Non-Equilibrium Processing
& Corrosion Laboratory

Publications
List of publications in International Journals


Some Selected Publications (as of 10th June 2021)

- 2021

  1. Nisheeth Kr. Prasad, A.S. Pathak, S. Kundu, K. Mondal, Novel hybrid sacrificial anodes based on high phosphorus pig iron and Zn, Corrosion Sci. (in press)
  2. Prasanna Kumar Behera, Sudhir Misra and K. Mondal (2021), On the corrosion of strained plain rebar in chloride-contaminated mortar and novel approach to estimate the corrosion amount from rust characterization, J. Mater Civil Engg. (in press).
  3. Pavan Bijalwan, Charu Singh, Anil Kumar, Kuntal Sarkar, Nitu Rani, Tapas Laha, Atanu Banerjee, and K. Mondal (2021), Corrosion behaviour of Plasma sprayed Fe based metallic glass (Fe73Cr2Si11B11C3 (at%) coatings in 3.5% NaCl solution, J. Non-Cryst. Sol. Vol 567, P 120913.
  4. H. S. Maharana, K. Mondal (2021), Manifestation of Hall–Petch breakdown in nanocrystalline electrodeposited Ni-MoS2 coating and its structure dependent wear resistance behavior, Surf. Coat. Tech., vol 410, P 126950.
  5. Arun Rajput, J. Ramkumar and K. Mondal (2021) Effect of pearlitic morphology with varying fineness on the cavitation erosion behavior of eutectoid rail steel, Ultrasonics Sonochemistry, vol 71, p 105399.
  6. Neetu, Prvan Kumar Katiyar, S. Sangal and K. Mondal (2021), Effect of various phase fraction of bainite, intercritical ferrite, retained austenite and pearlite on the corrosion behavior of multiphase steels, Corros. Sci. vol 178, P 109043.

-2020

  1. Santigopal Samanta, K. Mondal, Monojit Dutta, Shiv Brat Singh (2020), Electroless NiP coatings over API X70 steel: effect of composition on the H-permeation and corrosion resistance, Surf. Coat. Tech. vol. 403, P 126356.
  2. Prasanna Kumar Behera, Prvan Kumar Katiyar, Sudhir Misra and K. Mondal (2020), Effect of pre-induced plastic strains on the corrosion behavior of reinforcing bar in 3.5% NaCl solution, Metall. Met. Trans. A vol 52, pp 605-626.
  3. Arti Sahu, Kallol Mondal, Raj Ganesh Pala (2020), Activated porous highly enriched Pt and Pd electrocatalysts from dealloyed noncrystalline alloys for enhanced hydrogen evolution, ChemElectroChem, vol 7, pp 4404-4416.
  4. T. D. Naidu, Prabhat K. Rai, K. Sarkar, P. Bijalwan, A. Pathak, M. Dutta, A. Banerjee, K. Mondal (2020), Comparative wear behavior of semi-crystalline HVOF and plasma sprayed phosphorous-rich pig iron coatings, J. Thermal Spray Tech., vol 29, pp 2048-2064.
  5. Santigopal Samanta, Charu Singh, Atanu Banerjee, K. Mondal, Monojit Dutta, Shiv Brat Singh (2020), Development of amorphous Ni-P coating over API X70 steel for hydrogen barrier application, Surf Coat. Tech. vol 403, 126356.
  6. Santigopal Samanta, Puja Kumari, K. Mondal, Monojit Dutta, Shiv Brat Singh (2020), An alternative and comprehensive approach to estimate trapped hydrogen in steels using electrochemical permeation tests, Inter. J. Hydrog. Energ., vol 45, 26666-26687.
  7. Dhananjay Dubey, Kondababu Kadali, Subha S. Panda, Ashwani Kumar, Jayant Jain, K. Mondal, Sudhanshu S. Singh (2020), Comparative Study on the Stress Corrosion Cracking Susceptibility of AZ80 and AZ31 Magnesium Alloys, Mater. Sci. Eng. A, vol 792, 139793.
  8. A.Varshney, S.Sangal, A. K. Pramanick, K. Mondal (2020), On the extent of transformation of austenite to bainitic ferrite and carbide during austempering of high Si steel for prolonged duration and its effect on mechanical properties, Mater. Sci. Eng. A vol 793, 139764.
  9. B. Bhushan, Kousar Jahan, Prvan Kumar Katiyar, B.S. Murty, K. Mondal (2020), Evolution of ZnO flowerets from dealloying of Cu-Zn alloy powder, Adv. Powder. Tech., vol 31, 3093-3101.
  10. Eshan Saraswat, H.S. Maharana, S.V.S. Narayana Murty, S. Shekhar, Kamal. K. Kar, J. Ramkumar, K. Mondal (2020), Fabrication of Al-Si controlled expansion alloys by unique combination of pressureless sintering and hot forging, Adv. Powder. Tech. vol 31, 2820-2832.
  11. Avisor Bhattacharya, Kallol Mondal, C.S. Upadhyay, Sandeep Sangal (2020), A phase-field study on the evolution of Widmanstatten-ferrite plates under mixed-mode of Transformation, Comput. Mater. Sci., vol 180, 109718.
  12. Prabhat K. Rai, B. Satapathy, K. Sarkar, P. Bijalwan, M. Dutta, A. Banerjee and K. Mondal (2020), Experimental validation of glass forming ability of melt spun ribbons of pig iron and its derivative compositions and their corrosion behaviour, J. Non-Cryst Sol. Vol 532, 119883.
  13. H. S. Maharana, S.V.S. Narayana Murty, J. Ramkumar, K. Mondal (2020), Continuous and ordered surface microtexturing on Cu and Ni-based alloys by novel electrochemical dissolution, J. Alloys and Compound, vol 817, 153263
  14. B. Bhuvaneshwari, S. Vivekananthan, G. Sathiyan, G. S. Palani, Nagesh R. Iyer, Prabhat K. Rai, K. Mondal and Raju Kumar Gupta (2020), Doping Engineering of V-TiO2 for Its Use as Corrosion Inhibitor, J. Alloys and Compounds, vol 816, 152545.

