Html> Untitled Document

Publications

Publications in Referred International Journals:

  1. Mohite PM and Upadhyay CS. Local quality of smoothening based a-posteriori error estimators for laminated plates under transverse loading, Computers And Structures, Vol. 80, 18-19, July 2002; 1477-1488. [Download pdf] (Impact Factor 1.440)
  2. Mohite PM and Upadhyay CS. Focussed adaptivity for laminated plates, Computers and Structures, Vol. 81, 2003; 287-293. [Download pdf] (Impact Factor 1.440)
  3. Mohite PM and Upadhyay CS. Accurate computation of critical local  quantities in composite laminated plates under transverse loading, Computers and Structures, Vol. 84, 10-11, April 2006; 657-675. [Download pdf] (Impact Factor 1.440)
  4. Mohite PM and Upadhyay CS. Region-by-region modeling of laminated composite plates, Computers and Structures, Vol. 85, 23-24, December 2007; 1808-1827. [Download pdf] (Impact Factor 1.440)
  5. Prasanna Kumar I, Mohite PM and Kamle S. Axial tensile testing of single fibres. Modern Mechanical Engineering, Vol. 2(4), 2012; 151-156. [Download pdf] (Impact Factor 0.4)
  6. Mohite PM and Upadhyay CS. A generalized adaptive analysis of laminated plates, Vol. 112-113, December 2012, 217-234.[Download pdf] (Impact Factor 1.874)
  7. Prasanna Kumar I, Mohite PM and Kamle S. Axial compressive strength testing of single carbon fibres, Archives of Mechanics, Vol. 65, 2013, 27-43. [Download pdf] (Impact Factor 0.48)
  8. Prasanna Kumar I, Kushwaha S, Kamle S and Mohite PM. Longitudinal shear modulus of single aramid, carbon and glass fibres by torsion pendulum tests, International Journal of Mechanical, Industrial Science and Engineering, Vol. 8, 2014, 202-207.
  9. David Kumar, Shah Mit, Mohite PM, Kamle S. Structural dynamic analysis of bioinspired carbon fibre/Polyethylene MAV wings, International Journal of Recent Advances in Mechanical Engineering, Vol. 3(4), 2014, 7-15.
  10. Biswas S, Nithesh P, Mohite PM and Upadhyay CS. Micromechanics based intralaminar damage mesomodel for unidirectional fibrous composite laminates, International Journal of Theoretical and Applied Multiscale Mechanics, Vol. 3(1), 2014, 74-98.
  11. David Kumar, Mohite PM, Kamle S. Development and Modal Analysis of Bioinspired CNT/Epoxy Nanocomposite MAV Flapping Wings, Aerospace Sciences and Technologies, Vol. 67(1), 2015, 83-93.
  12. Mohite PM, Upadhyay CS. Adaptive Finite Element Based Shape Optimization in Laminated Composite Plates. Computers and Structures, Vol. 153, 2015, 19-35. [Download pdf]
  13. Shrivastava Sachin, Mohite PM. Design and Optimization of a Composite Canard Control Surface of an Advanced Fighter Aircraft under Static Loading, Curved and Layered Structures, Vol. 2, 2015, 91-105. [Download pdf]
  14. Shrivastava Sachin, Mohite PM. Redesigning of a Canard Control Surface of an Advanced Fighter Aircraft: Effect on Buckling and Aerodynamic Behavior, Curved and Layered Structures, Vol. 2, 2015, 183-193. [Download pdf]
  15. T Goyal, David Kumar, Vemuri SK, Mohite PM, Kamle S. Design and kinematic analysis of Gull inspired flapping wing model, Applied Mechanics and Materials Journal, Vol. 772, 2015, 430-434.
  16. David Kumar, Vemuri SK, Goyal T, Mohite PM, Kamle S. Modal analysis of hummingbird inspired flapping MAV wings, Applied Mechanics and Materials Journal, Vol. 772, 2015, 435-440.
  17. Jain A, Upadhyay CS and Mohite PM. Micromechanics based fibre breaking damage mesomodel for unidirectional fibrous laminated composites, Journal of Aerospace Sciences and Technologies, Vol. 67(4), 500-.
  18. Gurmeet Singh, David Kumar, Mohite PM. Damage modelling of epoxy material under uniaxial tension based on micromechanics and experimental analysis, Archive of Applied Mechanics, DOI 10.1007/s00419-016-1219-4. [Download pdf] (Impact Factor 1.490)
  19. Babu KP, Mohite PM, Upadhyay CS. Development of an RVE and its stiffness predictions based on mathematical theory for short fibre composites, International Journal of Solids and Structures, 130-131; 2018:80-104. [Download pdf] (Impact Factor 2.760)
  20. Sachin Shrivastava, PM Mohite, Tarun Yadav, Appasaheb Malagaudanavar. Multiobjective multilaminate design and optimization of carbon fibre composite wing torsion box using evolutionary algorithm. Composite Structures, 185; 2018:132-147. [Download pdf] (Impact Factor 3.858)
