Professor (HAG) Kamal Krishna Kar

Indian Oil Golden Jubilee Chair Professor (2022-2025)

Champa Devi Gangwal Chair Professor (2019-2022)

Umang Gupta Chair Professor (2015-2018)

Professor, Department of Mechanical Engineering

and Materials Science Programme
Indian Institute of Technology Kanpur

Kanpur 208016, UP, India

                                           Phone: (+91) (512) 2597687/2598703/(+91) (0)9415081153

                                                                                                     Fax: (+91) (512) 2597408

IIT-Kanpur

....If you can't help them, at least don't hurt them. Dalai Lama

Open thy mind walk alone Be not afraid, walk alone যদি তোর ডাক শুনে কেউ না আসে তবে একলা চলো রে..Rabindranath

Ek Doctor Ki Maut (Life of Dr. Subhash Mukhopadhyay): Watch at Least Once in Your Life, if Time Permits, How beautiful...???

My only regret is that you and your friends could not be punished for your crimes in this society...But GOD :):):)

Are you (highly motivated & hardworking postdoctoral fellows) looking for a mentor?         Drop an email

Area of Interests

-Carbon nanotubes, graphene, porous carbon, exfoliated graphite, -Nanostructured advanced materials including nanopolymers, -Multifunctional and functionally graded composites, -Nanocomposites including multiscale composites, -Carbon-carbon/silicon composites, -Finite element analysis of polymeric products, -Roadwheel of Military Battle Tank Arjuna

-Applications of materials in Fuel cell, Lithium battery, Thermoelectric, Water purification, Supercapacitor, High performance structural composites, Catalysis, and Biomedical Implants

Publications -Journal Papers: 302 -Books: 12+03 (special issue) -Book Chapters: 141 -Conference Papers: 135+++ -Patents: 64 -Conf Proceedings: 08 -Citation (Google Scholar)

Sponsored Projects -Projects in Progress: 04 -Projects Completed: 43 -Undergraduate Project:33++ -Advanced Nanoengineering  Materials Laboratory -Laboratory Staff: 01 -Acknowledgement

Students Supervised -Postdoc: 01+05(C) -PhD: 35 (completed) -PhD: 6 (ongoing) -M.Tech: 99(completed) -M.Tech: 01 (ongoing) -Visitors:++++

Prime Minister Sir Narendra Modi handed over a replica of the Arjun Main Battle Tank (MK-1A) to Army chief General Manoj Mukund Naravane in Chennai on February 14, 2021.   | Photo Credit: Ragu R

https://www.thehindu.com/news/national/prime-minister-hands-over-indigenous-arjun-tank-to-army/article33834519.ece

It is an indigenously designed tank which has been developed and manufactured by CVRDE, DRDO along with 15 academic institutions.

Acknowledgement: Prof. Anil K. Bhowmick (PhD Advisor), IIT-Kharagpur; Director, Combat Vehicles Research & Development Establishment (CVRDE); Dr. S.S. Prasad, IS and Director, DTSR (DRDO); Dr. H.H. Bhargava, Dy Director, DTSR (DRDO); Mr. Subhas C, Saraf, Chairman and Managing Director, Madras Elastomers Limited; Friends of Madras Elastomers Limited; and.......

 

Updated List/Citations

 

302. Title: Ramifications of vorticity on aggregation and activation of platelets in bi-leaflet mechanical heart valve: FSI study

Authors: Meraj Ahmed, Nirmal Gupta, Rashmoni Jana, Malay K. Das, and Kamal K. Kar

Reference: Journal of Biomechanical Engineering, ISSN: 0148-0731, eISSN: 1528-8951, Vol.: 144(8), pp.: 081002(17 pages), Year: 2022, ASME Digital Collection, The American Society of Mechanical Engineers (IF: 2.097)

https://doi.org/10.1115/1.4053665

301. Title: Enhanced thermoelectric performance of PbSe-graphene nanocomposite manufactured with acoustic cavitation induced defects

Authors: Chhatrasal Gayner, Raghunandan Sharma, Iram Malik, Mukesh Kumar, Sugandha Singh, Kiran Kumar, Jitendra Tahalyani, Tulika Srivastava, Kamal K. Kar, Hiroyuki Yokoi, and Amit K. Naskar

Reference: Nano Energy, ISSN: 2211-2855, Vol.: 94, pp.: 106943, Year: 2022, Elsevier (IF: 19.069)

https://doi.org/10.1016/j.nanoen.2022.106943

300. Title: Inner Cover for heteroatom doped graphene engineering for energy storage and conversion

Authors: Rajesh Kumar Sumanta Sahoo, Ednan Joanni, Rajesh K. Singh, Keiichiro Maegawa, Wai Kian Tan, Go Kawamura, Kamal K. Kar, Atsunori Matsuda

References: Materials Today, Vol.:39, Page: i, Year:2020, ISSN: 1369-7021, Elsevier,

(IF-26.943), https://doi.org/10.1016/S1369-7021(20)30347-3

Our article makes the cover page in materialstoday

299. Title: Heteroatom doped graphene engineering for energy storage and conversion

Authors: Rajesh Kumar Sumanta Sahoo, Ednan Joanni, Rajesh K. Singh, Keiichiro Maegawa, Wai Kian Tan, Go Kawamura, Kamal K. Kar, Atsunori Matsuda

References: Materials Today, Vol.:39, pp: 47-65, Year:2020, ISSN: 1369-7021, Elsevier,

(IF-26.943), https://doi.org/10.1016/j.mattod.2020.04.010

298. Title: Laser processing of graphene and related materials for energy storage: State of the art and future prospects

Authors: Rajesh Kumar, Angel Perez del Pino, Sumanta Sahoo, Rajesh. K. Singh, Wai K. Tan, Kamal K Kar, Atsunori Matsuda, Ednan Joanni,

References: Progress in Energy and Combustion Science, Vol.:91,pp: 100981 (pages:27) , Year:2022, ISSN: 0360-1285, Elsevier,

(IF-35.339), https://doi.org/10.1016/j.pecs.2021.100981

297. Title: Recent progress in the synthesis of graphene and derived materials for next generation electrodes of high performance lithium ion batteries

Authors: Rajesh Kumar, Sumanta Sahoo, Ednan Joanni, Rajesh Kumar Singh, Wai Kian Tan, Kamal Krishna Kar and Atsunori Matsuda

References: Progress in Energy and Combustion Science, Vol.:75, pp: 100786, Year:2019, ISSN: 0360-1285, Elsevier,

(IF-35.339), https://doi.org/10.1016/j.pecs.2019.100786

296. Title:Recent advances in thermoelectric materials

Authors: Chhatrasal Gayner, Kamal K. Kar

References: Progress in Materials Science, Vol.:83, pp: 330-382, Year:2016, ISSN 0079-6425, Elsevier,

(IF-48.165), https://doi.org/10.1016/j.pmatsci.2016.07.002

295. Title: Exploration of cobalt (II) modification in phenanthroline based conjugated organic polymer towards trifunctional electrocatalysis

Authors: Sugandha Singh, Manas K Ghorai, and Kamal K. Kar

References: Journal of Materials Chemistry A, Vol:12, pp: 24002412, Year:2024, ISSN 2050-7488 (print), ISSN 2050-7496 (online), Royal Society of Chemistry, UK (IF-14.551)

https://doi.org/10.1039/D3TA04961B

294. Title: A cobalt harnessed phenanthroline and triphenylamine-based conjugated mesoporous polymer designed by a donor-accepted approach for trifunctional electrocatalysis

Authors: Sugandha Singh, Manas K Ghorai, and Kamal K. Kar

References: Journal of Materials Chemistry A, Vol:38, pp: 20275-20856, Year:2023, ISSN 2050-7488 (print), ISSN 2050-7496 (online), Royal Society of Chemistry, UK (IF-14.551)

https://doi.org/10.1039/D3TA02847J

293. Title: Front cover for A cobalt harnessed phenanthroline and triphenylamine-based conjugated mesoporous polymer designed by a donor-accepted approach for trifunctional electrocatalysis

Authors: Sugandha Singh, Manas K Ghorai, and Kamal K. Kar

References: Journal of Materials Chemistry A, Vol:38, pp: 20275-20856, Year:2023, ISSN 2050-7488 (print), ISSN 2050-7496 (online), Royal Society of Chemistry, UK (IF-14.551)

https://doi.org/10.1039/D3TA02847J

Our article makes the front cover page in Materials Chemistry A

https://pubs.rsc.org/en/journals/journalissues/TA#!issueid=ta011038&type=current&issnprint=2050-7488

 

292. Title: Cobalt(II)-bridged triphenylamine and terpyridine-based donor-acceptor coordination polymer as an efficient trifunctional electrocatalyst

Authors: Sugandha Singh, Manas K Ghorai, and Kamal K. Kar

References: Journal of Materials Chemistry A, Vol:11, pp: 8003-8012, Year:2023, ISSN 2050-7488 (print), ISSN 2050-7496 (online), Royal Society of Chemistry, UK (IF-14.551)

https://doi.org/10.1039/D2TA08759F

291. Title: Outer Cover for Cobalt(II)-bridged triphenylamine and terpyridine-based donor-acceptor coordination polymer as an efficient trifunctional electrocatalyst

Authors: Sugandha Singh, Manas K Ghorai, and Kamal K. Kar

References: Journal of Materials Chemistry A, Vol:11, pp: 8003-8012, Year:2023, ISSN 2050-7488 (print), ISSN 2050-7496 (online), Royal Society of Chemistry, UK (IF-14.551)

https://doi.org/10.1039/D3TA90074F

Our article makes the cover page in Materials Chemistry A

 

290. Title: Triphenylamine and terpyridine-zinc (II) complex based donor-acceptor soft hybrid as a visible light-driven hydrogen evolution photocatalyst

Authors: Debabrata Samanta, Manish Kumar, Sugandha Singh, Parul Verma, Kamal K Kar, Tapas Kumar Maji, Manas K Ghorai

References: Journal of Materials Chemistry A, Vol.:8, No.42, Pages: 21968-21972, Year:2020, ISSN 2050-7488 (print), ISSN 2050-7496 (online), Royal Society of Chemistry, (IF-14.511)

https://doi.org/10.1039/D0TA02318C

289. Title:Ultra- flexible fibrous supercapacitors with carbon nanotube/polypyrrole brush-like electrodes

Authors: Jayesh Cherusseri and Kamal K. Kar

References: Journal of Materials Chemistry A, Vol.:4, No.25, Pages: 9910-9922, Year:2016, ISSN 2050-7488 (print), ISSN 2050-7496 (online), Royal Society of Chemistry, (IF-14.511)

https://doi.org/10.1039/C6TA02690G

288. Title: Effects of structural disorder and nitrogen content on ORR electrocatalytic activity of CNx synthesized by pyrolysis of polyvinylpyrrolidone

Authors: Raghunandan Sharma and Kamal K. Kar

References: Journal of Materials Chemistry A, Vol.:3, No.:22, pp: 11948-11959, Year:2015, ISSN 2050-7488 (print), ISSN 2050-7496 (online), Royal Society of Chemistry, (IF-14.511)

https://doi.org/10.1039/C5TA02097B

287. Title: Hierarchically mesoporous carbon nanopetal based electrodes for flexible supercapacitors with super-long cyclic stability

 Authors: Jayesh Cherusseri and Kamal K. Kar

References: Journal of Materials Chemistry A, Vol.:3, No:43, pp: 21586-21598, Year:2015, ISSN 2050-7488 (print), ISSN 2050-7496 (online), Royal Society of Chemistry, (IF-14.511)

https://doi.org/10.1039/C5TA05603A

286. Title: Shape depended electrochemical properties of LiNi0.5Co0.5PO4/C composites for high voltage secondary, flexible Li-ion batteries

Authors: Kiran Kumar Surthi, Kamal K Kar, Ramkumar Janakarajan

Reference: Chemical Engineering Journal, Vol. 418,  pp. 129362, Year: 2021, ISSN: 1385-8947, Elsevier,

(IF-16.744)

https://doi.org/10.1016/j.cej.2021.129362

285. Title: One-dimensional lithium ion capacitor in core-shell wire shape construction for wearable applications

Authors: Amit Yadav, and Kamal K Kar

Reference: Chemical Engineering Journal, Vol. 401, No.:X, pp. 126034, Year: 2020, ISSN: 1385-8947, Elsevier.

(IF-16.744)

https://doi.org/10.1016/j.cej.2020.126034

284. Title: Shape controlled and structurally stabilized Co-doped olivine lithium phosphate cathodes for high voltage conventional, thin and flexible Li-ion batteries

Authors: Kiran Kumar Surthi, Kamal K Kar, Ramkumar Janakarajan

Reference: Chemical Engineering Journal, Vol. 399,  pp. 125858, Year: 2020, ISSN: 1385-8947, Elsevier

(IF-16.744)

https://doi.org/10.1016/j.cej.2020.125858

283. Title: Arsenic remediation onto redox and photo-catalytic/electrocatalytic Mn-Al-Fe impregnated rGO: Sustainable aspects of sludge as supercapacitor

Authors: Yaswanth K. Penke, Amit K. Yadav, Prerna Sinha, Iram Malik, Janakarajan Ramkumar, Kamal K Kar

Reference: Chemical Engineering Journal, Vol. 390,  pp. 124000, Year: 2020, ISSN: 1385-8947, Elsevier

(IF-16.744)

https://doi.org/10.1016/j.cej.2019.124000

282. Title: Carambola-shaped SnO⁠2 wrapped in carbon nanotube network for high volumetric capacity and improved rate and cycle stability of lithium ion battery

Authors: Pallab Bhattachary, Joong Hee Lee, Kamal K. Kar, Ho Seok Park

Reference: Chemical Engineering Journal, Vol. 369,  No.:X, pp. 422-431, Year: 2019, ISSN: 1385-8947, Elsevier, (IF-16.744)

https://doi.org/10.1016/j.cej.2019.03.022

281. Title: - A review on multi-synergistic transition metal oxide systems towards arsenic treatment: Near molecular analysis of surface-complexation (synchrotron studies/modeling tools)

Authors: Yaswanth K. Penke and Kamal K Kar

Reference: Advances in Colloid and Interface Science, Vol: 314,  pp: 102859 (pages:29), Year: 2023, ISSN: 0001-8686, Elsevier B.V. (IF-15.19)

https://doi.org/10.1016/j.cis.2023.102859

280. Title: Arsenic surface complexation behavior in aqueous systems onto Al substituted Ni, Co,Mn, and Cu based ferrite nano adsorbents

Authors: Yaswanth K. Penke, Nidhi Tiwari, Shambunath Jha, Dibyendu Bhattacharyya,

Janakarajan Ramkumar, Kamal K.Kar

Reference: Journal of Hazardous Materials, Vol. 361,  pp. 383-393, Year: 2019, ISSN: 0304-3894, Elsevier B.V.(IF-14.244)

https://doi.org/10.1016/j.jhazmat.2018.07.056

279. Title: Redox synergistic Mn-Al-Fe, Cu-Al-Fe ternary metal oxide nano adsorbents for arsenic remediation with environmentally stable As(0) formation

Authors: Yaswanth K. Penke, Ganapathi Anantharaman, Janakarajan Ramkumar, Kamal K.Kar

Reference: Journal of Hazardous Materials, Vol. 364,  pp. 519-530, Year: 2019, ISSN: 0304-3894, Elsevier B.V.(IF-14.244)

https://doi.org/10.1016/j.jhazmat.2018.10.069

278. Title: Microwave as a tool for synthesis of carbon-based electrodes for energy storage

Authors: Rajesh Kumar, Sumanta Sahoo, Ednan Joanni, Rajesh K. Singh, and Kamal K. Kar

Reference: Applied Materials and Interfaces, ISSN: 1944-8244, Vol.: xx, No-x, pp.: xx, Year: 2021, ACS Publications, USA (IF-10.383)

https://doi.org/10.1021/acsami.1c15934

277. Title:Facile development strategy of a single carbon fiber based all solid state flexible lithium ion battery for wearable electronics

Authors: Amit Yadav, Bibekananda De, Sandeep K. Singh, Prerna Sinha and Kamal K Kar

Reference: Applied Materials and Interfaces, ISSN: 1944-8244, Vol.: 11, No-8, pp.: 7974-7980, Year: 2019, ACS Publications, USA (IF-10.383)

https://doi.org/10.1021/acsami.8b20233

276. Title: Hierarchical carbon nanotube coated carbon fiber: Ultra lightweight, thin and highly efficient microwave absorber

Authors: Sandeep K. Singh, M. Jaleel Akhtar, and Kamal K Kar

Reference: Applied Materials and Interfaces, ISSN: 1944-8244, Vol.: 10, No-29, pp.: 24816-24828, Year: 2018, ACS Publications, USA (IF-10.383)

https://doi.org/10.1021/acsami.8b06673

275. Title: A facile methodology for the development of a printable and flexible all-solid-state rechargeable battery

Authors: Bibekananda De, Amit Yadav, Salman Khan, and Kamal K. Kar

Reference: Applied Materials and Interfaces, ISSN: 1944-8244, Vol.: 9, No-23, pp.: 19870-19880, Year: 2017, ACS Publications, USA (IF-10.383)

https://doi.org/10.1021/acsami.7b04112

274. Title: Aluminum substituted cobalt ferrite (Co-Al-Fe) nano adsorbent for arsenic adsorption in aqueous systems and detailed redox behavior study with XPS

Authors: Yaswanth K. Penke, Ganapathi Anantharaman, Janakarajan Ramkumar, and Kamal K. Kar

