Area of Interests
-Carbon
nanotubes,
graphene,
porous carbon,
exfoliated graphite,
-Nanostructured
advanced materials including nanopolymers,
-Multifunctional
and functionally graded composites,
-Nanocomposites
including multiscale composites,
-Carbon-carbon/silicon
composites,
-Finite
element analysis
of polymeric products,
-Roadwheel
of Military Battle Tank Arjuna
-Applications
of materials in Fuel
cell, Lithium
battery, Thermoelectric,
Water
purification, Supercapacitor,
High
performance structural composites,
Catalysis,
and Biomedical
Implants
________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
Prime Minister Sir
Narendra Modi handed over a replica of the Arjun Main Battle Tank (MK-1A) to
Army chief General Manoj Mukund Naravane in Chennai on February 14, 2021.
| Photo Credit: Ragu R
https://www.thehindu.com/news/national/prime-minister-hands-over-indigenous-arjun-tank-to-army/article33834519.ece
It is an
indigenously designed tank which has been developed and manufactured by
CVRDE, DRDO along with 15 academic institutions.
Acknowledgement: Prof. Anil K. Bhowmick (PhD Advisor), IIT-Kharagpur;
Director,
Combat Vehicles Research & Development Establishment (CVRDE); Dr. S.S.
Prasad, IS and Director, DTSR (DRDO); Dr. H.H. Bhargava, Dy Director, DTSR (DRDO);
Mr. Subhas C, Saraf, Chairman and Managing Director, Madras Elastomers
Limited; Friends of Madras Elastomers Limited; and.......
2016
135.
A colorful journey of nanostructured carbon materials: Nanosrishti
technologies private limited (Polymer foundation award
lecture)
Author:
Kamal K. Kar
Reference: National Seminar on Advances in Chemical Science and Technology a
UGC CPE Programme, December 12-13, 2016, organized by Bankim Sardar College
in Collaboration with Prof. Sukumar Maiti Polymer Award Foundation, Venue:
Jadavpur University, Year:2016, pp02
134.
Polymer electrolyte membrane fuel cells: Carbon nanomaterials as Pt=free
cathod catalysts
Authors:
Raghunandan Sharma and Kamal K. Kar
Reference:
National Conference on MEMS, Smart Materials, Structures and Systems (ISSS
NC-8 2016), 28-30 September, Venue: Indian Institute of Technology Kanpur,
Year:2016,
133.
LiFePO4/Li4Ti5O12 fibrous solid state lithium ion batteries as smart fiber
for advanced technological applications
Authors:
Amit K. Yadav and Kamal K. Kar
Reference:National Conference on MEMS, Smart Materials, Structures and
Systems (ISSS NC-8 2016), 28-30 September, Venue: Indian Institute of
Technology Kanpur, Year:2016
132.
Filament
wound composite pipes subjected to lateral loads: A review on damage induced
behavior
Authors:
M.M. Gurav, S.S. Ahankari and K.K. Kar
Reference:
International Conference on Civil Mechanical and Environmental Engineering
Technologies (ICCMEET 2016), 26-27 December, Venue: SVS College of
Engineering, Coimbatore, India, 642203,
ISBN-978-1-941505-42-7 Year:2016, Coimbatore Institute of Information
Technology, pp, 26
131.
Synthesis of N-doped graphene by cow urine
Authors:Pankaj
Chamoli and Kamal K Kar
Reference: International
Conference on "Energy, Functional Materials and Nanotechnology"
(ICEFN-2016), Nainital, Uttarakhand India, 2016, pp.88
130.
Fabrication of Graphene oxides (GO) based rGO-TiO2/Fe3O4
nanocomposite for the removal of Methylene Blue and Arsenic(III) from
water
Authors:Poonam
Benjwal, Manish Kumar, Pankaj Chamoli and Kamal K Kar
Reference:Nanotech
France 2016 and joint international Conference: EGF 2016, NanoMatEn 2016 and
NanoMetrology 2016, Paris-France, June 1st-3rd, 2016,
pp-310
2015
129.
Green synthesis of graphene by cow urine
Authors:
Pankaj Chamoli
and Kamal K. Kar
Reference:
National
Conference on Carbon Materials (NCCM)-15, New Delhi, 2015, pp.149
128.
In situ novel synthesis and thermoelectric performance of PbSe-graphene
composite by utilizing a facile ultrasonic assisted method
Authors:
Chhatrasal Gayner and Kamal K. Kar
Reference:
National conference on Carbon materials (NCCM, NPL New Delhi), pp. 150, 2015
127.
Towards the enhancement of photovoltaic efficiency via hybrid
photovoltaic-thermoelectric module
Authors:
Chhatrasal Gayner, Malay K. Das and Kamal K. Kar
Reference:
18th International Workshop on Physics of Semiconductor Devices
(IWPSD- IISC Bangalore) 2015
126.
Effect of graphite flakes reinforcement on thermo-mechanical properties of
ABS polymer
Authors:
Alok Kumar Pandey, Vashu Singh Kachhavah and Kamal K. Kar
Reference:
National Conference on Carbon Materials (CCM-15), National Physical
laboratory, New Delhi, November 26-28, 2015, pp 41
125.
Study of thermal and mechanical properties of graphite flakes/metal powder
reinforced hdpe composite
Authors:
Samir Pattanayek, Alok Kumar Pandey, Kavita Singh and Kamal K. Kar
Reference:
National Conference on Carbon Materials (CCM-15), National Physical
laboratory, New Delhi, November 26-28, 2015, pp 100
124.
Thermo-mechanical properties evaluation of graphite based polycarbonate
composite
Authors:
Ravindra Kumar, Alok Kumar Pandey, Ravikant Sagar and Kamal K. Kar
Reference:
National Conference on Carbon Materials (CCM-15), National Physical
laboratory, New Delhi, November 26-28, 2015, pp 44
123.
Templated mesoporous carbon electrodes for EDLCs
Authors:
Asheesh Kumar, Kamal K. Kar and Malay K. Das
Reference:
National conference on Materials Science and Technology (NCMST-2105), July
06-08, 2015, IIST, Thiruvananthapuram, p. 79-80
122.
High Performance
porous
carbon
electrodes
for
supercapacitor
Authors:
Asheesh Kumar, Kamal K. Kar and Malay K. Das
Reference:
National conference on Carbon materials, (NCCM15), November 26-28, 2015,
NPL, New Delhi, p. 99
121.
