Bishakh Bhattacharya
Mechanical Engineering Department
Head, Cognitive Science Programme




SMSS Group




Research Interest

  • Active and Passive Vibration Control 
  • Structural Health Management
  • Energy Harvesting System
  • Robotics & Automation
  • Intelligent System Design
  • Child- Robot Interaction
Prof Bishakh Bhattacharya



 Academic Profile

 Administrative Responsibilities


 Curriculum Vitae (Full)

 Curriculum Vitae (short)

 Editorial Board Members

 Invited Lectures


 Online Courses


 Peer Recognition

 Product Development

 Professional Experience




 Seminar & Workshop

 Technology Development

 Teaching Experience

 Thesis Supervision



Books & Book-Chapters


  1. Pipe Inspection Robots for Structural Health and Condition Monitoring, Harutoshi Ogai and Bishakh Bhattacharya, Springer, 2018

  2. Book Chapters:-
  3. Smart Material Based Micro-sensors and Actuators for Micromachining, Introduction to Micromaching , Narosa, 2010, 17.1-20.

  4. Practical Applications in Constrained Evolutionary Multi-objective Optimizations, Springer, 2016, pp. 159-179.

  5. Advances in Structural Engineering, Volume Three, 2016, pp.2621-2647.

International Journals & Proceedings


  1. Santhakumar Sampath, Kanhaiya Lal Chaurasiya, Pouria Aryan, Bishakh Bhattacharya, An innovative approach towards defect detection and localization in gas pipelines using integrated in-line inspection methods, Journal of Natural Gas Science and Engineering

  2. Ankur Dwivedi, Arnab Banerjee, Bishakh Bhattacharya, Dynamics of Piezo-Embedded Negative Stiffness Mechanical Metamaterials: A Study on Electromechanical Bandgaps, Volume 1: Acoustics, Vibration, and Phononics

  3. Ankur Dwivedi, Arnab Banerjee, Sondipon Adhikari, Bishakh Bhattacharya., Optimal electromechanical bandgaps in piezo-embedded mechanical metamaterials, International Journal of Mechanics and Materials in Design.

  4. A. Singh, T. Mukhopadhyay, S. Adhikari, B. Bhattacharya. , Voltage-dependent modulation of elastic moduli in lattice metamaterials: Emergence of a programmable state-transition capability, International Journal of Solids and Structures


  5. Gupta, V., Adhikari, S. and Bhattacharya, B., Exploring the dynamics of hourglass shaped lattice metastructures, Nature Scientific Reports 10 (1), 1-12, 2020

  6. Jain, A. K., Sharma, A. K., Khandekar, S. and Bhattacharya, B., Shape Memory Alloy-Based Sensor for Two-Phase Flow Detection, IEEE Sensors Journal 20 (23), 14209-14217,

  7. Biswas, K, Rajput, P., Gupta, A., Bhattacharya, B. and Gupta, T., A User-Centric Design Thinking Approach for Advancement in Off-Line PM Air Samplers: Current Status and Future Directions, Aerosol Science and Engineering, 1-21,

  8. Srivastava, R., Kumar, R. and Bhattacharya, B. Vibration Response Studies of a Bi-Morph SMA Hybrid Composite Using 3D Laser Doppler Vibrometer, Smart Materials, Adaptive Structures and Intelligent Systems 84027, V001T03A003

  9. Shah, N., Bhattacharya, B., Kanchwala, H., Development of a Novel Viscoelastic Nanocomposite and Investigation of Its Damping Capacity for Large Frequency Band, Advances in Structural Vibration, 233-252,

  10. Sampath, S., Sohn, S. and Bhattacharya, B. Development of novel integrated in-line inspection techniques for pipeline inspection, SPIE Future Sensing Technologies 11525, 115250C, 2020

  11. R Srivastava, B Bhattacharya, Thermoelastic and Vibration Response Analysis of Shape Memory Alloy reinforced Active Bimorph Composites, Smart Materials and Structures ,

  12. Pandey, M., Regis, G. R., Datta, R., Bhattacharya, B., Surrogate-assisted multi-objective optimization of the dynamic response of a freight wagon fitted with three-piece bogies, International Journal of Rail Transportation

  13. Dwivedi, A., Banerjee, A. and Bhattacharya, B., A novel approach for maximization of attenuation bandwidth of the piezo-embedded negative stiffness metamaterial, Proccedings of the SPIE, April 2020,

