Home|Educational and Professional Career|M.Tech. Students|Ph.D. Students|Awards and Honours|Publications
Research Projects|Theses/Projects Supervision|Professional Membership and Other Activities|Teaching|Links

CONTENTS
Books
Chapter in the Book
Contribution in Encyclopedia, etc.
Journal-wise Breakup of Published Papers
Topic-wise Breakup of Published Papers
Abrasive Flow Machining (AFM)
Magnetic Abrasive Finishing (MAF)
Electro Chemical Machining (ECM)
Pulse Electro Chemical Machining (PECM)
Electro Chemical Drilling (ECD) and Electro Chemical Bit Drilling (ECBD)
Electro Stream Drilling (ESD)
Electro Discharge Machining (EDM)
Electro Discharge Drilling (EDD)
Hybrid Machining
      Electro Chemical Spark (or Discharge) Machining (ECSM or ECDM)
      Electro Discharge Diamond Grinding (EDDG)
      Electro Discharge Diamond Drilling (EDDD)
      Electro Discharge Abrasive Grinding (EDAG)
Computer Aided Process Planning (CAPP)
Metal Cutting and Accelerated Cutting
Miscellaneous
TECHNICAL PAPERS in HINDI

                                                                                                

Books

  1. "Advanced Machining Processes" Allied Publishers Mumbai, (Under Publication)
  2. Manufacturing Technology (four blocks), published by Indira Gandhi National Open University, Delhi, 2002
  3. "Slide Rule" (in Hindi) M. P. Hindi Granth Academy.
  4. "Work Shop Technology" (in Hindi) U. P. Hindi Granth Academy.

                                                                                                                                                                                                                       

Chapter in the Book
  1. V.K.Jain and Sunil Jha, "Nano-finishing", (to be published by Springer Verlag)
  2. V.K.Jain, "Electrochemical Machining", ASM Handbook, Vol. 13A, Corrosion : Fundamentals, Testing and Protection, 2003.
  3. V.K.Jain "Electrochemical Machining-Allied ECM Processes", ASM Handbook, Vol. 13A, Corrosion: Fundamentals, Testing and protection, 2003.
  4. V.K.Jain "Electrochemical Machining-Hybrid ECM Processes", ASM Handbook, Vol. 13A, Corrosion:Fundamentals, Testing and Protection, 2003
  5. Neelesh K. Jain, and Vijay K. Jain, "Computer Aided Process Planning in Agile Manufacturing Environment", Chapter 36 in Agile Manufacturing: 21st Century Manufacturing Strategy, to be published by Elsevier Science Publications, 20 pages, Editor: A. Gunasekaran [Accepted for publication]

                                                                                                                                                                                                                       

Contribution in Encyclopedia, etc.

  1. Neelesh K. Jain, and Vijay K. Jain, "Computer Aided Process Planning (CAPP) Approach for Advanced Machining Processes" Industrial Engineering Application and Practice: Users' Encyclopedia (on CD-ROM), 1999, Editor: A. Mittal.

                                                                                                                                                                                                                       

Journal-wise Breakup of Published Papers of Dr. V. K. Jain

 

Journal Name

No. of Papers published

(No. of Paper in Process)

(A) International Journals

Advanced Manufacturing Technology

Alert Advanced Manufacturing Technology

Int. J. of Computers in Industry (Neitherlands)

Trans. Of ASME, J. Engineering for Industry (U.S.A)

[Now J. of Manufacturing Science & Engineering]

1

1

2

8

Int. J. Wear (U.K.)

3

Int. J. of Production Research (U.K.)

3

Int. J. of Precision Engineering (U.K.)

11

Int. J. of Manufacturing Science & Production (U.S.A.)

1

Int. J. of Machine Tool Design & Research (U.K.)

[Now Int. J. of Machine Tools & Manufacture]

12

Int. J. of Industrial Engineering

2

Int. J. of Computer Integrated Manufacturing Systems (Netherlands) [Now Robotics and Computer Integrated Manufacturing]

2

Int. J. of Computer Application and Technology (U.K)

1

Int. J. of Applied Electrochemistry (U.K.)

1

Computer Aided Design (U.K.)  

J. of Advanced Manufacturing Systems         

1

1

J. Materials Processing Technology (U.K.)

4

Machining Science & Technology (U.S.A.)

4

Microtecnic (Switzerland)

4

Processing of Advanced Materials (U.K.)

Publications in CD-ROM

5

1

TOTAL International Journal Publications

68

(B) National Journals

J. of Institution of Engineers (India)

22

J. of Engineering Production (India)                            

7

Mechanical Engineering Bulletin (India)         

6

Machine Building Industry (India)         

4

Quarterly Journal of Engineering and Technology (India)

2

Tool and Alloy Steels (India)

Express Business Avenue

3

1

TOTAL National Journal Publications

45

TOTAL Journal Publications (A+B)

 110

Publications in Proceedings of Conferences/Symposia/Seminars

50

GRAND TOTAL

 158

Topic-wise Breakup of PUBLISHED Papers of Dr. V. K. Jain

 

Topic

 

 

Key note addresses

Advanced Machining Processes

Journal Publications

(Papers in Process)

 

4

2

Proceedings of Conferences/ Symposia/ Seminars

(In Process)

Abrasive Flow Machining (AFM)

9

5

Magnetic Abrasive Finishing (MAF)

1

1

Electro Chemical Machining (ECM)

20

7

Pulse Electro Chemical Machining (PECM)

 

 

Electro Chemical Drilling (ECD) and

Electro Chemical Bit Drilling (ECBD)

Electrochemical Spark Machining

13

9

Electro Stream Drilling (ESD)

8

 

