Publications in Journals
S.No. | Author(s) | Year | Title | Complete Reference of Journal |
---|---|---|---|---|
1. | S. Aravindan, J. Ramkumar and R. Krishnamurthy | 2000 | Microwave Joining of Al2O3 and SiC with Glass Inter layer | Microwave and Radio Frequency Processing Ceramic Transactions Vol 3, 287-294 |
2. | J. Ramkumar, SK Malhotra, R Krishnamurthy | 2000 | Online monitoring of oscillatory drilling of polymeric composites through acoustic emission | Indo-German Workshop on High Temperature Fibre Composite Materials, 231-242 |
3. | J. Ramkumar, R. Krishnamurthy and S. K. Mal | 2001 | Influence of tool status on flexural strength of machined CFRP components | Journal of Advanced composites letters, 10(4), 178-187 |
4. | J. Ramkumar, S. K. Malhotra and R. Krishnamurthy | 2002 | Studies on drilling of glass/epoxy laminates using coated high-speed steel drills | Journal of Materials and Manufacturing Processes, 17(2), 313-322 |
5. | J. Ramkumar, S. Aravindan, S. K. Malhotra, and R. Krishnamurthy | 2002 | Enhancing the metallurgical properties of WC insert (K-20) cutting tool through microwave treatment | Journal of materials letters, 53(3), 200-204. |
6. | A. Kakitsuji, J. Ramkumar, J. kinose, H. Mabuchi, H.Tsuda and K. Morii | 2002 | Synthesis of TiAl(Cr)/Ti2AlC composites by reactive arc-melting | Journal of Materials Transactions, 43(10), 2589-2592 |
7. | Morikawa. D, J. Ramkumar, H. Mabuchi, H. Tsuda, T. Matsui, and K. Morii, | 2002 | Microstructure and mechanical properties of Ti-B-N cast alloys prepared by reactive arc-melting | Journal of Material Transactions, 43(8), 2193-2196 |
8. | S. Aravindan, J. Ramkumar, S. K. Malhotra and R. Krishnamurthy | 2003 | Enhancement of cutting performance of cemented carbide cuttings tools by microwave treatment | Microwave and Radio Frequency Processing Ceramic Transactions, 199-206, 2003. |
9. | J. Ramkumar, S. KMalhotra, R. Krishnamurthy, Mabuchi. H, K. Demizu, K. Kakitsuji, H. Tsuda, T. Matsui and K. Morii | 2003 | Microstructure and dry sliding wear of Ti-50Al alloy and Ti-47Al-3W/Ti2AlCcomposites produced by reactive arc-melting | Journal of Material Transactions, 44(9), 1861-1865 |
10. | J. Ramkumar, A. Kaakitsuji. S.K. Malhotra, R. Krishnamurthy, H. Mabuchi, H. Tsuda, T. Matsui, and K. Morii | 2003 | Mechanical and erosion behavior of Ti-47Al-3W/Ti2AlC composites by reactive arc melting | Journal of Advanced composites letters, 12(4), 141-148 |
11. | J. Ramkumar, Aravindan. S, S. K. Malhotra and R. Krishnamurthy | 2004 | An enhancement of machining performance of GFRP by oscillatory assisted drilling | International Journal of Advanced manufacturing technology, 23(3-4): 240-244 |
12. | J. Ramkumar, S. K. Malhotra and R. Krishnamurthy, | 2004 | Effect of workpiece vibration on drilling of GFRP laminates | Journal of Materials Processing Technology, 152(3), 329-332 |
13. | J. Ramkumar, Malhotra S.K., and R. Krishnamurthy | 2005 | Effect of microwave treatment of WC inserts for drilling of GFRP composites |
Machining Science and Technology 9(2): 263-269 |
14. | B.V. Manojkumar, Bikramjit Basu, S. Kang and J. Ramkumar | 2006 | Erosion Wear behavior of TiCNNicermets containing secondary carbide (WC/NbC/TaC) | Journal of American Ceramic Society, Vol. 89(12), pp. 3827-3831 |
15. | Prasanth Kumar, Axay Kumar, Kamal. K. Kar and J. Ramkumar | 2006 | Experimental Characterization of thin Sandwich Panel of Polymer Composite | Journal of Advanced Composite letters, Vol. 15(3), pp. 89-98 |
16. | K. K. Kar, S.D. Sharma, P. Kumar, J. Ramkumar, R.K. Appaji and K. R. N. Reddy | 2006 | Analysis of Rubber Pressure Molding Technique to Fabricate Fiber Reinforced Plastic components |
Polymer Composites, Vol. 28, (5) pp. 637-649 |
17. | Deep, K. S., Reddy, N. V., Agrawal, A., J. Ramkumar. | 2006 |
A Mathematical Model for Determination of Limiting Blank Holding Force and Cavity Pressure in Hydromechanical Deep Drawing |
Journal of Engineering Manufacture, Vol. 221 (2), pp. 155-162. |
18. | K. K. Kar, S.D. Sharma, P. Kumar, J. Ramkumar, R. K. Appaji and K. R. N. Reddy | 2007 | Pressure Distribution Analysis of Fiber Reinforced Plastic Components made by Rubber Pressure Molding Technique |
Journal of Applied Polymer Science, Vol. 105(6) ,pp. 3333 -3354 |
19. | B. V. Manoj Kumar, J. Ramkumar, B. Basu and S. Kang | 2007 | Electro-discharge machining performance of TiCN-based cermets | International Journal of Refractory Metals and Hard Materials, 25 392-399. |
20. | B.V. Manoj Kumar, J. Ram Kumar and Bikramjit Basu, | 2007 | Crater Wear Mechanism of TiCN-Ni-WC Cermets during Dry Machining | International Journal of Refractory Metals & Hard Materials 25 (2007) 293-299. |
21. | J. Ramkumar, A. K. Singhal, Ritesh Kumar Singh and Prashant kumar | 2007 | Butt joining of similar &Dissimilar pipe material by cold joining process | Journal of Advanced Composite letters, Vol.16,(5), pp. 173-179. |
22. | P. B. Tailor, J. Ramkumar and K. K. Kar | 2007 | Experimental investigation on effect of alumina filler in butyl through mechanical properties | Journal of Engineering and technology, Vol. 20, 35-39 |
23. | J. Ramkumar and T. Machida | 2008 | Defect controlled Water Jet Piercing of Continuous Fiber Reinforced Plastics |
Journal of Advance Composite letters, Vol. 17( 2), pp. 55-63. |
24. | Giribaskar, S., Gouthama, Prasad, R., Ramkumar, J | 2008 | TEM studies on recovery and recrystallisation in equal channel angular extrusion processed Al-3%Mg Alloy | Transactions of the Indian Institute of Metals 61 (2-3), pp. 171-176 |
25. | I. A. Palani, S. Kanmani Subbu, N. J. Vasa, J. Ramkumar and M. Singaperumal | 2008 | Laser based Surface Processing of Engineering Materials- State of the Art | International Journal on Design and Manufacturing Technologies, Vol. 2, No. 1, pp. 1-9, 2008 |
26. | Mamilla Ravi Sankar, V. K. Jain and J. Ramkumar | 2009 | Experimental investigations into rotating workpiece Abrasive flow finishing |
Wear, Vol. 267 (1-4), pp. 43-51 |
27. | Kamal K. Kar, N. L. Ravikumar, Piyushkumar B. Tailor, J. Ramkumar, D. Sathiyamoorthy | 2009 | Preferential Media for Abrasive Flow Machining | J. Manuf. Sci. Eng. 131(1), p 011009 (pp 11) |
28. | Kamal K. Kar, N. L. Ravikumar, Piyushkumar B. Tailor, J. Ramkumar, D. Sathiyamoorthy, | 2009 | Performance Evaluation and Rheological Characterization of Newly Developed Butyl Rubber Based Media for Abrasive Flow Machining Process | Journal of Materials Processing Technology, Vol. 209, (4)pp. 2212-2221 |