  14. Singh, A., Banerjee, B. and Bhattacharya, B., Metamaterial inspired tensairity beam for frequency band attenuation, Proceedings of the SPIE, Volume 11376, Active and Passive Smart Structures and Integrated Systems XIV; 113762D (2020),

  15. Gupta, V., Adhikari, S. and Bhattacharya, B., Locally resonant mechanical dome metastructure for bandstructure estimation, Proccedings of the SPIE, April 2020, https://DOI: 10.1117/12.2558931

  16. Bhaskar, J., Sharma, A. K., Bhattacharya, B. and Adhikari, S., A review on Shape Memory Alloy Reinforced Polymer Composite Materials and Structures, Smart Materials and Structures,

  17. Dwivedi, A., Banerjee A. and Bhattacharya, B., Simultaneous energy harvesting and vibration attenuation in piezo-embedded negative stiffness metamaterial, Journal of Intelligent Material Systems and Structures , 2020-03-06, DOI: 10.1177/1045389X20910261.


  18. Adhikari, S., Rastogi, A. and Bhattacharya, B., Piezoelectric vortex induced vibration energy harvesting in a random flow field, Smart Materials and Structures

  19. Chaurasiya , K. L., Bhattacharya , B., Varma A. K. and Rastogi, S., (2019), Dynamic modeling of a cabin pressure control system, Proc IMechE Part G: J Aerospace Engineering,

  20. Santhakumar S. , Bhattacharya , B., Aryan, P.  and Sohn H., (2019),  A Real-Time, Non-Contact Method for In-Line Inspection of Oil and Gas Pipelines Using Optical Sensor Array, Sensors 2019, 19, 3615;

  21. Gupta, V., Chattoraj, A., Banarjee, A. and Bhattacharya B., Wave propagation in auxetic mechanical metamaterial: Bloch formalism for various boundary conditions, Proceedings of the SPIE, Volume 10967, Active and Passive Smart Structures and Integrated Systems XII; 109671K

  22. Kalra, S., Munjal, B. S., Singh, V. R., Mahajan M. and Bhattacharya B., (2019), Investigations on the suitability of PEEK material under space environment conditions and its application in a parabolic space antenna, Advances in Space Research doi:10.1016/j.asr.2019.03.006

  23. Pandey, M. and Bhattacharya, B. (2019), Effect of bolster suspension parameters of three-piece freight bogie on the lateral frame force, International Journal of Rail Transportation

  24. Sharma, A. K., Bhattacharya, B. (2019), Parameter estimation of butyl rubber aided with dynamic mechanical analysis for numerical modelling of an air-inflated torus and experimental validation using 3D-laser Doppler Vibrometer,  Journal of Low Frequency Noise, Vibration and Active Control,
    DOI: 10.1177/1461348419825685

  25. Pandey, M. and Bhattacharya, B. (2019), A Parametric Study Analysing the Effect of Bolster Suspension Parameters on the Car-body Dynamic Response in a Freight Wagon Fitted with Three-Piece Bogie, Journal of Vibration Engineering & Technologies, DOI: 10.1007/s42417-019-00105-4

  26. Dwivedi, A., Banerjee, A., Bhattacharya, B. (2019), Study of piezo embedded negative mass metamaterial using generalized Bloch theorem for energy harvesting system, Proceedings of the SPIE, Volume 10967, Active and Passive Smart Structures and Integrated Systems XII; DOI: 10.1117/12.2514248

  27. Zajam, S. and Bhattacharya, B. (2019), Application of Wavelet Analysis and Machine Learning on Vibration Data from Gas Pipelines for Structural Health Monitoring, Procedia Structural Integrity [Accepted for Publication]


  28. Kalra S., Munjal B. S. and Bhattacharya B. (2018), Development of Shape Memory Alloy Actuator Integrated Flexible PEEK Antenna with Simultaneous Beam Steering and Shaping Ability, Journal of Intelligent Material System and Structures. [Accepted for Publication]

  29. Srivastava R., Sharma A. K., Hait A. K. and Bhattacharya B. (2018), Design and development of active bimorph structure for deployable space application, Proc. SPIE 10595, Active and Passive Smart Structures and Integrated Systems XII,

  30. 2017

  31. Kalra, S., Bhattacharya, B. and Munjal, B. (2017), Design of Shape Memory Alloy Actuated Intelligent Parabolic Antenna for Space Applications, Smart Materials and Structures,

  32. Singh, K., Kant, R., Kulkarni, A., Shridhar, A., Bhattacharya, B. and Bhattacharya, S. (2017), Directional Vibration Suppression of Viscoelastic Dampers using Oil filled Helical Micro-channels, Journal of Vibration and Control.