-2019

  1. H. S. Maharana, A. Basu and K. Mondal (2019), Effect of CTAB on the architecture and hydrophobicity of electrodeposited Cu-ZrO2 nano-cone arrays, Surf. Coat. Tech., vol 375, 323-333.
  2. Prvan Kumar Katiyar, Prasanna Kumar Behera, Sudhir Misra and K. Mondal (2019), Effect of microstructures on the corrosion behavior of reinforcing bars (rebar) embedded in concrete, Metals and Materials International, vol 25, 1209-1226.
  3. H. S. Maharana, Ravi Kumar, S.V.S. Narayana Murty, J. Ramkumar, K. Mondal (2019), Surface micro-texturing of dual phase steel and copper by combining laser machining and electrochemical dissolution, J. Mater. Proc. Tech., vol 273, 116260.
  4. B. Bhushan, Prvan Kumar Katiyar, B.S. Murty and K. Mondal (2019), Synthesis of Hydrophobic Ni-VN Alloy Powder by Ball Milling, Adv. Powder Tech., vol 30, 1600-1610.
  5. Kuntal Sarkar, P.K. Rai, Prvan Katiyar, Biswajeet Satapathy, Abhishek Subhash Pathak, Monojit Dutta, Atanu Banerjee, K. Mondal (2019), Composite (glass + crystalline) coatings from blast furnace pig iron by high velocity oxy-fuel (HVOF) process and their electrochemical behavior, Surf. Coat. Tech. vol 345, 72-83.
  6. Prvan Kumar Katiyar, Sudhir Misra and K. Mondal (2019), Comparative corrosion behavior of five microstructures (pearlite, bainite, spheroidized, martensite and tempered martensite) made from a high carbon steel, Metall. Mater. Trans. A, vol 50A, 1489-1501.
  7. H. S. Maharana, Prvan Kumar Katiyar and K. Mondal (2019), Structure dependent super-hydrophobic and corrosion resistant behavior of electrodeposited Ni-MoSe2-MWCNT coating, Appl. Surf. Sci., vol 478, 26-37.
  8. Prabhat K. Rai, S. Shekhar, K. Yagi, K. Ameyama and K. Mondal (2019), Fretting wear mechanism for harmonic, non-harmonic and conventional 316L stainless steels, Wear, vol 424-425, 23-32.
  9. Sandeep Sahu, Nitin Kumar Sharma, Sanjeev Kumar Patel, K. Mondal and S. Shekhar (2019), The effect of grain boundary structure on sensitization behavior in a Nickel-based superalloy, J. Mater. Sci., vol 54, 1797-1818.

-2018

  1. B. Bhushan, B.S. Murty and K. Mondal (2018), A new approach for synthesis of ZnO nanorod flowerets  and subsequent pure free-standing ZnO nanorods, Adv. Powder Tech., vol 30, 30-41.
  2. Asraful Haque, S. Shekhar, S.V.S Narayana Murty, J. Ramkumar, K. Kar and K. Mondal (2018), Fabrication of controlled expansion Al-Si composites by pressureless and spark plasma sintering, Adv. Powder Tech. vol 29, 3427-3439.
  1. P.K. Rai, S. Shekhar and K. Mondal (2018), Effects of grain size gradients on the fretting wear of a specially-processed low carbon steel against AISI E52100 bearing steel, Wear, vol 412-413, 1-13.
  2. H. S. Maharana, A. Basu and K. Mondal (2018), Structural and tribological correlation of electrodeposited solid lubricating Ni-WSe2 composite coating, Surf. Coat. Tech., vol 349, pp 328-339.
  3. Nisheeth Kr. Prasad, A. S. Pathak, S. Kundu and K. Mondal (2018), Possibility of high phosphorus pig iron as sacrificial anode, J. Mater. Eng. Perform., vol 27, 3335-3349.
  4. B. Bhushan, B.S. Murty and K. Mondal (2018), Dealloying kinetics and mechanism of porosity evolution in mechanically alloyed Ag25Zn75 powder particles, Corrosion Science, vol 139, pp 155-162.
  5. P.K. Rai, S. Shekhar and K.Mondal (2018), Development of gradient microstructure in mild steel and grain size dependence of its electrochemical response, Corrosion Science, vol 138, 85-95.
  1. H. S. Maharana, S. Jena, A. Basu and K. Mondal (2018), High Temperature Oxidation Resistance of Electrodeposited Reduced Graphene Oxide (RGO) Reinforced Copper Coating, Surf. Coat. Tech., vol 345, 140-151.
  2. N. Mahata, A. Banerjee, P.K. Rai, P. Bijalwan, A.S. Pathak, S. Kundu, M. Dutta, and K. Mondal (2018), Glassy blast furnace pig iron and design of other glassy compositions using thermodynamic calculations, J. Non-Cryst. Solids, vol 484, 95-104.
  3. Rama Satya Sandilya V., S. Shekhar, S. Sangal and K. Mondal (2018), A novel method for fabricating multi-layered steels, J. Mater. Process. Tech., vol 254, 38-51.

