Former M.Tech Students
76 Records| S.No. | Image | Scholar Name | Research / Thesis Title | Year |
|---|---|---|---|---|
| 1 |
|
Mishra, Deepak | Automation of the Excimer Laser Micromachining and Two Photon Polymerization process for large area fabrication | 2019 |
| 2 |
|
Singh, Jitendra Kumar | Characterization of FRP-Joints | 2007 |
| 3 |
|
Chhetri, Tara | Design and Development of a Fused Deposition Modeling Process through Application of Value Engineering Techniques | 2024 |
| 4 |
|
Gundavarapu, Parameshwari | Design and Development of MRF Process for Nanofinishing of Ti6Al4V Discs | 2017 |
| 5 |
|
Zeeshan, Mohd | Designing of Additively Built Acoustic Metamaterial to improve Acoustic Behaviour and Performance | 2023 |
| 6 |
|
Deep, K S | Determination of Limiting Blank Holding Force and Cavity Pressure in Hydromechanical Deep Drawing | 2005 |
| 7 |
|
Naveen, Gopal Voruganti | Development and Characterisation of Jute Sandwiched Structure | 2005 |
| 8 |
|
Sheikh, Suhail | Effect of milling parameters on the cavitation behaviour of medium carbon steel | 2024 |
| 9 |
|
Joshi, Brahmesh | End-of-Life Analysis of Automobile Lead-Acid Batteries: A System Dynamics Approach | 2019 |
| 10 |
|
Kumar, Raj | Excimer Laser Micromachining of Silicon using Mask Projection Techniques | 2022 |
| 11 |
|
Srinivas, Putta | Experimental and Numerical Analysis of GRRP Sandwich Composite Wall Panels | 2007 |
| 12 |
|
Kulkarni, Sumedh Suresh | Experimental Investigation of Formability Enhancement Using Warm Deep Drawing | 2006 |
| 13 |
|
Mondal, Subrata | Experimental Investigation on Modified AFM Process | 2007 |
| 14 |
|
Singh, Chandra Bhan | An Experimental Investigation on Surface Grinding of Ti6Al4V using MQL technique | 2013 |
| 15 |
|
Kumar, Vishal | Experimental Investigations on Electric Discharge Trepanning of Difficult-to-Cut Aerospace Materials | 2016 |
| 16 |
|
Singh, Devesh | Experimental Study of a GFRP Sandwich Panel for Earthquake-Resistant Buildings | 2006 |
| 17 |
|
Mankad, Tarun | Exploring vibrational aptitude and atto-gram mass sensing ability of composite nano-pillars | 2009 |
| 18 |
|
Shukla, Vaibhav | Fabrication and Characterization of Complex Micro Channels by Micro Electric Discharge Milling (µ-ED Milling) | 2012 |
| 19 |
|
Shah, Randhir Kumar | Fabrication and Evaluation of Mechanical Properties, Tribology and Piercing Behaviour of Groundnut Shell-PVA/PP Composites | 2014 |
| 20 |
|
Akhtar, Syed Nadeem | Fabrication and Modeling of Ionic Polymer Metal Composites for Use as Actuators | 2007 |
| 21 |
|
Hemanth Kumar, P | Fabrication and Performance Evaluation of Thin Sandwich Composites | 2008 |
| 22 |
|
Singh, Jitendra | Fabrication of Complex Circuit Using Electrochemical Micro Machining on Printed Circuit Board (PCB) | 2014 |
| 23 |
|
Singh, Gaganpreet | Fabrication of flexible absorber using Screen Printing Technology | 2018 |
| 24 |
|
Kumar, Adarsh | Fault detection and classification in drilling using vibration analysis | 2013 |
| 25 |
|
Nair R, Sandeep | Finishing of Shafts for Ultra High Speed Gas Bearings | 2008 |
| 26 |
|
Yadav, Krishnakant | Generation of a textured surface using Wire Electrochemical Micromachining and analysis of the wetting behaviour | 2022 |
| 27 |
|
Khan, Mohammad Shahid | Improving Efficiency of Pneumonia Detection in Chest X-Rays Using Convolutional Neural Networks Based Deep Learning Model | 2023 |
| 28 |
|
Sahu, Rohit Kumar | Influence of Zirconia (ZrO2.8Y2O3) Coating on the Copper Tool in EDM Machining | 2021 |
| 29 |
|
Kajal, Sahil | Investigations into Internal Magnetic Abrasive Finishing of a Revolver Barrel | 2015 |
| 30 |