Reference: Applied Materials and Interfaces, ISSN: 1944-8244, Vol.: 9, No-13, pp.: 11587-11598, Year: 2017, American Chemical Society Publications, (IF-10.383)

https://doi.org/10.1021/acsami.6b16414

273. Title: Featured article Cobalt nanoparticle-modified pi-conjugated mesoporous polymers for electrocatalysis

Authors: Sugandha Singh, Manas K. Ghorai, and Kamal K. Kar

References: ACS Applied Nano Materials, Vol:6 (15), pp:14011-14018, Year:2023, ISSN: 2574-0970, American Chemical Society (IF:6.14)

https://doi.org/10.1021/acsanm.3c01849

https://pubs.acs.org/toc/aanmf6/6/15#

Our article makes the cover page in ACS Applied Nanomaterials

272. Title: - Spherical shaped LiCo0.5Mn0.5PO4-carbon composite as high voltage cathode material for conventional and flexible Li-ion batteries

Authors: Kiran Kumar Surthi, Kamal K Kar

Reference: Carbon, Vol: 193,  pp: 140-150, Year: 2022, ISSN:0008-6223, Elsevier B.V. (IF-11.307)

https://doi.org/10.1016/j.carbon.2022.02.034

271. Title: Recent progress on carbon-based composite materials for microwave electromagnetic interference shielding

Authors: Rajesh Kumar, Sumanta Sahoo, Ednan Joanni, Rajesh Kumar Singh, Wai Kian Tan, Kamal K. Kar, Atsunori Matsuda

Reference: Carbon, Vol: 177,  pp: 304-331, Year: 2021, ISSN:0008-6223, Elsevier B.V. (IF-11.307)

https://doi.org/10.1016/j.carbon.2021.02.091

270. Title: Keratin-derived functional carbon with superior charge storage and transport for high-performance supercapacitors

Authors: Prerna Sinha, Amit Yadav, Alekha Tyagi, Pradip Paik, Hiroyuki Yokoi, Amit Naskar, Tapas Kuila, Kamal K Kar

Reference: Carbon, Vol. 168, pp. 419-438. Year: 2020, ISSN:0008-6223, Elsevier B.V., (IF-11.307) https://doi.org/10.1016/j.carbon.2020.07.007

269. Title: Helically coiled carbon nanotube electrodes for flexible supercapacitors

Authors: Jayesh Cherusseria, Raghunandan Sharma, Kamal K. Kar

References: Carbon, Vol: 105, pp 113-125, Year: 2016, ISSN:0008-6223, American Carbon Society, Elsevier B.V. (IF-11.307)

https://doi.org/10.1016/j.carbon.2016.04.019

268. Title: Effect of carbon nanotube length and density on the properties of carbon nanotube-coated carbon fiber/polyester composites

Authors: P. Agnihotri, S. Basu, KK Kar

Reference: Carbon, Vol. 49, No.:9, pp. 3098-3106. Year: 2011, ISSN:0008-6223, Elsevier B.V.

(IF-11.307)

https://doi.org/10.1016/j.carbon.2011.03.032

267. Title:Separated yet connected!!

Separated yet connected!!

The presented micrograph bagged 1^st place in MRS Spring 21 Science as Art competition. It is FESEM micrograph of atomic Ni/nickel sulphide-doped carbon material for pH-universal ORR electrocatalysis with unique porous interconnected morphology.

Image description: Our lives are highly interconnected as a virus that originated at one corner created havoc in the entire world. The COVID-19 pandemic confined us in narrow spaces (pores). Staying in touch with maintaining social distancing is important in these times to avoid anxiety and depression.The image is colored like a rainbow to represent the combined efforts of different people around the world to end this pandemic (realize white (bright) future).

266. Title: Heteroatom doping of 2D graphene materials for electromagnetic interference shielding: A review of recent progress

Authors: Rajesh Kumar, Sumanta Sahoo, Ednan Joanni, Rajesh K. Singh, Wai Kian Tan, Stanislav A. Moshkalev, Atsunori Matsuda, Kamal K. Kar

Reference: Critical Reviews in Solid State and Materials Sciences, Vol: 47(4), pp:570-619, Year: 2022, Print ISSN: 1040-8436 Online ISSN: 1547-6561 Taylor and Rrancis, (IF:11.178)

DOI:10.1080/10408436.2021.1965954

265. Title: Al3+-doped 3d-transitional metal (Mn/Cu) ferrite impregnated rGO for PEC water-splitting/supercapacitor electrode with oxygen vacancies and surface intercalation aspects

Authors:  Yaswanth K. Penke, Prerna Sinha, Amit K. Yadav, Janakarajan Ramkumar, Kamal K. Kar

Reference: Composites Part B: Engineering, ISSN: 1359-8368, Vol: 202, pp: 108431 (pages:14), Year: 2020, Elsevier B.V., UK (IF-11.322)

https://doi.org/10.1016/j.compositesb.2020.108431

264. Title: Impact of Al⁠2O⁠3, TiO⁠2, ZnO and BaTiO⁠3 on the microwave absorption properties of exfoliated graphite/epoxy composites at X-band frequencies

Authors:  Sandeep Kumar Singh, M.J. Akhtar and Kamal K. Kar

Reference: Composites Part B: Engineering, ISSN: 1359-8368, Vol: 167, pp: 135-146, Year: 2019, Elsevier B.V., UK (IF-11.322)

https://doi.org/10.1016/j.compositesb.2018.12.012

263. Title: Synthesis and characterization of elastic and macroporous chitosan-gelatin cryogels for tissue engineering

Authors: Neeraj Kathuria, Anuj Tripathi, Kamal K. Kar and Ashok Kumar

References: Acta Biomaterialia, Vol: 5(1), pp: 406-418, ISSN:1878-7568, Year: 2009, Elsevier, (IF-10.633)

https://doi.org/10.1016/j.actbio.2008.07.009

2024

262. Title: Understanding sensing mechanism of N-doped graphene-based toxic gas sensors using electronic, thermal, mechanical, electrical, and sensing properties:A DFT study

Authors: Kiran Kumar Surthi, Mamata Thak and Kamal K. Kar

References: Micro and Nanostructures, Vol: 187, pp: 207763, Year: 2024, Elsevier

https://doi.org/10.1016/j.micrna.2024.207763

261. Title: Zingiber officinale-assisted graphene oxide green reduction for excellent photocatalysis

      Authors: P. Saini, Pankaj Chamoli, Ravi K. Shukla, Kamal K. Kar and K. K. Raina.

References: Current Materials Science, Vol:8, PP: xxxx, 2023, ISSN (Print): 2666-1454, ISSN (Online): 2666-1462, Bentham Science

https://dx.doi.org/10.2174/0124054615240655231017062223

260. Title: Starch/methyl cellulose-based microsupercapacitors for on-chip applications

Authors: Ravi Nigam and Kamal K. Kar

Reference: Journal of Materials Science: Materials in Electronics, Vol.: 34, pp: 1927 (19), Electronic ISSN 1573-482X, Print ISSN 0957-4522, Year: 2023, Publisher: Springer (IF:2.8)

https://doi.org/10.1007/s10854-023-11296-8

259. Title: Development and characterization of fly ash-ground tire rubber-based abrasive flow finishing media and its performance assessment

Authors: Irfan Ahmad Ansari, Kamal K Kar, and J. Ramkumar

Reference: Journal of the Brazilian Society of Mechanical Sciences and Engineering, Vol.: 46:179, pp: 19,

Electronic ISSN 1806-3691, Print ISSN 1678-5878ISSN: 1087-1357, Year: 2024, Publisher: Springer (IF:2.2)

https://doi.org/10.1007/s40430-024-04753-w

 

-Static and dynamic mechanical properties of fly ash cenosphere filled polyester resin

-Static and dynamic mechanical properties of fly ash cenosphere filled polyethylene

-A Brief Review on Electro-chemical/kinetic Electrode Materials towards Per-/Poly-fluoroalkyl Substances (PFASs) Degradation and Treatment: Mechanistic Pathways-Parameters

-Effect of processing route, doping in crystal structure, microstructure and dielectric behavior of calcium copper titanate (CCTO) for use as a charge storage devices

-Development of novel low-cost sustainable AFF medium from recycled waste rubber and its performance evaluation

-A comparative study of different window layers in Cu2ZnSnSe4 (CZTSe) kesterite-based thin films for solar cell application via SCAPS

- Ramifications of Vorticity on Aggregation and Activation of Platelets in mono-Leaflet Mechanical Heart Valve: Fluid-Structure-Interaction Study

- Ramifications of Vorticity on Aggregation and Activation of Platelets in tri-Leaflet Mechanical Heart Valve: Fluid-Structure-Interaction Study

- Simulation study of electric double layer capacitance of ordered carbon electrodes

-Polymer Electrolyte Membranes: Challenges, Materials, and Fundamental Research towards the search of an Alternative to Nafion

-Recent advancement of supercapacitors: A current era of supercapacitor devices through the development of electrical double layer, pseudo and their hybrid supercapacitor electrodes

- All solid state hybrid lithium ion battery Supercapictor in core-shell wire shape construction for safe operation in wearable applications

-Effect of pore forming agents on sulfonated polyether ether ketone (SPEEK) membrane for polymer electrolyte membrane fuel cell applications

To be updated soon

2023

256. Title: Enhanced performance with ionic and organic redox-couple electrolytes on MTMO anchored CQD nanocomposites and renewable carbon-based asymmetric flexible supercapacitor

Authors: Prerna Sinha and Kamal K Kar

Reference: Applied Materials Today, Vol: 32, pp: 101806 (17). Year: 2023, ISSN:2352-0407, Elsevier B.V. (IF-8.663)

https://doi.org/10.1016/j.apmt.2023.101806

255. Title: Development of novel low-cost sustainable abrasive flow finishing media from ground tire rubber and its performance evaluation

Authors: Irfan Ahmad Ansari, Kamal K Kar, and J. Ramkumar

Reference: Transations of the ASME, Journal of Manufacturing Science and Engineering, Vol.: 135(4), pp: 041002 (pp:11), ISSN: 1087-1357, Year: 2023, Publisher: ASME, The American Society of Mechanical Engineers (IF:3.952)

https://doi.org/10.1115/1.4055963

 254. Title: Anti-bacterial and arsenic remediation insights in aqueous systems onto heterogeneous metal oxide (Cu0.52Al0.1Fe0.47O4)/rGO Hybrid: An Approach towards Airborne Microbial Degradation

Authors: Yaswanth. K. Penke, Prem A. Murugan, Iram Malik, Saravanan Matheshwaran, Janakarajan Ramkumar, and Kamal. K. Kar

Reference: Environmental Science and Pollution Research (ESPR), Electronic ISSN: 1614-7499, Vol.: 30, pp.: 811-822, Year: 2023, Springer-Verlag GmbH Germany, part of Springer Nature (IF: 5.190)

https://doi.org/10.1007/s11356-022-22169-8

253. Title: Flexible, stretchable, and thin films based on functionalized carbon nanofiber/graphene nanostructures for electromagnetic interference shielding

Authors: Jitendra Tahalyani, M. Jaleel Akhtar and Kamal K. Kar

References: ACS Applied Nano Materials, Vol:x, pp:xx, Year:2023, ISSN: 2574-0970, American Chemical Society (IF:6.14)

https://doi.org/10.1021/acsanm.3c00215

252. Title: Cobalt nanoparticle-modified pi-conjugated mesoporous polymers for electrocatalysis

Authors: Sugandha Singh, Manas K. Ghorai, and Kamal K. Kar

References: ACS Applied Nano Materials, Vol:6 (15), pp:14011-14018, Year:2023, ISSN: 2574-0970, American Chemical Society (IF:6.14)

https://doi.org/10.1021/acsanm.3c01849

251. Title: Flexible, stretchable, and ultra-light hierarchical carbon-nanotube-decorated carbon fiber structures for microwave absorber application

Authors: Jitendra Tahalyani, M. Jaleel Akhtar and Kamal K. Kar

References: ACS Applied Nano Materials, Vol:x, pp:xx, Year:2023, ISSN: 2574-0970, American Chemical Society (IF:6.14)

https://doi.org/10.1021/acsanm.3c01746

250. Title: Effect of ground tire rubber media's viscoelasticity and flow passage geometry on the abrasive flow finishing of helical gear

Authors: Irfan Ahmad Ansari, Kamal K Kar, and J. Ramkumar

Reference: Journal of Manufacturing Processes, Vol.: 101, pp: 219-233, ISSN: 1087-1357, Year: 2023, Publisher: Elsevier (IF:5.684)

https://doi.org/10.1016/j.jmapro.2023.06.012

249. Title: Effect of simple cubic-, face-centered cubic-, and body-centered cubic- electrodes on the electric double layer capacitance of supercapacitors

Authors: Ravi Nigam, Kamal K. Kar

References: Nanotechnology, Vol.:34, No:46, pp: 465405, Year:2023, Print: ISSN: 13616528, Online ISSN: 09574484, Institute of Physics Publishing (IOP), UK, (IF:3.5)

DOI 10.1088/1361-6528/acf04d

248. Title: Real-time hybrid simulation at the pseudo-dynamic testing facility at IIT Kanpur

Authors: Hironmoy Kakoty, Chinmoy Kolay, Shubham Raj, and Kamal K. Kar

Reference: Current Science, Vol: 125 (6), pp 685-691, Year: 2023, ISSN:0011-3891, Accession Number: 2006:686703 CAN147:10783, Current Science Association

doi: 10.18520/cs/v125/i6/685-691

247. Title: Starch/methyl cellulose-based microsupercapacitors for on-chip applications

Authors: Ravi Nigam and Kamal K. Kar

Reference: Journal of Materials Science: Materials in Electronics, Vol.: 34, pp: 1927 (19), Electronic ISSN 1573-482X, Print ISSN 0957-4522, Year: 2023, Publisher: Springer (IF:2.8)

https://doi.org/10.1007/s10854-023-11296-8

 

2022

246. Title: A flexible, redox-active, aqueous electrolyte-based asymmetric supercapacitor with high energy density based on keratin-derived renewable carbon

Authors: Prerna Sinha, Kamal K. Kar, and Amit K. Naskar

Reference: Advanced Materials Technologies, Online ISSN: 2365-709X, Vol.: 07(11), pp.: 2200133, Year: 2022, Wiley-VCH GmbH, Weinheim (IF: 8.856)

https://doi.org/10.1002/admt.202200133

245. Title: Proliferation of pH-universal oxygen reduction performance by morphology modulation in NiS-N,S doped carbon microflowers

Authors: Alekha Tyagi and Kamal K. Kar

References: Materials Today Sustainability, Vol.:17, pp: 100093, Year:2022, ISSN 2589-2347, Elsevier (IF: 7.244), https://doi.org/10.1016/j.mtsust.2021.100093

244. Title: Exploring the electrical behavior of iodine substituted CaCu3Ti4O12-xIx   by impedance and modulus spectroscopy

Authors: Bhoomika Yadav, Prerna Sinha, Kamal K. Kar, Manas K. Ghorai and  Devendra Kumar

Reference: Journal of Physics and Chemistry of Solids, ISSN: 0022-3697 (online), Vol.: 164, pp.: 110613 (pages:19), Year: 2022, Elsevier (IF: 4.383)

https://doi.org/10.1016/j.jpcs.2022.110613

243. Title: Impact of defect migration on electrical and dielectric properties in molten salt synthesized CaCu3Ti4O12 and customizing the properties by compositional engineering with Mg doping

Authors: Bhoomika Yadav,  Kamal K. Kar, Manas K. Ghorai, Devendra Kumar, and Dharmendra Yadav

Reference: Materials Chemistry and Physics, Vol.281, pp.:125893 (pages:15), Year:2022, ISSN: 0254-0584, Elsevier B.V., (IF: 4.778)

https://doi.org/10.1016/j.matchemphys.2022.125893

242. Title: Mesoporous electrode from human hair  and bio-based gel polymer  electrolyte  for high-performance supercapacitor

Authors: Kapil Dev Verma, Prerna Sinha, Manas K. Ghorai, and Kamal K. Kar

Reference: Diamond and Related Materials, ISSN: 0925-9635, Vol.: 123, pp.: 108879 (pages:12+E), Year: 2022, Elsevier (IF: 3.806)

https://doi.org/10.1016/j.diamond.2022.108879

241. Title: Facile synthesis of Al substituted Cu-Ferrite infused Reduced Graphene Oxide (rGO) nanohybrid for improving microwave absorption at gigahertz frequencies

Authors:Sandeep Kumar Singh, Yawanth K. Penke, J. Ramkumar, M. J. Akhtar, and Kamal K. Kar

References: J of Alloys and Compounds, ISSN: 0928-8388, Vol.: 901, pp.: 163659, Year: 2022, Elsevier Science Ltd., Elsevier B.V., UK, (IF: 6.371)

https://doi.org/10.1016/j.jallcom.2022.163659

240. Title: Graphene nanoplatelets-based lightweight flexible nanocomposites for EMI shielding application

Authors: Jitendra Tahalyani, M. Jaleel Akhtara Kamal K. Kar

Reference: IEEE Transactions on Electromagnetic Compatibility, Print ISSN: 0018-9375, Online ISSN: 1558-187X, Vol.: 64(5),  pp.: 1674-1682, IEEE-Xplore, Year: 2022, (IF:2.036)

doi: 10.1109/TEMC.2022.3198646

239. Title: Simulation study of electric double-layer capacitance of ordered carbon electrodes

Authors:     Ravi Nigam, Kamal K. Kar

Reference: Langmuir, ISSN: 0743-7463 (print); 1520-5827 (web), Vol.: 38, pp.: 12235-12247, Year: 2022, American Chemical Society (IF: 4.331)

 https://doi.org/10.1021/acs.langmuir.2c01865

238. Title: Flexible, stretchable and lightweight polyurethane and graphene nanoplatelets nanocomposite for high performance EMI shielding application

