Projects
Sponsored Projects Details


Funding


  • Bulk metallic glass coating by mechanical milling/alloying: Institute support, completed, 2008-2010.
  • Bulk metallic glass coating: Department of Science and Technology, India Completed 2009-2012. (Co-PI: Prof. Gouthama)
  • Development of Corrosion and Wear Resistant Ni and Al-based Metallic Glass and Nanocrystalline Coatings: Naval Research Board, India sanctioned: Completed 2009-2013. (Co-PI: Prof. R. Balasubramaniam)
  • Role of particle size of yittria stabilized zirconia on the wear resistance of the plasma sprayed aluminium oxide coating, Space Technology Cell, Completed, 2012-2014. (Co-PI) (PI: Prof. K. Balani)
  • Rutag sub project (Solar power evaporative cooler for vegetable storage) 2015-16. Rutag India, IIT Kanpur. (PI) (Co-PI: Prof. S. Sangal, Prof. H.C. Verma, Prof. K. Kant)
  • Rutal sub project (Development of a thermal solar dryer for food processing, , 2015-16. Rutag India, IIT Kanpur. (Co-PI) (PI: Prof. S. Sangal)
  • Surface grooving of Cu/Ni based alloys using Jet Electrolytic dissolution for enhancement of heat transfer rate, Space Technology Cell, (Co-PI: Prof. J. Ramkumar) (2016-2018)
  • Layered steel for structural applications, DIC, MHRD, (Co-PI: Prof. S. Sangal and Prof. S. Shekhar) (2016-2018)
  • Surface texturing of bio-materials, ISRO Technology Cell, (as a Co-PI) (2016-2018)
  • High strength, wear and corrosion resistant steel for high speed rail and elastic clip, Imprint, (PI). (2017-continuing)
  • Development of controlled expansion (CE) Al-Si alloys by packed rolling, ISRO, (PI) 2017-2019)
  • In situ formed metal oxide coated inert anode for impressed current cathodic protection of steel structures, SERB, DST, (PI) 2021-2024
  • Synthesis Of Pure Lab6 Via Solid State Metallothermic Reduction (Ca/Mg/Al+B2o3+La2o3/Lacl3) And Subsequent Making Of Hallow Tube Of Lab6, ISRO, (PI) 2020-2022
  • Pitting in 120 mm Barrel cannon,Ordinace factory, Kanpur- 1st phase Completed, 2014-15.
  • Development of high strength highly ductile low carbon low alloy multiphase steels for structural applications, TATA Steel, Completed 2016.
  • Making of cake from lead grids without melting, Verdeen Chemicals Pvt. Ltd., Hapur, (Co-PI) (PI: Prof. S. Shekhar)
  • Thermodynamics of glass formation, TATA Steels, Jamshedpur. (sole PI)
  • Pitting in 120 mm Barrel cannon, Ordnance factory, Kanpur - 2nd phase 2017.
  • Synthesis of Fe-based metallic glass from HPPI (Original and selected modified compositions) through rapid solidification, TATA Steel,
  • Characterization of scale formed on hot rolled Si-containing steel sheets and optimization of pickling condition for proper cleaning, TATA Steel,
  • Exploring the feasibility of using high phosphorus cast iron as sacrificial material, TATA Steel,
  • Lecture series on Fundamentals of Corrosion and its Application, TATA Steel,
  • Effect of ultrasonic cleaning on the metal surface of 105/37 mm cannon, Ordnance factory, Bareily, India,
  • Investigation on the hydrogen embrittlement susceptibility in NiP coated X70 steel by SSRT, TATA Steel.
  • Investigation on the hydrogen embrittlement susceptibility in NiP coated X70 steel by SSRT, TATA Steel
  • Synthesis of Fe-based glass coatings from HPPi (selected modificeed compositions (ii and iii) via HVOF and APS methods. Tata Steel
  • Long-Term Corrosion Study Of The Foundation System And Providing Feasible Options, Adani group Gujarat.
  • Gold coloring standardization, Titan, India