Int. Journ. of Powder Metallurgy and Powder Technology,
Vol-11, No. 4, 1975, p.120.
- Preparation and properties of Al-carbide particulate composites. G.S.
Upadhyaya, P.S. Misra. Proceedings of IV European Symposium for Powder
Metallurgy, May, 1975, Grenoble.
- Activated sintering of Al-Cu alloys with boron addition. G.S. Upadhyaya,
P.V. Thareja. Proceedings of IV International Powder Metallurgy conference,
Zakopane, Poland, 7-9 Oct. 1975, Vol-II, p.101 (also in Trans. PMAI,
Vol-2, 1975, p.22).
- Sintering of Ni-Cu-Mo-Cr low alloy steels. J.P. Tewari, G.S. Upadhyaya.
Trans. Powder Met. Assoc. of India, Vol-2, 1975, p.32.
- Powder metallurgy of RCo5- permanent magnets - A review. G.S. Upadhyaya.
News Letter, PMAI, Vol-I, No. 1, 1975.
- Status of powder metallurgy in India. G.S. Upadhyaya. Powder Metallurgy
International, No. 4, 1975, p.197.
- Refractory carbides in high temperature high strength alloys. G.S.
Upadhyaya. Rev. on High Temperature Materials, Vol-III, No. 1, 1975,
p.25-50.
- Sintering of low alloy steels. G.S. Upadhyaya, J.P. Tewari. Tool &
Alloy Steels, Vol-10, No. 2, 1976, p.65.
- Production of metal powders by gaseous reduction from solution. R.D.
Agrawal, G.S. Upadhyaya. J. of Inst. of Engrs (India), Vol-51, MM No.
2, Nov. 1976, p.50.
- Energy conservation in P/M industry. G.S. Upadhyaya. News Letter,
Powder Metallurgy Association of India, Vol-2, No. 3, June, 1976, p.11.
- Activated sintering of Al under thermal cycling. P.S. Misra, G.S.
Upadhyaya. Powder Met. Int., Vol-8, No. 4, 1976, p.165.
- Sintering of low alloy steels with varying Cu and Sn additions. J.P.
Tewari, G.S. Upadhyaya. Trans. PMAI, Vol-3, 1976, p.26.
- Potentiality of P/M forging of Al and Al - 3Cu alloy. P.N. Garg, G.S.
Upadhyaya. Trans. PMAI, Vol-3, 1976, p.33.
- Sintering behaviour of Ni-Cu-Mo low alloy steels. J.P. Tewari, G.S.
Upadhyaya. Trans. IIM, Vol-3, No. 6, Oct. 1977, 345.
- The challenge of P/M education. G.S. Upadhyaya. Int. J. of P/M and
Powder Technology, Vol-13, No. 3, 1977, p.227.
- Critical evaluation of sintered products. G.S. Upadhyaya. ISI Bulletin,
Vol-29, No. 10, 1977, 354.
- Samsonov's contribution in Science of Refractory Carbides. G.S. Upadhyaya.
Science of Sintering, Vol-9, No. 1, 1977, p.105-120.
- Effect of Ni and Mn addition on sintering of tin bronze. Chandra,
G.S. Upadhyaya. Trans. of PMAI, Vol-4, 1977, p.46.
- Sintering of aluminium refractory carbides dispersed systems. G.S.
Upadhyaya, P.S. Misra. Science of Sintering, Special issue, Vol. 10,
1978, p.157-174.
- Powder from swarf and their applications. G.S. Upadhyaya. PMAI News
Letter, Vol-4, No. 4, Sept. 1978.
- Effect of iron and cobalt addition on densification of Cu-7Al premix.
S.K. Singhal, G.S. Upadhyaya. Trans. PMAI, Vol-5, 1978, p.68-72.
- Present status of coated carbides. G.S. Upadhyaya. In 'Tungsten and
its Technology', (Ed. N.T. George), PMAI, Hyderabad, 1978, p.47.
- An electronic approach to wear mechanism. G.S. Upadhyaya. Proceedings
of National Conference of Industrial Tribology, 7-9th March, 1979, Dehradun,
p.217-224.
- Effect of repeated thermal cycling on densification of 4600 sintered
steels. U. Gangopadhyay, G.S. Upadhyaya, M.L. Vaidya. Proceedings of
the Symposium on Sintering and Sintered Products, BARC, Bombay, Oct.
1979, p.489.
- Effect of Ni on the sintering of phosphorus containing iron. Md. Hamiuddin,
G.S. Upadhyaya. ibid, p.537.
- Strength differential effect in sintered lead based particulate composites.
P.B. Kadam, G.S. Murty, G.S. Upadhyaya, M.L. Vaidya. ibid, p.545.
- Preparation and characteristics of lead base P/M composites. P.B.
Kadam, G.S. Murty, G.S. Upadhyaya, M.L. Vaidya. Trans. PMAI, vol-6,
1979, p.7.
- Effect of copper on sintering of phosphorus containing iron. M. Hamiuddin,
G.S. Upadhyaya. Trans. PMAI, Vol-6, 1979, p.57.
- Investigations on sintered Al-carbide composites impregnated with
lubricants. K. Gopinath, G.S. Upadhyaya. Proceedings of the National
conference on Aluminium Metallurgy, Bangalore, 5-7 Oct. 1979, p.293-297.
- Effect of transition metal carbides master alloy MCM on sintering
of iron and Fe - P powder premix. M. Hamiuddin, G.S. Upadhyaya. Powder
Metallurgy International, Vol-12, No. 2, May, 1980, p.65.
- Effect of nickel on sintering of P containing iron. M. Hamiuddin,
G.S. Upadhyaya. Int. J. of Powder Metallurgy and Powder Tech., No. 1,
1980, p.57-67.
- Managing quality in P/M industries. G.S. Upadhyaya. News Letter PMAI,
Vol-6, No. 1-2, 1980, p.8.
- Effect of Mo on sintering of iron and iron - P premixes. M. Hamiuddin,
G.S. Upadhyaya. Powder Metallurgy, No. 3, 1980, p.136.
- Effect of Mo and Cu on sintering of Fe - 0.45P premix. Md. Hamiuddin,
G.S. Upadhyaya. Trans. PMAI, Vol-7, 1980, p.12.
- Effect of dispersoid volume fraction on strength differential in Pb
- base P/M composites. P.B. Kadam, G.S. Murty, G.S. Upadhyaya, M.L.
Vaidya. Trans. PMAI, Vol-7, 1980, p.91.
- Effect of repeated thermal cycling on densification of 4640 sintered
steel under load. U. Gangopadhyay, G.S. Upadhyaya, M.L. Vaidya. Trans.
PMAI, Vol-7, 1980, p.96.
- Powder forging - Problems and prospect. G.S. Upadhyaya. Proceedings
of All India Seminar on 'Forging for Automobiles', Jan. 1981, Chandigarh,
IIM Chandigarh Chapter.
- Effect of repeated phase transformation on sintering of 4640 steel.
