Publications



Journal Articles: Published (107)


Total citations: ~ 2327 (as per google scholar), h-index: 29, i10-index: 62


Journal Articles: Under review/submitted (04)


  1. V. Mandal, P. Tripathi, S. Sharma, S. S. Singh, J. Ramkumar, A numerical and experimental study on single-track additive manufacturing of IN718 super alloys using laser powder bed fusion (L-PBF).
  2. S. S. Panda, J. Bhagyaraj, A. K. Prasad, S. Mukherjee, J. Jain, S. S. Singh, Tension-compression asymmetry in Ti50Ni45Fe5 pseudo-binary B2 intermetallic, Materials Science and Engineering A.
  3. S. S. Panda, S. Sahni, J. Bhagyaraj, Shubhakar M, S. Mukherjee, J. Jain, S. S. Singh, Deformation Characteristics of Ti-Ni-Fe based dual two-phase (B2 +DO24) intermetallic alloys: Experiments and Atomistic Simulation.
  4. S. S. Panda, S. Sahni, Shubhakar M, J. Bhagyaraj, S. Mukherjee, J. Jain, S. S. Singh, Hardness anomaly in Ti-Ni-Fe pseudo-binary B2 intermetallic using nanoindentation and MD simulation.

  5. Journal Articles: Accepted/Published (107)


  6. G. Gupta, R. Pandey, S. Mangam, S. Ganguly, J. Jain, S. S. Singh, Developent and Characterization of Novel Mg-6Zn-0.6Si-xSn Alloys with Varying Sn Addition, Materials Letters, Accepted (2024).
  7. S. S. Panda, B. Jayabalan, A. K. Prasad, S. Mukherjee, J. Jain, S. S. Singh, Elucidating the deformation characteristics of Ti-Ni-Fe based pseudo-binary B2 intermetallics, Intermetallics, 170 (2024) 108332.
  8. R. Pandey, G. Gupta, S. K. Pani, U. Godwal, J. Jain, S. Karagadde, S. Ghosh Chowdhury, S. S. Singh, Evolution of 3D microstructure and correlation with deformation behavior of as-cast Mg-4Zn-xCa alloys, 367 (2024) 136583.
  9. Neetu, Ireddey Nikhila, S. S. Panda, Uttam Reddy, J. Jain, K. Mondal, S. S. Singh, Effect of Aluminum Content on the Crevice Corrosion Behavior of Magnesium Alloys, Transaction of Indian Institute of Metals, 77 (2024) 1265-1274.
  10. H. Kancharla, G. K. Mandal, N. K. Prasad, K. Vishwanath, B. Bhushan, K. Godbole, S. S. Singh, K. Mondal, Effect of inter-critical annealing atmosphere on microstructure and subsequent corrosion behavior of hot-dip galvanized Mn containing high-strength steel, Journal of Applied Electrochemistry, 54 (2024) 1153-1170.
  11. P. Setia, H. K. Mehtani, S. S. Singh, T. Venkateswaran, P. C. Yadav, S. Shekhar, Micro-mechanical investigation of maraging steel during in-situ tensile test, Philosophical Magazine, 2024.
  12. P. Setia, N. Raja, S. S. Singh, S. Mukherjee, T. Venkateswaran, S. Shekhar, Exploring the hot deformation behavior of novel Si-containing austenitic stainless steel, Vacuum, 22 (2024) 113045.
  13. H. Kancharla, G. K. Mandal, K. G. Pradeep, S. S. Singh, K. Mondal, Understanding the formation mechanism of Al-rich interfacial layer during galvanizing of Cu pre-coated high-strength steel sheet, Journal of Materials Engineering and Performance 33 (2024) 999-1006.
  14. A. Kodam, M. S. Gundi, Y. L. Chiu, I. P. Jones, S. S. Singh, J. Jain, A review of challenges and opportunities in micropillar compression studies in Mg alloys, Journal of Magnesium and Alloys, 11 (2023) 4043-4053.
  15. C. Singh, S. S. Panda, S. S. Singh, J. Jain, Development of sustainable novel Mg-Ca-Sc alloys with exceptional corrosion resistance, Journal of Alloys and Compounds, 955 (2023) 170251.
  16. H. Kancharla, G. K. Mandal, R. R. Kumar, A. Chakraborty, S. S. Singh, K. Mondal, Effect of Annealing Time on Coating Microstructure, Frictional and Electrochemical Behavior of Galvannealed Interstitial-Free Steel, Journal of Materials Engineering and Performance, 32 (2023) 5932-5945.
  17. N. Ansari, S. Y. Lee, S. S. Singh, J. Jain, Effect of rolling routes on the microstructure, texture and mechanical properties of Mg-5Y binary alloy, Philosophical Magazine, 103 (2023) 840-859.
  18. V. Mandal, P. Tripathi, S. Sharma, S. S. Singh, J. Ramkumar, Fabrication of Ex-situ TiN Reinforced IN718 Composites using Laser Powder Bed Fusion (L-PBF): Experimental Characterization and High-Fidelity Numerical Simulations, Ceramic International, 49 (2023)14408-14425.
  19. S. S. Panda, R. Sarvesha, J. Jain, S. S. Singh, Elucidating the deformation behavior of as-cast B2 CoTi intermetallic using in-situ tensile testing, Materials Science and Engineering: A, 871 (2023) 144901.
  20. H. Kancharla, G. K. Mandal, H.S. Maharana, S. S. Singh, K. Mondal, Structure-Dependent Corrosion Behavior of Electrodeposited Zn Coating, Journal of Materials Engineering and Performance, 32 (2023) 2993-3006.
  21. A. Kumar, J. Bhagyaraj, C. Singh, J. Jain, S. Mukherjee, K. Biswas, S. S. Singh, Role of chromium content on the microstructure and mechanical properties of lanthana based ferritic ODS steels, Metals and Materials International, 29 (2023) 1067-1078.
  22. P. Setia, S. Mukherjee, S. S. Singh, T. Venkateswaran, Shashank Shekhar, Deformation characteristics and microstructure evolution during hot deformation of 18Cr-12Ni-4Si stainless steel, Journal of Materials Science, 58 (2023) 4987-5009.
  23. V. Mandal, V. Tiwari, M. Sarkar, S. S. Singh, J. Ramkumar, Numerical and experimental study of micro-convex dimple developed by laser additive manufacturing for surface applications, Manufacturing Technology Today, 22 (2023) 45-50.
  24. A. Kumar, J. Bhagyaraj, C. Singh, J. Jain, S. Mukherjee, K. Biswas, S. S. Singh Wear behavior of nano-La2O3 dispersed ferritic ODS steel developed by spark plasma sintering, Oxford Open Materials Science, 3 (2023).
  25. P. Kumar, Tu-Ngoc Lam, P. K. Tripathi, S. S. Singh, P. K. Liaw, E-Wen Huang, Recent progress in oxidation behavior of high-entropy alloys: A review, APL Materials, 10 (2022) 120701.
  26. C. Singh, S. S. Singh, J. Jain, Elucidating the role of micro-galvanic coupling between eutectic a-Mg lamellas and a-Mg matrix on the hydrogen evolution behaviour of Mg-0.6 Ca binary alloy using real-time imaging, Philosophical Magazine Letters, 102 (2022) 299-306.
  27. P. Setia, K. Vishwanath, K. Mondal, T. Venkateswaran, S. S. Singh, S. Shekhar, Cushioning effect of austenite in silicon stainless steels (SiSS) leading to improved wear resistance, Tribology International, 175 (2022) 107678.
  28. V. Mandal, P. Tripathi, A. Kumar, S. S. Singh, J. Ramkumar, A Study on Selective Laser Melting (SLM) of TiC and B4C Reinforced IN718 Metal Matrix Composites (MMCs), Journal of Alloys and Compounds, 901 (2022) 163527.
  29. A. Prasad, H. Vashishtha, S. S. Singh, N. N. Gosvami, J. Jain, La containing Mg alloy for enhanced corrosion at elevated temperatures in ethylene glycol media, Corrosion Science, 205 (2022) 110446.
  30. C. Singh, A. Gokhale, A. Varma, S. S. Singh, J. Jain, Elucidating the role of grain boundary sliding in enhanced ductility of high strain rate sensitive Mg-Ca binary alloy: An in-situ study, Materials Science and Engineering A, 851 (2022) 143613.
