Publications:

---

1. "Micro-mechanisms of Shear Deformation during High Pressure Torsion of Equiatomic FeMnNi Medium Entropy Alloy" by Saumya Ranjan Jha, Nilesh P Gurao, K Biswas, Journal of Materials Science (2024) {Under Review}

2. "A Robust Method of Denoising Experimental Micrographs Using Deep Learning" by Owais Ahmad, Albert Linda, Saumya Ranjan Jha, Somnath Bhowmick, Materials Characterization (2024) {Under Review}

3. "Effect of the deformation temperature and strain on the strain rate sensitivity of fcc medium-entropy alloys" by Swati Mahato, Saumya R Jha, Reshma Sonkusare, K Biswas, N P Gurao, Journal of Applied Physics, Vol 136 (2024), 025103

4. "High Throughput Experimental and Computational Framework to Investigate the Thermal Cycling approach for strengthening low SFE FeMnNi Medium Entropy Alloy" by Saumya Ranjan Jha, Surya Ardham, Gerald Tennyson, Nilesh P Gurao, K Biswas, Materialia, Vol 32 (2023), 101937

5. "Microstructure and mechanical property correlation in Silicon-doped equiatomic FeMnNi MEA: experiments and simulation" by Saumya R Jha, Jhilik Sen, Jitesh Kumar, K Biswas, Journal of Alloys and Compounds, Vol 965 (2023), 171491

6. "Understanding the evolution of catalytically active multi-metal sites in a bifunctional high-entropy alloy electrocalyst for zinc-air battery application" by Chetna Madan, Saumya R Jha, Nirmal Kumar Katiyar, Arkaj Singh, Rahul Mitra, Chandra Sekhar Tiwary, K Biswas, Aditi Halder, Energy Advances, Vol 2 (2023), 2055-2068

7. "Novel alloy design concepts enabling enhanced mechanical properties of High Entropy Alloys" by Jitesh Kumar, Saumya R Jha, Abheepsit Raturi, Anurag Bajpai, Reshma Sonkusare, Nilesh P Gurao, K Biswas, Frontiers in Materials, Vol 9 (2022), 868721

8. "Achieving high strength and ductility in equimolar FeMnNi medium entropy alloy by tuning Microstructural Entropy" by Saumya R Jha, N P Gurao, K Biswas, Materials Science & Engineering A, Vol 826 (2021), 141965

9. "Effect of Heat Treatment on Corrosion properties of Selective Laser Melted Stainless Steel parts" by Sagar Sarkar, Saumya Jha, Ashish Kumar Nath, ASME International Manufacturing Science and Engineering Conference, Vol. 1: Additive Manufacturing: Bio and Sustainable Manufacturing (2018)

10. "Understanding the Deformation Behavior of CoCuFeMnNi High Entropy Alloy by Investigating Mechanical Properties of Binary, Ternary and Quaternary Alloy Subsets" by Rani Agarwal, Reshma Sonkusare, Saumya R Jha, Nilesh Gurao, Krishanu Biswas, Niraj Nayan, Materials & Design, Vol 157 (2018), 539 – 550, Elsevier Publications

Book Chapter

---

1. "An Odyssey from High Entropy Alloys to Complex Concentrated Alloys" by Jitesh Kumar, Saumya R Jha, Krishanu Biswas, N P Gurao, New Horizons in Metallurgy, Materials and Manufacturing, The Indian Institute of Metals (2021)

2. "Iron-containing Complex Concentrated Alloys: Next Gen Materials" by Saumya R Jha, Krishanu Biswas, Metal News, The Indian Institute of Metals (2022)

Conferences:

---

1. "High Pressure Torsion Deformation Behavior of a Low-SFE FCC Ternary Medium Entropy Alloy" by Saumya R Jha, Niraj Chawake, Krishanu Biswas, Nilesh P Gurao, 4th International Workshop on High Entropy Materials (IWHEM 2023) (held in BARC Mumbai).

2. "Computational evaluation of mechanical characteristics improved by thermal cycling-assisted grain size modulation" by Saumya R Jha, N P Gurao, Krishanu Biswas, Perspectives in Materials Research (Platinum Jubilee Conference 2022) (held in IISc Bangalore).

3. "Effect of modulation in grain size distributions and recrystallization kinetics over mechanical properties of low SFE Medium Entropy Alloy" by Saumya R Jha, Krishanu Biswas, N P Gurao, Advances in Materials & Processing: Challenges & Opportunities (AMPCO 2022) (held in IIT Roorkee).

4. "Improvement in mechanical properties of ternary MEA by interrupted annealing and thermal cycling" by Saumya R Jha, Krishanu Biswas, N P Gurao, 19th International Conference on Strength of Materials (2022) (held in University of Lorraine, France).

5. "Quasi-hydrostatic quasi-constrained severe plastic deformation of ternary medium entropy alloy" by Saumya R Jha, Krishanu Biswas, N P Gurao, 150th TMS 2022 Annual Meeting & Exhibition, The Minerals, Metals & Materials Society (2022) (held in USA).

6. "Constitutive modelling of grain boundary strengthening characteristics in Complex Concentrated Alloys" by Saumya R Jha, N P Gurao, Krishanu Biswas, 71st Annual Technical Meet, National Metallurgists’ Day (NMD ATM), The Indian Institute of Metals (2021) (presented online).

7. "An alternative modelling approach to predict Hall-Petch strengthening in Complex Concentrated Alloys" by Saumya R Jha, K Biswas, Nilesh P. Gurao, International Conference on Advanced Materials & Mechanical Characterization (ICAMMC 2021) (presented online).

8. "Unravelling the underlying strengthening mechanisms in Single Phase Quinary CoCuFeMnNi and subset alloys" by Saumya R Jha, Sailaja Sharma, Krishanu Biswas, N P Gurao, 3rd International Workshop on High Entropy Materials (IWHEM 2020) (held in IIT Kanpur).

9. "Evolution of Microstructure, Texture and underlying strengthening mechanisms in single phase quinary CoCuFeMnNi and subset alloys" by Saumya R Jha, R Agarwal, R Sonkusare, K Biswas, N P Gurao, 26th International Symposium on Metastable, Amorphous and Nanostructured Materials (ISMANAM 2019) (held in IIT Madras).

10. "An experimental investigation on solid solution strengthening in medium and high entropy alloys" by S R Jha, R. Agarwal, R. Sonkusare, Krishanu Biswas, N. P. Gurao, Mechanical Behaviour of Materials: 75th National Metallurgists’ Day (NMD ATM), The Indian Institute of Metals (2017) (held in BITS Pilani).