Electro Discharge Machining (EDM)

6

1

Electro Discharge Drilling (EDD)

2

2

Hybrid Machining Processes

Electro Chemical Discharge Machining (ECSM)

7

6

Electro Discharge Diamond Grinding (EDDG)

 

  2

Electro Discharge Diamond Drilling (EDDD)

 

  2

Computer Aided Process Planning (CAPP)

9

4

Metal Cutting and Accelerated Cutting

22

13

Miscellaneous 

12

5

TECHNICAL PAPERS in HINDI

11

 

TOTAL

126

57

GRAND TOTAL

149 (10)

 

                                                                                                                                                                                                                       

ABRASIVE FLOW MACHINING (AFM)

(A) Publications in Referred Journals

  1. R. K. Jain, and V. K. Jain, "Optimum Selection of Machining Conditions in Abrasive Flow Machining Using Neural Networks", J. of Materials Processing Technology. [Communicated].
  2. R. K. Jain, and V. K. Jain, "Experimental Investigations into Abrasive Flow Machining Process", Trans. ASME, J. of Mfg. Sc. and Engg. [Communicated].
  3. R. K. Jain, and V. K. Jain, "Specific Energy and Temperature Determination in Abrasive Flow Machining Process", Trans. ASME, J. of Mfg. Sc. and Engg. [Revised and Communicated].
  4. V. K. Jain, C. Ranganath, K. Murlidhar, "Evaluation of Rheological Properties of Media for AFM Process", Machining Science & Technology [Revised and Communicated].
  5. V. K. Jain, and S.G. Adsul, "Experimental Investigations into Abrasive Flow Machining" Int. J. of Machine Tools & Manufacture, Vol. 40 (2000), pp. 1003-1021.
  6. R. K. Jain, and V. K. Jain, "Abrasive Fine Finishing Processes- A Review" Int. J. of Mfg. Sc. and Production, Vol. 2, No.1 (1999), pp. 55-68.
  7. R. K. Jain, V. K. Jain, and P. M. Dixit, "Modeling of Material Removal and Surface Roughness in Abrasive Flow Machining Process" Int. J. of Machine Tools & Manufacture, Vol. 39 (1999), pp. 1903-1923.
  8. R. K. Jain, V. K. Jain, and P. K. Kalra, "Modeling of Abrasive Flow Machining Process: a Neural Network Approach" Wear, Vol. 231 (1999), pp. 242-248.
  9. R. K. Jain, and V. K. Jain, "Simulation of Surface Generated in Abrasive Flow Machining Process" Robotics and Computer Integrated Manufacturing, Vol. 15 (1999), pp.403-412.

(B) Publications in Conferences/Symposia/Seminars Proceedings

  1. R. K. Jain, and V. K. Jain, "Abrasive Fine Finishing Processes- A Review" Proceedings International Manufacturing Engineering Conference held at Connecticut pp. 169-171,1996.
  2. V. K. Jain, "Abrasive Flow Machining" Proceedings of 1st and 6th SERC school on Advanced Manufacturing Technology, I. I. T. Madras (pp. 93-97) and I.I.T. Kanpur (pp. 51-55) respectively.

                                

MAGNETIC ABRASIVE FINISHING (MAF)

                                                 

(A) Publications in Referred Journals

 

(B) Publications in Conferences/Symposia/Seminars Proceedings

  1. V. K. Jain, and P. K. Behera, "Experimental Investigations into Magnetic Abrasive Finishing", 13th Int. Conference on Wear of Materials, Vancouver British Columbia CANADA, 22-26 April 2001 [Communicated].

                                                                                                                                                                                                                       

ELECTRO CHEMICAL MACHINING (ECM)