  31. S. Bajpai, A. Bhadauria, T. Venkateswaran, S. S. Singh, K. Balani, Spark plasma joining of HfB2-ZrB2 based Ultra High Temperature Ceramics using Ni interlayer, Materials Science and Engineering A, 838 (2022) 142818.
  32. A. Kumar, J. Bhagyaraj, C. Singh, J. Jain, S. Mukherjee, K. Biswas, S. S. Singh, Processing and Properties of Yttria and Lanthana Dispersed ODS Duplex Stainless Steels, Materials Science and Engineering A, 837 (2022) 142746.
  33. H. Kancharla, G. K. Mandal, S. S. Singh, K. Mondal, Effect of prior copper-coating on the microstructural development and corrosion behavior of hot-dip galvanized Mn containing high strength steel sheet, Surface and Coatings Technology 437 (2022) 128347.
  34. A. Prasad, S. Y. Lee, S. S. Singh, N. N. Gosvami, J. Jain, Texture weakening and enhanced recrystallization kinetics in a La containing Mg-Dy alloy, Materials Chemistry and Physics, 277 (2022) 125537.
  35. U. R. Ghori, A. Prasad, Y. Lu, Y. L. Chiu, I. P. Jones, S. S. Singh, N. N. Gosvami, J. Jain, Outstanding enhancement in critical resolved shear stress of basal slip with precipitation in Mg-10Dy-0.7 La alloy: a micro-pillar compression study, Materials Letters, 308 (2022) 131265.
  36. K. Harikrishna, G. K. Mandal, S. S. Singh, K. Mondal, Effect of strip entry temperature on the interfacial layer and corrosion behavior of galvanized steel, Surface and Coating Technology, 433 (2022) 128071.
  37. P. Setia, T. Venkateswaran, K. T. Tharian, J. Jain, S. S. Singh, S. Shekhar, Influence of Si content on the microstructure and mechanical properties of silicon stainless steel, Materials Science and Engineering A, 829 (2022) 142141
  38. A. Kumar, J. Bhagyaraj, A. Prasad, J. Jain, S. Mukherjee, K. Biswas, S. S. Singh, Microstructural and Mechanical Characterization of Tungsten Containing Lanthana Based Ferritic ODS Steel, Materials Science and Engineering A, 828 (2021) 142077.
  39. R. Sarvesha, D. Chalapathi, M. Yadava, J. Jain, S. S. Singh, In-situ studies on deformation and fracture characteristics of AZ91 Mg alloy, Materialia, 18 (2021) 101177.
  40. E-Wen Huang, Wen-Jay Lee, S. S. Singh, P. Kumar, Chih-Yu Lee, Tu-Ngoc Lam, Hsu-Hsuan Chin, Bi-Hsuan Lin, P. K. Liaw, Machine-Learning and High-Throughput Studies for High-Entropy Materials, Materials Science and Engineering R, Accepted (2021)
  41. V. Nandal, B. Harun, R. Sarvesha, S. S. Singh, E-Wen Huang, Y-Jen Chang, A-Chou Yeh, S. Neelakantan, J. Jain, Revealing the precipitation sequence with aging temperature in a non-equiatomic AlCoCrFeNi high entropy alloy, Metallurgical and Materials Transaction A, (2021) 1-8.
  42. V. Nandal, K. Hariharan, R. Sarvesha, S. S. Singh, E-Wen Huang, Y-Jen Chang, A-Chou Yeh, J. Jain, S. Neelakantan, Aging temperature role on precipitation hardening in a non-equiatomic AlCoCrFeNiTi high-entropy alloy, Materials Science and Technology, (2021) 1-10.
  43. U. Reddy, D. Dubey, S. Sanket Panda, N. Ireddy, J. Jain, K. Mondal, S. S. Singh, Effect of Surface Roughness Induced by Milling Operation on the Corrosion Behavior of Magnesium Alloys., Journal of Materials Engineering and Performance, Accepted (2021) https://doi.org/10.1007/s11665-021-05933-8
  44. N. Ansari, S. Y. Lee, S. S. Singh, J. Jain, Influence of yttrium-induced twinning on the recrystallization behavior of magnesium alloys, Journal of Materials Science, 56 (32) (2021) 18258-18271.
  45. V. Mandal, S. Sharma, S. S. Singh, ‪J. Ramkumar, Laser Surface Texturing in Powder Bed Fusion (PBF): Numerical Simulation and Experimental Characterization, Metals and Materials International, (2021) 1-6.
  46. R. Sarvesha, Ubaid-ur-Rehman Ghori, G. Thirunavukkarasu, Y. L. Chiu, I. P. Jones, J. Jain, S. S. Singh, A study on the phase transformation of γ2-Al8Mn5 to LT-Al11Mn4 during solutionizing in AZ91 alloy, Journal of Alloys and Compounds, 873 (2021) 159836.
  47. A. Prasad, Y. L. Chiu, I. P. Jones, S. S. Singh, N. N. Goswami, J. Jain, Role of La addition for enhancing the corrosion resistance of Mg-Dy alloy, Corrosion Engineering Science and Technology, Accepted (2021) https://doi.org/10.1080/1478422X.2021.1922811
  48. A. Gokhale, R. Sarvesha, T. S. Guruprasad, S. S. Singh, J. Jain, Tailoring the surface microstructure and texture in pure zinc, Materials Science and Engineering A, 816 (2021) 141258.
  49. R. Sarvesha , J. Bhagyaraj, S. Bhagavath, S. Karagadde, J.Jain, S. S. Singh , 2D and 3D characteristics of intermetallic particles and their role in fracture response of AZ91 magnesium alloy, Materials Characterization, 171 (2021), 110733
  50. V. Nandal, R. Sarvesha, S. S. Singh, E-Wen Huang, Y-J Chang, A-C Yeh, S. Neelakantan, J. Jain, Influence of pre-deformation on the precipitation characteristics of aged non-equiatomic Co1.5CrFeNi1.5 high entropy alloys with Ti and Al additions, Journal of Alloys and Compounds, 855 (2021) 157521
  51. C‐Chieh Huang, Tu‐Ngoc Lam, L. Amalia, K‐Hung Chen, K‐Yi Yang, M. R. Muslih, S. S. Singh, P‐I. Tsai, Y‐Tzu Lee, J. Jain, S. Yeol Lee, H‐Jen Lai, W‐Chin Huang, S‐Yuan Chen, E‐Wen Huang, Tailoring grain sizes of the biodegradable iron‐based alloys by pre‐additive manufacturing microalloying, Tailoring grain sizes of the biodegradable iron‐based alloys by pre‐additive manufacturing microalloying, Scientific Reports (2021)
  52. A. Zindal, H. Vashishtha, S. S. Singh, R. Prasad, J. Jain, Effect of cooling rates from solution treatment temperature on aging response and fracture behavior of a Mg-8Al-0.5Zn alloy, Metals and Materials International (2021) https://doi.org/10.1007/s12540-020-00911-6
  53. R. Sarvesha, A. Gokhale, K. Kumar, N. K. Sharma, J. Jain, S. S. Singh, Effect of crystal orientation on indentation-induced deformation behavior of zinc, Materials Science and Engineering: A, 776 (2020) 139064.
  54. D. Dubey, K. Kadali, S. S. Panda, A. Kumar, J. Jain, K. Mondal, S. S. Singh, Comparative Study on the Stress Corrosion Cracking Susceptibility of AZ80 and AZ31 Magnesium Alloys, Materials Science and Engineering A, 792 (2020) 139793.
  55. N. Ansari, R Sarvesha, S. Y. Lee, S. S. Singh, J. Jain, Influence of yttrium addition on recrystallization, texture and mechanical properties of binary Mg-Y alloys, Materials Science and Engineering A, 793 (2020) 139856.
  56. A. Prasad, S. Si, U-ur-Rehman Ghori, G. Thirunavukkarasu, Y. L. Chiu, I. P. Jones, S. Y. Lee, S. S. Singh, N. N. Gosvami, J. Jain, Effect of La addition on precipitation hardening in Mg-10Dy alloy, Materialia (2020), 14 (2020) 100898.
  57. R. Sarvesha, Y. L. Chiu, I. P. Jones, S. S. Singh, J. Jain, Mechanical property evaluation of second phase particles in a Mg–8Al-0.5 Zn alloy using micropillar compression, Materials Science and Engineering: A, 775 (2020) 138973.