-2017

  1. A. Varshney, S.Sangal, Gouthama, A.K. Pramanik, K.Mondal (2017), Microstructural evidence of nano-carbides in medium carbon high silicon multiphase steels, Mater. Sci. Engg. A., vol 708, 237-247.
  2. Nilanjan Mahata, A. Banerjee, P. Bijalwan, P.K. Rai, S. Sangal and K. Mondal, (2017). Electrochemical behavior of HVOF sprayed amorphous and nanocrystalline Fe-based Fe73.13Si11.12B10.79Cr2.24C2.72 composite coatings, J. Mater. Eng. Perform., vol 26, 5538-5552.
  3. B. Bhushan, B.S. Murty and K. Mondal (2017), A two-step method for synthesis of micron sized nanoporous  silver powder and ZnO nanoparticles, Adv. Powder Tech., vol 28, 2532-2541.
  4. S. Choudhary, V. Nanda, S. Shekhar, A. Garg and K. Mondal (2017), Effect of microstructural anisotropy on the electrochemical behavior of rolled mild steel,  J. Mater. Eng. Perform., vol 26, 185-194.
  5. A. Varshney, S. Sangal and K. Mondal (2017), Exceptional Work Hardening behavior of medium carbon high silicon low alloy steels, Metall. Mater. Trans. A, vol 48, 589-593.

-2016

  1. P.K. Rai, S. Shekhar, M. Nakatani, S. Vajpai, K. Ameyama and M. Ota (2016), Effect of harmonic microstructure on the corrosion behavior of SUS304L austenitic stainless steel, Metall Mater Trans A, vol 47, 6259-6269.
  2. Ravi Johan, Nitin K. Sharma, K. Mondal, Shashank Shekhar (2017), Low temperature cross-rolling to modify grain boundary character distribution and its effect on sensitization of SS 304, J. Mater. Proc. Tech., vol 240, 324-331.
  3. V. Venkatesh, Gouthama and K.Mondal (2017), Effect of cast temperature, size and annealing condition on the serrated flow during nano-indentation of Zr-based bulk metallic glasses, J. Alloys Compound., vol 692, 745-757.
  4. Pratik Murkute, J. Ramkumar, S. Choudhary and K. Mondal (2016), Effect of alternate corrosion and wear on the overall degradation of a dual phase and a mild steel, Wear, vol 368-369, 368-378.
  5. B.P. Kumar, A.P.Moon, K. Mondal, S. Misra (2016): Estimating critical corrosion for initiation of longitudinal cracks in RC structures considering phases and composition of corrosion products, ASCE's J. Mater. Civil Eng. 04016158; PP 1-12.
  6. S. Sharma, S. Sangal and K.Mondal (2016), Wear Behavior of Bainitic Rail and Wheel Steels, Mater. Sci. Tech., vol 32, 266-274.
  7. A.K. Shukla, S.V.S. Narayana Murty, S.C. Sharma and K.Mondal (2016), The serrated flow and recrystallization in dispersion hardened Cu-Cr-Nb alloy during hot deformation, Mater. Sci. Eng. A, vol 673 135-140.
  8. S. Choudhary, A. Garg and K. Mondal (2016), Relation between open circuit potential and polarization resistance with rust and corrosion monitoring of mild steel, J. Mater. Eng. Perform., vol 25, 2969-2976.
  9. S. Khara, S. Chaudhury, S. Sangal and K. Mondal (2016): Corrosion resistant Cr-coating on mild steel by powder roll bonding, Surf. Coat. Tech., vol 296, 203-210.
  10. A. Varshney, S. Sangal, S. Kundu and K.Mondal (2016), Superior work hardening behavior of moderately high carbon low alloy super strong and ductile multiphase steels with dispersed retained austenite, Mater. Des., vol 99, 439-448.
  11. C. Chattapadhyay, K.S.N. Satish Idury, Jatin Bhatt, K. Mondal and B.S. Murty (2016), Critical evaluation of glass forming ability criteria, Mater. Sci. Tech., vol 32, 380-400.
  12. A. Varshney, S. Sangal, S. Kundu and K.Mondal (2016), Super strong and highly ductile low alloy multiphase steels consisting of bainite, ferrite and retained austenite, Mater. Des., vol 95, 75-88.

-2015

  1. S. Monia, A.Varshney, Gouthama, S. Sangal, S. Kundu, S. Samanta and K. Mondal (2015), Development of highly-ductile Spheroidized Steel from High C (0.61 wt. % C) Low Alloy Steel, J. Mater. Eng. Perform., vol 24, 4517-4542.
  2. K. Mondal and B.S.Murty (2015), Factors influencing oxidation Behavior of Metallic Glasses, IIM Transactions, vol 68, 1151-1154.
  3. A.K. Shukla, S.V.S. Narayana Murty, S.C. Sharma and K.Mondal (2015): Constitutive modelling of hot deformation behavior of vacuum hot pressed Cu-8Cr-4Nb alloy, Mater. Des, vol 75, 57-64.
  4. A.P. Moon, S. Sangal, S. Layek, S. Giribaskar and K.Mondal (2015), Corrosion behavior of high strength bainitic rail steels, Metall. Mater. Trans. A, vol 46, 1500-1518.
  5. A. Siebert-Timmer, K. Mondal and L. Bichler (2014), Degradation of SPS fabricated YSZ and CeO2-YSZ ceramics in supercritical water, Int. J. Appl. Ceram. Tech. Page 1-9.
  6. S. Sharma, S. Sangal and K.Mondal (2014), Wear behavior of newly developed bainitic wheel steels, J. Mater. Eng. Perform., vol 24, 999-1010.
  7. M. Prakash, S. Shekhar, A.P. Moon and K. Mondal (2015), Effect of machining configuration on the corrosion behavior of mild steel, J. Mater. Proc. Tech., vol 219, 70-83.
  8. S. Patra, Gouthama and K.Mondal (2015), Densification behavior of mechanically milled Cu-8 at% Cr alloy and its mechanical and electrical properties, Progress in Natural Science: Materials International, vol 24, 608-622.

