1 |
S. Seshank |
Micro Fabrication using Electric
Discharge Deposition process
|
July 2005
|
| 2 |
Vinod Kumar |
Force and surface roughness analysis of Magnetic
Abrasive Finishing process (MAF) using non-ferromagnetic and
ferromagnetic workpiece materials
|
July 2005
|
3 |
|
Force Analysis of Magnetic Abrasive Finishing
Process of Non-ferromagnetic Materials (Co- Supervisor: Dr.
V.Raghuram)
|
Aug. 2004 |
4 |
|
Analysis of Magnetorheological Abrasive Flow
Finishing (MRAFF)Process
|
July 2004
|
5 |
|
Some new observations in Electro-Chemical Spark
Machining (ECSM) of Quartz
|
May 2003
|
6 |
|
Computer Aided Process Planning for rotational
parts using Genetic Algorithms(with Prof. K. Deb as co-supervisor)
|
July 2002
|
7 |
|
Electro-Discharge Abrasive Grinding (EDAG)
Process
|
Mar 2002
|
8 |
Santosh P. Sharma |
Interactive Computer Assisted Part Programming
for CNC lathe
|
Feb 2002 |
9 |
|
Finite Element Analysis of Magnetic Abrasive
Finishing Process(Co-supervisor: Prof. P. M. Dixit, ME)
|
June 2000
|
10 |
Santosh P. Sharma |
Deep Hole Drilling in High Speed Steel Using
Electro-Chemical Machining(Co-Supervisor: Dr. Rajiv Shekhar,
MME
|
May 2000
|
11 |
Pabitra K. Behra |
Experimental Investigations into Magnetic Abrasive
Finishing Process(Co-supervisor: Prof. Prashant Kumar, ME)
|
Dec. 1999
|
12 |
D. Sridhar Sastry |
Electro-Stream Drilling of High Speed Steel(Co-supervisor:
Dr. Rajiv Shekhar, MME).
|
July 1999
|
13 |
Amreesh Agrawal |
"On the Determination of the Viscosity
of AFM Media(Co-supervisor: Prof. K. Murlidhar, ME)
|
March 1999
|
14 |
K. M. Ramesh |
Electro Chemical Spark Machining Using Abrasive
Cutting Tools( Co-Supervisor : Prof. S.K.Choudhury)
|
Nov. 1998
|
15 |
N. Shiva Rama Krishna |
On-line Monitoring of Tool Wear and Control
of Dimensional Inaccuracy in Turning(Co-Supervisor: Prof. S.
K.Choudhury, ME).
|
Aug. 1998
|
16 |
T. Rajani Kumar |
Theoretical and Experimental Investigations
into Abrasive Flow Machining Process(Co-supervisor: Prof. P.
M.Dixit, ME).
|
July 1998
|
17 |
Arvind Shukla |
Measurement of Hydrogen content using nuclear
technique and evaluation of its effects on EDM'd components(Co-supervisor:
Dr. V. N. Kulkarni, PHY)
|
1998
|
18 |
Bikram K. Gupta |
Tool Selection and Bend Sequencing for Air
Bending of Sheet Metal Components
|
April 1998
|
19 |
Vivek Kumar |
Electric Discharge Abrasive Drilling of Cemented
Carbide and HSS
|
April 1998
|
20 |
Ch. V. V. Ramarao |
On-line Monitoring of Tool Wear in Turning
Using Neural Network(Co-Supervisor: Prof. S. K.Choudhury, ME).
|
Feb. 1997 |
21 |
|
On the Abrasive Flow Machining (AFM) Process
Performance(Co-supervisor: Prof. S. K.Choudhury, ME)
|
April 1998
|
22 |
Subodh Kulkarni |
Effect of Strain Acceleration on Plastic Deformation
Behavior of Aluminium(Co-supervisor: Dr. Om Prakash, ME).