  58. N. Ansari, B. Tran, W. J. Poole, S. S. Singh, K. Hariharan, J. Jain, High temperature deformation behavior of Mg-5wt.% Y binary alloy: Constitutive analysis and processing maps, Materials Science and Engineering: A, 777 (2020) 139051.
  59. P. Setia, A. Anand, T. Venkateswaran, T. Tharrian, S. S. Singh, K. Mondal, S. Shekhar, Effect of heat-treatment on the microstructure evolution and sensitization behavior of high-silicon stainless steel, Journal of Materials Engineering and Performance, 29 (2020) 6014-6024.
  60. V. Nandal, R Sarvesha, S. S. Singh, E-Wen Huang, Y-Jen Chang, An-Chou Yeh, S. Neelakantan, J. Jain, Enhanced age hardening effects in FCC based Co1.5CrFeNi1.5 high entropy alloys with varying Ti and Al contents, Materialia, 13 (2020) 100823
  61. D. Dubey, K. Kadali, H. Kancharla, A. Zindal, J. Jain, K. Mondal, S. S. Singh, Effect of Precipitate Characteristics on the Corrosion Behavior of a AZ80 Magnesium Alloy, Metals and Materials International (2020) https://doi.org/10.1007/s12540-020-00764-z.
  62. R. Yuan, S. S. Singh, J. Oswald, N. Chawla, Fracture Analysis of Particulate Metal Matrix Composite using X-ray Tomography and Extended Finite Element Method (XFEM), Journal of Composites Science 4(2) 62 (2020).
  63. A. S. S. Singaravelu, J. J. Williams, H. D. Goyal, S. Niverty, S. S. Singh, T. J. Stannard, X. Xiao, N. Chawla, 3D time-resolved observations of fatigue crack initiation and growth from corrosion pits in Al 7XXX alloys using in situ synchrotron x-ray tomography, Metallurgical and Materials Transactions A 51 (1) (2020) 28-41.
  64. K. Kadali, D. Dubey, Sarvesha R, H. Kancharla, J. Jain, K. Mondal, S. S. Singh, Dissolution kinetics of Mg17Al12 eutectic phase and its effect on corrosion behavior of as-cast AZ80 magnesium alloy, JOM, 71 (2019) 2209-2218.
  65. Sarvesha R, W. Alam, A. Gokhale, Guruprasad, S. Bhagavath, S. Karagadde, J. Jain, S. S. Singh, Quantitative assessment of second phase particles characteristics and its role on the deformation response of a Mg-8Al-0.5Zn alloy, Materials Science and Engineering A, 759 (2019) 368-379.
  66. A. Gokhale, Sarvesha R, E-W Huang, S. Y. Lee, R. Prasad, S. S. Singh, J. Jain, Quantitative evaluation of grain boundary sliding and its dependence on orientation and temperature in pure Zn, Materials Letters, 246 (2019) 24-27.
  67. A. Gokhale, Sarvesha R, R. Prasad, S. S. Singh, J. Jain, A novel approach to refine surface grains in pure Zinc using indentation scratch, Materials Letters, 247 (2019) 151-154.
  68. R. Sonkusare, A. Swain, M. R. Rahul, S. Samal, N. P. Gurao, K. Biswas, S. S. Singh, N. Nayan, Establishing processing-microstructure-property paradigm in complex concentrated equiatomic CoCuFeMnNi alloy, MSEA, 759 (2019) 415-429.
  69. S. Singh, H. Li, S. S. Singh, J. Williams, T. Stannard, X. Xiao, Y. Jiao, N. Chawla, Microstructural characterization and mechanical property prediction of a polymer matrix composite by X-ray synchrotron tomography and spatial correlation functions, SN Applied Sciences, 1 (10) (2019) 1302.
  70. Gaurav, Sarvesha R, S. S. Singh, J. Jain, R. Prasad, Study of static recrystallization behavior of a Mg-6Al-3Sn alloy, Journal of Materials Engineering and Performance, 28 (2019) 3468-3477.
  71. A. Gokhale, Sarvesha R, R. Prasad, S. S. Singh, J. Jain, Effect of grain orientation on indentation induced creep in pure zinc, Journal of Engineering Materials and Technology, 141(4) (2019) 041014-1:6.
  72. T. J. Stannard, J. J. Williams, S. S. Singh, A. S. S. Singaravelu, X. Xiao, N. Chawla, 3D time-resolved observations of corrosion and corrosion-fatigue crack initiation and growth in peak-aged Al 7075 using synchrotron X-ray tomography, Corrosion Science, 138 (2018) 340-352.
  73. A. Zindal, J. Jain, R. Prasad, S. S. Singh, R. Sarvesha, P. Cizek, M. R. Barnett, Effect of heat treatment variables on the formation of precipitate free zones (PFZs) in Mg-8Al-0.5 Zn alloy, Materials Characterization, 136 (2018) 175-182.
  74.  C. S. Kaira, V. De Andrade, S. S. Singh, C. Kantzos, A. Kirubanandham, F. De Carlo, N. Chawla, Probing novel microstructural evolution mechanisms in aluminum alloys using four-dimensional nanoscale characterization, Advanced Materials, 29 (41) (2017) 1703482.
  75.  S. S. Singh, T. J. Stannard, X. Xiao, N. Chawla, In Situ X-ray microtomography of stress corrosion cracking and corrosion-fatigue in aluminum alloys, JOM, 69 (2017) 1404-1414.
  76.  A. Zindal, J. Jain, R. Prasad, S. S. Singh, P. Cizek, Correlation of grain boundary precipitate characteristics with fracture and fracture toughness in an Mg-8Al-0.5Zn alloy, Materials Science and Engineering A, 706 (2017) 192-200.
  77. C. S. Kaira, V. De Andrade, S. S. Singh, C. Kantzos, A. Kirubanandham, F. De Carlo, N. Chawla, Understanding nanoscale 4D microstructural evolution in aluminum alloys using transmission X-ray microscopy (TXM), Microscopy and Microanalysis, 23 (2017) 2220-2221. 
  78.  R. Vallabhaneni, E. Ezadi, C. R. Mayer, C. S. Kaira, S. S. Singh, J. Rajagopalan, N. Chawla, In situ tensile testing of tin (Sn) whiskers in a Focused Ion Beam (FIB)/Scanning Electron Microscope (SEM), Microelectronics Realibility, 79 (2017) 314-320.
  79.  X. Wang, S. S. Singh, T. Ma, C. Lv, N. Chawla, H. Jiang, Quantifying electrochemistry reactions and properties of amorphous silicon in a conventional lithium-ion battery configuration, Chemistry of Materials, 29 (2017) 5831-5840.
  80.  S. Chakravarty, K. Sikdar, S. S. Singh, D. Roy, C. C. Koch, Grain size stabilization and strengthening of cryomilled nanostructured Cu-12at. % Al alloy, Journal of Alloys and Compounds, 716 (2017) 197-203.
  81. A. Zindal, J. Jain, R. Prasad, S. S. Singh, Effect of pre-strain and grain size on the evolution of precipitate free zones (PFZs) in a Mg-8Al-0.5Zn alloy, Materials Letters, 201 (2017) 207-210.
  82.  E. Guo, S. S. Singh, C. Mayer, X. Meng, Y. Xu, L. Luo, M. Wang, N. Chawla, Effect of Gallium addition on the microstructure and micromechanical properties of constituents in Nb-Si based alloys, Journal of Alloys and Compounds 704 (2017) 89-100.
  83.  S. Jain, A. Gokhale, J. Jain, S. S. Singh, K. Hariharan, Fatigue behavior of aged and solution treated AZ61 Mg alloy at small length scale using nanoindentation, Materials Science and Engineering: A, 684 (2017) 652-659. 
  84.  E. Guo, S. S. Singh, C. S. Kaira, X. Meng, Y. Xu, L. Luo, M. Wang, N. Chawla, Mechanical properties of microconstitents in Nb-Si-Ti alloy by micropillar compression and nanoindentation, Materials Science and Engineering A, 687 (2017) 99-106.
  85.  R. Yuan, S. S. Singh, N. Chawla, J. Oswald, Geometry segmentation of voxelized representations of heterogeneous microstructures using betweenness centrality, Materials Characterization, 118 (2016) 553-559.
