Dr. Nilesh Prakash Gurao
Professor

Publications
List of publications in International Journals

Please check my profile ResearcherID: C-6797-2011, Google Scholar and Scopus profile for my latest publications.


Journal publications (127)

  1. Mahato S., Gurao N.P., Biswas K., Accelerated prediction of stacking fault energy in FCC medium entropy alloys using multilayer perceptron neural networks: correlation and feature analysis, (2024) Modelling and Simulation in Materials Science and Engineering, 32 (3), art. no. 035021
  2. Mahato S., Chandrakar S., Biswas K., Gurao N.P., An experimental and crystal plasticity simulation study on kink band-assisted grain fragmentation during high-pressure torsion of (CrFeNi)99Si1 medium-entropy alloy, (2024) Journal of Materials Science, 59(14), pp. 6075-6096
  3. Jha, S.R., Ardham, S., Tennyson, G., Gurao, N.P., Biswas, K., An experimental and computational framework to investigate the thermal cycling approach for strengthening low SFE FeMnNi medium entropy alloy, (2023) Materialia , 32, 101937
  4. Jain R., Yadava M., Tripathi A., Gurao N.P., Rate controlling deformation mechanisms in SS316L stainless steel manufactured using laser powder bed fusion technique, (2023) International Journal of Plasticity, 171, art. no. 103787
  5. Sonkusare R., Gurao N.P., Biswas K., Basu J., Sen S., Pradeep K.G., Praveena M., Bhowmick S., Bhowmick S., Kilmametov A., Palit M., Micro-mechanisms of deformation and strengthening during high pressure torsion of CoCuFeMnNi high entropy alloy, (2023) Materialia, 32, art. no. 101916
  6. Jha S.R., Ardham S., Tennyson G., Gurao N.P., Biswas K., An experimental and computational framework to investigate the thermal cycling approach for strengthening low SFE FeMnNi medium entropy alloy, (2023) Materialia, 32, art. no. 101937
  7. Jain, R., Kumar, M., Biswas, K., Gurao, N.P., Deformation behaviour of the silicon doped metastable Fe50-xMn30Co10Cr10Six complex concentrated alloy using experiments and crystal plasticity simulations, (2023) Materials Science and Engineering: A, 885, art. no. 145620.
  8. Bandyopadhyay, S., Panwar, V., Guin, S., Anoop, C.R., Gurao, N.P., Mukherjee, R., Multivariant microstructure evolution in Ti-alloys: insights from a quantitative phase-field study, (2023) Modelling and Simulation in Materials Science and Engineering, 31 (6), art. no. 065019.
  9. Sahu, V.K., Yadava, M., Gurao, N.P., Elucidating the extreme anisotropy in the J-integral value of commercially pure titanium, (2023) Materials Science and Engineering: A, 881, art. no. 145434.
  10. Jain, R., Parameswaran, V., Biswas, K., Gurao, N.P., Bidirectional transformation enabled improvement in strength and ductility of metastable Fe50Mn30Co10Cr10 complex concentrated alloy under dynamic deformation, (2023) International Journal of Plasticity, 166, art. no. 103633.
  11. Kumar, B.S.B., Yadav, D.K., Jain, R., Gupta, N., Gurao, N.P., Sinha, N., Effect of Build and Scan Direction on Tensile Properties of Selective Laser Melted SS316L Alloy, (2023) Lasers in Manufacturing and Materials Processing, 10 (2), pp. 330-352.
  12. Kumar, J., Linda, A., Sadhasivam, M., Pradeep, K.G., Gurao, N.P., Biswas, K., The effect of Si addition on the structure and mechanical properties of equiatomic CoCrFeMnNi high entropy alloy by experiment and simulation, (2023) Materialia, 27, art. no. 101707.
  13. Bahadur, F., Kumar, J., Gururaj, K., Yadav, M.K., Tan, S., Pradeep, K.G., Gurao, N.P., Biswas, K., Room temperature cyclic creep behaviour of equimolar CoCuFeMnNi high entropy alloy, (2023) Materials Science and Engineering: A, 865, art. no. 144587.
  14. Raturi, A., Chawake, N., Biswas, K., Gurao, N.P., Heterogeneous microstructure in nonequiatomic MoNbTaVW refractory high entropy alloy after high pressure torsion: Evolution mechanisms and mechanical properties, (2023) Materials Science and Engineering: A, 864, art. no. 144530.
  15. Chakrabarty, A., Chakraborty, P., Jain, R., Sahu, V.K., Gurao, N.P., Bar, H.N., Khutia, N., Influence of Scanning and Building Strategies on the Deformation Behavior of Additively Manufactured AlSi10Mg: CPFEM and Finite Element Studies, (2023) Metals and Materials International.