U. Gangopadhyay, G.S. Upadhyaya, M.L. Vaidya. Science of Sintering,
Vol-13, No. 2, 1981, p.113-123.
- Carburizing behaviour of sintered ferrous alloys. Md. Hamiuddin, G.S.
Upadhyaya. Proceedings of VII International Powder Metallurgy Conference,
Dresden, Germany, Sept. 22-24, 1981, p.191-312.
- Electronic models and sintering of refractory carbides - An overview.
G.S. Upadhyaya. Synthetic Materials for Electronics(Ed. B. Jakowlew
et. al), Elsevier Scientific Publishing Company, Amsterdam, 1981, p.133-152.
- Consolidation of lead base P/M composites and their mechanical properties.
P.B. Kadam, G.S. Murty, G.S. Upadhyaya, M.L. Vaidya. Proceedings of
Int. Seminar on Pb, Zn and Cd - Retrospect and Prospect, 18-20 Nov.,
Indian Lead-Zinc Information Centre, New Delhi, 1981, p.M38-48.
- Effect of silicon addition on densification of aluminium bronzes.
S. Chopra, G.S. Upadhyaya. Trans. PMAI, Vol-8, 1981, p.33.
- Effect of alloying elements on densification and mechanical properties
of Fe-P powder premixes. M. Hamiuddin, G.S. Upadhyaya. Trans. PMAI,
Vol-8, 1981, p.56.
- Wear behaviour of sintered ferrous alloys containing phosphorus. M.
Hamiuddin, K. Gopinath, G.S. Upadhyaya.
Trans. PMAI, Vol-8, 1981, p.63.
- Abrasive wear of some heat treated P/M tool steels. G.S. Upadhyaya,
J.P. Misra, A.K. Patwardhan. Proceedings of the 10th Plansee Seminar,
June 1-5, 1981, (Ed. H.M. Ortnor), Vol. 3, p.89-96, Metallwerk Plansee,
Reutte, Austria.
- Effect of copper on sintered properties of P containing ternary iron
powder premixes. M. Hamiuddin, G.S. Upadhyaya. Powder Met. Int., Vol-14,
No. 1, 1982, p.20.
- Carbide-binder phases in cemented carbides. G.S. Upadhyaya. In 'Powder
Metallurgy Alloys'(Ed. P. Ramkrishnan), Oxford and IBH Publishing Co.,
New Delhi, 1982, p.77-89.
- An electron approach to the wear mechanism. G.S. Upadhyaya. Wear,
Vol-80, 1982, p.1-6.
- Wetting of ceramics with metallic melts. G.S. Upadhyaya. Proceedings
of Int. Symposium on Ceramics, 27-30th Nov., 1982, BHEL, Bangalore.
- Metallography of iron alloys containing P. M.M. Amin, M. Hamiuddin,
G.S. Upadhyaya. Pract. Metallography, Vol-19, 1982, p.403-412.
- Sintering of age hardenable 2041 Al - alloy based P/M composites.
A.K. Jha, G.S. Upadhyaya. Trans. PMAI, Vol-9, 1982, p.11.
- Preparation and properties of cast Al - composites containing P/M
inserts. S. Lal, G.S. Upadhyaya. ibid, p.28.
- Sintering of 9% tin bronze with iron additions through premix and
prealloyed routes. M.M. Collur, G.S. Upadhyaya. Ibid, p.36.
- Effect of alloying additions in sintering of Fe-P premixes. G.S. Upadhyaya,
M. Hamiuddin. In 'Sintering - Theory & Practice (Ed. D. Kolar, S.
Pejovnik and M.M. Ristic)', Elsevier Scientific Publishing Co., Amsterdam,
1982, p.291-298.
- Preparation and properties of Al- 10% Mn based cast composites containing
P/M inserts. S. Lal, G.S. Upadhyaya. Aluminium, Vol-59, No. 4, 1983,
p.299.
- Sintering of ferritic stainless steel -Al2O3 particulate composites.
S.K. Mukherjee, G.S. Upadhyaya. J. of Powder and Bulk Solids Technology,
Vol-7, No. 1, 1983, p.27-31.
- Sintered 434L ferritic stainless steel-Al2O3 particulate composites
containing P. S.K. Mukherjee, G.S. Upadhyaya. High Temperature Technology,
Vol-1, No. 4, May, 1983, p.229-233.
- Sintering of submicron tungsten based heavy alloys. V. Srikanth, G.S.
Upadhyaya. Int. J. of Refractory and Hard Metals,Vol-2, No. 3, Sept.,
1983, p.R1.
- Sintering of 434L ferritic stainless steel containing Al2O3 particles.
S.K. Mukherjee, G.S. Upadhyaya. Int. J. of Powder Metallurgy and Powder
Tech., Vol-19, No. 4, 1983, p.289-298.
- Properties of sintered 2014 Al-alloy composites containing WC. A.K.
Jha, G.S. Upadhyaya. J. of Mat. Sc. Letters, Vol-2, Dec., 1983, p.801-804.
- Transmission electron microscopy of Al-Cu based powder metallurgical
composites. A.K. Jha, T.R. Ramchandran, G.S. Upadhyaya. Pract. Metallography,
Vol-20, No. 11, 1983, p.562-569.
- Effect of reactive transition metal addition on sintering of 434L
ferritic stainless steel - Al2O3 particulate composites. S.K. Mukherjee,
G.S. Upadhyaya. Trans. PMAI, Vol-10, 1983, p.27.
- Sintering of some covalent-ionic bonded ceramics. G.S. Upadhyaya.
Ceramurgia, Vol-13, No. 5, Sept-Oct., 1983, p.195-199.
- Effect of tungsten particle size on sintered properties of heavy alloys.
V. Srikanth, G.S. Upadhyaya. Powder Technology, Vol-39, 1984, p.61-67.
- Wetting of ceramics by metal melts - An electronic approach. G.S.
Upadhyaya. In 'Sintered Metal-Ceramic Composites'(Ed. G.S. Upadhyaya),
Elsevier, Amsterdam, 1984, p.41.
- Tensile strength and ductility of Pb-base P/M composites. P.B. Kadam,
G.S. Murty, G.S. Upadhyaya, M.L. Vaidya. ibid, p.247.
- Bonding in sintered aluminium-refractory carbides composites. P.S.
Misra, G.S. Upadhyaya. ibid, p.255.
- 2014 Al-alloy-metglass sintered composites. A.K. Jha, G.S. Upadhyaya,
P.K. Rohatgi. ibid, p.259.
- Al-Ti based cast composites containing P/M inserts. S. Lal, G.S. Upadhyaya.
ibid, p.265.
- Activated sintering of 434L ferritic stainless steel-Al2O3 particulate
composites. S.K. Mukherji, G.S. Upadhyaya. ibid, p.253.
- Sintering of W-Cu-Ni heavy alloys with phosphide addition. V. Srikanth,
G.S. Upadhyaya. ibid, p.297.