-2014

  1. C. Chattopadhyay, S. Sangal and K. Mondal (2014): Simulated isothermal crystallization kinetics from non-isothermal experimental data. IIM Trans., vol 67 (2014) 945-958.
  2. K.D. Robles Arellano, L.  Bichler, K. Mondal and R. Fong, (2014): Compressive creep behavior of spar plasma sintered 8 mol% yittria stabilized zirconia. J Mater Eng Perform., vol 23, 3680-3684.
  3. M. Mandal, S. Sangal and K. Mondal (2014): Nanoporous Ag template from partially sintered Ag-Zn compact by dealloying. Bull. Mater. Sci., vol 37, 1353-1367.
  4. S. Sharma, S. Sangal and K.Mondal (2014), Influence of subsurface structure on the linear reciprocating sliding wear behavior of steels with different microstructures, Metall. Mater. Trans. A, vol 45, 6088-6102.
  5. S. Sharma, S. Sangal and K.Mondal, Reciprocating sliding wear behavior of newly developed bainitic steels, (2014): Metall. Mater. Trans. A., vol 45, 5451-5468.
  6. M. Mandal, D. Singh, Gouthama, B.S. Murty, S. Sangal and K. Mondal (2014): Porous copper template from partially spark plasma sintered Cu-Zn aggregate via dezincification. Bull. Mater. Sci., vol 37, 743-752.
  7. K.D. Robles Arellano, L. Bichler, K. Akkiraju, R. Fong and K. Mondal, (2014) Fabrication of novel (5, 10, 15 mol%) CeO2 + YSZ ceramic composites by spark plasma sintering. Canadian Metallurgical Weekly, vol 53, 169-175.
  8. A.K. Shukla, S.V.S. Narayana Murty, S.C. Sharma and K.Mondal (2014): Aging behavior and microstructural stability of a Cu-8Cr-4Nb alloy. J. Alloys Compounds, vol 590, 514-525.
  9. K.D. Robles Arellano, L. Bichler and K. Mondal (2014): Compressive Creep Behavior of Spark Plasma Sintered La2O3-YSZ Composite. Ceramics International, vol 40, 4231-4235.
  10. M. Mandal, A.P. Moon, G. Deo, C. Mendis, K. Mondal (2014): Corrosion behavior of Mg-2.4Zn alloy micro-alloyed with Ag and Ca. Corrosion Science, vol 78, 172-182.
  11. K.D. Robles Arellano, L. Bichler, K. Akkiraju, R. Fong and K. Mondal (2014): Densification behavior of Spark Plasma Sintered La2O3-YSZ Ceramic Composites. Ceramics International, vol 40, 715-722.

-2013

  1. A.K. Shukla, S.V.S. Narayana Murty, R. Suresh Kumar and K. Mondal (2013): Effect of powder milling on mechanical properties of hot-pressed and hot-rolled Cu-Cr-Nb alloy. J. Alloys Compounds, vol 580, 427-434.
  2. A.K. Shukla, Niraj Nayan, S.V.S. Narayana Murty, K. Mondal, S.C. Sharma, Koshy M. George and Srinivasa Rao Bakshi (2013): Processing Copper-Carbon Nanotube Composite Powders by High Energy Milling, Mater. Characterization, vol 84, 58-66.
  3. A.K. Shukla, S.V.S. Narayana Murty, R. Suresh Kumar and K. Mondal (2013): Spark plasma sintering of dispersion hardened Cu-Cr-Nb alloy powders. J Alloys Compounds, vol 577, 70-78.
  4. A.K. Shukla, S.V.S. Narayana Murty, R. Suresh Kumar, K. Mondal (2013): Enhancement of high temperature ductility of hot-pressed Cu-Cr-Nb alloy by hot rolling. Mater Sci Eng A, vol 577, 36-42.
  5. S. Sharma, S. Sangal and K. Mondal (2013): On the optical microscopic method for the determination of ball-on-flat surface linearly reciprocating sliding wear volume. Wear, vol 300, 82-89.
  6. A.P. Moon, S. Sangal and K. Mondal (2013): Corrosion Behaviour of Newly Developed Railway Axle Steels. IIM Trans., vol 66(1), 33–41.
  7. A.K. Shukla, M.G. Samuel, R. Suresh Kumar, S.V.S. Narayana Murty and K.  Mondal (2013): Effect of powder oxidation on densification and properties of vacuum hot pressed Cu-Cr-Nb alloy. Mater Sci Eng A, vol 561, 452–459.
  8. A.K. Shukla, S.V.S. Narayana Murty, R. Suresh Kumar and K. Mondal (2013): Effect of hot rolling on the enhancement of mechanical properties of low density Cu-Cr-Nb sintered alloy. Mater. Design,vol 43, 125-133.

-2012

  1. A. Misra, S. Sharma, S. Sangal, A. Upadhyaya and K. Mondal (2012): Critical isothermal temperature and optimum  mechanical behavior of high Si-containing bainitic steels. Mater. Sci. Eng. A, vol 558, 725–729.
  2. A. Barman, C. Chattopadhayay, S. Sangal and K. Mondal (2012): Comparative studies of different methods for determining crystallization kinetics of metallic glass. IIM Trans., vol 65(6), 565–570.
  3. C. Chattopadhyay, S. Sangal, K. Mondal and A. Garg (2012): Improved wear resistance of medium carbon microalloyed bainitic steels. Wear, vol 289, 168–179.
  4. A.K. Shukla, S.V.S. Narayana Murty, R. Suresh Kumar and K. Mondal (2012): Densification behavior and mechanical properties of Cu-Cr-Nb alloy powders. Mater. Sci. Eng. A, vol 551, 241-248.
  5. A.K. Shukla, Nayan Niraj, S.V.S. Narayana, Murty, S.C. Sharma, K. Mondal and P.P.  Sinha (2012): On the Possibility of Occurrence of Anisotropy in Processing of Cu-CNT Composites by Powder Metallurgical Techniques. Mater. Sci. Forum, vol 710, 285-290.

