Google Scholar Profile:

Publications
Publishers hold the copyrights. Papers are made avaiilable for personal academic use only.

Journal Publications

  • Rajput H, Law, M.,Rapid online chatter detection in milling using aliased signals, Int. J. of Mechatronics and Manufacturing Systems, Vol.17 No.1, 2024
  • Law, M.,Vision-based modal analysis of machine tool systems: progress and prospects, Journal of Flow Visualization and Image Processing, 2024
  • Singhania S, Law, M.,Regenerative instabilities in guided metal circular sawing, Sadhana, 49 , 2024
  • Jhakar D, Law, M.,Experimental analysis of chatter in grooving with slender blades,Manufacturing Letters 38, 74-78, 2023.
  • Nuhman, A P., Singh, A., Lambora, R.,Law, M.,Methods to estimate subpixel level small motion from video of vibrating cutting tools, CIRP Journal of Manufacturing Science and Technology, 2022.
  • Patel, A., Yadav, A., Law, M., Bhattacharya, B., Wahi, P., Damped Chatter Resistant Boring Bar Integrated with an Absorber Working in Conjunction with an Eddy Current Damper, Journal of Vibration Engineering & Technologies, 2022
  • Lambora, R., Nuhman, A P., Law, M., and Mukhopadhyay, S., Recovering cutting tool modal parameters from fractionally uncorrelated and potential aliased signals, CIRP Journal of Manufacturing Science and Technology, 38, 2022.
  • Law, M., Lambora, R., Nuhman, A P., and Mukhopadhyay, S., Modal parameter recovery from temporally aliased video recordings of cutting tools, Annals of the CIRP - Manufacturing Technology, Vol. 71, 2022.
  • Singhania, S., Singh, A., and Law, M. Dynamics and Stability of Metal Cutting Circular Saws with Distributed and Lubricated Guides, Journal of Vibration Engineering & Technologies, 2022
  • Sahu, G., Deora, P., Law, M., and Wahi, P.Adaptive Model‑Free Gain Tuning for Active Damping of Machine Tool Vibrations, Journal of Vibration Engineering & Technologies, 2022
  • Sahu, G and Law, M Hardware-in-the-loop simulator for emulation and active control of chatter, HardwareX 11, 2022
  • Patel, A., Talaviya, D., Law, M., and Wahi, P Optimally tuning an absorber for a chatter-resistant rotating slender milling tool holder, Journal of Sound and Vibration, 2021
  • Sahu, G., Law, M., and Wahi, P Adaptive control to actively damp bistabilities in highly interrupted turning processes using a hardware-in-the-loop simulator, Journal of Vibration and Control, 2021
  • Bari, P, Kilic M, Law, M. and Wahi, P Rapid stability analysis of serrated end mills using graphical-frequency domain methods, International Journal of Machine Tools and Manufacture, 171, 2021
  • Ananthakrishna, A. T., Srinivasu, D. S., and Law, M. Identifying Joint Dynamics in Bolted Cantilevered Systems under Varying Tightening Torques and Torsional Excitations, Journal of Vibration Engineering & Technologies, 2021
  • Gupta, P., Rajput, H., and Law, M., Vision-based modal analysis of cutting tools, CIRP Journal of Manufacturing Science and Technology, 32, 2021