- Sintering of high speed steel bonded TiC particulate composites. G.
Suresh, G.S. Upadhyaya. Trans. PMAI, Vol-11, 1984, p.9.
- Sintering of T15 high speed steel-TiN particulate composites. Y.K.
Mathur, G.S. Upadhyaya. Trans. PMAI, Vol-11, 1984, p.13.
- Sintering of WC-Co hard metals containing Nickel. D. Basu, G.S. Upadhyaya.
Trans. PMAI, Vol-11, 1984, p.1.
- Corrosion behaviour of sintered 434L ferritic stainless steel-Al2O3
composites containing early transition metals.
S.K. Mukherji, G.S. Upadhyaya. Materials Chemistry and Physics, Vol-12,
1985, p.419-435.
- Sintered ferritic stainless steels. G.S. Upadhyaya, S.K. Mukherji.
Pre print, UNEEC Conference on Powder Metallurgy, Minsk (Belorussia),
March 25-29, 1985.
- Anodic polarization study of sintered 434L ferritic stainless steel
and its particulate composites. S.K. Mukherji, A. Kumar, G.S. Upadhyaya.
Powder Metallurgy International, Vol-17, No. 4, 1985, p.172.
- Effect of Fe2P additions on corrosion behaviour of ferritic stainless
steel composite compacts containing 6 Vol. % Al2O3. S.K. Mukherji, A.
Kumar, G.S. Upadhyaya. British Corrosion J., Vol-20, No. 1, 1985, p.41.
- Corrosion behaviour of sintered 434L ferritic stainless steel-Al2O3
composites containing Phosphorus. S.K. Mukherji, G.S. Upadhyaya. Corrosion
Science, Vol-25, No. 7, 1985, p.463-470.
- Effect of Ni2P addition on sintered W-Cu-Ni heavy alloys. V. Srikanth,
G.S. Upadhyaya. Int. J. of Refractory and Hard Metals, Vol-4, No. 3,
Sept. 1985, p.138.
- Effect of different ball millings on size distribution of tungsten
powder. Asthana, G.S. Upadhyaya. ibid, p.146.
- Effect of binder composition and sintering period on the properties
of W-Fe-Ni heavy metal alloys. G.S. Upadhyaya,V. Srikanth. Proceedings
of 11th Int. Plansee Seminar, 20-24 May, 1985, Reutte(Austria), Vol-2,
(Ed. H. Bildstein and H.M. Ortner), Metallwerk Plansee, Reutte, 1985,
p.203.
- Iron and nickel substituted WC-10Co hard metals. G.S. Upadhyaya, D.
Basu. ibid, p.559.
- Mechanical behaviour of sintered ferritic stainless steel- Al2O3 composites
containing ternary additions. S.K. Mukherji, G.S. Upadhyaya. Mat. Sc.
and Engineering, Vol-75, 1985, p.67-78.
- Sintered 434L ferritic stainless Steels. G.S. Upadhyaya, S.K. Mukherji.
Materials and Design, Vol-6, No. 6, 1985.
- Oxidation behaviour of sintered 434L ferritic stainless steel - Al2O3
composites with ternary additions. S.K. Mukherji, G.S. Upadhyaya. Oxidation
of Metals, Vol-23, No. 3/4, 1985, p.177-189.
- Effect of milling variables on powder character and sintering behaviour
of 434L ferritic stainless steel - Al2O3 composites. S.K. Mukherji,
G.S. Upadhyaya. Trans. JIM, Vol-26, No. 10, Oct. 1985, p.763-771.
- Role of solidification in powder metallurgical processes. G.S. Upadhyaya.
Metals, Vol-1, No. 1, 1985, p.29.
- Effect of binder composition and sintering period on properties of
W-Co-Ni heavy alloys. V. Srikanth, G.S. Upadhyaya. Trans. PMAI, Vol-12,
1985, p.16.
- Effect of transition metal additions on the sintering of prealloyed
a-Brass P/M Compacts. V.C. Srivastava, G.S. Upadhyaya. Trans. PMAI,
Vol-12, 1985, p.22.
- Effect of tungsten particle size and binder composition on sintered
properties of heavy alloys. V. Srikanth, G.S. Upadhyaya. Modern Developments
in Powder Metallurgy, Vol-15-17, Ed. E.N. Aqua and C.I. Whiteman, Metal
Powder Ind. Federation., Princeton, 1985, p.51.
- Sintered Al-based particulate composites. G.S. Upadhyaya. Proceedings
of International Conf. on Aluminium, Nov. 1985, New Delhi, Indian Institute
of Metals, Delhi Chapter, 1986, p281.
- Sintered heavy alloys: A review. V. Srikanth, G.S. Upadhyaya. Int.
J. of Refractory and Hard Metals, Vol-5, No. 1, March, 1986, p.49-54.
- Properties of composites of 2014 Al alloy with Ni-Mo based metallic
glass particles. A.K. Jha, P.K. Rohatgi, G.S. Upadhyaya. J. of Mat.
Sc., Vol-21, 1986, p.1502-1508.
- Effect of various dispersoids on the sintering of powder premixes
based on the age-hardenable Al-alloy 2014.
A.K. Jha, G.S. Upadhyaya. Aluminium, Vol-62, No. 6, 1986, p.458-460.
- Powder metallurgy in India. G.S. Upadhyaya. Powder Metallurgy Int.,
Vol-18, No. 3, 1986, p.223.
- Decomposition sintering of Al-TiH2 powder premixes. A.K. Malhotra,
A.K. Patwardhan, G.S. Upadhyaya. Powder Metallurgy Int., Vol-18, No.
4, 1986, p.264.
- Sintered properties of W-Cr-Ni heavy alloys. V. Srikanth, G.S. Upadhyaya.
J. of the Less Common Metals, Vol-120, 1986, p.213-224.
- Contiguity variation in tungsten spheroids of sintered heavy alloys.
V. Srikanth, G.S. Upadhyaya. Metallography, Vol-19, 1986, p.437-445.
- Sintered tungsten based heavy alloys containing Ni2P. V. Srikanth,
G.S. Upadhyaya. Trans. PMAI, Vol-13, 1986, p.56.
- Sintering and heat treatment of low alloy steels made from partially
prealloyed powder. S.V.V. Ramana, M.L. Vaidya, G.S. Upadhyaya. Trans.
PMAI, Vol-13, 1986, p.126.
- Sintering of stainless steel and their based composites. S. Lal, G.S.
Upadhyaya. Review on Powder Metallurgy and Physical Ceramics, Vol-3,
No. 2, 1986, p.165-203.
- Role of early transition metals on sintering behaviour of ferritic
stainless steel-Al2O3 composites. S.K. Mukherji, G.S. Upadhyaya. In
'Proceed. of VI Powder Metallurgy Conference', Katowice (Poland), 19-21
September, 1984, Central Section of Powder Metallurgy, Gliwice, 1986,
Vol-II, p.357-372.