  21. A Khechai, A Tati, B Guerira, A Guettala, PM Mohite. Strength degradation and stress analysis of composite plates with circular, square and rectangular noteches using digital image correleations. Composite Structures, 185; 2018:699-715. [Download pdf] (Impact Factor 3.858)
  22. Abdelhak Khechai, Abdelouahab Tati, Belhi Guerira, Abdelhamid Guettala, Mohite PM. A general solution for stress resultants around circular cutout in laminate plates under different in-plane loadings: Analytical and experimental investigations. Archive of Applied Mechanics, 88; 2018:1187-1208. [Download pdf] (Impact Factor 1.490)
  23. Harikrishnan R, Mohite PM and Upadhyay CS. Generalized Weibull Model based statistical tensile strength of carbon fibres, Archive of Applied Mechanics, https://doi.org/10.1007/s00419-018-1391-9. [Download pdf] (Impact Factor 1.467)
  24. Sachin Shrivastava, PM Mohite, MD Limaye. Optimal design of fighter aircraft wing panels laminates under multi-load case environment by ply drop and ply-migrations, Composite Structures, 207,2019:909-922. [Download pdf] (Impact Factor 4.101)
  25. A Khechai, PM Mohite. Optimum design of perforated symmetric laminates using evolutionary algorithm, Journal of Composite Materials, doi.org/10.1177/0021998318815324 (Impact Factor 1.613)
  26. David Kumar, Kamle S, PM Mohite, GM Kamath. A novel real-time DIC-FPGA based measurement method for dynamic testing of light and flexible structures. Measurement Science and Technology, https://doi.org/10.1088/1361-6501/ab01a7 (Impact Factor 1.433).
  27. S Koley, PM Mohite, CS Upadhyay. Boundary layer effect at the free edge of fibrous composites using homogenization theory, Composites Part B - Engineering, 173, 2019, 106815 [Download pdf] (Impact Factor 6.864)
  28. S Koley, PM Mohite, CS Upadhyay. A micromechanical study and uncertainty quantification for effective properties of unidirectional fibre reinforced composites. Composite Structures, 225, 2019, 111141 [Download pdf] (Impact Factor 4.829).
  29. PR Krishna Mohan, Anil Kumar M, Shiva Goutham Kumar, PM Mohite. Development of in-house unidirectional Carbon/epoxy prepegs and its characterization for aerospace applications, Procedia Structural Integrity, 14, 2019, 176-183. (Impact Factor NA).
  30. D Kumar, GM Kamath, PM Mohite, S Kamle. Realization and Dynamic Studies of CNTs-PDMS Membranes for Biomimetic Flapping Wing Applications, Mechanics of Biological Systems and Micro-and Nanomechanics, 4, 2019, 35-37.
  31. David Kumar, PM Mohite, S Kamle. Dragonfly inspired nanocomposite flapping wing for micro air vehicles. Journal of Bionic Engineering, 2019, 16, 894-903. [Download pdf] (Impact Factor 2.463)
  32. Sachin Shrivastava, Hitesh Tilala, PM Mohite, MD Limaye. Optimal design of tapered wing panels laminates by ply-drop for fighter aircraft in aero-elastic constrained design environment. Structural and Multidisciplinary Optimization, https://doi.org/10.1007/s00158-020-02569-5. [Download pdf] (Impact Factor 3.925)
  33. Sachin Shrivastava, Naresh Sharma, Stephan W Tsai, PM Mohite. D and DD-drop layup optimization of aircraft wing panels under multi-load case design environment. Composite Structures, 248, 2020, 112518. [Download pdf] (Impact Factor 4.829)
  34. PRK Mohan, Anil Kumar M, CVS Nagarjun, PM Mohite. Representative volume element size determination for prepreg based discontinuous composites. Composite Structures, 252, 2020, 112633. [Download pdf] (Impact Factor 5.138)
  35. D Kumar, S T Goyal, Kamle, PM Mohite, EM Lau. Realization and testing of novel fully articulated bird-inspired flapping wings for efficient and agile UAVs. The Aeronautical Journal, Cambridge University Press (Accepted for publication) [Download pdf] (Impact Factor 0.663)
  36. S Koley, PM Mohite, CS Upadhyay. Boundary layer effect at the interface of cross ply laminates using homogenization theory, [submitted to IJNME (under review)]
  37. A Pradhan, S Koley, PM Mohite, CS Upadhyay. An ABAQUS Plugin to estimate the effective properties by generating representative volume element with randomly distributed fibres [Submitted to European Journal of Mechanics, A/Solids (under review)]
  38. A Bano, PM Mohite, A Kumar. Buckling response of laminated plates considering pre-buckled stress state under uni-axial uniform compression.[Submitted to Journal of Composite Materials (under review)] ()