  16. Nagarajan, S., Jain, R., Jha, S., Sahu, V.K., Gurao, N.P., In-Situ Electron Backscatter Diffraction Study of Deformation Behavior of Fine-grained Dual Phase Steel Subjected to Uniaxial Tension, (2023) Journal of Materials Engineering and Performance.
  17. Sonkusare, R., Biswas, K., Gan, W., Brokmeier, H.G., Gurao, N.P., Texture Evolution During Hot Compression of CoCuFeMnNi Complex Concentrated Alloy Using Neutron Diffraction and Crystal Plasticity Simulations, (2022) Transactions of the Indian Institute of Metals, 75 (12), pp. 3061-3066.
  18. Kumar, J., Linda, A., Sadhasivam, M., Pradeep, K.G., Gurao, N.P., Biswas, K. The effect of Al addition on solid solution strengthening in CoCrFeMnNi: Experiment and modelling, (2022) Acta Materialia, 238, art. no. 118208.
  19. Bahadur, F., Sadhasivam, M., Pradeep, K.G., Gurao, N.P., Biswas, K., Ratcheting behavior of non-equiatomic TRIP dual-phase high entropy alloy, (2022) Materialia, 24, art. no. 101512.
  20. Sahu, V.K., Yadava, M., Chakraborty, P., Gurao, N.P., Effect of notch severity and crystallographic texture on local deformation and damage in commercially pure titanium, (2022) International Journal of Plasticity, 155, art. no. 103318.
  21. Mohanty, S., Kothari, A., Raghavan, R., Sahu, V.K., Gurao, N.P., Sahu, K.K., Dhindaw, B.K., Zeng, L., Xia, M., Gollapudi, S., Microstructure and Mechanical Properties of High-Carbon-Containing Fe-Ni-Mn-Al-Cr High-Entropy Alloy: Effect of Thermomechanical Treatment, (2022) Frontiers in Materials, 9, art. no. 915278.
  22. Kumar, M., Gurao, N.P., Upadhyaya, A., Implications of slip transition on the work hardening and texture evolution of nickel tungsten iron ternary alloy, (2022) Materials Characterization, 189, art. no. 112010.
  23. Kumar, J., Jha, S., Raturi, A., Bajpai, A., Sonkusare, R., Gurao, N.P., Biswas, K., Novel Alloy Design Concepts Enabling Enhanced Mechanical Properties of High Entropy Alloys, (2022) Frontiers in Materials, 9, art. no. 868721.
  24. Kumar, M., Gurao, N.P., Upadhyaya, A., Evolution of microstructure and crystallographic texture during cold rolling of liquid phase sintered tungsten heavy alloy, (2022) International Journal of Refractory Metals and Hard Materials, 105, art. no. 105849.
  25. Jain, R., Yadava, M., Nayan, N., Gurao, N.P., Combinatorial synchrotron diffraction-constitutive modelling-crystal plasticity simulation framework for direct metal laser sintered AlSi10Mg alloy, (2022) Materialia, 22, art. no. 101395.
  26. Kumar, M., Gurao, N.P., Upadhyaya, A. Effect of Tungsten Content and Compression on Microstructure and Texture Evolution in Liquid Phase Sintered Heavy Alloy (2022) Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 53 (4), pp. 1253-1266.
  27. Raturi, A., Biswas, K., Gurao, N.P., Elastic and plastic anisotropy in a refractory high entropy alloy utilizing combinatorial instrumented indentation and electron backscatter diffraction, (2022) Journal of Alloys and Compounds, 896, art. no. 162902.
  28. Bahadur, F., Jain, R., Biswas, K., Gurao, N.P., Low cycle fatigue behaviour of non-equiatomic TRIP dual-phase Fe50Mn30Co10Cr10 high entropy alloy, (2022) International Journal of Fatigue, 155, art. no. 106545.
  29. Ghosh, A., Sahu, V.K., Gurao, N.P., Effect of heat treatment on the ratcheting behaviour of additively manufactured and thermo-mechanically treated Ti-6Al-4V alloy, (2022) Materials Science and Engineering: A, 833, art. no. 142345.
  30. Ghosh, A., Jain, R., Brokmeier, H.-G., Gurao, N.P., Microstructure-texture-micro-strain evolution during tensile deformation of α+β titanium alloy using in-situ Synchrotron X-ray diffraction and CPFEM simulation, (2022) Journal of Physics: Conference Series, 2380 (1), art. no. 012137.
  31. Biswas, K., Gurao, N.P., Maiti, T., Mishra, R.S., Phase and Microstructural Selection in High Entropy Materials, (2022) Materials Horizons: From Nature to Nanomaterials, pp. 47-82.
  32. Biswas, K., Gurao, N.P., Maiti, T., Mishra, R.S. Synthesis and Processing of Bulk High Entropy Materials, (2022) Materials Horizons: From Nature to Nanomaterials, pp. 123-176.