- Sintering of steel bonded titanium carbides. G. Suresh, G.S. Upadhyaya.
In 'Horizons of Powder Metallurgy', vol-1, (Ed. W.A. Kaysser and W.J.
Huppmann), Veriag Schmid, Freiburg, 1986, p.275.
- Effect of Y2O3 addition and sintering period on the properties of
P/M 316L austenitic stainless steel. S. Lal, G.S. Upadhyaya. J. of Mat.
Sc. Letters, Vol-6, 1987, p.761-764.
- High performance engineering ceramics - An overview. G.S. Upadhyaya.
In 'High Performance Ceramics', (Ed. BVS Subba Rao), Oxford and IBH
Publishing Co., New Delhi, 1987, p.3.
- Microstructure and properties of sintered low alloy Cr steels with
molybdenum addition. S.V.V. Ramana, M.L. Vaidya, G.S. Upadhyaya. Pract.
Metallography, Vol-24, 1987, p.105-118.
- Densification and spheroid growth of liquid phase sintered tungsten
heavy alloys. V. Srikanth, G.S. Upadhyaya.
Trans. PMAI, Vol-14, 1987, p.56.
- Effect of milling period and sintering temperature on the properties
of 316L austenitic stainless steel and 4 Vol. % Y2O3 containing particulate
composites. S. Lal, G.S. Upadhyaya. J. of Powder and Bulk Solids Technology,
Vol-11, No. 3, 1987, p.1-12.
- Extending role of powder metallurgy in advanced ceramics. G.S. Upadhyaya.
PMAI News Letter, Vol-14, No. 1, 1987, p.6.
- Role of Samsonov's Stable Electron Configuration model in sintering
of real systems. G.S. Upadhyaya. Science of Sintering, Vol-20, No. 1,
1988, p.23.
- Effect of sintering atmosphere and alumina addition on properties
of 6061 aluminium P/M alloy. A.K. Jha, S.V. Prasad, G.S. Upadhyaya.
Powder Metallurgy International, Vol-20, No. 5, 1988, p.18.
- Effect of copper and bronze additions on the sintered properties of
316L austenitic stainless steel and its composites containing 4 Vol.
% Y2O3. S. Lal, G.S. Upadhyaya. Powder Metallurgy International, Vol-20,
No. 3, 1988, p.35.
- Ferritic stainless steel-Al2O3 particulate sintered composites: Interface
interaction. G.S. Upadhyaya, S.K. Mukherji. In 'Interfaces in Polymer,
Ceramic, and Metal Matrix Composites', Ed. H. Ishida, Elsevier Sc. Publishing
Co., Inc, N.Y., 1988, p.389-397.
- Sintering of 70Ni/30Cu powder compacts through prealloy and premix
routes. G.S. Upadhyaya, R. Hulyal. In 'Mod. Dev. in Powder Metallurgy',
Vol-21, (Ed. P.U. Gummeson and D.A. Gustafson), MPIF, Princeton, 1988,
p.139-154.
- Effect of Ternary additions on the sintered properties of 316L stainless
steel and its yttria containing composites. S. Lal, G.S. Upadhyaya.
In 'Modern Dev. In Powder Metallurgy', Vol-18, (Ed. P.U. Gummeson and
D.A. Gustafson), MPIF, Princeton, 1988, p.581-594.
- Kinetics of neck growth during loose stack sintering. A.M. Gokhale,
N. Basavaiah, G.S. Upadhyaya. Metallurgical Trans. A, Vol-19A, September
1988, p.2153-2161.
- Powder metallurgy in India. G.S. Upadhyaya. Int. J. of Powder Metallurgy,
Vol-24, No. 3, 1988, p.259.
- Dry sliding wear of sintered 6061 aluminium alloy based particulate
composites containing solid lubricants.
A.K. Jha, S.V. Prasad, G.S. Upadhyaya. In 'Wear Resistance of Metals
and alloys', (Ed. G.R. Kingsbury), ASM International, Ohio, 1988, p.73-80.
- Cadmium in sintered electrical products. G.S. Upadhyaya. In Proceedings
of 'ILZIC Silver Jubilee Conference 1988', India Lead Zinc Information
Centre, New Delhi, 1988, p.47.1.
- Sintering of submicron WC-10Co hard metals containing Ni and Fe. G.S.
Upadhyaya, S.K. Bhaumik. Mat. Sc. & Engg.,A105/106, 1988, p.249-256,also
reprinted in Science of Hard Materials-3, Ed. V.K. Sarin, Elsevier Applied
Sc., Barking, U.K., 1988.
- Effect of cold work and annealing on the mechanical properties of
90W-7Ni-3Fe heavy alloy. V. Srikanth, G.S. Upadhyaya. J. of Mat. Sc.
Letters, Vol-7, 1988, p.195-197.
- Effect of carbide powder type and refractory compound additions on
properties of sintered WC-10Co hard metals. D. Basu, S.K. Bhaumik, G.S.
Upadhyaya. Int. J. of Refractory and Hard Metals, Vol-7, No. 3, September
1988, p.145.
- Some contributions of electron theory of sintering in real systems.
G.S. Upadhyaya. In 'Sintering 87', Ed. S. Somiya et. al, Elsevier Applied
Science, Barking, U.K., 1988, p.303-308.
- Effect of binder composition on sintering of tungsten based heavy
alloys. G.S. Upadhyaya, V. Srikanth. In 'Sintering 87', Ed. S. Somiya
et. al, Elsevier Applied Science, Barking, U.K., 1988, p.475-480.
- Sintering of 434L ferritic stainless steel-Al2O3 particulate composites.
G.S. Upadhyaya, S.K. Mukherji. In 'Sintering 87', Ed. S. Somiya et.
al, Elsevier Applied Science, Barking, U.K., 1988, p.719-724.
- Sintered 6061 alloy-solid lubricant particle composite sliding wear
and mechanisms of lubrication. A.K. Jha, S.V. Prasad, G.S. Upadhyaya.
Wear of Materials, 1989, Vol-I, (Ed. K.C. Ludema), American Soc. of
Mech. Engineers, N.Y., 1989, p.233-238 (also in Wear, Vol-133, 1989,
p.163-172).
- Sintering of WC-10Co hard metal containing intermetallic compound.
S.J. Majagi, G.S. Upadhyaya.Int. J. of Refractory and Hard Materials,
Vol-8, No. 2, June, 1989, p.111.
- Status of ceramic industry in India.G.S. Upadhyaya. Industrial Ceramics,
Vol-9, No. 2, 1989, p.55.
- Liquid phase sintering of P/M high speed steels. P.K. Kar, G.S. Upadhyaya.
Tool and Alloy Steels, Vol-23, No. 7, 1989, p.249-255.
- Effect of Y2O3 and Cu additions on the corrosion behaviour of sintered
316L austenitic stainless steel. S. Lal, M.N. Mungole, K.P. Singh, G.S.
Upadhyaya. Materials Forum, Vol-13, 1989, p.134-138.