  33. Jaipurkara, T., Kanta, P., Khandekar, S., Bhattacharya, B. and Paralikarb S. (2017), Thermo-Mechanical Design and Characterization of Flexible Heat Pipes, Journal of Applied Thermal Engineering,

  34. Kuponu, O. S., Kadirkamanathan, V., Bhattacharya, B., Pope, S. A. (2017), Integrated Sensing, Monitoring and Healing of Composite Systems. Advances in Science and Technology 101, pages 62-68.


  35. Oluwafemi K., Visakan K., Bhattacharya B. and Pope S. (2016), Using feedback control to actively regulate the healing rate of a self-healing process subjected to low cycle dynamic stress, Smart Materials and Structures.

  36. Saha A., Wahi P. and Bhattacharya B. (2016), Characterization of friction force and nature of bifurcation from experiments on a single-degree-of-freedom system with friction-induced vibrations, Tribology International, Volume 98, 1 June 2016, Pages 220-228.

  37. Ahmed, F., Deb, K. and Bhattacharya, B. (2016), Structural Topology Optimization using Multi-objective Genetic Algorithm with Constructive Solid Geometry Representation, Applied Soft Computing.

  38. 2015
  39. Datta R., Jain A., Bhattacharya B. (2015): A piezoelectric model based multi-objective optimization of robot gripper design, Structural and Multidisciplinary Optimization, DOI 10.1007/ s00158-015-1340-y. [download]

  40. Pandey Anmol, Datta R., Bhattacharya B. (2015): Topology optimization of compliant structures and mechanisms using constructive solid geometry for 2-d and 3-d applications, Soft Computing, DOI 10.1007/s00500-015-1845-8. [download]

  41. Datta R., Pradhan S., Bhattacharya B. (2015): Analysis and Design Optimization of a robotic gripper using multi-objective Genetic Algorithm, IEEE Transactions on Systems, Man and Cybernetics: Systems, DOI 10.1109/TSMC.2015.2437847. [download]

  42. Roy K., Bhattacharya B., Ray-Chaudhuri S., (2015): ARX model-based damage sensitive features for structural damage localization using output-only measurements, Journal of Sound and Vibration, Vol. 349, pp. 99-122. [download]

  43. Jain A. Datta R., Bhattacharya B., (2015): Unified minimalistic modeling of piezoelectric stack actuators for engineering applications, Advances in Intelligent Systems and Computing, Vol. 345, pp. 459-473.

  44. Misra K. Mohan, Bhattacharya B., Singh O., and Chatterjee A. (2015): A New Case-Depth Estimation Technique for Induction Hardened Plates Based on Dynamic Response Studies using Laser Doppler Vibrometer, Journal of Systems and Control Engineering, Vol. 229, No. 1, pp 49-62. [download]

  45. 2014
  46. Paul P., Ingale C., and Bhattacharya B. (2014) : Design of a Vibration Isolation System using Eddy Current Damper Part C, Journal of Mechanical Engineering Science, Vol. 228, No. 4, pp. 664-675. [download]

  47. Misra, M.K., Bhattacharya, B., Singh, O., Chatterjee, A.(2014): A Portable Induction Hardening System with New Dynamic Response based Characterization of Hardened Samples. Journal of Experimental & Applied Mechanics 5 (1).

  48. Anderson, S. R., Aram, P. and Bhattacharya, B. and Kadirkamanathan, V (2014): Analysis of composite plate dynamics using spatial maps of frequency-domain features described by Gaussian processes. IFAC Proceedings Volumes 47 (1).

  49. Chawla, A., Bhattacharya, B., Munjal, B. S. (2014): Optimal actuation of SMA-wire network for adaptive shape control of a space antenna system. Proceedings Control Automation Robotics & Vision (ICARCV), Pages 306-311.