(A) Publications in Referred Journals

  1. F. Choobineh, and V. K. Jain (1993), "A Fuzzy Set Approach For Selecting Optimum Parameters For an ECM Process", Processing of Advanced Materials, Vol.3, No.3, pp. 225-232.
  2. V.K. Jain, and K. P. Rajurkar (1991), "An Integrated Approach for Tool Design in ECM", Precision Engineering, Vol. 13, No. 2, pp. 111-124.
  3. M. S. Reddy, V. K. Jain, and G. K. Lal (1988), "Tool Design for ECM: Correction Factor Method", Trans. ASME, Journal of Engineering for Industry, Vol. 110, pp. 111-118.
  4. V. K. Jain, and S. Murugan (1986) "Investigations into the Effects of Cathode Material on Temperature Distribution during Electro Chemical Machining", Int. J. of Production Research, Vol. 24, No. 2, pp.439-450.
  5. B. G. Acharya, V. K. Jain, and J. L. Batra (1986), "Multi Objective Optimization of ECM Process", Precision Engineering, Vol. 8, No. 2, pp. 88-96.
  6. P. C. Pandey, and V. K. Jain (1983), "Characteristics of Electrochemical Wire Cutting Process", Mechanical Engineering Bulletin, Vol. 14, No.2, pp. 48-55.
  7. V. K. Jain, and P. C. Pandey (1982), "Investigations into the use of Bit as a Cathode in ECM", Int. J. of Machine Tool Design & Research, Vol. 22, No. 4, pp. 341-352.
  8. V. K. Jain, and P. C. Pandey (1981), "Tooling Design For ECM: A Finite Element Approach", Trans. ASME Journal of Engineering for Industry, Vol. 103, No. 2, pp. 183-191.
  9. V. K. Jain, and P. C. Pandey (1981), "Some Effects of Electrolyte Flow Mode on the Anode Shape in ECM", Mechanical Engineering Bulletin, Vol. 12, No. 3, pp. 69-74.
  10. V. K. Jain, and P. C. Pandey (1981), "Tooling Design For ECM OF Complex Shaped Workpieces" J. of Institution Engineers (I), Vol. 62 Pt. ME 2 pp. 95-99.
  11. V. K. Jain, and P. C. Pandey (1981), "An Analysis and Parametric Study of ECM Process" J. of Engineering Production (I), Vol. 4, No. 3, pp. 13-31.
  12. V. K. Jain, and P. C. Pandey (1980), "Tooling Design For ECM", Precision Engineering, Vol. 2, No.4, pp. 195-206.
  13. V. K. Jain, and P. C. Pandey (1980), "Finite Elements Approach to the Two Dimensional Analysis of Electro Chemical Machining", Precision Engineering, Vol. 2, No. 1, pp. 23-28.
  14. V. K. Jain, and P. C. Pandey (1980), "Computer Aided Design of Tools in ECM", Computer Aided Design, Vol. 12, No. 6, pp. 309-315.
  15. V. K. Jain, and P. C. Pandey (1980), "On The Complex Nature of ECM Process" Presented in 3rd ISME Conference and Published in Mechanical Engineering Bulletin, Vol. 11, No. 1, pp. 38.
  16. V. K. Jain, and P. C. Pandey (1980), "Application of The Finite Element Technique for the Analysis of Electrochemical Wire Cutting Process" J. of Institution of Engineers (I), Vol. 60, Pt. ME 6 pp. 203-210.
  17. V. K. Jain, and P. C. Pandey (1979), "Conference Report of 8th AIMTDR", Precision Engineering, Vol. 1 No. 4, p. 346.
  18. V. K. Jain, and P. C. Pandey (1979), "Application of Finite Element Technique to ECM" J. of Engineering Production (I), Vol. 3 No. 3 and 4 pp. 135-148.
  19. V. K. Jain, and P. C. Pandey (1979), "Design and Analysis of ECM Tooling", Precision Engineering, Vol. 1, No. 4, pp. 199-206.
  20. V. K. Jain, and P. C. Pandey (1977), "On Some Aspects of Tool Design in ECM", Mechanical Engineering Bulletin, Vol. 8, No. 3, pp. 60-72.

(B) Publications in Conferences/Symposia/Seminars Proceedings

  1. F. Choobineh and V. K. Jain, (1990) "Selection of ECM Parameters: A Fuzzy Set Approach" Proceedings IEEE Conference held at Los Angles (USA), pp.403-435.
  2. K. Ravi Raju, V. K. Jain, and G .K. Lal (1988) "Cathode Design For ECM: Two Dimensional Approach" Proc. Int. Symposium on Research and Technological Developments in Nontraditional Machining sponsored by Production Engineering Division of ASME (edited by K. P. Rajurkar) held at Chicago, pp. 89-103.
  3. V. K. Jain, B. G. Acharya and J. L. Batra (1988), "Determination of Optimum Machining Conditions for Electro Chemical Machining (ECM)", Proceedings 9th ICPR held at Cincinnati Ohio (USA) August 1988 (edited by A. Mittal), pp.45-51.
  4. V. K. Jain, and P.C. Pandey (1980), "On the Heat Transfer Model for ECM using Finite Element Technique", Proc. 5th Heat and Mass Transfer Conference Hyderabad Paper No.07, pp.355-362.
  5. V. K. Jain, and P.C.Pandey (1979) "An Analysis of Electrochemical Wire Cutting Process using Finite Element Technique", Proc. 20th International Machine Tool Design and Research Conference Birmingham (U.K.) pp.631-636.
  6. V. K. Jain, and P.C. Pandey (1978) "Design of ECM Tooling using Finite Element Technique", Proc.8th AIMTDR Conference, IIT Bombay, pp.566-570.

                                                                                                                                                                                                                       

PULSE ELECTRO CHEMICAL MACHINING (PECM)

(A) Publications in Referred Journals

 

(B) Publications in Conferences/Symposia/Seminars Proceedings

  1. D. S. Bilgi, and V. K. Jain, "Deep Hole Drilling Techniques for Super Alloys", Proceedings of the 19th All India Manufacturing Technology Design and Research Conference, I.I.T. Madras, Dec.2000. (Accepted)

                                                                                                                                                                                                                       

ELECTRO CHEMICAL DRILLING (ECD) or ELECTRO CHEMICAL BIT DRILLING (ECBD)