- Surface roughness of sintered 6061 Al-alloy based particle composites.
G.S. Upadhyaya, A.K. Jha, S.V. Prasad. Powder Metalllurgy Int., Vol-21,
No. 4, 1989, p. 15-16.
- Extending role of powder metallurgical products for automobiles. G.S.
Upadhyaya. Proceedings of National Symposium on Automotive Materials
and Manufacturing Technology, 28-29 August 1989, The Automotive Research
Association of India, Pune, 1989, p.258.
- Effect of phosphorus and Si addition on the sintered properties of
316L austenitic stainless steel and its composites containing 4 Vol.
% yttria. S. Lal, G.S. Upadhyaya. Journal of Mat. Sci., Vol-24, 1989,
p.3069-3075.
- Dry sliding wear of sintered 6061 Al-alloy graphite particle composites.
A.K. Jha, S.V. Prasad, G.S. Upadhyaya. Tribology International, Vol-22,
No. 5, Oct. 1989, p.321-327.
- Sintering of WC-10Co hard metal containing superalloy. S.J. Majagi,
G.S. Upadhyaya. Int. J. of Refractory and Hard Materials, Vol-8, No.
4, 1989, p.232-235.
- Powder metallurgy metal matrix composites: an overview. G.S. Upadhyaya.
Metals, Materials and Processes, Vol-1, No. 3, 1989, p.217-228.
- Preparation and properties of 6061 Al alloy/graphite composites by
P/M routes. A.K. Jha, S.V. Prasad, G.S. Upadhyaya. Powder Metallurgy,
Vol-32, No. 4, 1989, p.309.
- Oxidation behaviour of sintered 316L austenitic stainless steel-yttria
composites with various additions. S. Lal, G.S. Upadhyaya. Oxidation
in Metals, Vol-32, Nos. 3/4, 1989, p.317-335.
- Sintering behaviour and properties of 6061 aluminium alloy-titanium
carbide particle composites. A.K. Jha, S.V. Prasad, G.S. Upadhyaya.
Science of Sintering, Vol-21, No. 2, 1989, p.81-89.
- Phase stability and sintering of multiphase alloy systems. G.S. Upadhyaya.
In 'Sci. of Sintering', Ed. D.P. Uskokovic, H. Palmour III and R.M.
Spriggs, Pergamon Press, N.Y., 1989, p.215-226.
- Novel liquid phase sintered high speed steels. G.S. Upadhyaya, P.K.
Kar. In 'Proceedings of the First Int. High Speed Steel Conference',
Leoben, 26-28th March, 1990, (Ed. G. Hackl and B. Hribernik), Montan
Universitat, Leoben, 1990, p.477-486.
- Effect of microstructure anisotropy on mechanical properties of P/M
7091 aluminium alloy. H.N. Azari, G.S. Murty, G.S. Upadhyaya. In 'Aluminium
Alloy 90', Proceedings of 2nd Int. conference on Aluminium alloy - their
physical and mechanical properties, Oct. 9-13, 1990, p.167.
- Sintered 6061 aluminium alloy based P/M particulate composites. A.K.
Jha, S.V. Prasad, G.S. Upadhyaya. ibid, p.144.
- Synergetics of sintering of multiphase metal and ceramic alloy systems.
G.S. Upadhyaya. In 'Sintering of Multiphase Metal and Ceramic Systems',
Ed. G.S. Upadhyaya, Sci-Tech. Publications, Vaduz, 1990, p.95-106.
- Sintering of lead bronze containing tin and its based porous bearings.
S. Kumar, G.S. Upadhyaya, M.L. Vaidya. ibid, p.259-267.
- Sintered 6061 Al alloy-graphite particle composites: Sliding wear
and mechanisms of lubrications. A.K. Jha, S.V. Prasad, G.S. Upadhyaya.
ibid, p.289-298.
- Liquid phase assisted sintering of 316L austenitic stainless steel-Al2O3
composites. S. Lal, G.S. Upadhyaya. ibid, p.361-368.
- Effect of carbide powder type and refractory compound additives on
properties of sintered WC-10Co hard metals. D. Basu, S.K. Bhaumik, G.S.
Upadhyaya. ibid, p.409-414.
- Liquid phase sintering of P/M high speed steels. P.K. Kar, G.S. Upadhyaya.
Powder Metallurgy Int., Vol-22, No. 1, 1990, p.23.
- Powder metallurgy in developing countries: Problems and prospects.
G.S. Upadhyaya. Powder Metallurgy Int., vol-22, No. 2, 1990, p.44.
- Effect of composition and sintering on the densification and microstructure
of tungsten heavy alloys containing Cu and Ni. K.N. Ramakrishnan, G.S.
Upadhyaya. Mat. Sci. Letters, Vol-9, 1990, p.456-459.
- Sintered 6061 Al alloy-particle composites. A.K. Jha, S.V. Prasad,
G.S. Upadhyaya. In 'Metal and Ceramic Matrix Composites: Processing,
Modelling and Mechanical Behaviour', Ed. R.B. Bhagat, A.H. Clauer, P.
Kumar, and A.M. Ritter, The Minerals, Metals and Materials Society,
Warrendale, 1990, p.127.
- Stereology of some liquid phase sintered metal-metal composites. G.S.
Upadhyaya. ibid, p.629.
- Mechanical behaviour of sintered 6061 Al alloy and its composites
containing soft or hard particles. A.K. Jha, S.V. Prasad, G.S. Upadhyaya.
Z. Metallkunde, Vol-81, 1990, No. 6, p.457-462.
- Activated sintered 6061 Al alloy particulate composites containing
coated graphite. A.K. Jha, S.V. Prasad, G.S. Upadhyaya. In 'Controlled
Interfaces in Composite Materials', (Ed. H. Ishida), Elsevier Science
Publishing Company, New York, 1990, p.829-840.
- Trends in advanced materials and processes. G.S. Upadhyaya. Materials
and Design, Vol-11, No. 4, 1990, p.171-179.
- Powder metallurgy in India. G.S. Upadhyaya. International J. of Powder
Metallurgy, Vol-26, No. 4, 1990, p.391-395.
- Liquid phase sintering and heat treatment of T15 P/M high speed steel.
P.K. Kar, G.S. Upadhyaya. Metal Powder Report, Vol-45, No. 12, 1990,
p.841-843, also in Trans. PMAI, Vol-17, 1990, p.25-32.
- Liquid phase sintering of binary Cu alloys. G.S. Upadhyaya, A. Bhattacharjee.
Int. J. of Powder Metallurgy, Vol-27, No. 1, 1991, p.23.
- Powder metallurgy at the Indian Institute of Technology, Kanpur. G.S.
Upadhyaya. Int. J. of Powder Metallurgy, Vol-27, No. 1, 1991, p.59.
- Metallurgy to materials science and engineering. G.S. Upadhyaya. Tool
and Alloy Steels, Jan. 1991, p.4.