Authors: Jitendra Tahalyani, M. Jaleel Akhtara Kamal K. Kar

Reference: Materials Today Communications, ISSN: 2352-4928, Vol.: 33, pp.: 104586 (pp:11), Year: 2022, Elsevier, (IF:3.662)

https://doi.org/10.1016/j.mtcomm.2022.104586

237. Title: A flexible and high energy density -hydrous RuO2 and keratin-derived renewable carbon composite-based asymmetric supercapacitor in redox-mediated electrolytes

Authors: Prerna Sinha and Kamal K. Kar

Reference: Electrochimica Acta, International Society of Electrochemistry, Vol:435, pp:141368 (pp:18), Year:2022, ISSN: 0013-4686, Elsevier B.V., UK (IF: 7.336)

https://doi.org/10.1016/j.electacta.2022.141368

236. Title: Exploring the dielectric and conduction characteristics of iodine substituted CaCu3Ti4O12Ix

Authors: Bhoomika Yadav, Kamal K. Kar, Manas K. Ghorai, and Devendra Kumar

Reference: Ceramics International, Vol: 49, No.:4, pp: 26932-6945; Year:2022, Online ISSN: 0272-8842, Elsevier B.V. (IF: 5.532)

https://doi.org/10.1016/j.ceramint.2022.10.289

235. Title: Value-added functional carbon for potential electrodes and its validation

Authors: Prerna Sinha, Mukesh Kumar, Ravi Nigam, Hiroyuki Yokoi, and Kamal K. Kar

References: Journal of Energy Storage Vol.:56, pp: 106116(pp:20), Year:2022, ISSN: 2352-152X, Elsevier,

(IF-8.907),

https://doi.org/10.1016/j.est.2022.106116

234. Title: Per-/poly-fluoroalkyl substances (PFASs) treatment and mechanistic insights: Photo-catalyst and photo-electro-catalyst materials application

Authors: Yaswanth K. Penke and Kamal K. Kar

Reference: Year: 2022, https://chemrxiv.org

10.26434/chemrxiv-2022-rljqn

233. Title: Design and development of carbon nanofiber based lightweight flexible nanocomposite structure for EMI shielding application

Authors: Jitendra Tahalyani, M. Jaleel Akhtar, Kamal K. Kar, and Vishal Kumar Chakradhary

References: IEEE Microwaves, Antennas, and Propagation Conference (MAPCON), Bangalore, India, pp. 1228-1233, Year: 2022, IEEE

https://doi.org/10.1109/MAPCON56011.2022.10047143

232. Title: Ni-Co oxide anchored carbon dots for high-performance asymmetric supercapacitor

Authors: Prerna Sinha and Kamal K Kar

Reference: Energy Proceedings, Bind:2004, Sider: 2965. Year: 2022, ISSN:2004-2965, (IF-)

 

2021 

231. Title: Acid-directed preparation of micro/mesoporous heteroatom doped defective graphitic carbon as bifunctional electroactive material: Evaluation of trace metal impurity

Authors: Alekha Tyagi, Prerna Sinha, Kamal K. Kar, and Hiroyuki Yokoi

Reference: Journal of Colloid and Interface Science, ISSN: 0021-9797, Vol.: 604, pp.: 227-238, Year: 2021, Elsevier (IF: 9.965)

https://doi.org/10.1016/j.jcis.2021.07.020

230. Title: Insights of arsenic (III/V) adsorption and electrosorption mechanism onto multi-synergistic (redox-photoelectrochemical-ROS) aluminium substituted copper ferrite impregnated rGO

Authors: YK Penke, AK Yadav, I Malik, A Tyagi, J Ramkumar, KK Kar

References: Chemosphere, Volume: 267, No.xx, pp 129346 (pages:11), Year: 2021, eISSN: xxxx, ISSN: 0045-6535, Elsevier (IF: 8.943)

https://doi.org/10.1016/j.chemosphere.2020.129246

229. Title: Microwave-assisted thin reduced graphene oxide-cobalt oxide nanoparticles as hybrids for electrode materials in supercapacitor

Authors: Rajesh Kumar, Sumanta Sahoo, Wai Kian Tan, Go Kawamura, Atsunori Matsuda, Kamal K Kar

References: Journal of Energy Storage Vol.:40, Pages: 102724 (pp:9), Year:2021, ISSN: 2352-152X, Elsevier,

(IF-8.907), https://doi.org/10.1016/j.est.2021.102724

228. Title: Microwave-assisted rapid synthesis of honeycomb core-ZnO tetrapods nanocomposites for excellent photocatalytic activity against different organic dyes

Authors: Pankaj Chamoli, Ravi K. Shukla, Achintya N. Bezbaruah, Kamal K. Kar, K.K. Raina

Reference: Applied Surface Science, ISSN: 0169-4332 (print), ISSN: 1941-0085 (online), Vol.: 555, pp.: 149663 (12 pages), Year: 2021, Elsevier (IF: 7.392)

 https://doi.org/10.1016/j.apsusc.2021.149663

227. Title:Heterolayered composite of carbon nanofibers sandwiched between polyethylene terephthalate and polyurethane for flexible electromagnetic shielding application

Authors: Jitendra Tahalyani, M. Jaleel Akhtara Kamal K. Kar

References: ACS Applied Nano Materials, Vol:4, pp:12146-12157, Year:2021, ISSN: 2574-0970, American Chemical Society (IF:6.140)

https://doi.org/10.1021/acsanm.1c02657

226. Title: Hierarchical epoxy based composites prepared by chemical vapor deposition of carbon nanocoils on

glass fibers

Authors: A. Rahaman and Kamal K. Kar

Reference: Composite Interface, Vol: 29, No: 06, pp:643-658, Year:2021, ISSN:0927-6440 (Print), 1568-5543 (Online), Taylor & Francis (IF:2.839)

https://doi.org/10.1080/09276440.2021.1990484

225. Title: Rapid microwave growth of mesoporous TiO2 nano-tripods for efficient photocatalysis and adsorption

Authors: Pankaj Chamoli1, Ravi K. Shukla, Achintya N. Bezbaruah, Kamal K. Kar, and K. K. Raina

Reference: Journal of Applied Physics, Vol: 130,  Page: 164901-1-164901-13; Year:2021, ISSN: 0021-8979, E-ISSN: 1089-7550, American Institute of Physics (IF: 2.877)

https://doi.org/10.1063/5.0062383

224. Title: Investigation of precision finishing of helical gears using newly developed silicon carbide mixed styrene butadiene media and abrasive flow finishing process

Authors: Irfan A. Ansari, Dipti Sharma, Kamal K. Kar and Janakarajan Ramkumar

Reference: Current Nanomaterials 2021; 6(2), Print ISSN: 2405-4615, Online ISSN: 2405-4623, Bantham Science Publisher

 https://doi.org/10.2174/2405461506666210208124353

223. Title: Numerically investigating the AZO/Cu2O heterojunction solar cell using ZnO/CdS buffer layer

Authors: Daniel A. Fentahun, Alekha Tyagi, and Kamal K. Kar

References:Optik (International Journal for Light and Electron Optics), ISSN: 0030-4026, Vol.:228, No. XX, pp.166228 (12 pages), Year:2021, Elsevier B.V. (IF-2.840)

https://doi.org/10.1016/j.ijleo.2020.166228

222. Title: Superior electrical, mechanical and viscoelastic properties of CNTs coated carbon textile reinforced phenolic composite for high-performance structural applications

Authors: Ravindra Kumar, Kamal K. Kar, and Kinshuk Dasgupta

References: Journal of Applied Polymer Science, ISSN:0021-8995, Vol.: 138, No.: 10, pp.: 49968, Year: 2021, John Wiley & Sons, Inc. (IF:3.057)

https://doi.org/10.1002/app.49968

221. Title: First principle study on lithium-ion diffusion, electronic and electrochemical properties of cobalt doped lithium metal borates

Authors: Kiran Kumar Surthi, Alekha Tyagi, Kamal K. Kar, Ramkumar Janakarajan

Reference: Journal of Physics and Chemistry of Solids, ISSN: 0022-3697 (online), Vol.: 148, pp.: 109779 (pages:12), Year: 2021, Elsevier (IF: 4.383)

https://doi.org/10.1016/j.jpcs.2020.109779

220. Title: Enhanced electrical, mechanical, and viscoelastic properties of carbon-carbon composites using carbon nanotubes coated carbon textile as reinforcement

Authors: Ravindra Kumar, Kamal K Kar,Kinshuk Dasgupta

References: Journal of Composite Materials, Volume: xx, No.xx, pp xx, Year: 2021, eISSN: 1530793X, ISSN: 00219983,  Sage Publications Ltd. UK and The American Society for Composites (IF: 3.191)

https://doi.org/10.1177/0021998320978517

219. Title: Rheological characterization of newly developed fly-ash mixed polymeric media and its finishing performance through abrasive flow machining

Authors:  Gopal A. Gupta, Irfan Ahmad Ansari, J. Ramkumar, and Kamal K Kar

Reference: Cleaner Engineering and Technology, ISSN: 2666-7908, Vol: 2, pp: 100085 (16 pages+SI), Year: 2021, Elsevier B.V., UK (IF-,)

https://doi.org/10.1016/j.clet.2021.100085

218. Title: ORR performance evaluation of Al-substituted MnFe2O4/reduced graphene oxide nanocomposite

Authors:  Alekha Tyagi,  Yaswanth K. Penke, Prerna Sinha, Iram Malik, Kamal K. Kar, Janakarajan Ramkumar, Hiroyuki Yokoi

Reference: International Journal of Hydrogen Energy, ISSN: 0360-3199, Vol.: 46, Issue: 43, pp: 22434-22445, Year: 2021, Elsevier B.V., UK (IF-7.139)

https://doi.org/10.1016/j.ijhydene.2021.04.074

 

 

2020

(217) Title:Nanocellulose as a sustainable material for water purification

Authors: Sandeep Ahankari, Thomas George, Aditya Subhedar, and Kamal K. Kar

Reference: SPE Polymers, Online ISSN:2690-3857,  Vol: 1, No.:2, pp.: 69-80, Year: 2020, Wiley

https://doi.org/10.1002/pls2.10019

(216) Title: Atomically dispersed Ni/NixSy anchored on doped mesoporous networked carbon framework: Boosting the ORR performance in alkaline and acidic media

Authors: Alekha Tyagi, Kamal K. Kar, Hiroyuki Yokoi

Reference: Journal of Colloid & Interface Science, ISSN: 0021-9797, Vol.: 571, pp.: 285-296, Year: 2020, Elsevier (Impact factor: 6.361)

https://doi.org/10.1016/j.jcis.2020.03.043

(215) Title: Enhanced thermoelectric performance of n-type Bi2Te3 alloyed with low cost and highly abundant sulfur

Authors: Iram Malik, Tulika Srivastava, Kiran Kumar Surthi, Chhatrasal Gayner, Kamal K. Kar

References: Materials Chemistry and Physics, Vol.255, pp.:123598 (pages:9), Year:2020, ISSN: 0254-0584, Elsevier B.V., (Impact factor: 3.408)

https://doi.org/10.1016/j.matchemphys.2020.123598

(214) Accepted

(213) Title: Nanocellulose-based polymer composites for energy applications-A review

Authors: Dylan Lasrado, Sandeep Ahankari and  Kamal Kar

References: J. of Applied Polymer Science, ISSN:0021-8995, Vol.: 137, No.: 27, pp.: 48959 (pages:14), Year: 2020, John Wiley & Sons, Inc.

https://doi.org/10.1002/app.48959

(212) Title: Impact of graphite on thermomechanical, mechanical, thermal, electrical properties, and thermal conductivity of HDPE/Copper composites

Authors: S Banerjee, S Pattnayek, R Kumar, Kamal K. Kar

Reference: Fuel Cells, Vol.: 20, No.: 2, pp 116-130, Year: 2020, ISSN: 1615-6854, WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim (Impact factor 2.33)

https://doi.org/10.1002/fuce.201900004

(211) Title: Catalytic activity of surface functionalized nanoscale nickel-zinc multiferrites: potential vector for water purification

Authors: Ruchika Tanwar, Ritu Kumari, Uttam K. Mandal, Kamal K. Kar

Reference: Journal of Chemical Technology & Biotechnology, ISSN: 0268-2575 (print); 1097-4660 (web), Vol.: 95, No.:3, pp.: 739-750, Year: 2020, John Wiley & Sons, Ltd (IF: 2.659)

https://doi.org/10.1002/jctb.6259

(210) Title: Urea and cow urine-based green approach to fabricate graphene-based transparent conductive films with high conductivity and transparency

Authors: Pankaj Chamoli, Tulika Srivastava, Alekha Tyagi, K.K. Raina, Kamal K Kar

References: Materials Chemistry and Physics, Vol.:242, pp.: 122465 (15 pages), Year:2020, ISSN: 0254-0584, Elsevier B.V., (Impact factor: 2.781)

https://doi.org/10.1016/j.matchemphys.2019.122465

(209) Title: Study of matrix-filler interaction through correlations between structural and viscoelastic properties of carbonous-filler/polymer-matrix composites

Authors: Alok Kumar Pandey, Tanvi Pal, Raghunandan Sharma, Kamal K. Kar

References: J. of Applied Polymer Science, ISSN:0021-8995, Vol.: 137, No. 27, pp.: 48660 (16 pages), Year: 2020, John Wiley & Sons, Inc.

https://doi.org/10.1002/app.48660

(208) Title: Preface to the special issue in honor of Professor Anil K. Bhowmick on the occasion of his 65th birthday

Authors: Kamal K. Kar, Sudip Ray, Mousumi De Sarkar

Reference: Journal of Applied Polymer Science, Print ISSN: 0021-8995, Online ISSN: 1097-4628  Vol.: 137, No.:27, pp.:49304, Year: 2020, John Wiley & Sons, Inc.

https://doi.org/10.1002/app.49304

(207) Title: Fabrication of Al-Si controlled expansion alloys by unique combination of pressureless sintering and hot forging

Authors: Eshan Saraswat, H.S. Maharana, S.V.S. Narayana Murty, S. Shekhar, Kamal K. Kar, J. Ramkumar, K. Mondal

Reference: Advanced Powder Technology, Vol.: 31, No.:7, pp.:2820-2832, Year:2020, Elsevier, ISSN: 0921-8831.

https://doi.org/10.1016/j.apt.2020.05.007

(206) Title: Synthesis of lightweight nanocomposite based on polyaniline 3D hollow spheres integrated milled carbon fibers for efficient X band microwave absorption

Authors: Sandeep Kumar Singh, Mohammad Jaleel Akhtar, Kamal K Kar

Reference: Industrial & Engineering Chemistry Research, Vol.: 59, No.: 19, pp.: 9067-9084, Year:2020, American Chemical Society, Print Edition ISSN: 0888-5885, Web Edition ISSN: 1520-5045.

https://doi.org/10.1021/acs.iecr.0c00223

2019

(205) Title: Chicken feather rachis: An improvement over feather fiber derived electrocatalyst for oxygen electroreduction

Authors: Alekha Tyagi, Amit Yadav, Prerna Sinha, Shashank Singh, Pradip Paik and Kamal K. Kar

Reference: Applied Surface Science, ISSN: 0169-4332 (print), ISSN: 1941-0085 (online), Vol.: 495, pp.: 143603 (14 pages), Year: 2019, Elsevier (IF: 5.155)

 https://doi.org/10.1016/j.apsusc.2019.143603

(204) Title: Design of ZnO/N-doped graphene nanohybrid incorporated RF complementary split ring resonator sensor for ammonia gas detection

Authors: Sandeep K. Singh, Nilesh K Tiwari, Amit K. Yadav, M. Jaleel Akhtar, and Kamal K. Kar

Reference: IEEE Sensors Journal, (Print ISSN: 1530-437X, Online ISSN: 1558-1748), Vol.: 19, No. 18, pp.: 7968 - 7975, Year: 2019, IEEE Sensors, (Impact factor: 2.617)

DOI: 10.1109/JSEN.2019.2918304

(203) Title: Biowaste derived activated carbon electrocatalyst for oxygen reduction reaction: Effect of chemical activation

Authors:  Alekha Tyagi, Soma Banerjee, Shashank Singh and Kamal K. Kar

Reference: International Journal of Hydrogen Energy, ISSN: 0360-3199, Vol.: 45, No. 34, pp.: 16930-16943, Year: 2019, Elsevier Science Ltd., Elsevier B.V., UK (IF-4.084 (2018)

https://doi.org/10.1016/j.ijhydene.2019.06.195

(202) Title: Enhanced microwave sintering characteristics, electrical and thermal properties of nano Li2TiO3 ceramic and its nanocomposite using LiNi0.5Co0.5PO4 as high-capacity cathode for Li-ion batteries

Authors: Kiran Kumar Surthi, Kamal K. Kara and Ramkumar Janakarajan

Reference: Journal of Physics and Chemistry of Solids, ISSN: 0022-3697 (online), Vol.: 135, pp.: 109099 (13 pages), Year: 2019, Elsevier (IF: 2.752)

https://doi.org/10.1016/j.jpcs.2019.109099

(201) Title: Dynamic mechanical properties of zinc oxide reinforced linear low density polyethylene composites

Authors: Abhimanyu Tharayil, Soma Banerjee,  Kamal K. Kar

Reference: Materials Research Express, ISSN: 2053-1591, Vol.: 6, No. 5, pp.: 055301, Year: 2019, DOI: Institute of Physics Publishing Ltd, UK (Impact factor: 0.99)

https://doi.org/10.1088/2053-1591/aaff8b

(200) Title: Prediction of material properties by 2-D numerical simulation of carbonization process of carbon-carbon composites

