2024:
Sunreet Khanna, A. Chowdhury, K. S. Venkatesh, Ashish Dutta “SCSP-3: A Spectrally Augmented Common Spatial Pattern Approach for Robust Motor Imagery-Based Brain-Computer Interface". IEEE Sensors Journal, Volume 24, Year 2024, Pages 6634-6642 .
C. Zhu, Sushant Maurya, J. Yi, Ashish Dutta “ Brain Computer Interface (BCI)-Enhanced Knee Exoskeleton Control for Assisted Sit-to-Stand Movement".IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM, Year 2024, Pages 278-283.
A. Maruvattu, Ashish Dutta “End Effector Path Tracking by a 13-DOF Mobile Manipulator System Using ANN-Based Model Predictive Control". 13th International Workshop on Robot Motion and Control, RoMoCo 2024 - Proceedings, Year 2024, Pages 223-228.
A. Maruvattu, Ashish Dutta “Gait Generation of 22-DOF Humanoid Robot on Hard and Deformable Terrain with Double Support Phase". 13th International Workshop on Robot Motion and Control, RoMoCo 2024 - Proceedings, Year 2024, pp. 1-6.
2023:
Sushant Maurya, Ashish Dutta “Control of Pneumatic Artificial Muscle Actuated Two Degrees-of-Freedom Robot Using PD-Based Pulse Width Modulation Strategy With Feed-Forward Outer Control Loop ". ASME Journal of Mechanisms and Robotics, Volume 15, no 3, Year 2023 .
Sunil Gora, Shakti S Gupta,, Ashish Dutta “ Energy-Based Footstep Planning of Biped on Uneven Deformable Terrain Using Nonlinear Inverted Pendulum". ASME Journal of Mechanisms and Robotics, Volume 15, no. 5, Year 2023.
Subhi Katiyar, Ashish Dutta “ End-effector path tracking of a 14 DOF Rover Manipulator System in CG-Space framework".Robotica, 2023.
S. Singh, Ashish Dutta “ Gait planning and optimization of an 18 DOF quadruped robot with compliant shanks". Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Year 2023.
Vyankatesh Ashtekar, Ashish Dutta “ Push Recovery Control of a Bipedal Robot Standing on Two Offset Planes in Double Leg Stance". Proceedings of the international conference 'Advances in Robotics 2023', ACM International Conference Proceeding Series, 2023 .
Sunl Gora, Shakti S Gupta, Ashish Dutta “ Gait Generation of 6-DOF Biped Robot on Inclined Deformable Terrain Using Nonlinear Inverted Pendulum". Proceedings of the international conference 'Advances in Robotics 2023', ACM International Conference Proceeding Series, 2023
2022:
Subhi Katiyar, Ashish Dutta “Dynamic path planning over CG-Space of 10DOF Rover with static and randomly moving obstacles using RRT* rewiring". Robotica VOl. 40 (no. 8), pp. 2610-2629, 2022
Jitendra Kumar, Ashish Dutta “ Energy optimal motion planning of a 14-DOF biped robot on 3D terrain using a new speed function incorporating biped dynamics and terrain geometry".Robotica, Volume 40, Year 2022, Pages 250-278, 2022.
Subhi Katiyar, Ashish Dutta “Comparative analysis on path planning of ATR using RRT*, PSO, and modified APF in CG-Space". Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Vol. 236, Issu 10, 2022.
2021:
Jitendra Kumar, Ashish Dutta. “Using bilateral symmetry of the biped robot mechanism for efficient and faster optimal gait learning on uneven terrain”. ”. International Journal of Intelligent Robotics Applications, vol. 5, pp. 429–464 (2021).
Jitendra Kumar, Ashish Dutta “ Learning-Based Motion Planning of a 14 DOF Biped Robot on 3D terrain containing a ditch".International Journal of Humanoid Robotics, 2021.
Jitendra Kumar, Ashish Dutta. “Energy optimal motion planning of a 14-DOF biped robot on 3D terrain using a new speed function incorporating biped dynamics and terrain geometry”. Robotica, vol. 40 , Issue 2, 2022 pp. 250-278.
Subhi Katiyar, Ashish Dutta. “ Dynamic path planning over CG-Space of 10DOF Rover with static and randomly moving obstacles using RRT* rewiring”.Robotica, 2021.
Abhishek Attal, Ashish Dutta. “ Design of a variable stiffness index finger exoskeleton”. Robotica, 2021.
Subhi Katiyar, Ashish Dutta. “Comparative Analysis on Path Planning of ATR using RRT*, PSO and Modified APF in CG-Space”.Proceedings of the IMechE-Part C: Journal of Mechanical Engineering Science, 2021.