  86. C. S. Kaira, S. S. Singh, A. Kirubanandham, N. Chawla, Microscale behavior behavior of bicrystal boundaries in pure tin (Sn) using micropillar compression, Acta Materialia, 120 (2016) 56-67.
  87. S. S. Singh, J. J. Loza, A. P. Merkle, N. Chawla, Three dimensional microstructural characterization of nanoscale precipitates in AA7075-T651 by Focused Ion Beam (FIB) Tomography, Materials Characterization, 118 (2016) 102-111.
  88. S. S. Singh, J. J. Williams, T. Stannard, X. Xiao, F. De Carlo, N. Chawla, Measurement of localized corrosion rates at inclusion particles in AA7075 by in situ three dimensional (3D) X-ray synchrotron tomography, Corrosion Science, 104 (2016) 330-335.
  89.  S. S. Singh, M. A. Jansen, N. M. Franz, N. Chawla, Microstructure and nanoindentation of the rostrum of Curculio longinasus Chittenden, 1927 (Coleoptera: Curculionidae), Materials Characterization, 118 (2016) 206-211.
  90.  T. Lai, S. S. Singh, A. S. S. Singaravelu, K. S. Vadari, N. Chawla, M. L. Lind, Hydrogen permeability and mechanical properties of NiNb-X(X=Sn,Ti and Zr) amorphous metallic membranes, Journal of Alloys and Compounds, 684 (2016) 359-365.
  91. C. Mayer, Y, Lingwei, S. S. Singh, J. Molina-Aldareguia, Y. L. Shen, N. Chawla, Anisotropy, size and aspect ratio effects in micropillar compression of Al-SiC nanolaminate composites, Acta Materialia, 168 (2016) 129-133.
  92. M. A. Jansen, S. S. Singh, N.M. Franz, N. Chawla, A multilayer micromechanical model of the cuticle of Curculio longinasus Chittenden, 1927 (Coleoptera: Curculionidae), Journal of Structural Biology, 195 (2016) 139-158.
  93. S. Das, A. Maroli, S. S. Singh, T. Stannard, X. Xiao, N. Chawla, N. Neithalath, A microstructure-guided constitutive modeling approach for random heterogeneous materials: application to structural binders, Computational Materials Science, 119 (2016) 52-64.
  94. C. Mayer, Y. Lingwei, S. S. Singh, H. Xie, Y.L. Shen, J. Llorca, J. Molina-Aldareguia, N. Chawla. Orientation Dependence of Indentation Behavior in Al-SiC Nanolaminate Composites, Materials Letters, 168 (2016) 129-133.
  95. S. S. Singh, E. Guo, H. Xie, N. Chawla, Mechanical properties of intermetallic inclusions in Al 7075 alloys by micropillar compression, Intermetallics, 62 (2015) 69-75.
  96. B. M. Patterson, N. L. Cordes, K. Henderson, J. J. Williams, T. Stannard, S. S. Singh, A. Rodriguez Ovejero, X. Xiao, M. Robinson, N. Chawla, In situ X-ray Synchrotron Tomographic Imaging during the Compression of Hyperelastic Polymeric Materials, Journal of Materials Science, 51 (2016) 171-187. (cover image) (50th Anniversary Issue; also finalist for 2016 Cahn Prize).
  97. S. Das, P. Yang, S. S. Singh, J. Mertens, X. Xiao, N. Chawla, N. Neithalath, Effective properties of a fly ash geopolymer: synergistic application of x-ray synchrotron tomography, nanoindentation, and homogenization models, Cement and Concrete Research, 78 (2015) 252-262.
  98. S. S. Singh, J. J. Williams, M. Lin, X. Xiao, F. De Carlo, N. Chawla, In Situ investigation of high humidity stress corrosion cracking of 7075 aluminum alloy by three-dimensional (3D) X-ray synchrotron tomography, Materials Research Letters, 2 (4) (2014) 217-220.
  99. S. S. Singh, C. Schwartztein, J. J. Williams, X. Xiao, F. De Carlo, N. Chawla, 3D microstructural characterization and mechanical properties of constituents particles in Al7075 alloys using x-ray synchrotron tomography and nanoindentation, Journal of Alloys and Compounds, 602(2014)163-174.
  100. S. S. Singh, J. J. Williams, P. Hruby, X. Xiao, F. De Carlo, N. Chawla, In situ experimental techniques to study the mechanical behavior of materials using x-ray synchrotron tomography, Integrating Materials and Manufacturing Innovation, (2014) 3-9.
  101. S. S. Singh, R. Sarkar, H. Xie, C. Mayer, J. Rajagopalan, N. Chawla, Tensile behavior of single crystal tin whiskers, Journal of Electronic Materials, 43 (2014) 978-982.
  102. P. Hruby, S. S. Singh, J. J. Williams, X. Xiao, F. De Carlo, N. Chawla, Fatigue crack growth in SiC particle reinforced Al alloy matrix composites at high and low R-ratios by in situ x-ray synchrotron tomography, International Journal of Fatigue, 68 (2014) 136-143.
  103. R. Yuan, S. S. Singh, N. Chawla, J. Oswald, Efficient methods for implicit geometrical representation of complex material microstructures, International Journal for Numerical Methods in Engineering, 98 (2014) 79-91.
  104. E. Guo, H. Xie, S. S. Singh, A. Kirubanandham, T. Jing, N. Chawla, Mechanical characterization of microconstituents in a cast duplex stainless steel by micropillar compression, Materials Science and Engineering A, 598 (2014) 98-105.
  105. E. Guo, S. S. Singh, H. Xie, J. J. Williams, T. Jing, N. Chawla, Microstructure-based modeling of deformation in steels based on constitutive relationships from micropillar compression, Steel Research International, 85 (2014) 946-953.
  106. A. P. Merkle, L. Lechner, A. Steinbach, J. Gelb, M. Kienle, M. W. Phaneuf, D. Unrau, S. S. Singh, N. Chawla, Automated correlative tomography using XRM and FIB-SEM to span length scales and modalities in 3D materials, Microscopy and Analysis, 28 (7) (2014) S10-S13.
  107. T. D. Prichard, S. S. Singh, N. Chawla, B. D. Vogt, Flocculated carbon nanotube composites for solvent resistant soft templated microfeatures, Polymer, 54 (2013) 1130-1135.
  108. S. S. Singh, J. J. Williams, Y. Jiao, N. Chawla, Modeling anisotropic multiphase heterogeneous materials via directional correlation functions: Simulations and experimental verification, Metallurgical and Materials Transactions A, 43 (2012) 4470-4474.
  109. D. Roy, R. Mitra, O. A. Ojo, S. S. Singh, D. Kolesnikov, W. Lojkowski, R. O. Scattergood, C. C. Koch, I. Manna, Evaluation of mechanical properties of partially amorphous and nanocrystalline Al50Ti40Si10 composites prepared by mechanical alloying and hot isostatic pressing, Materials Science and Engineering A, 555 (2012) 21-27.
  110. S. S. Singh, D. Roy, R. Mitra, R. V. Subba Rao, R. K. Dayal, Baldev Raj, I. Manna, Studies on laser sintering of mechanically alloyed Al50Ti40Si10 composite, Materials Science and Engineering A, 501 (2009) 242-247.
  111. D. Roy, S. S. Singh, B. Basu, W. Lojkowski, R. Mitra, I. Manna, Studies on wear behavior of nano-intermetallic reinforced Al-base amorphous/nanocrystalline matrix in-situ composite, Wear, 266 (2009) 1113-1118.
  112. D. Roy, S. S. Singh, R. Mitra, M. Rosiński, A. Michalski, W. Łojkowski, I. Manna, Synthesis and characterization of precipitation hardened amorphous matrix composite by mechanical alloying and pulse plasma sintering of Al65Cu20Ti15, Philosophical Magazine, 89 (2009) 1051-1061.