Authors: Ravindra Kumar, N. L. Ravikumar, Chinmay Pandya, Kamal K Kar and Kinshuk Dasgupta

Reference: SN Applied Sciences, ISSN: 2523-3963 (Print) 2523-3971 (Online), Vol.: 1, No. 6, pp.: 593, Year: 2019, Springer Nature, Switzerland AG

https://doi.org/10.1007/s42452-019-0614-1

(199) Title: Fabrication and characterization of eco-friendly human-hair derived porous carbon filled carbon fabric reinforced polymer composites

Authors: Ravindra Kumar, Suyash Varshney, Kamal K. Kar and Kinshuk Dasgupta

Reference: Polymer Composites, Vol.:40(S2), No:S2, Pages: E1573-E1587, Year:2019, DOI: 10.1002/pc.25078, Print: ISSN: 02728397, Online ISSN: 1548-0569, John Wiley and Sons Inc., Society of Plastic Engineers, USA  (Impact factor: 1.943)

https://doi.org/10.1002/pc.25078

(198) Title: Investigation of carbon nanofiber coated carbon fibers based flexible and lightweight composites for microwave absorption

Authors: Jitendra Tahalyani, M Jaleel Akhtar, Kamal K Kar

Reference: 2019 IEEE Asia-Pacific Microwave Conference (APMC), Pages: 838-840, Year:2019, Publisher: IEEE,  Electronic ISBN:978-1-7281-3517-5, USB ISBN:978-1-7281-3516-8, PrintonDemand(PoD) ISBN:978-1-7281-3518-2

doi:10.1109/APMC46564.2019.9038298

2018

(197) Title: Lightweight and high performance microwave absorbing heteroatom doped carbon derived from chicken featherfibers

Authors: Sandeep Kumar Singh, Hari Prakash, M. J. Akhtar and  Kamal K. Kar

Reference: ACS Sustainable Chemistry & Engineering, Vol: 6, No.:4, Page: 5381-5393; Year:2018, Online ISSN: 2168-0485, American Chemical Society, (Impact factor: 6.140)

https://doi.org/10.1021/acssuschemeng.8b00183

(196) Title: Microwave-assisted synthesis of palladium nanoparticles intercalated nitrogen doped reduced graphene oxide and their electrocatalytic activity for direct-ethanol fuel cells

Authors:  Rajesh Kumar, E.T.S.G. da Silva, R.K. Singh, R. Savu, A.V. Alaferdov, L.C. Fonseca, L.C. Carossi, A. Singh, S. Khandka, K.K. Kar, O.L. Alves, L.T. Kubota, S.A. Moshkalev

Reference: Journal of Colloid and Interface Science, ISSN: 0021-9797, Vol.: 515, pp.: 160-171, Year: 2018, Elsevier (Impact factor: 5.091)

https://doi.org/10.1016/j.jcis.2018.01.028

(195) Title: Recent progress and futuristic development of PbSe thermoelectric materials and devices

Authors: Chhatrasal Gayner, Kamal K. Kar and Woochul Kim

Reference: Materials Today Energy, Vol: 9, Page: 359-376; Year:2018, Online ISSN: 0272-8842, Elsevier B.V.

https://doi.org/10.1016/j.mtener.2018.06.010

(194) Title: Graphene oxide (rGO)-metal oxide (TiO2/Fe3O4) based nanocomposites for the removal of methylene blue

Authors: Soma Banerjee, P. Benjwal, Milan Singh, and Kamal K. Kar

Reference: Applied Surface Science, ISSN: 0169-4332 (print), ISSN: 1941-0085 (online), Vol.: 439, pp.: 560-568, Year: 2018, Elsevier (Impact factor: 4.4)

https://doi.org/10.1016/j.apsusc.2018.01.085

(193) Title: 1-D and 2-D morphology of metal cation co-doped (Zn, Mn) TiO2 and investigation of their photocatalytic activity

Authors: Poonam Benjwala, Bibekananda Deb, and Kamal K. Kar

Reference: Applied Surface Science, ISSN: 0169-4332 (print), ISSN: 1941-0085 (online), Vol.: 427, Part B, pp.: 262-272, Year: 2018, DOI: 10.1016/j.apsusc.2017.08.226, Elsevier

(Impact factor: 4.4)

https://doi.org/10.1016/j.apsusc.2017.08.226

(192) Title: Nitrogen doped graphene nanosheet-epoxy nanocomposite for excellent microwave absorption

Authors:P. Chamoli, S.K. Singh, M.J. Akhtar, M.K. Das and Kamal K. Kar

Reference: Physica E: Low-dimensional Systems and Nanostructures, ISSN: 1386-9477, Vol.: 103, pp.: 25-34, Year: 2018, Elsevier Science Ltd., Elsevier B.V., UK (Impact factor: 2.399)

https://doi.org/10.1016/j.physe.2018.05.020

(191) Title: Synthesis and thermoelectric performance of titanium diboride and its composites with lead selenide and carbon

Authors: I. Malik, S. Banerjee, C. Gayner, A. Chowdhuri, and Kamal K. Kar

Reference: Ceramics International, Vol: 44, No.:9, pp: 10685-10692; Year:2018, Online ISSN: 0272-8842, Elsevier B.V. (Impact factor: 2.986)

https://doi.org/10.1016/j.ceramint.2018.03.100

 (190) Title: Study on dielectric properties of synthesized exfoliated graphitereinforced epoxy composites for microwave processing

Authors: Ranu Pal, M.J Akhtar and Kamal K. Kar

Reference: Polymer Testing, ISSN: ISSN: 0142-9418, Vol.: 70, pp.: 8-17, Year: 2018, Elsevier Science Ltd., Elsevier B.V., UK (Impact factor: 2.688)

https://doi.org/10.1016/j.polymertesting.2018.06.011

(189) Title: Enhanced thermo-mechanical and electrical properties of carbon-carbon composites using human hair derived carbon powder as reinforcing filler

Authors: Ravindra Kumar, S. Varshney, Kamal K. Kar and K. Dasgupta

Reference: Advanced Powder Technology, ISSN: 09218831, Vol.: 29, No.:6, pp.: 1417-1432, Year: 2017, Elsevier Science Ltd., Elsevier B.V., UK (Impact factor: 2.414)

https://doi.org/10.1016/j.apt.2018.03.004

(188) Title: Microwave assisted curing of silicon carbide reinforced epoxy composites: Role of dielectric properties

Authors: Ranu Pal, M.J Akhtar, and Kamal K. Kar

Reference: JOM (Metal and Polymer Matrix Composites) (The Journal of The Minerals, Metals & Materials Society (TMS)), Vol: 70(7), Page: 1295-1301; Year: 2018, ISSN: 1047-4838 (print version), ISSN: 1543-1851 (electronic version), Springer (Impact factor: 1.860)

https://doi.org/10.1007/s11837-018-2855-7

(187) Title: Enhancing surface reactivity of zigzag boron nitride nano ribbons by chlorine gas decoration: A computational study

Authors: Kiran Kumar Surthi, Bibekananda De, J. Ramkumar, Kamal K. Kar

Reference: Journal of Physics and Chemistry of Solids, ISSN: 0022-3697 (online), Vol.: 120, pp.: 34-43, Year: 2018, Elsevier (Impact factor: 2.059)

https://doi.org/10.1016/j.jpcs.2018.04.021

(186) Title: Urea-assisted low temperature green synthesis of graphene nanosheets for transparent conducting film

Authors: Pankaj Chamoli, Malay K. Das and Kamal K. Kar

Reference: Journal of Physics and Chemistry of Solids, ISSN: 0022-3697 (online), Vol.: 113, pp.: 17-25, Year: 2018, Elsevier (Impact factor: 2.059)

https://doi.org/10.1016/j.jpcs.2017.10.001

(185) Title: Static and dynamic mechanical analysis of graphite flake filled phenolic-carbon fabric composites and their correlation with interfacial interaction parameters

Authors: Ravindra Kumar, Kamal K. Kar and Kinshuk Dasgupta

Reference: Reference: Polymer Engineering and Science, Vol: 58, No. 11, Page: 1987-1998; Year:2018, Print ISSN: 0032-3888, Online ISSN: 1548-2634, Wiley, Society of Plastics Engineers (Impact factor: 1.449)

https://doi.org/10.1002/pen.24809

(184) Title: Improved methanol detection using carbon nanotube-coated carbon fibers integrated with a split-ring resonator-based microwave sensor

Authors: Sandeep Kumar Singh, Prakrati Azad, M. J. Akhtar, and Kamal K Kar

References: ACS Appl. Nano Mater, Vol:1, No. 9, pp:4746-4755, Year:2018, ISSN: 2574-0970, American Chemical Society

https://doi.org/10.1021/acsanm.8b00965

(183) Title: Mechanical analysis of nickel particle-coated carbon fiber-reinforced epoxy composites for advanced structural applications

Authors: Amit Kumar Yadav, Soma Banerjee, Ravindra Kumar, Kamal K Kar, Janakarajan Ramkumar, and Kinshuk Dasgupta

References: ACS Applied Nano Materials, Vol:1, No. 8, pp:4332-4339, Year:2018, ISSN: 2574-0970, American Chemical Society

https://doi.org/10.1021/acsanm.8b01193

(182) Title: Studies on the effect of compatibilizers on mechanical, thermal and flow properties of polycarbonate/poly (butylene terephthalate) blends

Authors: Ravindra Kumar, Kamal K. Kar and Vijai Kumar

Reference: Materials Research Express, ISSN: 2053-1591, Vol.: 5, No. 1, pp.: 015306, Year: 2018, Institute of Physics Publishing Ltd, UK, (Impact factor: 0.99)

https://doi.org/10.1088/2053-1591/aaa25c

(181) Title: Fabrication of controlled expansion Al-Si composites by pressureless and spark plasma sintering

Authors:  Haquea Asraful, S Shekhar, S.V.S. Narayana Murty J. Ramkumar, K. Kar, and K. Mondal

Reference: Advanced Powder Technology, ISSN: 09218831, Vol.: 29, No. 12, pp.: 3427-3439, Year: 2018, Elsevier Science Ltd., Elsevier B.V., UK (Impact factor: 2.414)

https://doi.org/10.1016/j.apt.2018.09.024

(180) Title: Impact of particle sizes on the microwave absorption properties of nano-sized Carbon black/epoxy composites

Authors: SK Singh, Amit Kumar Yadav, Ranu Pal, M. Jaleel Akhtar and Kamal K. Kar

Reference: Advanced Materials Proceedings, Vol.: 3, No.:8, 497-500, Year: 2018, VBRI Press

DOI: 10.5185/amp.2018/7008

(179) Title: Effect of silicon carbide nanoparticles on dielectric (2.45 GHz) and thermal properties of epoxy nanocomposites for microwave curing

Authors: Ranu Pal, SK Singh, M. Jaleel Akhtar, Kamal K. Kar

Reference: Advanced Materials Proceedings, Vol.:3, No.:3, pp.:170-174, Year: 2018, VBRI Press

DOI: 10.5185/amp.2018/013

(178) Title: A synergistic Cu-Al-Fe nano adsorbent for significant arsenic remediation and As(0) supported mitigation in aqueous systems

Authors: Y.K. Penke, G. Anantharaman, J. Ramkumar,  K.K. Kar

Referencee: Environmental Arsenic in a Changing World – Zhu, Guo, Bhattacharya, Ahmad, Bundschuh & Naidu (Eds), ISBN 978-1-138-48609-62017, Vol 1, pp. 457-458, Year: 2018, CRC Press

DOI:10.1201/9781351046633-180

(177) Title: Enhancing microwave properties of epoxy resin at 2.45 GHz using graphite particles for microwave processing application

Authors: Ranu Pal, M.J. Akhtar, Kamal K. Kar

Referencee: 2018 3rd International Conference on Microwave and Photonics (ICMAP), Date of Conference: 9-11, 2018,Electronic ISBN: 978-1-5386-0933-0, CD: 978-1-5386-0932-3,Print on Demand(PoD) ISBN: 978-1-5386-0934-7,INSPEC Accession Number:17737702, Publisher: IEEE, Conference Location: Dhanbad, India,

doi: 10.1109/ICMAP.2018.8354519 

2017

(176) Title: Impact of degree of sulfonation on microstructure, thermal, thermomechanical and physicochemical properties of sulfonated poly ether ether ketone

Authors: Soma Banerjee and Kamal K. Kar

Reference: Polymer, ISSN: 0032-3861, Vol.: 109, pp.: 176-186, Year: 2017, Elsevier Science Ltd., Elsevier B.V., UK, (Impact factor: 3.775)

https://doi.org/10.1016/j.polymer.2016.12.030

(175) Title: Structural, optical and electrical characteristics of graphene nanosheets synthesized from microwave-assisted exfoliated graphite

Authors: Pankaj Chamoli, Malay K. Das and Kamal K. Kar

Reference: Reference: Journal of Applied Physics, Vol: 122, No:18, Page: 185105-1-185105-10; Year:2017, ISSN: 0021-8979, E-ISSN: 1089-7550, American Institute of Physics (Impact factor: 2.276)

https://doi.org/10.1063/1.4991577

(174) Title: Green synthesis of silver-graphene nanocomposite-based transparent conducting film

Authors: Pankaj Chamoli, Malay K. Das, and Kamal K. Kar

Reference: Physica E: Low-dimensional Systems and Nanostructures, ISSN: 1386-9477, Vol.: 90, pp.: 76-84, Year: 2017, Elsevier Science Ltd., Elsevier B.V., UK (Impact factor: 1.904)

https://doi.org/10.1016/j.physe.2017.03.015

(173) Title: Investigation on the dielectric properties of exfoliated graphite silicon carbide      nanocomposites and their absorbing capability for the microwave radiation

Authors: H.B. Baskey, Sandeep K. Singh, M.J. Akhtar, and Kamal K. Kar

Reference: IEEE Transactions on Nanotechnology, ISSN: 1536-125X (print), ISSN: 1941-0085 (online), Vol.: 16, No-03, pp.: 453-461, Year: 2017, IEEE Publishing, USA (Impact factor: 1.702)

https://doi.org/10.1109/TNANO.2017.2682121

(172) Title: Enhanced microwave processing of epoxy nanocomposites using carbon black powders

Authors: R. Pal, A.K. Jha, M.J. Akhtar, Kamal K. Kar, R. Kumar, and D. Nayak

Reference: Advanced Powder Technology, ISSN: 09218831, Vol.: 28, No. 4, pp.: 1281-1290, Year: 2017, Elsevier Science Ltd., Elsevier B.V., UK (Impact factor: 2.414)

https://doi.org/10.1016/j.apt.2017.02.016

(171) Title: Effects of Ni doping induced band modification and Ni3Se2 nanoinclusion on       thermoelectric properties of PbSe

Authors: C. Gayner, R. Sharma, M.K. Das and Kamal K. Kar

Reference: J of Alloys and Compounds, ISSN: 0928-8388, Vol.: 699, pp.: 679-689, Year: 2017, Elsevier Science Ltd., Elsevier B.V., UK, (Impact factor: 3.014)

https://doi.org/10.1016/j.jallcom.2017.01.009

(170) Title: Enhanced thermo-mechanical and electrical properties of carbon-carbon composites using human hair derived carbon powder as reinforcing filler

Authors: Ravindra Kumar, Suyash Varshney, Kamal K. Kar and Kinshuk Dasgupta

Reference: Advanced Powder Technology, ISSN: 09218831, Vol.: 29, No.:6, pp.: 1417-1432, Year: 2017, Elsevier Science Ltd., Elsevier B.V., UK (Impact factor: 2.414)

https://doi.org/10.1016/j.apt.2018.03.004

(169) Title: Structural, optical and electronic characteristics of N-doped graphene nanosheets synthesized using urea as reducing agent and nitrogen precursor

Authors: Pankaj Chamoli, Malay K. Das and Kamal K. Kar

Reference: Materials Research Express, ISSN: 2053-1591, Vol.: 4, No.:1, pp.: 015012, Year: 2017, Institute of Physics Publishing Ltd, UK, (Impact factor: 0.99)

https://doi.org/10.1088/2053-1591/aa5776

(168) Title: High-sensitive nitrogen dioxide and ethanol gas sensor using a reduced raphene oxide-loaded double split ring resonator

Authors: Sandeep K. Singh, P. Azad, M.J. Akhtar and Kamal K. Kar

Reference: Materials Research Express, ISSN: 2053-1591, Vol.: 4, No. 8, pp.: 086301, Year: 2017, Institute of Physics Publishing Ltd, UK (Impact factor: 0.99)

https://doi.org/10.1088/2053-1591/aa7c11

(167) Title: Green synthesis of N-doped graphene nanosheets by cow urine

Authors: Pankaj Chamoli, Malay K. Das, and Kamal K. Kar

Reference: Current Graphene Science, ISSN (Print): 2452-2732, ISSN (Online): 2452-2740, Vol.: 01, No-01, pp.: 58-63, Year: 2017, Bentham Science Publishers, USA

DOI: 10.2174/2452273201666170321163529

(166) Title: Temperature dependence green reduction of graphene oxide by urea

Authors: Pankaj Chamoli, Malay K. Das, and Kamal K. Kar

References: Advanced Materials Letters, Volume: 8, No. 3, pp 217-222, Year 2017, ISSN: 0976-3961, VBRI press (Impact factor 1.46)