Subhi Katiyar, Ashish Dutta. “PSO Based Path Planning and Dynamic Obstacle Avoidance in CG Space of a 10 DOF Rover”.Proceedings of the International Conference – Advances in Robotics AIR-2021, 2021.
Jitendra Kumar, Ashish Dutta. “Optimal Gait Synthesis of a 34-DOF Humanoid Robot on Uneven Ground”.Proceedings of the International Conference – Advances in Robotics AIR-2021, 2021.
Nandani Roma, Ashish Dutta, K. S. Venkatesh. “Modeling and Vision-based Set Point Control of Pneumatic-enabled Robotic Arm”. Proceedings of the International Conference – Advances in Robotics AIR-2021, 2021.
Sunil Gora, Shakti Singh Gupta, Ashish Dutta. “Optimal Gait Generation of an 8-DOF Biped Robot on Deformable Terrain using Floating-base Dynamics”. Proceedings of the International Conference – Advances in Robotics AIR-2021, 2021.
2020:
Anirban Chowdhury, Ashish Dutta, Girijesh Prasad. “Corticomuscular co-activation based hybrid brain-computer interface for motor recovery monitoring ”. IEEE Access, vol.8, 2020, pp. 174542-174557.
Rohit Sonkar, Ashish Dutta “Adding Terrain Height to Improve Model Learning for Path Tracking on Uneven Terrain by a Four Wheel Robot". IEEE Robotics and Automation Letters, 2020.
M. Felix Orlando, Laxmidhar Behera, Ashish Dutta, and Anupam Saxena. “Optimal Design and Redundancy Resolution of a Novel Robotic Two-Fingered Exoskeleton”. IEEE Transactions on Medical Robotics and Bionics, vol. 2, no. 1, 2020, pp. 59-75.
Mahesh Kumar Singh, Ashish Dutta, K. S. Venkatesh. “Multi-Sensor Data Fusion for Accurate Surface Modeling”.Soft Computing, 2020.
doi.org/10.1007/s00500-020-04797-9
Amrut Sekhar Panda, Ravi Prakash, Laxmidhar Behera and Ashish Dutta. “Combined Online and Offline Inverse Dynamics Learning for a Robot Manipulator”. Proceedings of the IEEE International Joint Conference on Neural Networks (IJCNN), Glasgow, UK, 2020.
2019:
Dheeraj Rathee, Anirban Chowdhury, Yogesh Kumar Meena Ashish Dutta, Suzanne McDonough, Girijesh Prasad. “ Brain-Machine Interface Driven Post-stroke Upper-limb Functional Recovery Correlates with Beta-band Mediated Cortical Networks ”. IEEE Transactions on Neural Systems and Rehabilitation Engineering. Vol. 27, no. 5, 2019, pp. 1020-1031.
Anirban Chowdhury, Shyam Sunder Nishad, Yogesh Kumar Meena, Ashish Dutta, and Girijesh Prasad. “Hand-Exoskeleton Assisted Progressive Neurorehabilitation using Impedance Adaptation based Challenge Level Adjustment Method ”. IEEE Transactions on Haptics, 2019. DOI 10.1109/TOH.2018.2878232
Rekha Raja, Ashish Dutta, Bhaskar Dasgupta.“Learning Framework for Inverse Kinematics of a Highly Redundant Mobile Manipulator”. Robotics and Autonomous Systems, 2019.
Hitesh Jangid, Subham Jain, Beteley Teka, Rekha Raja and Ashish Dutta “Kinematics based end-effector path control of a mobile manipulator system on an uneven terrain using a two stage Support Vector Machine”. Robotica, 2019.
Beteley Teka, Ashish Dutta. “Modeling and simulation of cooperative transport of an object by two mobile manipulators on an uneven terrain using KSOM network”. International Journal of Modelling and Simulation. 2019. doi.org/10.1080/02286203.2019.1670034. .
Beteley Teka, Rekha Raja, Ashish Dutta. “Learning based end effector tracking control of a mobile manipulator for performing tasks on an uneven terrain”. International Journal of Intelligent Robotics and Applications, vol. 3, no. 2, 2019, pp. 102-114.
Anirban Chowdhury, Yogesh Kumar Meena, Haider Raza, Ashish Dutta, and Girijesh Prasad. “ An EEG-EMG Correlation-based Brain-Computer Interface for Hand Orthosis Supported Neuro-Rehabilitation”. Journal of Neuroscience methods, vol. 312, 2019, pp. 1-11.