  33. Biswas, K., Gurao, N.P., Maiti, T., Mishra, R.S., Application of Artificial Intelligence in the Design of HEMs, (2022) Materials Horizons: From Nature to Nanomaterials, pp. 99-121.
  34. Biswas, K., Gurao, N.P., Maiti, T., Mishra, R.S., Preface, (2022) Materials Horizons: From Nature to Nanomaterials, pp. ix-xi.
  35. Biswas, K., Gurao, N.P., Maiti, T., Mishra, R.S., Structural Properties, (2022) Materials Horizons: From Nature to Nanomaterials, pp. 195-257.
  36. Biswas, K., Gurao, N.P., Maiti, T., Mishra, R.S. Summary and Future Direction (2022) Materials Horizons: From Nature to Nanomaterials, pp. 289-307.
  37. Biswas, K., Gurao, N.P., Maiti, T., Mishra, R.S. High Entropy Materials (HEMs): An Overview, (2022) Materials Horizons: From Nature to Nanomaterials, pp. 1-25.
  38. Biswas, K., Gurao, N.P., Maiti, T., Mishra, R.S. Synthesis and Processing of HEA Coating and Thin Films (2022) Materials Horizons: From Nature to Nanomaterials, pp. 177-193.
  39. Biswas, K., Gurao, N.P., Maiti, T., Mishra, R.S. Functional Applications of High Entropy Alloys, (2022) Materials Horizons: From Nature to Nanomaterials, pp. 259-287.
  40. Biswas, K., Gurao, N.P., Maiti, T., Mishra, R.S. High Entropy Materials: Basic Concepts (2022) Materials Horizons: From Nature to Nanomaterials, pp. 27-46.
  41. Biswas, K., Gurao, N.P., Maiti, T., Mishra, R.S. Diffusion in High Entropy Materials, (2022) Materials Horizons: From Nature to Nanomaterials, pp. 83-98.
  42. Bajpai, A., Bhatt, J., Gurao, N.P., Biswas, K. A new approach to design multicomponent metallic glasses using the mendeleev number (2022) Philosophical Magazine, 102 (24), pp. 2554-2571.
  43. Bajpai, A., Bhatt, J., Gurao, N.P., Biswas, K. Accelerated design of multicomponent metallic glasses using machine learning, (2022) Journal of Materials Research.
  44. Sahu, V.K., Sonkusare, R., Biswas, K., Gurao, N.P., In Situ Experiments: Paving Ways for Rapid Development of Structural Metallic Materials for a Sustainable Future, (2022) Journal of the Indian Institute of Science, 102 (1), pp. 173-210.
  45. Chakrabarty, A., Chakraborty, P., Sahu, V.K., Gurao, N.P., Khutia, N. Investigation of Strain Localization in Additively Manufactured AlSi10Mg Using CPFEM (2022) Lecture Notes in Mechanical Engineering, pp. 199-214.
  46. Chakrabarty, A., Sahu, V.K., Das, A., Mukherjee, S., Gurao, N.P., Chakraborty, P., Bar, H.N., Khutia, N. Study of the Effect of Two Separate Tilt Angles of Laser Scanning Lines on the Microstructure and Mechanical Properties in Direct Metal Laser Sintered AlSi10Mg Alloy, (2022) Metals and Materials International, 28 (1), pp. 250-268.
  47. Akhil, B., Bajpai, A., Gurao, N.P., Biswas, K. Designing hexagonal close packed high entropy alloys using machine learning, (2021) Modelling and Simulation in Materials Science and Engineering, 29 (8), art. no. 085005.
  48. Jha, S.R., Biswas, K., Gurao, N.P., Achieving high strength and ductility in equimolar FeMnNi medium entropy alloy by tuning microstructural entropy, (2021) Materials Science and Engineering: A, 826, art. no. 141965.
  49. Nagarajan, S., Jain, R., Gurao, N.P., Microstructural characteristics governing the lattice rotation in Al-Mg alloy using in-situ EBSD, (2021) Materials Characterization, 180, art. no. 111405.
  50. Raturi, A., Biswas, K., Gurao, N.P., A mechanistic perspective on the kinetics of plastic deformation in FCC High Entropy Alloys: Effect of strain, strain rate and temperature, (2021) Scripta Materialia, 197, art. no. 113809.
  51. Nayan, N., Gurao, N.P., Murty, S.V.S.N., Venkitakrishanan, P.V. Plane Strain Compression of Nb-10Hf-1Ti alloy: Effect on Microstructure and Micro-Texture, (2021) Transactions of the Indian Institute of Metals, 74 (4), pp. 957-968.
  52. Sinha, S., Sahu, V.K., Beura, V., Sonkusare, R., Kalsar, R., Das, A.K.L., Basu, J., Gurao, N.P., Biswas, K. Initial texture dependence of nanocrystalline omega phase formation during high pressure torsion of commercially pure titanium, (2021) Materials Science and Engineering: A, 802, art. no. 140687.