Titania activated carbon (produced from hen feather) for the removal of
methylene blue from waste water
Authors:
Milan Singh,
Poonam Benjwal
and Kamal K. Kar
Reference:
National Conference on Carbon Materials (NCCM 2015), NPL, New Delhi,
November 26th-28th,
2015, pp-21
120.
Enhanced simultaneous removal of methylene blue and lead ions from water by
titania/activated carbon/carbonized epoxy nanocomposite
Authors:
Poonam Benjwal
and Kamal K. Kar
Reference:
National Conference on Carbon Materials (NCCM 2015), NPL, New Delhi,
November 26th-28th,
2015, pp-23
119.
Fibrous
carbon microelectrodes for electrochemical double layer capacitors
Authors:
Cherusseri Jayesh and Kamal K Kar
Reference:
Conference on Microscopy in Materials Science and Biomimetic Technology
organized by Defence Materials and Stores Research and Development
Establishment (DMSRDE) and Academy of Microscope Science and Technology,
February 26-28, 2015, DMSRDE Kanpur, Materials Science Session, MS 11, pp.
56, Year: 2015, India
118.
Thermomechanical
study of graphite flake reinforced polystyrene composites
Authors:
Kavita Singh and Kamal K Kar
Reference:
Conference on Microscopy in Materials Science and Biomimetic Technology
organized by Defence Materials and Stores Research and Development
Establishment (DMSRDE) and Academy of Microscope Science and Technology,
February 26-28, 2015, DMSRDE Kanpur, Materials Science Session, MS 12, pp.
57, Year: 2015, India
117.
Thermal
and mechanical properties of graphite flake reinforced high-density
polyethylene composite: Bipolar plate of PEMFC
Authors:
Kavita Singh and Kamal K Kar
Reference:
Conference on Microscopy in Materials Science and Biomimetic Technology
organized by Defence Materials and Stores Research and Development
Establishment (DMSRDE) and Academy of Microscope Science and Technology,
February 26-28, 2015, DMSRDE Kanpur, Materials Science Session, MS 17, pp.
62, Year: 2015, India
116.
Graphite
flake reinforced polycarbonate composites: Effects on physical, mechanical,
and thermal properties
Authors:
Ravi Kant Sagar and Kamal K Kar
Reference:
Conference on Microscopy in Materials Science and Biomimetic Technology
organized by Defence Materials and Stores Research and Development
Establishment (DMSRDE) and Academy of Microscope Science and Technology,
February 26-28, 2015, DMSRDE Kanpur, Materials Science Session, MS 28, pp.
73, Year: 2015, India
115.
Graphite
flake reinforced polyethylene terephthalate: Thermal, mechanical and
rheological properties
Authors:
Suneel Kumar Sahu and Kamal K Kar
Reference:
Conference on Microscopy in Materials Science and Biomimetic Technology
organized by Defence Materials and Stores Research and Development
Establishment (DMSRDE) and Academy of Microscope Science and Technology,
February 26-28, 2015, DMSRDE Kanpur, Materials Science Session, MS 40, pp.
85, Year: 2015, India
114.
Study
of thermo-mechanical properties of nylon 6/graphite flakes composites
Authors:
Sushmita Baban Singh and Kamal K Kar
Reference:
Conference on Microscopy in Materials Science and Biomimetic Technology
organized by Defence Materials and Stores Research and Development
Establishment (DMSRDE) and Academy of Microscope Science and Technology,
February 26-28, 2015, DMSRDE Kanpur, Materials Science Session, MS 42, pp.
87, Year: 2015, India
113.
ABS/Graphite
flakes composite as bipolar plate: Study of mechanical, thermal and
rehological propertie
Authors:
Vashu Singh Kachhavah and Kamal K Kar
Reference:
Conference on Microscopy in Materials Science and Biomimetic Technology
organized by Defence Materials and Stores Research and Development
Establishment (DMSRDE) and Academy of Microscope Science and Technology,
February 26-28, 2015, DMSRDE Kanpur, Materials Science Session, MS 46, pp.
91, Year: 2015, India
112.
Studies
of mechanical and structural properties of polypropylene composite filled
with graphite flakes
Authors:
Virendra Singh Rathore and Kamal K Kar
Reference:
Conference on Microscopy in Materials Science and Biomimetic Technology
organized by Defence Materials and Stores Research and Development
Establishment (DMSRDE) and Academy of Microscope Science and Technology,
February 26-28, 2015, DMSRDE Kanpur, Materials Science Session, MS 48, pp.
93, Year: 2015, India
111.
Thermomechanical
properties of coil carbon nanotube coated carbon fiber reinforced polymer
nanocomposites
Authors:
Alok Kumar Pandey, Amit K Yadav, Raghunandan Sharma, Vinay Panwar and Kamal
K Kar
Reference:
Conference on Microscopy in Materials Science and Biomimetic Technology
organized by Defence Materials and Stores Research and Development
Establishment (DMSRDE) and Academy of Microscope Science and Technology,
February 26-28, 2015, DMSRDE Kanpur, Nanoscience Session, N 03, pp. 97,
Year: 2015, India
110.
Mechanical
properties of nickel coated carbon fiber reinforced epoxy nanocomposites:
Effect of coating time
Authors:
Amit K. Yadav and Kamal K Kar
Reference:
Conference on Microscopy in Materials Science and Biomimetic Technology
organized by Defence Materials and Stores Research and Development
Establishment (DMSRDE) and Academy of Microscope Science and Technology,
February 26-28, 2015, DMSRDE Kanpur, Nanoscience Session, N 04, pp. 98,
Year: 2015, India
109.
UV-VIS
irradiation driven photocatalytic performance analysis of nanocomposite made
of reduced graphene oxide–Fe3O4 /TiO2
through adsorption and photocatalytic degradation of industrial dumped water
Authors:
Manish Kumar, Pankaj Chamoli and Kamal K Kar
Reference:
Conference on Microscopy in Materials Science and Biomimetic Technology
organized by Defence Materials and Stores Research and Development
Establishment (DMSRDE) and Academy of Microscope Science and Technology,
February 26-28, 2015, DMSRDE Kanpur, Nanoscience Session, N 17, pp. 111,
Year: 2015, India
108.
Synthesis
of zn-doped titania nanotubes and investigation of their visible
photocatalytic activity
Authors:
Poonam Benjwal and Kamal K Kar
Reference:
Conference on Microscopy in Materials Science and Biomimetic Technology
organized by Defence Materials and Stores Research and Development
Establishment (DMSRDE) and Academy of Microscope Science and Technology,
February 26-28, 2015, DMSRDE Kanpur, Nanoscience Session, N 23, pp. 117,
Year: 2015, India
107.