Hubert Cecotti, Yogesh Kumar Meena, Braj Bhushan, Ashish Dutta, Girijesh Prasad. “A Multiscript Gaze-Based Assistive Virtual Keyboard”. Proceedings of the International Conference of the IEEE Engineering in Medicine & Biology Society (IEEE EMBC), Germany, 2019
Anirban Chowdhury, Ashish Dutta, Girijech Prasad. “Can Corticomuscular Coupling be Useful in Designing Hybrid-Brain Robot Interfaces for Hand Functional Recovery ”.Proceedings of the IEEE International Conference on Systems, Man, and Cybernetics, 2019.
Jitendra Kumar, Ashish Dutta “ Motion Planning of a 14 DOF Biped Robot for Crossing an Irregular Shape Ditch using a New Speed Function Incorporating Terrain Features and Biped Dynamics ”. Proceedings of the International Conference Advances in Robotics, India, 2019.
Shubhi Katiyar, Ashish Dutta “Path Planning and Obstacle Avoidance in CG Space of a 10 DOF Rover using RRT* ”.Proceedings of the International Conference Advances in Robotics, India, 2019.
2018:
Anirban Chowdhury, Yogesh Kumar Meena, Haider Raza, Braj Bhushan, Ashwani Kumar Uttam, Nirmal Pandey, Adnan Ariz Hashmi, Alok Bajpai, Ashish Dutta, and Girijesh Prasad. “Active Physical Practice Followed by Mental Practice Using BCI-Driven Hand Exoskeleton: A Pilot Trial for Clinical Effectiveness and usability”. IEEE Journal of Biomedical and Health Informatics, vol. 22. no. 6,2018, pp. 1786-1795.
Yogesh Kumar Meena, Hubert Cecotti, KongFatt Wong-Lin, Ashish Dutta, Girijesh Prasad. “Towards Optimization of Gaze-Controlled Human-Computer Interaction: Application to Hindi Virtual Keyboard for Stroke Patients”. IEEE Transactions on Neural Systems and Rehabilitation Engineering, vol.26, no.4, 2018, 99. 911-922.
Abhishek Sarkar, Ashish Dutta. “ Optimal Trajectory Generation and Design of an 8-DoF Compliant Biped Robot for Walk on Inclined Ground”. Journal of Intelligent and Robotic Systems, 2018. DOI:doi.org/10.1007/s10846-018-0882-9
Gaurav Gupta, Ashish Dutta. “ Trajectory Generation and Step Planning of a 12DOF Biped Robot on Uneven Surface”. Robotica. 2018. doi:10.1017/S0263574718000188
Mahesh Kumar Singh, Ashish Dutta, K.S. Venkatesh. “A view planning method for complete 3D digitization of a scene”. Electronics Letters, 2018.
Dheeraj Rathee, Yogesh Kumar Meena, Anirban Chowdhury, Ashish Dutta, Suzanne McDonough, Girijesh Prasad, “Functional whole brain connectivity using magnetoencephalography to identify the neuro-biomarkers of BCI-robotic driven stroke recovery,” BIOMAG 2018.
Yogesh Kumar Meena, Anirban Chowdhury, Ujjwal Sharma, Hubert Cecotti, Braj Bhushan, Ashish Dutta, Girijesh Prasad. “A hindi virtual keyboard interface with multimodal feedback: A case study with a dyslexic child.”Proceedings of the British Human Computer Interface Conference, Belfast, UK, 2018. .
Anirban Chowdhury, Haider Raza, Yogesh Kumar Meena, Ashish Dutta, Girijesh Prasad. "Online Covariate Shift Detection based Adaptive Brain-Computer Interface to Trigger Hand Exoskeleton Feedback for Neuro-Rehabilitation" IEEE Transactions on Cognitive and Developmental Systems, Vol. 99, 2017. DOI 10.1109/TCDS.2017.2787040
Ved Prakash Choudhary, Vipin Kumar Singh and Ashish Dutta. “Design of an optimal 4-bar mechanism based gravity balanced leg orthosis”. Journal of Intelligent and Robotic Systems, vol. 86, no. 3, 2017, pp. 485-494.
Mahesh Kumar Singh, Ashish Dutta, K.S. Venkatesh. “Design and development of a low cost laser sensor”. The Imaging Science Journal, vol. 65, no. 4, 2017, pp. 203-213.
M. Felix Orlando, Laxmidhar Behera, Ashish Dutta, Anupam Saxena, Tomoya Tamei, Tomohiro Shibata. “On redundancy resolution of the human thumb, middle and index finger in cooperative object translation”. Robotica, vol. 35, no. 10, 2017, pp. 1992-2017.