(A) Publications in Referred Journals

  1. P. S. Sreejith, Vijay K. Jain, and G. K. Lal (1994), "Experimental Investigations into Spike Profile Obtained during ECD of Blind Holes in HSS", J. Processing of Advanced Materials, Vol. 4, pp. 67-79.
  2. V. K. Jain, K. Ravi Raju, G.K.Lal, and K. P. Rajurkar (1991), "Investigations Into Tool (Cathode) Design For Electro Chemical Drilling", Processing of Advanced Materials, Vol.1, No. 1, pp. 105-121.
  3. M. S. Hewidy, and V. K. Jain (1987), "On the Production of Elliptical Holes by ECM", Int. J. Production Research, Vol. 25, No.3, pp. 433- 445.
  4. V. K. Jain, P. G. Yogindra, and S. Murugan (1987), "Prediction Of Anode Profile in ECBD and ECD Operations", Int. J. Machine Tools & Manufacture, Vol. 27, No.1, pp. 113-134.
  5. Vijay Kumar Jain, and S. Murugan (1987), Workshape Prediction in Electrochemical Drilling and Electro Chemical Boring Operations", Microtecnic, Vol. 3, pp. 42-47.
  6. V. K. Jain, and V. N. Nanda (1986), "Analysis of Taper Produced in Side Zone during ECD", Precision Engineering, Vol. 8, No.1, pp. 27-33.
  7. V. N. Nanda, and V. K. Jain (1986), "Some Investigations into Overcut during Electro Chemical Drilling Using Bare Tools", J. Institution of Engineers (I), Vol. 66, Part PE 3, pp. 111-116.
  8. V. K. Jain, Vinod Kumar Jain, and P. C. Pandey (1985), "On The Reproduction Accuracy Of Anode Corner Profile During Electro Chemical Drilling (ECD) Of Blind Holes", Trans. Of ASME, Journal of Engineering for Industry, Vol. 106, No. 1, pp. 55-61.
  9. V. K. Jain, and P. C. Pandey (1982), "Some Investigations into Anode Profile in the Transition Zone in an Electro Chemical Hole Sinking Operation", Int. J. of Applied Electrochemistry, Vol. 12, No. 5, pp. 497-500.
  10. V. K. Jain, and P. C. Pandey (1982), "An Analysis Of Overcut in Transition Zone in EC Hole Sinking Operation", J. Of Engineering Production (I), Vol. 5, pp. 1-10.
  11. V. K. Jain, and P. C. Pandey (1982), "A Computer Program For CAD Of ECD Tools", J. of Engineering Production (I), Vol. 5, No. 1, pp. 15-34.
  12. V. K. Jain, and P. C. Pandey (1981), "An Analysis of Anode Profile in ECD", J. of Institution of Engineers (I), Vol. 62, Pt ME 2, pp. 86-94.

(B) Publications in Conferences/Symposia/Seminars Proceedings

  1. Lt. V. Ravindernath, V, K, Jain, and J. L. Batra (1997) "On the Reproduction of Corner Profiles in Electro Chemical Drilling", Proceedings 14th International Conference on Production research, Osaka Japan.
  2. M. S. Reddy V. K. Jain, and G. K. Lal (1987) "Computer Aided Design of Cathode for Electro Chemical Driliing", Proceedings 9th Int. Conference on Production Research (ICPR) held at Cincinnati (USA), pp.1236-1242.
  3. P. G. Yogindra and V. K. Jain, (1985) "Computer Aided Design of Tool for ECD Process: Finite Element Approach using Triangular Elements" Proc. Int. Conf. CAD/CAM/CAE held at I.I.Sc. Bangalore, pp.181-187.
  4. V. K. Jain, Vinod Kumar Jain, and P. C. Pandey (1984), "Experimental Investigations into Reproduction Accuracy in Transition Zone during EC Hole Sinking Operation", Proc. 11th AIMTDR Conference, I. I. T. Madras, pp. 320-326.
  5. V. K. Jain, and P. C. Pandey (1982), "Some Investigations into Electro Chemical Boring Using Bit Type of Tools" Presented and Published in 10th AIMTDR Conference held at CMERI Durgapur, pp.380-386.
  6. V. K. Jain, and P. C. Pandey (1980) "Anode Profile in Electro Chemical Drilling", 9th AIMTDR Conference held at IIT Kanpur (India), pp.338-350.
  7. V. K. Jain, and P. C. Pandey (1980) "Experimental Investigations into Electro Chemical Drilling in Steel" 21st International Machine Tool Design and Research Conference Swansea (England) pp.373-379.
  8. V. K. Jain, and P. C. Pandey (1979) "Anode Prediction in Deep Hole Drilling during ECM", Proc. 4th Biennial Seminar on Gas Turbine GTRE Bangalore, pp.419-424.

                                                                                                                                                                                                                      

ELECTRO STREAM DRILLING (ESD)

(A) Publications in Referred Journals

 

(B) Publications in Conferences/Symposia/Seminars Proceedings

 

                                                                                                                                                                                                                       

ELECTRIC DISCHARGE MACHINING (EDM)

(A) Publications in Referred Journals

  1. P. Shankar, V. K. jain and T. Sundararajan (1997), "Analysis of Spark Profiles during EDM Process", Machining science & Technology, vol. 1(2), pp. 195-217
  2. R. Bhattacharya, V. K. Jain and P. S. Ghoshdastidar (1996), "Numerical Simulation of Thermal Erosion in EDM Process", J. of Institution of Engineers (I), Production Engg. Division, Vol. 77, pp. 13-19.
  3. Philip Koshy V. K. Jain and G. K. Lal (1993), "Experimental Investigations into Electrical Discharge Machining with a Rotating Disk Electrode", Precision Engineering, Vol. 15, No. 1, pp. 6-15.
  4. P. Madhu, V. K. Jain, T. Sundararajan and K. P. Rajurkar (1991), "Finite Element Analysis of EDM Process", Processing of Advanced Materials, Vol. 1, No. 3/4, pp. 161-174.

(B) Publications in Conferences/Symposia/Seminars Proceedings

  1. P. Madhu, V. K. Jain,, T.Sunderarajan and K. P. Rajurkar (1991) "Analysis of EDM process: A finite element approach" Proceedings of the ASME International Conference on Computers in Engineering held at Santa Clara (USA), vol. 2, pp. 121-127.

                                                                                                                                                                                                                       

ELECTRIC DISCHARGE DRILLING (EDD)

(A) Publications in Referred Journals

  1. Srinivas, J. L. Batra, V. K. Jain and K. P. Rajurkar (1990), "Multi objective Optimization of Electro Discharge Drilling", Microtecnic, Vol. 21/90, pp. 33-37.
  2. V. K. Jain (1989), "Analysis of Electro-Discharge Drilling of a Precision Blind Hole in HSS using a Bit Type of Tools", Microtecnic, No. 2, pp. 34-40.