Electrodeposition
of platinum nanoparticles on carbon nanotubes for oxygen reduction reaction
catalysis: Effect of coating time
Authors:
Raghunandan Sharma and Kamal K Kar
Reference:
Conference on Microscopy in Materials Science and Biomimetic Technology
organized by Defence Materials and Stores Research and Development
Establishment (DMSRDE) and Academy of Microscope Science and Technology,
February 26-28, 2015, DMSRDE Kanpur, Nanoscience Session, N 25, pp. 119,
Year: 2015, India
106.
Al3+
immobilized phosphotungstic acid / sulfonated polyetheretherketone
nanocomposite membrane for fuel cell application
Authors:
Soma Banerjee and Kamal K Kar
Reference:
Conference on Microscopy in Materials Science and Biomimetic Technology
organized by Defence Materials and Stores Research and Development
Establishment (DMSRDE) and Academy of Microscope Science and Technology,
February 26-28, 2015, DMSRDE Kanpur, Nanoscience Session, N 29, pp. 123,
Year: 2015, India
105.
Porous
carbon: Material for electrical double layer capacitors
Authors:
Asheesh Kumar, Kamal K Kar and Malay K Das
Reference:
Conference on Microscopy in Materials Science and Biomimetic Technology
organized by Defence Materials and Stores Research and Development
Establishment (DMSRDE) and Academy of Microscope Science and Technology,
February 26-28, 2015, DMSRDE Kanpur, Microscopy and Characterization
Session, MC 04, pp. 154, Year: 2015, India
104.
Dopant
dependent Raman studies of narrow band gap lead selenide thermoelectric
material
Authors:
Chhatrasal Gayner and Kamal K Kar
Reference:
Conference on Microscopy in Materials Science and Biomimetic Technology
organized by Defence Materials and Stores Research and Development
Establishment (DMSRDE) and Academy of Microscope Science and Technology,
February 26-28, 2015, DMSRDE Kanpur, Microscopy and Characterization
Session, MC 06, pp. 156, Year: 2015, India
103.
Aluminium
substituted nickel ferrite nano adsorbents for drinking water purification
Authors:
Yaswanth K. Penke, J. Ramkumar and Kamal K Kar
Reference:
Conference on Microscopy in Materials Science and Biomimetic Technology
organized by Defence Materials and Stores Research and Development
Establishment (DMSRDE) and Academy of Microscope Science and Technology,
February 26-28, 2015, DMSRDE Kanpur, Microscopy and Characterization
Session, MC 26, pp. 178, Year: 2015, India
2014
102.
Multiwalled
carbon nanotube forest/carbon fiber as electrode/current collector
integrated system for supercapacitors
Authors:
Jayesh
Cherusseri and Kamal K Kar
Reference:
National conference on materials science and technology - 2014 (NCMST-14),
Department of Chemistry, Indian Institute of Space Science and Technology
(IIST), Thiruvananthapuram from 28-30 July-2014, India
101.
Amazing
World of Carbon Materials
Authors:
Kamal K
Kar
Reference:
International Conference on polymers and allied materials, May 30-31, 2014,
in association with Hari Shankar Singhania Elastomer And Tyre Research
Institute (HASETRI), Hotel Maurya Patna, India
2013
100.
Synthesis
and characterization of carbon nanotubes grown on carbon fiber /polypyrrole
nanocomposite electrode for supercapacitors
Authors:
Jayesh
Cherusseri, Raghunandan Sharma and Kamal K Kar
Reference:
NANOINDIA
2013,
February 19-20,
2013, CSIR – National Institute for Interdisciplinary Science and Technology
(NIIST), Trivandrum, Kerala, India
99.
Synthesis
and characterization of exfoliated graphite based highly conductive
composite bipolar plates for PEM fuel cell
Authors:
Rajeev
Kumar Gautam and Kamal K. Kar
Reference:IUMRS-ICA,
Indian Institute
of Science Bangalore, December 16-20, 2013, India
98.
Fabrication
of carbon/phenolic resin nanocomposites bipolar plates for PEM fuel cell
Authors: Rajeev
Kumar Gautam and Kamal K. Kar
Reference: Third
federation of Asian polymer society (FAPS), Polymer congress and macro,
Indian Institute of Science Bangalore, May 15-18, 2013.
2012
97.
Coiled
carbon nanotube (CCNT) grown on carbon fiber / polypyrrole composite
electrode for supercapacitors
Authors: Jayesh
Cherusseri, Raghunandan Sharma and Kamal K Kar
Reference:
December 3-4, 2012, Dept. of Physics, Karunya University, Coimbatore,
Tamilnadu. National Conference on Nanomaterials 2012 (NCN 2012), India
96.
Coiled
carbon nanotube (CCNT) coated carbon fiber /PEDOT: PSS composite electrode
for supercapacitors
Authors: Jayesh
Cherusseri, Raghunandan Sharma, and Kamal K Kar
Reference:
November1- 3, 2012, Bhabha Atomic Research Centre, Mumbai, Maharashtra,
National Conference on Carbon Materials 2012 (CCM12), pp.82, Year: 2012,
India
95.
Carbon
nanomaterial (carbon nanotube/carbon nanofiber/carbon nanocoil/ carbon
microcoil) coated glass fiber reinforced epoxy nanocomposites
Authors: Kamal
K. Kar and Ariful Rahaman
Reference:
November 1- 3, 2012, Bhabha Atomic Research Centre, Mumbai, Maharashtra,
National Conference on Carbon Materials 2012 (CCM12), pp.37, Year: 2012
94.
Experimental
investigation on carbon nanotube based multiscale composites
Authors: Alok K.
Pandey, Prabhat K. Agnihotri and Kamal K. Kar
Reference:
November 1- 3, 2012, Bhabha Atomic Research Centre, Mumbai, Maharashtra,
National Conference on Carbon Materials 2012 (CCM12), pp.105, Year: 2012
93.
Carbon
based materials (graphene, carbon nanotube, carbon composites): The
new outlook as thermoelectric materials
Authors:
Chhatrasal Gayner and Kamal K. Kar
Reference:
November 1- 3, 2012, Bhabha Atomic Research Centre, Mumbai, Maharashtra,
National Conference on Carbon Materials 2012 (CCM12), pp. 53, Year: 2012
92.