  53. Manda, S., Mishra, S., Gurao, N.P., Effect of cyclic prestrain on tensile behavior of commercially pure copper, (2021) Materials Performance and Characterization, 10 (1), pp. 370-381.
  54. Sahu, V.K., Gupta, S., Gurao, N.P., Effect of Initial Texture on the Evolution of Microstructure and Texture During Rolling of Commercially Pure Titanium at Room and Cryogenic Temperature, (2020) Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 51 (11), pp. 5848-5860.
  55. Bajpai, A., Bhatt, J., Biswas, K., Gurao, N.P., A new perspective to thermodynamical designing of high entropy bulk metallic glasses (HE-BMGs), (2020) Physica B: Condensed Matter, 595, art. no. 412350.
  56. Aggarwal, A., Chouhan, A., Patel, S., Yadav, D.K., Kumar, A., Vinod, A.R., Prashanth, K.G., Gurao, N.P., Role of impinging powder particles on melt pool hydrodynamics, thermal behaviour and microstructure in laser-assisted DED process: A particle-scale DEM - CFD - CA approach, (2020) International Journal of Heat and Mass Transfer, 158, art. no. 119989.
  57. Gurao, N.P., Biswas, K. High-entropy materials: Critical review and way forward, (2020) Current Science, 118 (10), pp. 1520-1539.
  58. Sonkusare, R., Jain, R., Biswas, K., Parameswaran, V., Gurao, N.P., High strain rate compression behaviour of single phase CoCuFeMnNi high entropy alloy, (2020) Journal of Alloys and Compounds, 823, art. no. 153763.
  59. Nagarajan, S., Gurao, N.P., Parameswaran, V. On the kinetics of texture development in Al-Mg alloy under high strain rate tension, (2020) Materials Characterization, 163, art. no. 110303.
  60. Sonkusare, R., Biswas, K., Al-Hamdany, N., Brokmeier, H.G., Kalsar, R., Schell, N., Gurao, N.P., A critical evaluation of microstructure-texture-mechanical behavior heterogeneity in high pressure torsion processed CoCuFeMnNi high entropy alloy, (2020) Materials Science and Engineering: A, 782, art. no. 139187.
  61. Nayan, N., Yadava, M., Gurao, N.P., Murty, S.V.S.N., Mahesh, S., Prasad, M.J.N.V., Samajdar, I. Sub-zero Temperature Dependence of Tensile Response of Friction Stir Welded Al-Cu-Li (AA2198) Alloy, (2020) Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 51 (3), pp. 1173-1182.
  62. Nayan, N., Yadava, M., Sarkar, R., Murty, S.V.S.N., Gurao, N.P., Mahesh, S., Prasad, M.J.N.V., Samajdar, I. Microstructure and tensile response of friction stir welded Al-Cu-Li (AA2198-T8) alloy, (2020) Materials Characterization, 159, art. no. 110002.
  63. Krishna, M.V., Sahu, V.K., Ghosh, A., Brokmeier, H.-G., Gurao, N.P., In-situ investigation of the evolution of microstructure and texture during load reversal of commercially pure titanium using synchrotron X-ray diffraction, (2020) Materials Characterization, 159, art. no. 110039.
  64. Bahadur, F., Biswas, K., Gurao, N.P., Micro-mechanisms of microstructural damage due to low cycle fatigue in CoCuFeMnNi high entropy alloy, (2020) International Journal of Fatigue, 130, art. no. 105258.
  65. Felege, G.N., Gurao, N.P., Upadhyaya, A. Microstructure, microtexture and grain boundary character evolution in microwave sintered copper, (2019) Materials Characterization, 157, art. no. 109921.
  66. Mishra S., Yadava M., Kulkarni K. N., Gurao N. P., A New Phenomenological Approach for Modeling Strain Hardening Behavior of Face Centered Cubic Materials, (2019) Acta Materialia, 178, pp. 99-113
  67. Raturi, A., Aditya C, J., Gurao N.P., Biswas, K., ICME approach to explore equiatomic and non-equiatomic single phase BCC refractory high entropy alloys, (2019) Journal of Alloys and Compounds, 806, pp. 587-595.
  68. Ghosh, A., Brokmeier, H.-G., Gurao N.P., Orientation-dependent deformation micro-mechanism and failure analysis of SS 316 under tensile and cyclic load, (2019) International Journal of Fatigue, 125, pp. 35-46.
  69. Sonkusare, R., Swain, A., Rahul, M.R., Samal, S., Gurao N.P., Biswas, K., Singh, S.S., Nayan, N., Establishing processing-microstructure-property paradigm in complex concentrated equiatomic CoCuFeMnNi alloy, (2019) Materials Science and Engineering A, 759, pp. 415-429.