- Sintered 316L austenitic stainless steels and role of alloy additives.
S. Lal, G.S. Upadhyaya. Tool and Alloy Steels, March-April, 1991, p.123-127.
- SEM study of the fracture behaviour of some WC based cemented carbides.
S.K. Bhaumik, G.S. Upadhyaya, M.L. Vaidya. Pract. Metallography, Vol-28,
1991, p.238.
- Sintering of WC-10Co hard metals containing vanadium carbonitride
and Re, Part I. R. Hulyal, G.S. Upadhyaya. Int. J. of Refractory and
Hard Materials, Vol-10, No. 1, 1991, p.1-7.
- Sintering of WC-10Co hard metals containing vanadium carbonitride
and Re, Part II. R. Hulyal, G.S. Upadhyaya. ibid, p.9-13.
- Liquid phase sintering of TiN-enriched T15 grade high speed steels
and their mechanical properties. P.K. Kar, G.S. Upadhyaya. Steel Research,
Vol-62, No. 8, 1991, p.352-357.
- Elevated temperature ductility of rapidly solidified 7091 P/M aluminium
alloy. H.N. Azari, G.S. Murty, G.S. Upadhyaya. In 'Proceedings of the
2nd Int. Conference on Aluminium: INCAL-91', 31st July-2nd August 1991,
The Aluminium Association of India, Bangalore, Vol-2, 1991, p.625-630.
- Sintering of lead bronze containing tin. S. Kumar, G.S. Upadhyaya,
M.L. Vaidya. J. Mat. Engg., Vol-13, 1991, p.237-242.
- Mechanical properties and microstructure of carbide and binder modified
WC-10Co cemented carbides.
S.K. Bhaumik, G.S. Upadhyaya, M.L. Vaidya. In 'Advances in Powder Metallurgy-1991',
Vol-6, (Ed. L.F. Phase III and R.L. Sansoucy), MPIF, Princeton, 1991,
p.435-450.
- Properties and microstructure of WC-TiC-Co and WC-TiC-Mo2C-Co(Ni)
cemented carbides. S.K. Bhaumik, G.S. Upadhyaya, M.L. Vaidya. Materials
Science and Technology, Vol-7, August 1991, p.723-727.
- Sintering aspects of nonoxide ceramics. G.S. Upadhyaya. In 'Advanced
Ceramics', (Ed. G. Ganguly, S.K. Roy and P.R. Roy), Trans. Tech. Publications,
Zurich, 1991, p.205-225.
- Transient liquid phase sintering of some binary and ternary a-titanium
alloy of Ti-Al-Sn system. M. Sujata, S. Bhargava, G.S. Upadhyaya. Science
of Sintering, Vol-23, No. 3, 1991, p.163-181.
- Alloy design of WC-10Co hard metals with modifications in carbide
and binder phases. S.K. Bhaumik, G.S. Upadhyaya, M.L. Vaidya. Int. J.
of Refractory and Hard Materials, Vol-11, 1991, p.9-22.
- Effect of TiN addition on sintering behaviour and mechanical properties
of WC-10Co hard metals containing Mo2C and Ni. S.K. Bhaumik, G.S. Upadhyaya,
M.L. Vaidya. J. of Mat. Sci., Vol-27, 1992, p.1947-1959.
- Liquid phase sintering of TiC or TiN enriched T15 grade high speed
steels and their mechanical properties.
G.S. Upadhyaya, P.K. Kar. In 'Sintering 1991'(Ed. A.C.D. Chaklader and
J.A. Lund), Trans. Tech. Publication, Zurich, 1992.
- A transmission electron microscopy study of WC-10Co cemented carbides
with modified hard and binder phases. S.K. Bhaumik, G.S. Upadhyaya,
M.L. Vaidya. Materials Characterization, Vol-28, No. 3, 1992, p.241.
- Oxidation behaviour of hard and binder phase modified WC-10Co cemented
carbides. S.K. Bhaumik, R. Balasubramaniam, G.S. Upadhyaya. J. of Mat.
Sci. Letters, Vol-11, 1992, p.1457-1459.
- Liquid phase sintering and heat treatment of T42 high speed steels.
P.K. Kar, G.S. Upadhyaya. Metal Powder Report, Vol-47, No. 6, 1992,
p.34-40.
- SEM study of the fracture behaviour of WC-TiN-Co and WC-TiN-Mo2C-Co(Ni)
cemented carbides.
S.K. Bhaumik, G.S. Upadhyaya, M.L. Vaidya. Practical Metallography,
Vol-29, No. 7, 1992, p.366-373.
- Microstructure and mechanical properties of WC-TiN-Co and WC-TiN-Mo2C-Co(Ni)
cemented carbides.
S.K. Bhaumik, G.S. Upadhyaya, M.L. Vaidya. Ceramics International, Vol-18,
No. 5, 1992, p.327-336.
- Sintering aspects of high Tc oxide superconductors - An overview,
Part I. A.C. Vajpei, G.S. Upadhyaya.
Science of Sintering, Vol-24, No. 2, 1992, p.7782.
- Part II, Bismuth and thallium containing compounds. A.C. Vajpei,
G.S. Upadhyaya. Science of Sintering, Vol-24, No. 2, 1992, p.83-88.
- Part III, Advanced manufacturing methods. A.C. Vajpei, G.S. Upadhyaya.
Science of Sintering, Vol-24, No. 2, 1992, p.89-93.
- Liquid phase sintering of T15 and T42 high speed steel composites
containing Ti(C,N). B.P. Saha, G.S. Upadhyaya. Powder Metallurgy International,
Vol-24, No. 6, 1992, p.345-350.
- Tungsten spheroid growth in liquid phase sintered heavy alloys. G.S.
Upadhyaya, V. Srikanth. Grain Growth in Polycrystalline Materials, Part
II, (Ed. G. Abbruzzese & P. Brozzo), Trans Tech Publications, Zurich,
1992, p.811-820.
- Liquid phase sintering of T15 and T42 high speed steel composites
containing TiB2. B.P. Saha, G.S. Upadhyaya. J. of Materials Processing
Technlogy, Vol-36, 1993, p.363-382.
- Densification of Ti-Al-V powder compacts prepared through premix or
prealloyed routes. M. Sujata, S. Bhargava, G.S. Upadhyaya. Powder Metallurgy
International, Vol-25, No. 2, 1993, p.70.
- Properties of sintered T15 and T42 high speed steels. P.K. Kar, B.P.
Saha, G.S. Upadhyaya.
Int. J. of Powder Metallurgy, 29, Vol-2, 1993, p.135-148.
- Sintering of 434L ferritic stainless steel-Al2O3 particulate composites.
G.S. Upadhyaya, S.K. Mukherjee.
Proceedings of 7th Int. Metallurgy and Materials Congress, 4-8th May,
1993, Ankara, Vol-2, UCTEA Chamber of Metallurgical Engineers, Ankara,
1993, p.1195.