-2011

  1. G. Gupta, M. Kumar, C. Chattopadhyay and K. Mondal (2011): Corrosion and oxidation behavior of Zr58Cu22Fe4Co4Al12 metallic glass. IIM Trans., vol 64, 401-408.
  2. S. Sharma, S. Sangal and K. Mondal (2011): Development of new high strength carbide free bainitic steels. Metallurg. Mater. Trans. A, vol 42, 3921-3933.

-2010

  1. Y. Rawat, C. Gupta and K. Mondal (2010): On the estimation of the solid liquid interfacial energy of glassy alloys as a function of temperature and structure. IIM Trans., vol 63, 787-791.
  2. C. Chattopadhyay, S. Sangal and K. Mondal (2010): A relook at the preferred growth direction of solid-liquid interface during solidification of pure metals. Acta Mater., vol 58, 5342-5353.
  3. S. Mula, K. Mondal, S. Ghosh and S.K. Pabi (2010): Structure and mechanical properties of Al–Ni–Ti amorphous powder consolidated by pressure-less, pressure-assisted and spark plasma sintering. Mater. Sci. Eng. A, vol 527, 3757-3763.

-2009

  1. K. Mondal and K. Hono (2009): Constrained and unconstrained room temperature plasticity of metallic glass. IIM Trans., vol 62, 403-407.
  2. A.K. Pradhan, S.P. Gupta and K. Mondal (2009): Effect of Zn concentration on diffusion induced grain boundary migration in Cu-Zn system. IIM Transactions, vol 62, 233-239.
  3. G. Gupta, K. Mondal and R. Balasubramaniam (2009): In situ nanocrystalline Fe–Si coating by mechanical alloying. J. Alloys Compounds, vol 482, 118-122.
  4. K. Mondal, A. Kumar, G. Gupta and B.S. Murty (2009): Temperature and structure dependency of solid-liquid interfacial energy. Acta Mater., vol 57, 3422-3430.
  5. K. Mondal and K. Hono (2009): Geometry constrained plasticity of bulk metallic glass. Mater. Trans. (JIM), vol 50. 152-157.

-2008

  1. K. Mondal, T. Ohkubo, T. Toyama, Y. Nagai, M. Hasegawa and K. Hono (2008): The effect of nanocrystallization and free volume on the room temperature plasticity of Zr-based bulk metallic glasses. Acta Mater., vol 56, 5329-5339.
  2. K. Mondal, U.K. Chatterjee and B.S. Murty (2008): Oxidation Behavior of Binary Amorphous and Nanoquasicrystalline Zr-Pd and Zr-Pt Alloys. J. Alloys Compounds, vol 460, 172-181.
  3. K. Mondal and B.S. Murty (2008): Determination of kinetic parameters for devitrification of metallic glass - a theoretical approach. IIM Trans., vol 61, 319-324.

-2007

  1. K. Mondal, G. Kumar, T. Ohkubo, K. Oishi, T. Mukai and K. Hono (2007): Large apparent compressive strain of metallic glasses. Phil. Mag. Letts., vol 87, 625-635.
  2. K. Mondal, T. Ohkubo, T. Mukai and K. Hono (2007): Glass forming ability and mechanical properties of quinary Zr-based bulk metallic glasses. Mater. Trans. (JIM), vol 48, 1322-1326.
  3. K. Mondal and B.S. Murty (2007): On the Prediction of Solid-Liquid Interfacial Energy of Glass Forming Liquids from Homogeneous Nucleation Theory. Mater. Sci. Eng. A, vol 454-455, 654-661.
  4. K. Mondal, U.K. Chatterjee and B.S. Murty (2007): Oxidation Behavior of Multicomponent Zr-Based Amorphous Alloys. J. Alloys Compounds, vol 433, 162-170.

-2006

  1. K. Mondal and B.S. Murty (2006): Prediction of Maximum Homogeneous Nucleation Temperature for Crystallization of Metallic Glasses. J. Noncrystalline Sol., vol 352, 5257-5264.
  2. K. Mondal, U.K. Chatterjee and B.S. Murty (2006): Electrochemical behavior of multicomponent amorphous and nanocrystalline Zr-based alloys in different environments. Corrosion Sci., vol 48, 2212-2225.
  3. K. Mondal, U.K. Chatterjee and B.S. Murty (2006): Surface Oxides and Their Effect on the Oxidation Behavior of Amorphous and Nanoquasicrystalline Zr-Pd and Zr-Pt Alloys. J. Mater. Res., vol 21, 639-646.

-2005

  1. K. Mondal and B.S. Murty (2005): On the Parameters to Assess the Glass forming Ability of Liquids. J. Non-Cryst. Sol., vol 351, 1366-1371.
  2. K. Mondal, U.K. Chatterjee and B.S. Murty (2005): Stress Corrosion Cracking Behavior of 8090 Al- Li Alloy in Chloride Medium. Corr. Engg. Sci. Tech., vol 40, 313-320.
  3. K. Mondal, U.K. Chatterjee and B.S. Murty (2005): Electrochemical behaviour of Amorphous and Nanoquasicrystalline Zr-Pd and Zr-Pt Alloys in different environments. Corrosion Sci., vol 47, 2619-2635.

-2004

  1. K. Mondal, U.K. Chatterjee and B.S. Murty (2004): Corrosion and Oxidation Behavior of Amorphous and Nanoquasicrystalline Phases in Zr70Pd30 and Zr80Pt20 Alloys. J. Non-Cryst. Sol., vol 334-335, 544-547.

-2003

  1. K. Mondal, U.K. Chatterjee and B.S. Murty (2003): Gibb’s Free Energy for the Crystallization of Glass Forming Liquids. Appl. Phys. Lett., vol 83, 671-673.