|
Jan. 1999
|
23 |
C. Rangnath |
On the Evaluation of Rheological Properties
of Media Used in Abrasive Flow Machining (AFM)
|
Oct. 1997
|
24 |
M. S. Ankulkar |
Electric Discharge Diamond Drilling of Cemented
Carbides
|
Aug. 1997
|
25 |
|
Effect of Porosity and Glass Content on Machining
of Alumina Ceramics by Electro Chemical Spark Machining (ECSM)(Co-supervisor:
Prof. D. C. Agrawal, MSP)
|
July 1997
|
26 |
H. Rammohan |
Object Oriented Feature Based Tool Selection
System for Sheet Metal Components(Co-supervisor: Prof. Kripa
Shanker, IME).
|
April 1997
|
27 |
|
Electro-Chemical Spark Machining (ECSM) of
Alumina and Quartz
|
May 1996
|
28 |
|
Experimental Investigations into Abrasive Flow
Machining (AFM) at Low Pressure
|
Feb. 1996
|
29 |
Pulak Mohan Pandey |
On the Mechanism of Sparking and Finite Element
Simulation of ECSM Process(Co-supervisor: Prof. P. M. Dixit,
ME)
|
March 1995
|
30 |
Anand Satyadev |
Flat Pattern Development for Bent and Deep-drawn
Sheet Metal Components
|
March 1995
|
31 |
|
Experimental Investigations for the Enhancement
of ECDM Process Capabilities Using Various Tool Kinematics
|
Jan. 1995
|
32 |
Vivek V. Nesarikar |
Travelling Wire Electro-Chemical Spark Machining
of Kevlar-Epoxy Composites(Co-supervisor: Prof. S. K.Choudhury,
ME). [Paper based on this thesis won the Best Paper Award in
16th AIMTDR Conference held in Banglore in Dec. 1994]
|
July 1994
|
33 |
Chordia Yogenrda D |
"Automatic Feature Extraction and Process
Planning for 3-D Machining of Prismatic Components
|
March 1994
|
34 |
A. K. Garg |
Computer Aided Process Planning (CAPP) for
Eletro Discharge Machining (EDM)Co-supervisor: Prof. J. L. Batra,
IME
|
April 1993
|
35 |
Prem Shankar |
Analysis of Spark Discharge in EDM Process(Co-supervisor:
Dr. T. Sundararajan, ME
|
April 1994
|
36 |
Yatinder Pratap Singh |
"Design and Fabrication of Travelling-Wire
Electro-Chemical Spark Machine and Machining of Piezoelectric
Ceramics (PZT)(Co-supervisor: Prof. D. C. Agrawal, MSP
|
July 1993
|
37 |
Piyush Agarwal |
On Two-dimensional Nesting Problems(Co-supervisor:
Prof. S. G. Dhande, ME
|
April 1992
|
38 |
Lt. Pravin Dixit |
On the Feasibility of Application of Fiber-Optics
in Profile Measurement(Co-supervisor: Prof. S. K.Choudhury,
ME)
|
Feb. 1992
|
39 |
Lt. V. Ravindranath |
Experimental Investigations into Reproduction
of Profiles in Electrochemical Drilling(Co-supervisor: Prof.
J. L. Batra, IME).
|
Feb. 1992
|
40 |
Ranen Bhattacharya |
Numerical Simulation of EDM Process(Co-supervisor:
Dr. P. S. Ghoshdastidar).
|
Jan. 1992
|
41 |
Philip Koshy |
A Study on Rotating Disk Type of Tool for EDM(Co-supervisor:
Prof. G. K. Lal, ME).
|
Sep. 1989
|
42 |
Sanjay Kumar Verma |
Effect of Shear Strain Acceleration on Material
Properties of Aluminium(Co-supervisor: Prof. Prashant Kumar,
ME
|
Aug. 1989
|
43 |
G. Sankara Narayana |
Computer Aided Process Planning for Machining
of Rotational and Prismatic Parts(Co-supervisor: Prof. Kripa
Shanker, IME).
