Digital Ultrasonic Cleaner
Model: LMUC3D
Tank Capacity: 2.5 L
Ultrasonic powder: 10 W
Frequency: 40 kHz
Heating temperature: RT+5°C to ~ 80°C
Time setting: 1-99 min
Purpose: Cleaning the metallurgical samples

Polishing machine
Model: BAINPOL VT 8
Type: single disc cloth polishing 8" disc diameter
Speed: Variable Speed 50 to 1000 rpm
Abrasives: Alumina suspensions, Diamond paste
Polishing: 10 µm to 0.5 µm (Al2O3) & 3 µm to 1 µm (Diamond paste)
Purpose: Final mirror polishing

Creep testing machine
Type: Single Lever Arm Type Creep Testing Machine (ASTM E-139 testing standards)
High Temperature Furnace (up to 1000°C)
Lever Ratio: 20:1
Attachments: With Extensometer Auto-balancing
Creep Compression and Tensile Test Fixtures
Live Monitoring and Data Recording Software (Data logger)
Purpose: Measure the creep rate of engineering materials

Vacuum pump
Model: VE115N
Flow rate: 57 L/min
Ultimate vacuum: 150 micron
Power: 1/4Hp
Purpose: To remove air molecules from a sealed chamber

Horizontal Muffle furnace Type: Low temperature furnace
Temperature range: Up to 900°C
Attachments: Thermocouple with Temperature monitor
Purpose: Heat treatment

Hot plate with Magnetic stirrer
Model: 5MLH
Heating Capacity: 500 W
Stirring Capacity: Up to 5 L
Stirring Speed: Up to 1200 RPM
Maximum Temperature: 150°C
Purpose: heating and Uniform mixing of solutions

Digital temperature control panel with temperature indicator
Category: Infrared Thermometer
Test Range: ~-50°C to ~550°C
Distance to Spot Ratio: 12:1
Accuracy: ±2%
Purpose: Non-contact temperature measurement

Weighing Balance (Electronic Balance)
Make: Weigh Bio
Model: WP-213
Maximum Weighing Capacity: 210 g
Readability (Accuracy): 0.001 g (1 mg)
Purpose: High-precision measurement of solid and powdered samples in the laboratory.