  70. Sonkusare, R., Khandelwal, N., Ghosh, P., Biswas, K., Gurao N.P., A comparative study on the evolution of microstructure and hardness during monotonic and cyclic high pressure torsion of CoCuFeMnNi high entropy alloy, (2019) Journal of Materials Research, 34 (5), pp. 732-743.
  71. Felege, G.N., Gurao, N.P., Upadhyaya, A., Evolution of Microtexture and Microstructure During Sintering of Copper, (2019) Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science.
  72. Agarwal, R., Sonkusare, R., Jha, S.R., Gurao, N.P., Biswas, K., Nayan, N., Understanding the deformation behavior of CoCuFeMnNi high entropy alloy by investigating mechanical properties of binary ternary and quaternary alloy subsets, (2018) Materials and Design, 157, pp. 539-550.
  73. Kumar, J., Kumar, N., Das, S., Gurao, N.P., Biswas, K., Effect of Al Addition on the Microstructural Evolution of Equiatomic CoCrFeMnNi Alloy, (2018) Transactions of the Indian Institute of Metals, 71 (11), pp. 2749-2758.
  74. Mishra, S., Yadava, M., Kulkarni, K.N., Gurao, N.P., Stress relaxation behavior of an aluminium magnesium silicon alloy in different temper condition, (2018) Mechanics of Materials, 125, pp. 80-93.
  75. Ghassemali, E., Sonkusare, R., Biswas, K., Gurao, N.P., Dynamic precipitation at elevated temperatures in a dual-phase AlCoCrFeNi high-entropy alloy: an in situ study, (2018) Philosophical Magazine Letters, 98 (9), pp. 400-409.
  76. Mishra, S., Yadava, M., Kulkarni, K.N., Gurao, N.P., A theoretical investigation of the effect of precipitate habit plane on plastic anisotropy in age hardenable aluminium alloys, (2018) Modelling and Simulation in Materials Science and Engineering, 26 (5), art. no. 055011, .
  77. Ghosh, A., Brokmeier, H.-G., Al-Hamdany, N., Sinha, S., Schell, N., Gurao, N.P., A synchrotron X-ray and electron backscatter diffraction based investigation on deformation and failure micro-mechanisms of monotonic and cyclic loading in titanium, (2018) Materials Science and Engineering A, 726, pp. 143-153.
  78. Sonkusare, R., Divya Janani, P., Gurao, N.P., Sarkar, S., Sen, S., Pradeep, K.G., Biswas, K., Phase equilibria in equiatomic CoCuFeMnNi high entropy alloy, (2018) Materials Chemistry and Physics, 210, pp. 269-278.
  79. Sinha, S., Gurao, N.P., In-Plane Anisotropy in Mechanical Behavior and Microstructural Evolution of Commercially Pure Titanium in Tensile and Cyclic Loading, (2017) Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 48 (12), pp. 5813-5832.
  80. Ghassemali, E., Sonkusare, R., Biswas, K., Gurao, N.P., In-situ study of crack initiation and propagation in a dual phase AlCoCrFeNi high entropy alloy, (2017) Journal of Alloys and Compounds, 710, pp. 539-546.
  81. Mohanty, S., Gurao, N.P., Padaikathan, P., Biswas, K., Ageing behaviour of equiatomic consolidated AlCoCuNiZn high entropy alloy, (2017) Materials Characterization, 129, pp. 127-134.
  82. Mishra, S., Yadava, M., Kulkarni, K., Gurao, N.P., A modified Taylor model for predicting yield strength anisotropy in age hardenable aluminium alloys, (2017) Materials Science and Engineering A, 699, pp. 217-228.
  83. Sinha, S., Gurao, N.P., The role of crystallographic texture on load reversal and low cycle fatigue performance of commercially pure titanium (2017) Materials Science and Engineering A, 691, pp. 100-109.
  84. Sinha, S., Pukenas, A., Ghosh, A., Singh, A., Skrotzki, W., Gurao, N.P., Effect of initial orientation on twinning in commercially pure titanium, (2017) Philosophical Magazine, 97 (10), pp. 775-797.
  85. Tazuddin, Gurao, N.P., Biswas, K., In the quest of single phase multi-component multiprincipal high entropy alloys, (2017) Journal of Alloys and Compounds, 697, pp. 434-442.
  86. Ghosh, A., Singh, A., Gurao, N.P., Effect of rolling mode and annealing temperature on microstructure and texture of commercially pure-titanium, (2017) Materials Characterization, 125, pp. 83-93.
  87. Ghosh, A., Gurao, N.P., Effect of crystallographic texture on ratcheting response of commercially pure titanium, (2017) Materials and Design, 115, pp. 121-132.
  88. Gurao, N.P., Suwas, S., Effect of Phase Contiguity and Morphology on the Evolution of Deformation Texture in Two-Phase Alloys, (2017) Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 48 (2), pp. 809-827.