Preparation
of exfoliated graphite by microwave irradiation and its further use in
multilayer graphene synthesis
Authors: Rajeev
K. Gautam and Kamal K. Kar
Reference:
November 1- 3, 2012, Bhabha Atomic Research Centre, Mumbai, Maharashtra,
National Conference on Carbon Materials 2012 (CCM12), pp.74, Year: 2012
91.
Role
of carbon nanostructured graphene for improving the performance of organic
photovoltaic devices
Authors: Pankaj
Chamoli and Kamal K Kar
Reference:
November 1- 3, 2012, Bhabha Atomic Research Centre, Mumbai, Maharashtra,
National Conference on Carbon Materials 2012 (CCM12), pp.55, Year: 2012
90.
Dye
molecules for dye sensitized solar cells: Recent development
Authors: Poonam
and Kamal K. Kar
Reference:
November 1- 3, 2012, Bhabha Atomic Research Centre, Mumbai, Maharashtra,
National Conference on Carbon Materials 2012 (CCM12), pp. 54, Year: 2012
89.
Influence
of surface activation on the growth of amorphous Ni/Ni-Co nanoparticles on
carbon fiber by electroless coating
Authors:
Raghunandan Sharma and Kamal K. Kar
Reference:
November 1- 3, 2012, Bhabha Atomic Research Centre, Mumbai, Maharashtra,
National Conference on Carbon Materials 2012 (CCM12), pp.110, Year: 2012
88.
Synthesis
and characterization of polymer electrolyte membrane for fuel cell
application
Authors: Soma
Banerjee, Subhomoy Das, Manas K. Ghorai, and Kamal K Kar
Reference:
November 1- 3, 2012, Bhabha Atomic Research Centre, Mumbai, Maharashtra,
National Conference on Carbon Materials 2012 (CCM12), pp. 124, Year: 2012
87.
Structural
and conductivity studies of poly (vinylidene fluoride –co-
hexafluoropropylene) – lithium triflate solid polymer electrolyte
Authors: M.
Suresh, D. P. Singh, Prashik K. Gajbhiye, K. Shahi, and Kamal K. Kar
Reference:
November 1- 3, 2012, Bhabha Atomic Research Centre, Mumbai, Maharashtra,
National Conference on Carbon Materials 2012 (CCM12), pp. 125, Year: 2012
86.
Mechanical
properties of coiled carbon nanotube coated carbon fiber/epoxy composites:
Effect of growth time
Authors: Vinay
Panwar, Raghunandan Sharma, and Kamal K Kar
Reference:
November 1- 3, 2012, Bhabha Atomic Research Centre, Mumbai, Maharashtra,
National Conference on Carbon Materials 2012 (CCM12), pp.10, Year: 2012
85.
Effect of straight carbon nanotube (CNT)
length on the mechanical properties of CNT coated carbon fiber/epoxy
composites
Authors: Amit
Kumar Yadav, Raghunandan Sharma and Kamal K Kar
Reference:
November 1- 3, 2012, Bhabha Atomic Research Centre, Mumbai, Maharashtra,
National Conference on Carbon Materials 2012 (CCM12), pp.104 Year: 2012
84.
The
reactant flow fnalysis of single-serpentine and straight – parallel flow
channel of bipolar plate for polymer electrolyte membrane fuel cell
Authors: Charchit
Chauhan, J. Ramkumar, and Kamal K Kar
Reference:
November 1- 3, 2012, Bhabha Atomic Research Centre, Mumbai, Maharashtra,
National Conference on Carbon Materials 2012 (CCM12), pp.15, Year: 2012
83.
Inhomogeneous
compression of carbon fibers in PEM fuel cells
Authors: Arjun
Ravichandran, Malay K. Das and Kamal K. Kar
Reference:
November 1- 3, 2012, Bhabha Atomic Research Centre, Mumbai, Maharashtra,
National Conference on Carbon Materials 2012 (CCM12), pp.123, Year: 2012
82.
Thermo-oxidative
degradation and life estimation of carbon fiber and its composites
Authors: Rahul
Yadav, Saurav Kumar, Raghunandan Sharma, Malay K. Das and Kamal K. Kar
Reference:
November 1- 3, 2012, Bhabha Atomic Research Centre, Mumbai, Maharashtra,
National Conference on Carbon Materials 2012 (CCM12), pp.33, Year: 2012
81.
Synthesis of exfoliated graphite/phenolic
resin composites for polymer electrolyte membrane fuel cell bipolar plate
Authors: Aruna
Devi and Kamal K. Kar
Reference:
November 1- 3, 2012, Bhabha Atomic Research Centre, Mumbai, Maharashtra,
National Conference on Carbon Materials 2012 (CCM12), pp. 13, Year: 2012
80.
Design of microchannels in bipolar plate
for efficient water management in polymer electrolyte membrane fuel cells
Authors: Asheesh
Kumar, Kamal K. Kar and M. K. Das
Reference:
November 1- 3, 2012, Bhabha Atomic Research Centre, Mumbai, Maharashtra,
National Conference on Carbon Materials 2012 (CCM12), pp. 126, Year: 2012
2010
79.
Synthesis
of various carbon nanomaterials: Effects of CVD parameters
Authors: A.
Rahaman, R. Sharma and Kamal K. Kar
Reference:
International Conference on Carbon Nanotechnology: Potential and Challenges,
Carbon Nanotechnology: Potential and Challenges,
December 15-17,
2010, IIT-Kanpur,
ISBN:13:978-981-08-7716-3,
ISBN:
10:981-08-7716-1
78.
Development
of high strength functional-PEEK/HA/CNF bionanocomposite
Authors: S.
Pramanik and Kamal K. Kar
Reference:
International Conference on Carbon Nanotechnology: Potential and Challenges,
Carbon Nanotechnology: Potential and Challenges,
December 15-17,
2010, IIT-Kanpur,
ISBN:13:978-981-08-7716-3,
ISBN:
10:981-08-7716-1
77.
Carbon
nanotube coated tungsten filament: Incandescence and field emission
properties
Authors: R.
Sharma, S.R. Punugupati and Kamal K. Kar
Reference:
International Conference on Carbon Nanotechnology: Potential and Challenges,
Carbon Nanotechnology: Potential and Challenges,
December
15-17, 2010, IIT-Kanpur,
ISBN:13:978-981-08-7716-3,
ISBN:
10:981-08-7716-1
76.
Field
emission study of carbon tubes coated kanthal wire
Authors: S.R.
Punugupati and Kamal K. Kar
Reference:
International Conference on Carbon Nanotechnology: Potential and Challenges,
Carbon Nanotechnology: Potential and Challenges,
December 15-17,
2010, IIT-Kanpur,
ISBN:13:978-981-08-7716-3,
ISBN:
10:981-08-7716-1
75.