(B) Publications in Conferences/Symposia/Seminars Proceedings

  1. Gopal Indurkhya, V. K. Jain and K. P. Rajurkar (1990) "Experimental Investigations into Electro Discharge Drilling" proceedings of Advanced Manufacturing Technology III Conference held at Chicago (USA).
  2. Gopal Indurkhya and V. K. Jain, (1989) "On The Effects of t D and d on Technological Characteristics during Electro-Discharge Drilling of Blind Holes" presented in Xth ICPR held at Nottingham (UK) during Aug.1989.

                                                                                                                                                                                                                       

ELECTRO CHEMICAL SPARK OR DISCHARGE MACHINING [ECSM or ECDM]

(A) Publications in Referred Journals

  1. V. K. Jain, and S. K. Chak, "Electro Chemical Spark Trepanning of Alumina and Quartz", Machining Science & Technology [Accepted for Publication]
  2. V. K. Jain, P. M. Dixit, and P.M. Pandey (1999), "On the Analysis of Electro Chemical Spark Machining Process", Int. J. Machine Tools & Manufacture, Vol. 39, No. 1 pp. 165-186.
  3. Naveen Gautam and V. K. Jain (1998), "Experimental Investigations into ECSD Process Using Various Tool Kinematics", Int. J. Machine Tools & Manufacture, Vol. 38, No. 1, pp. 115-273.
  4. Y. P. Singh, V. K. Jain, Prashant Kumar, and D. C. Agrawal (1996), "Machining piezoelectric (PZT), Ceramics Using an Electro Chemical Spark Machining (ECSM) Process", J. of Materials Processing Technology, Vol. 58, pp. 24-31.
  5. V. K. Jain, P. S. Rao, S. K. Choudhury, and K. P. Rajurkar (1991), "Experimental investigations into Travelling Wire Electro Chemical Spark Machining (TW-ECSM) of Composites", Trans ASME, Journal of Engineering for Industry, Vol. 113, No. 1, pp. 75-84.
  6. V. K. Jain, S. Tandon, and P. Kumar (1990), "Experimental Investigations into Electro Chemical Spark Machining of Composites", Trans. ASME, Journal of Engineering for Industry, Vol. 112, No. 2, pp. 194-197.
  7. S. Tandon, V. K. Jain, Prashant Kumar, and K. P. Rajurkar (1990), "Investigations into Machining of Composites", Precision Engineering, Vol. 12, No. 4, pp. 227-238.

(B) Publications in Conferences/Symposia/Seminars Proceedings

  1. V. K. Jain (1997) "Advanced Machining Processes for High Strength Metals" Aerospace Manufacturing Technology Proceedings of 13th National Convention of Aerospace Engineers Nasik Ojhar Township.
  2. V. K. Jain (1997) "On the Electro Chemical Spark Machining of Electrically Non-Conducting Materials" India Japan workshop on Advance Manufacturing Systems, IIT Bombay, pp. 71-87.
  3. Naveen Gautam, and V. K. Jain, (1997) "Experimental Investigations into ECSM Process Using Flow of Electrolyte" Proc. International Conference on Advances in Mechanical and Industrial Engineering held at Deptt. of Mech. & Ind. Engg. University of Roorkee, pp.717-724.
  4. V. V. Nesarikar, V. K. Jain, and S. K. Choudhury (1995) "Experimental Investigations Into Electrochemical Spark Machining of Kevlar Epoxy Composites" Proc. of Xth American Society of Precision Engineering Annual Meeting, Auxtin Texas, pp. 292-295.
  5. V. V. Nesarikar, V. K. Jain, and S. K. Choudhury (1994) "Travelling Wire Electrochemical Spark Machining (TW-ECSM) of Thick Sheets of Kevlar Epoxy Composites" Proc. 16th All India Manufacturing Technology Design and Research Conference held at Bangalore, pp.672-677.
  6. V. K. Jain, (1993) "ECSM A New Way To Machine Polymer Composites" Proceedings of Int. Conference on CAD CAM Robotics and Autonomous Factories held at I.I.T. Delhi, pp.359-368.

                                                                                                                                                                                                                       

ELECTRO DISCHARGE DIAMOND GRINDING [EDDG]

(A) Publications in Referred Journals

  1. S. K. Choudhury, V. K. Jain, and Manoj Gupta, "Electrical Discharge Diamond Grinding of High Speed Steel", Int. J. of Machining Science & Technology, V.3(1), 1999, pp.
  2. P. Koshy, V. K. Jain and G. K. Lal (1997), "Grinding on Cemented Carbide with Electrical Spark Assistance", Journal of Materials Processing Technology, Vol. 72, pp. 61-68.
  3. P. Koshy V. K. Jain and G. K. Lal (1997), "Stochastic Simulation Approach to Modeling Diamond Wheel Topography", Int. J. Machine Tools & Manufacture, Vol. 37, No. 6, pp. 751-761.
  4. P. Koshy V. K. Jain and G. K. Lal (1996), "Mechanism of Material Removal in Electrical Discharge Diamond Grinding", Int. J. Machine Tools & Manufacture, Vol. 36, No. 10, pp. 1173-1185.
  5. Philip Koshy, V. K. Jain, and G. K. Lal (1993), "A Model For The Topography of Diamond Grinding Wheel", Wear, Vol. 169, No. 2, pp. 237-242.