  89. Mohanty, S., Maity, T.N., Mukhopadhyay, S., Sarkar, S., Gurao, N.P., Bhowmick, S., Biswas, K., Powder metallurgical processing of equiatomicAlCoCrFeNi high entropy alloy: Microstructure and mechanical properties, (2017) Materials Science and Engineering A, 679, pp. 299-313.
  90. Ghosh, A., Gurao, N.P., Effect of crystallographic texture on the planar anisotropy of ratcheting response in 316 stainless steel sheet, (2016) Materials and Design, 109, pp. 186-196.
  91. Sinha, S., Ghosh, A., Gurao, N.P., Effect of initial orientation on the tensile properties of commercially pure titanium, (2016) Philosophical Magazine, 96 (15), pp. 1485-1508.
  92. Sinha, S., Gurao, N.P., In situ electron backscatter diffraction study of twinning in commercially pure titanium during tension-compression deformation and annealing, (2016) Materials and Design, 116, pp. 686-693.
  93. Tazuddin, Biswas, K., Gurao, N.P., Deciphering micro-mechanisms of plastic deformation in a novel single phase fcc-based MnFeCoNiCu high entropy alloy using crystallographic texture, (2016) Materials Science and Engineering A, 657, pp. 224-233.
  94. Mishra, S., Kulkarni, K., Gurao, N.P., Effect of crystallographic texture on precipitation induced anisotropy in an aluminium magnesium silicon alloy, (2015) Materials and Design, 87, pp. 507-519.
  95. Nayan, N., Gurao, N.P., Narayana Murty, S.V.S., Jha, A.K., Pant, B., George, K.M., Microstructure and micro-texture evolution during large strain deformation of Inconel alloy IN718, (2015) Materials Characterization, 110, pp. 236-241.
  96. Ghosh, A., Adesola, A., Szpunar, J.A., Odeshi, A.G., Gurao, N.P., Effect of tempering conditions on dynamic deformation behaviour of an aluminium-lithium alloy, (2015) Materials and Design, 81, pp. 1-10.
  97. Sinha, S., Szpunar, J.A., Kiran Kumar, N.A.P., Gurao, N.P., Tensile deformation of 316L austenitic stainless steel using in-situ electron backscatter diffraction and crystal plasticity simulations, (2015) Materials Science and Engineering A, 637, pp. 48-55.
  98. Song, M., Gurao, N.P., Qin, W., Szpunar, J.A., Guan, K.S., Deciphering deviation in mechanical properties of differently processed AISI 316L austenitic stainless steel using the small punch test, (2015) Materials Science and Engineering A, 628, pp. 116-123.
  99. Nayan, N., Gurao, N.P., Narayana Murty, S.V.S., Jha, A.K., Pant, B., Sharma, S.C., George, K.M., Microstructure and micro-texture evolution during large strain deformation of an aluminium-copper-lithium alloy AA 2195, (2015) Materials and Design, 65, pp. 862-868.
  100. Mohanty, S., Samal, S., Tazuddin, A., Tiwary, C.S., Gurao, N.P., Biswas, K., Effect of processing route on phase stability in equiatomic multicomponent Ti20Fe20Ni20Co20Cu20 high entropy alloy, (2015) Materials Science and Technology (United Kingdom), 31 (10), pp. 1214-1222.
  101. Mohanty, S., Gurao, N.P., Biswas, K., Sinter ageing of equiatomic Al20Co20Cu20Zn20Ni20 high entropy alloy via mechanical alloying, (2014) Materials Science and Engineering A, 617, pp. 211-218.
  102. Gurao, N.P., Akhiani, H., Szpunar, J.A., Pilgering of Zircaloy-4: Experiments and simulations, (2014) Journal of Nuclear Materials, 453 (1-3), pp. 158-168.
  103. Gurao, N.P., Suwas, S., Generalized scaling of misorientation angle distributions at meso-scale in deformed materials, (2014) Scientific Reports, 4, art. no. 5641.
  104. Madhavan, R., Gurao, N.P., Suwas, S., Texture evolution during annealing of large-strain deformed nanocrystalline nickel, (2014) Philosophical Magazine Letters, 94 (3), pp. 141-149.
  105. Gurao, N.P., Manivasagam, G., Govindaraj, P., Asokamani, R., Suwas, S., Effect of texture and grain size on bio-corrosion response of ultrafine-grained titanium, (2013) Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 44 (12), pp. 5602-5610.
  106. Suresh, K.S., Gurao, N.P., Singh D., S., Suwas, S., Chattopadhyay, K., Zherebtsov, S.V., Salishchev, G.A., Effect of equal channel angular pressing on grain refinement and texture evolution in a biomedical alloy Ti13Nb13Zr, (2013) Materials Characterization, 82, pp. 73-85.