DOI:10.5185/amlett.2017.6559

(165) Title: Thermo-mechanical properties of graphite reinforced highdensity polyethylene

      composites and its structure property corelationship

Authors: Alok Kumar Pandey, Kavita Singh, and Kamal K. Kar

References: Journal of Composite Materials, Volume: 51, No.12, pp 1769-1782, Year: 2017, eISSN: 1530793X, ISSN: 00219983, Sage Publications Ltd. UK and The American Society for Composites (Impact factor: 1.242)

https://doi.org/10.1177/0021998316683782

(164) Title: Structural and ion transport properties of lithium triflate/poly (vinylidene fluoride-  co-hexafluoropropene)-based polymer electrolytes: Effect of lithium salt concentration

Authors: A. Kumar, R. Sharma, M. Suresh, M.K. Das, and Kamal K Kar

Reference: Journal of Elastomers and Plastics, Volume: 49, No.6, pp 513-526, Year: 2017, ISSN:0095-2443, Online ISSN: 1530-8006,  Sage Publications Ltd. (Impact factor: 0.773)

https://doi.org/10.1177/0095244316676512

(163) Title: Structural and ion transport properties of [(AgI)x(AgBr)0.4-x] (LiPO3)0.6 and (AgBr)x(LiPO3)(1-x) solid electrolytes

Authors: A. Kumar, R. Sharma, C. Gayner, S. N. Rao, D.P. Singh, M.K. Das and Kamal K. Kar

References: International Journal of Applied Glass Science, The American Ceramic Society and Wiley Periodicals, Inc., ISSN: 2041-1294, Vol. 8, No. 1, Pages: 97-104, Year:2017, ISSN: 2213-3437, WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim,

https://doi.org/10.1111/ijag.12195

(162) Title: Functionally graded elastomeric composites as microwave shielding media

Authors: R. Sharma, S.S. Ahankari, Kamal K Kar, A. Biswas,  and K.V. Srivastava

Reference: Journal of Elastomers and Plastics, Volume: 49, No.1, pp 37-46, Year: 2017, ISSN:0095-2443, DOI: Sage Publications Ltd.

https://doi.org/10.1177/0095244315620917

(161) Title: Design of nanostructured graphene based RF complementary split ring resonator gas sensor for detection of nitrogen dioxide

Authors: Sandeep Kumar Singh, Prakrati Azad, M. J. Akhtar, K. K. Kar

Reference: 2017 IEEE MTT-S International Microwave and RF Conference (IMaRC), pp: 1-5, Year: 2017, Electronic ISBN: 978-1-5386-1320-7, Print on Demand(PoD) ISBN: 978-1-5386-1321-4, Electronic ISSN: 2377-9152, IEEE Explore 

doi:10.1109/IMaRC.2017.8449715     

2016

(160) Title: Effects of surface roughness and N-content on oxygen reduction reaction activity for the carbon-based catalyst derived from poultry featherfiber

Authors: Raghunandan Sharma and Kamal K. Kar

Reference: Electrochimica Acta, International Society of Electrochemistry, Vol:191, pp:876-886, Year: 2016, doi:10.1016/j.electacta.2016.01.166, ISSN: 0013-4686, Elsevier B.V., UK (Impact factor: 5.116)

https://doi.org/10.1016/j.electacta.2016.01.166

(159) Title: Synthesis and properties of highly conducting natural flake graphite/phenolic resin composite bipolar plates for PEM fuel cells

 Authors: Rajeev Kumar Gautam, Kamal K. Kar

Reference: Advanced Composites Letters, Volume 25, Year 2016, Pages 87-97 , SAGE Publishers, UK

https://doi.org/10.1177/096369351602500402

(158) Title: Impact of ceramic filler and the crystallite size of polymer matrix on the ionic transport properties of lithium triflate/poly (vinylidene fluoride-co-hexafluoropropene) based polymer electrolytes

Authors: A. Kumar, R. Sharma M. K. Das, P. Gajbhiya and Kamal K. Kar

Reference: Electrochimica Acta, International Society of Electrochemistry, Vol:215, pp:1-11, Year: 2016, ISSN: 0013-4686, Elsevier B.V., UK (Impact factor: 5.116)

https://doi.org/10.1016/j.electacta.2016.08.087

(157) Title: Effects of surface microstructure and chemical state of featherfiber-derived multidoped carbon fibers on the adsorption of organic water pollutants

Authors: P. Benjwal, R. Sharma and Kamal K. Kar

References: Materials and Design, Vol:110, pp:762-774, Year: 2016, ISSN: 0264-1275, Elsevier B.V., UK, (Impact factor: 4.753)

https://doi.org/10.1016/j.matdes.2016.08.030

(156) Title: Hierarchical carbon nanopetal/polypyrrole nanocomposite electrodes with brush-like architecture for supercapacitors

Authors: Jayesh Cherusseri and Kamal K. Kar

References: Physical Chemistry Chemical Physics, Vol.:18, pp: 8587-8597, Year:2016,

DOI: 10.1039/C6CP00150E, ISSN 1463-9076 (print), ISSN 1463-9084 (web),

Royal Society of Chemistry, UK

https://doi.org/10.1039/C6CP00150E

(155) Title:  Boost in room temperature thermoelectric performance of PbSe:Alx through band modification and low densification           

Authors: C. Gayner, R. Sharma, M.K. Das and Kamal K. Kar

Reference: Journal of Applied Physics, Vol: 120, No.:15, pp: 155106-1-155106-11; Year:2016,  ISSN: 0021-8979, E-ISSN: 1089-7550, American Institute of Physics

 https://doi.org/10.1063/1.4965725

(154) Title: Exploring the doping effects of copper on thermoelectric properties of lead selenide

Authors: C. Gayner, R. Sharma, I. Mallik, M.K. Das, and Kamal K. Kar

References: Journal of Physics D: Applied Physics, Vol.:49, No.:28, pp:285104 (13pp), Year:2016, ISSN 0022-3727 (print), ISSN 1361-6463 (web), Institute of Physics Publishing, UK

 https://doi.org/10.1088/0022-3727/49/28/285104

(153) Title: Polypyrrole-decorated 2D carbon nanosheet electrodes for supercapacitors with high areal capacitance

Authors:  Jayesh Cherusseri and Kamal K. Kar

References:  RSC Advances, Vol.: 6, pp.60454-60466, Year:2016, DOI:10.1039/C6RA01402J, ISSN 2046-2069, Royal Society of Chemistry, UK

 https://doi.org/10.1039/C6RA01402J

(152) Title: Mechanical and thermal behaviours of graphite flake reinforced acrylonitrile butadiene styrene composites and their correlation with entanglement density, adhesion, reinforcement and C factor

Authors: A. K. Pandey, R. Kumar, V. S. Kachhavah and Kamal K. Kar

References:  RSC Advances, Vol.: 6, pp.50559-50571, year:2016, ISSN 2046-2069, Royal Society of Chemistry, UK

https://doi.org/10.1039/C6RA09236E

(151) Title: Aluminum substituted nickel ferrite (Ni-Al-Fe): a ternary metal oxide adsorbent for arsenic adsorption in aqueous medium

Authors: Y. K. Penke, G. Anantharaman, J. Ramkumar and Kamal K. Kar

References:  RSC Advances, Vol.: 6, pp.55608-55617, year:2016, DOI: 10.1039/C6RA06332b, ISSN 2046-2069, Royal Society of Chemistry, UK

https://doi.org/10.1039/C6RA06332B

(150) Title: Mangifera indica, Ficus religiosa and Polyalthia longifolia leaf extract-assisted green synthesis of graphene for transparent highly conductive film

Authors: P. Chamoli, R. Sharma, M.K. Das and Kamal K. Kar

References:  RSC Advances, Vol.: 6, pp.96355-96366, year:2016, ISSN 2046-2069, Royal Society of Chemistry, UK

https://doi.org/10.1039/C6RA19111H

(149) Title: Superlinear frequency dependence of AC conductivity and its scaling behavior in xAgI-(1-x) AgPO3 glass superionic conductors       

Authors: D. P. Singh, K. Shahi and Kamal K. Kar

Reference: Solid State Ionics, Volume: 287, pp 89-96, Year: 2016, ISSN:0167-2738, Elsevier B.V.

https://doi.org/10.1016/j.ssi.2016.01.048

(148) Title: Li-ion transport, structural and thermal studies on lithium triflate and barium titanate incorporated poly (vinylidene fluoride-co-hexafluoropropene) based polymer electrolyte

Authors: A. Kumar, S. Logapperumal, R. Sharma, M.K. Das and Kamal K. Kar

Reference: Solid State Ionics, Volume: 289, pp 150-158, Year: 2016, ISSN:0167-2738, Elsevier B.V.

https://doi.org/10.1016/j.ssi.2016.03.008

(147) Title: Synergistic effects of carbon fillers of phenolic resin based composite bipolar plates on the performance of PEM fuel cell

Authors: Rajeev K. Gautam and Kamal K. Kar

Reference: Fuel Cells, Volume 16, No. 02, pp 179-192, Year 2016, ISSN: 1615-6854, WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim

https://doi.org/10.1002/fuce.201500051

(146) Title: Superior water retention, ionic conductivity and thermal stability of sulfonated poly ether ether ketone/polypyrrole/aluminium phosphate nanocomposite based polymer electrolyte membrane

Authors: Soma Banerjee, Kamal K. Kar

References: Journal of Environmental Chemical Engineering, Vol. 4, No. 1, Pages: 299-310, Year:2016, ISSN: 2213-3437, Elsevier B.V.,

https://doi.org/10.1016/j.jece.2015.11.033

(145) Title: E-glass fibers coated with nickel phosphorous by electroless deposition technique

Authors: Ariful Rahaman and Kamal K. Kar

Reference: Composite Interface, Volume 23, No. 7, pp 689-699, Year 2016, ISSN:0927-6440 (Print), 1568-5543 (Online), Taylor & Francis

https://doi.org/10.1080/09276440.2016.1168635

(144) Title: Green reduction of graphene oxide into graphene by cow urine

Authors: Pankaj Chamoli, Malay K. Das, and Kamal K Kar

Reference: Current Nanomaterials, Volume: 1, Issue: 2, pp: 110-116, Year: 2016, ISSN: 2405-4623 (Online), ISSN: 2405-4615 (Print), Bentham Science Publishers.

DOI : 10.2174/2468187306666160624113837

(143) Title: Planar RF microstrip attenuators based on carbon black and exfoliated graphite powders

Authors: Rahul Verma, Surya Prakash Singh, M Jaleel Akhta, Kamal K Kar

Reference: 2016 Asia-Pacific Microwave Conference (APMC), New Delhi, 2016, pp. 1-3, IEEE, Electronic ISBN: 978-1-5090-1592-4, Print on Demand(PoD) ISBN: 978-1-5090-1593-1,  Print ISSN: 2165-4743.

doi:10.1109/APMC.2016.7931376

---------------------------------------------------------------------------------------------------------------------------

(142) Title: Electrical and thermal transport through low densified copper doped PbSe for thermoelectric application

Authors: Chhatrasal Gayner, Iram Malik, Malay K. Das and Kamal K. Kar

References: AIP Conf. Proc. Vol:1728, Issue:1, pp. 020033 (2016); Year:2016

https://doi.org/10.1063/1.4946083

http://dx.doi.org/10.1063/1.4946083

(141) Title: Carbon nanomaterials for polymer electrolyte membrane fuel cell (PEMFC) cathode catalyst layer

Authors: Raghunandan Sharma and Kamal K. Kar

References: Proc. of the Intl. Conf. on Nanotechnology for Better Living, Vol.:3, No. 1, Page: 48, Year:2016, ISBN: 978-981-09-7519-7 (online), Research Publishing, Singapore.

doi:10.3850/978-981-09-7519-7nbl16-rps-48

(140) Title: Microwave-assisted rapid synthesis of Graphene-ZnO nanocomposite

Authors: Pankaj Chamoli, Malay K. Das and Kamal K. Kar

References: Proc. of the Intl. Conf. on Nanotechnology for Better Living, Vol.:3, No. 1, Page: 54, Year:2016, ISBN: 978-981-09-7519-7 (online), Research Publishing, Singapore.

doi:10.3850/978-981-09-7519-7nbl16-rps-54

(139)Title: Thermo-mechanical properties of ABS/CB polymer nanocomposites

Authors: Alok Kumar Pandey and Kamal K. Kar

References: Proc. of the Intl. Conf. on Nanotechnology for Better Living, Vol.:3, No. 1, Page: 58, Year:2016, ISBN: 978-981-09-7519-7 (online), Research Publishing, Singapore.

doi:10.3850/978-981-09-7519-7nbl16-rps-58

(138) Title: Understanding the role of dopants in the thermoelectric properties of PbSe

Authors: Chhatrasal Gayner, Malay K. Das and Kamal K Kar

References: Proc. of the Intl. Conf. on Nanotechnology for Better Living, Vol.:3, No. 1, Page: 59, Year:2016, ISBN: 978-981-09-7519-7 (online), Research Publishing, Singapore.

doi:10.3850/978-981-09-7519-7nbl16-rps-59

(137) Title: Fabrication and characterization of carbon based highly flexible smart battery fiber in the form of lithium ion battery

Authors: Amit Kumar Yadav and Kamal K Kar

References: Proc. of the Intl. Conf. on Nanotechnology for Better Living, Vol.:3, No. 1, Page: 63, Year:2016, ISBN: 978-981-09-7519-7 (online), Research Publishing, Singapore.

doi:10.3850/978-981-09-7519-7nbl16-rps-63

(136) Title: Bi2Te3 for room temperature thermoelectric applications

Authors: Iram Malik and Kamal K. Kar

References: Proc. of the Intl. Conf. on Nanotechnology for Better Living, Vol.:3, No. 1, Page: 79, Year:2016, ISBN: 978-981-09-7519-7 (online), Research Publishing, Singapore.

doi:10.3850/978-981-09-7519-7nbl16-rps-79

(135) Title: Effect of surface functionalities on the methylene blue adsorption capacity of feather fiber-derived multi-doped carbon

Authors: Poonam Benjwal, Raghunandan Sharma and Kamal K. Kar

References: Proc. of the Intl. Conf. on Nanotechnology for Better Living, Vol.:3, No. 1, Page: 81, Year:2016, ISBN: 978-981-09-7519-7 (online), Research Publishing, Singapore.

doi:10.3850/978-981-09-7519-7nbl16-rps-81

(134) Title: Synthesis and characterization of 2D nanocarbon synthesized by microwave irradiation

Authors: Jayesh Cherusseri and Kamal K. Kar

References: Proc. of the Intl. Conf. on Nanotechnology for Better Living, Vol.:3, No. 1, Page: 83, Year:2016, ISBN: 978-981-09-7519-7 (online), Research Publishing, Singapore.

doi:10.3850/978-981-09-7519-7nbl16-rps-83

(133) Title: Fabrication and mechanical characterization of carbon-carbon composites with human-hair derived carbon as filler material

Authors: Suyash Varshney and Kamal K. Kar

References: Proc. of the Intl. Conf. on Nanotechnology for Better Living, Vol.:3, No. 1, Page: 84, Year:2016, ISBN: 978-981-09-7519-7 (online), Research Publishing, Singapore.

doi:10.3850/978-981-09-7519-7nbl16-rps-84

(132) Title: Effect of copper and graphite flake addition on the viscoelastic properties of HDPE polymer composites

Authors: Samir Pattanayek, Alok Kumar Pandey and Kamal K. Kar

References: Proc. of the Intl. Conf. on Nanotechnology for Better Living, Vol.:3, No. 1, Page: 85, Year:2016, ISBN: 978-981-09-7519-7 (online), Research Publishing, Singapore.

doi:10.3850/978-981-09-7519-7nbl16-rps-85

(131) Title: Activated nano-carbon gel-electrolyte supercapacitor

Authors: Asheesh Kumar, Kamal K. Kar and Malay K. Das

References: Proc. of the Intl. Conf. on Nanotechnology for Better Living, Vol.:3, No. 1, Page: 86, Year:2016, ISBN: 978-981-09-7519-7 (online), Research Publishing, Singapore.

doi:10.3850/978-981-09-7519-7nbl16-rps-86

(130) Title: Enhancing surface reactivity of boron nitride nano ribbon by chlorine gas decoration: A computational study

Authors: Kiran Kumar Surthi and Kamal K. Kar

References: Proc. of the Intl. Conf. on Nanotechnology for Better Living, Vol.:3, No. 1, Page: 87, Year:2016, ISBN: 978-981-09-7519-7 (online), Research Publishing, Singapore.

doi:10.3850/978-981-09-7519-7nbl16-rps-87

(129) Title: Synthesis and characterization of rGO-Fe3O4-TiO2 nanocomposite with varying compositions for methylene blue (MB) degradation and As(III) adsorption

Authors: Milan Singh, Poonam Benjwal and Kamal K. Kar

References: Proc. of the Intl. Conf. on Nanotechnology for Better Living, Vol.:3, No. 1, Page: 88, Year:2016, ISBN: 978-981-09-7519-7 (online), Research Publishing, Singapore.

doi:10.3850/978-981-09-7519-7nbl16-rps-88

(128) Title: Fish scales derived activated carbon as cathode electrocatalyst for proton exchange membrane (PEM) fuel cells

Authors: Sanju Samanta, Raghunandan Sharma and Kamal K. Kar

References: Proc. of the Intl. Conf. on Nanotechnology for Better Living, Vol.:3, No. 1, Page: 89, Year:2016, ISBN: 978-981-09-7519-7 (online), Research Publishing, Singapore.

doi:10.3850/978-981-09-7519-7nbl16-rps-89

(127) Title: Enhanced microwave absorption properties of exfoliated graphite/epoxy composites filled with different ceramic particles