Synthesis
of carbon nanocoils /microcoils coated carbon fiber: Effect of growth
parameters
Authors: R.
Sharma and Kamal K. Kar
Reference:
International Conference on Carbon Nanotechnology: Potential and Challenges,
Carbon Nanotechnology: Potential and Challenges,
December 15-17,
2010, IIT-Kanpur,
ISBN:13:978-981-08-7716-3,
ISBN:
10:981-08-7716-1
74.
Carbon
nanotubes and Kirchoff’s Elastica
Authors: P.
Agnihotri, S. Basu and Kamal K. Kar
Reference:
International Conference on Carbon Nanotechnology: Potential and Challenges,
Carbon Nanotechnology: Potential and Challenges,
December 15-17,
2010, IIT-Kanpur,
ISBN:13:978-981-08-7716-3,
ISBN:
10:981-08-7716-1
73.
Effect
of CNT Growth time on the properties of CNT-Coated carbon fiber/polyester
composites
Authors: P.
Agnihotri, S. Basu and Kamal K. Kar
Reference:
International Conference on Carbon Nanotechnology: Potential and Challenges,
Carbon Nanotechnology: Potential and Challenges,
December 15-17,
2010, IIT-Kanpur,
ISBN:13:978-981-08-7716-3,
ISBN:
10:981-08-7716-1
72.
Synthesis
of carbon nanotube coated alumina for alumina matrix composites
Authors: N. P.
Reddy, R. Sharma and Kamal K. Kar
Reference:
International Conference on Carbon Nanotechnology: Potential and Challenges,
Carbon Nanotechnology: Potential and Challenges,
December 15-17,
2010, IIT-Kanpur,
ISBN:13:978-981-08-7716-3,
ISBN:
10:981-08-7716-1
71.
Exfoliated
graphite for heavy oil sorption
Authors: N. Sykam
and Kamal K. Kar
Reference:
International Conference on Carbon Nanotechnology: Potential and Challenges,
Carbon Nanotechnology: Potential and Challenges,
December 15-17,
2010, IIT-Kanpur,
ISBN:13:978-981-08-7716-3,
ISBN:
10:981-08-7716-1
70.
Carbon
nanomaterial coated glass fiber reinforced epoxy composites
Authors: A.
Rahaman, R. Sharma and Kamal K. Kar
Reference:
International Conference on Carbon Nanotechnology: Potential and Challenges,
Carbon Nanotechnology: Potential and Challenges,
December
15-17, 2010, IIT-Kanpur,
ISBN:13:978-981-08-7716-3,
ISBN:
10:981-08-7716-1
2008
69.
Rheological
characterization and performance evaluation of a new medium developed for
abrasive flow finishing
Authors:
M. Ravi
Sankar, V. K. Jain, J. Ramkumar, and Kamal K. Kar
Reference:
2nd
International and 23rd All India Manufacturing
Technology,
Design and Research conference, December 2008, IIT Madras (India),
Pages 449-454.
68.
Composite: Rheological characterization
and performance evaluation of a new medium developed for abrasive flow
finishing
Authors:
M. Ravi Sankar, V. K. Jain, J. Ramkumar, Kamal K. Kar
Reference:
2nd International and 23rd All India Manufacturing Technology, Design and
Research conference, IIT Madras (India).
67.
Rubber composite: A deformable nano
finishing tool for viscoelastic flow finishing process
Authors:Piyushkumar
B Tailor, J. Ramkumar, Kamal K. Kar
Reference:
ICCE, KUNMING CHINA.
2007
66.
Rheological
characterization of uncured alumina filled butyl composite
Authors:
Piyushkumar B Tailor, J Ramkumar, and Kar Kamal K
Reference:
International conference on advanced design and manufacturing (ICADM 2007),
Sethu Institute of technology, Kariapatti, 9-11 August 2007, p 68-72
65.
High molecular weight (MW) nano
sized polyethylene (PE): Effect of particle size, macro-micro-nano
Authors:P.
Paik, and
Kamal K. Kar
Reference:
Annual Technical
Conference, ANTEC
2007 : May 06-110, 2007,
Cincinnati, Ohio,
USA
64.
Hybrid nanocomposites of carbon
nanotubes (CNTs) grown on carbon fiber in polyester matrix with improved
thermomechanical properties
Authors:
P. Agnihotri and Kamal
K. Kar
Reference:
Annual Technical
Conference, ANTEC
2007 : May 06-110, 2007,
Cincinnati, Ohio,
USA
63.
Molecular dynamics simulation of
deformation behaviour of carbon nanotubes under generic mode of loading
Authors:P.
Agnihotri S. Basu and
Kamal K. Kar
Reference:
Annual Technical
Conference, ANTEC
2007 : May 06-110, 2007,
Cincinnati, Ohio,
USA
62.
Apatite-Poly (Ether Etherketone)
nanocomposites: prosthesis materials:
SBF-conditioned study
Authors:
S. Pramanik and Kamal K. Kar
Reference:
Annual Technical
Conference, ANTEC
2007 : May 06-110, 2007,
Cincinnati, Ohio,
USA
61.
Functionally graded polymer
nanocomposites (FGPNCs) filled with nano sized filler
Authors:
Ahankari Sandeep S. and
Kamal K. Kar
Reference:
Annual Technical
Conference, ANTEC
2007 : May 06-110, 2007,
Cincinnati, Ohio,
USA
60.
Studies on the thermomechanical
properties of nickel phosphorous coated carbon fiber fabric/polyester
laminates
Authors:N.
Patra, Kamal K.
Kar
Reference:
Annual Technical
Conference, ANTEC
2007 : May 06-110, 2007,
Cincinnati, Ohio,
USA
59.
Composite: A deformable nano finishing
tool
Authors:
Piyushkumar B. Tailor, J. Ramkumar and Kamal. K. Kar
Reference:
International and INCCOM-6 conference on future trends in composite
materials and processing, India.
2006
58.
Glass
transition temperature of high molecular weight polystyrene: Effect of
particle size, bulk to micron to nano
Authors:
Pradip Paik and
Kamal K. Kar
Reference:
Nanotech, May 7-11, Year: 2006, Nano Science & Technology Institute, Boston,
Cambridge, Massachusetts, USA
57.
Atomistically
informed continuum analysis of carbon nanotubes
Authors:
Prabhat Agnihotri, Kamal K. Kar and S. Basu
Reference:
Proceedings of ICCMS-06, IIT-Guwahati, 8-10th December,
2006
pp. 2088-2093
56.