Patent (01)


  1. S. Bajpai, A. Bhadauria, T. Venkateswaran, S. S. Singh, K. Balani, Joining of HfB 2 -ZrB 2 based UHTCs using Ni-Interlayer, Filed

Edited Book (01)


  1. New Horizons in Metallurgy, Materials, and Manufacturing, Springer, Editors: A. Arora, A. Shrivastava, C. Srivastava, N. Dhawan, S. S. Singh, (2022)

Book Chapter (03)


  1. R Sarvesha, S. S. Singh and N. Chawla, Fatigue deformation mechanisms in metals elucidated by in situ X-ray microtomography, in Cyclic Loading & Fatigue, Comprehensive Structural Materials, Elsevier, (2023).

  2. R. Sarvesha, S. S. Singh, In-situ micromechanical testing in scanning electron microscopy, Electron Microscopy in Science and Engineering, IITK Directions, Springer, (2021).

  3. S. S. Singh and N. Chawla, 3D/4D X-ray Tomography: Probing the mechanical properties of materials, Handbook of Mechanics of Materials (Springer), 1-21 (2018).


Conference Proceedings (05)


  1. S. S. Panda, S. Sahni, M. Subhakar, J. Jain, S. S. Singh, Microstructure and Mechanical Properties of Dual Two-Phase (B2+D024) Ti45Fe5Ni50 Intermetallic Alloy, AMPCO 2022: 3rd International Conference on Advances in Materials Processing: Challenges and Opportunities, Roorkee, India (2022).

  2. R. Sarvesha, W. Alam, J. Jain, S. S. Singh, Role of second phase particles on in-situ deformation of an AZ80 Mg alloy, Application of Microscopy in Materials and Life Sciences-Proceedings of 12th Asia-Pacific Microscopy Conference (AMPC12), Hyderabad, India (2020).

  3. S. S. Singh, R. Yuan, J. Oswald, N. Chawla, Damage evolution in Al-SiC composites by X-ray synchrotron tomography and extended finite element modeling (X-FEM), 20th International Conference on Composite Materials (ICCM20), Copenhagen, Denmark, (2015).

  4. S. Das, P. Yang, S. S. Singh, N. Chawla, and N. Neithalath, Microstructure-based modeling of effective properties of fly ash-based geopolymeric systems, Proceedings of the 2nd International ACI India Chapter conference on Advances in Concrete, Mumbai, (2015).

  5. S. S. Singh, J. J. Williams, P. Hruby, J. C. E. Mertens, A. Kirubanandham, N. Chawla, X. Xiao, F. De Carlo, Image analysis of time-evolved x-ray microtomography data sets using Avizo Fire, Americas Amira-Avizo user group Meeting (AAAUGM), (2014).

  6. S. S. Singh, J. J. Williams, X. Xiao, F. De Carlo, N. Chawla, In situ three dimensional (3D) x-ray synchrotron tomography of corrosion fatigue in Al7075 alloy, Fatigue of Materials II: Advances and Emergences in Understanding, (2012) 17-25.


Industrial Reports (03)


  1. K. Harikrishna, G. K. Mandal, S. S. Singh, K. Mondal, Corrosion behavior of commercially available galvanized steels, IIM Metal News, 25 (2022) 17-24.

  2. S. S. Singh, T. K. Roy, P. K. Pandey, J. Chakraborty, V. V. Mahashabe and T. Venugopalan, A study on establishing centerline porosity index and effect of casting parameters in continuously cast billets, Tata Search, 2 (2010) 269-272.

  3. J. Chakraborty, P. N. Choubey, D. K. Singh, S. S. Singh, T. Venugopalan, Studies on correlation of rim thickness of TMT re-bars with mechanical properties, Tata Search, 2 (2010) 333-336.



Conference Presentations (96) (Till June 2022)


