Ph.D Students at Present
S.No. | Name & Email Id | Tentative Thesis Title | Photograph |
---|---|---|---|
1. | Bibekananda Padhi | Micro-texturing using Electric Discharge Machining |
|
2. | Abhishek Verma | An Assistive Technology Intervention and Rehabilitation study for People with Locomotor Disability |
|
3. | Jyoti Yadav jyoti@iitk.ac.in, jyotiyadav403@gmail.com |
Design of metamaterial absorbers, 3D printed Microwave absorbers |
|
4. | Siddhant Shrivastava siddshri@iitk.ac.in |
Product Design. Biomedical Products, Frugal Innovation, CAD, Design Methodologies |
|
5. | Bharat Bhushan bharatb@iitk.ac.in |
Hybrid conformable Incremental sheet metal forming process |
|
6. | Prasenjit Sharma prasenj@iitk.ac.in |
Machinability of Ti-6Al-4v |
|
7. | Gopal Gupta gopala@iitk.ac.in |
Design of air pollution control smog tower |
|
8. | Md Haseen Akhtarmdhaseendw20@iitk.ac.in |
Design, development and deployment of a cost-effective mobile Primary Health Center (mPHC) for low-resource settings |
|
9. | Rajkumar rajkum@iitk.ac.in |
Laser Micromachining and 3D Printing |
|
10. | Rohit Kumar rohitkumar20@iitk.ac.in |
Designing Mobility and Rehabilitation Devices for ICU Patients |
|
11. | Naisarg Sagathiya naisarghs20@iitk.ac.in |
Numerical and experimental study of electrochemical turning process |
|
12. | Sushil Kumar skumar20@iitk.ac.in |
Insitu roughness characterisation in plasma electrolytic polishing |
|
13. | Moloy Sarkar moloys21@iitk.ac.in |
Laser Assisted Additive Manufacturing of Exotic Materials |
|
14. | Abhinav Sharma abhinavs22@iitk.ac.in |
Biomedical Robotics and Signal Processing |
|
15. | Rahul Sagwal rahuls22@iitk.ac.in |
Novel optimization criteria for amalgamation of EV operations through design, behavioral insights and deep learning |
|
16. | Sumit Gusain sumitg22@iitk.ac.in |
Hybrid manufacturing process |
|
Former Ph.D Students
S.No. | Name | Thesis Title | Year |
---|---|---|---|
1. | Karthikeyan. G. | Micro Electric Discharge Miliing (Mirco-EDM) | 2011 |
2. | Ravi Sankar. M | Abrasive Flow Machining (AFM) | 2011 |
3. | A.K. Singhal | Investigation into Mechanical Behavior of FRP Joining of Pipes | 2013 |
4. | Kanmani Subbu. S | Micro Electric Discharge Machining (Mirco-EDM) | 2014 |
5. | T.V. K. Gupta | In Process monitoring Abrassive water jet Milling | 2014 |
6. | Akhtar, Syed Nadeem | Micro texturing of surface using excimer laser | 2015 |
7. | Amandeep Singh | Developing indices for green manufacturing systems | 2017 |
8. | Yaswanth Kumar Penke | Arsenic Remediation, Mitigation and Surface Complexation Study onto Ni,Co, Cu, and Mn Based Ternary Metal Oxide Adsorbents (M-Al-Fe) | 2018 |
9. | Leeladhar Nagdeve | Theoretical & Experimental Investigations in Nano-finishing of freeform/Sculptured Surfaces | 2018 |
10. | Bisheswar Choudhury | Estimation of throttle and platform servo controls using artificial neural network for a powered parafoil unmanned aerial vehicle | 2019 |
11. | Divyansh Patel | Large area micro-texturing for flat, curved and free-form metal surfaces using electrochemical micromachining | 2020 |
12. | Pragya Tripathi | Role of Ceramic and Carbonaceous Reinforcements on Mechanical, Tribological and Anticorrosive Properties of Electrodeposited Cr-based Coatings | 2020 |
13. | Gaganpreet Singh | Development of machining techniques for fabrication of large area metamaterial absorbers | 2020 |
14. | Ajay BS Vardhaman | Tribological Performance and Characterization of Individual and Hybrid Nanomaterials as Lubricant Additives in SAE Automotive and Biodegradable Lubricants | 2021 |
15. | Krishna Kumar Singh Tomar | Decentralized Active Power Management And Control Of A Microgrid Using Multi-Agent Based Approach | 2021 |
16. | Vyom Sharma | A Study on the Process Fundamentals and Improvements in Wire Electrochemical Micromachining & its Application in Large Surface Area Texturing | 2021 |
17. | Mahavir Singh | Fundamental Insights into the Electrical Discharge Micromachining Process for Performance Enhancement | 2021 |
18. | Arun Rajput | Effect of composition and microstructures on the cavitation behavior of steels | 2021 |
19. | S Kiran Kumar | Shape dependent electrochemical performance of Co-doped olivine phosphate (nano-sheet-, sphere-, plate and micro-brick-, leaf-, and cauliflower-like particles) for secondary, thin, and flexible Li-ion battery applications | 2022 |
20. | Amarjit Prakashrao Ken | Experimental Investigation and Modeling of tool heath monitoring system using multiple sensor data-fusion approaches in turning of hardened steel | 2022 |
21. | Kajal Chaudhary | Flexible Dielectric and Composite Materials for Microwave Metamaterial Applications | 2022 |
22. | Ramendra Singh Niranjan | Fabrication and surface characterization of Micro-Channels | 2022 |
23. | Shashank Sharma | Mathematical modelling of Laser matter interaction | 2023 |
24. | Tesfaye Girma | Bio-Machining | 2023 |
25. | Vijay Mandal | Surface Modification through Laser Processing | 2023 |
26. | Pragya Shukla | Surface Engineering | 2023 |
27. | Shania Zehra Naqvi | Polymer Composites | 2024 |