  50. 2013
  51. Sharma S. K., Gaur H., Kulkarni M., Patil G., Bhattacharya B. and Sharma A. (2013): PZT-PDMS Composite for Active Damping of Vibrations, Composites Science and Technology, Vol 77, pp 42-51, 2013. [download]

  52. Singh R. K., Ghosh A., Rishi kant, Asfer M., Bhattacharya B., Panigrahi P.K. and Bhattacharya S. (2013): Passive vibration damping using polymer pads with micro-channel arrays, IEEE/ASME Journal of Microelectromechanical Systems, JMEMS , Vol. 22, NO. 3, pp 695-707, 2013. [download]

  53. 2012
  54. Roy K., Ogai H., Bhattacharya B., Roychoudhuri S. and Qin J. (2012) Damage Detection of Bridge using Wireless Sensors, Proc. IFAC MMM-2012, Vol. 2 Part1, pp. 107-111. [download]

  55. Ahmed F., Bhattacharya B. and Deb K. (2012); Constructive Solid Geometry based Topology Optimization using Evolutionary Algorithm, Proc. BI CTA-2012; Vol. 201, pp. 227-238.

  56. Saha A., Pandey S., Bhattacharya B. and Wahi P. (2012): Analysis and control of friction-induced oscillations in a continuous system, Journal of Vibration and Control, Vol. 18 No. 3 467-480, 2012. [download]

  57. 2011
  58. Bhattacharya B. and Patel O.P. (2011): A New Shape Memory Alloy based Smart Encoder for Sensing of Direction and Angular Motion, Sensors and Transducers , Vol. 4, No. 127, pp. 45- 56. [download]

  59. Agarwal V., Ogai H., Nishijima K. and Bhattacharya B. (2011): Inspection of Pipe Inner Surface using Advanced Pipe Crawler Robot with PVDF Sensor based Rotating Probe, Sensors and Transducers, Vol. 4, No. 127, 2011, pp.45-56. [download]

  60. Kumar A., Fleming P. and Bhattacharya B. (2011): Vibration suppression and damage detection in smart composite laminate using high precision finite element, Proc. SPIE, Vol. 7982, pp. 1-16.

  61. R Oyabu, K Nishijima, Z Wang, H Ogai, B Bhattacharya (2011): Advanced Pipe Inspection Robot using rotating probe and Image processing. 16th International Symposium on Artificial Life and Robotics, AROB'.

  62. Banerjee, B Bhattacharya, AK Mallik (2011): Forward and inverse analyses of an SMA actuated compliant link. Journal of Mechanisms and Robotics 3 (2).


  63. Banerjee A., Bhattacharya B. and Mallik A.K. (2010): Optimum discrete location of a shape memory alloy wire for discrete actuation of a compliant link, Journal of Mechanical Design , Vol.132, Issue 2. [download]

  64. 2009
  65. Banerjee A., Bhattacharya B. and Mallik A.K. (2009): Forward and inverse analyses of smart compliant mechanism for path generation, Mechanism and Machine Theory, Vol. 44, pp. 369-381. [download]

  66. Kudikala R., Deb K. and Bhattacharya B. (2009): Multi-objective Optimization of Piezoelectric Actuator Placement for Shape Control of Plates using Genetic Algorithms, Journal of Mechanical Design, Vol. 131, pp. 1-11. [download]

  67. Saha A., Bhattacharya B. and Wahi P. (2009): A comparative study on the control of friction-driven oscillations by time-delayed feedback, Journal of Nonlinear Dynamics, Vol. 60, pp. 15-37. [download]

  68. Bhatnagar R.M., Bhattacharya B. and Biswas G. (2009): Analysis of Pilot Valve and Taper Groove Based Damper, Proceedings of I Mech E London Part C, J. Mechanical Engineering Science, Vol. 223 (C4), pp 859-871. [download]

  69. Bandyopadhyay D., Bhattacharya B. and Dutta A. (2009): Pseudo-rigid Body Modelling of IPMC for a Partially Compliant Four-bar Mechanism for Work-volume generation , Intelligent Material Systems and Structures, Vol. 20, No.1, pp. 51-62. [download]

  70. Bandopadhya D., Bhattacharya B. and Dutta A. (2009): Characterization of IPMC as passive and active damper as an alternative novel smart actuator, Journal of Reinforced Plastics and Composites,Vol. 28 , 2 : pp. 183 - 200.


