M.Tech Alumni

Ms. Subhra Khan

“Soft Magnetic Properties of Al-Co-Fe-Ni Multicomponent Alloys”

NA

Ms. Kajori Sardar

“Assessment of High Entropy Alloy for Photocatalytic Treatment of some Pharmaceutically active compounds in water”

NA

Mr. Rahul Poddar

“A Combined Experimental and Computational Study on Microstructure Evolution in Ni-Al alloy & Ni-Al-Cr alloy”

Ph.D in Electrical Engg. at IIT Kanpur

Mr. Arghya Banerjee

“Low-Cycle Fatigue Response of Metastable TRIP-assisted Fe-Mn-Co-Cr HEA: Role of Initial Martensite Fraction”

Product Integration Engineer at Micron

Mrs. Pallabi Roy

“Recovery of Rare Earth Elements from Waste Fluorescent Lamps”

Tata Steel

Mr. Himanshu Saket

“Synthesis of Co-Cu-Fe-Ni multicomponent alloy film and nanowires by electrodeposition process”

Tata Steel

Mr. G.V.S.S. Manoj Kumar

“Machine Learning Assisted Prediction of Oxidation Behaviour of Refractory High Entropy Alloys”

KPMG India

Miss. Jhilik Sen

“The Effect of Silicon Addition on Microstructural Evolution and Mechanical Properties of Equiatomic Fe-Mn-Ni Medium Entropy Alloy”

Kent PLC

Mrs. Shruti Srivastava

“Recovery of Rare Earth Elements (Nd, Dy) from spent magnets using EDTA Functionalized Chitosan”

Senior analyst at HSBC

Mr. Bidesh Mondal

“2D-MoS2 Decorated by High Entropy Alloy Nanoparticles for Gas Sensing Application”

Applied Materials

Mr. Mayank Sunil Jaiswal

“Design & Development of Refractory High Entropy Superalloys”

Senior analyst at HSBC

Mr. Akhil Bejjipurapu

“Designing Hexagonal Close Packed High Entropy Alloys Using Machine Learning”

Ph.D. Candidate at Purdue University

Mr. Pratip Sankar Banerjee

“Ultra Pure Free Standing Metallic Nanoparticles via Cryomilling: Formation and Stabilization”

Ph.D. Candidate at IIT Delhi

Mr. Samir Mandal

“Development and Mechanical Properties of CNT and Graphene Nanoplatelet Polymer Composite”

PHD Student at IISc Bangalore

Mr. Nikhil Sahu

“Fluid Flow Modeling During Liquid Phase Exfoliation of Graphite to Obtain Graphene”

PwC Risk CoE

Mrs. Shivangi Srivastava

“Investigation of Structure and Properties of Fe-Co-Ni-Mn-V and Gd-La-Tb-Y-Ho High Entropy Alloys”

Mr. Pabitra Mohan Nayak

“Microstructure, Mechanical and Thermoelectric study of High Entropy Alloys”

Scientist/Engineer-SD, ISRO

Miss. S. Gangopadhyay

“The Effect of Carbon Addition on Microstructure and Mechanical Properties of Nb-rich Nb-Si-Cr alloys”

Tata Steel

Mr. Sagar Boina

“Comprehensive Experimental and Computational Study on Eutectic High Entropy Alloys”

Sr. Technologist at Tata Group

Mr. Aditya Swain

“High Temperature Deformation Behaviour & Processing Map of Equiatomic CuCoFeMnNi High Entropy Alloy”

Principal Researcher,R&D, Tata Steel

Mrs. Rani Agarwal

“Deformation behavior of high entropy alloys”

Applied Materials

Mr. Sailesh Nayakudugari

“Precipitation Hardenable High Entropy Alloys: Theory and Experiment”

Sahajanand Medical Technologies Ltd.

Mrs. Semanti Mukhopadhyay

“The Effect of Titanium on the Tungsten Free Cobalt Base Superalloys”

Pacific Northwest National Laboratory

Mr. Maitrey Verma

“Synthesis and Characterization of Graphene and Graphene Titania Nanocomposite”

Analytics Evangelist

Mr. Pritam Dey

“Development of Novel Lead Free Organometallic Halide Based Solid State Perovskite Solar Cell”

PhD at IIT Kanpur

Mrs. P. Divya Janani

“Phase transformation and deformation study on Co20Cu20Fe20Mn20Ni20 High Entropy Alloy”

Material Scientist at Saint-Gobain Innovation Hub

Dr. Shikhar Misra

“Bulk Preparation of Graphene: Synthesis and Application”

Assistant Professor at IIT Kanpur

Mr. Rajan Biswas

“Development of Brazing Alloys and Techniques for Titanium/Steel Couple”

Scientist at CSIR-CGCRI

Mr. Nirmal Dolai

“Synthesis and Catalytic Properties of Graphene - Pt/Pd Alloy Nano Hybrids”

Sr. Research Scientist at TCG Lifesciences

Mr. Tazuddin

“Computational and experimental studies on design and development of novel multiprincipal multicomponent alloys”

Research Engineer at Saint Gobain

Mr. Tarak Kansabanik

“Effect of ternary and quaternary additions to Nb-rich Nb-Si multicomponent alloys”

Assistant Director at Ministry of MSME

Mr. Gourahari Behera

“A Study on Cu-Ni Alloy Nanoparticles using Experimentation and Simulation”

Assistant Professor at VSSUT, Burla

Mr. Goutam Mandal

“Modeling and Measurement Of Heat Flow During Solidification of Metals And Alloys”

Mr. Manoj Chintapatra

“Ionic Conductivity of Sm0.075Nd0.075Ce0.85O2-δ Ceramic Synthesized using Spark Plasma Sintering”

Laboratory Manager (Refractories)

Mr. Biswanath Paira

“Microstructural Development of Nb-Based Multicomponent Alloys for Atomic Energy Applications”

Battery Manufacturing Engineer at Ford Motors

Mr. Suresh Chand

“Development of Brazing Alloys and Technique for Ti and its Alloys”

Assistant Professor at PEC

Mr. Sumit Ranjan Sahu

“Synthesis and Characterization of Graphene and Graphene-Metal Nanoparticle Hybrids via Chemical Routes”

Cell Test Engineer, Tesla Inc.

Mr. Ajit Kumar Mishra

“Processing, Characterization and Mechanical Behavior of Ti-Cu-Fe-Co-Ni High Entropy Alloys”

Miss. Barnali Mondal

“Processing, Characterization and Mechanical Properties of In-situ Ti-Fe-Sn Ultrafine Composites”

Postdoctoral Researcher at Carnegie Mellon University

Miss. Sharmistha Dhara

“In Vitro Biomineralization Behavior of HA-Ti Composites Prepared by Spark Plasma Sintering”

Materials researcher at E-magy

Mr. Shravan Kairy Kumar

“Effect of Thiourea on Pulse Electrodeposition of Nanocrystalline Copper”

Higher Scientist at National Physical Laboratory, UK