 

Publications in Referred National Journals:

  1. Mohite PM and Upadhyay CS. A simple strain-recovery based a-posteriori error estimator for laminated composite plates, Journal of Aerospace Sciences and Technologies, Vol. 59(3), 2007; 212-222.



 

Proceedings in International Conferences:

  1. Mohite PM and Upadhyay CS. A study of various modeling approaches for analysis of laminated composite plates, International Congress on Computational Mechanics and Simulation, Dec 9-12, 2004, IIT Kanpur India. [Download pdf]
  2. Mohite PM and Upadhyay CS. Comparison of plate models for analysis of laminated composites, International Conference on Theoretical, Applied, Computational and Experimental Mechanics, Dec 28-30, 2004, IIT Kharagpur India. [Download pdf]
  3. Upadhyay CS, Mohite PM and Onkar AK. Accurate computation of critical response quantities for laminated composite structures, Indo-Japan Joint Conference, Feb 24-25, 2005, IIT Kanpur India. [Download pdf]
  4. Mohite PM and Upadhyay CS. Reliable computation of local quantities in composite laminated plates, Proceedings of the 46th AIAA/ ASME/ASCE/AHS/ASC Structures, Structural dynamics and materials conference, 18-21 April 2005, Austin, Texas (USA). [Download pdf]
  5. Mohite PM and Upadhyay CS. Reliable computation of pointwise data for laminated composite plates, Proceedings of  8th USNCCM Conference, 24-28 July 2005, Austin, Texas (USA). [Download pdf]
  6. Mohite PM and Upadhyay CS. Region-by-region modeling for layered composites, International Conference on Computational and Experimental Engineering and Sciences, 1-6 December 2005, IIT Madras India. [Download pdf]
  7. Mohite PM and Upadhyay CS. A novel subdomainwise modeling approach for analysis of layered composite structures, Proceedings of 47th AIAA/ ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials conference, 1-4 May 2006, Newport, Rhode Island (USA) [Among the first ten finalists in Students Paper Contest]. [Download pdf]
  8. Mohite PM and Upadhyay CS. Regionwise modeling approach for the analysis of layered structures, Proceedings of Tenth Enhancement and Promotion of Computational Methods in Engineering and Science International Conference. 21-23 August 2006, Sanya, Hainan Island of China. [Download pdf]
  9. Mohite PM. Continuum damage mechanics based response prediction in laminated composites under static damage, 2nd International Congress on Computational Mechanics (ICCMS-06), 8-10 December 2006, IIT Guwahati, India. [Download pdf]
  10. Upadhyay CS, Mohite PM, A Onkar. A discussion on some key issues related to computational analysis of laminated structures, [Invited Paper] 2nd International Congress on Computational Mechanics (ICCMS-06), 8-10 December 2006, IIT Guwahati, India. [Download doc]
  11. Mohite PM and Upadhyay CS. Finite element based adaptive modeling for layered composite structures, 48th AIAA/ ASME/ASCE/AHS/ASC Structures, Structural dynamics and materials conference, 23-26 April 2007, Waikiki, Hawaii (USA). [Download pdf]
  12. Mohite PM and Upadhyay CS. Static damage signatures for laminated composite plates, 49th AIAA/ASME/ASCE/AHS/ASC Structures, Structural dynamics and materials conference, 7-10 April 2008, Schaumburg, IL (USA). [Download pdf]
  13. Galucio CA, Mohite PM, Lubineau G, and Ladeveze P. Validation on intralaminar behaviour of the enhanced damage LMT-mesomodel, 13th European Conference on Composite Materials, Stockholm, Sweden from 2-5 June 2008. [Download pdf]
  14. Mohite PM, Lubineau G, Ladeveze P and Galucio CA. Damage LMT mesomodel and its validation, [Invited Paper] International Seminar on Composites for Aerospace Applications, Hindustan University, Chennai 24-26 March 2009.
  15. Mohite PM, Lubineau G, Ladeveze P and Galucio CA. Validation of intralaminar behaviour of the laminated composites by damage mesomodel, 50th AIAA/ASME/ASCE/AHS/ASC Structures, Structural dynamics and materials conference, Palm Springs, California, USA from 4-7 May 2009. [Download pdf]
  16. Mohite PM, Upadhyay CS. A generalized adaptive finite element analysis of laminated composite plates, 37th Solid Mechanics Conference, Warsaw, Poland, 6-10 September 2010. [Download Abstract pdf]
  17. Mohite PM, I Prasanna Kumar, S Kamle. Axial compressive strength testing of single carbon fibres, International Conference on Nano, Micro and Macro Composite Structures, Torino, Italy, 18-20 June 2012. [Download Abstract pdf]
  18. Bano A, Mohite PM, Kumar A. Buckling of laminated plates considering pre-buckled stress state, 8th European Solid Mechanics Conference, Graz, Austria, 9-13 July 2012. [Download Abstract pdf]
  19. Bano A, Mohite PM, Kumar A. Buckling of laminated plates with cutout using higher order theory, 4th International Congress on Computational Mechanics and Simulations, Hyderabad, India, 9-12 December 2012. [Download Abstract pdf]
  20. Singh Gurmeet, Mohite PM. Micromechanics Based Delamination Model for Polymer Matrix Fibrous Composites, 6th International Conference on Theoretical, Applied, Computational and Experimental Mechanics, IIT Kharagpur, India, 29-31 December 2014. [Download pdf]
  21. Harikrishnan R, Mohite PM. A Statistical Strength Study for T700 Carbon Fibres, 6th International Conference on Theoretical, Applied, Computational and Experimental Mechanics, IIT Kharagpur, India, 29-31 December 2014. [Download pdf]
  22. Harikrishnan R, Mohite PM. Statistical Strength Determination of Carbon Fibres Using a Generalized Weibull Model, 56th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Kissimmee, Florida, USA, 5-9 January 2015. [Download pdf]
  23. David Kumar, Vemuri SK, Goyal Tigmanshu, Mohite PM, Kamle Sudhir. Development and Aero-structural Analysis of Light and Strong Fiber-CNT/ PP Hummingbird Inspired MAV Wings, 33rd AIAA Applied Aerodynamics Conference, Aviation Forum, Dallas, Texas, USA 2015. [Download pdf]
  24. David Kumar, Goyal Tigmanshu, Vemuri SK, Mohite PM, Kamle Sudhir. Development and Analysis of Gull Inspired UAV Flapping Wing, 33rd AIAA Applied Aerodynamics Conference, Aviation Forum, Dallas, Texas, USA 2015. [Download pdf]