29. | Mamilla Ravi Sankar, J. Ramkumar and V. K. Jain, | 2009 | Experimental investigation and mechanism of material removal in nano finishing of MMCs using abrasive flow finishing (AFF) process | Wear, Vol. 266, (7-8), pp 688-698. |
30. | Mamilla Ravi Shankar, S. Mondal, J. Ramkumar, V. K. Jain | 2009 | Experimental Investigations and Modeling of Drill Bit Guided Abrasive Flow Finishing (DBG-AFF) Process |
International journal of Advanced Manufacturing Technology, Vol. 42, (7-8) pp. 678-688 |
31. | Amit Banerjee, TrunMankad, S. Dhamodaran, J. Ramkumar, V. N. Kulkarni | 2009 | The Measurement Of attogram mass Accumulation On nanostructures During e-Beam Scanning Using Carbon Nano Pillars in Resonant Mode | Journal of Nano Technology, 20,(34) p 345501 (pp7). |
32. | Vivek Kumar , J. RamKumar , S. Aravindan , S. K. Malhotra, K. Vijai, Mukhul Shukla | 2009 | Fabrication and Characterization of ABS Nano composite reinforced by Nano sized alumina particulates | International Journal of Plastic Technology, Vol. 13,( 2), pp.. 133-149 |
33. | Nagahanumaiaha, JanakarajanRamkumarb, Nick Glumacc, Shiv G. Kapoorc and Richard E. DeVor |
2009 | Characterization of plasma in micro-EDM discharge using optical spectroscopy | Journalof Manufacturing Technology, Vol. 11, PP 82-87 |
34. | M. Ravi Sankar, V. K. Jain, J. Ramkumar, Kamal K. Kar | 2010 | Rheological characterization and performance evaluation of a new medium developed for abrasive flow finishing | International Journal of Precision Technology, Vol. 1, No. 3-4, PP 302-313 |
35. | G. Karthikeyan, J. Ramkumar, S. Dhamodaran and S. Aravindan | 2010 | Micro ED-milling Process Performance: An Experimental Investigation | International Journal of Machine tools and Manufacture, Vol. 50, PP 718-727 |
36. | K. Ponappa, S. Aravindan, P. V. Rao, J. Ramkumar, M. Gupta | 2010 | The Effect of Process Parameters on Machining of Magnesium Nano Alumina Composite Through EDM | The International Journal of Advanced Manufacturing Technology ,Vol 46 ( 9-12) , pp 1035-1042 |
37. | A. K. Singhal, Rashmi R. Devi, Vivek Kumar, J. Ramkumar, R. K. Singh | 2010 | XNBR Toughened Epoxy-Glass Fabric Composites: An Evaluation of their Static and Dynamic Mechanical Properties | International Journal of Polymer Materials, Vol.27, (2),pp. 97-112 |
38. | A.K. Singhal, Vivek Kumar, J. Ramkumar, R. K. Singh and S. K. Malhotra | 2010 | Experimental investigation of mechanical and tribological performance of XNBR rubber modified epoxy under dry sliding condition | International Journal of Plastic Technology, Volume 14, (1) ,pp 93-103. |
39. | V. Kumar, J. Ramkumar, P Kumar, S. K. Malhotra | 2010 | Mechanical and Tribological Properties of Jute Sandwich Structures | Journal of Polymer Materials 27 (3), 267-281 |
40. | M. Ravi Sankar, V. K. Jain, J. Ramkumar | 2010 | Rotational abrasive flow finishing (R-AFF) process and its effects on finished surface topography | International Journal of Machine tools and Manufacture, Vol. 50, pp 637-650 |
41. | S. Dhamodaran, J. Ramkumar | 2010 | Controlling the nano-dot formation on GaAs surface during focused gallium ion beam processing | Radiation effectsand defects in solids, Volume 165, (12), pp.889-893. |
42. | M. Ravi Sankar, J. Ramkumar, S. Aravindan | 2011 | Machining of metal matrix composites with minimum quantity cutting fluid and flood cooling | Advanced Materials Research, Materials and manufacturing ,vol 299-300, pp. 1052-1055 |
43. | Sumedah Kulkarni, Syed Nadeem Akther, J. Ramkumar | 2011 | Experimental investigation of formability enhancement using hydraulic counter pressure assisted warm deep drawing | Advanced Materials Research, Materials and Manufacturing, vol 299-300,pp. 364-367,. |
44. | A. Dhabal, D. S. Chander, J. Ramkumar, S. Dhamodaran | 2011 | Negative differential resistance in isolated GaN nano wires with focused electron beam deposited platinum contacts | Micro &Nano Letters 6 (4), 280-283 |
45. | D. Sathish Chander, J. Ramkumar, S. Dhamodaran | 2011 | Controlled 1-D to 3-D growth mode transition of GaN nano structures and their optical properties | Physica E: Low-dimensional Systems and Nanostructures 43 (9), 1683-1687 |
46. | S. Kanmani Subbu, J. Ramkumar, and S. Dhamodaran | 2011 | Plasma Temperature and Electron Density of Dry micro-EDM on Stainless Steel and Silicon: A Comparison | International Journal of Automation Technology, Vol. 5, No. 1, pp. 45-51, 2011 |
47. | S. Dhamodaran, D. S. Chander, J. Ramkumar | 2011 | Anti-reflective and hydrophobic surface of self-organized GaNnano-flowers | Applied Surface Science 257 (22), 9612-9615 |
48. | M. Ravi Sankar, V. K. Jain, J. Ramkumar, and Y. M. Joshi | 2011 | Rheological characterization of Styrene-Butadiene based medium and its finishing performance using rotational abrasive flow finishing processes | International Journal of Machine tool and Manufacture, vol 51,(12), pp. 947-957 |
49. | S. Kanmani Subbu, J. Ramkumar, S. Dhamodaran | 2011 | Elemental identification of materials using optical emission spectra during electric discharge machining | Advanced Materials Research 299, 1330-1333 |
50. | S. Kanmani Subbu, J. Ramkumar, S. Dhamodaran | 2011 | Single Discharge of Dry micro-EDM on Silicon: Crater and Plasma Temperature Measurement | Advanced Materials Research 299, 1334-1337 |
51. | S. Kanmani Subbu, G. Karthikeyan, J. Ramkumar, and S. Dhamodaran | 2011 | Plasma Characterization of Dry micro-EDM | The International Journal of Advanced Manufacturing Technology, Vol. 56, pp. 187-195 |
52. | Omprakash Rawat, S. Kanmani Subbu, J. Ramkumar, and S. Dhamodaran | 2011 | Magnetic Field Assisted micro EDM-Simulation of Field Distribution and Experimental Investigation | International Journal of Applied Engineering Research, Vol. 6, No. 5, pp. 987-992, 2011. |
53. | Sandeep Nair, Trilok Singh, Ramkumar J., Sunil Jha | 2011 | Development and Experimental Investigation of MAF Setup for Finishing of Ultra High Speed Shafts | International Journal of Abrasive Technology, Vol 4 (4), pp.. 325-345 |
54. | S. Dhamodaran, D Sathish Chander, J. Ramkumar | 2011 | GaN nanowires grown on silicon substrates engraved using stainless-steel micro-tip | Materials Letters 65, 2398-2400 |
55. | S. Dhamodaran, D. Sathish Chander, J. Ramkumar | 2011 | Anti-reflective and hydrophobic surface of self organizedGaNnanoflowers | Applied Surface Science, 257, 9612 |