|
March 1989
|
44 |
V. Srinivas Anand |
Multi-objective Optimization of Electro-Discharge
Machining (EDM) Process(Co-supervisor: Prof. J. L. Batra, IME)
|
March 1989
|
45 |
Gurusaran |
Computer Aided Process Planning for Electrochemically
Machined Components(Co-supervisor: Prof. J. L. Batra, IME).
|
Feb. 1989 |
46 |
M. Radhakrishnan |
Design and Development of Process Planning
System and Cutter Path Simulation for Rotational Components(Co-supervisor:
Prof. Kripa Shanker, IME)
|
Jan. 1989 |
47 |
Anuj Sanjanwala |
On-line Wear Sensing and Compensation during
Turning Operations(Co-supervisor: Prof. S. K. Choudhury, ME).
|
Jan. 1989
|
48 |
P. Madhu |
Finite Element Analysis of Electro-Discharge
Machining Process(Co-supervisor: Dr. T. Sunararajan, ME)
|
Nov. 1988
|
49 |
P. Sreenivasa Rao |
Application of Travelling Wire-ECSM Process
for Machining of Composites(Co-supervisor: Prof. S. K. Choudhury,
ME).
|
Sep. 1988
|
50 |
M. Satheesha |
Machining of Fibre Composites and Development
of a Quick Stop Device(Co-supervisor: Prof. Prashant Kumar,
ME).
|
Sep. 1988 |
51 |
Girish Thakar |
"Design and Development of Database for
Process Planning and NC Part Program Generation for Rotation
Components(Co-supervisor: Prof. Kripa Shanker, IME).
|
June 1988 |
52 |
Ajay Kumar Chitta |
A Decision Support System for Process Planning(Co-supervisor:
Prof. Kripa Shanker, IME
|
July 1987
|
53 |
Vilas S. Joshi |
Viscoplastic Analysis of Metal Cutting by Finite
Element Metjod(Co-supervisor: Prof. P. M. Dixit, ME
|
July 1987
|
54 |
Sanjiv Tandon |
Machining of Composites- A New Approach(Co-supervisor:
Prof. Prashant Kumar, ME)
|
July 1987
|
55 |
|
Stray Current and Stagnation Zone Analysis
in ECD During Outward Mode of Electrolyte Flow(Co-supervisor:
Prof. G. K. Lal, ME
|
July 1987
|
56 |
|
A Computer Aided Process Planning System for
Rotational Parts in FMS Environment(Co-supervisor: Prof. Kripa
Shanker, IME).
|
March 1987
|
57 |
K. Ravi Raju |
Two-dimensional Finite Element Analysis for
Tool Design in ECM(Co-supervisor: Prof. G. K. Lal, ME).
|
March 1987
|
58 |
Gajendra Kumar Adil |
Temperature Analysis of Accelerated Cutting:
Finite Element Approach(Co-supervisor: Dr. T. Sunararajan, ME).
|
March 1987
|
59 |
Sachindra Kumar Purwar |
Analysis of Plastic Deformation Characteristics
During Metal Cutting by Finite Element Method(Co-supervisor:
Dr. T. Sunararajan, ME
|
March 1987
|
60 |
Sanjay Kumar |
Investigations into Microhardness of Chips
During Accelerated Cutting(Co-supervisor: Prof. G. K. Lal, ME).
|
Jan. 1987
|
61 |
Gopal Indurkhya |
Some Investigations into Electro Discharge
Drilling Process
|
May 1985
|
62 |
S. Murugan |
Prediction of Anode Profile in ECBD and ECBB
Operations
|
April 1985
|
63 |
P. G. Yogindra |
Two-dimensional Finite Element Analysis of
Electro Chemical Drilling Process for Anode Shape Prediction
|
March 1985
|
64 |
Girish Acrarya |
Multi-objective Optimization of Electro-Chemical
Machining (ECM)(Co-supervisor: Prof. J. L. Batra, IME)
|
Dec. 1984
|
65 |
P.S.Sreejith |
Experimental Investigations into the spike
Profile obtained during electrochemical drilling of blind holes.
|
Jan 1992 |
Dr.
Vijay Kumar Jain 