  107. Gurao, N.P., Adesola, A.O., Odeshi, A.G., Szpunar, J.A., On the evolution of heterogeneous microstructure and microtexture in impacted aluminum-lithium alloy, (2013) Journal of Alloys and Compounds, 578, pp. 183-187.
  108. Gurao, N.P., Kumar, P., Sarkar, A., Brokmeier, H.-G., Suwas, S., Simulation of deformation texture evolution during multi axial forging of interstitial free steel, (2013) Journal of Materials Engineering and Performance, 22 (4), pp. 1004-1009.
  109. Gurao, N.P., Suwas, S., Deformation behaviour at macro- and nano-length scales: The development of orientation gradients, (2013) Materials Letters, 99, pp. 81-85.
  110. Gurao, N.P., Sethuraman, S., Suwas, S., Evolution of texture and microstructure in commercially pure titanium with change in strain path during rolling, (2013) Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 44 (3), pp. 1497-1507.
  111. Gurao, N.P., Kapoor, R., Suwas, S., Texture evolution in high strain rate deformed Cu-10Zn alloy, (2012) Materials Science and Engineering A, 558, pp. 761-765.
  112. Gurao, N.P., Kumar, P., Bhattacharya, B., Haldar, A., Suwas, S., Evolution of crystallographic texture and microstructure during cold rolling of twinning-induced plasticity (TWIP) steel: Experiments and simulations, (2012) Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 43 (13), pp. 5193-5201.
  113. Kumar, P., Gurao, N.P., Haldar, A., Suwas, S., Texture and microstructural evolution in pearlitic steel during triaxial compression, (2012) Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 43 (6), pp. 2043-2055.
  114. Garg, R., Gurao, N.P., Ranganathan, S., Suwas, S., Evolution of texture and grain boundary microstructure in two-phase (α+β) brass during recrystallization, (2011) Philosophical Magazine, 91 (32), pp. 4089-4108.
  115. Gurao, N.P., Sethuraman, S., Suwas, S., Effect of strain path change on the evolution of texture and microstructure during rolling of copper and nickel, (2011) Materials Science and Engineering A, 528 (25-26), pp. 7739-7750.
  116. Kumar, P., Gurao, N.P., Haldar, A., Suwas, S., Progressive changes in the microstructure and texture in pearlitic steel during wire drawing, (2011) ISIJ International, 51 (4), pp. 679-684.
  117. Gurao, N.P., Kapoor, R., Suwas, S., Deformation behaviour of commercially pure titanium at extreme strain rates, (2011) Acta Materialia, 59 (9), pp. 3431-3446.
  118. Raju, K.S., Krishna, M.G., Padmanabhan, K.A., Sarma, V.S., Gurao, N.P., Wilde, G., Microstructure evolution and hardness variation during annealing of equal channel angular pressed ultra-fine grained nickel subjected to 12 passes, (2011) Journal of Materials Science, 46 (8), pp. 2662-2671.
  119. Gurao, N.P., Suwas, S., Evolution of crystallographic texture during deformation of submicron grain size titanium, (2011) Journal of Materials Research, 26 (4), pp. 523-532.
  120. Gurao, N.P., Suwas, S., Texture evolution and operative mechanisms during large-strain deformation of nanocrystalline nickel, (2011) Philosophical Magazine, 91 (5), pp. 798-817.
  121. Gurao, N.P., Kapoor, R., Suwas, S., Effect of strain rate on evolution of the deformation microstructure and texture in polycrystalline copper and nickel, (2010) Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 41 (11), pp. 2794-2804.
  122. Beausir, B., Fressengeas, C., Gurao, N.P., Tóth, L.S., Suwas, S., Spatial correlation in grain misorientation distribution, (2009) Acta Materialia, 57 (18), pp. 5382-5395.
  123. Gurao, N.P., Suwas, S., Deformation mechanisms during large strain deformation of nanocrystalline nickel, (2009) Applied Physics Letters, 94 (19), art. no. 191902,
  124. Gurao, N.P., Ali A, A., Suwas, S., Study of texture evolution in metastable β-Ti alloy as a function of strain path and its effect on a transformation texture, (2009) Materials Science and Engineering A, 504 (1-2), pp. 24-35.
  125. Raju, K.S., Krishna, M.G., Padmanabhan, K.A., Muraleedharan, K., Gurao, N.P., Wilde, G., Grain size and grain boundary character distribution in ultra-fine grained (ECAP) nickel, (2008) Materials Science and Engineering A, 491 (1-2), pp. 1-7.
  126. Viswanath, B., Raghavan, R., Gurao, N.P., Ramamurty, U., Ravishankar, N., Mechanical properties of tricalcium phosphate single crystals grown by molten salt synthesis, (2008) Acta Biomaterialia, 4 (5), pp. 1448-1454.
  127. Suwas, S., Gurao, N.P., Crystallographic texture in materials, (2008) Journal of the Indian Institute of Science, 88 (2), pp. 151-177.