Mahesh Kumar Singh, Ashish Dutta, K.S. Venkatesh. “Accurate 3D documentation of distinct sites.” Journal of Electronic Imaging, vol. 26, no. 1, 2017.
Anirban Chowdhury, Haider Raza ,Ashish Dutta Girijesh Prasad . “EEG-EMG based Hybrid Brain Computer Interface for Triggering Hand Exoskeleton for Neuro-Rehabilitation”. Proceedings of the Advances in Robotics AIR 2017, India, 2017.
Beteley Hailu, Rekha Raja, Ashish Dutta. “Advanced KSOM based Redundancy Resolution of a Mobile Manipulator System for Motion on an Uneven Terrain”. Proceedings of the Advances in Robotics AIR 2017, India, 2017.
Rekha Raja and Ashish Dutta. “Path Planning in Dynamic Environment for a Rover using A* and Potential Field Method”. Proceedings of the International Conference Advances in Robotics, Hong Kong, 2017.
Rekha Raja, Bhaskar Dasgupta, Ashish Dutta. “Cooperative Motion Planning of Redundant Rover Manipulators on Uneven Terrains”. Proceedings of the International Conference Advances in Robotics, Hong Kong, 2017.
Mahesh Kumar Singh, K. S. Venkatesh, Ashish Dutta. ”Kernal based approach for accurate surface estimation using laser scanner data”. Computers & Electrical Engineering, vol. 56, 2016, pp. 763-772.
Yogesh Kumar Meena, Anirban Chowdhury, Hubert Cecotti, Kong Fatt Wong-Lin, S. S. Nishad, Ashish Dutta, Girijesh Prasad. “EMOHEX: An Eye Tracker based Mobility and Hand Exoskeleton Device for Assisting Disabled People”. Proceedings of the IEEE International Conference on Systems, Man, and Cybernetics, Hungary, 2016.
Anirban Chowdhury, Haider Raza, Ashish Dutta and Girijesh Prasad. “Cortico-Muscular –Coupling and Covariance based Personalised Neuro-Rehabilitation of Stroke Patients.” Proceeding of International Brain-Computer Interface (BCI) Meeting, California,USA, 2016.
Rekha Raja, Ashish Dutta, K.S. Venkatesh. “New potential field method for rough terrain path planning using a Genetic Algorithm for a 6- wheel rover”. Robotics and Autonomous Systems, vol. 72, 2015, pp. 295-306.
Abhishek Sarkar, Ashish Dutta. “8-DOF Biped Robot with Compliant-Link.” Robotics and Autonomous systems, vol. 63, 2015, pp. 57-67.
Anirbam Chaudhury, Haider Raza, Ashish Dutta, Girijesh Prasad, Shyam Sunder Nishad, Anupam Saxena. “A study on cortico muscular coupling in finger motion for exoskeleton assisted neuro rehabilitation”. Proceedings of the IEEE Engineering in Medicine and Biology Conference, Italy, 2015.
Mahesh Kr Singh, K.S. Venkatesh and Ashish Dutta. “A New Method for Calibration of Range Sensor and Terrain Classification”. IEEE International Conference on Image Information Processing (ICIIP), 2015.
Shyam Sunder Nishad, Anupam Saxena and Ashish Dutta. “Design and control of a three finger hand exoskeleton for translation and rotation of a slender object.” Proceedings of the ASME International Design Engineering Technical Conference, Boston, USA, 2015, DETC2015-47058.
Mahesh Kr Singh, K.S. Venkatesh and Ashish Dutta. "Accurate Rough Terrain Modeling from Fused 3D Point Cloud Data”. IEEE India International Conference (INDICON-15), 2015.
Mahesh Kr Singh, K.S. Venkatesh and Ashish Dutta. "A New NBV Method For 3D Modeling of Unknown Objects”. IEEE International Conference on Image Information Processing (ICIIP), 2015.
Raja, Rekha, Arjun Bhasin, and Ashish Dutta. "Non-holonomic mobile manipulator control using hybrid simulated annealing", IEEE WIECON-ECE, Bangladesh, 2015.
Raja, Rekha, Bhaskar Dasgupta, and Ashish Dutta. "Motion planning and redundancy resolution of a rover manipulator", IEEE WIECON-ECE, Bangladesh, 2015
Mahesh Kr Singh, K.S. Venkatesh and Ashish Dutta. "Range Data Fusion for Accurate Surface Generation from Heterogeneous Range Scanners”. 12th International Conference on Informatics in Control, Automation and Robotics (ICINCO-2015), Colmar, France, 2015.