Patents (19)

Sr. No

Developers

Description

Year

1

K. Mondal, MME, Mr. Tapendu Mandal, Research Scholar, MME ,Mr. Prem Prakash, MD, Cenogen Materials Pvt. Ltd.

Powder coating system development (2151/DEL/2010)
Indian patent

 Published on 25th October 2013 and awaiting examination

2

S, Sangal, N. Tiwari and K. Mondal

Solar drier: It is a RUTAG, IIT Kanpur development. We are in a process of hading over the technology to Rural India (small farmers).

2014 started patent document is with SIDBI

3

P.K. Rai, S. Choudhary, S. Shekhar and K.Mondal

Novel technique to generate controlled microstructure with refined and coarse grains

Patent filed (2017): 201711004918

4

Bharat Bhushan, B. S. Murty, K. Mondal

A two-step method of making Nanoporous silver micron sized powder particles

Patent Granted (2020) 342468

5

Rama Satya Sandilya V, S. Sangal, S. Shekhar, K.Mondal

Harmonic Multilayered Steel with Variable Composition

Patent granted (2020) Grant No: 340072

6

S. Sangal, K. Chandrasekhar, K. Mondal, A. Varshney, S. Sharma

A new process for making horseshoes for horses

Patent filed (2017): 201711004727

7

N. Mahata, V. Venkatesh, K.Mondal, S. Sangal, A. Banerjee

Glass forming alloys using high phosphorous pig iron

 Patent filed (2017): 201731008474

8

Nisheeth Kr. Prasad, K.Mondal, S. Choudhary, S. Chatterjee and S. Kundu

High P pig iron as sacrificial anode for cathodic protection of underground mild steel structures

 Patent filed (2017): 201731029652

9

Bharat Bhushan, Animesh Dutta, B. S. Murty, K. Mondal

Process for preparing ZnO nano-rod flowerets supported by Ni substrate and free standing pure ZnO.

 Patent filed (2018): 201811008439

10

Bharat Bhushan, Prvan Kumar Katiyar, B. S. Murty, K. Mondal

Nickel-vanadium nitride hydrophobic alloy powder

 Patent filed (2018): 201811045364

11

Nisheeth Kr. Prasad, K.Mondal, S. Choudhary, S. Chatterjee and S. Kundu

High P pig iron (3.5 and 8%P) as sacrificial anode for cathodic protection of underground mild steel structures

 Patent filed (2019): 201931006900

12

S. Khara, J. Zambre, S. Sangal, Ashim Bose, B. Bhattacharya, K. Mondal

Art of making earthenware with variable porosity and high damping capacity

Patent filed (2019): 201911038028

14

A. Bhattacharya, P.K. Rai, Neetu, S. Garg and all 8 members of Imprint proposal, K. Mondal et al.

High strength steel composition and method thereof

Patent filed (2019): 201911030090

15

K. Vishwanath, S. S. Singh and K. Mondal

Simulated marine environment device for corrosion testing

Patent filed (2019): 201911033731

16

Santigopal Samanta et al.

Ni-based amorphous coating for line pipe steel, for preventing atmosphering corrosion and hydrogen embrittlement

Patent filed (2020): 202031009500

17

D. Banik, G.P. Bajpai and K. Mondal

Press milling machine for making novel harmonic structure in metals and alloys

Patent filed (2020): 202011027557

18

S. Samanta, C. Singh, M. Dutta, K.T. Viswanath, K. Mondal and S.B. Singh

Ni-based amorphous coating for line pipe steel, for preventing atmosphering corrosion and hydrogen embrittlement

Patent filed (2020): 202033047371

19

S. Samanta, C. Singh, M. Dutta, K.T. Viswanath, K. Mondal and S.B. Singh

Ni-based amorphous coating for line pipe steel, for preventing atmosphering corrosion and hydrogen embrittlement

Patent filed (2020): 202033047372

Conferenc Proceedings (03)

  1. A. Mukherjee, M. Ghosh, K. Mondal, P Venkitanarayanan, A.P. Moon and A. Varshney (2015), Study of mechanical properties, microstructures and corrosion behavior of al 7075 t651 alloy with varying strain rate, IOP Conf. Series: Materials Science and Engineering, Vol 75, 012031.
  2. A. Moon, A.C. Vajpei, R. Balasubramaniam and K. Mondal (2010): Phase Analysis and Characterization of Rusts on Rail Steels. In: CORCON 2010, 23-25th September, Goa, India.
  3. K. Mondal, B.S. Murty and U.K. Chatterjee (2005): Corrosion and oxidation behaviour of melt spun Zr55Ti25Ni20 alloy. In: Proceedings of the International Conference on Advanced Materials Desisn and Development (ICAMDD-2005), Goa, December 2005 (in CD Rom).

Conferenc Proceedings (50)