- Liquid phase sintering of T15 grade high speed steels containing TiN
particulates. G.S. Upadhyaya, P.K. Kar. ibid, p.1205.
- Full density processing of complex WC based cemented carbides. S.K.
Bhaumik, G.S. Upadhyaya, M.L. Vaidya. ibid, p.1217.
- Effect of heat treatment on the microstructure and mechanical properties
of rapidly solidified 7091 P/M aluminium alloy. H.N. Azari, G.S. Murty,
G.S. Upadhyaya. Pract. Metallography, Vol-30, No. 4, 1993, p.186-199.
- Liquid phase sintered T15 or T42 high speed steel-TiC particulate
composites. G.S. Upadhyaya, P.K. Kar. Proceedings of 13th Int. Plansee
Seminar (Ed. H. Bildstein and R. Eck), Metallwerk Plansee, Reutte, Vol-2,
1993, p.328-342.
- Corrosion behaviour of sintered 6061 Al-alloy graphite particle composites.
M. Saxena, A.K. Jha, G.S. Upadhyaya. J. of Materials Science, Vol-28,
1993, p.4053-4058.
- Elevated temperature deformation behaviour of alumina-dispersed P/M
copper. Govind, R. Balasubramaniam, G.S. Upadhyaya. Materials Chemistry
and Physics, Vol-36, No. 3-4, 1993, p.371-376.
- Effect of hydrogen on ductility of ODS copper. Govind, R. Balasubramaniam,
G.S. Upadhyaya. Scripta Met. et Materiala, Vol-29, 1993, p.1303.
- Thermomechanical treatments and recrystallization response of 7091
P/M aluminium alloy. H.N. Azari, G.S. Murty, G.S. Upadhyaya. Berg-und
Huttenmannische Monatschffts, No. 6, 1993, p.347.
- Interface interactions in WC based cemented carbides: A TEM study.
S.K. Bhaumik, G.S. Upadhyaya, M.L. Vaidya. Composite Interfaces, Vol-1,
No. 4, 1993, p.357-364.
- Processing and properties of sintered tool steels and cemented carbides.
G.S. Upadhyaya. Bull. Mat. Sci., Vol-16, No. 6, 1993, p.465-476.
- High temperature deformation of rapidly solidified 7091 powder metallurgy
aluminium alloy. H.N. Azari, G.S. Murty, G.S. Upadhyaya. Materials Sci.
and Technology, Vol-9, 1993, p.686.
- Elevated temperature strengthening in carbide (Al4C3) dispersed aluminium.
M.V. Gurjar, G.S. Murty, G.S. Upadhyaya. J. of Mat. Sci., Vol-28, 1993,
p.5054.
- Anisotropy in the microstructure and mechanical properties of P/M
7091 aluminium alloy. H.N. Azari, G.S. Murty, G.S. Upadhyaya. Materials
Chemistry and Physics, Vol-37, 1994, p.349-354.
- Refractory compound enriched T42 high speed steels by liquid phase
sintering. P.K. Kar, G.S. Upadhyaya. Materials & Design, Vol-15,
No. 2, 1994, p.99.
- Effect of Ti(C,N) addition on sintering behaviour and properties of
binder modified WC-10Co cemented carbides. S.K. Bhaumik, G.S. Upadhyaya,
M.L. Vaidya. J. of Materials Sci., Vol-29, 1994, p.54-60.
- P/M metal matrix composites: Experience at IIT Kanpur. G.S. Upadhyaya.
Materials & Design, Vol-15, No. 3, 1994, p.155.
- Superplastic behaviour of thermomechanically treated P/M 7091 aluminium
alloy. H.N. Azari, G.S. Murty, G.S. Upadhyaya. Metallurgical and Materials
Trans A, 25A, 1994, p.2153.
- Electronic mechanisms of sintering: Some case studies on real systems.
G.S. Upadhyaya. Bulletin of Materials Science, Vol-17, No. 6, 1994,
p.921-934.
- Powder metallurgy high speed steels and their composites. P.K. Kar,
G.S. Upadhyaya. Tool & Alloy Steels, Vol-29, No. 1, 1995, p.1.
- Molybdenum base TZM alloy as the die material. G.S. Upadhyaya. In
'Proceedings of Nationals Conference Forge India, 95', 25-26 April 1995,
New Delhi, IIM Delhi chapter, Delhi, 1995, paper No. C3.
- Sintering of real systems. G.S. Upadhyaya. Science of Sintering, Vol-27,
No. 2, 1995, p.49-70.
- Sintered 6061 Al alloy-Al2O3-/BN particulate composites. D.K. Gaur,
G.S. Upadhyaya. Trans. IIM, Vol-48, No. 2, 1995, p.85-96.
- Sintering of copper- Al2O3 composites through blending and mechanical
alloying powder metallurgy routes. Upadhyaya, G.S. Upadhyaya. Materials
& Design, Vol-16, No. 1, 1995, p.41-45.
- SEM studies of Mullite-ZrO2 particulate composites. N. Kapuri, K.N.
Rai, G.S. Upadhyaya, G.K. Warrior, K.G. Satyanarayana. Pract. Metallography,
Vol-32, No. 4, 1995, p.197-206.
- Thermomechanical treatment & Superplastic forming of P/M 7091
aluminium alloy. H.N. Azari, G.S. Murty, G.S. Upadhyaya. In 'Proceedings
of Heat Treatment & Surface Engineering, IFHT'95', Ed. M. Salehi,
Isfahan, Iran, Sept. 1995, p.289-294.
- Sintering of real systems - A perspective of my academic research
(GD Birla Lecture). G.S. Upadhyaya.
Trans. IIM, Vol-48, No. 4, 1995, p.275-287.
- High temperature deformation of rapidly solidified P/M 7091 aluminium
alloy. H.N. Azari, G.S. Murty, G.S. Upadhyaya. Sc. & Tech. Of Rapid
Solidification and Processing, Ed. M.A. Otooni, Kluwer Academic publishers,
Dordrecht, 1995, p.195-203.
- Sintering of mullite prepared through two routes. N. Kapuri, K.N.
Rai, G.S. Upadhyaya. Trans. Ind. Cer. Soc., Vol-54, No. 3, 1995, p.65-73.
- Sintering of mullite based particulate composites containing zirconia.
N. Kapuri, K.N. Rai, G.S. Upadhyaya. In 'Fourth Euro Ceramic', Vol-4,
Ed. A. Bellosi, Gruppo Editorial, Faenza Editrice SpA., Faenza (Italy),
1995, p.45-52.
- 2014 and 6061 Al-alloy based powder metallurgy composites containing
SiC particles/fibres. Srinivasa Rao, G.S. Upadhyaya. Materials &
Design, Vol-16, No. 6, 1995, p.359-366.
- Powder metallurgy processing of aluminide intermetallics. S. Suwas,
G.S. Upadhyaya. Metals, Materials and Processes, Vol-7, No. 4, 1995,
p.225-250.