Mahesh Kr Singh, K.S. Venkatesh and Ashish Dutta. “Kernel Based Method for Surface Estimation Using Laser Scanner Data”. 5th IEEE International Conference on Communication and Signal Processing (ICSSP), 2015.
Manavaalan Gunasekaran, Ramprasad Potluri, and Ashish Dutta. "Path Tracking Control of a Moon Rover". Indian Control Conference. Proceedings of IEEE, India. January 2015.
Arjun Bhasin, Ashish Dutta. “Redundancy resolution and control of a non-holonomic mobile manipulator system using kinnet mounted on UAV”. Proceeding of the International Conference - Advances in Robotics - 2015.
Ajahar Khana, Inamuddina, Mohammad Luqmanb, Ashish Dutta. “Kraton based Ionic Polymer Metal Composite (IPMC) Actuator”. Sensors & Actuators: A. Physical, vol. 216, 2014, pp. 295-300.
R. K. Jain, S. Datta, S. Majumder, A. Dutta. “Development of Multi Micro Manipulation System Using IPMC Micro Grippers”. Journal of Intelligent and Robotic Systems, vol. 74, 2014, pp. 547-569.
Shyam Sunder Nishad, Ashish Dutta, Anupam Saxena. “Design and Control of a Three Finger Hand Exoskeleton for Translation of a slender object”. Proceedings of the International Conference on Ubiquitous Robots and Ambient Intelligence, Kuala Lumpur, Malaysia 2014, pp. 179-184.
Mahesh Kumar Singh, K.S. Venkatesh and Ashish Dutta, “Accurate 3D Terrain Modeling by Range Data Fusion from Two Heterogeneous Range Scanners”. INDICON, 2014.
Abhishek Sarkar, N. N. Kishore, Ashish Dutta. “8-DOF biped robot with compliant links”. Proceedings of the International conference on control", automation, robotics and vision, Singapore, 2014, pp. 1195-1200.
Rekha Raja, Ashish Dutta, Bhaskar Dasgupta. “KSOM based learning for cooperative motion of a redundant rover manipulator on an uneven terrain”. Proceedings of the International conference on control, automation, robotics and vision, Singapore, 2014, pp. 1677-1682.
M. Felix Orlando, Ashish Dutta, Anupam Saxena, Laxmidhar Behera, Tomoya Tamei, Tomohiro Shibata. “Manipulability Analysis of Human Thumb, Index and Middle Finger in Cooperative 3D Rotational Movements of a Small Object”, Robotica, vol. 31, 2013, pp. 797-809.
R. K. Jain, S. Majumder and Ashish Dutta. “SCARA Based Peg-in-hole Assembly Using Compliant IPMC Micro Gripper”. Robotics and Autonomous Systems, Vol. 61, 2013, pp. 297-311.
Vijaysingh Shinde, Ashish Dutta and Anupam Saxena. “Experiments on multi-agent capture of a stochastically moving object using modified projective path planning“, Robotica, vol. 31, no. 2, 2013, pp. 267-284.
Ravi Kant Jain, S. M. Majumdar and Ashish Dutta. “Active 4 DOF based RCC wrist using segmented IPMC’s for robotic peg-in-hole assembly”. Proceedings of the SICE Annual conference, Nagoya, Japan, 2013, pp. 2625 – 2632.
Jimson Ngeo, Tomoya Tamei, Tomohiro Shibata, Felix Orlando M., Laxmidhar Behera, Anupam Saxena, Ashish Dutta. “Control of an Optimal Finger Exoskeleton based on Continuous Joint Angle Estimation from EMG signals”. Proceedings of the IEEE International Conference on Engineering in Medicine and Biology, Osaka, Japan 2013.
Raja, Rekha, and Ashish Dutta. "Path Planning Algorithm for a Planetary Rover with Fuzzy Logic Adaptation and a Combination of A* and Potential Field Method.", IEEE Workshop On Computational Intelligence: Theories, Applications and Future Directions, India, pp. 190-194, 2013.
R. K. Jain , S. Majumder and A. Dutta. “Micro assembly by an IPMC based flexible 4-bar mechanism”. Smart Materials and Structures, vol. 21, no. 7, 2012.
R. K. Jain, S. Majumder and A. Dutta. “Multiple path generation by a flexible 4-bar mechanism using ionic polymer metal composite”. Journal of Intelligent Material Systems and Structures, Vol. 23, no. 12, 2012, pp. 1379-1393.