Experimental
study of carbon nanotubes based polymer matrix composites
Authors: Prabhat
Agnihotri, Sumit Basu and Kamal K. Kar
Reference:
Indo-EU thematic workshop IISc Banglore, 20th February, 2006
55.
Influence
of process parameters of electroless nickel-phosphorous coating on carbon
fibers
Authors: Prabhat
Agnihotri, Ariful Rahaman, Niranjana Patra, J.Ramkumar, S. Basu, Kamal K.
Kar and D.Sathiyamoorthy
Reference:
Proceedings on International Conference on Advances in Materials processing
and Characterization-AMPC(2006), 28-30th August 2006, Anna
University, College of Engineering, Chennai, Vol.2, pp.128-132, India
54.
In-vitro
study of apatite-poly(ether ether ketone) nanocomposites: Prosthesis
materials
Authors:
Sumit
Pramanik and Kamal K. Kar
Reference: ISAMPE
National Conference on Composites INCCOM-5, Advanced Systems Laboratory,
Kanchanbagh, Hyderabad, November-24-25, 2006,
pp. 583-592,
India
53.
Synthesis
and characterization of high molecular weight nano sized polyethylene:
Effect of particles size macro-micro-nano
Authors: Pradip
Paik and Kamal K. Kar
Reference: ISAMPE
National Conference on Composites INCCOM-5, Advanced Systems Laboratory,
Kanchanbagh, Hyderabad, November-24-25, 2006, pp. 573-582, India
52.
Preparation
and mechanical behaviour of functionally graded elastomers nanocomposites
filled with nanosized fillers
Authors:
Ahankari Sandeep S. And Kamal K. Kar
Reference: ISAMPE
National Conference on Composites INCCOM-5, November-24-25, 2006, Advanced
Systems Laboratory, Kanchanbagh, Hyderabad, pp. 562-572, India
51.
Preparation
and characterization of nano-crystalline alumina and its anocomposites made
of acrylonitrile-butadiene-styrene polymer
Authors:
S.
Srivastav, Ariful Rahaman, J. Ramkumar,
Kamal
K. Kar
and S.
K. Nayak
Reference: ISAMPE
National Conference on Composites INCCOM-5, Advanced Systems Laboratory,
Kanchanbagh, Hyderabad, November-24-25, 2006, pp. 552-561, India
50.
Synthesis
and characterization of carbon nanotubes on carbon fibers by thermal
chemical vapour deposition
Authors: Prabhat
Agnihotri, Ariful Rahaman and Kamal K. Kar
Reference: ISAMPE
National Conference on Composites INCCOM-5, Advanced Systems Laboratory,
Kanchanbagh, Hyderabad, November-24-25, 2006, pp. 540-551, India
49.
Nano
particles coated carbon fibers for structural applications: Preparation and
characterizations
Authors: Prabhat
Agnihotri, Akhil Kumar, Ariful Rahaman and Kamal K. Kar
Reference: ISAMPE
National Conference on Composites INCCOM-5, Advanced Systems Laboratory,
Kanchanbagh, Hyderabad, November-24-25, 2006, pp. 528-539, India
48.
Model
experiments to study the shrinkage behaviour of resol resin during pyrolysis
of carbon-carbon composites
Authors: Chinmay
Pandya, N. L. Ravikumar and Kamal K. Kar
Reference: ISAMPE
National Conference on Composites INCCOM-5, Advanced Systems Laboratory,
Kanchanbagh, Hyderabad, November-24-25, 2006, pp.300, India
47.
Composition,
microstructure and thermal properties of electroless coated thin Co-P films
on carbon fibers
Authors:
Niranjana Patra and Kamal K. Kar
Reference: ISAMPE
National Conference on Composites INCCOM-5, Advanced Systems Laboratory,
Kanchanbagh, Hyderabad, November-24-25, 2006, pp. 226-239, India
46.
Electroless
deposition of Ni-P coating on E-glass fibers: Effect of process parameters
Authors:
Ariful
Rahaman and Kamal K. Kar
Reference: ISAMPE
National Conference on Composites INCCOM-5, Advanced Systems Laboratory,
Kanchanbagh, Hyderabad, November-24-25, 2006, pp. 215-225, India
45.
Effect
of nanosized amorphous carbon and curing agents on carbonization behaviour
of carbon-carbon composites through physical and thermal properties
Authors:
Soumya
Sarkar and Kamal K. Kar
Reference: ISAMPE
National Conference on Composites INCCOM-5, Advanced Systems Laboratory,
Kanchanbagh, Hyderabad, November-24-25, 2006, pp. 201-214, India
44.
Finite
element analysis of rubber pressure moulding technique to fabricate complex
shaped fiber reinforced plastic components
Authors:
S. D.
Sharma, Prashant Kumar, A. Mohanty, J. Ramkumar, R. K. Appaji and Kamal
K. Kar
Reference: ISAMPE
National Conference on Composites INCCOM-5, Advanced Systems Laboratory,
Kanchanbagh, Hyderabad, November-24-25, 2006, pp. 83-96, India
43.
Abrasive flow machining of carbon-carbon
composites using styrene butadiene rubber
Authors:
Piyush B Tailor, Ahankari S. Sureshrao, Ramkumar J. and Kamal K. Kar
Reference:
Nano Finishing, IRIkerala 2006, India
42.
Fabrication of ABS-Alumina
nanocomposites
Authors:
S. Srivastava, J. Ramkumar and Kamal. K. Kar
Reference:
Indo-Japan Workshop on Nanotechnology composites, IIT-Kanpur
2005
41.
Hybrid
nanocomposites of carbon nanotubes grown on carbon fiber for structural
applications
Authors:
Kamal K. Kar
Reference:
ICAMDD-2005, International Conference on Advanced Materials Design and
Development, 14-16 December, 2005, Goa. India
40.
Hybrid
nanocomposites of carbon nanotube grown on carbon fiber for structural
applications
Authors:
Kamal K. Kar
Reference: Proc.
Nanomaterials for spacecraft structural and thermal applications, 28th
October 2005, ISRO Satellite Centre, Bangalore, pp. 1-14, India
2004
39.
Development
of rubber pressure molding technique to fabricate fiber reinforced plastic
components using natural rubber and polyester/epoxy resin
Authors:
Kamal K. Kar
Shiv D.
Sharma, Prashant Kumar and Joshua U. Otaigbe
Reference:
Annual Technical
Conference, ANTEC
2004 : May 16 - 20, 2004, Chicago's Navy Pier, Chicago, Illinois, USA
38.