Authors: Sandeep Kumar Singh, M. J. Akhtar and Kamal K Kar

References: Proc. of the Intl. Conf. on Nanotechnology for Better Living, Vol.:3, No. 1, Page: 90, Year:2016, ISBN: 978-981-09-7519-7 (online), Research Publishing, Singapore.

doi:10.3850/978-981-09-7519-7nbl16-rps-90

(126) Title: Impregnated silicon carbide (SiC) as susceptor for microwave post curing of epoxy composites: effect on dielectric, thermal and mechanical properties

Authors: Ranu Pal, M. Jaleel Akhtar and Kamal K. Kar

References: Proc. of the Intl. Conf. on Nanotechnology for Better Living, Vol.:3, No. 1, Page: 91, Year:2016, ISBN: 978-981-09-7519-7 (online), Research Publishing, Singapore.

doi:10.3850/978-981-09-7519-7nbl16-rps-91

(125) Title: Activated carbon derived from rachis of chicken feather as electrocatalyst for proton exchange membrane (PEM) fuel cells

Authors: Shashank Singh, Raghunandan Sharma and Kamal K. Kar

References: Proc. of the Intl. Conf. on Nanotechnology for Better Living, Vol.:3, No. 1, Page: 92, Year:2016, ISBN: 978-981-09-7519-7 (online), Research Publishing, Singapore.

doi:10.3850/978-981-09-7519-7nbl16-rps-92

(124) Title: Synthesis and characterization of textile compatible solid state secondary battery and connector

Authors: Salman Khan, Amit Yadav and Kamal K. Kar

References: Proc. of the Intl. Conf. on Nanotechnology for Better Living, Vol.:3, No. 1, Page: 93, Year:2016, ISBN: 978-981-09-7519-7 (online), Research Publishing, Singapore.

doi:10.3850/978-981-09-7519-7nbl16-rps-93

(123) Title: Microwave absorption properties of carbon based microwave absorber derived from chicken featherfiber

Authors: H. Prakash, S. K. Singh, M. J. Akhtar and Kamal K Kar

References: Proc. of the Intl. Conf. on Nanotechnology for Better Living, Vol.:3, No. 1, Page: 94, Year:2016, ISBN: 978-981-09-7519-7 (online), Research Publishing, Singapore.

doi:10.3850/978-981-09-7519-7nbl16-rps-94

(122) Title: Exfoliated graphite reinforced acrylonitrile butadiene styrene composites

Authors: K. B. Bisal and Kamal K. Kar

References: Proc. of the Intl. Conf. on Nanotechnology for Better Living, Vol.:3, No. 1, Page: 95, Year:2016, ISBN: 978-981-09-7519-7 (online), Research Publishing, Singapore.

doi:10.3850/978-981-09-7519-7nbl16-rps-95

(121) Title: Precise synthesis of nano-sized TiB2 for electronic applications

Authors: Abhijnan Chowdhuri and Kamal K. Kar

References: Proc. of the Intl. Conf. on Nanotechnology for Better Living, Vol.:3, No. 1, Page: 96, Year:2016, ISBN: 978-981-09-7519-7 (online), Research Publishing, Singapore.

doi:10.3850/978-981-09-7519-7nbl16-rps-96

(120) Title: Activated carbon derived from human hair as electrode material for supercapacitors

Authors: Robin Rathaur and Kamal K. Kar

References: Proc. of the Intl. Conf. on Nanotechnology for Better Living, Vol.:3, No. 1, Page: 97, Year:2016, ISBN: 978-981-09-7519-7 (online), Research Publishing, Singapore.

doi:10.3850/978-981-09-7519-7nbl16-rps-97

(119) Title: Microwave based planar gas sensor using graphene and conducting polymer incorporated with double split ring resonator

Authors: Prakrati Azad , M. J. Akhtar and Kamal K Kar

References: Proc. of the Intl. Conf. on Nanotechnology for Better Living, Vol.:3, No. 1, Page: 98, Year:2016, ISBN: 978-981-09-7519-7 (online), Research Publishing, Singapore.

doi:10.3850/978-981-09-7519-7nbl16-rps-98

(118) Title: LiPO3 based fast ionic conductor for solid state lithium secondary batteries

Authors: A. Kumar, S.N. Rao, M.K. Das and Kamal K. Kar

References: Proc. of the Intl. Conf. on Nanotechnology for Better Living, Vol.:3, No. 1, Page: 99, Year:2016, ISBN: 978-981-09-7519-7 (online), Research Publishing, Singapore.

doi:10.3850/978-981-09-7519-7nbl16-rps-99

(117) Title: Finishing of helical gears using abrasive flow finishing

Authors: Dipti Sharma, Kamal K. Kar and J. Ramkumar

References: Proc. of the Intl. Conf. on Nanotechnology for Better Living, Vol.:3, No. 1, Page: 100, Year:2016, ISBN: 978-981-09-7519-7 (online), Research Publishing, Singapore.

doi:10.3850/978-981-09-7519-7nbl16-rps-100

(116) Title: Arsenic adsorption on aluminum substituted nickel ferrite (Ni-Al-Fe) ternary metal oxide adsorbents in aqueous systems

Authors: Y.K. Penke, G. Anantharaman, J. Ramkumar and Kamal K. Kar

References: Proc. of the Intl. Conf. on Nanotechnology for Better Living, Vol.:3, No. 1, Page: 129, Year:2016, ISBN: 978-981-09-7519-7 (online), Research Publishing, Singapore.

doi:10.3850/978-981-09-7519-7nbl16-rps-129

(115) Title: Synergistic effect of tungstophosphoric acid and aluminium phosphate nanoparticles on physicochemical properties of sulfonated poly ether ether ketone polymer electrolyte membrane

Authors: Soma Banerjee and Kamal K. Kar

References: Proc. of the Intl. Conf. on Nanotechnology for Better Living, Vol.:3, No. 1, Page: 168, Year:2016, ISBN: 978-981-09-7519-7 (online), Research Publishing, Singapore.

doi:10.3850/978-981-09-7519-7nbl16-rps-168

(114) Title: Effect of compatibilizers on morphology, mechanical and thermal properties of polycarbonate/poly (butylene terephthalate) blends

Authors: Ravindra Kumar, Kamal K. Kar and Vijai Kumar

References: Proc. of the Intl. Conf. on Nanotechnology for Better Living, Vol.:3, No. 1, Page: 268, Year:2016, ISBN: 978-981-09-7519-7 (online), Research Publishing, Singapore.

doi:10.3850/978-981-09-7519-7nbl16-rps-268

(113) Title: Material coatings used in mechanical heart valves: A critical review

Authors: A. Tharayil, V. Verma, M.K. Das and Kamal K. Kar

References: Proc. of the Intl. Conf. on Nanotechnology for Better Living, Vol.:3, No. 1, Page: 278, Year:2016, ISBN: 978-981-09-7519-7 (online), Research Publishing, Singapore.

doi:10.3850/978-981-09-7519-7nbl16-rps-278

(112) Title: Materials used in mechanical heart valves: A geometrical perspective

Authors: A. Tharayil, V. Verma, M.K. Das and Kamal K. Kar

References: Proc. of the Intl. Conf. on Nanotechnology for Better Living, Vol.:3, No. 1, Page: 284, Year:2016, ISBN: 978-981-09-7519-7 (online), Research Publishing, Singapore.

doi:10.3850/978-981-09-7519-7nbl16-rps-284

(111) Title: Artificial heart valve testing setup

Authors: Kamal K. Kar and Mridul Bharadwaj

References: Proc. of the Intl. Conf. on Nanotechnology for Better Living, Vol.:3, No. 1, Page: 287, Year:2016, ISBN: 978-981-09-7519-7 (online), Research Publishing, Singapore.

doi:10.3850/978-981-09-7519-7nbl16-rps-287

(110) Title: Simplest laboratory design of differential thermal analyzer

Authors: Somnath Danayak and Kamal K. Kar

References: Proc. of the Intl. Conf. on Nanotechnology for Better Living, Vol.:3, No. 1, Page: 291, Year:2016, ISBN: 978-981-09-7519-7 (online), Research Publishing, Singapore.

doi:10.3850/978-981-09-7519-7nbl16-rps-291

(109) Title:. Hard materials used in mechanical heart valves: A critical review

Authors: A. Tharayil, V. Verma, M.K. Das and Kamal K. Kar

References: Proc. of the Intl. Conf. on Nanotechnology for Better Living, Vol.:3, No. 1, Page: 331, Year:2016, ISBN: 978-981-09-7519-7 (online), Research Publishing, Singapore.

doi:10.3850/978-981-09-7519-7nbl16-rps-331

(108) Title: Soft Materials used in heart valve research: A critical review

Authors: A. Tharayil, V. Verma, M.K. Das and Kamal K. Kar

References: Proc. of the Intl. Conf. on Nanotechnology for Better Living, Vol.:3, No. 1, Page: 335, Year:2016, ISBN: 978-981-09-7519-7 (online), Research Publishing, Singapore.

doi:10.3850/978-981-09-7519-7nbl16-rps-335

(107) Title: Design and testing of mechanical heart valve

Authors: Meraj Ahmed, Malay K. Das and Kamal K. Kar

References: Proc. of the Intl. Conf. on Nanotechnology for Better Living, Vol.:3, No. 1, Page: 339, Year:2016, ISBN: 978-981-09-7519-7 (online), Research Publishing, Singapore.

doi:10.3850/978-981-09-7519-7nbl16-rps-339

2015

(106) Title: Particle size and crystallographic orientation controlled electrodeposition of platinum nanoparticles on carbon nanotubes

Authors: Raghunandan Sharma and Kamal K. Kar

Reference: Electrochimica Acta, International Society of Electrochemistry, Vol:156, pp:199-206, Year: 2015, ISSN: 0013-4686, Elsevier B.V., UK

(Impact factor: 5.116)

https://doi.org/10.1016/j.electacta.2015.01.046

(105) Title: Oxygen reduction reaction activity of nitrogen, oxygen and sulphur containing carbon derived from low-temperature pyrolysis of poultry featherfiber

Authors: Raghunandan Sharma and Kamal K. Kar

Reference: Electrochimica Acta, International Society of Electrochemistry, Vol:156, pp:1054-1064, Year: 2015, ISSN: 0013-4686, Elsevier B.V., UK (Impact factor: 5.116)

https://doi.org/10.1016/j.electacta.2015.07.108

(104) Title: Hierarchically structured catalyst layer for oxygen reduction reaction fabricated by electrodeposition of platinum on carbon nanotube coated carbon fiber platinum particle size  on oxygen reduction activity of hierarchically structured Pt/CNT

Authors: Raghunandan Sharma and Kamal K. Kar

References:  RSC Advances, Vol.: 5, pp.66518-66527, Year:2015, DOI: 10.1039/C5RA13866C, ISSN 2046-2069, Royal Society of Chemistry, UK

DOI: 10.1039/c5ra13866c

(103) Title: Enhanced photocatalytic degradation of methylene blue and adsorption arsenic (III) by reduced graphene oxide (rGO) -metal oxide (TiO2/Fe3O4) based nanocomposites

Authors:P. Benjwal, M. Kumar, P. Chamoli and Kamal K. Kar

References:  RSC Advances, Vol.: 5, pp.73249-73260, Year: 2015, ISSN 2046-2069, Royal Society of Chemistry, UK

https://doi.org/10.1039/C5RA13689J

(102) Title: Self-standing carbon nanotube forest electrodes for flexible supercapacitors

Authors: Cherusseri Jayesh and Kamal K. Kar

References: RSC Advances, Vol.:5, Pages: 34335-34341, Year:2015, ISSN: 2046-2069, Royal Society of Chemistry, UK

https://doi.org/10.1039/C5RA04064G

(101) Title: Removal of methylene blue from wastewater under a low power irradiation source by Zn, Mn co-doped TiO₂ photocatalyst

Authors: Poonam Benjwal and Kamal K. Kar

References: RSC Advances, Vol.:5, Pages: 98166-98176, Year:2015, ISSN: 2046-2069, Royal Society of Chemistry, UK

https://doi.org/10.1039/C5RA19353B

(100) Title:  Inherent room temperature ferromagnetism and dopant dependent Raman studies of PbSe, Pb1-xCuxSe, and Pb1-xNixSe           

Authors: Chhatrasal Gayner and Kamal K. Kar

Reference: Journal of Applied Physics, Vol: 117, pp: 103906-1-8 Year:2015, ISSN: 0021-8979, E-ISSN: 1089-7550, American Institute of Physics

https://doi.org/10.1063/1.4914487

(099) Title: One-step synthesis of Zn doped titania nanotubes and investigation of their visible photocatalytic activity

Authors: Poonam Benjwal and Kamal K. Kar

References: Materials Chemistry and Physics, Vol.160, pp: 279-288, Year:2015, ISSN: 0254-0584, doi:10.1016/j.matchemphys.2015.04.038, Elsevier B.V.,

https://doi.org/10.1016/j.matchemphys.2015.04.038

(098) Title: Simultaneous photocatalysis and adsorption based removal of inorganic and organic impurities from water by titania/activated carbon/carbonized epoxy nanocomposite

Authors: Poonam Benjwal and Kamal K. Kar

References: Journal of Environmental Chemical Engineering, Vol. 3, No. 3, pp: 2076-2083, Year:2015, ISSN: 2213-3437, Elsevier B.V.,

https://doi.org/10.1016/j.jece.2015.07.009

(097) Title:  Electrical, mechanical, and thermal properties of exfoliated graphite​/phenolic resin composite bipolar plate for polymer electrolyte membrane fuel cell           

Authors: Nagaraju Sykam, Rajeev K. Gautam, and Kamal K. Kar

Reference: Polymer Engineering & Science, Volume: 55, No. 04, pp 917-923, Year: 2015, ISSN:0032-3888, DOI:10.1002/pen.23959, John Wiley & Sons, Inc.

https://doi.org/10.1002/pen.23959

(096) Title: Viscoelastic properties of coil carbon nanotube coated carbon fiber reinforced polymer nanocomposites

Authors: R. Sharma, A. K. Yadav, V. Panwar, and Kamal K Kar

References: Journal of Reinforced Plastics and Composites, Vol. 34, No. 12, Pages: 941-950 Year:2015, SAGE Publishers, UK

https://doi.org/10.1177/0731684415584432

(095) Title: Synergistic effect of aluminium phosphate and tungstophosphoric acid on the physicochemical properties of sulfonated poly ether ether ketone nanocomposite membrane

Authors: Soma Banerjee and Kamal K. Kar

References: Journal of Applied Polymer Science, Vol. 133, No. 5, Pages: 42952 (1-11), Year:2015, ISSN: 1097-4628 (Online), ISSN: 0021-8995 (Print), Wiley Publishers, USA

https://doi.org/10.1002/app.42952

(094) Title: Synthesis of poly ether ether ketone membrane with pendent phosphonic acid group and determination of proton conductivity and thermal stability

Authors: S. Banerjee, Kamal K. Kar, Manas K. Ghorai and S. Das

Reference:  High Performance Polymers, Year: 2015, Vol. 27, No. 04, pp.402-411, Print ISSN: 0954-0083, Online ISSN: 1361-6412, DOI: 10.1177/0954008314553643, Sage Publications.

https://doi.org/10.1177/0954008314553643

(093) Title: Aluminium substituted phosphotungstic acid /sulfonated poly ether ether ketone nanocomposite membrane with reduced leaching and improved proton conductivity

Authors: Soma Banerjee and Kamal K. Kar

Reference:  High Performance Polymers, Year: 2016, Vol. 28, No. 09, pp.1043-1058, Print ISSN: 0954-0083, Online ISSN: 1361-6412, Sage Publications.

https://doi.org/10.1177/0954008315614984

(092) Title: Bipolar plate materials for proton exchange membrane fuel cell application

Authors: Rajeev Gautam, Soma Banerjee, Kamal K. Kar

Reference: Recent Patents on Materials Science (continued as Current Materials Science), Volume: 8, Issue: 1, PP: 15-45, Year: 2015, ISSN: 1874-4656 (Online), ISSN: 1874-4648 (Print), Bentham Science Publishers.

DOI : 10.2174/1874464808666150306223104

(091) Title: Preparation, characterization, and properties of resole type phenolic resin/exfoliated graphite composite bipolar plates for PEM fuel cell

Authors: Rajeev K. Gautam and Kamal K. Kar

References: Advanced Science, Engineering and Medicine, Vol. 7(5), pp.429-434, year:2015, ISSN: 2164-6627 (print), EISSN: 2164-6635 (online), American Scientific Publishers

DOI: https://doi.org/10.1166/asem.2015.1709

(090) Title: The effects of nano-sized carbon black content and particle sizes on the properties of carbon/phenolic composite bipolar plates

Authors: Rajeev K. Gautam and Kamal K. Kar

References: Journal of Multidisciplinary Engineering Science and Technology (JMEST), Vol. 2, No.2, pp.191-200, year:2015, ISSN: 3159-0040, JMESTN42350484

(089) Title: Green synthesis of less defect density bilayer graphene

Authors: Pankaj Chamoli, Malay K. Das and Kamal K. Kar

Reference: Graphene, ISSN: 2167-275X (Print); EISSN: 2167-2768 (Online), Vol:3, No:1 Page: 56-60 Year:2015, American Scientific Publishers

DOI: https://doi.org/10.1166/graph.2015.1060

2014 

(088) Title:  Carbon nanomaterials grown on E-​glass fibers and their application in

composite

Authors: Ariful Rahaman and Kamal K. Kar

Reference: Composites Science and Technology, Volume: 101, pp 001-010, Year: 2014, ISSN:0266-3538, Elsevier B.V. (Impact factor: 5.202)

https://doi.org/10.1016/j.compscitech.2014.06.019

(087) Title:  Carbon nanotube coated carbon fiber based composite filaments for  luminescent bulbs           

Authors: Raghunandan Sharma and Kamal K. Kar

Reference: Materials Letters, Volume: 137, pp 150-152, Year: 2014, ISSN:0167-577X, Elsevier B.V.

https://doi.org/10.1016/j.matlet.2014.09.003

(086) Title:  Rapid synthesis of exfoliated graphite by microwave irradiation and oil sorption studies           

Authors: Nagaraju Sykam, and Kamal K. Kar

Reference: Materials Letters, Volume: 117, pp 150-152, Year: 2014, ISSN:0167-577X, Elsevier B.V.

https://doi.org/10.1016/j.matlet.2013.12.003

(085) Title: Easy approach and scalable synthesis of bilayer graphene

Authors: Nagaraju Sykam and Kamal K. Kar

Reference: Graphene, ISSN: 2167-275X (Print); EISSN: 2167-2768 (Online), Vol:2, No:1 Page:52-56, Year:2014, American Scientific Publishers

DOI: https://doi.org/10.1166/graph.2014.1034

(084) Title: Particulate filled polymer electrolyte membrane for fuel cell applications

Authors: S. Banerjee, Kamal K. Kar

Reference: Recent Patents on Materials Science (continued as Current Materials Science), Volume: 7, Issue: 2, PP: 131-150, Year: 2014, ISSN: 1874-4656 (Online), ISSN: 1874-4648 (Print), Bentham Science Publishers.