(B) Publications in Conferences/Symposia/Seminars Proceedings

 

                                                                                                                                                                                                                       

ELECTRO DISCHARGE DRILLING [EDDD]

(A) Publications in Referred Journals

(B) Publications in Conferences/Symposia/Seminars Proceedings

 

ELECTRO DISCHARGE ABRASIVE GRINDING [EDAG]

(A) Publications in Referred Journals

 

(B) Publications in Conferences/Symposia/Seminars Proceedings

  1. V. Yadava and V. K. Jain, "Modeling of Hybrid Machining: Abrasive Electro Discharge Grinding (EDAG) Process", Proceedings of the 19th All India Manufacturing Technology Design and Research Conference, I.I.T. Madras, Dec.2000. (Accepted)
  2. V. Yadava and V. K. Jain, "Abrasive Electro Discharge Grinding", Proceedings of the 18th All India Manufacturing Technology Design and Research Conference, I.I.T. Kharagpur, pp. 357-362, Dec.1998.

COMPUTER AIDED PROCESS PLANNING (CAPP)

(A) Publications in Referred Journals

  1. R. Jagirdar, V. K. Jain, J. L. Batra and S. G. Dhande (1996), "Characterization of Shearing Features for Sheet Metal Components in 2D Layout", Int. J. Production Research, Vol. 34, No. 1, pp. 157-190.
  2. R. Jagirdar V. K. Jain J. L. Batra and S. G. Dhande (1995), "Feature Recognition Methodology for Shearing Operations for Sheet Metal Components", Computer Integrated Manufacturing Systems, Vol. 8, No. 1, pp. 51-62.
  3. V. K. Jain, J. L. Batra and A. K. Garg (1995), "Computer Aided Process Planning for Electric Discharge Machining (EDM)", J. of Materials Processing Technology, Vol. 48, pp. 561-569.
  4. Girish Thakkar, Kripa Shankar and V. K. Jain (1993), "An Integrated Process Planning and NC Part Programming System for Rotational Components", Int. J. of Computers in Industry, Vol. 21, pp. 341-357.
  5. V. N. Vittal, V. K. Jain and Kripa Shankar (1990), "A Computer Aided Process Planning System for Rotational Parts for FMS Environment", Int. J. of Computer Applications in Technology, Vol. 3, No. 2, pp. 61-69.
  6. K. Chitta, Kripa Shankar and V. K. Jain (1990), "A Decision Support System for Process Planning", Int. J. of Computers in Industry, Vol. 14, pp. 307-318.

(B) Publications in Conferences/Symposia/Seminars Proceedings

  1. H. Ram Mohan, V. K. Jain, and Kripa Shanker (1997) "Feature Based Process Planning System for Sheet Metal Components: An Object Oriented Perspective" 1st Int. Conference on Operations and Quantitative Management held at Jaipur, pp. 291-298.
  2. Gurusaran, V. K. Jain, and J.L.Batra (1989) "Computer Aided Process Planning for ECM" presented in Xth ICPR held at Nottingham (UK) and published in Production Research Approaching the 21st Century, published by Taylor & Francis, 1991, pp.780-789.
  3. J. L. Batra, Gursaran and V. K. Jain, (1989) "A Computer Aided Process Planning for Electro Chemically Machined Components" Proc. 34th Int. Conf. on CAD CAM Robotics and Factories of the future (Vol. III) at IIT Delhi, Dec. 1989, pp.666-679.
  4. V. N. Vittal, V. K. Jain and Kripa Shanker (1989) "A Computer Aided Process Planning System for Rotational Parts for FMS Environment" Proc. of 9th ICPR Conference held at Nottingham (UK).

METAL CUTTING & ACCELERATED CUTTING

(A) Publications in Referred Journals

  1. S. K. Choudhury, V.K. Jain, and N. S. Rama Krishna (), "On-line Monitoring of Tool Wear and Control of Dimensional Inaccuracy in Turning", Trans. Of ASME, J. of Mfg. Sc. and Engg. [Accepted for Publication]
  2. S. K. Choudhury, V.K. Jain, and Ch.V. V. Rama Rao (1998), "On-line Monitoring of Tool wear in Turning Using Neural Network", Int. J. of Machine Tools & Manufacture, V. 39(3), 1998, pp.489-504.
  3. S. K. Choudhury, V. K. Jain, and P. Dixit (1995), "Applications of Fibre Optics in Profile and Burr Measurement", J .of Institution of Engineers (I), Prod. Engg. Div, Vol. 76, pp. 41-45.
  4. V. S. Joshi, P. M. Dixit, and V. K. Jain (1994), "Visco-plastic Analysis of Metal Cutting by Finite Element Method" Int. J. of Machine Tools & Manufacture, Vol. 34, No. 4, pp. 553-571.
  5. M. Satheesha, V. K. Jain, and P. Kumar (1991), "Investigations Into Machining of GFRP Composites", Processing of Advanced Materials, Vol. 1, No. 1, pp. 1-10.
  6. M. Satheesha, V. K. Jain, and Prashant Kumar(1990), "Design and Development of a Quick Stop Device", Precision Engineering, Vol. 12, No. 4, pp. 205-212.
  7. Anuj Sanjanwala, S. K. Choudhury, and V. K. Jain (1990), "On Line Tool Wear Sensing and compensation during Turning Operation", Precision Engineering, Vol. 12 No.2, pp. 81-84.
  8. V. K. Jain, Sanjay Kumar, and G. K. Lal (1988), "Effects of Machining Parameters on Micro-hardness of Chips", Trans ASME, Journal of Engineering for Industry, Vol. 111, pp. 220-228.
  9. G. K. Adil, V. K. Jain, and T. sundararajan (1988), "A Finite Element Analysis of Temperature in Accelerated Cutting", Int. J. of Machine Tools & Manufacture, Vol. 28, No. 4, pp. 577-590.
  10. V. K. Jain, and B. K. Gupta (1987), "Effects of Accelerated Tests on Shear Flow Stress in Machining", Trans. ASME, Journal of Engineering For Industry, Vol. 109, No. 2, pp. 206-212.
  11. V. K. Jain, and D. K. Bandyopadhyay (1986), "Shear Angle during Accelerated Cutting: Response Surface Approach", Int. J. Machine Tools Design and Research, Vol. 26, No. 1, pp. 35-50.
  12. V. K. Jain, and S. B. Thakare (1985), "Analysis of Tool Flank Wear during Taper Turning" Microtecnic, No. 4, pp. 40-45.
  13. V. K. Jain (1983), "Wear Of H.S.S. Tools When Executing Accelerated Cuts", J. of Engineering Production (I), Vol. 6, No. 3, pp. 134-147.
  14. V. K. Jain, and S. B. Thakare (1983), "Tool Wear During Taper Turning", Int. J. On Wear, Vol. 85, No. 3, pp. 293-307.
  15. V. K. Jain, and P. C. Pandey (1983), "Strain Acceleration and its Applications to Accelerated Machinability Tests", J. of Institution of Engineers (I), Vol. 64, Pt ME 2, pp. 72-79.
  16. D. K. Bandyopadhyay, P. K. Mishra, and V. K. Jain (1981), "Tool Wear in Metal Cutting", Tool and Alloy Steel, pp. 371-376.
  17. V. K. Jain, and P. C. Pandey (1979), "Strain Acceleration: A New Concept in Metal Cutting and its Effects on Accelerated Machinability Tests", J. of Engineering Production (India), Vol. 3, No. 1, pp. 15-26.
  18. V. K. Jain, and S. B. L. Garg (1978), "Application of Dimensional Analysis to the Determination of Primary Shear Deformation Zone Size", J. of Institution of Engineers (I), Vol. 59, Pt. M.E 2, pp. 70-73.
  19. V. K. Jain, and P. C. Pandey (1975), "Validity of Facing Test as Applied to Machinability Evaluation", J. of Institution of Engineers (I), Vol. 56, Pt ME 3, pp. 120-122.
  20. V. K. Jain, and P. C. Pandey (1974), "Turning with Rotary Tools", Machine Building Industry, p. 15.
  21. V. K. Jain, and P. C. Pandey (1973), "Pressure-Chips-Breaking for Fine Turning", Machine Building Industry, Vol. 53, Pt HI, pp. 126-128.