56. | G. Karthikeyan, K. Sambhav, J. Ramkumar, S. Dhamodaran | 2011 | Simulation and experimental realization of micro-channels using a micro ED-milling process .. |
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Vol.225, (12) pp.2206-2219. |
57. | S. Karthikeyan, Anuj K. Garg, J. Ramkumar, S. Dhamodaran | 2012 | A microscopic investigation of machining behavior in micro ED-milling Process | Journal of Manufacturing Processes, Vol 4, issue 3,pp 297-306 |
58. | G. Karthikeyan, K. Sambhav, D. Santhosh and J. Ramkumar | 2012 | CAD based modeling and prediction of tool wear in micro ED-milling | International journal of manufacturing technology research, vol 4, issue 1/2, pp 21-34 |
59. | M. R. Sankar, V. K. Jain, J. Ramkumar, and Y. M. Joshi | 2012 | Dependence of R-AFF process on rheological characteristics of soft styrene based organic polymer abrasive medium |
International Journal of manufacturing technology research, vol 4, issue 1/2, pp 89-104 |
60. | M. Ravisankar, J. Ramkumar, V. K. Jain | 2012 | Abrasive Flow Finishing (AFF) for Micro manufacturing | Micromanufacturing Processes, 183 |
61. | M.R. Sankar, V.K. Jain, J. Ramkumar | 2012 | Effect of Abrasive Medium Ingredients on Finishing of Al Alloy and Al Alloy/SiC Metal Matrix Composites Using Rotational Abrasive Flow Finishing | Applied Mechanics and Materials 110, 1328-1335 |
62. | I. Sen, G. Karthikeyan, J. Ramkumar, R. Balasubramaniam | 2012 | A Study on Machinability of B-Modified Ti-6Al-4V Alloys by EDM | Materials and Manufacturing Processes 27 (3), 348-354 |
63. |
S. Kanmani Subbu, J. Ramkumar, S. Dhamodaran |
2012 |
Investigation of Single Pulse Discharge on Silicon: Crater and Plasma Characteristics | International Journal of Mechatronics and Manufacturing Systems, Vol 5, (5-6), pp 455-469 |
64. | S. Kanmani Subbu, J. Ramkumar, and S. Dhamodaran | 2012 | Micro-Electric Discharge Plasma: Characterization and Applications | Journal of Materials and Manufacturing processes, Vol. 27, No. 11, pp. 1208-1212, 2012. |
65. | Satish Chander D., J. Ramkumar, Dhamodaran S. | 2012 | A comparison between Raman scattering from GaNnano wires and polyhedrons | Nanoscience Methods, Vol 1, pp 129-136 |
66. | Rajesh kumar porwal, Vinod Yadava, J. Ramkumar | 2012 | Artificial neural network modeling and multi objective optimization of hole drilling electro discharge micro machining of invar |
International Journal of Mechatronics and Manufacturing Systems, Vol. 5, No 5/6,pp 470-494 |
67. | Banerjee, A., Mankad, T., Dhamodaran, S., Ramkumar, J., Kulkarni | 2012 | Dynamic characterization and mechanical properties of FIB grown nano pillars | International Journal of Nanotechnology 9 (10-12) , pp. 972-981 |
68. | G. Karthikeyan, J. Ramkumar, S. Aravindan | 2012 | Performance analysis of micro ED-milling process using various statistical techniques | International Journal of Machining and Machinability of Materials VO. 11 (2) pp. 183-203 |
69. | C. Samanta, D. S. Chander, J. Ramkumar, S. Dhamodaran | 2012 | Catalyst and its diameter dependent growth kinetics of CVD grown GaN nanowires | Materials Research Bulletin 47 (4), 952-956 |
70. | Rajesh Kumar Porwal, Vinod Yadava and J. Ramkumar | 2013 | Optimization of process parameters in the hole drilling electrical discharge micro machining of titanium based super alloy thin sheet. | Journal of Machining and Forming Technology, Vol. 5, pp. 175-188 |
71. | Rajesh Kumar Porwal, Vinod Yadava and J. Ramkumar | 2013 | Modeling and Optimization of Hole Drilling Electrical Discharge Micromachining Process of Ti-6Al-4V Thin Sheet | International Journal of Precision Technology, Vol. 3, No.2, pp. 183-205 |
72. | Chandra Sekhar Sathua, V. K. Jain, J. Ramkumar, Ajay Sidpara | 2013 | Analysis of Forces and Surface Roughness in Magnetic Abrasive Finishing with a ball end tool | Int.J. Precision Technology, Vol 3, No 2,pp 131-142 |
73. | Avinash Kumar, Ankur Gupta, Rishi Kant, Syed Nadeem Akhtar, Nachiketa Tiwari, J. Ramkumar, Shantau Bhattachary | 2013 | Optimization of laser machining process for the preparation of photo masks and its application to micro systems fabrication | Journal of Micro/Nanolithography, MEMS and MOEMS.Vo. 12. No.4 p041203 (9 pp) |
74. | Kumar Pallav, Peidog Han, J. Ramkumar, NagHanumaiah, KornelEhman | 2013 | Comparative Assessment of the laser induced plasma Micro-Machining (LIP-MM) and the Micro-EDM processes | J.Manuf.Sci.Eng, DOI 10.1115/1.4025391. |
75. | T. V. K. Gupta, J. Ramkumar, Puneet Tandon, N. S. Vyas | 2013 | A study on the deviations of the jet with traverse speeds of different materials in pocket milling using Abrasive water Jet Machining Processes | Applied Mechanics & Materials, Vol.372,pp 402-405, Trans Tech Publications, |
76. | Govind Dayal, Syed Nadeem Akhtar, S. Anatha Ramkrishnan and J. Ramkumar | 2013 | Excimer laser micromachining using binary mask protection for large are patterning with single micrometer feature | J.Micro Nano-Manuf.1.031002 1(3) (7pages); DOI: 10.1115/1.4024880. |
77. | Rajesh Kumar Porwal, Vinod Yadava, J. Ramkumar | 2013 | Modeling and Multi-Response Optimization of hole sinking electrical discharge micromachining of titanium alloy thin sheet | Joural of Mechanical science and Technology, Paper number: MEST-D-1300358R1, 3(2), pp 183-205
|
78. |
Rajesh Kr. Porwal, Vinod Yadava, J. Ramkumar | 2013 |
Optimization of process parameters in the hole sinking electro discharge micromachining using GRA-PCA | Journal of Manufacturing Engineering, Vol. 8, ( 2), pp. 96-104 |
79. | Rajesh Kumar Porwal, Vinod Yadava, J. Ramkumar | 2013 | Multi-Objective Optimization of Hole Drilling Electrical Discharge Micromachining Process using Grey Relational Analysis coupled with Principal Component Analysis | Journal of The Institution of Engineers (India): Series C, Volume 94, ( 4), pp 317-325 |
80. | T. V. K. Gupta, J. Ramkumar, Puneet Tandon, N. S. Vyas | 2013 | Role of process parameters on pocket milling with Abrasive Water Jet Machining technique | International Journal of Mechanical Science and Engineering, 2013, Vol. 7, No. 10, pp. 627-632 |
81. | Gupta T. V. K., Ramkumar J., Tandon P., and Vyas N. S., |
2013 | A study on deviations of the jet with traverse speeds on different materials in pocket milling using Abrasive Water Jet Machining Process, |
International Journal of Applied Mechanics and Materials, 372, 402-405. |