Synthesis
and characterization of nanopolymer: High density polyethylene
Authors:
Kamal K. Kar,
P.Paik, J.U. Otaigbe
Reference:
Annual Technical
Conference, ANTEC
2004 : May 16 - 20, 2004, Chicago's Navy Pier, Chicago, Illinois, USA
37.
Characterization
of structure and viscoelastic properties of polypropylene nanopolymer
Authors:
Kamal K. Kar,
P. Paik and J.U. Otaigbe
Reference:
Annual Technical
Conference, ANTEC
2004 : May 16 - 20, 2004, Chicago's Navy Pier, Chicago, Illinois, USA
36.
Synthesis and characterization of
nano-polystyrene: Effect of temperature, shear rate and solvents
Authors:
Kamal K. Kar,
Rakesh Kumar Pradip Paik and Joshua U. Otaigbe
Reference:
Annual Technical
Conference, ANTEC
2004 : May 16 - 20, 2004, Chicago's Navy Pier, Chicago, Illinois, USA
35.
Scanning
electron microscopy, spectroscopy and viscoelastic studies of nano low
density polyethylene
Authors:
Kamal K. Kar,
Pradip Paik, Suresrao, A. S. and Joshua U Otaigbe
Reference:
Annual Technical
Conference, ANTEC
2004 : May 16 - 20, 2004, Chicago's Navy Pier, Chicago, Illinois, USA
34.
Rheological
characterization of liquid crystal polymers (Xydar-300, Xydar-400 and
Xydar-900) measured in ARES spectrometer
Authors:
Kamal K. Kar
and J.U. Otaigbe
Reference:
Annual Technical
Conference, ANTEC
2004 : May 16 - 20, 2004, Chicago's Navy Pier, Chicago, Illinois, USA
33.
A
rheological model for quantitative prediction of die swell: effect of shear
rate and temperature
Authors:
Kamal K. Kar,
S.Gupta and J.U. Otaigbe
Reference:
Annual Technical
Conference, ANTEC
2004 : May 16 - 20, 2004, Chicago's Navy Pier, Chicago, Illinois, USA
32.
Hysteresis
loss of polymeric materials: Finding of new dimensionless parameters
Authors:
Kamal K. Kar,
A.K. Bhowmick and J.U. Otaigbe
Reference:
Annual Technical
Conference, ANTEC
2004 : May 16 - 20, 2004, Chicago's Navy Pier, Chicago, Illinois, USA
31.
Finite
element analysis of hyperelastic materials: Elastomeric seal
Authors:
M. Rawat, Kamal K. Kar and
J.U. Otaigbe
Reference:
Annual Technical
Conference, ANTEC
2004 : May 16 - 20, 2004, Chicago's Navy Pier, Chicago, Illinois, USA
30.
Spectroscopy, scanning electron
microscopy, thermal and viscoelastic studies of nanopolystyrene polymer
Authors:
R.
Kumar, Kamal K. Kar, and P. Paik
Reference: The
XIV international congress on Rheology 2004, August 22-27, 2004,
Seoul, Koria
29.
Synthesis, structure, thermal and
viscoelastic studies of nano high density polyethylene: Effect of
temperature, shear rate and solvent
Authors:
P.Paik, and
Kamal K. Kar
Reference: The
XIV international congress on Rheology 2004, August 22-27, 2004,
Seoul, Koria
28.
Controlled synthesis of spherical
nanopolymer made of low density polyethylene
Authors: A.S.
Suresrao, P. Paik and Kamal K. Kar
Reference: The
XIV international congress on Rheology 2004, August 22-27, 2004,
Seoul, Koria
27.
Simple method to synthesis spherical
and high percentage nano polypropylene polymer
Authors: P. Paik
and Kamal K. Kar
Reference: The
XIV international congress on Rheology 2004, August 22-27, 2004,
Seoul, Koria
26.
Optimization for design parameters
of elastomeric seal-simple geometry: Finite element analysis
Authors:
Kamal K. Kar,
M. Rawat, P. Agnihotri and J. U. Otaigbe
Reference:
Advances in Polymer Technology 2004, Cochin University of Science and
Technology, India, 16th-17th January 2004
25.
Finite element analysis of
elastomeric seal
Authors: M.
Rawat, Kamal K. Kar and J.U. Otaigbe
Reference: India
Rub Tech Expo 2004, National conference and exposition on rubber and allied
materials, February 13-14, 2004, Mysore (Karnataka), India
24.
Quantitative prediction of heat
generation in polymeric materials:Development of new dimensionless
parameters
Authors:
Kamal K. Kar,
A.S. Suresrao, A.K. Bhowmick and J.U. Otaigbe
Reference
Advances in Polymer Technology 2004, Cochin University of Science and
Technology, India, 16th-17th January 2004:
23.
Hysteresis loss of rubber
vulcanizates: Development of dimensionless parameters
Authors:
Kamal K. Kar,
A.K. Bhowmick and J.U. Otaigbe
Reference: India
Rub Tech Expo 2004, National conference and exposition on rubber and allied
materials, February 13-14, 2004, Mysore (Karnataka), India
22.
Proposal of universal dimensionless
parameters describing the heat generation of polymeric materials
Authors:
Kamal K. Kar
and A.K. Bhowmick
Reference: The
XIV international congress on Rheology 2004, August 22-27, 2004
pp.:
AR08-1-AR08-3, Seoul, Koria
21.
A constitutive analysis of die swell
for commercial polyethylene, polypropylene and polystyrene: A predictive
model
Authors:
Kamal K. Kar,
P. Agnihotri, S. Gupta and J.U. Otaigbe
Reference:
Advances in Polymer Technology 2004, Cochin University of Science and
Technology, India, 16th-17th January 2004
20.
The die swell of commercial
polyethylene, polypropylene and polystyrene: Comparison of experimental
behavior with Tanner, Macoscow and Proposed models
Authors:
Kamal K. Kar
and S. Gupta
Reference: The
XIV international congress on Rheology 2004, August 22-27, 2004,
pp.:
PM12-1-PM12-3, Seoul, Koria
19.
Nonlinear viscoelastic
behavior/Rheology of xydar in the melt
Authors:
Kamal K. Kar
Reference: The
XIV international congress on Rheology 2004, August 22-27, 2004,
pp:
NF42-1-NF42-3, Seoul, Koria
18.
Development of rubber pressure
moulding technique using natural rubber
Authors: S.D.