 

(B) Publications in Conferences/Symposia/Seminars Proceedings

  1. S. K. Purwar, V. K. Jain, and T. Sundarajan (1997) "Analysis of Plastic Deformation Characteristics During Metal Cutting by Finite Element Method", Proc. 17th AIMTDR Conference held at REC Warangal, Jan. 1997, pp. 21-26.
  2. S. K. Verma, P. Kumar and V. K. Jain, (1993) "Flow Stress Dependence of Aluminium on Strain Acceleration in Shear" Proceedings of symposium on Plasticity and Impact Mechanics held at I.I.T. Delhi, pp.498-506.
  3. Vilash S. Joshi, P. M. Dixit and V. K. Jain, (1989) "Visco-plastic Analysis of Metal Cutting by FEM" presented in Xth ICPR held at Nottingham (UK).
  4. S. B. Thakare, V. K. Jain, and P. K. Mishra, (1982) "Analysis of Tool Wear During Taper Turning Using Response Surface Methodology", Proc. of 5th ISME Conference at M.N.R.E.C. Allahabad, Dec. 1982, pp. 25-30.
  5. V. K. Jain, and P.C. Pandey (1981), "Tool Wear Under Accelerated Cutting Conditions", Proc. 3rd Int. Conference on Wear of Materials, San Fransisco 1981, ASME New York, pp. 447-455.
  6. A. S. Jhita, V. K. Jain, and P.C. Pandey (1981), "Experimental Investigations into Tool Wear During Facing Test", Proc. 4th ISME Conference at University of Roorkee, 1981, pp. 251-256.
  7. A. S. Jhita, V. K. Jain, and P.C. Pandey (1981), "On the Tool Wear During Facing Turning", Proc. 22nd Int. Machine Tool Design and Research Conference, Manchester, Sep. 1981, pp. 247-253.
  8. A. S. Jhita, and V. K. Jain (1981), "Investigations into Tool Wear Behaviour During Accelerated Machining Test", Proc. National Conference on Tribology organized by IOCL Faridabad, pp. III3.1-III3.4.
  9. V. K. Jain, and P. C. Pandey (1980), "An Analytical Approach to the Determination of Mean Width of Primary Shear Deformation Zone (PSDZ) in Orthogonal Machining", Proc. of 4th Int. Conference on Production Engineering, Tokyo, 1980, pp. 434-438.
  10. V. K. Jain, P.C. Pandey, A. P. Singh, P. N. Awasthi (1978), "Effects of Stain Acceleration in Accelerated Machinability Tests", Proc. of 8th AIMTDR Conference I. I. T. Bombay, pp. 369-373.
  11. V. K. Jain, S. B. L. Grag (1977), "On the Dependence of Size of Primary Shear Deformation Zone on Different Parameters During Orthogonal Machining", Proc. of Int. Conference on Production Engineering, New Delhi, pp. V-87-V97.
  12. V. K. Jain, S. B. L. Grag (1977), "Theoretical and Experimental Investigations in Accelerated Machinability Tests", Proc. of Int. Conference on Production Engineering, New Delhi, pp. V-283-V292.

 

MISCLLANEOUS (State-of-Art Reviews, Molding, Welding, etc.)