82. | Rajesh Kumar Porwal, Vinod Yadava, J. Ramkumar | 2014 | Neural Network based Modeling and GRA coupled PCA Optimization of Hole Sinking Electro Discharge Micro machining | International Journal of Manufacturing, Materials, and Mechanical Engineering. 4(1), pp. 1-21. |
83. | Syed Nadeem Akhtar, Hirendra Choudhary, S. Anantha Ramakrishna and J. Ramkumar | 2014 | Simulation and experiments on excimer laser micromachining of metal and polymer | Journal of Micro / Nanolithography, MEMS, and MOEMS 13(1), 013008-013008 |
84. | G. Karthikeyan, J. Ramkumar, S. Dhamodaran | 2014 | Block EDG: issues and applicability in multiple pass micro ED-milling | Machining Science and Technology 18 (1), 120-136 |
85. | K. Pallav, P. Han, J. Ramkumar, K. F. Ehmann | 2014 | Comparative Assessment of the Laser Induced Plasma Micro machining and the Micro-EDM Processes | Journal of Manufacturing Science and Engineering 136 (1), 011001 |
86. | R.K. Porwal, V. Yadava, J. Ramkumar | 2014 | Modelling and multi-response optimization of hole sinking electrical discharge micro machining of titanium alloy thin sheet | Journal of Mechanical Science and Technology 28 (2), 653-661 |
87. | D. Jhodkar, M. Amaranth, H. Chelladurai, J. Ramkumar | 2014 | Experimental Investigations on the Effect of Vegetable Based Cutting Fluid in Turning AISI 1040 Steel | Applied Mechanics and Materials 541, 368-373 |
88. | Jefferson, Hari and J. Ramkumar | 2014 | Micro machining performance and surface quality comparison of using cryogenically treated copper-tungsten tool/AISI 304 work piece in micro EDM milling | Recent Patents on Mechanical Engineering. Reference#: BSP-MENG-2014-56 Machining Science and Technology |
89. | B. Muralidharan, H. Chelladurai, J. Ramkumar | 2015 | Experimental Investigation on Electro-Discharge Deposition Process | International Mechanical Engineering Congress and Exposition .Volume 76, Issue 1-4, pp. 69-82. |
90. | Dharmesh Kumar ; Syed N. Akhtar ; Anup K. Patel; J. Ramkumar ; Dr. Kantesh Balani | 2015 | Tribological Performance of Laser Peened Ti-6Al-4V | Journal of Wear, 322, 203-217 |
91. | Syed Nadeem Akhtar, Shashank Sharma, S. Anantha Ramakrishna, and J. Ramkumar | 2015 | Excimer laser micromachining of oblique microchannels on thin metal films using square laser spot | Sadhana Academy Proceedings in Engineering Science |
92. | Divyansh Patel, V. K. Jain, J. Ramkuma | 2015 | Surface Texturing for Inducing Hydrophobicity | Directions IIT Kanpur Publications, Vol. 15-1, pp. 46-53 |
93. | Divyansh Patel, V. K. Jain, J. Ramkumar | 2015 | Micro texturing on metallic surfaces: State-of-the-art | Proceedings of the Institution of Mechanical Engineers, Part B. |
94. | Ajay Vardhaman B. S, M. Amarnath, Durwesh Jhodkar, J. Ramkumar, H. Chelladurai, M. K. Roy | 2015 | Influence of coconut oil on tribological behavior of carbide cutting tool insert during turning operation | Journal of Cleaner Production |
95. | Ajay Vardhaman B. S, M. Amarnath, Durwesh Jhodkar, J. Ramkumar and H. Chelladurai | 2015 | Examining the Role of Cutting Fluids in Machining AISI 1040 Steel Using Tungsten Carbide Insert under Minimal Quantity Lubrication Condition | International Institute of Engineers |
96. | Amandeep Singha, Deepu Philip , J. Ramkumar | 2015 | Quantifying green manufacturability of a unit production process using simulation | Procedia CIRP 29 ( 2015 ) 257-262 |
97. | Durwesh Jhodkar, H. chelladurai, M. Amarnath and J. Ramkumar | 2015 | Performance evaluation of Microwave Treated Cemented Carbide insert on AISI 1040 steel during turning process |
ASME 2015, Applied mechanics and materials conference. McMat2015-6318 |
98. | Nishith Verma, Prateek Khare, Janakaranjan Ramkumar, | 2015 | Control of Bacterial Growth in Water using Novel Laser-Ablated Metal-Carbon-Polymer Nanocomposite-based Microchannels | Chemical Engineering Journal 276 (2015) 65-74. |
99. | Bhargava, Neelima; Shanmugaiah, Vellasamy; Balakrishnan, Karuppiah; Ramkumar, Janakarajan; Das, Mainak | 2015 | Comparing the Adhesion and Survival of Adult Rod and Cone Photoreceptor Neurons on Poly-D-Lysine and Concanavalin-A Substrate | Journal of Biomaterials and Tissue Engineering, Volume 5, Number 6, June 2015, pp. 431-438(8). |
100. | F. Islam, J. Ramkumar & A.S. Milani | 2015 | A simplified damage prediction framework for milling of unidirectional carbon fiber-reinforced plastics | Polymer & Composites Science, 1:4, 175-184, DOI: 10.1080/20550340.2015.1117747. |
101. | T. V. K. Gupta, J. Ramkumar , Puneet Tandon , N. S. Vyas | 2015 | Application of Artificial Neural Networks in Abrasive Water Jet Milling | Procedia CIRP 37 ( 2015 ) 225-229. |
102. | Akhtar, S. N., Sharma, S., Dayal, G., Ramakrishna, S. A., & Ramkumar, J. | 2015 | Micro feature edge quality enhancement in excimer laser micromachining of metal films by coating with a sacrificial polymer layer | Journal of Micromechanics and Microengineering, 25(6), 065001. |
103. | Akhtar, S. N., Sharma, S., Dayal, G., Ramakrishna, S. A., & Ramkumar, J. | 2015 | Excimer laser micromachining of oblique micro channels on thin metal films using square laser spot | Ref no:- Ms. No.SADH-D- 15-00069R3 |
104. | Rita Maurya, Binit Kumar, S. Ariharan, J. Ramkumar, Kantesh Balani | 2016 | Effect of carbonaceous reinforcements on the mechanical and tribological properties of friction stir processed Al6061 alloy | Materials and Design 98 (2016) 155-166. |
105. | M. Ravi Sankar, V. K. Jain, J. Ramkumar | 2016 | Nano-finishing of cylindrical hard steel tubes using rotational abrasive flow finishing (R-AFF) process | Int J Adv Manuf Technol DOI 10.1007/s00170-015-8189-5 |
106. | Leeladhar Nagdeve, V. K. Jain, J. Ramkumar | 2016 | Experimental Investigations into nano-finishing of freeform surfaces using negative replica of the knee joint | Procedia CIRP 42 ( 2016 ) 793-798 |
107. | Prateek Khare, Ashish Yadav, Janakranjan Ramkumar, Nishith Verma | 2016 | Microchannel-embedded metal-carbon-polymer nanocomposite as a novel support for chitosan for efficient removal of hexavalent chromium from water under dynamic conditions | Chemical Engineering Journal 293 (2016) 44-54 |
108. | Amandeep Singh, Deepu Philip , J. Ramkumar | 2016 | Green Index quantification of a unit manufacturing process through simulation experiments | Procedia CIRP 41 1131-1136 |