  1. S. Panda, J. Jain, S. S. Singh, Mechanical behavior of Ti-Ni-Fe based B2 Pseudo Binary intermetallic at different length scales, TMS 2022
  2. E-Wen Huang, S. S. Singh, W-J Lee, C-Yu Lee, H-Hsuan Chin, P. Kumar, P. Liaw, Bi-Hsuan Lin, Machine-Learning and High-Throughput Studies for High-Entropy Materials: Building Beyond & Above, TMS 2022
  3. S. Panda, J. Jain, S. S. Singh, Effect of ordered Ni3Ti on the deformation behavior of Ti-Fe-Ni based pseudo binary B2 intermetallic, 3rd Indian Materials Conclave and 32nd Annual General meeting of MRSI
  4. S. S. Singh, Role of Second Phase Particles on the Deformation and Corrosion Behavior of Magnesium Alloys, 3rd Indian Materials Conclave and 32nd Annual General meeting of MRSI (Invited)
  5. P. Setia, T. Venkateswaran, K. Thomas Tharian, S. Mukherjee, S. S. Singh, S. Shekhar, Hot deformation behavior of high-silicon stainless steel, ICAMMC2021(Winner)
  6. S. Panda, J. Jain, S. S. Singh, Mechanical behavior of Ti-Ni-Fe & Ti-Fe-Co based B2 pseudo binary intermetallic at different length scales, IIM-ATM 2021 (Winner)
  7. K. Harikrishna, G. K. Mandal, S. S. Singh, K. Mondal, Effect of annealing time on coating microstructure evolution and electrochemical behavior of galvannealed interstitial free steel, IIM-ATM 2021
  8. G. Gupta, J. Jain, S. S. Singh, Study on role of RE elements addition in deformation behaviour of Magnesium alloy, IIM-ATM 2021
  9. P. Setia, K. Thomas Tharian, T. Venkateswaran, S. S. Singh, S. Shekhar, Tribological characterization of silicon stainless steel alloys, MS&T 2021.
  10. S. S. Singh, Microstructure property correlation in magnesium alloys, 2nd Golden Jubilee Webinar of ARP of AR&DB, Advances in Aeronautical Materials, Systems & Technologies, organized by AR & DB, ASM International and DMSRDE (2021) (Invited)
  11. S. Bajpai, A. Bhadauria, T. Venkateswaran, S. S. Singh, K. Balani, Spark plasma joining of HfB2-ZrB2-SiC composites using Ni as a filler, MS&T 2021.
  12. P. Setia, T. Tharrian, T. Venkateswaran, S. S. Singh, S. Shekhar Micromechanical behavior of silicon stainless steel alloys using in-situ EBSD, Euromat – 2021
  13. S. Panda, J. Jain, S. S. Singh, Deformation behavior of Ti-Ni-Fe based ternary B2 Pseudo Binary intermetallic, MS&T 2021.
  14. A. Kumar, J. Bhagyaraj, S. Mukherjee, K. Biswas, S. S. Singh, Development of nano (yttria and lanthana) dispersed duplex stainless steel, Euromat – 2021
  15. V. Nandal, R Sarvesha, S. S. Singh, J. Jain, S. Neelakantan, Precipitation coarsening behavior of γʹ precipitates in non-equiatomic AlCoCrFeNiTi high entropy alloy subjected to different aging temperatures” Metals 2021, Brno Czech Republic, Europe (2021)
  16. G. Shit, S. S. Singh, Mariyappan K, S. Ningshen, Role of grain size and grain boundary microstructure in controlling sensitization and intergranular corrosion of AISI type 304L stainless steel, ASIA STEEL 2021
  17. A. Kumar, K. Biswas, S. S. Singh, Processing and characterization of oxide dispersion strengthened CoFeMnNiV high-entropy alloy, IWHEM 2020
  18. P. Setia, R Sarvesha, A. Gokhale, T. Tharrian, T. Venkateswaran, S. S. Singh, S. Shekhar, Microstructural and mechanical characterization of cast austenitic stainless steel alloyed with Si TMS, San Diego (2020)
  19. S. Bajpai, S. S. Singh, K. Balani, Effect of B4C addition on (Hf,Zr)B2 based Ultra high temperature ceramics, TMS, San Diego (2020)
  20. A. Sundar, J. Williams, H. Goyal, S. Niverty, S. S. Singh, T. Stannard, X. Xiao, N. Chawla, In-situ X-ray microtomography to elucidate corrosion-fatigue mechanisms in aluminum alloys, TMS, San Diego (2020)
  21. H. Kancharla, G. K. Mandal, S. S. Singh, K. Mondal, Effect of strip entry temperature on the development of interfacial layer and its correlation with corrosion properties of galvanized steel, NMD-ATM, IIT Bombay, India (2020).
  22. R. Sarvesha, Ubaid-Ur-Rehman Ghori, Yu Lung Chiu, Ian P. Jones, S. S. Singh, J. Jain, Al8Mn5 and Mg17Al12 intermetallic particles in AZ80 (Mg-8wt.%Al-0.5wt.%Zn), Proceeding of 12th Asia-Pacific Microscopy Conference, India (2020).
  23. S. Bajpai, T. Venkateswaran, S. S. Singh, K. Balani, Study on sintering and oxidation resistance of HfB2-ZrB2-B4C based Ultra High-Temperature Ceramics, NMD ATM, IIT Bombay, India (2020). 
  24. R Sarvesha, W. Alam, J. Jain, S. S. Singh, Role of second phase particles on in-situ deformation of an AZ80 Mg alloy, Proceeding of 12th Asia-Pacific Microscopy Conference, India (2020) (Poster)
  25. Sarvesha R, W. Alam, A. Gokhale, Guruprasad T, S. Bhagavath, S. Karagadde, J. Jain, S. S. Singh, Effect of second phase particles on the mechanical behavior of AZ80 magnesium alloy, MRSI, Bangalore, India (2019) (Invited)
  26. S. S. Singh, Quantitative assessment of second phase particles characteristics and its role on the deformation response of a Mg-8Al-0.5Zn alloy, National Conference on the Advancement in Materials Processing Technology (AMPT), (2019) (Invited)
  27. V. Nandal, R Sarvesha, S. S. Singh, J. Jain, S. Neelakantan, Effect of pre-strain on the aging response of non-equimolar AlCoCrFeNiTi high entropy alloy, The Minerals, Metals & Materials Society (TMS) World Congress on High Entropy Alloys (HEA 2019), Seattle, Washington, USA (2019).
  28. A. Kumar, N. Kumar, Sarvesha R, K. Biswas, S. S. Singh, Processing and characterization of lanthana based ODS steel for nuclear reactor applications, ISMANAM 2019, Chennai, India (2019) (Poster)
  29. A. Gokhale, R. Sarvesha, R. Prasad, S. S. Singh, J. Jain, Grain scale creep response in Zinc through nanoindentation, 27th International Conference on Metallurgy and Materials (METAL 2018), Brno, Czechia (2018)
  30. V. Nandal, R. Sarvesha, S. S. Singh, J. Jain, S. Neelakantan, Precipitation hardening of non-equiatomic CoCrFeNiTi high entropy alloy, Graduate Program for Mechanical Systems Innovation and Global Leader Program for Social Design and Management, University of Tokyo (2018)
  31. A. Kumar, N. Kumar, K. Biswas, S. S. Singh, Processing and characterization of 14YWT ODS steel, ICAMPS 2018, Trivandram, India (2018) (Poster)
  32. K. Kadali, D. Dubey, Sarvesha R, K. Harikrishna, J. Jain, K. Mondal, S. S. Singh, Effect of solutionization on corrosion behaviour of as-cast AZ80 Mg alloy, NMD-ATM 2018, Kolkata, India (2018) (Poster)
  33. D. Dubey, K. Kadali, S. S. Singh, K. Mondal, J. Jain, Effect of aging on the corrosion behaviour of AZ80 Magnesium alloy in 3.5% NaCl solution’ NMD-ATM 2018, Kolkata, India (2018) (Poster)
  34. A. Kumar, N. Kumar, Sarvesha R, K. Biswas, S. S. Singh, Processing and characterization of 14YWT and 14LWT ODS steel: A Comparative Study, NMD-ATM 2018, Kolkata, India (2018) (Poster)
  35. P. Setia, A. Anand, A. Kumar, S. S. Singh, S. Shekhar, K. Mondal, T. Venkateswaran, S. T. Tharrian, Effect of heat-treatment on the microstructure evolution of high-silicon stainless steel, ICAMPS 2018, Trivandrum, India (2018) (Poster)
  36. P. Setia, S. Shekhar, S. S. Singh, T. Venkateswaran, S. T. Tharrian, Microstructural evolution of high silicon stainless steel, NMD-ATM 2018, Kolkata, India (2018) (Poster)