R. K. Jain, S. Datta, S. Majumder, A. Dutta. “Two IPMC fingers based micro gripper for handling”. International Journal of Advanced Robotic Systems, vol. 8, no. 1, 2011, pp. 1-9. Parth Nanadikar, Rahul Shome, Ashish Dutta. “A potential filed based method for autonomous lunar rover navigation in 3D terrain”. 26th International Conference on CAD/CAM and Factories of the Future, Malaysia, 2011, pp.767-776 .
M. F. Orlando, Ashish Dutta, Anupam Saxena, L. Behera, Tomohiro Shibata and Tomoya Tamei. ”Design and development of a three finger hand exoskeleton”, Robotics Society of Japan Annual Conference, Tokyo, Japan, 2011.
Vikalp Sachan, K.S. Venkatesh, Ashish Dutta. “Structured light based navigation on rocky terrain for a six wheel lunar rover”. 26th International Conference on CAD/CAM and Factories of the Future, Malaysia, 2011, pp. 697-705.
Harjinder Singh, Anjali Kulkarni, Ashish Dutta. “Design and experiments of a six wheel lunar rover for motion on uneven terrain”. 26th International Conference on CAD/CAM and Factories of the Future, Malaysia, 2011, pp. 739-746.
Swagat Kumar, Premkumar P., Ashish Dutta, L. Behera. “Visual motor control of a 7DOF redundant manipulator using redundancy preserving learning networks”, Robotica, vol. 28, 2010, pp. 795-810.
Biswanat Panda, Ashish Dutta. “Design of a Partially Compliant Crank Rocker Mechanism Using Ionic Polymer Metal Composite for Path Generation”, Materials & Design, vol. 31, 2010, pp. 2471-2477.
S. Manepalli, Ashish Dutta, Anupam Saxena. “Multi-objective GA based algorithm for 2D form and force closure grasp of prismatic objects”. International Journal of Robotics and Automation, vol. 25, no. 2, 2010, pp. 142-154. M.F. Orlando, H. Akholkar, A. Dutta, A. Saxena and L. Behera. “Optimal design and control of a thumb exoskeleton”. IEEE TENCON, Fukuoka, Japan, 2010.
Shrikant Parakh, Pankaj Wahi and Ashish Dutta. “Velocity kinemtics of a rocker-bogie type planetary rover”. IEEE TENCON, Fukuoka, Japan, 2010, pp. 939-944.
Himanshu Singh, Vipul Arora, Laxmidhar Behera, Ashish Dutta. “Face Feature Tracking with Automatic Initialization and Failure Recovery”. IEEE Conference on Cybernetics and Intelligent Systems, 2010, pp. 96-101.
Himanshu Singh, Vipul Arora, Laxmidhar Behera, Ashish Dutta. ”A System of Systems Approach in Face feature Tracking for Real Time Applications”. IEEE International Conference on System of Systems Engineering, UK, 2010.
M. F. Orlando, H. Akholkar, A. Dutta, A. Saxena and L. Behera. “Optimal design and control of a hand exoskeleton for rehabilitation of stroke patients”. IEEE International Conference on Robotics, Automation and Mechatronics, Singapore, 2010.
Tripures Mishra, Prithwijit Guha, Ashish Dutta and K. S. Venkatesh. “Stochastic Re-grasp Planning for Vision Aided Capture of Deforming and Moving Objects”. Mechatronics, vol. 19, no.4, 2009, pp.510-519.
D. Bandopadhya, A. Dutta, B. Bhattacharya. “Pseudo-rigid body modeling of IPMC for a partially compliant 4-bar mechanism for work volume generation”. Journal of Intelligent Material Systems and Structures, Vol. 20, no. 1, 2009, pp. 51-62. Santosh Pratap Singh, Ashish Dutta and Anupam Saxena. “Design of a biped robot with torsion springs at the joints for reduced energy consumption during walk”. ASME International Design Engineering Technical Conference, San Diego, USA, 2009.
Meenakshi Gupta, T Naveen Kumar, Laximidhar Behera, K S Venkatesh and Ashish Dutta. “Environment Modelling in Mobile Robotics through Takagi-Sugeno Fuzzy Model", Irish Signals and Systems Conference, Ireland, 2009.
Pankaj Sharma, Anupam Saxena, Ashish Dutta. “Optimal arrest and guidance of a moving prismatic object using multi-agents”, Robotica, vol. 26, no.1, 2008, pp. 41-53.
