A Continuum Damage Mechanics Model for Ductile Fracture by S. Dhar, 1995, Co-supervisor: Dr. R. Sethuraman

Axisymmetric Extrusion - Central Bursting and Die Design by N.V. Reddy, 1998, Co-supervisor: Dr. G.K. Lal

Cold Flat Rolling: Modelling with Fuzzy Parameters, Anisotropic Effects and Residual Stresses by U.S. Dixit, 1998

Finite Element Analysis of Electro-Discharge Diamond Grinding (EDDG) by V. Yadava, 2001, Co-supervisor: Dr. V.K. Jain

Modeling and Simulation of Magnetic Abrasive Finishing Process by S.C. Jayswal, Co-supervisor: Dr. V.K. Jain

Analysis of Deep Drawing Process by R.K. Saxena

Computer-Aided Interactive Analysis of Pipeline Networks by M. Karmalkar, 1986, Co-supervisor: Dr. S.G. Dhande

Study of Vibrations of Overhead Transmission Lines using FEM by R. Varadharajan, 1987, Co-supervisor: Dr. A.K. Mallik

Vibrations of Turbine Blades by FEM by A.B. Ekbote, 1987, Co-supervisor: Dr. B.L. Dhoopar

Viscoplastic Analysis of Metal Cutting by FEM by V.S. Joshi, 1987, Co-supervisor: Dr. V.K. jain

Analysis of Wire Drawing Process by FEM by A. Ramesh, 1987

Free Vibratoin Analysis of Composite Membranes by FEM by D. Sarkar, 1988, Co-supervisor: Dr. B.L. Dhoopar

Thermo-Mechanical Study of Cold Rolling by B.R. Vinay Kumar, 1988, Co-supervisor: Dr. M.K. Muju

FEM Analysis of a M/C Tool Joint as Contact Problem by M.D. Ramesh, 1988

FEM Analysis of Wire Drawing under Hydrodynamic Lubrication by R. Bannur, 1988, Co-supervisor: Dr. G.K. Lal

Static Stress Analysis of Automotive Chassis Frame using FEM by R.M. Bhatnagar, 1989

Dynamic Stress Analysis of the Root Region of a Turbine Blade by J.P. Srivastava, 1989, Co-supervisor: Dr. N.S. Vyas

FEM Analysis of Planer Bed-Carriage Interface as a Contact Problem by N. Verma, 1990

Comparative Study of Stress Fields in Blade-Disc Attachment Configurations of a Turbine Blade by P. Chaudhary, 1990, Co-supervisor: Dr. N.S. Vyas

Evaluation of Energy Release Rate in Composite Laminates by S. Shrikanth, 1991, Co-supervisor: Dr. P. Kumar

Numerical and Experimental Investigations of an Annular Disk with Radial Cracks by N. Karuppaiah, 1991, Co-supervisor: Dr. K. Ramesh

Determination of Optimal Die Profile in Wire Drawing using FEM by S. Banik, 1991, Co-supervisor: Dr. G.K. Lal

Experimental and Numerical Investigations of High Stress Gradient Problems with Emphasis on Contact Stress Analysis by V.A. Pankhawalla, 1991, Co-supervisor: Dr. K. Ramesh

Free Vibration Analysis of Rotationally Periodic Structures using Method of Complex Constraints by A. Verma, 1992, Co-supervisor: Dr. B.L. Doopar

FEM Analysis of Cold Strip Rolling under Hydrodynamic Lubrication by S. Saxena, 1992, Co-supervisor: Dr. G.K. Lal

FEM Analysis of Cold Flat Rolling of Strain Hardening Materials by R.S. Prakash, 1992, Co-supervisor: Dr. G.K. Lal

FEM Analysis of Wire Drawing of Strain Hardening Materials by U.S. Dixit, 1993

FEM Analysis of External Brake as a Contact Problem by H. Shekhar, Oct. 1993

Numerical Analysis of Cracked Plates in Bending by S. Sant, Feb. 1994

Structural and Dynamic Design of Variable Geometry Vertical Axis Wind Turbine Blade using FEM by A.V. Shevade, 1994

On the Mechanism of Sparking and FEM Simulation of ECSM Process by P.M. Pandey, 1995, Co-supervisor: Dr. V.K. Jain

FEM Analysis of Geotextile Reinforced Sand-Bed subjected to Strip Loading by A. Gharpure, 1995, Co-supervisor: P.K. Basudhar

Local Analysis of Two-Dimensional Elasto-Plastic Impact Problem by R. Patnaik, 1996

Finite Element Analysis of a Large Deformation Elasto-Plastic Contact Problem by M.S. Kulkarni, 1997

Dynamic Large Deformation Elasto-Plastic Analysis of Continua by V. Sathyanarayan, 1997

Finite Element Analysis of an Axisymmetric Upsetting Process by J.S. Bhole, 1997

A Study of Residual Stresses in Plane Strain Cold Rolling by S. Goyal, 1998

Theoretical and Experimental Investigations into Abrasive Flow Machining Process by T. Rajani Kumar, 1998, Co-supervisor: Dr. V.K. Jain

Finite Element Analysis of an Axisymmetric Cold Forging Process with Sliding Friction by K. Siva Prasad, 1998

Analysis of Residual Stresses in 3-D Forging using FEM by S.U. Samshette, 1999

Finite Element Analysis of an Axisymmetric Cold Backward Extrusion Process by J. Rama Krishna, 1999

Analysis of Residual Stresses in Axisymmetric Forging using FEM by M.P. Mungi, 1999

Finite Element Analysis of Residual Stresses in Axisymmetric Cold Forging using Coulomb Friction Model by S.D. Rasane, 2000

Finite Element Analysis of Plane Magnetic Abrasive Finishing Process by G. Benu Madhab, 2000, Co-supervisor: Dr. V.K. Jain

Finite Element Analysis of Residual Stresses in Three-Dimentional Cold Forging using Coulomb Friction Model by S.G. Chandekar, 2001

Finite Element Analysis of Dynamic Elasto-Plastic Contact Problem by Kuldeep Bhatt, 2002

Finite Element Analysis of Large Deformation Contact/Impact Problem by S. Kumar, 2002

Finite Element Analysis of 3-D Deep Drawing Process by V.S. Bandaru, 2002

Damage Prediction in 3-D Forging using Finite Element Method by K. Ganesh Babu, 2002

Defect Prediction in Axisymmetric Cold Forging - A Finite Element Analysis by Saurabh Gupta, 2002, Co-supervisor: Dr. N.V. Reddy

Finite Element Analysis of Dynamic Elasto-Plastic Contact Problem with Friction by Jaydeep U.B., 2003

Finite Element Analysis of Shadow Mask Assembly to Predict Beam Landing Shift by Rajiv Sharma, 2003

Comparison of Two Objective Stress Measures for the Analysis of Large Deformation Elasto-Plastic Impact Problems by Sachin Singh Gautam, 2003

Study of Deep Drawing Process using FEM by R. Santosh Kumar Rao, 2003