  37. S. S. Panda, D. Dubey, J. Jain, S. S. Singh, Effect of aging treatment on the fatigue behavior of as cast AZ80 magnesium alloy, NMD-ATM 2018, Kolkata, India (2018) (Poster)
  38. R Sarvesha, S. S. Singh, Understanding the effect of second-phase particles on the mechanical behavior of AZ80 magnesium alloy, Research Scholar Day (RSD), IIT Kanpur, India (2018)
  39. P. Setia, A. AnandK. Mondal, S. Shekhar, S. S. Singh, T. Venkateswaran, K. T. Tharian, Effect of precipitates on mechanical and sensitization behavior of FeSi alloyMicrostructural engineering, IIT Kanpur, India (2018).
  40. A. Gokhale, Sarvesha R, S. S Singh, R. Prasad, J. Jain, Investigating grain scale creep response in zinc through nano-indentation, 55th National Metallurgists’ Day and 71st Annual Technical Meeting, BITS Goa, India (2017) (Best Poster).
  41. A. K. Gupta, Sarvesha R, A. Kumar, G. Telasang, G. Padmanabham, I. Manna, S. S. Singh, Laser processing of Ni-Cr alloys, NMD-ATM 2017, Goa, India (2017) (Short Presentation)
  42. Sarvesha R, A. Gokhale, J. Jain, S. S. Singh, Microscale study of magnesium alloy AZ80, NMD-ATM 2017, Goa, India (2017) (Poster)
  43. S. S. Singh, N. Chawla, X. Xiao, Understanding deformation behavior of materials by in situ X-ray synchrotron tomography, IUMRS International Conference in Asia, Taipei, Taiwan (2017) (Invited)
  44. S. S. Singh, N. Chawla, X. Xiao, In situ synchrotron tomography to understand deformation behavior of materials, Theme meeting on X-ray micro-imaging using synchrotron radiation and its application, RRCAT, Indore, India (2017) (Invited)
  45. C. S. Kaira, V. De Andrade, S. S. Singh, C. Kantzos, F. De Carlo, N. Chawla, Probing 4D microstructural evolution in aluminum alloys using transmission X-ray microscopy (TXM), 3rd International Conference on Tomography of Materials and Structures (ICTMS2017), Lund, Sweden
  46. S. S. Singh, N. Chawla, X. Xiao, 4D materials science: understanding deformation behavior using in situ X-ray tomography, International Conference of Young Researchers on Advanced Materials (ICYRAM), Banglore, India, (2016) (Invited)
  47. C. S. Kaira, S. S. Singh, C. Kantzos, A. Kirubanandham, V. De Andrade, F. De Carlo, N. Chawla, 3D microstructural characterization of aluminum alloys using transmission X-ray microscopy (TXM), MRS Spring Meeting, PHX, AZ, (2017).
  48. C. S. Kaira, S. S. Singh, C. Kantzos, A. Kirubanandham, V. De Andrade, F. De Carlo, N. Chawla, Nanoscale 4D microstructural evolution of precipitates in aluminium alloys using transmission X-ray microscopy (TXM), TMS Annual Meeting, San Diego, CA, USA (2017).
  49. T. J. Stannard, S. Niverty, S. S. Singh, J. J. Williams, N. Chawla, X. Xiao, P. Kenesei, J. Almer, F. De Carlo, Microstructural and Environmental Effects on Stress Corrosion and Corrosion-Fatigue of 7075 Aluminum Alloy, American Society of Mechanical Engineers – International Mechanical Engineering Conference and Exposition, Phoenix, AZ, (2016).
  50. S. S. Singh, T. Stannard, S. Niverty, J. J. Williams, X. Xiao, F. De Carlo, N. Chawla, Microstructural and environmental effects on stress corrosion and corrosion fatigue of 7075 aluminum alloy, Environmental Damage in Structural Materials, Cork, Ireland, (2016).
  51. X. Wang, S. S. Singh, N. Chawla, H. Jiang, Direct measurements of Li-Si composition, volume expansion and modulus variation of amorphous Si after electrochemical lithiation, ASME IMECE, PHX, AZ, (2016).
  52. T. Stannard, S. S. Singh, A. S. S. Sundar, J.J. Williams, N. Chawla, X. Xiao, F. De Carlo, In situ synchrotron x-ray tomography investigation of corrosion-fatigue crack behavior of 7075 aluminium alloys, International conference on fatigue damage of structural materials XI, Hyannis, MA, (2016).
  53. T. Stannard, S. S. Singh, J. J. Williams, A. S. S. Singaravelu, C. Mayer, X. Xiao, F. De Carlo, N. Chawla, 4D in situ study of fatigue crack initiation and growth from corrosion pits in 7075 aluminum alloys, International Materials Research Congress XXV, Cancun, MX, (2016).
  54. T. Stannard, S. S. Singh, A. S. S. Sundar, S. Niverty, J.J. Williams, N. Chawla, X. Xiao, F. De Carlo, In situ three dimensional study of corrosion fatigue crack initiation and growth of corroded 7075 aluminum alloys, Environmental Damage in Structural Materials, Cork, Ireland, (2016) (poster).
  55. T. Stannard, S. S. Singh, J. J. Williams, A. S. S. Singaravelu, C. Mayer, X. Xiao, D. De Carlo, N. Chawla, 4D in situ study of fatigue crack initiation and growth from corrosion pits in 7075 aluminum alloys, MRS Spring Meeting, PHX, AZ, (2016). (Best Poster Award)
  56. C. S. Kaira, V. De Andrade, S. S. Singh, A. Kirubanandham, C. Kantzos, F. De Carlo, N. Chawla, Nanoscale 3D microstructural characterization of aluminium alloys using transmission x-ray microscopy (TXM), MRS Spring Meeting, PHX, AZ, (2016).
  57. T. L. Burnett, S. S. Singh, S.A. McDonald, N. J. H. Holroyd, P. J. Withers, N. Chawla, Competition of stress corrosion crack branches observed in-situ using time-lapse 3D synchrotron computed tomography, Environmental Damage in Structural Materials 2016, Cork, Ireland, (2016).
  58. S. Das, S. S. Singh, N. Chawla, N. Neithalath, Nanoindentation to extract phase properties of fly ash geopolymers for macroscale predictions, ACI Fall convention, Philadelphia, (2016).
  59. P. Hruby, S. S. Singh, R. Yuan, J. Williams, J. Oswald, X. Xiao, N. Chawla, Characterization of damage evolution in SiC particle reinforced Al matrix composites by x-ray tomography and extended finite element modeling, TMS Annual Meeting, Nashville, TN, (2016).
  60. C. S. Kaira, S. S. Singh, V. De Andrade, F. De Carlo, N. Chawla, In situ characterization of nanoscale precipitate nucleation and growth in aluminum alloys using transmission x-ray microscopy (TXM), 3D Materials Science, St. Charles, IL, (2016).
  61. A. Merkle, N. Chawla, S. S. Singh, L. Lechner, Multi-scale 3D Experimental Workflow of an Aluminum 7075 Alloy, 3D Materials Science, St. Charles, IL, (2016).
  62. J. Mertens, A. Kirubanandham, S. S. Singh, A. Merkle, X. Xiao, Y. Jiao, N. Chawla, Multi-scale, multi-model analysis of deformation behavior in metallic materials by x-ray microtomography, FIB, and EBSD, TMS Annual Meeting, Nashville, TN, (2016).
  63. A. P. Merkle, L. Lechner, S. S. Singh, N. Chawla, Automated correlative tomography of an aluminum 7075 alloy spanning length scales and modalities, TMS Annual Meeting, Nashville, TN, (2016).
  64. C. S. Kaira, S. S. Singh, V. De Andrade, F. De Carlo, N. Chawla, In situ characterization of nanoscale precipitate nucleation and growth in aluminum alloys using transmission x-ray microscopy (TXM), TMS Annual Meeting, Nashville, TN, (2016). (Poster)
  65. C. Mayer, Y. Lingwei, S. S. Singh, Y-L Shen, J. Molina-Aldareguia, J. LLorca, N. Chawla, Anisotropy, size, and aspect ratio effects in micropillar compression of Al-SiC nanolaminate composites, TMS Annual Meeting, Nashville, TN, (2016).
  66. T. Stannard, J. Williams, S. S. Singh, X. Xiao, N. Chawla, In situ corrosion-fatigue of 7075 aluminum in 3.5 wt% NaCl, TMS Annual Meeting, Nashville, TN, (2016).