  • Sahu, G., Pulkit. J., Wahi, P., and Law, M., Emulating bistabilities in turning to devise gain tuning strategies to actively damp them using a hardware-in-the-loop simulator, CIRP Journal of Manufacturing Science and Technology, 32, 2021
  • Law, M., Karthik, R., Sharma, S., and Ramkumar, J., Finish turning of hardened bearing steel using textured PcBN tools, Journal of Manufacturing Processes. 60 (2020) 144–161.
  • Bari, P., Law, M., and Wahi, P., Geometric models of non-standard serrated end mills, The International Journal of Advanced Manufacturing Technology. 2020.
  • Sahu, G.N.; Singh, S.; Singh, A.; Law, M. Static and Dynamic Characterization and Control of a High-Performance Electro-Hydraulic Actuator. Actuators 2020, 9, 46.
  • Gupta, P., Law, M. and Mukhopadhyay, S., Evaluating tool point dynamics using output-only modal analysis with mass-change methods, CIRP Journal of Manufacturing Science and Technology, 2020.
  • Yadav, A.; Talaviya, D.; Bansal, A.; Law, M. Design of Chatter-Resistant Damped Boring Bars Using a Receptance Coupling Approach. J. Manuf. Mater. Process. 2020, 4, 53.
  • Law, M., Gupta, P., and Mukhopadhyay, S., Modal analysis of machine tools using visual vibrometry and output-only methods, Annals of the CIRP - Manufacturing Technology, Vol. 69, 2020.
  • Sahu, G., Vashisht. S., Wahi, P., and Law, M., Validation of a hardware-in-the-loop simulator for investigating and actively damping regenerative chatter in orthogonal cutting, CIRP Journal of Manufacturing Science and Technology, 2020.
  • Subhash N, Jagdeesha T, and Law, M, Investigations on machinability and machining stability of turning super duplex stainless steel, International Journal of Machining and Machinability of Materials (IJMMM), 2020.
  • Bari, P., Law, M., and Wahi, P., Improved chip thickness model for serrated end milling, CIRP Journal of Manufacturing Science and Technology, 2019.
  • Law, M., Rentzsch, H. and Ihlenfeldt, S, Predicting mobile machine tool dynamics by experimental dynamic substructuring, International Journal of Machine Tools and Manufacture, Vol. 108, 2016.
  • Law, M., Wabner, M., Colditz, A., Kolouch, M, Noack, S. and Ihlenfeldt, S., Active Vibration Isolation of Machine Tools Using an Electro-Hydraulic Actuator, CIRP Journal of Manufacturing Science and Technology, Vol. 10, 2015.
  • Law, M. and Ihlenfeldt, S., A frequency based substructuring approach to efficiently model position-dependent dynamics in machine tools, Journal of Multi-body Dynamics, 2014.
  • Law, M., Phani, A. S. and Altintas, Y., Position-Dependent Multibody Dynamic Modeling of Machine Tools based on Improved Reduced Order Models, ASME Journal of Manufacturing Science and Engineering, Vol. 135, 2013.
  • Law, M., Altintas, Y., and Phani, A. S., Rapid evaluation and optimization of machine tools with position-dependent stability, International Journal of Machine Tools and Manufacture, Vol. 68, 2013.
  • Law, M., Ihlenfeldt, S., Wabner, M., Altintas, Y., and Neugebauer, R, Position-dependent dynamics and stability of serial-parallel kinematic machines, Annals of the CIRP - Manufacturing Technology, Vol. 62, 2013.