|
Varghese, Anil | Investigations into Rotary Assisted Abrasive Flow Machining (RA-AFM) Process | 2008 |
| 31 |
|
Ilamparithi, J | Laser Micro-Texturing of Ti-6Al-4V Surfaces for Enhanced Wettability Characteristics and Wear Resistance for Biotribological Applications | 2025 |
| 32 |
|
Sathua, Chandra Sekhar | Magnetic abrasive finishing with a ball-end tool and force analysis | 2011 |
| 33 |
|
Rawat, Omprakash | Modeling and Simulation of Magnetic Field Assisted Single Discharge Micro-EDM | 2011 |
| 34 |
|
Karupothula, Prashanth | Modelling and Validation of micro feature generated on metal surface using Electro Chemical Micro Machining (ECMM) | 2016 |
| 35 |
|
Dungroth, Ravi Kumar | Multi-objective optimization of EDM parameters on machining carbon-carbon composites | 2014 |
| 36 |
|
Sharma, Shashank | A Multiphysics Numerical Model for Melt Hydrodynamics in Selective Laser Melting | 2018 |
| 37 |
|
Katiyar, Jitendra Kumar | Novel Synthesis of Micro- and Nano- Granular Fe-Cu alloy by Electric Discharge Machining | 2010 |
| 38 |
|
Choudhary, Hirendra | Numerical simulation and experiments of nano pulsed u.v. laser on metal and polymer | 2012 |
| 39 |
|
Kumar, Hitendra | Parametric Anisotropic BRDF for 3D Reconstruction and Micro-Texture Evaluation | 2016 |
| 40 |
|
Tailor, Piyushkumar B | Performance Evaluation of Abrasive Flow Machining | 2006 |
| 41 |
|
Luwaria, Parth | Permeation of air through a graphene sheet: a molecular dynamics study | 2022 |
| 42 |
|
Islam, Faisal | Prediction and quantification of defect during machining of carbon fiber reinforced polymer (CFRP) composites | 2015 |
| 43 |
|
Raj, Ravi | Process Parameters Optimization in Wire Feed Metal and Polymer Additive Manufacturing | 2017 |
| 44 |
|
Sharma, Vyom | Theoretical and Experimental Analysis of Wire Electrochemical Micromachining (Wire-EMM) Process | 2018 |
| 45 |
|
Dutt Roy, Soumyajyoti | Theoretical Modeling on Magnetic Abrasive Finishing Process | 2009 |
| 46 |
|
Singh, Mahavir | Thin Wall Micromachining of Ti-6Al-4V using Wire Electrical Discharge Machining Process | 2018 |
| 47 |
|
Nandan, Devaki | Vibration assisted Plasma Arc Machining of Mild Steel | 2014 |
| 48 |
|
Kumar, Rajesh | Microstructural Characterization of Deep Drawn Low Carbon Steel | 2006 |
| 49 |
|
Shivaji Shirale, Arvind | Analytical Modelling of Elliptical Vibration Cutting (EVC) to Predict Cutting Forces | 2019 |
| 50 |
|
Yadav, Jyoti | Design and Study of Electromagnetic Broadband Absorbers for Microwave and Infrared Frequencies | 2025 |
| 51 |
|
Parashtekar, Alhad | Development of experimental methodology to Determine the optimum Mechanical operating Pressure for an electrolyser | 2016 |
| 52 |
|
Gowthaman, S | Effect of Attenuating Medium on the Tribology of Laser Peened Armoured steel | 2017 |
| 53 |
|
Kumar, Binit | Effect of carbon morphologies on friction stir deformation of Al 6061 alloy | 2015 |
| 54 |
|
Kumar, Charchit | Fabrication and Flow Analysis of Micro- Channels for Bipolar Plate of Polymer Electrolyte Medium Fuel Cell | 2013 |
| 55 |
|
Dubey, Dhananjay | Finishing of Ball Using Abrasive Flow Finishing | 2017 |
| 56 |
|
Sharma, Dipti | Finishing of helical gears using abrasive flow finishing | 2016 |
| 57 |
|
Chaudhary, Kajal | Flexible and Optically Transparent PVB Protective Coating for ITO-PET based Microwave Metamaterial Absorber | 2019 |
| 58 |
|
Kumar, Dharmesh | Fretting Wear Behavior of Laser Peened Ti-6Al-4V | 2014 |
| 59 |
|
Dayal, Prabhu | Investigations into Electrochemical Milling for the generation of complex 3D Microstructures | 2019 |
| 60 |
|
Kumar, Ashwani | Laser Surface Texturing of Ti-6Al-4V under Confined Environment | 2015 |