 

Proceedings in National Conferences:

  1. Mohite PM and Upadhyay CS. A posteriori estimation of error in the quantity of interest for laminated composite plates, Invited paper in National Conference on Mathematical Modelling and Computer Simulation, 14-15 November 2002, NAL, Bangalore India. [Download pdf]
  2. Mohite PM and Upadhyay CS. A continuum damage mechanics based damage initiation and evolution in laminated composites, 14th NASAS at VNIT Nagpur, 30-31 January 2006. Theme: Fracture, Fatigue and Ageing of Structures. [Download pdf]
  3. Mohite PM and Upadhyay CS. Accurate and computationally economical analysis tool for layered composites, Proceedings of National Seminar on Recent Trends in Product Design. 15-16 September 2006, Textile and Engineering Institute Ichalkaranji, India. [Download pdf]
  4. Jain A, Upadhyay CS and Mohite PM. Fibre breaking damage model for unidirectional fibrous composite using micromechanics, 16th NASAS at IIT Bombay, 19-20 November 2009. [Download pdf]
  5. Kushwaha SP, I Prasanna Kumar, S Kamle and Mohite PM. Longitudinal shear modulus of single aramid and carbon fibres by torsion pendulum tests, 17th NASAS at IIT Kanpur, 22-24 September 2011. [Download pdf]
  6. Mohite PM. Intralaminar damage modeling in fibrous composites: A micromechanical approach, Indo-French Seminar on High Performance Composites Aeronautics and Space Applications and Extreme Environments, Organized by CEFIPRA/IFCPAR (Indo-French Centre for Promotion of Advanced Research), November 30 - December 1, 2011, Bangalore (Invited Speaker).

 

Book Chapters:

  1. Kamle S, Kitey R, Mohite PM, Upadhyay CS, Venkatesan C, Yadav D. Some Fundamental Issues in the Design of Aircraft Structures. Indian Institute of Metals (IIM) Book Series.
  2. A Khechai, PM Mohite, A Tati, M-O Belarbi. Strength Improvement and Stress Analysis of E-Glass Laminated Plates with Circular Notches Using Digital Image Correlation. Book Chapter published (Open access) by IntechOpen.

HOME