  71. Banerjee A., Bhattacharya B. and Mallik A.K. (2008): Large deflection of cantilever beams with geometric non-linearity: Analytical and numerical approaches. International Journal of Non-Linear Mechanics, Vol. 43 , pp. 366-376. [download]

  72. Bandopadhya D. and Bhattacharya B. (2008): Design and Development of a Partially Compliant 4-bar using IPMC for Work Volume Generation, Proceedings of AIP , Vol. 1029, pp. 171-182.

  73. Jaiswal V., Anand K. and Bhattacharya B.(2008): Structural Health Monitoring of Ribbon Reinforced Composite Laminate using Piezoelectric Sensory Layer. International Journal of COMADEM, Vol. 11, No. 1 pp. 09-17. [download]

  74. RK Patel, B Bhattacharya, S Basu (2008): Effect of interphase properties on the damping response of polymer nano-composites. Mechanics research communications 35 (1)


  75. A Banerjee, J Badothiya, B Bhattacharya, AK Mallik (2008): Optimum Discrete Location of Shape Memory Alloy Wire for Enhanced Actuation of Slender Fixed-
    Free Beam. Proc. ASME. 43314; Smart Materials, Adaptive Structures and Intelligent Systems, Volume 1:701-708.

  76. A Kumar, B Bhattacharya (2008): Real-time integrity monitoring of composite laminates with magnetostrictive sensory layer. Proc. SPIE 7268, Smart Structures, Devices, and Systems IV, 72680N; doi: 10.1117/12.810614

  77. Bhattacharya B., Ahalwat S. and Vidyashankar B. R. (2007): Closed Form Studies of a New Hybrid Damping Technique Using Active Magnetostrictive Composite and Hard Coated Damping Alloys. Smart Materials and Structures, Volume 16, 2007, pp. 1-8. [download]

  78. Vidyashankar B. R. and Bhattacharya B. (2007): A New Hybrid Vibration Control Methodology Using a Combination of Magnetostrictive and Hard Damping Alloys. Smart Structures and Systems, Vol.3, No.2.[download]

  79. Bandopadhya D., Bhattacharya B. and Dutta A. (2007): Active Vibration Control Strategy for a Single Link Flexible Manipulator Using Ionic Polymer Metal Composite. Journal of Intelligent Material Systems and Structures, Vol. 19, No. 4, pp. 487-496.

  80. Bandopadhya D., Bhattacharya B. and Dutta A. (2007): Modeling of Hybrid Damping Scheme Using Smart Magnetostrictive Composites for Flexible Manipulator. Journal of Reinforced Plastics and Composites Vol. 26 No. 9, pp. 487-496. [download]

  81. Patel R. K., Bhattacharya B. and Basu S. (2007): A Finite Element Based investigation on obtaining high material damping over a large frequency range in Viscoelastic Composites. Journal of Sound and Vibration, Vol. 303, pp.753-766. [download]

  82. Bandyopadhya D., Bhattacharya B. and Dutta A. (2007): An Active Vibration Control Strategy for a Flexible Link Using Distributed Ionic Polymer Metal Composites. Smart Structures and Systems, Vol. 16, pp. 617-625.


  83. Bandopadhya D., Bhattacharya B. and Dutta A. (2006): Active vibration control using Terfenol-D with H-infinity filter. International Journal of Engineering Modeling, Vol.19, No. 1-4, pp. 33-44.

  84. Kulkarni M. M., Bandyopadhyaya R., Bhattacharya B. and Sharma A. (2006): Microstructural and Mechanical Properties of Silica - PEPEG Polymer Composite Xerogels. Acta Materialia, Vol. 54, No. 19, pp. 5231-5240. [download]


  85. B Bhattacharya. (2004): Vibration damping system and a method of damping vibrations, The Journal of the Acoustical Society of America 116, 623 (2004);


  86. Mani Pandey, K. K., Prakash O. and Bhattacharya B. (2003): Variation of activation volume with temperature for Fe, Si and Ge. Materials Letters, Vol 57, pp. 4319-4322. [download]

  87. A Gupta, B Bhattacharya. (2003): Hybrid damping of smart flexible rotating beam [5062-79]. Proceedings-SPIE, the International Society for Optical Engineering.


  88. Bhattacharya B., Tomlinson G. R. and House J. R. (2002): Vibration suppression of structures with viscoelastic inserts. Proc, IMechE, Vol. 216, Part-C, pp. 983-995. [download]

  89. Gupta A. and Bhattacharya B. (2002): Hybrid damping of smart flexible rotating beam. Proc. SPIE - Vol 5062, pp.590-598.