| 61 |
|
Singh, Neha | Nano finishing of micro channels for micro reactor | 2014 |
| 62 |
|
Chaubey, Devesh Kumar | Numerical modelling of micro electric discharge machining using multi-spark approach | 2018 |
| 63 |
|
Pandya, Chinmay | Numerical simulation of the Degradation Behavior of Carbon-Carbon composites during Carbonization Process | 2007 |
| 64 |
|
Pandey, Dibyanshu | Parametric optimization and experimental study of cryogenic treated and modified tool geometry in CFRP drilling | 2017 |
| 65 |
|
Kumar, Tarun | Performance Enhancement Of Ti-6Al-4v Alloy In Minimal Quantity Lubrication Grinding Using Nanofluids | 2017 |
| 66 |
|
Singh, Vijay Kumar | Precision machining of high aspect ratio holes in Ti-6Al-4V alloys using magneto-EDM process | 2014 |
| 67 |
|
Murkute, Pratik | Stress corrosion and alternate wear-corrosion effects on the degradation of low carbon steels | 2016 |
| 68 |
|
Kumar Ravi | Surface micro-channeling of metals via Electro-chemical dissolution | 2017 |
| 69 |
|
Gupta, Gopal Ashok | Waste fly ash mixed polymeric media for surface finishing of industrial parts through abrasive flow machining process | 2019 |
| 70 |
|
Dwivedi, Parul | Analysis of Mobile Gamma Ray CT Scanner | 2016 |
| 71 |
|
Shaikh, Rehan Ahmed | Data Error Analysis of In House Built Multi-Detector Gamma Ray CT scanner using first kanpur theorem | 2013 |
| 72 |
|
Srivastav, Abhishek | Design and Development of a Mobile Gamma CT Scanner | 2016 |
| 73 |
|
Kanwal, Virendra Singh | Design of Multidetector System for Gamma Ray Imaging and Nuclear Safety | 2012 |
| 74 |
|
Sharma, Rashmi | Edible Pulse Characterization Using IITK X-Ray Mini CT Scanner | 2014 |
| 75 |
|
Cholla, S Chandra Bose | Investigation of optimizing parameters for Blind Pocket milling using Abrasive water jet machining | 2009 |
| 76 |
|
Mathur, Sudhanshu | Surface Grinding of Duralumin using Minimum Quantity Lubrication | 2015 |
Former M.Des Students
37 Records| S.No. | Image | Scholar Name | Research / Thesis Title | Year |
|---|---|---|---|---|
| 1 |
|
Sekar, Sathish | “DRIFT…” – THREE WHEELER FOR A GREEN RIDE | 2011 |
| 2 |
|
Vimal, C | Design and development of a multi utility asistive device for patients with Parkinson's disease | 2017 |
| 3 |
|
Jagatani, Sairam | Design and Development of an Interactive Board Game, To impart Entrepreneurship skills among students | 2011 |
| 4 |
|
Kushwaha, Pankaj | Design and manufacturing of a medium altitude long endurance unmanned aerial vehicle | 2015 |
| 5 |
|
Lakhani, Kirit | Design For Elderly: Passive Health Monitoring & Object Assistance System | 2016 |
| 6 |
|
Sudheendran Kumar, Amal | Design of a subglottic secretion drainage device and a multi-utility holder for ventilators | 2017 |
| 7 |
|
Sharma, Rajeev | DESIGN OF BUS FASCIA MADE OF SANDWICHED FRP | 2005 |
| 8 |
|
Jeyakumar, M | Design of Math products to impart spatial understanding for primary school students | 2013 |
| 9 |
|
Kurade, Sushil Suresh | Ergonomical interior design for truck cabin | 2016 |
| 10 |
|
Ghongade, Abhitosh | Exploring Vehicular Movements and Behavior at T intersections for Improving Road Safety | 2011 |
| 11 |
|
Dey, Pushpal | Indigenous Design and Development of a Low Cost Manual Sprayer for High Crops | 2017 |
| 12 |
|
Ayyavu, Madhavan | Interactive systems for visually challenged | 2012 |
| 13 |
|
Kumar M, Shiva | Peltify–wearable device for thermoregulation | 2015 |
| 14 |
|
Bhagath, Pagadala Paparao | Products for Physically Challenged | 2015 |
| 15 |
|
Kothari, Rahul | RogMitra : An economical, efficient and portable blood sample collection kit for rural health care | 2016 |