  67. I. Lujan-Regalado, A. Kirubanandham, C. Mayer, S. S. Singh, J. Williams, N. Chawla, Effect of crystal orientation and microstructure on the nucleation and growth of Tin (Sn) hillocks by in situ nanoindentation and electron backscattered diffraction (EBSD), TMS Annual Meeting, Nashville, TN, (2016).
  68. R. Vallabhaneni, E. Izadi, C. Mayer, S. S. Singh, C. S. Kaira, J. Rajagopalan, N. Chawla, In situ FIB/SEM tensile testing of Tin (Sn) whiskers, TMS Annual Meeting, Nashville, TN, (2016).
  69. S. Singh, J. C. E. Mertens, C. Shashank Kaira, H. Li, S. S. Singh, Y. Jiao, N. Chawla, Effect of spatial distribution of borosilicate particles in polypropylene matrix composites using X-ray microtomography, TMS Annual Meeting, Nashville, TN, (2016). 
  70. C. Mayer, Y. Lingwei, S. S Singh, J. Molina-Aldareguia, Y.L. Shen, N. Li, N. Mara, N. Chawla, Mechanical characterization of Al-SiC Nanolaminate composites using micromechanical testing methods, SES, TX (2015).
  71. S. S. Singh, J. J. Williams, T. Stannard, X. Xiao, F. De Carlo, N. Chawla, In situ materials science: microstructural evolution of materials with time, ASME, Seattle, WA, (2015).
  72. S. S. Singh, J. J. Williams, X. Xiao, P. Kenesei, F. De Carlo, J. Almer, N. Chawla, Quantification of fatigue crack closure using 3D synchrotorn x-ray tomography, ASME, Seattle, WA, (2015).
  73. T. Lai, S. S. Singh, A. Sundaram, N. Chawla, M-L Lind, The hydrogen permeability of amorphous NiNb-M (M=Sn,Ti and Zr) metallic membrane, North American Membrane Society (NAMS), Boston, MA, (2015).
  74. S. S. Singh, J. C. E. Mertens, J. J. Williams, P. Hruby, A. Kirubanandham, X. Xiao, F. De Carlo, N. Chawla, Advanced noise-reduction and segmentation methods in x-ray computed micro-tomography, 2nd International Conference on Tomography of Materials and Structures (ICTMS), Quebec, Canada, (2015).
  75. B. M. Patterson, N. Chawla, A. R. Ovejero, T. Stannard, S. S. Singh, X. Xiao, A. Ionita, D. Dalvit, D. S. Moore, K. Henderson, N. Cordes, Understanding material structure and performance with 3D x‐ray imaging, 64th Annual Conference on Applications of X-ray Analysis - Denver X-ray Conference, Westminster, CO, (2015).
  76. S. S. Singh, T. Stannard, J. J. Williams, X. Xiao, N. Chawla, In situ investigation of stress corrosion cracking of aluminum alloys by x-ray synchrotron tomography, TMS Annual Meeting, Orlando, FL, (2015).
  77. R. Yuan, S. S. Singh, N. Chawla, J. Oswald, An extended finite element algorithm for the fracture analysis of metal matrix composites with realistic SiC particle gerometeris obtaind from x-ray synchrotron tomography data, 13th U.S. National Congress on Computational Mechanics, San Diego, CA, (2015).
  78. X. Wang, S. S. Singh, T. Ma, N. Chawla, H. Jiang, Direct measurements of Li-Si composition, volume expansion and modulus variation of amorphous Si after electrochemical lithiation, IMECE, Houston, TX, (2015).
  79. A. P. Merkle, L. Lechner, L. Hunter, J. Gelb, S. S. Singh, N. Chawla, Automated correlative tomography of an aluminum 7075 alloy spanning length scales and modalities, Microscopy and Microanalysis (M&M), Portland, OR, (2015).
  80. I. Lujan-Regalado, S. S. Singh, A. Kirubanandham, J. J. Williams, N. Chawla, Characterization of tin whiskering and influence of microstructure on its formation, TMS Annual Meeting, Orlando, FL, (2015). (Poster)
  81. P. Hruby, S. S. Singh, J. J. Williams, X. Xiao, F. De Carlo, N. Chawla, Four dimensional synchrotron tomography of fatigue crack growth and damage in metal matrix composites, International Conference on Composite Materials (ICCM), Copenhagen, Denmark, (2015).
  82. R. Vallabhaneni, E. Izadi, S. S. Singh, C. Mayer, J. Rajagopalan, N. Chawla, In-situ tensile behavior of tin whiskers, TMS Annual Meeting, Orlando, FL, (2015).
  83. J. J. Williams, S. S. Singh, P. Kenesei, J. Almer, X. Xiao, F. De Carlo, N. Chawla, Investigating the plastic zone at the tip of a crack: A 3D diffraction and imaging study using synchrotron x-rays, TMS Annual Meeting, Orlando, FL, (2015).
  84. B. M. Patterson, N. Chawla, S. S. Singh, M. F. Lin, J. J. Williams, X. Xiao, M. Robinson, Z. Smith, K. Henderson, N. Cordes, Dynamic in-situ compression with synchrotron 3D tomographic imaging of cellular materials, TMS Annual Meeting, Orlando, FL, (2015).
  85. S. S. Singh, J. J. Williams, P. Hruby, J. C. E. Mertens, A. Kirubanandham, N. Chawla, X. Xiao, F. De Carlo, Image analysis of time-evolved x-ray microtomography data sets using Avizo Fire, Americas Amira-Avizo user group Meeting (AAAUGM), Boston, MA, (2014).
  86. S. S. Singh, J. J. Williams, N. Chawla, X. Xiao, F. De Carlo, Microstructural and environmental effects on FCG in 7075 Al alloy, Environmental Effects on Damage in Materials, Bergamo, Italy, (2014).
  87. S. S. Singh, C. Schwartztein, J. J. Williams, X. Xiao, F. De Carlo, N. Chawla, 3D microstructural characterization and mechanical properties of constituents particles in Al 7075 alloys using x-ray synchrotron tomography and nanoindentation, TMS Annual Meeting, San Diego, CA, (2014).
  88. S. S. Singh, R. Sarkar, H. Xie, C. Mayer, J. Rajagopalan, N. Chawla, Tensile behavior of Sn whiskers by FIB lift-out and MEMS testing in SEM,” TMS Annual Meeting, San Diego, CA, (2014).
  89. P. Hruby, S. S. Singh, J. J. Williams, H. Xie, R. Xu, X. Xiao, F. De Carlo, N. Chawla, Quantitative measurement of plastic zone size in Al 7075 using a combination of x-ray synchrotron laue microdiffraction and microtomography, TMS Annual Meeting, San Diego, CA, (2014). (Poster)
  90. S. Safarkhani, R.Yuan, S. S. Singh, J. Oswald, N. Chawla, Numerical modeling of damage in Al-SiC composites by Extended Finite Element (XFEM), TMS Annual Meeting, San Diego, CA, (2014).
  91. P. Hruby, S. S. Singh, J.J. Williams, X. Xiao, R. Xu, P. Kenesei, F. Decarlo, J. Almer, N. Chawla, Investigating the plastic zone at the tip of a crack: A 3D diffraction and imaging study using synchrotron x-rays, International Congress on 3D Materials Science 2014, Annecy, France, (2014).
  92. B. M. Patterson, Z. Smith, K. Henderson, N. Cordes, N. Chawla, J. J. Williams, S. S. Singh, E. Guo, X. Xiao, Dynamic compression imaging of syntactic foams using synchrotron x-ray computed tomography, Syntactic and Composite Foams IV, Santa Fe, NM, (2013).
  93. J. J. Williams, S. S. Singh, X. Xiao, P. Kenesei, F. Decarlo, J. Almer, N. Chawla, Investigating the plastic zone at the tip of a crack: A 3D diffraction and imaging study using synchrotron x-rays, Developments in X-Ray Tomography IX, SPIE Optics + Photonics 2014, San Diego, CA, (2014).
  94. R. Yuan, S. S. Singh, N. Chawla, J. Oswald, Efficient methods for implicit geometrical representation of complex material microstructures, 12th U.S. National Congress on Computational Mechanics, Raleigh, NC, (2013).
  95. J.J. Williams, S.S. Singh, X. Xiao, F. De Carlo, N. Chawla, Understanding fatigue and corrosion-fatigue behavior by in situ 3D x-ray synchrotron tomography, PRICM-08, Waikaloa, HI, (2013).
  96. S. S. Singh, J. J. Williams, X. Xiao, F. De Carlo, N. Chawla, Fatigue crack closure and corrosion fatigue in Al 7075 alloy using in situ x-ray synchrotron tomography, TMS Annual Meeting, San Antonio, TX, (2013).