  90. B Bhattacharya, AV Krishnamurty, M Anjanappa, YF Wu, MS Bhatt (2002): Agarwal BD and Broutman L J, Analysis and Performance of Fiber Composites, John Wiley & Sons Inc., 1990. Aerospace Science and Technology 6 (3).

  91. 2001
  92. Buravalla V.R., Bhattacharya B., and Tomlinson G. R. (2001): Hybrid vibration control of laminated composite structures using magnetostrictive and hard damping materials . Proc. SPIE , Vol. 4331, pp. 386-395.

  93. 2000
  94. Bhattacharya B., House J. R. and Tomlinson G. R. (2000): Low and High Frequency Energy Absorbing Composite Joints. Proc. SPIE , Vol. 3989, pp. 152-158.

  95. Bhattacharya B., Vidyashankar B. R., Patsias S. and Tomlinson G. R. (2000): Active and passive vibration control of flexible structures using a combination of magnetostrictive and ferro-magnetic alloys . Proc. SPIE , Vol. 4073, pp. 204-214.

  96. 1999
  97. Bhattacharya B., House J. R., Mercy S.E. and Tomlinson G. R. (1999): Finite Element Modelling and Performance Estimation of Energy Absorbing Composite Joints. Proc. SPIE , Vol. 3672, pp. 310-316.

  98. Bhattacharya B., Tomlinson G. R. and House J. R. (1999): Effect of Shapes of Viscoelastic Inserts on Vibration Absorption in Laminated Composites. Proc. SPIE , Vol. 3672, pp. 316-324.

  99. Bhattacharya B., Rongong J. A. and Tomlinson G. R. (1999): Vibration Suppression Performance of Piezoceramic and Magnetostrictive Materials in Hybrid Constrained Layer Damping. Proc. SPIE , Vol. 3672, pp. 242-250. [download]

  100. 1998
  101. Krishna Murty, A. V., Anjanappa, M., Wu, Y., Bhattacharya, B. and Bhat, M.S. (1998): Vibration Suppression in Laminated Composite Beams Using Embedded Magnetostrictive Layers. Journal of the Institution of Engineers (India), Vol 78, pp. 38-44.

  102. Bhattacharya, B., Krishna Murty A. V. and Bhat M. S. (1998): Vibration Analysis of Unsymmetric Laminated Composite Plates Using High Precision Triangular Elements. Mechanics of Composite Materials, Vol 5, pp. 5-23.

  103. Bhattacharya B., Krishna Murty A. V. and Bhat M. S. (1998): Finite elements for vibration analysis of unsymmetric laminated composite plates, Mechanics of Advanced Materials and Structures, Vol. 12. [download]

  104. Krishna Murty A. V., Bhat M. S., Bhattacharya B., and Maiti S. (1998): Vibration control of composite laminates using distributed smart layers, Proceedings of SPIE.

  105. 1996
  106. Bhattacharya, B., Krishna Murty, A. V., Bhat, M. S. and Anjanappa, M. (1996): Vibration Suppression in Slender Composite Beams Using Magneto-strictive Actuation, Journal of Aeronautical Society of India, Vol.48, No. 2.

Selected Published contributions to academic conference [39]

  1. A Narrative Speech, Gaze and Gesturing Robot Accessing to Human Emotion and Memory Which is Investigated by Using a Simultaneous Recording of Electroencephalogram and Eye-Tracker System, A. Muthusamy, G. Kaur, R. Gupta, V. Agarwal, B. Bhattacharya, S. Nakayama, M. Ichiki, J. Maniamma and H. Wagatsuma, 12th International Conference on Innovative Computing, Information and Control (ICICIC2017), August 28-30, 2017, Kurume, Japan.

  2. Transmissibility based Parameter Identification of Polymers using Multi-Objective Genetic Algorithm, R. Datta, S. Agarwal, A. K. Sharma and B. Bhattacharya, ICOVP-2017, (2017), IIT Gowhati, India.

  3. Thermo-Mechanical Characterization of Flexible Heat Pipes, T. Jaipurkar, S. Khandekar and B. Bhattacharya, Joint 18th IHPC and 12th IHPS, 2016, Jeju, Korea.