109. | P Murkute, J Ramkumar, S Choudhary, K Mondal` | 2016 | Effect of alternate corrosion and wear on the overall degradation of a dual phase and a mild steel | Wear 368, 368-378 |
110. | P Murkute, S Choudhary, J Ramkumar, K Mondal | 2016 | Effect of Exposure Face Orientation and Tilt Angle on Immersion Corrosion Behavior of Dual-Phase and Mild Steels | Journal of Materials Engineering and Performance, 1-10 |
111. | P Murkute, J Ramkumar, K Mondal | 2016 | Stress Corrosion Cracking Behavior of Interstitial Free Steel Via Slow Strain Rate Technique | Journal of Materials Engineering and Performance 25 (7), 2878-2888 |
112. | F. Islam, B. Crawford, P. Pal, J. Ramkumar, A.S. Milani | 2016 | Modelling of nano-finishing forces and surface roughness in abrasive flow finishing process using rheological properties | International Journal of Precision Technology 6 (2), 123-141 |
113. | Rao R.V., Rai D.P., Ramkumar J., Balic J. | 2016 | A new multi-objective Jaya algorithm for optimization of modern machining processes | Advances in Production Engineering & Management, Volume 11,Number 4, pp 271-286 | 114. | Yaswanth K. Penke , Ganapathi Anantharaman, Janakarajan Ramkumar, and Kamal K. Kar | 2017 | Aluminum Substituted Cobalt Ferrite (Co-Al-Fe) Nano Adsorbent for Arsenic Adsorption in Aqueous Systems and Detailed Redox Behavior Study with XPS | ACS Appl. Mater. Interfaces,9 (13), 11587-11598 | 115. | Leeladhar Nagdeve, Ajay Sidpara, V. K. Jain & J. Ramkumar | 2017 | On the effect of relative size of magnetic particles and abrasive particles in MR fluid-based finishing process | Machining Science and Technology, 22(3), 493-506 | 116. | Leeladhar Nagdeve, V. K. Jain & J. Ramkumar | 2017 | Differential finishing of freeform surfaces (Knee Joint) using R-MRAFF process and negative replica of workpiece as afixture | Machining Science and Technology, 22(4), 671-695 | 117. | Aakash Tyagi,Vyom Sharma, V. K. Jain & J. Ramkumar | 2017 | Investigations into side gap in Wire Electrochemical Micromachining (Wire-ECMM) | International Journal of Advanced Manufacturing Technology, 94(9-12), 4469-4478 | 118. | G.V.L. Parameswari, V. K. Jain & J. Ramkumar,Leeladhar Nagdeve | 2017 | Experimental investigations into nano finishing of Ti6Al4V flat disc using Magnetorheological finishing process | International Journal of Advanced Manufacturing Technology, 1-11,2017 | 119. | Sahil Kajal, Leeladhar Nagdeve,V. K. Jain & J. Ramkumar | 2017 | Experimental and theoretical investigations into internal Magnetic Abrasive Finishing of a Revolver Barrel | International Journal of Advanced Manufacturing Technology(2017):1-18 | 120. | Harsh Sheokand, Saptarshi Ghosh, Gaganpreet Singh, Mondeep Saikia, Kumar Vaibhav Srivastava, J. Ramkumar, and S. Anantha Ramakrishna | 2017 | Transparent broadband metamaterial absorber based on resistive films | Journal of Applied Physics, 122(10), 105105 | 121. | Abhilasha Singh, Divyansh Singh Patel, J. Ramkumar & Kantesh Balani | 2017 | Single step laser surface texturing for enhancing contact angle and tribological properties | Int J Adv Manuf Technology, (2017):1-15 | 122. | Leeladhar Nagdeve, V. K. Jain and J. Ramkumar | 2017 | Preliminary investigations into nano-finishing of freeform surface (femoral) using inverse replica fixture | The International Journal of Advanced Manufacturing Technology, (2017): 1-12 | 123. | Divyansh Singh Patel, Abhilasha Singh, V. K. Jain, J. Ramkumar & A. Shrivastava | 2017 | Investigations into insertion force of electrochemically micro-textured hypodermic needles | The International Journal of Advanced Manufacturing Technology , (2017): 1-16 | 124. | B.S. Ajay Vardhaman, M. Amarnath, J. Ramkumar, and Prabhat K. Rai | 2018 | Experimental Investigations to Enhance the Tribological Performance of Engine Oil by Using Nano-Boric Acid and Functionalized Multiwalled Carbon Nanotubes: A Comparative Study to Assess Wear in Bronze Alloy | Journal of Materials Engineering and Performance, (2018): 1-14 | 125. | Kiran Kumar Surthi , Bibekananda De, J. Ramkumar , Kamal K. Kar | 2018 | Enhancement of the surface reactivity of zigzag boron nitride nanoribbons by chlorine gas decoration: A computational study | Journal of Physics and Chemistry of Solids, 120, 34-43 | 126. | Ambuj Shah, Arvind Kumar , J. Ramkumar | 2018 | Analysis of transient thermo-fluidic behavior of melt pool during spot laser welding of 304 stainless-steel | Journal of Materials Processing Technology, 256, 109-120 | 127. | Durwesh Jhodkar, M. Amarnath, H. Chelladurai,J.Ramkumar | 2018 | Experimental investigations to enhance the machining performance of tungsten carbide tool insert using microwave treatment process | Journal of the Brazilian Society of Mechanical Sciences and Engineering, 40(4), 200 | 128. | Koshal Kishor, Alhad Parashtekar, Sulay Saha, Sri Sivakumar, Janakarajan Ramkumar and Raj Ganesh S. Pala | 2018 | Rational Design Strategy for Optimization of Clamping Pressure to Minimize Contact Resistance between Electrode and Current Collector while Preserving Porosity of Electrodes in Water Electrolyzers | Canadian Journal of Chemical Engineering,96(4), 881-885 | 129. | Durwesh Jhodkar, H. Chelladurai, Akhilesh Kumar Choudhary & J. Ramkumar | 2018 | Comparison of machining performance of microwave post-heated WC insert with dry, wet and MQL cutting in turning operation | Journal of Microwave Power and Electromagnetic Energy, 52(2), 109-127 | 130. | Amandeep Singh , Deepu Philip , J. Ramkumar , Mainak Das | 2018 | A simulation based approach to realize green factory from unit green manufacturing processes | Journal of Cleaner Production , 182, 67-81 | 131. | Durwesh Jhodkar, M. Amarnath, H. Chelladurai, and J. Ramkumar | 2018 | Performance assessment of microwave treated WC insert while turning AISI 1040 steel | Journal of Mechanical Science and Technology, 32(6), 2551-2558 | 132. | L. Nagdeve, V. K. Jain, J. Ramkumar | 2018 | Nanofinishing of freeform/sculptured surfaces: state-of-the-art | Manufacturing Review,5, 6 | 133. | V Sharma, D.S. Patel, V.K. Jain, J. Ramkumar, A Tyagi | 2018 | Wire Electrochemical Threading: A Technique for Fabricating Macro/Micro Thread Profiles | Journal of The Electrochemical Society, 165(9), E397-E405 | 134. | M. R. Sankar, V. K. Jain, J. Ramkumar, S. K. Sareen, S. Singh | 2018 | Medium rheological characterization and performance study during rotational abrasive flow finishing (R-AFF) of Al alloy and Al alloy/SiC MMCs | The International Journal of Advanced