| 16 |
|
Mitra, Akash | To Design the Exterior of a High-end Luxury Inter-state Bus | 2013 |
| 17 |
|
Anandu, Ramesh P T | Assistive Communication system for ICU Patients with Tracheostomy | 2025 |
| 18 |
|
TIwari, Arush | Design and Development of Innovative Air Mattress to Relieve Pressure and Bedsores | 2023 |
| 19 |
|
Usama, Ali | Design for Pride : Empowering ASHA workers through a portable medical toolkit | 2023 |
| 20 |
|
Nishad, Kalpana | Designing an Interactive Kit for Teaching English Alphabets to Visually Impaired Children | 2024 |
| 21 |
|
Perepu Kameswara, Sriram | Designing animal stretcher system through prototyping and material selection | 2023 |
| 22 |
|
Sreshth, Anushka | Designing Interactive Souvenir for IIT Kanpur | 2023 |
| 23 |
|
Kakkar, Rohit | Flip: Play : Release – Designing to reduce stress for young corporate professionals | 2023 |
| 24 |
|
Nupur, Nandita | Guiding Principles for AI Analytical Systems in Managing Production Efficiencies | 2024 |
| 25 |
|
Singh, Neha | Improving the Efficiency and Authenticity of Ticket Verification and Identification for the Indian Railway Environment | 2025 |
| 26 |
|
Kumar, Rishabh | Inclusive Design for Car Cabin | 2025 |
| 27 |
|
Bhavanam, Jaya Chandra Reddy | Innovative Special Purpose Vehicle: A Convertible Mobility Solution for Personal and On-Demand Commercial Use | 2025 |
| 28 |
|
Pandey, Krishan | Integrating ethical AI to automate workflows and streamline Procurement tasks | 2024 |
| 29 |
|
Pansee - Karkare, Amruta A | JIVHAA’ – A Prognostic Tongue Depressor for Paediatricians | 2024 |
| 30 |
|
Sunil, Shreyansh | Making Brainstorming Method Robust for Everyone | 2023 |
| 31 |
|
Akhtar, Md Haseen | Making Frontline Health Workers Entrepreneurs | 2023 |
| 32 |
|
Rai, Madhavi Lata | Medical Emergency Support Application Design for Outstation Travelers | 2023 |
| 33 |
|
Joshi, Yogesh | Modular KAFO with Stance Control Capabilities. | 2022 |
| 34 |
|
Oraon, Aditi | Open-Interact-Birth: An interactive box for mothers in their prenatal journey | 2023 |
| 35 |
|
Gupta, Achal | Snakes and Ladders Reimagined: A Game-Based Framework for Teaching Arithmetic Operations | 2025 |
| 36 |
|
Upadhyay, Shruti | TREAT. RECORD. SHARE: MAKING PATIENT HEALTH RECORD EASY TO MANAGE BY NURSES THROUGH DESIGN THINKING | 2023 |
| 37 |
|
Roshan | Design Research | 2026 |
Former MS Students
4 Records| S.No. | Image | Scholar Name | Research / Thesis Title | Year |
|---|---|---|---|---|
| 1 |
|
Naveen Kumar | A novel method for selective boring of thin-walled tubes using electrochemical micromachining | 2023 |
| 2 |
|
Mahesh Thalkar | Micro patterning of large surface area using multiple electrodes in micro-electrochemical machining process | 2018 |
| 3 |
|
Ambuj Shah | Numerical Study of Transient Thermo-Fluidic Behaviour of the Melt Pool during Laser Welding | 2017 |
| 4 |
|
Akash Tyagi | Theoretical and Experimental Study of Wire Electrochemical Turning Process | 2017 |
Former Dual (B.Tech + M.Tech) Degree Students
4 Records| S.No. | Image | Scholar Name | Research / Thesis Title | Year |
|---|---|---|---|---|
| 1 |
|
Hitendra Kumar | Parametric Anisotropic BRDF for 3D Reconstruction and Micro-Texture Evaluation | 2016 |
| 2 |
|
Karupothula Prashanth | Modelling and Validation of micro feature generated on metal surface using Electro Chemical Micro Machining (ECMM) | 2016 |
| 3 |
|
Ravi Raj | Process Parameters Optimization in Wire Feed Metal and Polymer Additive Manufacturing | 2017 |
| 4 |
|
Akash Tyagi | Theoretical and Experimental Study of Wire Electrochemical Turning Process | 2017 |