Conference proceedings

  • Patel A, Law M, Wahi P, 2023, Damping chatter vibrations of a boring bar by an integrated impact damper, International Conference on Vibration Problems, ICOVP 2023. Awarded best paper.
  • Rajput H S, Law M, 2023, A compressed sensing framework to recover cutting tool modal parameters from aliased video International Conference on Vibration Problems, ICOVP 2023
  • Singh, V., & Law, M. (2023). Machine tool multibody dynamic model updating using vision-based modal analysis. Manufacturing Technology Today, 22(2), 23–28.
  • Pujari , A., Rajput, H. S., Law, M., & Singh, M. K. (2023). Learning machining stability using a bayesian model. Manufacturing Technology Today, 22(2), 10–16.
  • Shanavas N A, Law M, Singh M K, 2023, Learning machining stability diagrams from data using neural networks, Manufacturing Technology Today
  • Rajput, H. S., & Law, M. (2023). Recovering cutting tool modal parameters from randomly sampled signals using compressed sensing. Manufacturing Technology Today, 22(2), 17–22.
  • Singhania, S., & Law, M. (2023). Influence of process damping on the regenerative instability of guided metal circular sawing. Manufacturing Technology Today, 22(4), 20–25.
  • Raizada, V., & Law, M. (2023). Obtaining subpixel level cutting tool displacements from video using a CNN architecture. Manufacturing Technology Today, 22(3), 14–19.
  • Patel, A., Law, M., & Wahi, P. (2023). Vibration suppression of a slender boring bar by an impact damper. Manufacturing Technology Today, 22(4), 14–19.
  • Pujari A, Rajput H S, Law M, Singh M K, 2023, Bayesian Learning Model for Predicting Stability of System with Nonlinear Characteristics, 4th International Conference on Machine Learning, Image Processing, Network Security and Data Sciences, MIND 2022
  • Sahu, G. Jain, P., Law, M., and Wahi, P. Emulating chatter with process damping in turning using a hardware-in-the-loop simulator., Proceedings of the 8th Int. and 29th All India Manufacturing Technology, Design and Research Conference AIMTDR 2021. Awarded best paper.
  • Zekai Murat Kilic, Pritam Bari, and Mohit Law Milling stability prediction using non-iterative multi-frequency solution, 41st International MATADOR Conference on Advanced Manufacturing, 2021
  • Gupta, P. and Law, M. Evaluating tool point dynamics using smartphone-based visual vibrometry, 9th CIRP Conference on High Performance Cutting, Procedia CIRP 2021, 101C.
  • Bari, P., Law, M., and Wahi, P., Comparative analysis of cutting forces and stability of standard and non-standard profiled serrated end mills, 9th CIRP Conference on High Performance Cutting, Procedia CIRP 2021, 101C.
  • Singhania, S., and Law, M. Regenerative instabilities of spring-guided circular saws, 9th CIRP Conference on High Performance Cutting, Procedia CIRP 2021, 101C.
  • Ananthakrishna, A. T., Srinivasu, D. S., and Law, M Experimental Characterization of Stiffness and Damping of Assemblies with Bolted Lap Joints, International Conference on Advances in Material Science and Mechanical Engineering (ICAMSME 2020).
  • Ananthakrishna, A. T., Srinivasu, D. S., and Law, M Experimental Characterization of Stiffness and Damping of Assemblies with Bolted Lap Joints, International Conference on Advances in Material Science and Mechanical Engineering (ICAMSME 2020).
  • Sahu, G. Vashisht, S., Jain, P., Wahi, P. and Law, M Investigating nonlinear finite amplitude chatter instabilities using a hardware-in-the-loop simulator, UTIS 2019, Turkey.
  • Gaur, M. and Law, M., Pocket milling strategies using combined-mode and feed-direction-dependent stability criteria, Proceedings of the 17th CIRP Conference on Modelling of Machining Operations, CIRP CMMO 2019, UK.
  • Sahu, G., Vashisht. S., Wahi, P., and Law, M., Validation of a hardware-in-the-loop simulator for investigating and actively damping regenerative chatter in orthogonal cutting, 8th International Conference on Virtual Machining Process Technology, VMPT 2019, Vancouver, Canada
  • Bari, P., Law, M., and Wahi, P., Investigations on the influence of radial run-out on cutting forces for serrated cutters, Proceedings of the 2nd International Conference on Computational Methods in Manufacturing, ICCMM 2019, Guwahati, India.