  1. K. Mondal et al., Corrosion and wear behavior of harmonic stainless steels, 3rd International Symposium on Hetero Structure and Advanced Materials, Kyoto, 2-3 March 2019.
  2. N. Mahata, A. Banerjee, P.K. Rai, P. Bijalwan, A.S. Pathak, M. Dutta, and K. Mondal (2018), Can blast furnace iron be made into glass? New perspective, Seventh International Conference on Solidification Science and Processing (ICSSP-2018) November 19-22, 2018 Trivandrum, Kerala, India.
  3. H. S. Maharana, A Basu, K. Mondal (2017): Electrophoretic Deposition of Cu-RGO Composite Coatings and its High Temperature Oxidation Resistance (Poster), ICAMP ADMAT-SkyMat, Thiruvananthapuram, 14-16 Dec, 2017.
  4. Prvan Kumar Katiyar, S. Misra and K. Mondal (2017): Corrosion behaviour of Newly Developed TMT Steel Rebars (Poster), ICAMP ADMAT-SkyMat, Thiruvananthapuram, 14-16 Dec, 2017.
  5. Nisheeth Kr. Prasad, S.Kundu and K. Mondal (2017): High Phosphorus Pig Iron as Sacrificial Anode for Cathodic Protection of Underground Mild Steel Structures (Poster), ICAMP ADMAT-SkyMat, Thiruvananthapuram, 14-16 Dec, 2017.
  6. B. Bhushan, B. S. Murty and K. Mondal: A Two-step Method for Synthesis of Micron Sized Nanoporous Silver Powder and ZnO Nanoparticles (Poster), ICAMP, ADMAT SkyMat 2017, Thiruvananthapuram, Kerala 14-16 Dec, 2017.
  7. Prabhat K. Rai, S. Shekhar, M. Nakatani, S. K. Vajpai, M. Ota, K. Ameyama, and K. Mondal (2016): Corrosion behaviour of SUS304L austenitic stainless steel with harmonic microstructure (Poster), NMD-ATM, Kanpur, 11-14 Nov, 2016.
  8. Prabhat K. Rai, S. Shekhar, M. Nakatani, S. K. Vajpai, M. Ota, K. Ameyama, and K. Mondal (2017): Effect of harmonic structure design on the wear behavior of 304L stainless steel (Poster), ICME, Kanpur, 2-4 June, 2017.
  9. Prabhat K. Rai, S. Shekhar and K. Mondal (2017): Development of graded microstructure and effect of grain boundary fraction on corrosion behavior of mild steel (Poster), EMSI-2017, Mahabalipuram, 17-19 July, 2017.
  10. Prabhat K. Rai, S. Shekhar, M. Nakatani, S. K. Vajpai, M. Ota, K. Ameyama, and K. Mondal (2017): Corrosion and wear behavior of harmonic structured SUS304L austenitic stainless steel (Poster), Advanced Materials and Nanotechnology, Osaka, Japan, 26-28 Oct, 2017.
  11. Prabhat K. Rai, S. Shekhar and K. Mondal (2017): A new approach to gradient and harmonic structure design and its effect on electrochemical and tribological behavior, Hetero-2018, Kusatsu, Japan, 30 Oct, 2017 (Invited talk).
  12. Prabhat K. Rai, S. Shekhar and K. Mondal (2017): Development of graded microstructure and its effect on wear behavior of mild steel (Poster), ADMAT 2017 SkyMat, Thiruvananthpuram, 14-16 Dec, 2017.
  13. M. Prakash, S. Shekhar, A. P. Moon and K. Mondal (2016): Control of corrosion behaviour of mild steel by modulating machining parameters, APCCC 17, IIT Bombay, 27-30 January, 2016. (Invited talk).
  14. K. Mondal and B.S. Murty (2015): Oxidation Behavior of Bulk Metallic Glasses and Their Devitrified States, ICSSP6, Hyderabad, 24-27 Nov, 2015 (Invited talk).
  15. S. Sharma, S. Sangal and K.Mondal, Wear Behavior of Bainitic and Conventional Railand Wheel Steels, OZ-15, Kyoto 1-4 March, (Invited lecture).
  16. A. Barman, C. Chattopadhyaya, A.P. Moon, T. Aruna and K. Mondal (2015): Corrosion Behavior of In-situ Ball Milled and Atmospheric Plasma Sprayed Ni-Ti Coating on Mild Steel, LAPAMS 2015, Kolkata 15-17 January.
  17. K. Mondal (2014): Dal-Mardan - forged welded iron cannon at Bishnupur, Workshop on Archaeometallurgy and Archaemetallurgy, Dec 8-9, India.
  18. A. Varshney, S. Sangal and K. Mondal (2014): Deformation behavior of multiphase steels. In: ICEMP 2014, Bhibneswar, Feb: 26-28, India.
  19. S. Sharma, S. Sangal and K. Mondal (2014): Study on subsurface microstructural changes on dry sliding wear behavior of steel. In: ICEMP 2014, Bhibneswar, Feb: 26-28, India.
  20. A.P Moon, S. Sangal and K. Mondal (2014), Corrosion behavior of bainitic steels for railroad applications, CCIPRA 2014, B.E. College, 28Feb-1 Mar, 2014
  21. A.P Moon, S. Sangal and K. Mondal (2013), Corrosion investigations on newly developed bainitic alloys for railroad applications, NMD IIT BHU, Banaras, India, November 2013.
  22. AP. Moon, A. Barman, C. Chattopadhyay, S.T. Anand, N. Balaji, Gouthama and K. Mondal (2013): Corrosion and Erosion Characteristics of In-situ Ball Milled Atmospheric Plasma Sprayed Ni-Ti Coating on Mild Steel Authored by, ADNAN 2013, Chennai 2013 (Poster).
  23. A. P. Moon, S. Sangal and K. Mondal (2012): Corrosion and Passivation Behaviour of Newly Developed Ferritic - Pearlitic Railway Axle Steels. NMD-ATM, 16-19 November, Jamshedpur, Jharkhand, India (Poster).
  24. A. Barman, A.P. Moon, C. Chattopadhyay, and K. Mondal (2012): Corrosion Behavior of In-situ Ball milled and APS Thermally Sprayed Ni-Ti Coating on Mild Steel. NMD-ATM, 16-19 November, Jamshedpur, Jharkhand, India (Oral presentation)