- Effect of binder phase modification and Cr3C2 addition on properties
of WC-10Co cemented carbide.
Banerjee, G.K. Lal, G.S. Upadhyaya. J. of Materials Engg. & Performance,
Vol-4, No. 5, 1995, p.563-572.
- Processing of mullite and its composites, Part I. N. Kapuri, K.N.
Rai, G.S. Upadhyaya. Ceramic Industries International, Vol-105, December
1995-Jan 1996, p.12-16.
- Sintering of fused mullite basded particulate composites conatining
zirconia. N. Kapuri, K.N. Rai, G.S. Upadhyaya. Mat. & Manufacturing
Processes, Vol-11, No. 1, 1996, p.137-151.
- Processing of Mullite and its composites, Part II. N. Kapuri, K.N.
Rai, G.S. Upadhyaya. Ceramic Industries International, Vol-106, Feb/March
1996, p.14-18.
- Sintering of Mullite based particulate composites containing ZrO2.
N. Kapuri, K.N. Rai, G.S. Upadhyaya.
J. of Mat. Sc., Vol-31, 1996, p.1481-1487.
- Full density processing of complex WC based cemented carbides. S.K.
Bhaumik, G.S. Upadhyaya, M.L. Vaidya. J. of Mat. Processing Tech., Vol-58,
1996, p.45-52.
- Development of Al-Ti based cast composites containing powder metallurgy
inserts. Sohan Lal, G.S. Upadhyaya. Tool & alloy Steels, Vol-30,
No. 12, 1996, p.44-49.
- Sintering of binder modified Mo2Fe(Ni)B2-Fe(Ni) cermets and their
properties. G.S. Upadhyaya, P.K. Bagdi. Sintering Technology, Ed. R.M.
German, G.L. Messing and R.G. Cornwall, Marcel Dekker, New York, 1996,
p.181-188.
- Sintered mullite-ZrO2 composites prepared through different routes.
N. Kapuri, K.N. Rai, G.S. Upadhyaya. Interceram, Vol-45, No. 6, 1996,
p.427-436.
- Role of Cr3C2 in tungsten carbide based hard composites. G.S. Upadhyaya,
D. Banerjee. In 'Proceedings of 14th Int. Plansee Seminar', Vol-2, (Ed.
G. Kneringer, Rodhammer and P. Wilhartitz), Plansee AG, Reutte(Austria),
1997, p.463-476.
- Effect of sol-gel mullite composition on sintering of zirconia containing
composites. N. Kapuri, K.N. Rai, G.S. Upadhyaya. Science of Sintering,
Vol-25, No. 2, 1997, p.77-93.
- Indian metallurgical engineering: A challenge. G.S. Upadhyaya. Tool
& Alloy Steels, Vol-31, No. 8, 1997, p.9.
- Short bar plane-strain fracture toughness testing. G.S. Upadhyaya.
Tool & Alloy Steels, Vol-31, No. 12, 1997, p.8.
- Sliding wear behaviour of T15-Al2O3 particulate composites with or
without 5 wt. % copper addition. P. Mazumdar, G.S. Upadhyaya. Tool &
Alloy Steels, Vol-32, No. 7, 1998, p.3-10.
- Powder metallurgy aluminium alloy-SiC composites. C.S. Rao, G.S. Upadhyaya.
Brazilian J. of Mat. Science & Engg., Vol- 1, No. 1, 1998, p.40-55.
- Co-sintering of tungsten alloy slurry coated alumina composites and
their properties. K. Biswas, G.S. Upadhyaya. Materials & Design,
Vol-19, 1998, p.231-240.
- WC-Co based cemented carbides with large Cr3C2 additions. V. Zeckrissori,
D. Jansson, G.S. Upadhyaya, H.O. Andren. Int. J. of Refractory Metals
& Hard Materials, Vol-16, 1998, p.417-422.
- Sintering of some low alloy steels & their heat treatment. A.K.
Agrawal, G.S. Upadhyaya. Tool & Alloy Steels, Vol-32, No. 12, 1998,
p.21-27.
- Copper enhances the sintering of duplex P/M stainless steels. P. Datta,
G.S. Upadhyaya. Metal Powder Report, Vol-54, No. 1, Jan. 1999, p.26-29.
- Effect of sintering variables on the properties of 316L and 434L stainless
steels. P. Datta, G.S. Upadhyaya. Industrial Heating, June, 1999, No.
6, p.37-41.
- Shrinkage and sintering of TiB-2 and TiB2-TiC composite under high
pressure. S.K. Bhaumik, C. Divakar, A.K. Singh, G.S. Upadhyaya. Mat.
Science & Engg. A, Vol-279, 2000, p.275-281.
- Effect of CrB addition on sintering of 316L/434L stainless steels-10
v/o Cr3C2 composites. P. Datta, G.S. Upadhyaya. Science of Sintering,
Vol-32, No. 1, 2000, p.109-120.
- Reactive liquid phase sintering of Mo2FeB2-Fe cermets. G.S. Upadhyaya,
P.K. Bagdi. Int. J. of Mat. & Product Technology, Vol-15, No. 3-5,
2000, p.275-291.
- Effect of sintering temperature on densification and properties of
T15-5wt.% Cu steels containing Al2O3 particles. P. Mazumdar, G.S. Upadhyaya.
Indian J. of Engg. & Materials Sciences, Vol-7, June, 2000, p.141-149.
- Sinter bonding of Mo2FeB2 based cermet onto steel substrate. Dhaval
Rao, G.S. Upadhyaya. P/M Science & Technology Briefs, Vol-2, No.
4, 2000, p.9-13.
- Some issues in sintering science and technology. G.S. Upadhyaya. Materials
Chemistry and Physics, Vol-67, No. 1-3, 2001, p.1-5.
- Liquid phase sintering and microstructure-property relationships of
silicon carbide ceramics with oxynitride additives. K. Biswas, G. Rixecker,
I. Wiedmann, M. Schweizer, G.S. Upadhyaya, F. Aldinger. Materials Chemistry
and Physics, Vol-67, No. 1-3, 2001, p.180-191.
- Sintered porous cermets based on TiB2 and TiB2-TiC-Mo2C. M.Singh,
K.N. Rai, G.S. Upadhyaya. Materials Chemistry and Physics, Vol-67, No.
1-3, 2001, p.226-233.
- Sintered duplex stainless steels from premixes of 316L and 434L powders.
P.Datta, G.S. Upadhyaya. Materials Chemistry and Physics, Vol-67, No.
1-3, 2001, p.234-242.
- Sintering of Mo2FeB2 layered cermet containing SiC fibers. Rao and
G.S. Upadhyaya. Materials Chemistry and Physics, Vol-70, 2001, p.336-339.
- Corrosion behaviour of fully dense P/M Al and Cu alloys. M. Debata
and G.S. Upadhyaya. Proceedings Global-2000 Corrosion Meet (Corrcon-2000),
Mumbai, Vol-1, Paper No. 1 (CD -ROM).
|