  4. Dynamic Properties of Waste Tyre Rubber Composites, B. K. Chaurashia, J. K. Bhaskar, B. Bhattacharya, COPEN-9, 2016, IIT Bombay, India.

  5. Studies on a Smart Reconfigurable Parabolic Space Antenna, S. Kalra, B. S. Munjal and B. Bhattacharya, 9th International Collaboration on Information, Production and Systems (ISIPS 2015), 2015, Waseda University, Japan.

  6. An overview of Smart Material Exploration in Texture Recognition: Comparative analysis with contemporary techniques, H. Panday, H. Mathur, M. Singh, B. Bhattacharya, ISSS National Conference on MEMS Smart Materials, Structures and Systems, 2015, Kochi, India.

  7. An Active Non-Destructive Technique for Structural Health Monitoring of Laminated Composites, S Katiyar and B Bhattacharya, National Conference on Condition Monitoring, 2015, DRDO, Vishakhapatnam, India.

  8. Design and Development of a Networked Health Monitoring and Control System
    Rajesh Ranjan, Basava Kumar Mukkundi, Bishakh Bhattacharya, Om Prakash Bhatt, IEDEC 2014, Santa Clara, California, USA.

  9. Design and Analysis of a Vibration Isolation System based on Four-bar Mechanism Integrated with Shape Memory Alloy Wire, Vaibhav Chaturvedi, Rituparna Datta, Bishakh Bhattacharya, CSCI 2014, Las Vegas, USA.

  10. Analysis of composite plate dynamics using spatial maps of frequency-domain features described by Gaussian processes, S. R. Anderson, P. Aram, B. Bhattacharya, V. Kadirkamanathan, ACODS 2014, IIT Kanpur.

  11. Multi response Optimization of Induction Hardening Process - a New Approach
    Mohan K Misra, Bishakh Bhattacharya , Onkar Singh and A Chatterjee, ACODS 2014, IIT Kanpur.

  12. Design and experimentation on passive vibration isolation systems using PZT-PDMS composite and a shape memory alloy wire integrated mechanism, S. B. Satpal, R. Datta, V. Chaturvedi, B. Bhattacharya, ACODS 2014, IIT Kanpur.

  13. Earthenware water filter – a double edged sustainable design concept for India, A. S. S. Muthusamy and B. Bhattacharya, ICORD – 13, IIT Madras.

  14. Aquatic Multi-Robot System for Lake Cleaning, P. Agarwal and B. Bhattacharya, CLAWAR-2013, University of Melbourne, Australia.

  15. Active Shape Control of Parabolic Antenna Systems Using Shape Memory Alloy (SMA), Praveen Kumar D, B. S Munjal and Bishakh Bhattacharya, ICIUS – 2013, India.

  16. Development of a Coupled Thermo-Electro Mechanical and Temporal Model of SMA Wire Using A Hybrid Approach, Parth P Paul and Bishakh Bhattacharya, ICIUS-2013, India.

  17. Constructive Solid Geometry based Topology Optimization using Evolutionary Algorithm, Proc. BICTA-2012; F. Ahmed, B. Bhattacharya and K. Deb, Indore, India.

  18. Experimental Modal Analysis for Damage Detection in Composite Plates using Laser Doppler Vibrometer, A. Kumar and B.Bhattacharya, AROB, International Conference on Research in Structural Health Monitoring, IPS Waseda, 2011, Japan.

  19. Cultural Influence in Aesthetic Design: A Case Study based on Intermediate Public Transport Vehicle , M. Arun. and B. Bhattacharya, ICROD-11, International Conference on Research in Design, IISc Bangalore, 2011.

  20. Pipe health Monitoring using PVDF Sensor, G. Bansal and B. Bhattacharya, International Conference on Research in Structural Health Monitoring, IPS Waseda, 2010, Japan.

  21. Energy Harvesting from a combination of solar, wind and vibrational energy, A. Sultane and B. Bhattacharya, International Conference on Research in Structural Health Monitoring, IPS Waseda, 2010, Japan.

  22. Advanced Pipe Inspection Robot using Rotating Probe, K. Nishijima, Y. Sun, R. K. Srivastava, H. Ogai and B. Bhattacharya, AROB-2010, Waseda, Japan, 2010.