Manufacturing Technology , 1-15 | 135. | Divyansh Singh Patel, Abhilasha Singh, K. Balani, J. Ramkumar | 2018 | Topographical effects of laser surface texturing on various time-dependent wetting regimes in Ti6Al4V | Surface and Coatings Technology, 2018 | 136. | Pragya Shukla, Shikha Awasthi, Janakarajan Ramkumar, Kantesh Balani | 2018 | Protective trivalent Cr-based electrochemical coatings for gun barrels | Journal of Alloys and Compounds, 768, 1039-1048 | 137. | A. K. Yadav, S. Banerjee, R Kumar, K. K. Kar, J. Ramkumar, K. Dasgupta | 2018 | Mechanical Analysis of Nickel Particle-Coated Carbon Fiber-Reinforced Epoxy Composites for Advanced Structural Applications | ACS Applied Nano Materials,1(8), 4332-4339 | 138. | Hitendra Kumar, J. Ramkumar, K.S. Venkatesh | 2018 | Surface texture evaluation using 3D reconstruction from images by parametric anisotropic BRDF | Measurement,125, 612-633 | 139. | S. Sharma, V. Mandal, S.A. Ramakrishna, J. Ramkumar | 2018 | Numerical simulation of melt hydrodynamics induced hole blockage in Quasi-CW fiber laser micro-drilling of TiAl6V4 | Journal of Materials Processing Technology, 262, 131-148 | 140. | Yaswanth K. Penke, Ganapathi Anantharaman, Janakarajan Ramkumar, Kamal K. Kar | 2018 | Redox Synergistic Mn-Al-Fe and Cu-Al-Fe Ternary Metal Oxide Nano Adsorbents for Arsenic Remediation with Environmentally Stable As(0) Formation | Journal of Hazardous Materials,364, 519-530 | 141. | Durwesh Jhodkar, M. Amarnath, H. Chelladurai, J. Ramkumar | 2018 | Experimental Investigations to Study the Effects of Microwave Treatment Strategy on Tool Performance in Turning Operation | Journal of Materials Engineering and Performance,27(12), 6374-6388 | 142. | Sharma, V., Srivastava, I., Tyagi, A., Jain, V. K., & Ramkumar, J. | 2018 | Theoretical and Experimental Investigations into Wire Electrochemical Turning (Wire-ECTrg) Process Using Finite Element Method | Journal of The Electrochemical Society, 165(14), E773-E783 | 143. | Sheokand, H., Singh, G., Ghosh, S., Ramkumar, J., Ramakrishna, S. A., & Srivastava, K. V. | 2019 | An Optically Transparent Broadband Microwave Absorber Using Interdigital Capacitance | IEEE Antennas and Wireless Propagation Letters, 18(1), 113-117 | 144. | Singh, G., Sheokand, H., Ghosh, S., Srivastava, K. V., Ramkumar, J., & Ramakrishna, S. A. | 2019 | Excimer laser micromachining of indium tin oxide for fabrication of optically transparent metamaterial absorbers | Applied Physics A, 125(1), 23 | 145. | Penke, Y. K., Tiwari, N., Jha, S., Bhattacharyya, D., Ramkumar, J., & Kar, K. K | 2019 | Arsenic surface complexation behaviour in aqueous systems onto Al substituted Ni, Co, Mn, and Cu based ferrite nano adsorbents | Journal of hazardous materials, 361, 383-393 | 146. | D.S. Patel, V.K. Jain, A Shrivastava, J. Ramkumar | 2019 | Electrochemical micro texturing on flat and curved surfaces: simulation and experiments | The International Journal of Advanced Manufacturing Technology, 100, 1269-1286 | 147. | S. Sharma, V. Mandal, S.A. Ramakrishna, J. Ramkumar | 2019 | Numerical simulation of melt pool oscillations and protuberance in pulsed laser micro melting of SS304 for surface texturing applications | Journal of Manufacturing Processes, 39, 282-294 | 148. | G. Singh, H. Sheokand, K. Chaudhary, K.V. Srivastava, J. Ramkumar, | 2019 | Fabrication of non-wettable wearable textile based metamaterial microwave absorber | Journal of Physics D: Applied Physics | 149. | V. Sharma, I. Srivastava, V.K. Jain, J. Ramkumar | 2019 | Modelling of Wire Electrochemical Micromachining (Wire-ECMM) process for anode shape prediction using finite element method | Electrochimica Acta | 150. | Mahavir Singh, J. Ramkumar, R. V. Rao, J. Balic | 2019 | Experimental investigation and multi-objective optimization of micro-wire electrical discharge machining of a titanium alloy using Jaya algorithm | Advances in Production Engineering & Management, 14(2), https://doi.org/10.14743/apem2019.2.326 | 151. | Mahavir Singh, Amandeep Singh, J. Ramkumar | 2019 | Thin-wall micromachining of Ti-6Al-4V using micro-wire electrical discharge machining process | Journal of the Brazilian Society of Mechanical Sciences and Engineering, 41:338, https://doi.org/10.1007/s40430-019-1827-3 | 152. | Pragya Tripathi, J. Ramkumar, Kantesh Balani | 2019 | Laser peening enhances tribological resistance of electrodeposited Cr coatings reinforced with yttria stabilized zirconia and carbon nano tubes | Surface & Coatings Technology,Volume 378, 124919, https://doi.org/10.1016/j.surfcoat.2019.124919 | 153. | H.S. Maharana, Ravi Kumar, S.V.S. Narayana Murty, J. Ramkumar, K. Mondal | 2019 | Surface micro-texturing of dual phase steel and copper by combining laser machining and electrochemical dissolution | Journal of Materials Processing Technology, 116260. doi:10.1016/j.jmatprotec.2019.116260 | 154. | Ganesh B. Shirsatha, K. Muralidhara, Raj Ganesh S. Pal, J. Ramkumar | 2019 | Condensation of water vapor underneath an inclined hydrophobic textured surface machined by laser and electric discharge | Applied Surface Science. doi:10.1016/j.apsusc.2019.04.076 | 155. | Leeladhar Nagdev, V.K Jain and J. Ramkumar | 2019 | Development of inverse replica fixture for Nano-finishing of knee joint using R-MRAFF process | Journal of micromanufaturing (JMF) | 156. | Yaswanth K.Penke, Amit Yadav, Prerna Sinha, Iram Malik, Janakarajan Ramkumar and Kamal K Kar | 2020 | Arsenic Remediation onto Redox and Photo-catalytic/electrocatalytic Mn-Al-Fe Impregnated rGO: Sustainable Aspects of Sludge as Supercapacitor | Chemical Engineering Journal, doi.org/10.1016/j.cej.2019.124000 | 157. | V Mandal, S Sharma, J Ramkumar | 2020 | Numerical Simulation of Heat Transfer and Fluid Flow in Co-axial Laser Cladding of Ti6Al4V Alloys | Advances in Simulation, Product Design and Development, 241-254 | 158. | V Sharma, V K Jain, J Ramkumar | 2020 | Investigations into Wire Electrochemical Machining of Stainless Steel 304 | Advances in Unconventional Machining and Composites, 41-52 | 159. | V Mandal, A Singh, GS Yadav, J Ramkumar, S Agrawal | 2020 | Experimental Investigation on Surface Topography of the Natural Ceramics in Abrasive Water Jet Cutting and Its Optimization Validation by Formulated Model | Advances in Unconventional Machining and Composites, 347-360 | 160. | RK Thakur, KK Singh, J Ramkumar | 2020 | Experimental investigation of