Atsuo Ogawa, Goro Obinata, Kazunori Hase, Ashish Dutta and Miyoshi Nakagawa. “Design of Lower Limb Prosthesis for Controlling Contact Pressure by MR Fluid”. Transactions of the Japan Society of Mechanical Engineers, 2008, vol. 74(746), pp. 2562-2569.
Dibakar Bandopadhya, Bishakh Bhattacharya, Ashish Dutta. “Active vibration control strategy for a single link flexible manipulator using ionic polymer metal composites”, Journal of Intelligent Material Systems and Structures, vol.19, 2008, pp.487-496.
D. Bandopadhya, B. Bhattacharya, A. Dutta. “Characterization of IPMC as passive nad active damper as an alternative novel smart actuator”, Journal of Reinforced plastics and Composites, 2008, doi:10.1177/0731684407084210
Atsuo Ogawa, Goro Obinata, Kazunori Hase, Ashish Dutta, Miyoshi Nakahawa. "Design of Lower Limb Prosthesis with contact pressure function by MR fluid". Proceedings of the IEEE International Conference of Engineering in Medicine and Biology, Aug. 20-24, Canada, 2008, pp. 330-333.
D. Bandopadhya, B. Bhattacharya, A. Dutta. “An Active Vibration Control Strategy for a Flexible Link Using Distributed Ionic Polymer Metal Composites”, Smart Materials and Structures, Vol.16, 2007, pp. 617-625.
M. Shrivastava, A. Dutta, A. Saxena. “Trajectory generation using GA for an 8 DOF biped robot with deformation at the sole of the foot”, Journal of Intelligent and Robotic Systems, vol. 49, 2007, pp. 67-84.
D. Bandopadhya, B. Bhattacharya, A. Dutta. “Modeling of Hybrid Damping Scheme Using Smart Magnetostrictive Composites for Flexible Manipulator", Journal of Reinforced Plastics and Composites, Vol. 26, No. 9, 2007, pp. 861-880.
Swagat Kumar, Amit Shukla, Ashish Dutta, Laxmidhar Behera. “A model-free redundancy resolution technique for visual motor coordination of a 6 DOF robot manipulator”, Proceedings of the IEEE International Symposium on Intelligent Control, Singapore, 2007.
Ogawa, A., Obinata, G., Hase, K., Dutta, A. and Nakayama, A., "Measurement of Contact Force between Inner Socket and Skin of Lower Limb in Below-Knee Prosthesis", Proceedings of Mechanical Engineering Congress Japan, Vol.6, No.07-1, 2007, pp.53-54.
Ogawa, A., Obinata, G., Hase, K., Dutta, A. and Nakayama, A., “Measurement of Contact Force between Socket and Stump of Lower Limb in Below-Knee Prosthesis”, Proceedings of the 22nd Japanese Conference on the Advancement of Assistive and Rehabilitation Technology, 2007, pp.113-114.
A. Dutta and G. Obinata. “Form closure regrasp planning for capture of a slowly moving deforming object”, Proceedings of the IEEE IFAC International conference on Methods and Models in Automation and Robotics, Poland, 2007.
P. Sharma, A. Saxena, A. Dutta. “Obstacle avoidance, arrest and guidance of a prismatic 2D object using multi agents”, Proceedings of the SICE International Conference on Instrumentation, Control and Information Technology, Kagawa, Japan, 2007, pp. 1053-1057.
P. Aggarwal, A. Dutta , B. Bhattacharya. “Cooperation between a 4 DOF robotic hand and a human”, Proceedings of the SICE International Conference on Instrumentation, Control and Information Technology, Kagawa, Japan, 2007, pp. 2354-2359.
P. Kulkarni, D. Goswami, P. Guha and A. Dutta. “Path planning for a statically stable biped robot using PRM and Reinforcement learning”, Journal of Intelligent and Robotic Systems, vol. 47, 2006, pp. 197-214.
S. Garg and A. Dutta. “Grasping and manipulation of deformable objects based on internal force requirements”, International Journal of Advanced Robotic Systems, Vol.3, No.2, 2006, pp. 107-114.
D. Bandopadhya , Ashish Dutta and B. Bhattacharya. "Active vibration control using terfenol-D with H-infinity filter". International Journal of Engineering Modeling, Vol.19, no. 1-4, 2006, pp. 33-42.
Pankaj Sharma, Anupam Saxena, Ashish Dutta , “Multi agent form closure capture of a generic 2D polygonal object based on projective path planning,” Proceedings of the ASME 2006 International Design Engineering Technical Conferences, Philadelphia, USA, Sept., 2006, pp.1-8.