DOI: 10.2174/1874464807666140528003109

(083) Title: Electrolyte membranes for fuel cells: synthesis, characterization and degradation analysis

Authors: S. Banerjee, Kamal K. Kar and Malay K. Das

Reference: Recent Patents on Materials Science (continued as Current Materials Science), Volume: 7, Issue: 3, PP: 173-203, Year: 2014, ISSN: 1874-4656 (Online), ISSN: 1874-4648 (Print), Bentham Science Publishers.

DOI : 10.2174/1874464807666141001231351

2013

(082) Title:  Scaling behavior and nearly constant loss effect in AgI-​LiPO3 composite glasses           

Authors: Devendra Pratap Singh, K. Shahi and Kamal K. Kar

Reference: Solid State Ionics, Volume: 231, No.xx pp 102-108, Year: 2013, ISSN:0167-2738, Elsevier B.V.

https://doi.org/10.1016/j.ssi.2012.10.025

(081) Title: Nanohydroxyapatite synthesized from calcium oxide and its  characterization

Authors: Sumit Pramanik and Kamal K. Kar

Reference: The International Journal of Advanced Manufacturing Technology, Vol:66 No.5, page: 1181-1189, Year: 2013, ISSN: 0268-3768 (print version), ISSN: 1433-3015 (electronic version), Springer

https://doi.org/10.1007/s00170-012-4401-z

2012

(080) Title: Studies on woven century fiber polyester composites

Authors: K. Raja Narender Reddy, D. K. N. Rao, K. Gopala Kishan Rao and Kamal K. Kar

Reference: Journal of Composite Materials, Volume: 46, Issue: 23, PP: 2919-2933, Year: 2012, ISSN:0021-9983, Sage Publications Ltd.

https://doi.org/10.1177/0021998311434789

(079) Title:  Cohesive zone model of carbon nanotube-​coated carbon fiber​/polyester composites

Authors: Prabhat K. Agnihotri, Kamal K. Kar and Sumit Basu

Reference: Modelling and Simulation in Materials Science and Engineering, Volume: 20, No.03 pp 035014 (13pp), Year: 2012, ISSN:1361-651X, Institute of Physics Publishing.

 https://doi.org/10.1088/0965-0393/20/3/035014

(078) Title:  Mechanical properties of functionally graded carbon black-​styrene butadiene rubber composites: Effect of modifying gradation and average filler loading

Authors: Sandeep Ahankari and Kamal K. Kar

Reference: Journal of Applied Polymer Science, Volume: 125, No.5 pp 3469-3476, Year: 2012, ISSN:0021-8995, John Wiley & Sons, Inc.

https://doi.org/10.1002/app.36704

(077) Title:  Surface finishing of carbon-carbon composites using abrasive flow machining

Authors: N.L. Ravikumar, Kamal K. Kar, D. Sathiyamoorthy, Anil Kumar, and Rohini Devi.

Reference: Fullerenes, Nanotubes, and Carbon Nanostructures, Volume: 20, No.02 pp 170-182, Year: 2012, ISSN:1536-383X, Taylor & Francis, Inc.

 https://doi.org/10.1080/1536383X.2010.533595

(076) Title:  Functionalized poly(ether ether ketone)​: Improved mechanical property and acellular bioactivity

Authors: Sumit Pramanik and Kamal K. Kar

Reference: Journal of Applied Polymer Science, Volume: 123, No.2 pp 1100-1111, Year: 2012, ISSN:0021-8995, John Wiley & Sons, Inc.

https://doi.org/10.1002/app.34582

2011

(075) Title: Effect of coating time and temperature on electroless deposition of cobalt-phosphorous for the growth of carbon nanotubes on the surface of E-glass fibers/fabric

Authors: A. Rahaman and Kamal K. Kar

References: Fullerenes, Nanotubes and Carbon Nanostructures, Vol.:19(5), Pages: 373-397, Year:2011, Print: ISSN: 15364046, Online ISSN: 1536383X, Taylor & Francis, UK

https://doi.org/10.1080/15363831003722797

(074) Title: Effects of graphite filler loading and heat treatment temperature on the properties of phenolic resin based carbon-carbon composites

Authors: N. L. Ravikumar, Kamal K. Kar, and D. Sathiyamoorthy

References: Polymer Composites, Vol.:32, No:3, Pages: 353-361, Year:2011, Print: ISSN: 02728397, Online ISSN: 1548-0569, John Wiley and Sons Inc.., Society of Plastic Engineers, USA

https://doi.org/10.1002/pc.21039

(073) Title: Numerical simulation of the degradation behavior of the phenolic resin matrix during the production of carbon/carbon composites

Authors: N.L. Ravikumar, Kamal K Kar, C. Pandya and D. Sathiyamoorthy

Reference: Fullerenes, Nanotubes, and Carbon Nanostructures, Volume: 19, No.05 pp 353-372, Year: 2011, ISSN:1536-383X, Taylor & Francis, Inc.

 https://doi.org/10.1080/15363831003722789

(072) Title: Preparation and characterization of nickel coated carbon fiber reinforced polycarbonate composites

Authors: Satyaprakash Kushwaha, Kamal K Kar, P. Santhana Gopala Krishna, S.K. Sharma

Reference: J. of Reinforced Plastics and Composites, Polymer Composites, ISSN: 0731-6844

Sage Publications Ltd., Vol:30, No.14, pp:1185-1196, Year:2011

https://doi.org/10.1177/0731684411414092

(071) Title: Synthesis of carbon nanofibers on hydroxyapatite by flame deposition

Authors:  Sumit Pramanik and Kamal K. Kar

Reference: Fullerenes, Nanotubes, and Carbon Nanostructures, Vol 19(7) pp 605-616, Year: 2011, ISSN: 1536-383X, Publisher: Taylor & Francis, Inc.

 https://doi.org/10.1080/1536383X.2010.504957

(070) Title: Transport properties of xAgI-(1-x)LiPO3 composite electrolytes

Authors: DP Singh, K. Shahi, and KK Kar

Reference: AIP Conference Proceedings,  Vol-1349, No-1,  pp. 981-982, Year: 2011, ISSN:0094-243X, Publisher: American Institute of Physics

https://doi.org/10.1063/1.3606188

 2010

(069) Title: Synthesis of carbon nanotubes on nickel-silica catalyst coated E-glass fiber/fabric and its nanocomposites

Authors: Ariful Rahaman, Kamal K. Kar, D. Chaudhary

References: International Journal of Plastic Technology, Vol.:14(1), Pages: 65-79, Year:2010, Print: ISSN 0972-656X, Online: ISSN 0975-072X, Springer Verla, UK

https://doi.org/10.1007/s12588-009-0019-x

(068) Title: The fabrication of carbon-​nanotube-​coated electrodes and a field-​emission-​based luminescent device

Authors: Sanjay Agarwal, B. Yamini Sarda, Kamal K. Kar

References: Nanotechnology, Vol.:21(6), Pages: 065601/1-065601/5, Year:2010, Print: ISSN: 13616528, Online ISSN: 09574484, Institute of Physics Publishing (IOP), UK

https://doi.org/10.1088/0957-4484/21/6/065601

(067) Title: Effects of curing agent and carbon black fillers loading on carbonization behavior of phenolic-carbon black composites

Authors: N.L. Ravikumar, Kamal K. Kar, S. Sarkar, and D. Sathiyamoorthy

Reference: Polymer Composites, Vol.:31, No:12, pp: 2069-2078, Year:2010, Print: ISSN: 02728397, Online ISSN: 1548-0569, John Wiley and Sons Inc.., Society of Plastic Engineers, USA

https://doi.org/10.1002/pc.21005

(066) Title: Effects of graphite filler on mechanical properties of carbon-carbon composites

Authors: N.L. Ravikumar and Kamal K Kar

Reference: Plastic Research Online, Pages: 1-3, Year:2010, DOI:10.1002/spepro.003019, Society of Plastic Engineers, USA

DOI:10.1002/spepro.003019

(065) Title: Processing and mechanical behavior of carbon black graded rubber compounds

Authors: S.S. Ahankari, Kamal K. Kar

Reference: Journal of Applied Polymer Science, Vol. 115(6), pp. 3146-3154. Year: 2010

ISSN:0021-8995, Wiley

https://doi.org/10.1002/app.31401

(064) Title: Hydrophilic plasticized biopolymers: Morphological influence on physical properties

Authors: Deeptangshu Chaudhary, Yu Dong, Kamal K. Kar

Reference: Materials Letters, Vol. 64(7), pp. 872-875.  Year: 2010, ISSN:0167-577X, Elsevier

https://doi.org/10.1016/j.matlet.2010.01.048

(063) Title: Rheological characterization and performance evaluation of a new medium developed for abrasive flow finishing

Authors: M. Ravisankar, V. K. Jain, J. Ramkumar, Kamal K. Kar

Reference: International Journal of Precision Technology, Vol.1, No: 3/4, pp. 302-313, Year:2010, Inderscience Enterprises Ltd.

DOI: 10.1504/IJPTECH.2010.031659

(062) Title: Hysteresis measurements and dynamic mechanical characterization of functionally graded natural rubber-carbon black composites

Authors: S.S. Ahankari, Kamal K. Kar

Reference: Polymer Engineering and Science, Vol. 50(5), pp. 871-877. Year: 2010, ISSN:0032-3888, Wiley, Society of Plastic Engineers

https://doi.org/10.1002/pen.21601

(061) Title: A novel approach to synthesize carbon nanotubes, carbon nanocoils, carbon microcoils on the surface of metallic wire: application in vacuum electronic devices

Authors: Sanjay Agarwal, B. Yamini Sarda, Kamal K. Kar

References: The Azo Journal of Materials Online, Vol.:11(2), Pages: 49-56, Year:2010, Association Number: 2010:137836, Online ISSN: ISSN:1440-0731, AD-TECH, USA

DOI : 10.2240/azojomo0302

2009

(060) Title: Preferential media for abrasive flow machining

Authors: Kamal K Kar, NL Ravikumar, PB Tailor, J. Ramkumar and D. Sathiyamoorthy

Reference: Transations of the ASME, Journal of Manufacturing Science and Engineering, Vol.: 131, Pages. 011009-1-011009-13 Year:2009, ISSN: 1087-1357, Year: 2009, Publisher: ASME, The American Society of Mechanical Engineers

https://doi.org/10.1115/1.3046135

(059) Title: Synthesis of carbon nanotubes on the surface of carbon fiber/fabric by catalytic chemical vapor deposition and their characterization

Authors: Kamal K. Kar, A. Rahaman, P. Agnihotria and D. Sathiyamoorthy

References: Fullerenes, Nanotubes and Carbon Nanostructures, Vol.:17(3), Pages: 209-229, Year:2009, Print: ISSN: 15364046, Online ISSN: 1536383X, Taylor & Francis, UK

https://doi.org/10.1080/15363830902779718

(058) Title: A simple method for controlled growth of carbon nanocoils on metallic wire by chemical vapor deposition

Authors: B. Yamini Sarda, Sanjay Agarwal, Kamal K. Kar

References: Nanoscience and Nanotechnology Letters, Vol.:1(3), Pages: 213-217, Year:2009, DOI:10.1166/nnl.2009.1035, Print: ISSN: 19414919, Online ISSN: 19414900, American Scientific Publishers, USA

DOI: https://doi.org/10.1166/nnl.2009.1035

(057) Title: Performance evaluation and rheological characterization of newly developed butyl rubber based media for abrasive flow machining process

Authors: Kamal K Kar, NL Ravikumar, PB Tailor, J. Ramkumar and D. Sathiyamoorthy

Reference: Journal of Materials Processing Technology, Vol.: 209, No:4, pp:2212-2221, ISSN:0924-0136, Year: 2009, Publisher: Elsevier B.V.

https://doi.org/10.1016/j.jmatprotec.2008.05.012

(056) Title: Polypropylene nanosphere: Particle size and crystal structure

Authors: Pradip Paik and Kamal K Kar

Reference:International Journal of Plastic Technology, ISSN:0972-656X, Vol. 13(1), Year 2009, pp 68-82, Publisher: Central Institute of Plastics Engineering & Technology, Springer

(055) Title: Thermal degradation kinetics and estimation of lifetime of polyethylene particles: Effects of particle size

Authors: Pradip Paik and Kamal K. Kar

Reference: Materials Chemistry and Physics, Vol.: 113(2-3),  pp. 953-961, ISSN:0254-0584, Year: 2009, Elsevier B.V.

https://doi.org/10.1016/j.matchemphys.2008.08.075

(053) Title: Influence of process parameters for coating of nickel-phosphorous carbon fibers

Authors: Kamal K. Kar and D. Sathiyamoorthy

Reference: J of Materials Processing & Technology, ISSN: 0924-0136, Vol:209(6), pp: 3022-3029, Year: 2009, Elsevier

https://doi.org/10.1016/j.jmatprotec.2008.07.006

2008

(052) Title: Self catalyzing behavior of kanthal wire for coating of carbon nanotubes

Authors: Ariful Rahaman, N. Patra and Kamal K. Kar

References: Fullerenes, Nanotubes and Carbon Nanostructures, Vol.:16(1), Pages: 78-87, Year:2008, DOI:10.1080/15363830701786682, Print: ISSN: 15364046, Online ISSN: 1536383X, Taylor & Francis, UK

https://doi.org/10.1080/15363830701786682

(051) Title: Acrylonitrile-butadiene-styrene nanocomposites filled with nanosized alumina

Authors: Kamal K. Kar, S. Srivastava, Ariful Rahaman and S.K. Nayak

References: Polymer Composites, Vol.:29(5), Pages: 489-499, Year:2008, DOI: 10.1002/pc.20387, Print: ISSN: 02728397, Online ISSN: 1548-0569, John Wiley and Sons Inc.., Society of Plastic Engineers, USA

https://doi.org/10.1002/pc.20387

(050) Title: Interlaminar shear strength of fiber reinforced plastic composites made by the newly proposed rubber pressure molding technique: effect of temperature

Authors: Kamal K. Kar, S. D. Sharma, Akash Mohanty, P. Kumar  

Reference: International Journal of Plastics Technology, Volume: 12, No.1, pp 925-941, Year: 2008, ISSN:0972-656X, Accession Number: 2008:1548034 CAN154:11935, Springer.