abrasive waterjet hole cutting on hybrid carbon/glass composite | Materials Today: Proceedings 21, 1551-1558 | 161. | R N Yadav, R K Porwal, J Ramkumar | 2020 | Experimental Modeling of EDMed Aluminum Metal Metrix Composite: A Review | Emerging Trends in Mechanical Engineering, 511-518 | 162. | K Chaudhary, G Singh, J Ramkumar, S A Ramakrishna, K V Srivastava, | 2020 | Optically transparent protective coating for ITO-coated PET-based microwave metamaterial absorbers | IEEE Transactions on Components, Packaging and Manufacturing Technology 10 | 163. | J M Jafferson, P Hariharan, J Ramkumar | 2020 | Correlation of Three-Dimensional Roughness Parameters With the Crater Dimensions in MircoED-Milling of Cryogenic-Treated Tool and Workpiece | Journal of Micro and Nano-Manufacturing 8 (1) | 164. | H S Maharana, SVSN Murty, J Ramkumar, K Mondal | 2020 | Continuous and ordered surface microtexturing on Cu and Ni-based alloys by novel electrochemical dissolution | Journal of Alloys and Compounds 817, 153263 | 165. | P Tripathi, P K Katiyar, J Ramkumar, K Balani | 2020 | Synergistic role of carbon nanotube and yttria stabilised zirconia reinforcement on wear and corrosion resistance of Cr-based nano-composite coatings | Surface and Coatings Technology 385, 125381 | 166. | D S Patel, V Sharma, VK Jain, J Ramkumar | 2020 | Reducing overcut in electrochemical micromachining process by altering the energy of voltage pulse using sinusoidal and triangular waveform | International Journal of Machine Tools and Manufacture 151, 103526 | 167. | L Nagdeve, V K Jain, J Ramkumar | 2020 | Optimization of process parameters in nano-finishing of Co-Cr-Mo alloy knee joint | Materials and Manufacturing Processes, 1-8 | 168. | R K Thakur, K K Singh, J Ramkumar | 2020 | Delamination analysis and hole quality of hybrid FRP composite using abrasive water jet machining | Materials Today: Proceedings | 169. | Y Tayde, K Chaudhary, G Singh, A Dhumal, M Saikia, KV Srivastava | 2020 | An optically transparent and flexible microwave absorber for X and Ku bands application | Microwave and Optical Technology Letters 62 (5), 1850-1859 | 170. | E Saraswat, H S Maharana, SVSN Murty, S Shekhar, K K Kar, J Ramkumar | 2020 | Fabrication of Al-Si controlled expansion alloys by unique combination of pressureless sintering and hot forging | Advanced Powder Technology | 171. | M Singh, P Saxena, J Ramkumar, R V Rao | 2020 | Multi-spark numerical simulation of the micro-EDM process: an extension of a single-spark numerical study | The International Journal of Advanced Manufacturing Technology, 1-15 | 172. | Y K Penke, A K Yadav, P Sinha, I Malik, J Ramkumar, K K Kar | 2020 | Arsenic remediation onto redox and photo-catalytic/electrocatalytic Mn-Al-Fe impregnated rGO: Sustainable aspects of sludge as supercapacitor | Chemical Engineering Journal 390, 124000 | 173. | BSA Vardhaman, M Amarnath, J Ramkumar, K Mondal | 2020 | Enhanced tribological performances of zinc Oxide/MWCNTs hybrid nanomaterials as the effective lubricant additive in engine oil | Materials Chemistry and Physics, 123447 | 174. | D S Patel, V Agrawal, J Ramkumar, V K Jain, G Singh | 2020 | Micro-texturing on free-form surfaces using flexible-electrode through-mask electrochemical micromachining | Journal of Materials Processing Technology, 282, 116644 | 175. | M Singh, V K Jain, J Ramkumar | 2020 | Micro-texturing on flat and cylindrical surfaces using electric discharge micromachining | Journal of Micromanufacturing, 2516598420980404 | 176. | M Law, R Karthik, S Sharma, J Ramkumar | 2020 | Finish turning of hardened bearing steel using textured PcBN tools | Journal of Manufacturing Processes 60, 144-161 | 177. | Y K Penke, P Sinha, A K Yadav, J Ramkumar, K K Kar | 2020 | Al3+-doped 3d-transitional metal (Mn/Cu) ferrite impregnated rGO for PEC water-splitting/supercapacitor electrode with oxygen vacancies and surface intercalation aspects | Composites Part B: Engineering 202, 108431 | 178. | S Kumar, K K Singh, J Ramkumar | 2020 | Comparative study of the influence of graphene nanoplatelets filler on the mechanical and tribological behavior of glass fabric-reinforced epoxy composites | Polymer Composites 41 (12), 5403-5417 | 179. | A S Shirale, S Sahu, S K Patel, J Ramkumar, S Shekhar | 2020 | An analytical modelling of cutting forces in orthogonal elliptical vibration cutting | Journal of Micromanufacturing, 2516598420936131 | 180. | J Ramkumar, G Ranjit, V Sarath, V Vikraman, B Suresh, NP Babu, M Amit | 2020 | Design Optimization of Lubrication System for a Four-Cylinder Diesel Engine | Advances in Automotive Technologies, 139-155 | 181. | Y K Penke, A K Yadav, I Malik, A Tyagi, J Ramkumar, K K Kar | 2021 | Insights of arsenic (III/V) adsorption and electrosorption mechanism onto multi synergistic (redox-photoelectrochemical-ROS) aluminum substituted copper ferrite impregnated rGO | Chemosphere 267, 129246 | 182. | A Rajput, J Ramkumar, K Mondal | 2021 | Effect of pearlitic morphology with varying fineness on the cavitation erosion behavior of eutectoid rail steel | Ultrasonics Sonochemistry 71, 105399 | 183. | M Singh, S Mishra, V Yadava, J Ramkumar | 2021 | Parametric Analysis of Laser Beam Percussion Drilling for Thin Titanium Alloy Sheet Using Yb: Yag Fiber Laser | Journal of Advanced Manufacturing Systems | 184. | V Sharma, D S Patel, V Agrawal, V K Jain, J Ramkumar | 2021 | Investigations into machining accuracy and quality in wire electrochemical micromachining under sinusoidal and triangular voltage pulse condition | Journal of Manufacturing Processes 62, 348-367 | 185. | R A Mali, TVK Gupta, J Ramkumar | 2021 | A comprehensive review of free-form surface milling Advances over a decade | Journal of Manufacturing Processes 62, 132-167 | 186. | S Onkar, J Ramkumar | 2021 | Thermo-Hydraulic Performance of Square Micro Pin Fins under Forced Convection | International Journal of Heat and Technology 39 (1), 170-178 | 187. | A Rajput, J Ramkumar, K Mondal | 2021 | Effect of pearlitic morphology with varying fineness on the cavitation erosion behavior of eutectoid rail steel | Ultrasonics Sonochemistry 71, 105399 | 188. | YK Penke, AK Yadav, I Malik, A Tyagi, J Ramkumar, KK Kar | 2021 | Insights of arsenic (III/V) adsorption and electrosorption mechanism onto multi synergistic (redox- photoelectrochemical-ROS) aluminum substituted copper ferrite impregnated rGO | Chemosphere 267, 