Sharma, S.K. Behera, T.K. Saha, P.Kumar, J.U. Otaigbe and Kamal K. Kar
Reference: India
Rub Tech Expo 2004, National conference and exposition on rubber and allied
materials, February 13-14, 2004, Mysore (Karnataka), India
17.
Newly developed rubber pressure
molding technique to fabricate fiber reinforced plastic components
Authors:
S.D.
Sharma, P. Kumar and Kamal K. Kar
Reference: The
XIV international congress on Rheology 2004, August 22-27, 2004,
Seoul, Koria
16.
New synthesis of spherical and high
percentage nano polystyrene polymer
Authors:
Rakesh
Kumar, Pradip Paik, Kamal K. Kar and Joshua U. Otaigbe
Reference:
Advances in Polymer Technology 2004, Cochin University of Science and
Technology, India, 16th-17th January 2004, pp.:
442-448
15.
Synthesis and characterization of
nano polyethylene: Influence of temperature and shear rate
Authors:
Pradip
Paik, Kamal K. Kar and Joshua U. Otaigbe
Reference:
Advances in Polymer Technology 2004, Cochin University of Science and
Technology, India, 16th-17th January 2004, pp.:
841-846, India
2003
14.
Development of rubber pressure
moulding technique to fabricate fiber reinforced plastic components
Authors: T.K.
Saha, S.K. Behera, S.D. Sharma, P.Kumar and Kamal K. Kar
Reference: Second
ISAMPE national conference on composite and twelfth national seminar on
aerospace structure, Bengalore, 5-6th September 2003, India
2002
13.
Influence of rheological properties
on extrudate swell during processing of styrene butadiene rubber: A
predictive model
Authors:
Kamal K. Kar
and Joshua U. Otaigbe
Reference: Indian
Rubber Conference
Venue: Indian
Institute of Technology Kharagpur, Dates: 12-13th January, 2002,
Publishers:
Allied Publishers Ltd., ISBN 81-7764-246-4, pp.: 173-178, India
12.
A magnetorheological model of
elastomer composites consisting of iron particles embedded in an elastomer
matrix
Authors: P.P.
Singh, S.C. Saraf, S. K. Tulsyan and Kamal K. Kar
Reference: Indian
Rubber Conference Venue: Indian Institute of Technology Kharagpur, Dates:
12-13th January, 2002, Publishers: Allied Publishers Ltd., ISBN
81-7764-246-4, pp.: 194-198, India
2001
11.
A semi-empirical model for
magnetorheological properties of polyethylene composites containing iron
particles
Authors:
P.P.
Singh, Jitendra Kumar and Kamal K. Kar
Reference:
National conference and symposium on solid state chemistry and allied Areas,
Venue: Indian Institute of Technology Kanpur, Dates: 6-8th
December, 2001,
pp. 38, India
10.
Influence of rheological properties
on extrudate swell during processing of polystyrene: A predictive model
Authors:
Kamal K. Kar
and Joshua U. Otaigbe
Reference:
National conference and symposium on solid state chemistry and allied Areas,
Venue: Indian Institute of Technology Kanpur, Dates: 6-8th
December, 2001,
pp.: 39, India
09.
Rheology
of low Tg polyphosphate glass-polymer composites
Authors:
Brad Tischendorf, Joshua Otaigbe,
Kamal K. Kar,
Sunil Adalja, and Meagen Marquardt
Reference:
The
3rd Pacific Rim Conference on Rheology, Vancouver, B.C., Canada
Venue:
Vancouver, B.C., Canada,
Dates:
July
8-13, 2001
Page #
http://www.prcr3.com
08.
Numerical analysis and experimental
studies on the role of rheological properties in effecting die swell of
low-density polyethylene, polypropylene and polystyrene
Authors:
Kamal K. Kar
and Joshua U.Otaigbe
Reference:
73rd Annual Meeting,
The Society of Rheology,
Venue: Bethesda, Maryland, USA, Dates: October 21-25, 2001,
Page # Paper
number PO35,
http://www.rheology.org/ SoR01a/author.asp?AuID=544
2000
07.
Viscous and elastic effects on die
swell during processing of polyethylene, polypropylene and polystyrene: A
predictive model
Authors:
Kamal K. Kar
and Joshua U.Otaigbe
Reference:
7th
International Conference on Composite Engineering, Denver, Colorado, July
2-8, 2000,
ICCCE/7, Ed. David Hui, Page No.: 425-426, USA
06.
An analysis of melt rheology of
liquid crystal polymers (Xydar): Development of a viscosity equation
Authors:
Kamal K. Kar
and Joshua U. Otaigbe
Reference:
AIChE Annual Meeting, American Institute of Chemical Engineers, Los Angeles,
California, November 12-17,
USA
05.
Influence of interfacial tension on
deformation and shape evolution in polyphosphate glasses imbedded in a
polymer matrix
Authors: Kamal
K. Kar, Sunil B. Adalja and Joshua U. Otaigbe
Reference: AIChE
Annual Meeting, American Institute of Chemical Engineers, Los Angeles,
California, November 12-17, 2000, Page no.:
http://www.aiche.org/conferences/
techprogram/paperdetail.asp? PaperID=821&DSN=annual2k
USA
04.
Polyphosphate glass-polymer melt
blends: Creep and Recovery properties of novel organic-inorganic polymer
hybrids
Authors: Kamal
K. Kar, Sunil B. Adalja and Joshua U. Otaigbe
Reference: AIChE
Annual Meeting, American Institute of Chemical Engineers, Los Angeles,
California, November 12-17, 2000, USA
03.
Rheological behavior of
polyetherimide-xydar-neodymium-iron-boron-magnetic alloy over a wide range
of processing condition and constitutive models
Authors:
Kamal K. Kar
and Joshua U. Otaigbe
Reference: 50th
Canadian Chemical Engineering Conference, Montreal, October 15-18, 2000,
CANADA,
http://www.csche2000.ca/
1997
02.
Hysteresis loss of rubber
vulcanizates
Authors:
Kamal K. Kar
and
Anil K.
Bhowmick
Reference:
International Conference on Rubber, IIT-Kharagpur, Taj-bengal, Calcutta,
December 12-14, 1997, Page No.: 104-108, INDIA
1996
01.
Hysteresis loss in filled rubber
vulcanizates and its relationship with heat generation in tyre compounds
Authors: Kamal K.
Kar and Anil K. Bhowmick
Reference: Third
International Rubber Conference, Teheran, October 28-30, 1996, Page No.:
4-15, IRAN