  25. C. Chattopadhyay, S. Sangal and K. Mondal (2012): Evaluation of isothermal crystallization kinetics from non-isothermal experimental data for glassy alloys. In: ICSSP5-2012, Bhubneswar, 19-22 Nov, India (Oral presentation)
  26. A. Varshney, S. Sangal and K. Mondal (2012): Development of novel dual phase structural steels. In: AMPCO 2012, IIT Roorkey, Nov: 2-4, India.
  27. C. Chattopadhyay, S. Sangal and K. Mondal (2012): On the unavailability of universal glass forming ability criterion. In: IUMRS-ICA2012, Busan, August 26-31, South Korea.
  28. K. Mondal (2012): Oxidation Behavior of Zr-Based Bulk Metallic Glasses and Their Devitrified States in Air and Oxygen Environment. In: IUMRS-ICA2012, Busan, August 26-31, South Korea.
  29. S. Sharma, S. Sangal and K. Mondal (2011): High Strength Carbide-free Bainitic Steels. In: ICAMMP 2011, IIT Kharagpur 9-11th December, India.
  30. S. Sarkar, C. Chattopadhyay, A. Barman, A.P. Moon, S. Sangal and K. Mondal (2011): Simulated isothermal transformation kinetics from non-isothermal transformation data. In: In: ICAMMP 2011, IIT Kharagpur 9-11th December, India.
  31. C. Chattopadhyaya, S. Sangal and K. Mondal (2011): A study on the approximation of viscosity of undercooled liquid and glass forming ability. In: ICAMMP 2011, IIT Kharagpur 9-11th December, India.
  32. A.P. Moon, S. Sangal and K. Mondal (2011): Comparative studies on Corrosion Behaviour of Railway Axle steels. In: CORCON 2011, 28th Sept - 1st Oct, Mumbai, India.
  33. Chattopadhyay, C., Sangal, S., Mondal, K. (2011): On the Preferred Growth Direction of Primary Dendrite. In: ISMANAM 2011, 26th June- 1st July, Spain.
  34. A.K. Shukla, D.K. Mishra, R. Suresh Kumar, S.V.S.N. Murty, K. Mondal, K. Sreekumar and P.P. Sinha (2010): Processing of Cu-SiC Composites by Spark Plasma Sintering Technique. In: NMD-ATM 2010, 14-16th November, IISc Bangalore, India.
  35. A.P. Moon, A.C. Vajpei, R. Balasubramaniam and K. Mondal (2010): Phase Analysis and Characterization of Rusts on Rail Steels. In: CORCON 2010, 23-25th September, Goa, India.
  36. K. Kumar, P. Prakash, T. Mandal and K. Mondal (2010): Design and modeling of a Stampcoat Mill. In: REACH 2010, October 10th-12th, IIT Kanpur, India.
  37. K. Mondal (2010): Thermodynamics and kinetics of crystallization from undercooled liquid (POSTER). In: 2010-Indo American Frontiers of Engineering (IOFOE) symposium, Agra, India.
  38. K. Mondal (2010): Uniqueness of glassy structure on the crystallization behavior and its macroplasticity. In: Discussion meeting, Coorg, Karnataka from 21-24th Feb, India.
  39. G. Gupta, K. Mondal and R. Balasubramaniam (2009): Corrosion behaviour of in-situ nanocrystalline Fe-Si coating by mechanical alloying. In: NMD_ATM 2009, 14-16th November, Kolkata, India.
  40. B.S. Murty, Jatin Bhatt and Kallol Mondal, Thermodynamic modeling of glass forming ability International Conference on Solidification Science and Processing, November 2009, Chennai, India.
  41. K. Mondal and K. Hono (2009): Constrained and unconstrained room temperature plasticity of metallic glass. In: ICSSP-4 (ICSSP-4), November 20-23, Chennai, India.
  42. K. Mondal and K. Hono (2008): Combined effect of free volume, nanocrystal and sample geometry on the mechanical properties of bulk metallic glass (POSTER). In: Third National Conference on Frontiers in Engineering, October 24-25, Chennai, India.
  43. K. Hono, G. Kumar, K. Mondal, T. Ohkubo (2007): Nanostructure and Plasticity of Bulk Metallic Glasses. Symposium on Bulk Metallic Glasses. In: MRS Fall Meeting, Nov 26-30, Boston, USA.
  44. K. Mondal, G. Kumar, T.Ohkubo, T. Mukai and K. Hono (2007): Nanocrystallization and large compressive strain of metallic glasses. In: Japan Institute of metals, Spring meeting, March 27-29, 2007.
  45. K. Mondal, T.Ohkubo, T. Mukai and K. Hono (2006): Ageing response in a new Zr-based bulk metallic glass with improved mechanical property. In: Japan Institute of metals, Fall meeting, September 16-18, 2006.
  46. Kallol Mondal, Jatin Bhatt and B.S. Murty, Scaling up for the production of Mechanical alloying process by commercial mills Work shop on scaling up of Mechanical Alloying Processes February 2004, Kolkata, India.
  47. K. Mondal, U.K. Chatterjee and B.S. Murty (2004): Corrosion and Oxidation Behavior of Multicomponent Zr and Ti Based Amorphous and Nanocrystalline Alloys. In: 15th AGM of MRSI, February 9-11, 2004, Varanas.
  48. K. Mondal, U.K. Chatterjee and B.S. Murty (2002): Effect of Change in Structure of ZrO2 on the Oxidation Behavior of Amorphous and Nanoquasicrystalline Zr-Pd and Zr-Pt Alloys. In: NMD/ATM-2002, Vadodara, November 14-17, India.
  49. K. Mondal, U.K. Chatterjee and B.S. Murty (2002): Non-Isothermal Oxidation Behavior of Amorphous and Nanocrystalline Zr-Pd and Zr-Pt Alloys in Static Air. In: NMD/ATM-2002. Vadodara, November 14-17, India.
  50. K. Mondal, U.K. Chatterjee and B.S. Murty (2002): Oxidation and Corrosion Characteristics of Some Zr-Based Amorphous and Nanocrystalline Alloys - a Review. In: Fourth National Symposium of Research Scholars, IIT Madras, September 27-28, India.