(049) Title: Stress relaxation behavior of glass fiber-​reinforced polyester composites prepared by the newly proposed rubber pressure molding

Authors: Kamal K. Kar, S. D. Sharma, P. Kumar, Akash Mohanty

Reference: Polymer Composites, Volume: 29, No.10, pp 1077-1097, Year: 2008, ISSN:0272-8397, DOI:10.1002/pc.20484, John Wiley & Sons, Inc., Society of Plastics Engineers, USA

https://doi.org/10.1002/pc.20484

(048) Title: Short-​term effect of distilled water, seawater and temperature on the crushed and interlaminar shear strength of fiber reinforced plastic composites made by the newly proposed rubber pressure molding technique

Authors: Kamal K. Kar, S. D. Sharma, Akash Mohanty, P. Kumar

Reference: Polymer Composites, Volume: 29, No.6, pp 670-691, Year: 2008, ISSN:0272-8397, DOI:10.1002/pc.20437, John Wiley & Sons, Inc., Society of Plastics Engineers, USA

https://doi.org/10.1002/pc.20437

(047) Title: Kinetics of thermal degradation and estimation of lifetime for polypropylene particles: Effects of particle size

Authors: Pradip Paik and Kamal K. Kar

Reference: Polymer Degradation and Stability, Vol.: 93(1), pp. 24-35, Year: 2008, ISSN:0141-3910, Elsevier Ltd.

https://doi.org/10.1016/j.polymdegradstab.2007.11.001

(046) Title: Processing and characterization of functionally graded materials through mechanical properties and glass transition temperature

Authors: S.S Ahankari and Kamal K. Kar

Reference: Materials Letters (2008), Vol.: 62(19),  pp. 3398-3400, Year: 2008, ISSN:0167-577X, Elsevier B.V.

https://doi.org/10.1016/j.matlet.2008.03.021

(045) Title: Processing of styrene butadiene rubber-carbon black nanocomposites with gradation of crosslink density: Static and dynamic mechanical characterization

Authors: SS Ahankari and Kamal K. Kar

Reference: Materials Science & Engineering, A: Structural Materials: Properties, Microstructure and Processing, A, Vol.: 491(1-2),  pp. 454-460. Year: 2008, ISSN:0921-5093, Elsevier B.V.

https://doi.org/10.1016/j.msea.2008.02.018

(044) Title: Surface roughness and morphology of polypropylene nanospheres: Effects of particles size

Authors: Pradip Paik and Kamal K. Kar

Reference: Surface Engineering  (2008),  Vol.: 24(5),  pp: 341-349, Year: 2008, ISSN:0267-0844, Maney Publishing, Taylor Francis.

https://doi.org/10.1179/174329408X298256

(043) Title: High molecular weight polyethylene nanospheres: Synthesis, physical and mechanical properties

Authors: Pradip Paik and Kamal K Kar

Reference: Journal of Nanoscience and Nanotechnology, Vol: 8(6), pp: 3123-3135, Year: 2008,  ISSN: 1533-4880, American Scientific Publishers

DOI: https://doi.org/10.1166/jnn.2008.079

 2007

(042) Title: Measurement of mechanical properties of polymer nanospheres by AFM: Effects of particle size

Authors: Pradip Paik, Kamal K Kar, Dinesh Deva and Ashutosh Sharma

References: Micro and Nano Letters (2007), ISSN: 1750-0443, Vol: 2(3), pp:72-77, Year: 2007, ISSN: 1750-0443, The Institution of Engineering and Technology, IEEE Xplore

DOI: 10.1049/mnl:20070030

http://dx.doi.org/10.1049/mnl:20070030

(041) Title: Effects of temperature on interlaminar fracture toughness of fibre reinforced plastic composites made by newly proposed rubber pressure moulding technique

Authors: Kamal K. Kar, S. D. Sharma, P. Kumar

Reference: Plastics, Rubber and Composites: Macromolecular Engineering Volume: 36, No.6, pp 274-280, Year: 2007, Print ISSN: 1465-8011 Online ISSN: 1743-2898, Maney Publishing, Taylor Francis, Institute of Materias, Minerals and Mining

https://doi.org/10.1179/174328907X191477

(040) Title: Pressure distribution analysis of fiber reinforced plastic components made by rubber pressure moulding technique

Authors: Kamal K. Kar, S. D. Sharma, P. Kumar, J. Ramkumar, R.K. Appaji, K.R.N. Reddy

Reference: Journal of Applied Polymer Science, Volume: 105, No.6, pp 3333-3354, Year: 2007, ISSN:0021-8995, John Wiley & Sons, Inc., Society of Plastics Engineers, USA

 https://doi.org/10.1002/app.26565

(039) Title: Effect of rubber hardness on the properties of fiber reinforced plastic composites made by the newly proposed rubber pressure molding technique

Authors: Kamal K. Kar, S. D. Sharma, P. Kumar

Reference: Polymer Composites,, Volume: 28, No.5, pp 618-630, Year: 2007, ISSN:0272-8397, John Wiley & Sons, Inc., Society of Plastics Engineers, USA

https://doi.org/10.1002/pc.20294

(038) Title: Analysis of rubber pressure molding technique to fabricate fiber reinforced plastic components

Authors: Kamal K. Kar, S. D. Sharma, P. Kumar, J. Ramkumar, R.K. Appaji, K.R.N. Reddy

Reference: Polymer Composites, Volume: 28, No.5, pp 637-649, Year: 2007, ISSN:0272-8397, John Wiley & Sons, Inc., Society of Plastics Engineers, USA

https://doi.org/10.1002/pc.20310

(037) Title: Development of rubber pressure molding technique using butyl rubber to fabricate fiber reinforced plastic components based on glass fiber and polyester resin

Authors: Kamal K. Kar, S. D. Sharma, Tinku K. Sah, P. Kumar

Reference: Journal of Reinforced Plastics and Composites, Volume: 26, No.3, pp 269-283, Year: 2007, ISSN:0731-6844, Sage Publications Ltd.

https://doi.org/10.1177/0731684407070047

(036) Title: Development of rubber pressure molding technique using silicone rubber to fabricate fiber-​reinforced plastic components based on glass fiber and epoxy resin

Authors: Kamal K. Kar, S. D. Sharma, S. K. Behera, P. Kumar

Reference: Journal of Elastomers & Plastics, Volume: 39, No.2, pp 117-131, Year: 2007, ISSN:0095-2443, Sage Publications Ltd.

https://doi.org/10.1177/0095244306067425

(035) Title: High molecular weight polypropylene nanospheres: Synthesis and characterization

Authors: Pradip Paik and Kamal K. Kar

Reference: Journal of Applied Polymer Science, ISSN:0021-8995, Vol: 105, No-3, pp.: 1133-1143, Year: 2007, John Wiley & Sons, Inc.

https://doi.org/10.1002/app.26177

(034) Title: Experimental investigation on effect of alumina filler in butyl through mechanical properties

Authors: P.B.Tailor, J.Ramkumar and K.K.Kar

Reference: Journal of Engineering and Technology, Vol. 20, pp:35-39, Year: 2007

(033) Title: High molecular weight (MW) nano sized polyethylene (PE): Effect of particle size, macro-micro-nano

Authors: P. Paik, and Kamal K. Kar

Reference: ANTEC, ISSN:  0272-5223, Vol:65, pp:543-547, Year:2007, Society of Plastics Engineers, USA

(032) Title: Hybrid nanocomposites of carbon nanotubes (CNTs) grown on carbon fiber in polyester matrix with improved thermomechanical properties

Authors: P. Agnihotri and Kamal K. Kar

Reference: ANTEC, ISSN: 0272-5223, Vol:65, pp:2558-2562, Year: 2007, Society of Plastics Engineers, USA

(031) Title: Molecular dynamics simulation of deformation behaviour of carbon nanotubes under generic mode of loading

Authors: P. Agnihotri S. Basu and Kamal K. Kar

Reference: ANTEC, ISSN: 0272-5223, Vol:65, pp:2179-2183, Year:2007, Society of Plastics Engineers, USA

(030) Title: Apatite-Poly (Ether Etherketone) nanocomposites: prosthesis materials: SBF-conditioned study

Authors: S. Pramanik and Kamal K. Kar

Reference: ANTEC, ISSN: 0272-5223, Vol:65, pp:2558-2562, Year:2007, Society of Plastics Engineers, USA

(029) Title: Mechanical properties of rubber mould used in the newly proposed RPM

Authors: Kamal K. Kar, S. D. Sharma, P. Kumar

Reference: Kautschuk Gummi Kunststoffe, Volume: 60, No.12, pp 662-669, Year: 2007, ISSN:0948-3276, Accession Number: 2008:9362 CAN150:123144, Huethig GmbH & Co. KG, Germany

(028) Title: Effect of coating agents to fabricate fiber reinforced plastic components based on continuous glass fiber and polyester resin using newly proposed rubber pressure molding technique

Authors: Kamal K. Kar, S. D. Sharma, Tinku K. Saha. P. Kumar

Reference: International Journal of Mechanical Engineering and Materials Science, Volume: 1, No.1, pp 61-74, Year: 2007, ISSN : 0974-584X, Serails Publications

(027) Title: Functionally graded polymer nanocomposites (FGPNCs) filled with nano sized filler

Authors: Ahankari Sandeep S. and Kamal K. Kar

Reference: ANTEC, ISSN: 0272-5223, Vol:65, pp: 1372-1376, Year:2007, Society of Plastics Engineers, USA

(026) Title: Studies on the thermomechanical   properties of nickel phosphorous coated carbon  fiber fabric/polyester laminates

Authors: N.  Patra, Kamal K. Kar

Reference: ANTEC, ISSN: 0272-5223, Vol:65, pp:1412-1416, Year:2007, Society of Plastics Engineers, USA

2006

(025) Title: Development of a rubber pressure molding technique for fiber reinforced plastics

Authors: Kamal K. Kar, S. D. Sharma, S. K. Behera, P. Kumar

Reference: Kautschuk Gummi Kunststoffe, Volume: 59, No.04, pp 169-173, Year: 2006, ISSN: 0948-3276, Accession Number: 2006:487836 CAN146:252798, Huethig GmbH & Co. KG, Germany

(024) Title: Development of rubber pressure molding technique using butyl rubber to fabricate fiber reinforced plastic components based on glass fiber and epoxy resin

Authors: Kamal K. Kar, S. D. Sharma, S. K. Behera, P. Kumar

Reference: Journal of Applied Polymer Science, Volume: 101, No.02, pp 1095-1102, Year: 2006, ISSN:0021-8995, John Wiley & Sons, Inc., Society of Plastics Engineers, USA.

https://doi.org/10.1002/app.24005

(023) Title: Development of rubber pressure moulding technique using polybutadiene rubber to fabricate fibre reinforced plastic components based on glass fibre and epoxy resin

Authors: Kamal K. Kar, S. D. Sharma, S. K. Behera, P. Kumar

Reference: Current Science, Volume: 90, No.11, pp 1492-1499, Year: 2006, ISSN:0011-3891, Accession Number: 2006:686703 CAN147:10783, Current Science Association.

https://www.jstor.org/stable/24091823

(022) Title: Surface roughness of fiber reinforced plastic laminates fabricated using rubber pressure molding technique

Authors: S.D. Sharma, Kamal K. Kar, P. Kumar

Reference: Polymer Composites, Volume: 27, No.5, pp 504-512, Year: 2006, ISSN:0272-8397, John Wiley & Sons, Inc., Society of Plastics Engineers, USA.

https://doi.org/10.1002/pc.20219

(021) Title: Experimental characterization of thin sandwich panel of polymer composite

Authors: Prasanth Kumar, Axay Kumar, Kamal K. Kar and J.Ramkumar

Reference: Advanced Composite letters, Vol. 15, Issue 3, pp:95-104, Year: 2006, ISSN: 2633-366X,  Online ISSN: 2633-366X, SAGE Publications Ltd

https://doi.org/10.1177/096369350601500303

(020) Title: Glass transition temperature of high molecular weight polystyrene:  Effect of particle size, bulk to micron to nano

Authors: Kamal K. Kar and Pradip Paik

Reference: Nanotech, Vol.: 1, pp.: 483-486, Year: 2006, ISBN: 0-9767985-6-5,  Technical Proceedings of the 2006 NSTI Nanotechnology Conference and Trade Show, Nano Science & Technology Institute

(019) Title: Finite element analysis of hyperelastic materials: Elastomeric seal

Authors: M. Rawat, Kamal K. Kar and J.U. Otaigbe

Reference: ANTEC, ISSN: 0272-5223, Vol:62(1), pp: 2277-2283, Year: 2004, Society of Plastics Engineers, USA

(018) Title: Hysteresis loss of polymeric materials: Finding of new dimensionless parameters

Authors: Kamal K. Kar, A.K. Bhowmick and J.U. Otaigbe

Reference: ANTEC, ISSN: 0272-5223, Vol:62(1), pp: 1994-1998, Year: 2004, Society of Plastics Engineers, USA

(017) Title: A rheological model for quantitative prediction of die swell: effect of shear rate and temperature

Authors: Kamal K. Kar, S.Gupta and J.U. Otaigbe

Reference: ANTEC, ISSN: 0272-5223, Vol: 62(1), pp: 1059-1063, Year: 2004, Society of Plastics Engineers, USA

(016) Title: Rheological characterization of liquid crystal polymers (Xydar-300, Xydar-400 and Xydar-900) measured in ARES spectrometer

Authors: Kamal K. Kar and J.U. Otaigbe

Reference: ANTEC, ISSN: 0272-5223, Vol:62(1), pp: 991-995, Year: 2004, Society of Plastics Engineers, USA

(015) Title: Scanning electron microscopy, spectroscopy and viscoelastic studies of nano low density polyethylene

Authors: Kamal K. Kar, Pradip Paik, Suresrao, A. S. and Joshua U Otaigbe

Reference: ANTEC, ISSN: 0272-5223, Vol: 62 (2), pp: 2505-2509, Year: 2004, Society of Plastics Engineers, USA

(014) Title: Synthesis and characterization of nano-polystyrene: Effect of temperature, shear rate and solvents

Authors: Kamal K. Kar, Rakesh Kumar Pradip Paik and Joshua U. Otaigbe

Reference: ANTEC, ISSN: 0272-5223, Vol: 62 (2), pp: 2500-2504, Year: 2004, Society of Plastics Engineers, USA

(013) Title: Characterization of structure and viscoelastic properties of polypropylene nanopolymer

Authors: Kamal K. Kar, P. Paik and J.U. Otaigbe

Reference: ANTEC, ISSN: 0272-5223, Vol: 62 (2), pp: 2495-2499, Year: 2004, Society of Plastics Engineers, USA

(012) Title: Synthesis and characterization of nanopolymer: High density polyethylene

Authors: Kamal K. Kar, P.Paik, J.U. Otaigbe

Reference:ANTEC, ISSN: 0272-5223, Vol: 62 (2), pp: 2490-2494, Year: 2004, Society of Plastics Engineers, USA

(011) Title: Epoxy-montmorillonite clay nanocomposites: Synthesis and characterization

Authors: Vineeta Nigam, D. K. Setua, G. N. Mathur, and Kamal K. Kar

Reference: J. of Applied Polymer Science, ISSN:0021-8995, Vol: 93, No-5, pp.: 2201-2210, Year: 2004, John Wiley & Sons, Inc.

https://doi.org/10.1002/app.20736

2004

(010) Title: Development of rubber pressure molding technique to fabricate fiber reinforced plastic components using natural rubber and polyester/epoxy resin

Authors: Kamal K. Kar, P. Kumar, Joshua U. Otaigbe

Reference: ANTEC, Volume: 62, No.02, pp 1430-1434, Year: 2004, ISSN: 0272-5223,  Society of Plastics Engineers, USA.

2001

(009) Title: Numerical analysis and experimental studies on the role of   rheological properties in effecting die swell of lowdensity polyethylene, polypropylene and polystyrene : A predictive model based on Newtonian Fluid

Authors: Kamal K. Kar and Joshua U. Otaigbe

References: Journal of Elastomers and Plastics, ISSN: 0272-8397, Vol: 33, No. 4, pp.: 297-336, Year: 2001, Sage Publications Ltd.

https://doi.org/10.1106/1U08-KR8F-73BA-XNKG

 2000

(008) Title: High strain hysteresis loss of rubber vulcanizates under pure shear and constrained extensions and Influence of filler

Authors: Kamal K. Kar and Anil K. Bhowmick

References: Rubber Chemistry and Technology, eISSN 1943-4804, ISSN 0035-9475, Vol: 73, No:1, pp.: 56-73, Year: 2000, American Chemical Society, USA

https://doi.org/10.5254/1.3547580

(007) Title: Numerical analysis and experimental studies on the role of rheological properties in effecting die swell of low density polyethylene, polypropylene and polystyrene

Authors: Kamal K. Kar, Sunil B. Adalja and Joshua U. Otaigbe

References: Proceedings of the International Congress on Rheology, Vol.: 1, pp.: 292-294, Year: 2000, ISBN-10: 0953890422, ISBN-13: 978-0953890422, British Society of Rheology, UK

1999

(006) Title: Medium strain hysteresis loss of natural rubber and styrene-butadiene rubber vulcanizates: A predictive model

Authors: Kamal K. Kar and Anil K. Bhowmick

References: Polymer, ISSN: 0032-3861, Vol.: 40(3), pp.: 683-699, Year: 1999, Elsevier.

https://doi.org/10.1016/S0032-3861(98)00194-3

1998

(005) Title: Analysis of high strain hysteresis loss of non-linear rubbery polymers

Authors: Kamal K. Kar and Anil K. Bhowmick

Reference: Polymer Engineering & Science, ISSN: 0032-3888, Online ISSN: 1548-2634, Vol.: 38(1), pp.: 38-48, Year: 1998, Society of Plastics Engineers, USA

https://doi.org/10.1002/pen.10163

(004) Title: Effect of holding time on high strain hysteresis loss of carbon black filled rubber vulcanizates

Authors: Kamal K. Kar and Anil K. Bhowmick

Reference: Polymer Engineering & Science, ISSN: 0032-3888, Online ISSN: 1548-2634, Vol.: 38(12), pp.: 1927-1945, Year: 1998, Society of Plastic Engineers, USA

https://doi.org/10.1002/pen.10363

1997

(003) Title: Hysteresis loss in filled rubber vulcanizates and its relationship with heat generation

Authors: Kamal K. Kar and Anil K. Bhowmick

References: J. of Applied Polymer Science, ISSN:0021-8995, Vol.: 64 (8), pp.: 1541-1555, Year: 1997, John Wiley & Sons, Inc.

https://doi.org/10.1002/(SICI)1097-4628(19970523)64:8<1541::AID-APP12>3.0.CO;2-0

(002) Title: High strain hysteresis of rubber vulcanizates over a range of compositions, rates and temperatures

Authors: Kamal K. Kar and Anil K. Bhowmick

References: J. of Applied Polymer Science, ISSN:0021-8995, Vol.: 65(7), pp.: 1429-1439, Year: 1997, John Wiley & Sons, Inc.

https://doi.org/10.1002/(SICI)1097-4628(19970815)65:7<1429::AID-APP21>3.0.CO;2-O

(001) Title: Hysteresis loss in filled rubber vulcanizates and its relationship with heat generation in tyre compounds

Authors: Kamal K. Kar and Anil K. Bhowmick

References: Rubber Chem. Review, Vol. XXII(4), pp.: 25-33, Year: 1997, Y.K. Luthra of rubber Chem Review.