Book Chapter (01)

  1. Suwas, S., Gurao, N.P., Development of Microstructures and Textures by Cross Rolling, (2014) Comprehensive Materials Processing, 3, pp. 81-106

Conference Proceedings (12)

  1. Patra, L., Mishra, S., Gurao, N.P., Effect of Strain Path Change on Deformation and Recrystallization Texture Evolution in Al-Mg Alloy, Proceedings of the 6th International Conference on Recrystallization and Grain Growth, Pittsburgh, USA (2016) pp. 231-238.
  2. Ghosh, A., Gurao, N.P., Evolution of deformation heterogeneity at multiple length scales in a strongly textured zinc layer on galvanized steel, (2015) IOP Conference Series: Materials Science and Engineering, 82 (1), art. no. 012024.
  3. Mishra, S., Kulkarni, K., Gurao, N.P., Effect of grain orientation on ageing behaviour of Al-Mg-Si alloy, (2015) Materials Science and Technology Conference and Exhibition 2015, MS and T 2015, 2, pp. 1575-1582.
  4. Mishra, S., Kulkarni, K., Gurao, N.P., Effect of strain path change on precipitation behaviour of Al-Cu-Mg-Si alloy, (2015) IOP Conference Series: Materials Science and Engineering, 82 (1), art. no. 012025.
  5. Gurao, N.P., Effect of crystallographic texture on formability of some FCC metals and alloys, (2014) SAE Technical Papers, 4.
  6. Mishra, S., Priyadarshi, P., Kulkarni, K., Gurao, N.P., Phale, P., Mulla, S., Optimizing the strength and ductility of Al-6061 alloy by various post-rolling ageing treatments, (2014) SAE Technical Papers, 4.
  7. Madhavan, R., Gurao, N.P., Suwas, S., Deformation and recrystallization texture evolution in nano-crystalline nickel, (2012) Materials Science Forum, 715-716, pp. 508-517.
  8. Gurao, N.P., Suwas, S., Deformation behaviour of titanium in torsion, (2012) Materials Science Forum, 702-703, pp. 826-829.
  9. Gurao, N., Suwas, S., Kapoor, R., Study of texture evolution at high strain rates in FCC materials, (2008) Ceramic Transactions, 201, pp. 73-81.
  10. Suwas, S., Gurao, N.P., Ali, A., Evolution of transformation texture in a metastable b-titanium alloy, (2008) Ceramic Transactions, 200, pp. 617-628.
  11. Niranjani, V.L., Gurao, N. P., Wendt, U., Suwas, S., SubramanyaSarma, V., Studies on texture and microstructure of cryorolled and annealed Cu-5%Al, Cu-5%Zn alloys, (2008) Ceramic Transactions, 201, pp. 529-536.
  12. Roy, S., Gurao, N., Suwas, S., Tamirisakandala, S., Srinivasan, R., Miracle, D.B., Texture evolution in boron modified.T1-6AL-4V alloy, (2008) Ceramic Transactions, 200, pp. 585-592.

Papers presented in conference but not published (08)

  1. Sinha, S. Ghosh A., Gurao, N.P., Effect of crystallographic texture on micro-mechanisms of deformation in monotonic and cyclic loading of titanium , (2017) 18th International Conference on Texture of Materials, Saint George, USA
  2. Sonkusare R., Kilmametov A., Palit M., Biswas K, Gurao, N.P., Evolution of microstructure texture and mechanical behaviour of CoCuFeMnNi high entropy alloy subjected to high pressure torsion, (2017) 18th International Conference on Texture of Materials, Saint George, USA
  3. Kumar M., Upadhyaya A., Gurao, N.P., Crystal plasticity simulations of rolling texture evolution in two phase tungsten heavy alloy, (2017) 18th International Conference on Texture of Materials, Saint George, USA
  4. Felege N., Upadhyaya A., Gurao, N.P., Evolution of micro-texture and microstructure during conventional sintering of copper , (2017) 18th International Conference on Texture of Materials, Saint George, USA
  5. Mishra S., Yadava M, Kulkarni K., Gurao, N.P., New insights on modeling deformation texture and yield strength anisotropy in age hardenable Al-Mg-Si alloys, (2017) 18th International Conference on Texture of Materials, Saint George, USA
  6. Sinha, S., Gurao, N.P., Twin reversibility in a-titanium during tension-compression deformation to study Bauschinger effect, (2014) 17th International Conference on Strength of Materials, Bruno, Czech Republic.
  7. Gurao N. P., Study of heterogeneity in plastic deformation using EBSD and synchrotron micro-diffraction, (2014) EBSD-2014, Royal Microscopy Society Annual Conference, London, UK
  8. Gurao N. P., Suwas S., Texture Evolution in Two phase FeNiCr alloys, (2009) 15th International Conference on Strength of Materials, Dresden, Germany