(A) Publications in Referred Journals

  1. Neelesh K. Jain, and Vijay K. Jain, "Modeling of Material Removal in Mechanical Type of Advanced Machining Processes: a State-of-Art Review", Int. J. of Machine Tools and Manufacture, 50 pages [Communicated]
  2. S. K. Mishra, and V. K. Jain (1986), "Thermal Properties of CO2-Silicate Molds/Cores: Response Surface Approach", J. of Institution of Engineers (I), Vol. 67, pp. 17-23.
  3. V. K. Jain, and G. P. Srivastav (1985), "Mechanical Properties of CO2- Silicate Molds/Cores", J. of Institution of Engineers (I), Vol. 66, part PE 2, pp. 57-68.
  4. Pritam Singh, and V. K. Jain (1984), "Investigations Into Thermal Properties of Indian Foundry Sands", Tool and Alloy Steel, pp. 15-20.
  5. V. K. Jain, N. D. Das, P. K. Mishra, and P. N. Awasthi (1980), "Effect of PH Value of Water on the Hardness of Partially Under-Water Weldments", Tool and Alloy Steel, pp. 337-339.
  6. Pritam Singh, and V. K. Jain (1980), "Thermal Properties of Shankargarh Foundry Sands", J. of Institution of Engineers (I), Vol. 61, part ME 3, pp. 110-115.
  7. V. K. Jain, N. D. Das and J. L. Gaindhar (1979), "Metallurgical Aspects of Partially Under Water Weldments", Machine Building Industry, pp. 23-27.
  8. V. K. Jain, O. P. Singhal (1978), "Effects of Flow of CO2 Gas Through Porous Moulding Materials", J. of Institution of Engineers (I), Vol. 59, Pt ME1, pp. 29-33
  9. V. K. Jain, and O. P. Singhal (1976), "Carbon Dioxide Silicate Process for Making of Molds and Cores", Mechanical Engineering Bulletin, Vol. 7, No. 4, pp. 126-131.
  10. V. K. Jain, and Gita Ram (1977), "Use of Liquid Jet as a Metal Cutting Tool", Mechanical Engineering Bulletin, Vol. 8, No. 4, pp. 108-112.
  11. V. K. Jain, and Gita Ram (1976), "An Introduction to Electron Beam Welding", Machine Building Industry, pp. 43-48.

(B) Publications in Conferences/Symposia/Seminars Proceedings

  1. V. K. Jain (1998) "Biochemical Machining of Biodegradable Plastics", Proceedings of 5th SERC school held I. I. T. Delhi, pp. 221-224.
  2. Sanjay Kumar and V. K. Jain, (1996) "On the Transfer of Advanced Manufacturing Technology to SMIs" Proc. Int. Conference on Agile Manufacturing held at Bangalore, pp.217-225.
  3. V. K. Jain, (1996) "Developments in ECM, EDM, and AFM" Proc. 1st SERC school on Advanced Manufacturing Technology held at I.I.T. Madras, pp.78-97.
  4. V. K. Jain (1996) "On the Modeling of Manufacturing Processes" Proc. 1st SERC school on Advanced Manufacturing Technology held at I.I.T. Madras, pp.110-113.
  5. V. K. Jain, N. D. Das, P. N. Awasthi, and P. K. Mishra, (1978), "Experimental Investigations into the Effects of Some Variables on Hardness Distribution in Underwater Weldments", Aero-Asian Conference on Welding & Metals Technology, Delhi, Paper 25, pp. 1-5.

 

TECHNICAL PAPERS in HINDI
  1. V. K. Jain, and A. K. Jain (1978), "Avinashi Parikshan Vidhiyan: Ek Parichay [An Introduction to Non Destructive Testing Methods]", J. of Institution of Engineers (I), Vol. 59, pp. 21-28.
  2. V. K. Jain, and J. P. Dwivedi (1978), "Gramm Udhyogikikaran [Village Industrialization]", J. of Institution of Engineers (I), Vol. 59, pp. 129-130.
  3. V. K. Jain (1977), "Akriya Gas Parirakshit Arc-Weldon [Inert Gas Shielded Arc Welding]", J. of Institution of Engineers (I), Vol. 58, Pt HI 1, pp. 37-42.
  4. P. K. Biswas, and V. K. Jain (1976), "Baluon ke Kuchh Ushmiya Gunn [Some Thermal Properties of Sands]", J. of Institution of Engineers (I), Vol. 57, Pt HI, pp. 61-66.
  5. V. K. Jain, and R. G. Mittal (1975), "main Adhunik Vikas [Recent Developments in Hydrostatic Extrusion]", J. of Institution of Engineers (I), Vol. 55, pp. 63-66.
  6. V. K. Jain (1975), "Machinan Yogyata Parikshan Ki Vidhiyan [Methods of Testing Machinability]", J. of Institution of Engineers. (I), Vol. 56, Pt HI, pp. 53-56.
  7. V. K. Jain (1974), "Kartan Aujaar Saamgree [Cutting Tool Materials]", Quarterly Journal of Engineering and Technology, pp. 71-73
  8. D. K. Bajaj, and V. K. Jain (1974), "Urga Sankat [Energy Crises]", J. of Institution of Engineers. (I), Vol. 55, pp. 3-4.
  9. V. K. Jain (1974), "Hindi main Takneekee Lekhan [Technical Writing in Hindi]", Quarterly Journal of Engineering and Technology, pp. 80-81.
  10. V. K. Jain, and P. C. Pandey (1973), " Cheelan Bhanjak ke Prakar [Type of Chip Breakers]", J. of Institution of Engineers (I), Vol. 54, pp. 13-16.
  11. V. K. Jain, and P. C. Pandey (1973), "Sukshm Kharadan Ke Liye Daab-Chheelan-Bhanjak [Pressure-Chips-Breaking for Fine Turning]", J. of Institution of Engineers. (I), Vol. 53, Pt HI, pp. 126-128.