D. Bandopadhya, A. Dutta, B. Bhattacharya, “Active vibration suppression for a flexible link using IPMC”, Proceedings of the IEEE International Conference on Robotics, Automation and Mechatronics, Bangkok, 2006, pp. 28-33.
Pankaj Sharma, Ashish Dutta, Anupam Saxena, “Determination of Optimal Contact Points for Constraining a Prismatic Object by a Group of Mobile Robots”, Proceedings of the IEEE International Conference on Robotics, Automation and Mechatronics, Bangkok, 2006, pp. 86-90.
T. Mishra, P. Guha, A. Dutta, and K.S. Venkatesh. “Efficient continuous re-grasp planning for moving and deforming planar objects”, Proceedings of the IEEE International Conference on Robotics and Automation, ICRA, 2006, pp. 2472 – 2477.
D. Goswami, L. Behera and Ashish Dutta, “Simulation and Experiments on a Robot Arm”, Proceedings of the International Conference on Computational Intelligence, Robotics and Autonomous Systems (CIRAS), Singapore, 2005.
Dip Goswami, A. Dutta, L. Behera, “Dynamic Walking of Eight DOF Biped using neural Net Controller”, Proceeding of the SICE International Conference on Instrumentation, Control and Information Technology, Okayama, Japan, 2005, pp. 1885-1890.
Ashish Dutta, Pankaj Mukhija , “Grasping and Manipulation of Deformable Objects by a Three Finger Hand”, Proceeding of the SICE International Conference on Instrumentation, Control and Information Technology, Okayama, Japan, 2005, pp. 840-845.
S. Diwedi, A. Dutta, A. Mukerjee, P. Kulkarni “Development of a Speech Recognition System for Control of a Biped Robot”, Proceedings of the IEEE ROMAN, Kurashiki, Japan, 2004, pp. 601-605.
M. Maheshwari, P.Guha, A. Dutta, “Development of an advanced Teleoperator using an exoskeleton, FES, and Vision System”, National Conference on Advanced Manufacturing and Robotics, 2004, India, pp. 162-167.
P. Kulkarni, A. Dutta, A. Mukerjee , “Development of an Intelligent Statically Stable Humanoid Robot”, National Conference on Advanced Manufacturing and Robotics, 2004, India, pp. 52-57.
G. Obinata and Ashish Dutta. "A two-finger gripper for robot human cooperation". Life Support, Vol.15, no.2, 2003, pp. 5-12.
Ashish Dutta and G. Obinata. "Impedance Control of a Robotic Gripper for Cooperation with Humans". Control Engineering Practice, vol.10, no. 4, 2002, pp. 379 – 389.
Ashish Dutta and G. Obinata. “The way we grasp an object affects the static grasping forces". Japanese Journal of Ergonomics, vol. 38, no.3, 2002, pp. 168-170.
Ashish Dutta and Goro Obinata. "The static grasping forces depend on the size of the grasped object". Japanese Journal of Ergonomics, vol. 38, no. 3, 2002, pp. 171-174.
A. Dutta and G. Obinata. “Variation of Initial Grasping Force with Length of an Object". Proceedings of the IEEE International Workshop on Robot and Human Interactive Communication, Osaka, Japan, 2000, pp. 224-228
Ashish Dutta, G.R. Muzumdar, V.T. Shirwalkar, K. Jayarajan, D. Venkatesh and M.S. Ramakumar. "Development of a Dextrous Gripper for Nuclear Applications". Proceedings of the IEEE International Conference on Robotics and Automation, New Mexico, USA, 1997, pp. 1536-1540.
K. Jayarajan, A. Dutta, D.C. Kar, R.Sahu, D.G.Zende, T.K.Bhaumik, D.Venkatesh and M.S.Ramakumar. "Design of a Telemanipulator for Radioactive Waste Management". Proceedings of the International Symposium in Intelligent Robotic Systems, Bangalore, India, 1998, pp. 213-218.
Ashish Dutta, G.R.Muzumdar, V.T.Shirwalkar, K.Jayarajan, D.Venkatesh and M.S.Ramakumar. "Force Control and Slip Detection using a Dextrous Gripper". Proceedings of the International Symposium on Intelligent Robotic Systems, Bangalore, India, 1998, pp. 55-59.
K. Jayarajan, D.G.Zende, T.K.Bhaumik, Ashish Dutta, Nirupam Das, D.Venkatesh and M.S.Ramakumar. "On the Design of a Telemanipulator for the Replacement of PHWR Coolant Channels" , Proceedings of the International Symposium on Intelligent Robotic Systems, Bangalore, India, 1995, pp. 410-414.
|