  • Singhania, S., Kumar, P, Gupta, S. K., and Law, M, Influence of guides on critical speeds of circular saws, Proceedings of the 2nd International Conference on Computational Methods in Manufacturing, ICCMM 2019, Guwahati, India.
  • Bari, P., Wahi, P., and Law, M. Investigations on the influence of serration parameters on cutting forces, Proceedings of the 7th International and 28th All India Manufacturing Technology, Design and Research Conference AIMTDR 2018, India. Awarded the best paper in the AIMTDR 2018 conference
  • Nagesh, S. and Law, M., Machine tool design with preferentailly asymmetrical structures to improve dynamics and productivity, Proceedings of the 12th CIRP ICME, Proceedia CIRP, 2018, Naples, Italy.
  • Bansal, A. and Law, M., A receptance coupling approach to optimally tune and place absorbers on boring bars for chatter suppression, Proceedings of the 8th HPC 2018 - CIRP Conference on High Performance Cutting, Proceedia CIRP, 2018, Budapest, Hungary.
  • Bansal, A. and Law, M., A receptance coupling approach to design damped boring bars, Proceedings of the COPEN10, 2017, India.
  • Kumar, A. and Law, M., Experimental Identification of cutting force coefficients for serrated end mills, Proceedings of the COPEN10, 2017, India.
  • Law, M., Design Guidelines for an Electro-Hydraulic Actuator to Isolate Machines from Vibrations, Proceedings of the 6th International and 27th All India Manufacturing Technology, Design and Research Conference AIMTDR 2016, India.
  • Law, M., Rentzsch, H., Ihlenfeldt, S. and Putz, M., Application of substructure decoupling techniques to predict mobile machine tool dynamics: Numerical investigations. 7th HPC 2016 - CIRP Conference on High Performance Cutting, Proceedia CIRP 46, 2016.
  • Law, M., Rentzsch, H. and Ihlenfeldt, S., Development of a Dynamic Substructuring Framework to Facilitate in Situ Machining Solutions Using Mobile Machine Tools, Procedia Manufacturing 1, 756-767. Presented at the NAMRI/SME conference USA. 2015.
  • Law, M., Wabner, M., Colditz, A., Kolouch, M, Noack, S. and Ihlenfeldt, S., Active Vibration Isolation of Machine Tools Using an Electro-Hydraulic Actuator, 4th International Conference on Virtual Machining Process Technology, VMPT2015, Canada.
  • Law, M., Wabner, M. and Ihlenfeldt, S., Integrated Strategies for High Performance Peripheral Milling, Proceedings of the 5th International and 26th All India Manufacturing Technology, Design and Research Conference AIMTDR 2014, India.
  • Law, M., Rentzsch, H. and Ihlenfeldt, S., Evaluating Mobile Machine Tool Dynamics by Substructure Synthesis, Advanced Materials Research, Vol. 1018, 2014, Proceedings of the WGP Congress 2014, Germany.
  • Wabner, M., Law, M. and Ihlenfeldt, S., Dynamic modelling of an electro-hydraulic actuator to isolate machine tools from ground vibrations, Proceedings of the 11th International Conference on High Speed Machining, HSM 2014, Czech Republic.
  • Law, M., Grossi, N., Phani, A. S, and Altintas, Y., Modeling the Orientation-Dependent Dynamics of Machine Tools with Gimbal Heads, Proceedings of the 3rd International Chemnitz Manufacturing Colloquium ICMC 2014, Germany.
  • Law, M., Wabner, M., Friess, U., Ihlenfeldt, S. and Zander, G., Improving machining performance of in-use machine tools with active damping devices, Proceedings of the 3rd International Chemnitz Manufacturing Colloquium ICMC 2014, Germany.
  • Mehrpouya, M., Law, M., Park, C., Park, S., and Altintas, Y., Joint Dynamics Identification on a Vertical CNC Machine, 2nd International Conference on Virtual Machining Process Technology, VMPT2013, Canada.
  • Law, M., Altintas, Y., and Phani, A. S., An Integrated Position-Dependent Process-Machine Interaction Approach to Machine Tool Design, 1st International Conference on Virtual Machining Process Technology, , VMPT2012, Canada.
  • Law, M., Altintas, Y., and Phani, A. S., Improved Reduced Order Modeling of Machine Tool Structures, Proceedings of NAMRI/SME, Vol. 40, 2012, U.S.A.
  • Sutherland, J. W, J. L. Rivera, K. L. Brown, Law, M., M. J. Hutchins, T. L. Jenkins, and K. R. Haapala, Challenges for the Manufacturing Enterprise to Achieve Sustainable development, Keynote paper for The 41st CIRP Conference on Manufacturing. Systems, 2008, Japan.
Contact
Office: Department of Mechanical Engineering, IIT Kanpur

Phone: +91 512-259-6897

Email: mlaw@iitk.ac.in

designed by Yogi
➤