  23. Shape Memory Alloy Wire Based Actuation of Beam Stiffener and Optimal Shape Control of Parabolic Space Antenna, N.Prasad,R.Lad, B.S.Munjal, A.C.Mathur and B. Bhattacharya, International, Conference on Smart Materials and MEMS, ISSS-2010, Nagpur, 2010.

  24. User study and design modifications of a CNG based intermediate public transport vehicle, Indo-Us Workshop on Designing sustaibale Products, Services and Manufacturing Systems, M Arun, K. Vimal and B. Bhattacharya , August 2009.

  25. Optimum offset of SMA wires for discrete actuation of cantilever beams, A Banerjee, B. Bhattacharya and A. K. Mallik, ASME International Conference, SMASIS2008, Maryland, USA, October 2008.

  26. Multi-objective Optimization of Piezoelectric Actuator Placement for Shape Control of Plate using Genetic Algorithm, R. Kudikala, K. Deb and B. Bhattacharya, SMASIS2008, Maryland, USA, October 2008.

  27. Modeling and Development of SMA wire based actuators with an application to Parabolic Space Antenna, N.S.R Prasad Ndevara, P. K. Mishrikotkar and B. Bhattacharya, International, Conference on Smart Materials and MEMS, ISSS-2007, Bangalore, 2007.

  28. Cooperation between a 4 DOF robotic hand and a human for carrying an object together Pankaj Aggarwal, Ashish Dutta and Bishakh Bhattacharya, SICE, Kagwa University, Japan, 2007.

  29. Information Design of a more usable web-site based on Human Computer Interaction Studies, M. Tiwari and B. Bhattacharya, International Conference on Human Computer Interfacing, Hyderbad, 2007.

  30. Bandopadhya, D., Bhogadi, D.B., Bhattacharya, B. and Dutta, A. (2006) Active Vibration Suppression of a Flexible Link using Ionic Polymer Metal Composite, CISRAM 2006, IEEE International Conference on Robotics, Automation and Mechatronics, IEEE Catalogue Number: 06EX1247C , ISBN: 1-4244-0025-2.

  31. Bandopadhya, D.B. and Bhattacharya, B. (2006) A Dynamic Performance Evaluation of Flexible Manipulator with Active Proportional Damping and Estimation Algorithm, CIS-RAM 2006, IEEE International Conference on Robotics, Automation and Mechatronics, IEEE Catalogue Number: 06EX1247C, 2006.

  32. Bhattacharya, B. and Barlingay, R. (2005) Integrated Damage and Damping Monitoring of Flexible Composite Manipulators using TEDS based Smart Sensors, ACIAR’05, 4th Asian Conference on Industrial Automation and Robotics, Paper No. F85, ISBN: 974-8208-58-3.

  33. Bhattacharya, B. and Jaiswal, A. (2004): Damage Detection in Ribbon Reinforced Composite Laminate using Piezoelectric Sensory Layer”, International Conference on Advances on Structural Integrity, ICASI/SH- C89, July; Bangalore, India.

  34. Asthana, C.B., Bhattacharya, B., Bhat, M.S. and Krishnamurthy, A.V. (1999): Static Output Feedback Design to Control a Smart Cantilever Beam', ISSS-SPIE'99, pp.472- 477.

  35. Krishna Murty, A.V., Bhat, M.S., Bhattacharya, B. and Maiti, S. (1996): Vibration Control of Composite Laminates Using Distributed Smart Layers, SPIE Conference on Smart Structures, Materials and MEMS, 12-14 December, 1996, India.

  36. Bhattacharya, B., Krishna Murty, A.V., Anjanappa, M. and Bhat, M.S. (1994): Dynamic Modelling of Smart Composite Beams’, National Symposium on Developments in Advanced Composites and Structures, India, 15 Sept. (1994). pp. 25-30.

  37. Bhattacharya, B., Bhat, M.S., and Krishna Murty, A.V. (1994): Dynamics and Control of Laminated Composite Structures with Surface Bonded/Embedded Sensors and Actuators, Discussion Meetings on Aerodynamic Testing and Structural Dynamics, 20- 21 Oct. (1994). pp. 141-156.

  38. Bhattacharya, B., Krishna Murty A.V. and Bhat, M.S. (1994): Free Vibration Study of Laminated Composite Plates Using High Precision Triangular Elements, National Seminar on Aero Structures, India, 7-9 Dec. (1994). pp. 483-493.


Copyright 2018

last updated on 31st October, 2018