1Sutanuka Mohanty, Nilesh P.Gurao and , "Sinter Ageing of Equiatomic Al20Co20Cu20Zn20Ni20 High Entropy Alloy via Mechanical Alloying"
2Amit S.Sharma, , and B.Basu; Microstructure-Hardness-Wear resistance correlation in ultrafine grained Cu-TiB2-Pb composites
3Pathan Yousaf Khan and , Effect of Matrix on Melting and Solidification Behaviour of Pb-Sn Embedded Alloy Nanoparticles
4Sumanta Samal, Priya Gautam, Swapnil Agarwal , and B.Govind; and B.Govind; Microstructural evolution of ultrafine Ti-Fe-Co alloys, Materials Science Forum, 2014
5Sumanta Samal, Ajit Kumar Misra , and Govind; Mechanical Properties of Novel Ti-Cu-Ni-Co-Fe High Entropy Alloys
6Amit S. Sharma,, and Bikramjit Basu; Microstructure-wear resistantce correlation and wear mechanisms of spark plasma sintered Cu-Pb nanocomposities
1S.R.Sahu, M.Manolata Devi, P.Mukhopadhyay, P.Sen and ,Optical Property Characterization of Novel Graphene X (X= Ag,Au, Cu) Nanoparticle Hybrids, J. Nanomaterials (Special issue on Optical Properties of Nanoparticle and Nanocomposites).
2Alok Kumar,, and Bikramjit Basu;Fretting wear behavior of Hydroxyapatite-Titaniumcomposites in simulated body fluid, supplemented with 5g/L bovine serum albumin, special issue on Tribology of dental materials in
3P.Yousaf Khan, V.Bhattacharya, , and K.Chattopadhyay, Melting and Solidification Behaviour of Pb-Sn Embedded Alloy Nanoparticles, J.Nanoparticles
4C.S.Tiwary, S.Kashyap, ,K.Chattopadhyay, Synthesis of bio-compatible pure iron magnetic nanoparticles in large quantity, J. Physics D: Applied Physicss
5Amit S.Sharma, Nisha Misra, ,and Bikramjit Basu,Fretting wear study of Cu-10wt%Pb and Cu-10wt%Pb-10 wt% TiB?2 composite, Wear
6Alok Kumar, , and Bikramjit Basu, Spark Plasma Sintered Hydroxyapatite-Titanium Composites with High SEVNB Toughness
7Sumanta Samal and, , Novel High Strength Ni48Cu10Co2Ti38Ta2 Composite with Enhanced Plasticity
8Alok Kumar,, T.Webstar and B.Basu, Flow cytometry analysis of human fetal osteoblast fate processes on spark plasma sintered Hydroxyapatite-Titanium biocomposites
9, Amit S. Sharma, and Bikramjit Basu, Sintering Behavior of Nanocrystalline Cu-Pb composites with Addition of TiB2 by Spark Plasma Sintering, View Point paper on Spark Plasma Sintering
10Amit S.Sharma, Nisha Misra, , and Bikramjit Basu, Densification Kinetics and Phase Evolution of Spark Plasma Sintered Cu-10 wt% TiB2 and Cu-10 wt% TiB2-10 wt% Pb Composites
11Sanghita Mirdhya, Sumanta Samal, P.Yousaf Khan and,, and Govind, Processing and Consolidation of Nanocrystalline Cu- Zn-Ti-Fe-Cr High Entropy Alloys by Mechanical Alloying, Materials and Metall.Trans.A
12Amit S. Sharma, , and Bikramjit Basu, Fine Scale Characterization of Surface/Subsurface and Nanosized Debris Particles on Worn Cu-10 % Pb Nanocomposites
13C.S.Tiwary, A.Verma, S.Kashyp, ,and K.Chattopadhyay; Preparation of Free Standing Zn Nanocrystallites by Combined Milling at Cryogenic and Room Temperatures
14Sumanta Samal, B.Mondal,, and Govind; Electron Microscopic Study on the Suction Cast in-situ Ti-Fe-Sn Ultrafine Composites
15K. Shravan Kumar and , Effect of thiourea on grain refinement and defect structure of the pulsed electrodeposited nanocrystalline copper
16Alok Kumar, Sharmistha Dhara, ,and B.Basu; Biomineralization study on Spark Plasma Sintered HA-Ti composites