129246 | 189. | P Tripathi, J Ramkumar, K Balani | 2021 | Microscratching and fretting of electro-co-deposited Cr-based composite coatings with BN, graphene, and diamond reinforcements | Journal of Materials Science 56 (10), 6148-6166 | 190. | RK Thakur, KK Singh, J Ramkumar | 2021 | Impact of nanoclay filler reinforcement on CFRP composite performance during abrasive water jet machining | Materials and Manufacturing Processes, 1-10 | 191. | KKS Tomar, NV Srinath, J Ramkumar, SN Singh | 2021 | Level-one house agent-based decentralized resilient energy management | Electrical Engineering, 1-9 | 192. | M Singh, S Mishra, V Yadava, J Ramkumar | 2021 | Parametric Analysis of Laser Beam Percussion Drilling for Thin Titanium Alloy Sheet Using Yb: Yag Fiber Laser | Journal of Advanced Manufacturing Systems 20 (02), 317-340 | 193. | BV Joshi, B Vipin, J Ramkumar, RK Amit | 2021 | Impact of policy instruments on lead-acid battery recycling: A system dynamics approach | Resources, Conservation and Recycling 169, 105528 | 194. | A Tyagi, YK Penke, P Sinha, I Malik, KK Kar, J Ramkumar, H Yokoi | 2021 | ORR performance evaluation of Al-substituted MnFe2O4/reduced graphene oxide nanocomposite | International Journal of Hydrogen Energy 46 (43), 22434-22445 | 195. | I Singh, SM George, A Tiwari, J Ramkumar, K Balani | 2021 | Influence of laser surface texturing on the wettability and antibacterial properties of metallic, ceramic, and polymeric surfaces | Journal of Materials Research 36 (19), 3985-3999 1 | 196. | VK Jain, DS Patel, J Ramkumar, B Bhattacharyya, B Doloi, BR Sarkar | 2021 | Micro-machining: An overview (Part II) | Journal of Micromanufacturing, 25165984211045244 | 197. | A Bhardwaj, G Singh, KV Srivastava, J Ramkumar, SA Ramakrishna | 2021 | Polarization Insensitive Optically Transparent Microwave Metamaterial Absorber using Complementary Layer | IEEE Antennas and Wireless Propagation Letters | 198. | M Singh, VK Jain, J Ramkumar | 2021 | Micro-texturing on flat and cylindrical surfaces using electric discharge micromachining | Journal of Micromanufacturing 4 (2), 127-137 2 | 199. | G Singh, A Bhardwaj, KV Srivastava, J Ramkumar, SA Ramakrishna | 2021 | Perforated lightweight microwave metamaterial broadband absorber with discontinuous ground plane | Applied Physics A 127 (11), 1-9 | 200. | KS Srin, J Ramkumar, R Bathe | 2021 | Design and developmental approach aimed at polar solvent chemical sensor for biomedical application | Materials Today: Proceedings | 201. | KK Tomar, NV Srinath, J Ramkumar, SN Singh | 2021 | Level-one house agent-based decentralized resilient energy management | Electrical Engineering 103 (6), 3075-3083 | 202. | A Rajput, J Ramkumar, K Mondal | 2021 | Cavitation behavior of various microstructures made from a C-Mn eutectoid steel | Wear 486, 204056 1 | 203. | A Rajput, J Ramkumar, K Mondal | 2022 | Cavitation Resistance of a Cr-Mn Stainless Steel, A Mild Steel, and A High-Carbon Steel Based on Rust Protectivity and Corrosion Behavior | Journal of Materials Engineering and Performance 31 (1), 439-447 | 204. | V Mandal, S Sharma, SS Singh, J Ramkumar | 2022 | Laser Surface Texturing in Powder Bed Fusion: Numerical Simulation and Experimental Characterization | Metals and Materials International 28 (1), 181-196 1 | 205. | SK Singh, YK Penke, J Ramkumar, MJ Akhtar, KK Kar | 2022 | Facile synthesis of Al substituted Cu-Ferrite infused Reduced Graphene Oxide (rGO) nanohybrid for improving microwave absorption at gigahertz frequencies | Journal of Alloys and Compounds, 163659 | 206. | NK Gupta, G Singh, H Wanare, SA Ramakrishna, KV Srivastava, Ramkumar J | 2022 | A low-profile consolidated metastructure for multispectral signature management | International Journal of Heat and Technology 39 (1), 170-178 | 207. | A Rajput, J Ramkumar, K Mondal | 2022 | Effect of addition of strong oxidizer and temperature on the cavitation erosion resistance of different microstructures made from a high carbon steel | Wear, 204245 | 208. | RS Niranjan, O Singh, J Ramkumar | 2022 | Numerical study on thermal analysis of square micro pin fins under forced convection | Heat and Mass Transfer 58(2), 263-281 | 209. | S Gowthaman, P Tripathi, S Ariharan, J Ramkumar, K Balani | 2022 | Water attenuation enhances tribological damage resistance in laser peened steel | IMaterials Letters 308, 131175 | 210. | A Rajput, J Ramkumar, K Mondal | 2022 | Effect of Vibratory Tip Amplitude on the Erosion Rate of Various Microstructures of High Carbon Steel | Journal of Materials Engineering and Performance, 1-15 | 211. | V Mandal, P Tripathi, A Kumar, SS Singh, J Ramkumar | 2022 | A study on selective laser melting (SLM) of TiC and B4C reinforced IN718 metal matrix composites (MMCs) | Journal of Alloys and Compounds 901, 163527 | 212. | V Sharma, P Gupta, J Ramkumar | 2021 | Analysis of circuit current in electrochemical micromachining process under the application of different waveforms of pulsed voltage | Journal of Manufacturing Processes 75, 110-124 | 213. | Singh G, Mishra D, Ramkumar J, Anantha Ramakrishna S. | 2022 | Large area fabrication of single micron features using two-photon polymerization with sub-nanosecond laser | Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacturing | 214. | KS Srin, J Ramkumar, R Bathe | 2022 | Material Selection for Ultrashort Pulsed Laser Textured Self-Cleaning Surfaces | Journal of The Institution of Engineers (India): Series C, 1-7 | 215. | Mahavir Singh,Pragya Tripathi &Janakarajan Ramkumar | 2022 | Electrical discharge micro-texturing using compound tool electrodes for tribological and wettability applications | International Journal of Heat and Technology 39 (1), 170-178 | 216. | S Onkar, J Ramkumar | 2022 | Thermo-Hydraulic Performance of Square Micro Pin Fins under Forced Convection | Surface Engineering doi: 10.1080/02670844.2022.2089801 | 217. | Yaswanth K Penke, Prem Anand Murugan, Sarvana Matheshwaran, Janakarajan Ramkumar, Kamal K. Kar | 2022 | Anti-bacterial and arsenic remediation insights in aqueous systems onto heterogeneous metal oxide (Cu0.52Al0.1Fe0.47O4)/Rgo hybrid: an approach towards airborne microbial degradation | Environmental Science and Pollutions Research doi:10.1007/s11356-022-22169-8 | 218. | Mahavir Singh, J Ramkumar, V.K. Jain | 2022 | 3-D fabrication using electrical discharge-milling: an overview | Materials & Manufacturing Processes |